Anchor Diamond - AG€¦ · Anchor blocks are manufactured under licence from Anchor Wall Systems....
Transcript of Anchor Diamond - AG€¦ · Anchor blocks are manufactured under licence from Anchor Wall Systems....
Dry-build retaining walls with a ‘naturally textured’ finish
Anchor Diamond
COLOURS
COLOURS
BASALT CASHEL
CANELLETTO
Frost Resistant
No Reinforcement Diamond 30
<1.2m
Ancho
r D
iamo
nd®
colo
ursretaining w
alls
435 x 150mm
200 x 75mm
CORRIB
AG.UK.COM T 028 8778 4208 | GB Sales T 0121 747 0202 | E [email protected] 015
SPECIFICATION REFERENCE: NBS PLUS: 45-25-66/320 Precast concrete interlocking blocks D41 Crib walls, gabions and other gravity retaining walls - 310 DRYSTACK INTERLOCKING MASONRY
TECHNICAL INFORMATION
STANDARDS + PERFORMANCEOur segmental retaining wall products are regularly tested to record important physical characteristics and to comply with product specific performance criteria. The durability and performance of Anchor blocks is assured by meeting or exceeding targets for compression strength and water absorption.
If you need further assistance in this respect please consult our Technical Specification Department.
Product Type Dry-build retaining walls with a ‘naturally textured’ finish
Manufactured to BS EN 771-3:2011+A1:2015 - Specification for masonry units.
Efflorescence State-of-the-art factory controlled vapour curing significantly reduces this naturally occurring chemical reaction
SUSTAINABILITYEnergy Use 100% renewableWater Used 100% rain water harvestingRecyclable 100% of this product can be recycledManufacturing Produced in the UK using responsibly
sourced materialsRecycled Aggregate Content: 65%Waste Wood + Plastic: 100% recycledCarbon Footprint We have a new state-of-the-art
washing plant which enables AG to produce walling from 100% recycled waste aggregate. Please contact our Technical Specification Department if you are interested in specifying such a product
BREEAM ‘A’ Rating – in accordance with the BRE Green Guide to Specification.
AG RECOMMENDATIONS
Colour blending
Products should be mixed on site from a minimum of 3 packs to help reduce the effect of banding.
ADVICE + GUIDANCEFor advice and guidance on ordering, installation, good site practice, etc. visit our website: professional.ag.uk.com/advice+guidance
For maintenance guidance and health and safety advice visit our website: professional.ag.uk.com/maintenance
FEATURES + BENEFITS• Built with no mortar or concrete, the unique dry-build
locking system allows fast-track construction in all weathers – that means quicker installation rates than traditional brick and blockwork.
• Features a patented rear lip that acts as a guide to ensure accurate alignment and precise set back every time without the need for mortar.
• Mortarless and pinless (fast-track construction).
• Diamond® 30 can be built up to 1.2m high with no geogrid.
• The capping block is shaped asymmetrically (tapered), making capping straight or curved walls much easier.
• Installation of the capping block will be easier and quicker as the shape of the capping piece minimises the need for cuts.
GRAVITY / ENGINEEREDDiamond 30 Gravity (max 1.2m provided the ground behind the wall is no greater than a 1:3 slope). Engineered (above 1.2m).
LICENCEAnchor blocks are manufactured under licence from Anchor Wall Systems.
Frost Resistant
No Reinforcement Diamond 30
<1.2m
Ancho
r D
iamo
nd®
technical inform
ation
retaining walls
435 x 150mm
200 x 75mm
Dry-build retaining walls with a ‘naturally textured’ finish
Anchor Diamond
AG.UK.COM T 028 8778 4208 | GB Sales T 0121 747 0202 | E [email protected] 015
MANUFACTURING
Anchor segmental retaining wall blocks are manufactured from locally sourced, high grade aggregates. Using the latest computerized mixing systems ensures colour and strength consistency. The weathered finish of the Diamond® range is due to the most modern computer-controlled manufacturing process. POM: Made at our Fivemiletown production plant.
CERTIFICATION
ISO 9001 Quality Management.ISO 14001 Environmental Management.ISO 45001 Occupational Health and Safety Management.CE Marking Download our Declaration of Performance (DOP)
data at: www.ag.uk.com/cemarking
STOCK, INSTALLATION + MANUFACTURING INFORMATIONA
nchor
Diam
ond
® sto
ck inform
ation
retaining walls
435 x 150mm
200 x 75mm
Frost Resistant
No Reinforcement Diamond 30
<1.2m
Dry-build retaining walls with a ‘naturally textured’ finish
Anchor Diamond
AG.UK.COM T 028 8778 4208 | GB Sales T 0121 747 0202 | E [email protected] 015
Producttype
Length(mm)
Depth(mm)
Height(mm)
InStock
Available Colours
m2 per pack
Units per pack
Unit weight(kg)
Weight per pack (t)
Packs per 8 wheeler
Packs per unit lorry
DIAMOND 30 BLOCK
435* 300 150Yes Basalt
3.5 54 26 1.44 10 IRE 16 / GB 19MTO Cashel / Canelletto / Corrib
CORNER BLOCK 435 218 150Yes Basalt
N / A 48 29.5 1.44 10 IRE 16 / GB 19MTO Cashel / Canelletto / Corrib
SHORTCUT CAP 200** 330 75Yes Basalt
N / A 120 10.3 1.236 10 IRE 16 / GB 21MTO Cashel / Canelletto / Corrib
* The Diamond 30 Block ‘short side’ 280mm in length.** The Short Cut cap ‘short side’ 175mm in length. MTO - Made to order (minimum quantity required)
STOCK INFORMATION
BlocksSet back / Face angle(degrees)
Minimum inside radius (to back of block on bottom course)
Minimum outside radius (to back of block on bottom course)
Tolerances on all dimensions (m)
Compressive strength*
Face finish
Face geometry
no. per m2 / lm
DIAMOND 30 BLOCK
10.6° 2.7m 0.9m ±2mm 24 N/mm2 Straight cut stretcher 15.4
CORNER BLOCK N / A N / A N / A ±2mm 24 N/mm2 Straight cut stretcher N / A
SHORTCUT CAP N / A N / A N / A ±2mm N / A Straight split stretcher 5.4
INSTALLATION DATA
PROFILES
The stone face is naturally textured to give the wall the appearance of natural cut stone.
PROFILES
Frost Resistant
No Reinforcement Diamond 300
<1.2m
Dry-build retaining walls with a ‘naturally textured’ finish
Anchor Diamond
Ancho
r D
iamo
nd®
pro
files
retaining walls
435 x 150mm
200 x 75mm
DIAMOND® 30 BLOCK
150
300
435
280
218
150
435
435
CORNER BLOCK
SHORT CUT CAP
175
200
330
75
AG.UK.COM T 028 8778 4208 | GB Sales T 0121 747 0202 | E [email protected] 015