Analysis
description
Transcript of Analysis
![Page 1: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/1.jpg)
1
Analysis
C7.4 – Analytical Procedures
![Page 2: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/2.jpg)
2
What do I need to know?
1. Recall the difference between qualitative and quantitative methods of analysis.
2. Describe how analysis must be carried out on a sample that represents the bulk of the material under test
3. Explain why we need standard procedures for the collection, storage and preparation of samples for analysis
![Page 3: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/3.jpg)
3
Qualitative vs. Quantitative
• A qualitative test is usually very quick. It can give vital information without needing to wait too long for it.
• A quantitative test gives precise values, for example for a concentration in Moldm-3
• Examples of qualitative tests include universal indicator, silver nitrate for halide ions and bromine water for unsaturation.
• Examples of quantitative tests include titration, chromatography and spectroscopy.
![Page 4: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/4.jpg)
4
Which sample should I test?
• It is important that the sample represents the bulk of the material under test.
• You may chose to test more than one sample from a range of points to ensure that you have results which represent the whole.
• For example is it well mixed? Are their pockets of higher concentration/different composition?
![Page 5: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/5.jpg)
5
Chemical industry• Analysis of samples is crucial to the chemical industry to
ensure the quality of the chemicals they are manufacturing. Some are analysed numerous times a day or even within an hour.
• To maintain consistency it is essential that we use standard procedures to:o collect the sampleo store the sampleo prepare the sample for analysiso analyse the sample.
![Page 6: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/6.jpg)
6
Chromatography
C7.4 – paper chromatography
![Page 7: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/7.jpg)
7
Chromatography
![Page 8: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/8.jpg)
8
Solvents
1. The mobile phase is the solvent – the part that moves
2. In paper chromatography it is water or ethanol
![Page 9: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/9.jpg)
9
Paper/column
1. The stationary phase is the paper in paper chromatography or the column in gas chromatography.
2. In thin layer chromatography it is silica gel on a glass plate
3. The stationary phase does not move.
![Page 10: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/10.jpg)
10
How does the technique work?
In chromatography, substances are separated by movement of a mobile phase through a stationary phase.
Each component in a mixture will prefer either the mobile phase OR the stationary phase.
The component will be in dynamic equilibrium between the stationary phase and the mobile phase.
![Page 11: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/11.jpg)
11
Substance A• This is substance A
• Substance A prefers the stationary phase and doesn’t move far up the paper/column.
• The equilibrium lies in favour of the stationary phase.
![Page 12: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/12.jpg)
12
Substance B• This is substance B
• Substance B prefers the mobile phase and moves a long way up the paper/column
• The equilibrium lies in favour of the mobile phase
![Page 13: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/13.jpg)
13
Using a reference
• In chromatography we can sometimes use a known substance to measure other substances against.
• This will travel a known distance compared to the solvent and is known as a standard reference.
![Page 14: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/14.jpg)
14
Advantages of TLC
TLC has a number of advantages over paper chromatography.
It is a more uniform surface chromotograms are neater and easier to interpret
Solvent can be used which is useful if a substance is insoluble in water.
![Page 15: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/15.jpg)
15
Past Paper Questions
![Page 16: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/16.jpg)
16
Past paper question
![Page 17: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/17.jpg)
17
Mark scheme
![Page 18: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/18.jpg)
18
Describing how chromatography works – exam definition
• stationary phase is paper and mobile phase is solvent / mobile phase moves up through stationary phase (1)
• for each compound there is a dynamic equilibrium between the two phases (1)
• how far each compound moves depends on its distribution between the two phases (1)
![Page 19: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/19.jpg)
19
Using an Rf value
• In order to be more precise we can use measurements on the TLC plate to compare the distance travelled by our substance (the solute) with the distance travelled by the solvent.
• The Rf value is constant for a particular compound.• The distance travelled however could be different
on different chromatograms.• The Rf value is always less than 1.
![Page 20: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/20.jpg)
20
Rf value
![Page 21: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/21.jpg)
21
Example questionThis question relates to the chromatogram shown in the earlier question. Refer back…
![Page 22: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/22.jpg)
22
Mark scheme
![Page 23: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/23.jpg)
23
Example question
![Page 24: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/24.jpg)
24
Mark scheme
![Page 25: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/25.jpg)
25
Past paper question
![Page 26: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/26.jpg)
26
![Page 27: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/27.jpg)
27
![Page 28: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/28.jpg)
28
![Page 29: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/29.jpg)
29
Mark scheme
![Page 30: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/30.jpg)
30
Gas-liquid chromatography
C7.4 GLC
![Page 31: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/31.jpg)
31
What do I need to know?
1. recall in outline the procedure for separating a mixture by gas chromatography (gc);
2. understand the term retention time as applied to gc;
3. interpret print-outs from gc analyses.
![Page 32: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/32.jpg)
32
Gas chromatography
• The mobile phase is an unreactive gas known as the carrier gas this is usually nitrogen
• The stationary phase is held inside a long column and is lots of pieces of inert solid coated in high bp liquid.
• The column is coiled in an oven
• The sample to be analysed is injected into the carrier gas stream at the start of the column.
![Page 33: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/33.jpg)
33
GC
![Page 34: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/34.jpg)
34
GC analysis• Each component of the sample mixture has a different
affinity for the stationary phase compared with the mobile phase
• Therefore each component travels through the column in a different time.
• Compounds favouring the mobile phase (usually more volatile) emerge first.
• A detector monitors the compounds coming out of the column and a recorder plots the signal as a chromatogram
![Page 35: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/35.jpg)
35
GLC Chromatograph
![Page 36: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/36.jpg)
36
Interpretation
• The time in the column is called the retention time
• Retention times are characteristic so can identify a compound
• Area under peak or relative heights can be used to work out relative amounts of substances
![Page 37: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/37.jpg)
37
The key points – revise this!
• the mobile phase carries the sample (1) • components are differently attracted to the
stationary and mobile phases (1) • the components that are more strongly attracted
to the stationary phase move more slowly (1) • the amount of each component in the stationary
phase and in the mobile phase is determined by a dynamic equilibrium (1)
![Page 38: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/38.jpg)
38
Past paper question
![Page 39: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/39.jpg)
39
![Page 40: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/40.jpg)
40
![Page 41: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/41.jpg)
41
![Page 42: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/42.jpg)
42
Mark scheme
![Page 43: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/43.jpg)
43
Titration
C7.4
![Page 44: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/44.jpg)
44
What do I need to know?
1. Calculate the concentration of a given volume of solution given the mass of solvent;
2. Calculate the mass of solute in a given volume of solution with a specified concentration;
3. Use the balanced equation and relative formula-masses to interpret the results of a titration;
![Page 45: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/45.jpg)
45
Concentration• We can measure the concentration of solution in grams/litre. This is the
same as g/dm3
• 1dm3 = 1000cm3
• If I want to make a solution of 17 g/dm3 how much will I dissolve in 1dm3.
• 17 g
• If I want to make a solution of 17g/dm3 but I only want to make 100cm3 of it how much will I dissolve?
• 1.7g
![Page 46: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/46.jpg)
46
Making standard solutions
• For a solution of 17g/dm3
• First I will measure 17g of solid on an electronic balance
![Page 47: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/47.jpg)
47
Making standard solutions
• Now I must dissolve it in a known 1dm3 of water.
• I transfer it to a volumetric flask and fill up with distilled water to about half the flask.
• I then swirl to dissolve• Top up with a dropping pipette so that the
meniscus is on the line.
![Page 48: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/48.jpg)
48
How much to dissolve?
• Worked example:
• I want to make 250cm3 of a solution of 100g/dm3.
• How much solid do I transfer to my 250cm3 volumetric flask?
![Page 49: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/49.jpg)
49
How much to dissolve?
Worked example:I want to make 250cm3 of a solution of 100g/dm3.
1. Work out the ratio of 250cm3 to 1000cm3
250/1000 = 0.25
2. I therefore need 0.25 of 100g in 250cm3 which is 0.25x100=25g
![Page 50: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/50.jpg)
50
General rule
![Page 51: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/51.jpg)
51
Practie - how much to dissolve?
• I want to make 250cm3 of a solution of 63.5g/dm3.
• How much solid do I transfer to my 250cm3 volumetric flask?
• 250/1000 x 63.5 = 15.9 g
![Page 52: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/52.jpg)
52
Practice - how much to dissolve?
• I want to make 100cm3 of a solution of 63.5g/dm3.
• How much solid do I transfer to my 100cm3 volumetric flask?
• 100/1000 x 63.5 = 6.35 g
![Page 53: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/53.jpg)
53
Concentration from mass and volume
We need to rearrange this:
To give
![Page 54: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/54.jpg)
54
What is the concentration of?
1. 12g dissolved in 50cm3
2. 50g dissolved in 100cm3
3. 47g dissolved in 1000cm3
4. 200g dissolved in 250cm3
![Page 55: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/55.jpg)
55
What is the concentration of?
1. 12g dissolved in 50cm3
= 1000/50 x 12= 240g/dm3
2. 50g dissolved in 100cm3
=1000/100 x 50 = 500g/dm3
3. 47g dissolved in 1000cm3
= 1000/1000 x 47= 47g/dm3
4. 200g dissolved in 250cm3
1000/250 x 200= 800g/dm3
![Page 56: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/56.jpg)
56
Solutions from stock solutions
Stock solution•highest concentration
•use to make other solutions
Extract a portion of stock solution•as calculated
Dilute with distilled water•Making a known volume of a lower concentration
![Page 57: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/57.jpg)
57
Making solutions from stock solutions
If I have a solution containing 63g/dm3, how do I make up 250cm3 of a solution of concentration 6.3g/dm3?
To make 1dm3 of 6.3g/dm3 I would need 100cm3
To make 250cm3 of 6.3g/dm3 I would therefore need 25cm3
and make it up to 250cm3 with distilled water
![Page 58: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/58.jpg)
58
Working out masses
• We can use the useful relationship
• Where Mr is the molecular mass• eg Mr of NaOH is (23 + 16 + 1) = 40• This can help us to calculate an unknown mass
![Page 59: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/59.jpg)
59
Titration calculations
• In a titration we have added a known amount of one substance usually an acid (in the burette) to a known amount of another substance usually an alkali (in the conical flask).
• The amount added allows us to determine the concentration of the unknown.
![Page 60: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/60.jpg)
60
Titration equipment
![Page 61: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/61.jpg)
61
Using a table
• It can be helpful to sketch a table to keep track of information you know…
Value Acid Alkali
Volume (cm3)
Mass (g)
Concentration (g/dm3)
Molecular weight (Mr)
![Page 62: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/62.jpg)
62
![Page 63: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/63.jpg)
63
Mark scheme
![Page 64: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/64.jpg)
64
![Page 65: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/65.jpg)
65
Mark scheme
![Page 66: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/66.jpg)
66
Uncertainty
• Uncertainty is a quantification of the doubt about the measurement result.
• In a titration the uncertainty is the range of the results.
• If results are reliable then it will be within 0.2cm3
• NOTE THAT THIS IS RELIABLE NOT NECESSARILY ACCURATE
![Page 67: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/67.jpg)
67
![Page 68: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/68.jpg)
68
Mark scheme
![Page 69: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/69.jpg)
69
![Page 70: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/70.jpg)
70
Mark scheme
![Page 71: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/71.jpg)
71
C7.5 Green Chemistry
The Chemical Industry
![Page 72: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/72.jpg)
72
What do I need to know?
1. Recall and use the terms 'bulk' (made on a large scale) and 'fine' (made on a small scale) in terms of the chemical industry with examples;
2. Describe how new chemical products or processes are the result of an extensive programme of research and development;
3. Explain the need for strict regulations that control chemical processes, storage and transport.
![Page 73: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/73.jpg)
73
Bulk processes• A bulk process manufactures large
quantities of relatively simple chemicals often used as feedstocks (ingredients) for other processes.
• Examples include ammonia, sulfuric acid, sodium hydroxide and phosphoric acid.
• 40 million tonnes of H2SO4 are made in the US every year.
![Page 74: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/74.jpg)
74
Fine processes• Fine processes manufacture smaller
quantities of much more complex chemicals including pharmaceuticals, dyes and agrochemicals.
• Examples include drugs, food additives and fragrances
• 35 thousand tonnes of paracetamol are made in the US every year.
![Page 75: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/75.jpg)
75
Example question
![Page 76: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/76.jpg)
76
Mark scheme
![Page 77: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/77.jpg)
77
Research and Development
• All chemicals are produced following an extensive period of research and development.
• Chemicals made in the laboratory need to be “scaled up” to be manufactured on the plant.
![Page 78: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/78.jpg)
78
Research in the lab
![Page 79: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/79.jpg)
79
Examples of making a process viable
• Trying to find suitable conditions – compromise between rate and equilibrium
• Trying to find a suitable catalyst – increases rate and cost effective as not used up in the process.
![Page 80: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/80.jpg)
80
Catalysts
• Can you give a definition of a catalyst?• A substance which speeds up the rate of a
chemical reaction by providing an alternative reaction pathway.
• The catalyst is not used up in the process• Catalysts can control the substance formed eg
Ziegler Natta catalysts.
![Page 81: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/81.jpg)
81
Regulation of the chemical industry
• Governments have strict regulations to control chemical processes
• Storage and transport of chemicals requires licenses and strict protocol.
• Why?
• To protect people and the environment.
![Page 82: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/82.jpg)
82
Example question
![Page 83: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/83.jpg)
83
Mark scheme
![Page 84: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/84.jpg)
84
Process development
preparation of
feedstockssynthesis separation
of products
handling of by-products and wastes
monitoring of purity
![Page 85: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/85.jpg)
85
Example question – part 1
![Page 86: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/86.jpg)
86
Example question part - 2
![Page 87: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/87.jpg)
87
Mark scheme
![Page 88: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/88.jpg)
88
Example question – part 3
![Page 89: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/89.jpg)
89
Mark scheme
![Page 90: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/90.jpg)
90
Factors affecting the sustainability of a process
Sustainability
renewable feedstock
atom economy
type of waste and disposal
energy inputs and outputsenvironmental
impacthealth and safety risks
social and economic benefits
![Page 91: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/91.jpg)
91
Example question
![Page 92: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/92.jpg)
92
Mark scheme
![Page 93: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/93.jpg)
93
Atom economy
![Page 94: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/94.jpg)
94
Atom economy calculationFor example, what is the atom economy for making hydrogen by reacting coal with steam?
Write the balanced equation:
C(s) + 2H2O(g) → CO2(g) + 2H2(g)
Write out the Mr values underneath:
C(s) + 2H2O(g) → CO2(g) + 2H2(g)
12 2 × 18 44 2 × 2
Total mass of reactants 12 + 36 = 48gMass of desired product (H2) = 4g
% atom economy = 4⁄48 × 100 = 8.3%
![Page 95: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/95.jpg)
95
Exam
ple
ques
tion
![Page 96: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/96.jpg)
96
Example question – part 2
![Page 97: Analysis](https://reader035.fdocuments.in/reader035/viewer/2022062501/56815ce3550346895dcae7a4/html5/thumbnails/97.jpg)
97
Mark scheme