An ISO 9001- 2000 Company
Transcript of An ISO 9001- 2000 Company
An ISO 9001- 2000 CompanyH.O & Factory : Survey No. 222/1, Che r l apa l l y Road , EC I L Po s t , Hyderabad - 500 062. A.P., India.Ph.: 0091 - 40- 27123508, 27126833, 27121828, Fax : 040 - 27120558.Email : [email protected] k l r 4 0 0 0 @ k l r u n i v e r s a l . c o m website : www.klruniversal.com
DTH-100 with 10 ft channel mast mounted on TATA-404 Truck with water
injection pump (36 LMP), hydraulic Oil cooler, Single Rod changer etc.
Compressor- 650 CFM @200 PSI
Max Drilling Depth :- 6.5’’-100 Mtrs., 4.5’’ upto 150 Mtrs.
Max Drilling depth :- 100 Mt (~300 Ft)
(Under favorable drilling conditions)
MODEL: KLR-1000/1500/2000
Drill hole size: 6.5” - 12.0” Direct & 14” (O.B)
Max Drilling Depth - 600 Mtr (~2000 Ft)
Advisable Drill rod size: 4.5”
Mounting:-Truck / Skid
(Under favorable drilling conditions)
MODEL: DR-1000/1500/2000
Drill hole size: 8.5” Direct
16” (Reaming )
Max Depth :- 600 Mtr (~2000 Ft)
Mounting:-Truck
(Under favorable drilling Conditions)
MODEL: DTHR-300/450/600
Drill hole size: 6.5” - 10.0” (In case of DTH ) & 14” ( In case of Rotary )
Max Depth :- 600 Mtr (~2000 Ft)
Advisable Drill rod sizes:-3.5” & 4.5” Drill Rod.
Mounting:-Truck / Skid
(Under favorable drilling conditions)
KLR Products
CORE cum DTH cumROTARY DRILL RIG
ECONOMY PACK RIG
DTH DRILL RIG
DTH / ROTARY DRILL RIG
(Under Favorable Drilling Conditions)
CDR-700
NQ/NW-700m
HQ/HW-350m
DTH- 4.5”- 6.5”
DTH Depth 150 Mtr
Rotary 6.5”
Rotary Depth 300 M.
Mounting- Truck
CDR-400
NQ/HQ-400m
HQ/HW-250m
DTH- 4.5”- 6.5”
DTH Depth 150 Mtr
Rotary - 6.5”
Rotary Depth 200Mtr.
Mounting- Truck
CDR-1000
BQ /1275m / HQ 675m
NQ1000m/PQ-500m
DTH- 6.5”- 8.5”
DTH Depth 250 Mtr
Rotary 8.5”
Rotary Depth 500 Mtr.
Mounting- Truck
CDR-1500
NQ -1500 Mt
HQ-700 Mt
PQ-500 Mt
DTH 8.5” max
Depth - 900Mt1Rotary: 12 /4” max
Depth:- 1000 Mt
Mounting:- Truck
KLR INDUSTRIES LIMITED An ISO 9001- 2000 Company
For DTH Drilling suitable compressor on support vehicle
For DTH Drilling suitable compressor on support vehicle
DIRECT ROTARY DRILL RIG
KLR Products
MODEL : KWD-100 Drive -Hydraulic & PneumaticDrill hole size: 3.0”-4.5”Max. Depth: 36 Mtrs. (118 Feets)Mounting:- Self Propelled Type.( Under favorable Drilling Conditions )
MODEL: In-Well DrillingDrive- Hydraulic & PneumaticDrill hole size: 4.5”Max. Depth: 100 Mt.(~330 Ft )Mounting:- Dismantled Type, Tri Pod.( Under favorable Drilling Conditions )
Model: TMR-40Drilling Capacity 4.5’’ - 150 Mtrs. 6’’ - 50 Mtrs.Mounting:- Two Wheel Single Axle ( Dummy ) Trailer.( Under favorable Drilling Conditions )
Model:TBW-40/TC-40Drilling Capacity 4.5’’ - 150 Mtrs. 6’’ - 50 Mtrs.Mounting:- Suitable Tractor.(Under favorable Drilling Conditions )
KLRHand pump
Model: ITD46Capable of Angle drilling,Boom swing 40*, L&RDrilling Capacity 4.5’’ - 150 Mtrs. 6’’ - 50 Mtrs.Max.Hole Spacing- 5 Mt (L&R)( Under favorable Drilling Conditions )
WAGON DRILL RIG
INWELL DRILL RIG
TRAILER MOUNTED DRILL RIG
TRACTOR MOUNTED HYDRAULIC RIG
Model: CDR-50/CDR-150 DTH DRILL CAPACITY 4.5’’ - 150 Mtrs. 6’’ - 50 Mtrs.Mounting:- Skid / Truck( Under favorable Drilling Conditions ) Core - NQ / NW150 - HQ / HW 50 Mtrs.
CRAWLER MOUNTEDBLAST HOLE DRILL RIG
SELF PROPELLED SKIDMOUNTED RIG (CORE CUM DTH)
DEEP WELL HAND PUMP
S No. Type Depth Discharge per Minute
1 INDIAN MARK II 20-40 Mtr. 15 Ltr.2 MARK III (V.L.O.M 65 ) 20-30 Mtr. 15 Ltr.3 MARK III (V.L.O.M 50 ) 20-50 Mt. 10 Ltr.4 Ex.D.W Mark IV 40-90 Mtr. 12 Ltr.5 AFRIDEV 20-45 Mtr. 20 Ltr.
An ISO 9001- 2000 Company
DTH HAMMERS
VALVE TYPE
17 /4Size Range :- 2 /8”-17 ” according to IADC 1-1-1 to IADC 7-3-2
Max Dig Depth - 4.2 mExcavator Capacity - 0.24 Cu.mLoader Capacity - 1.0 Cu.m
VALVE LESS TYPE
CLUSTERHAMMER (HIPPO)
DTH BITS
U-DEX SET
POLE ERECTION M/C
DTH- Auger : Q24.0” - 6 Ft
Q12.0” - 10 Ft Q - 12 Ft 8.0”
KLR (VERSATILE 400)
( In view of continuos R&D and product improvement programme all specifications, features etc., Are subject to amendments without prior notice )
ROCK ROLLER BITS
VALVE TYPEMODEL : CHEETAH / PANTHER/ D-16/D17SUITABLE BIT SIZES : 3’’ TO 13”OUT SIDE DIAMETER : 62.0 mm TO 173.0 mmEFFECTIVE LENGTH : 1070.0 mm TO 1406 mmAIR CONSUMPTION : 100 TO 350 PSI
80 TO 865 CFM1
VALVE LESSMODEL TIGER / DIGGER/GLADIATOR:SUITABLE BIT SIZES : 3.5’’ TO 17”OUT SIDE DIAMETER : 78.0 mm TO 406.0 mmEFFECTIVE LENGTH : 850.0 mm TO 1406 mmAIR CONSUMPTION : 100 TO 350 PSI 180 TO 2650 CFM
CLUSTER HAMMERMODEL : HIPPOSUITABLE BIT SIZES : 17’’ TO 48”OUT SIDE DIAMETER : 406.0 mm TO 1180.0 mmEFFECTIVE LENGTH : 1405.0 mm TO 1850.0 mmAIR CONSUMPTION 200 TO 250 PSI:
1300 TO 7700 CFM
BITSMODEL : KLR / INGERSOLL RAND / SANDVIK ATLAS COPCO / NUMA / MISSIONSUITABLE BIT SIZES 3’’ TO 17”:OUT SIDE DIAMETER : 76.0 mm TO 420.0 mmSHANK LENGTH 165.0 mm TO 530.0 mm:NO.OF SPLINES : 6 Nos. TO 12 Nos. U-DEX BITSMODEL : KLR CASING SIZE PRODUCT RANGE : 68.0 mm 73.0 mm ( 2.875” ) : 115.0 mm 141.3 mm ( 5.56” ) : 140.0 mm 168.3 mm ( 6.625” ) : 190.0 mm 219.0 mm ( 8.625” )
SHANK LENGTH : 165.0 mm TO 400.0 mmNO OF SPLINES : 6 Nos. TO 12 Nos.
TRACK RECORD
SWEDEN
TURKEY
SUDAN
NIGERIA
GHANA
UGANDA
TANZANIA
ZAMBIA
SOUTH AFRICA
MAURITUS
NEPAL
KOREA
BANGLADESH
SRILANKA
KENYA
LEBANON
ETHIOPIA
CANADA
USA
SYRIAQATAR
UAEOMAN
KUWAT
CONGO
BURKINOFASA
KLR’s inherent confidence has its roots in its success story in Mother INDIA, Drilling with ease in varying terrains of this vast country be it the Desert lands of Rajasthan, Rocky terrains of Southern India, lofty terraces of Himalayan region, Alluvial lands of Gangetic planes - bringing succor to millions of rural population, farmers etc suffering from cyclic droughts, poor irrigation, lack of potable water etc.,
Emboldened by this experience KLR ventured out early in to distant EXPORT markets, particularly the developing world desperately in need of providing basics of living to their impoverished masses. No wonder, KLR’s Drilling equipments gained instant acceptance- by virtue of “STATE-OF-THE-ART APPROPRIATE TECHNOLOGY” and incredibly low Investment & Operational costs. KLR’s Customer Services rendered usage and full utilization of the machines.
TODAY KLR DRILL RIGS ARE PERFORMING SATISFACTORILY AND CAN CLAIM TO BE THE CUSTOMER’S FIRST CHOICE IN THE FOLLOWING COUNTRIES-
KENYA, UGANDA, TANZANIA, ZAMBIA, NIGERIA, SUDAN, MAURITIUS, ETHIOPIA, GHANA, LEBANON, MALAWI, SENEGAL, BURKINOFASA, TURKEY, QATAR DUBAI, SRILANKA, BANGLADESH, NEPAL, NEWZELAND, SOUTH KOREA, USA, CANADA, and SWEDEN.
In over 5 countries KLR have established Joint Ventures to provide Drilling Services and also established wide marketing network. Few projects for local manufacture of Drilling equipments, Tools etc are also in the planning stage .
An ISO 9001- 2000 Company
H.O & Factory :Survey No. 222/1, Cherlapally Road, ECIL Post, Hyderabad - 500 062. A.P., India.Ph.: 0091 - 40- 27123508, 27126833, 27121828, Fax : 040 - 27120558.
website : www.klrindustries.com : www.klruniversal.com : www.klr.in
Email : [email protected] : [email protected]: [email protected]
Mast with Mud Pump Compressor Supports Vehicle
Mobile Workshop