Anemostat Product Selection Guide
-
Upload
horner-millwork -
Category
Documents
-
view
231 -
download
4
description
Transcript of Anemostat Product Selection Guide
® ®
www.anemostat.com
Product Selection GuideV
ISIO
N F
RAM
ESD
OO
R LO
UV
ERS
GLA
ZIN
G P
ROD
UCT
S
1220 Watson Center RoadCarson, California 90745-4206
310-835-7500 • Fax 310-835-0448E-mail [email protected]
V I S I O NF R A M E S
LoPro™
ProductDescription Material Finish Installation Door
ThicknessGlass
ThicknessFire
Ratings
Lo-ProfileMetal VisionFrame
20 GA (1mm) Grey Primer,Beige orBronze BakedEnamel
Self-Attachingwith sheetmetal screws
1-3/4" (44mm)Wood or MetalDoors
1/4" (6mm),3/16" (5mm) or5/16" (8mm)Fire and SafetyRated Glazing
UL and WHIup to 3 hours
BS-476.22up to 2 hours
EN-163430/60 min.Integrity andInsulation
LoPro™-IS Lo-ProfileMetal VisionFrame forSpecial Glassor DoorThickness
20 GA (1mm) Grey Primer,Beige orBronze BakedEnamel
Self-Attachingwith sheetmetal screws
1-3/8" - 2-3/8"(35 to 60 mm)Wood or MetalDoors
1/4” to 1”(6 to 25 mm)Fire and SafetyRated Glazing
UL and WHIup to 3 hours
BS-476.22up to 2 hours
EN-163430/60 min.Integrity andInsulation
LoFP Lo-ProfileRound MetalVision Frame
20 GA (1mm) Grey Primer,Beige orBronze BakedEnamel
Self-Attachingwith sheetmetal screws
1-3/4" (44mm)Wood or MetalDoors
1/4" (6mm),3/16" (5mm) or5/16" (8mm)Fire and SafetyRated Glazing
UL and WHIup to 3 hours
BS-476.22up to 2 hours
EN-163430/60 min.Integrity andInsulation
LoPro™-CS Lo-ProfileCustom ShapeMetal VisionFrame
20 GA (1mm) Grey Primer,Beige orBronze BakedEnamel
Self-Attachingwith sheetmetal screws
1-3/4" (44mm)Wood or MetalDoors
1/4" (6mm),3/16" (5mm) or5/16" (8mm)Fire and SafetyRated Glazing
UL and WHIup to 3 hours
BS-476.22up to 2 hours
EN-163430/60 min.Integrity andInsulation
LoPro™-IS-MB Metal VisionFrame with InternalWhite Mini-Blind 1” (25mm)Clear TemperedInsulated GlassUnit
20 GA (1mm) Vision Frame:Grey Primer,Beige orBronze BakedEnamel
Self-Attachingwith sheetmetal screws
1-3/4" (44mm)Wood or MetalDoors
1" InsulatedUnit withtempered glasstwo sides
NOT Fire Rated
Standard
Custom
Other Models AvailableLoPro™-IS-50/54 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lo-Profile Metal Vision Frame for Special Door ThicknessLoPro™-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lo-Profile Oval Metal Vision Frame
LoPro™-RC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lo-Profile Round Corner Metal Vision Frame
LoPro™-RD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lo-Profile Half Circle Metal Vision Frame
For more information or Optional Features consult factory, catalog or www.anemostat.comNOTE: For Exterior use, High Humidity or Salt Air Application, product must be Galvanized or Stainless Steel..com
V I S I O NF R A M E S
FGS-75
ProductDescription Material Finish Installation Door
ThicknessGlass
ThicknessFire
Ratings
Thru-BoltedMetal VisionFrame
18 GA (1.2mm) Grey Primer,Beige orBronze BakedEnamel
Thru-Bolts withholes drilledthru the door
1-3/4" (44mm)Wood or MetalDoors
1/4" (6mm)or3/16" (5mm)Fire and SafetyRated Glazing
UL and WHIup to 3 hours
FGS-IS Thru-BoltedMetal VisionFrame forSpecial Glassor DoorThickness
18 GA (1.2mm) Grey Primer,Beige orBronze BakedEnamel
Thru-Bolts withholes drilledthru the door
1-3/8" to 2-1/4"(35 to 57 mm)Wood or MetalDoors
5/16” to 2-1/16”(8 to 52 mm)Fire and SafetyRated Glazing
UL and WHIup to 3 hours
BFL-123 Self AttachingBeveled MetalVision Frame
18 GA (1.2mm) Grey Primer,Beige orBronze BakedEnamel
Self-Attachingwith sheetmetal screws
1-3/4" (44mm)Wood or MetalDoors
1/4" (6mm)or3/16" (5mm)Fire and SafetyRated Glazing
UL and WHIup to 3 hours
LoPro™-G Lo-ProfileMetal VisionFrame withFrench DoorGrilles
20 GA (1mm) Grey Primer,Beige orBronze BakedEnamel
Self-Attachingwith sheetmetal screws
1-3/4" (44mm)Wood or MetalDoors
1/4" (6mm),3/16" (5mm) or5/16" (8mm)Fire and SafetyRated Glazing
UL and WHIup to 3 hours
BS-476.22up to 2 hours
EN-163430/60 min.Integrity andInsulation
FM-G Framed MullionGrille forSidelites and BorrowedLites
StandardMullions are3/4" x 3/4" (19mm x19mm) steeltube material
Grey Primer,Beige orBronze BakedEnamel
Countersunkmountingholes allowscrews tofasten directlyinto the hollowmetal frame
For use insidelites orborrowed lites
Can be anythickness thatprovides a 3/4" (19mm)spacingallowance forFramed Mullionassembly
NOT Fire RatedDoes not affecta fire-ratedsidelite orborrowed lite
Special
Other Models AvailableFGS-38 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Metal Vision Frame for 1-3/8" DoorsFGS-DBL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Metal Vision Frame for Double GlazingBFL-75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thru Bolted Metal Vision Frame
BFL-75-PO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Metal Vision Frame for Post Office ObservationLoPro™-IS-G . . . . . . . . . . . . . . . . . . . . . . . . . . . Lo-Profile Metal Vision Frame with French Door Grilles for use with Special Glass or Door ThicknessesBFL-123-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Metal Vision Frame with French Door Grilles, Self AttachingFGS-75-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Metal Vision Frame with French Door Grilles, Thru Bolted
V I S I O NF R A M E S
For more information or Optional Features consult factory, catalog or www.anemostat.comNOTE: For Exterior use, High Humidity or Salt Air Application, product must be Galvanized or Stainless Steel..com
V I S I O NF R A M E S
BR-7
ProductDescription Material Finish Installation Door
ThicknessGlass
Thickness Ratings
Bullet andImpactResistant MetalVision Frame
Face Plate: 7 GA (4.5mm)
Back Frame: 12 GA (2.5mm)
Grey Primer,Beige orBronze BakedEnamel
Thru-Bolts withholes drilledthru the door
1-3/4" to 2-1/4"(44 to 57 mm)Metal Doors
up to 1-9/16"(40mm) Fire /Impact Safetyand/or BulletRated Glazing
FIRE:UL and WHIup to 90 min.
BULLET:.44 mag. and12 ga. shotgun
IMPACT:ASTM F-1450-97
SL-IS Metal VisionFrame withSecurity Grillefor Standard /Special Dooror GlassThickness
Frame: 18 GA (1.2mm)
SecurityGrille: 12 GA (2.5mm)
Grey Primer,Beige orBronze BakedEnamel
Thru-Bolts withholes drilledthru the door
1-3/4" to 2-3/8"(44 to 60 mm)Wood or MetalDoors
up to 1-9/16"(40mm) Fireand SafetyRated Glazing
UL and WHIup to 90 min.
LoPro™-SC-GR Lo-ProfileMetal VisionFrame withSecurity Grilleand OperatingSecurityCover
Frame: 20 GA (1mm)
Security Grilleand Cover:16 GA (1.5mm)
Grey Primer,Beige orBronze BakedEnamel
Self-Attachingwith sheetmetal screws
1-3/4" (44mm)Wood or MetalDoors
1/4" (6mm)or3/16" (5mm)Fire and SafetyRated Glazing
UL and WHIup to 3 hours
SG-12-LCP Security MetalVision Framewith LockingCuff Port /Food Pass
Frame: 12 GA (2.5mm)
SecurityCover: 16 GA (1.5mm)
Grey Primer,Beige orBronze BakedEnamel
Thru-Bolts withholes drilledthru the door
1-3/4" to 2-1/4"(44 to 57 mm)Wood or MetalDoors
up to 1-9/16"(40mm)Glazing
NOT Fire Rated
SSD Security Sliding Doorfor SelectiveVision intoHigh SecurityAreas
Channel Frameand SlidingDoor 12 GA (2.5mm)
Grey Primer,Beige orBronze BakedEnamel
Screws directlyinto door overpre-existingvision lite
3/4" (19mm)and up Woodor Metal Doors
Fits overglazing and/orvision frame
UL and WHIup to 90 min.
Security
Other Models AvailableSG-10 . . . . . . . . . . . . . High Security for Special Glass or Door ThicknessSL-FS . . . . . . . . . . Security Grille Both Sides with Stainless Steel ScreenSL-FS-LSC . . . . . . . . . . . . . . Same as SL-FS with Locking Security CoverFGS-MS-FR . . . . . . . . . . . . . . . . . . . . . . . . . . Impact and Security Resistant
SG-12-LSC . . . . . . . . . . . . . . High Security with Locking Security CoverFGS-75-SC . . . . . . . . . . . . . . . . . . . . . . . . . with Operating Security Cover
LoPro™-SC . . . . . . . . . . . . . . . . . . . . . . . . . . Lo-Profile with Security CoverSG-10-SP . . . . . . . . High Security with Double Speak Port (with Baffle)
SG-12-SP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . with Speak PortSG-12-SP-SSD . . . . . . . . . . . . with Speak Port and Security Sliding DoorSG-10-SP-SSD High Security with Speak Port and Security Sliding DoorLoPro™-SSD . . . . . . . . . . . . . . . . . . . Lo-Profile with Security Sliding Door
For more information or Optional Features consult factory, catalog or www.anemostat.comNOTE: For Exterior use, High Humidity or Salt Air Application, product must be Galvanized or Stainless Steel..com
G L A Z I N GP R O D U C T S
SAFE-Wire
UP TO 90 MIN.
UR LC
US
CLASSIFIED
®FROM
D-NT-HCAT II
FIRE & SAFETY GLAZINGR13236 48S1
SAFE-Wire™
ProductDescription Material Vision Frame
Model Installation ClassificationMarkings
FireRatings
OtherRatings
1/4" (6mm)with SafetyFilm
Fire / SafetyRated
Polished wireglass (diamondpattern) withsurface appliedsafety film
LoPro with GT-18,1/8" (3.2mm)fire ratedglazing tape (supplied loose)to both sidesof glass
Permanentlyetched withU.L. mark incompliancewith NFPA-80revised
up to 90 min. Category IIImpact / SafetyRated
CLASSIFIED
®UL
Glazing Material9FX5
U. S. A.
FROM
Pyrodur™ 9/32" (7mm)Clear
20 minuteFire / SafetyRated
Laminatedglass with aspecialinterlayer
LoPro with GT-116,1/16" (1.6mm)fire ratedglazing tape(supplied loose)to both sides ofglass. Interioruse only.
Permanentlyetched withU.L. mark incompliancewith NFPA-80revised
20 minute Category IImpact / SafetyRated
FireLite® NT
CAT IIR13236 48SI
GLAZING MATERIAL
from
CLASSIFIED BYR
UP TO 90 MIN.
FireLite® NT 3/16" (5mm)Clear withSafety Film
Fire / SafetyRated
Clear ceramicw/ 3M surfaceapplied film.
STANDARD:slight distortion
PREMIUM: maximum clarity
LoPro with GT-18,1/8" (3.2mm)fire ratedglazing tape (supplied loose)to both sidesof glass
Permanentlyetched withU.L. and WHImark incompliancewith NFPA-80revised
up to 3 hours Category IIImpact / SafetyRated
R
FireLite Plus
CAT IIR13236 48SI
GLAZING MATERIAL
from
CLASSIFIED BYR
UP TO 90 MIN.
FireLite® Plus 5/16" (8mm)LaminatedClear
Fire / SafetyRated
Clear ceramiclaminated with2 pieces ofPREMIUMFireLite and aproprietaryinterlayer
LoPro with GT-132,1/32" (.793mm)fire ratedglazing tape (supplied loose)to both sidesof glass
Permanentlyetched withU.L. and WHImark incompliancewith NFPA-80revised
up to 3 hours Category IIImpact / SafetyRated
FireLite® IGU 1" (25mm)Insulated Unit
Fire / SafetyRated
Insulated unit,incorporates5/16" (8mm)FireLite Pluswith 1/4" (6mm)Tempered Glass
LoPro-IS with GT-132,1/32" (.793mm)fire ratedglazing tape (supplied loose)to both sidesof glass
Permanentlyetched withU.L. mark incompliancewith NFPA-80revised
up to 3 hours Category IIImpact / SafetyRated
Pyrostop® 3/4" (19mm)to 2-3/8"(62mm) Clear
Fire / SafetyRated
Uses multiplelayers of floatglass,laminated withtransparentintumescentinterlayers
LoPro-IS orFGS-IS (over 1"(25mm)thickness)
with GT-116,1/16" (1.6mm)fire ratedglazing tape toboth sides ofglass. Glaze w/setting blocksto support theglass
Permanentlyetched withU.L. mark incompliancewith NFPA-80revised
up to 2 hours Category IIImpact / SafetyRated
STC Rated: 40 - 46 dB
Bullet Rated:Level 1 to Level 3
Fire and Safety Rated
For more information or Optional Features consult factory, catalog or www.anemostat.comNOTE: Must be used in an appropriately tested door assembly..com
G L A Z I N GP R O D U C T S
ANSI Z97.1 2004
16 CFR 1201 CAT II
SOLID TEMPERED
Tempered
ProductDescription Material Vision Frame
Model Installation ClassificationMarkings
FireRatings
OtherRatings
1/4" (6mm)Safety Rated
Clear heatstrengthenedglass. Alsoavailable inbronze, gray orgraylite.
LoPro with GT-18,1/8" (3.2mm)glazing tape toboth sides ofglass
ANZI Z97.1 200416 CFR 1201
NOT Fire Rated
Category IIImpact / SafetyRated
Glazing Tape 1/32" (.793mm)1/16" (1.6mm)1/8" (3.2mm)Closed Cell FoamSealant
Closed cellpolyvinylchloride foamtape withpressuresensitiveadhesive twosides
All models.Tape thicknesswill vary basedon model, andglass thicknessused
Peels off rolland is placeddirectly ontoclean surfaceof vision frameor glass
U.L., WHI, BS 476.22 andEN-1634
up to 3 hours N/A
Lexan® MR-10 1/8" (3mm)1/4" (6mm)3/8" (9.5mm)1/2" (12.7mm)Polycarbonate
Impact Rated
Strength ofLEXAN with aproprietaryabrasion andUV resistantMargard® IIcoating onboth sides
Various modelsbased onimpact, orsecurityapplication,and glazingthicknessrequired
Directly intovision frame orhollow metalframe
N/A NOT Fire Rated
Category IIImpact / SafetyRated
MP-750 3/4" (19mm)BulletResistant andForced EntrySecurityGlazing
Clear, 3-plyLEXANPolycarbonatewith acrylicsheet andbondinginterlayer
BR-7 or SG-10 Directly intovision frame
N/A NOT Fire Rated
Bullet Rated:.38 super ASTM F1233-93,
U.L. 752 Level 1(9mm)
HPW-TP-0.500.00Level B (9mm)
SP-1250 1-5/16"(33mm)BulletResistant andForced EntrySecurityGlazing
Clear, 4-plyLEXANPolycarbonatewith bondinginterlayers
BR-7 Directly intovision frame
N/A NOT Fire Rated
Bullet Rated:.44 magnumASTM F1233-93,U.L. Level 3, HPW-TP Level C
Bomb Blast:Approx. 4300lbs. TNT/115 ft.,57 psi/15 msec.
Safety Rated
Security - Impact Rated
Other Products AvailableWire Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" (6mm) Fire Rated - NON Impact / Safety Rated
FireLite® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/16" (5mm) Clear, Fire Rated - NON Impact / Safety Rated
Fireglass 20® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" (6mm) Clear, 20 Minute Fire Rated - Category II Impact / Safety RatedTempered IGU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1" (25mm) Insulated Glass Unit - Category II Impact / Safety Rated
G L A Z I N GP R O D U C T S
For more information or Optional Features consult factory, catalog or www.anemostat.comNOTE: Must be used in an appropriately tested door assembly..com
D O O RL O U V E R S
ProductDescription Material Finish Installation Door
ThicknessFire
Ratings
Standard
AFDL Non-VisionInverted “Y”Louver
Frame: 18 GA (1.2mm)
Blades: 22 GA (.75mm)
Grey Primer, Beigeor Bronze BakedEnamel
Self-Attachingwith sheet metalscrews
1-3/8" to 2-1/8"(35 to 54 mm)Wood or MetalDoors
NOT Fire Rated
FLDL-UL Fire Rated FusibleLink Louver
18 GA (1.2mm) Grey Primer, Beigeor Bronze BakedEnamel
Self-Attachingwith sheet metalscrews
1-3/4" to 2-1/2"(44 to 64 mm)Wood or MetalDoors
ULup to 90 min.
BS-476.22up to 2 hours
CHDL Non-VisionInverted “V”Louver
Core Only
22 GA (.75mm) Grey Primer, Beigeor Bronze BakedEnamel
Installs into dooror sidelite usingwood or metalstops (by others)on one or bothsides of the louvercore.
1-1/16" (27mm)core thicknessplus width ofstops used onboth sides of thecore
NOT Fire Rated
PLSL Louver withSecurity Grille,Non-VisionInverted Split “Y”
Frame: 12 GA (2.5mm)
Security Grille: 12 GA (2.5mm)
Blades: 18 GA (1.2mm)
Grey Primer, Beigeor Bronze BakedEnamel
Thru-Bolts withholes drilled thruthe door
1-3/8" to 2-1/2"(35 to 64 mm)Wood or MetalDoors
NOT Fire Rated
FLDL-UL-SG2 Fire RatedFusible LinkLouver withSecurity GrilleBoth Sides
Frame: 12 GA (2.5mm)
Security Grille: 12 GA (2.5mm
Blades: 18 GA (1.2mm)
Grey Primer, Beigeor Bronze BakedEnamel
Self-Attachingwith sheet metalscrews
1-3/4" to 2-1/2"(44 to 64 mm)Wood or MetalDoors
ULup to 90 min.
BS-476.22up to 2 hours
Other Models AvailableAFDL-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transom Louver - Core OnlyFDLS . . . . . . . . . . . . . . . . . . . . . . . . . . . Inverted Split “Y” Non-Vision LouverCHDL-1F . . Inverted “V” Non-Vision Louver - Louver Core, Frame One SideCHDL-2F . . Inverted “V” Non-Vision Louver - Louver Core, Frame Both SidesDRDL . . . . . . . . . . . . . . . . . . . . . . . . Double Inverted “V” - Darkroom LouverADL. . . . . . . . . . . . . . . . . . . . . . . . Operating (Open/Close) “Z” Blade Louver
SRDL . . . . . . . . . . . . . . . . . . . . . . . Storm Proof, Extruded Aluminum LouverFPL-1 . . . . . . . . . . . . . . . . . Fixed Position Self Attaching “Z” Blade LouverFPL-2 . . . . . . . . . . . . . . . . . . . Fixed Position Thru Bolted “Z” Blade LouverDSFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Security Grille Face PlateFLDL-UL-SG1 . . . . . . Fusible Link Louver with Security Grille One Side
Special
Security
D O O RL O U V E R S
For more information or Optional Features consult factory, catalog or www.anemostat.comNOTE: For Exterior use, High Humidity or Salt Air Application, product must be Galvanized or Stainless Steel..com
E D G E S A N DA S T R A G A L S
ProductDescription Material Finish / Species Installation Door
ThicknessFire
Ratings
Standard
FMEA/DE-FMEA Metal Edge andAstragal (set)
Edges: 20 GA (1mm)
Astragal: 18 GA (1.2mm)
Grey Primer, Beigeor Bronze BakedEnamel
Screws directlyinto door edgewith sheet metalscrews
1-3/4" (44mm)Wood or MetalDoors
UL and WHIup to 90 min.
FME/DE-FME Metal Edges (pair) Edges: 20 GA (1mm)
Grey Primer, Beigeor Bronze BakedEnamel
Screws directlyinto door edgewith sheet metalscrews
1-3/4" (44mm)Wood or MetalDoors
UL and WHIup to 90 min.
FMA/DE-FMA Metal Astragal(each)
Edge: 20 GA (1mm)
Astragal: 18 GA (1.2mm)
Grey Primer, Beigeor Bronze BakedEnamel
Screws directlyinto door edgewith sheet metalscrews
1-3/4" (44mm)Wood or MetalDoors
UL and WHIup to 90 min.
WV-FMEA Wood Veneerover Metal Edgeand Astragal (set)
Edges: Real Wood Veneerover 20 GA (1mm)
Astragal: Real Wood Veneerover 18 GA (1.2mm)
Unfinished RedOak, Natural Birchand Mahogany
Screws directlyinto door edgewith sheet metalscrews
1-3/4" (44mm)Wood or MetalDoors
WHIup to 90 min.
WV-FME Wood Veneerover Metal Edge(pair)
Edges: Real Wood Veneerover 20 GA (1mm)
Unfinished RedOak, Natural Birchand Mahogany
Screws directlyinto door edgewith sheet metalscrews
1-3/4" (44mm)Wood or MetalDoors
WHIup to 90 min.
Hinge Edge Guard(each)
Edges: 18 GA (1.2mm)#304 stainlesssteel
#4 finish (satin) Fits over hingeedge of doorusing sheet metalscrews
1-3/4" (44mm)Wood or MetalDoors
UL and WHIup to 90 min.
Special
HEG-MHEG
PSG - 7.09
For more information or Optional Features consult factory, catalog or www.anemostat.comNOTE: For Exterior use, High Humidity or Salt Air Application, product must be Galvanized or Stainless Steel..com