USEFor use with 105mm tank guns - US M68, UK L7 and French CN105F1, to provide blast and fragmentation effect against equipment, structuresand personnel.

DESCRIPTIONThe steel bodied projectile, loaded with a 2.0 kg high explosive charge, is fitted with a gilding metal driving band and a Point Detonating impactfuze. The projectile is assembled to a brass or steel cartridge case,which is fitted with an electric primer and loaded with a cool burning,single base, multi-perforated propellant. The fuze has two independentin-bore safeties and complies with MIL-STD-1316.

105mmTANK AMMUNITION105mm Tk. HE M1010

USEFor use with 105mm tank guns - US M68, UK L7 and French CN105F1, toprovide cost effective marksmanship and live fire training of gun crews.

DESCRIPTIONThe projectile consists of a sub-projectile and sabot. The sub-projectilecomprises a Fin Stabilized steel rod and a tracer assembled in the finassembly. The sub-projectile is contained in a 3-piece aluminiumDiscarding Sabot, held in place with a plastic band at the forward endand a plastic obturating band at the rear end of the sabot. The projectileis crimped to the cartridge case, which is loaded with cool burning,multi-perforated, loose propellant, and is fitted with an electric primerand a wear reducing liner. This round is similar, in appearance and ballistic performance, to the MECAR 105mm APFSDS-T M1060 round aswell as most other existing APFSDS-T rounds, up to a range of 2.5 Kms.

105mmTANK AMMUNITION105mm Tk TPFSDS-T M1056

USEFor use with 105mm tank guns - US M68, UK L7 and French CN105F1, toprovide cost effective marksmanship and live fire training of gun crews.

DESCRIPTIONThe projectile consists of a sub-projectile and sabot. The sub-projectile comprises a Cone Stabilized steel rod and a tracerassembled in the cone tail. The sub-projectile is contained in a 3-piecealuminium Discarding Sabot, held in place with a plastic band at the for-ward end and a plastic obturating band at the rear end of the sabot. The projectile is crimped to the cartridge case, which is loaded with coolburning, multi-perforated, loose propellant, and is fitted with an electricprimer and a wear reducing liner. This round is similar, in appearanceand ballistic performance, to the MECAR 105mm APFSDS-T M1060round as well as most other existing APFSDS-T rounds, up to a range of2.5 kms.

The Cone Tail design ensures that the maximum range of the projectileis less than 10 kms.

105mmTANK AMMUNITION105mm Tk TPCSDS-T M1057

USEFor use with 105mm tank guns - US M68, UK L7 and French CN105F1, to defeat armoured targets by means of the kinetic energy (KE) of its monobloc tungsten alloy long rod penetrator. This model of KE round is a major product improvement of the MECAR 105 mm APFSDS-T M1060A2.

DESCRIPTIONThe projectile consists of a sub-projectile and sabot. The sub-projectile comprises an Armour Piercing Fin Stabilized tungsten alloy long rod penetrator, an aluminium windshield and a tracer assembled in the fin assembly. This is contained within a 3-piece aluminium Discarding Sabot, held in place with a plastic band at the forward end and a plastic obturating band at the rear end of the sabot. The projectile is crimped to the cartridge case which is loaded with cool burning, multi-perforated, loose propellant, and is fitted with an electric primer and a wear reducing liner.

105mmTANK AMMUNITION105mm M1060A3 APFSDS-T