Launch Creader Product Registration and Upgrade Process

Please note:The upgrade requires Windows XP, 7, 8 (enterprise version), or Windows 10 (enterprise version).

1. Go to this link as below and choose the right version (here just take Version 8001 for example) to download the updating tool and install it on your computer.http://www.dbscar.com/pad/landingPageIndexcreaderOnline.action

2. When you download and install it successfully, launch it, enter "Product Serial Number" which you can find at the back side of the device, and then click "Device Upgrade"

3. Enter your email address and “Register Code” and click “Submit”.

The “Register Code” can be found in your tool. In the “Help” -> ”Tool Information” when the device powered on.

4. Connect your device to your computer via USB cable, or install the TF card from the tool into the TF card adapter and insert into the USB port of the computer.

5. Select the software you want to download and click “Download” to start downloading.

6. Once all steps are complete, restart your scan tool, or reinsert the TF card into your tool and then power on the tool.A dialog box (Note: If only diagnostic software is updated and no firmware package is downloaded, this box will not appear) prompting you to update will pop up on the screen, select [OK].

7. The registration process is complete, your tool is now ready for use.