Clause Parametrs Requirements

1 Dimensions, nominal (mm.) Inside Dia Thickness Outside

Dia.

1.A HDPE 5BO, Type 1 90 ±2 2.5 ±0.5 110 ±2

1.B Sub-ducts for Type 1 28 ±1 2.5 ±0.5 33 ±1

1.C HDPE 3DO, Type 2 90 ±2 2.5 ±0.5 110 ±2

1.D Sub-ducts for Type 2 36 ±1 2.8 ±0.5 42 ±1

1.E HDPE EO, Type 3 (Empty) 90 ±2 2.5 ±0.5 110 ±2

1.F HDPE 3CO, Type 4 58 ±2 2.5 ±0.5 77 ±2

1.G Sub-ducts for Type 4 22.2 ±1 2.5 ±0.5 27.2 ±1

2 Main duct wall design

Inner and outer walls shall be corrugat-ed with average pitch demension of

25.4±1mm. The corrugationshall either be helical or annular (ring)

3 Sub-duct wall design Outer and inner walls shall be plain and smooth

4 Fusion of main duct and Sub-duct

All contact surfaces between main duct and built-in sub-ducts shall fuse togeth-er during extrusion process. This fusion shall prevent movement or twisting of

subducts inside the main HDPE DUCT in finished products.

5Color of main HDPE duct Orange

Color of Sub-dcut According to customer requirement

AMS HDPE CORRUGATED DUCT AND SUB-DUCTTECHNICAL SHDPEIFICATION

DUCT SIZES AND DIMENSIONS

AMS HDPE & SUB-DUCT Pipes AMS HDPE & SUB-DUCT PipesAMS HDPE & SUB-DUCT Pipes AMS HDPE & SUB-DUCT Pipes

Type Model DesignConfiguration Description Application

1 HDPE-5BO HDPE-CD, 110mm OD, with5-33mm OD Sub-ducts

FOC installations

2 HDPE-3DO HDPE-CD, 110mm OD, with3-42mm OD Sub-ducts FOC installations

3 HDPE-EO HDPE-CD, 110mm OD,Without Sub-ducts

Copper Cableinstallations

4 HDPE-3CO HDPE-CD, 77mm OD, with3-27.2mm OD Sub-ducts FOC installations

General:HDPE Duct with built-in 5 sub-ducts for use in underground duct system Fiber Optical and Copper Cables.

PE 80 Pressure pipes according to DIN 8074 / 8075NominalOutside

Diametermm

SDR 33, S 16PN 3.1

SDR 26, S 12.5PN 4

SDR 17.6, S 8.3PN 6

SDR 11, S 5PN 10

SDR 9, S 4PN 12.5

SDR 7.4, S 3.2PN 15.3

WallThick-nessmm

WeightKg/

Meter

WallThick-nessmm

WeightKg/

Meter

WallThick-nessmm

WeightKg/

Meter

WallThick-nessmm

WeightKg/

Meter

WallThick-nessmm

WeightKg/

Meter

WallThick-nessmm

WeightKg/

Meter

16 - - - - - - - - 1.8 0.084 2.2 0.099

20 - - - - - - 1.9 0.112 2.3 0.133 2.8 0.154

25 - - - - - - 2.3 0.171 2.8 0.200 3.5 0.240

32 - - - - 1.8 0.179 2.9 0.272 3.6 0.327 4.4 0.386

40 - - 1.8 0.227 2.3 0.285 3.7 0.430 4.5 0.509 5.5 0.600

50 1.8 0.287 2.0 0.314 2.9 0.440 4.6 0.666 5.6 0.788 6.9 0.936

63 2.0 0.399 2.5 0.494 3.6 0.688 5.8 1.05 7.1 1.26 8.6 1.47

75 2.3 0.551 2.9 0.675 4.3 0.966 6.8 1.47 8.4 1.76 10.3 2.09

90 2.8 0.791 3.5 0.978 5.1 1.39 8.2 2.12 10.1 2.54 12.3 3.0

110 3.4 1.17 4.2 1.43 6.3 2.08 10.0 3.14 12.3 3.78 15.1 4.49

125 3.9 1.51 4.8 1.84 7.1 2.66 11.4 4.08 14.0 4.87 17.1 5.77

140 4.3 1.88 5.5 2.32 8.0 3.34 12.7 5.08 15.7 6.11 19.2 7.25

160 4.9 2.42 6.2 3.04 9.1 4.35 14.6 6.67 17.9 7.96 21.9 9.44

180 5.5 3.07 6.9 3.79 10.2 5.48 16.4 8.42 20.1 10.1 24.6 11.9

200 6.2 3.84 7.7 4.69 11.4 6.79 18.2 10.4 22.4 12.4 27.4 14.8

225 6.9 4.77 8.6 5.89 12.8 8.55 20.5 13.1 25.2 15.8 30.8 18.6

250 7.7 5.92 9.6 7.30 14.2 10.6 22.7 16.2 27.9 19.4 34.2 23.0

280 8.6 7.40 10.7 9.10 15.9 13.2 25.4 20.3 31.3 24.3 38.3 28.9

315 9.7 9.37 12.1 11.6 17.9 16.7 28.6 25.6 35.2 30.8 43.1 36.5

PE 100 Pressure pipes according to DIN 8074 / 8075NominalOutside

Diametermm

SDR 41, S 20PN 4

SDR 26, S 12.5PN 6.3

SDR 17, S 8PN 10

SDR 13.6, S 6.3PN 12.5

SDR 11, S 5PN 16

SDR 9, S 4PN 20

WallThick-nessmm

WeightKg/

Meter

WallThick-nessmm

WeightKg/

Meter

WallThick-nessmm

WeightKg/

Meter

WallThick-nessmm

WeightKg/

Meter

WallThick-nessmm

WeightKg/

Meter

WallThick-nessmm

WeightKg/

Meter

16 - - - - - - - - - - 1.8 0.084

20 - - - - - - 1.8 0.107 1.9 0.112 2.3 0.133

25 - - - - 1.8 0.137 1.9 0.144 2.3 0.171 2.8 0.200

32 - - - - 1.9 0.187 2.4 0.232 2.9 0.272 3.6 0.327

40 - - 1.8 0.227 2.4 0.295 3.0 0.356 3.7 0.430 4.5 0.509

50 - - 2.0 0.314 3.0 0.453 3.7 0.549 4.6 0.666 5.6 0.788

63 1.8 0.364 2.5 0.494 3.8 0.721 4.7 0.873 5.8 1.05 7.1 1.26

75 1.9 0.457 2.9 0.675 4.5 1.02 5.6 1.24 6.8 1.47 8.4 1.76

90 2.2 0.643 3.5 0.978 5.4 1.46 6.7 1.77 8.2 2.12 10.1 2.54

110 2.7 0.943 4.2 1.43 6.6 2.17 8.1 2.62 10.0 3.14 12.3 3.78

125 3.1 1.23 4.8 1.84 7.4 2.76 9.2 3.37 11.4 4.08 14.0 4.87

140 3.5 1.54 5.4 2.32 8.3 3.46 10.3 4.22 12.7 5.08 15.7 6.11

160 4.0 2.0 6.2 3.04 9.5 4.52 11.8 5.50 14.6 6.67 17.9 7.96

180 4.4 2.49 6.9 3.79 10.7 5.71 13.3 6.98 16.4 8.42 20.1 10.1

200 4.9 3.05 7.7 4.69 11.9 7.05 14.7 8.56 18.2 10.4 22.4 12.4

225 5.5 3.86 8.6 5.89 13.4 8.93 16.6 10.9 20.5 13.1 25.2 15.8

250 6.2 4.83 9.6 7.30 14.8 11.0 18.4 13.4 22.7 16.2 27.9 19.4

280 6.9 5.98 10.7 9.10 16.6 13.7 20.6 16.8 25.4 20.3 31.3 24.3

315 7.7 7.52 12.1 11.6 18.7 17.4 23.2 21.2 28.6 25.6 35.2 30.8

AMS HDPE Pipes AMS HDPE PipesAMS HDPE Pipes HIGH DENSITY POLYTHYLENE P.E 100

PE 100 Pressure pipes according to DIN 8074 / 8075PE 80 Pressure pipes according to DIN 8074 / 8075

Dimension for PE 100Dimension for PE 80

PE 100 Physical Characteristics at 20 c˚Properties Test Method Units Typical Value

Density ASTM D 1505 g/cm 3 0.96Tensile Strength @ Yield Point ASTM D 638 kg./cm2 230 @ Break Point ASTM D 638 kg./cm2 350Melt Index (190C/5 kg.) ASTM D 1238 g/10min 0.21Elongation @ Break Point ASTM D 638 % > 600Vicat Softening Point ASTM D 1525 C 122Flexural Modulus ASTM D 747 kg./cm2 8500Izod Impact Strength ASTM D 256 kg-cm/cm 20Carbon Black Content ISO 6964 % 2Brittleness Temperature ASTM D 746 C <-75Pipe Sress Rupture 12.4 Mpa ISO 1167 Hrs. >100

AMS Plastic manufactures high density polyethyleneaccording to Din 8074 & ISO 4427 standard in different

various pressure ratings according to

pipes (H.D.P.E) size range from 16mm to 315mmpressure ratings sHDPEific sizes are also produced incustomer requirements.

A.M.S FACTORY FOR

POLYETHELENE

manufactures H.D.P.E. pipes

in P.E.80 and P.E.100 for the

telecommunication industry.

Strict quality control

measures are adopted

keeping into consideration

design parameters. Latest

co-extrusion technology is

used to produce bi-colour co-

extruded pipes.