ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL /...

44
1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity 2500 Ampere. hour / kg Zinc Composition: Specification Code US Mil Spec 118001 K Cu 0.05% max Al 0.010 0.50% Fe 0.05% max Cd 0.025 0.07% Pb 0.006% max Others (total) 0.10% max Zn Remainder Electro Chemical: Potential Ag/AgCI -1.05 +/- 0.05V Capacity 780 Ampere. Hour / kg min. Specification Code A Guard Fe 0.09% Si 0.08 0.120% Cu 0.003% Zn 4.5 5.5% In 0.015 0.020% Others (each) 0.02% max Alluminium Remainder

Transcript of ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL /...

Page 1: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

1

ALUMINIUM AND ZINC ANODES

AL / ZN / IN Composistion:

Electro Chemichal:

Potential Ag/AgCI -1.05 Volts

Min Capacity 2500 Ampere. hour / kg

Zinc Composition:

Specification Code US Mil Spec 118001 K

Cu 0.05% max

Al 0.010 – 0.50%

Fe 0.05% max

Cd 0.025 – 0.07%

Pb 0.006% max

Others (total) 0.10% max

Zn Remainder

Electro Chemical:

Potential Ag/AgCI -1.05 +/- 0.05V

Capacity 780 Ampere. Hour / kg min.

Specification Code A Guard

Fe 0.09%

Si 0.08 – 0.120%

Cu 0.003%

Zn 4.5 – 5.5%

In 0.015 – 0.020%

Others (each) 0.02% max

Alluminium Remainder

Page 2: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

2

Product

Code

Ned Marine

Aluminium Weld-on Hull

Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

AGW2

0.35/

0.45

108

76

22

160

-

-

25x3

165

AGW5

0.7/

0.8

160

88

44

240

-

-

25x3

245

AGW5R

0.7/

0.8

160

88

50

240

-

-

25x3

245

AGW7R

1.1/

1.25

170

83

41

245

-

-

25x3

250

AGW10

1.75/

2

305

80

44

380

-

-

25x3

385

AGW10R

1.75/

2

305

78

44

380

-

-

25x3

385

AGW12

2.25/

2.5

305

114

25

380

-

-

25x3

385

AGW13

2.5/

2.75

230

152

32

295

-

-

25x3

300

Page 3: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

3

Product

Code

Ned Marine

Aluminium Weld-on Hull

Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

AGW15

3/

3.5

297

152

32

400

-

-

40x5

405

AGW20

4/

4.5

350

152

38

460

-

-

40x5

465

AGW22

4.45/

5.2

355

152

38

460

-

-

40x5

465

AGW30

5.6/

6.5

457

120

70

580

-

-

40x5

585

AGW30R

5/6

450

115

60

580

-

-

40x5

585

AGW30RS

5.6/

6.5

457

120

70

570

-

-

40x5

575

AGW36R

6/7

457

120

80

570

-

-

40x5

575

A8

7/8

550

130

50

700

-

-

40x5

705

Page 4: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

4

Product

Code

Ned Marine

Aluminium Weld-on Hull

Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

A11

10/

11

550

130

65

700

-

-

40x5

705

AGW35

7.5/

9

813

102

38

913

-

-

40x5

918

AGW45

10.5/

11.5

813

102

50

913

-

-

40x5

918

AGWS50

19/

20.5

990

90

80

1120

-

-

40x5

1125

AGW21

9/10

305

100

40

-

-

-

40x5

250

AGW24

3.5/

4

300

150

25

300

-

-

40x5

250

AGW25

4/

4.5

305

152

32

-

-

-

40x5

250

AGW42

7.5/

8

711

102

38

711

-

-

40x5

210

Page 5: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

5

Product

Code

Ned Marine

Zinc Weld-on Hull

Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

ZGW2

0.9/1

108

76

22

160

-

-

25x3

Galv

165

ZGW5

2/2.2

160

88

44

240

-

-

25x3

Galv

245

ZGW5R

2/2.1

160

88

50

240

-

-

25x3

Galv

245

ZGW7R

2.8/3

170

83

41

245

-

-

25x3

Galv

250

ZGW10

4.25/

4.5

305

80

44

380

-

-

25x3

Galv

385

ZGW10R

4.25/

4.5

305

78

44

380

-

-

25x3

Galv

385

ZGW12

5.25/

5.5

305

114

25

380

-

-

25x3

Galv

385

ZGW13

5.8/6

230

152

32

295

-

-

25x3

Galv

300

Page 6: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

6

Product

Code

Ned Marine

Zinc Weld-on Hull

Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

ZGW15

7.3/8

297

152

32

400

-

-

40x5

405

ZGW20

9.4/

10

350

152

38

460

-

-

40x5

465

ZGW22

11.25/

12

355

152

38

460

-

-

40x5

465

ZGW30

14.5/

15.5

457

120

70

580

-

-

40x5

585

ZGW30R

13/14

450

115

60

580

-

-

40x5

585

ZGW30RS

14/15

457

120

70

570

-

-

40x5

575

ZGW36R

15.45/

16.4

457

120

80

570

-

-

40x5

575

Z20

19/20

550

130

50

700

-

-

40x5

705

Page 7: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

7

Product

Code

Ned Marine

Zinc Weld-on Hull

Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

Z25

24/

25.1

550

130

55

700

-

-

40x5

705

ZGW35

18/20

813

102

38

913

-

-

40x5

918

ZGW45

25/27

813

102

50

913

-

-

40x5

918

ZGWS50

48/50

990

90

80

1120

-

-

40x5

1125

ZGW21

9/10

305

100

40

-

-

-

40x5

250

ZGW24

6/7

300

150

25

300

-

-

40x5

250

ZGW25

10/11

305

152

32

-

-

-

40x5

250

ZGW42

19/20

711

102

38

711

-

-

40x5

210

Page 8: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

8

Product

Code

Ned Marine

Aluminium Hull Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

MA5

0.4/

0.45

140

70

20

180

-

-

20x3

180

MA15

1.3/

1.5

150

100

38

250

-

-

20x3

250

MA25

2.1/

2.5

305

102

40

365

-

-

20x3

365

MA50

4.3/

5

445

125

40

505

-

-

40x5

505

MA80

7/8

640

125

43

700

-

-

40x5

700

MA116

10/

11.6

800

125

50

880

-

-

40x5

880

MA155

14/

15.5

920

125

50

-

-

-

40x5

1020

MA210

20/

21

650

110

105

-

-

-

40x5

750

Page 9: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

9

Product

Code

Ned Marine

Zinc Hull Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

MZ10

0.95/

1

140

70

20

180

-

-

20x3

180

MZ18

1.7/

1.8

160

80

30

205

-

-

20x3

205

MZ30

2.8/3

250

80

25

300

-

-

20x3

300

MZ51

4.6/

5.1

300

32

80

350

-

-

40x5

350

MZ85

8.1/

8.5

400

97

35

450

-

-

40x5

450

MZ108

10.2/

10.8

395

125

43

455

-

-

40x5

455

MZ160

15.1/

16

550

127

43

620

-

-

40x5

620

MZ220

20.6/

22

680

127

45

760

-

-

40x5

760

Page 10: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

10

Product

Code

Ned Marine

Zinc Hull Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

MZ270

27/

30.4

800

125

50

880

-

-

40x6

880

Page 11: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

11

Product

Code

Ned Marine

Magnesium Hull

Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

MGR2

0.25/

0.55

-

-

25

-

100

-

M12

0

MGR5

0.75/

1.65

-

-

25

-

138

-

40x5

100

MGW2

0.4/

0.5

108

76

22

-

-

-

25x3

0

MGS5R

0.5/

0.75

164

88

44

245

-

200

25x3

250

MGW7R

0.75/

0.95

185

83

41

245

-

-

25x3

250

MGW10R

1.1/

1.5

305

88

44

-

-

-

25x3

390

MGS10R

1.1/

1.3

305

88

44

-

-

200

30x3

255

MGW15

2/

2.75

305

152

32

-

-

-

40x5

405

Page 12: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

12

Product

Code

Ned Marine

Magnesium Hull

Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

MGW20

2.6/

3.5

355

152

32

-

-

-

40x5

460

MGS25R

11.5/

12

457

102

64

457

-

229

40x5

363

MGW30R

3.5/

4.5

457

120

70

-

-

-

40x5

580

Page 13: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

13

Product

Code

Ned Marine

Aluminium Stand Off

Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

M1480PA

148/

167

2375

160

160

2675

-

-

60mm

DIA

2675

M1760PA

175/

191

1735

200

200

2035

-

-

60mm

DIA

2035

M2400PA

240/

260

2365

200

200

2665

-

-

60mm

DIA

3225

M3300PA

330/

390

2375

250

250

2675

-

-

114mm

DIA

2675

M4350PA

435/

505

2985

250

250

3285

-

-

114mm

DIA

3285

M5650PA

565/

645

2975

283

283

3275

-

-

114mm

DIA

3275

M5660PA

566/

633

2440

305

305

2740

-

-

114mm

DIA

2740

Page 14: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

14

Product

Code

Ned Marine

Aluminium Tank Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

M25TA

2.5/

3.2

335

50

55

800

-

-

12mm

DIA

1225

M33TA

3.3/

4.4

305

63

70

800

-

-

12mm

DIA

1025

M45TA

4.5/

5.5

600

50

55

1100

-

-

12mm

DIA

2125

M58TA

5.8/

6.5

3.5

80

95

800

-

-

12mm

DIA

1100

M70TA

7.0/

8.0

600

63

70

1100

-

-

12mm

DIA

1250

M75TA

7.5/

9.0

1000

50

55

1500

-

-

12mm

DIA

1350

M87TA

8.7/

10

762

63

70

1225

-

-

12mm

DIA

1500

M100TA

10/

11

525

80

95

1025

12mm

DIA

1750

Page 15: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

15

Product

Code

Ned Marine

Aluminium Tank Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

M114TA

11.4/

13.3

1525

50

55

2125

-

-

12mm

DIA

2125

M121TA

12.1/

13.0

600

80

95

1100

-

-

12mm

DIA

1100

M150TA

15/1

6.1

750

80

95

1250

-

-

12mm

DIA

1250

M170TA

17/1

8.2

850

80

95

1350

-

-

12mm

DIA

1350

M200TA

20.0/

21.3

1000

80

95

1500

-

-

12mm

DIA

1500

M252TA

25.2/

26.7

1250

80

95

1750

-

-

12mm

DIA

1750

M309TA

30.9/

32.7

1525

80

95

2125

-

-

12mm

DIA

2125

M340TA

34/

36.4

1515

80

105

2115

16mm

DIA

2115

Page 16: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

16

Product

Code

Ned Marine

Aluminium Tank Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

M350TA

35/

39.5

1300

100

100

1800

-

-

20mm

DIA

1800

M445TA

44.5/

47.5

2000

80

105

2600

-

-

16mm

DIA

2600

M480TA

48/

54

1480

110

110

2080

-

-

25mm

DIA

2080

M570TA

57/

64

1750

110

110

2350

-

-

25mm

DIA

2350

M650TA

65/

74

2000

110

110

2600

-

-

25mm

DIA

2600

M700TA

70/

80

1555

130

130

2155

-

-

25mm

DIA

2155

M800TA

80/

90

1775

130

130

2375

-

-

25mm

DIA

2375

M900TA

90/

101

2000

130

130

2600

25mm

DIA

2600

Page 17: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

17

Product

Code

Ned Marine

Aluminium Tank Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

M1000TA

11/

110

220

130

130

2820

-

-

25mm

DIA

2820

M1100TA

110/

118.5

1595

160

160

2195

-

-

25mm

DIA

2195

M1200TA

120/

129

1740

160

160

2340

-

-

25mm

DIA

2340

M1265TA

126.5/

136.5

2000

117.5

200

2600

-

-

25mm

DIA

2600

M1300TA

130/

139.5

1885

160

160

2485

-

-

25mm

DIA

2485

M1350TA

135/

148

3000

130

130

3600

-

-

25mm

DIA

3600

M1400TA

140/

150

2030

160

160

2630

-

-

25mm

DIA

2630

M1500TA

150/

160

2000

160

160

2920

25mm

DIA

2920

Page 18: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

18

Product

Code

Ned Marine

Aluminium Tank Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

M1600TA

160/

171

2320

160

160

2920

-

-

25mm

DIA

2920

Page 19: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

19

Product

Code

Ned Marine

Zinc Tank Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

M52T

5.2/

6.0

300

50

50

800

-

-

12mm

DIA

800

M101T

10.0/

11.0

600

50

50

1100

-

-

12mm

DIA

1100

ZGRE13

13/

13.5

1525

35

35

-

-

-

12mm

DIA

1550

M150T

15.0/

16.5

900

50

50

1500

-

-

12mm

DIA

1500

M205T

20.5/

22.0

1225

50

50

1825

-

-

12mm

DIA

1825

ZGT22

22/

23.5

1525

55

50

1100

-

-

12mm

DIA

0

M265T

26.5/

27.5

500

80

95

1000

-

-

12mm

DIA

1000

M318T

31.8/

32.7

600

80

95

1100

-

-

12mm

DIA

1100

Page 20: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

20

Product

Code

Ned Marine

Zinc Tank Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

M400T

40/

41.2

750

80

95

1350

-

-

20mm

DIA

1350

M500T

50/

51.3

940

80

95

1540

-

-

20mm

DIA

1540

Page 21: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

21

Product

Code

Ned Marine

Aluminium Pit Guard

Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

M22TPA

2.2/

3.1

310

50

55

370

-

-

12mm

DIA

370

M32TPA

3.2/

4.2

430

50

55

500

-

-

12mm

DIA

500

M45TPA

4.5/

5.6

605

50

55

665

-

-

12mm

DIA

665

M55TPA

5.5/

6.4

275

80

95

335

-

-

12mm

DIA

335

M70TPA

7.0/

7.9

350

80

95

410

-

-

12mm

DIA

410

M90TPA

9.0/

10.0

450

80

95

510

-

-

12mm

DIA

510

Page 22: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

22

Product

Code

Ned Marine

Zinc Pit Guard

Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

M50TP

5.0/

5.9

290

50

50

350

-

-

12mm

DIA

350

M100TP

10/

11.1

580

50

50

640

-

-

12mm

DIA

640

M120TP

12/

13

395

63

70

455

-

-

12mm

DIA

455

M150TP

15/

15.9

280

80

95

340

-

-

12mm

DIA

340

M170TP

17/

17.9

315

80

95

375

-

-

12mm

DIA

375

M200TP

20/

21

370

80

95

430

-

-

12mm

DIA

430

Page 23: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

23

Product

Code

Ned Marine

Aluminium Disc Hull

Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

AGR2

0.35/

0.4

-

-

25

-

100

-

M12

0

AGR5

0.75/

0.8

-

-

35

-

138

-

40x5

100

AGR15

2.85/

3

-

-

25

-

225

-

M16

100

AGWL16

7.1/

8.5

-

-

30

-

345

-

40x5

500

Page 24: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

24

Product

Code

Ned Marine

Zinc Disc Hull

Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

ZGR250g

0.2/

0.25

-

-

20

-

65

-

M10

0

ZGR1

0.4/

0.5

-

-

25

-

70

-

M10

0

ZGR2

0.7/

0.8

-

-

25

-

95

-

M10

0

ZGR2S

0.9/1

-

-

25

-

100

-

M10

0

ZGR5

2.3/

2.5

-

-

35

-

138

-

M16

100

ZGR15

6.8/7

-

-

25

-

225

-

M16

100

ZGSR23

10.95/

11.15

-

-

50

-

230

-

M16

100

ZGWL16

18.4/

20

-

-

30

-

345

-

40x5

500

Page 25: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

25

Product

Code

Ned Marine

Zinc Strip Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

ZGST5

0.6/

0.65

125

44

15

-

-

75

25x3

OR

AL

TOP

HAT

100

ZGST6

0.5/

2.55

152

44

15

-

-

-

25x3

OR

AL

TOP

HAT

152

ZGST6D

0.5/

2.55

152

44

15

-

-

-

25x3

OR

AL

TOP

HAT

152

ZGST12

0.9/

1.1

305

44

15

-

-

-

25x3

OR

AL

TOP

HAT

305

ZGST12D

0.9/

1.1

305

44

15

-

-

-

25x3

OR

AL

TOP

HAT

305

ZGST15

1.1/

1.4

381

44

15

-

-

-

25x3

OR

AL

TOP

HAT

380

ZGST15D

1.1/

1.4

378

44

15

-

-

-

25x3

OR

AL

TOP

HAT

378

ZGST18

1.3/

1.65

457

44

15

-

-

-

25x3

OR

AL

TOP

HAT

457

Page 26: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

26

Product

Code

Ned Marine

Zinc Strip Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

ZGST24

1.8/

2.2

610

44

15

-

-

-

25x3

OR

AL

TOP

HAT

610

ZGST36

2.7/

3.3

915

44

15

-

-

-

25x3

OR

AL

TOP

HAT

-

ZGST39

2.9/

3.5

990

44

15

-

-

-

25x3

OR

AL

TOP

HAT

970

ZGCP4

0.5/

0.55

112

40

12

-

-

-

M16

-

Page 27: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

27

Product

Code

Ned Marine

Zinc ROD Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

ZR10

0.3/-

500

-

-

-

10

-

None

0

ZR12

0.4/-

500

-

-

-

12

-

None

0

ZR16

0.7/-

500

-

-

-

16

-

None

0

ZR20

1.25/-

500

-

-

-

20

-

None

0

ZR25

1.8/-

500

-

-

-

25

-

None

0

ZR30

2.5/-

500

-

-

-

30

-

None

0

ZR40

4.5/-

500

-

-

-

40

-

None

0

ZR50

7/-

500

-

-

-

50

-

None

0

Page 28: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

28

Product

Code

Ned Marine

Zinc ROD Anodes

Net

/Gro

sWei

gh

t (K

g)

A –

Len

gth

(m

m)

B –

Wid

th (

mm

)

C –

Hei

gh

t (m

m)

D –

Ov

era

ll L

eng

th (

mm

)

E –

Dia

met

er (

mm

)

F –

Fix

ing

Cen

tres

(m

m)

G –

In

sert

Siz

e (m

m)

H –

In

sert

Len

gth

(m

m)

ZR60

10/-

500

-

-

-

60

-

None

0

ZR70

13.7/-

500

-

-

-

70

-

None

0

ZR80

17.7/-

500

-

-

-

80

-

None

0

ZR90

22.7/-

500

-

-

-

80

-

None

0

ZR100

27.7/-

500

-

-

-

100

-

None

0

ZR200

45/-

250

-

-

-

200

-

None

0

ZR125

46.5/-

500

-

-

-

125

-

None

0

ZR150

66.5

500

-

-

-

150

-

None

0

Page 29: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

29

MATERIAL SAFETY: Aluminium Alloy

MSDS-001

Section 1: Product Information and Company Identification

Product Name: Aluminium Alloy

Synonym: Al/In/Zn

Chemical Name: None Allocated

Chemical Formula: None Allocated

Hazchem Code: None Allocated

Contact Information: NedMarine Services B.V.

Tinstraat 109

2984 AN Ridderkerk

The Netherlands

Tel: +31 (0) 180 420 055

Fax: +31 (0) 180 499 810

Email: [email protected]

Web: www.nedmarine.com

Section 2: Composition and Information on Elements

Alluminium

Alloy

Elements %

A-Guard®

G3

MIL-DTL-

24779A(SH)

DNV-RP-B401

ISO 15589-2

NORSOK M-503

Zinc 4.000%-5.000% 2.500%-0.500% 4.000%-6.500% 2.500%-5.750% 2.500%-5.750% 2.500%-5.750%

Indium 0.015%-0.020% 0.010%-0.020% 0.014%-0.020% 0.015%-0.040% 0.016%-0.040% 0.015%-0.040%

Silicon 0.080%-0.120% 0.080%-0.150% 0.080%-0.200% max. 0.120% max. 0.120% max.0.100%

Iron max. 0.090% max. 0.120% max. 0.090% max. 0.090% max. 0.90% max. 0.90%

Copper max. 0.003% max. 0.006% max. 0.004% max. 0.003% max. 0.003% max. 0.003%

Mercury - - max. 0.001% - - -

Tin - - max. 0.001% - - -

Cadmium - - - max. 0.002% max. 0.002% -

Others max. 0.100% max. 0.020% (ea.) max. 0.100% - max. 0.020% (ea.) max. 0.020% (ea.)

Aluminium Remainder Remainder Remainder Remainder Remainder Remainder

Section 3: Hazards Identification

Potential Acute Health Effects:

Slightly hazardous in case of skin contact (irritant). Non-irritating to the eyes. Non-hazardous in case of ingestion.

Potential Chronic Health Effects:

CARCINOGENIC EFFECTS: Not available.

MUTAGENIC EFFECTS: Not available.

TERATOGENIC EFFECTS: Not available.

DEVELOPMENTAL TOXICITY: Not available.

The substance is toxic to lungs.

Repeated or prolonged exposure to the substance can produce target organs damage. Repeated exposure to a highly toxic material may produce general

deterioration of health by an accumulation in one or many human organs.

Section 4: First Aid Measures

Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical

attention if irritation occurs.

Skin Contact: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops.

Serious Skin Contact: Not available.

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately.

Serious Inhalation: Not available.

Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities

of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar, tie, belt or waistband.

Serious Ingestion: Not available.

Revision No.: B

Issue Date: 25/08/2010

Pages: 1 of 3

Page 30: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

30

MATERIAL SAFETY: Aluminium Alloy

MSDS-001

Section 5: Fire and Explosion Data

Flammability of the Product: Non-flammable.

Auto-Ignition Temperature: Not available.

Flash Points: Not available.

Flammable Limits: Not available.

Products of Combustion: Some metallic oxides.

Fire Hazards in Presence of Various Substances: Not available.

Explosion Hazards in Presence of Various Substances: Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion

of the product in presence of static discharge: Not available.

Fire Fighting Media and Instructions: SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jet.

Special Remarks on Fire Hazards: Not available.

Special Remarks on Explosion Hazards: Not available.

Section 6: Accidental Release Measures

Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated

surface and dispose of according to local and regional authority requirements.

Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and

allow evacuating through the sanitary system.

Section 7: Handling and Storage

Precautions: Do not ingest. Wear suitable protective clothing. If ingested, seek medical advice immediately and show the container or the label. Keep away

from incompatibles such as oxidizing agents, acids, alkalis.

Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area. Moisture sensitive.

Section 8: Exposure Controls / Personal Protection

Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure

limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.

Personal Protection: Safety glasses. Lab coat. Gloves.

Personal Protection in Case of a Large Spill: Safety glasses. Lab coat. Gloves.

Exposure Limits: Consult local authorities for acceptable exposure limits.

Section 9: Physical and Chemical Properties

Physical state and appearance: Solid.

Odour: Odourless.

Taste: Not available.

Molecular Weight: 2700 - 2750 kg/m3

Colour: Silver-white

pH (1% soln/water): Not applicable.

Boiling Point: 2327°C (4220.6°F)

Melting Point: 660°C (1220°F)

Critical Temperature: Not available.

Specific Gravity: Density: 2.7 (Water = 1)

Vapour Pressure: Not applicable.

Vapour Density: Not available.

Volatility: Not available.

Odour Threshold: Not available.

Water/Oil Dist. Coeff.: Not available.

Ionicity (in Water): Not available.

Dispersion Properties: Not available.

Solubility: Insoluble in cold water, hot water. Soluble in alkalies, Sulphuric

acid, Hydrochloric acid. Insoluble in concentrated Nitric Acid, hot Acetic

acid.

Revision No.: B

Issue Date: 25/08/2010

Pages: 2 of 3

Page 31: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

31

MATERIAL SAFETY: Aluminium Alloy

MSDS-001

Section 10: Stability and Reactivity Data

Stability: The product is stable.

Instability Temperature: Not available.

Conditions of Instability: Incompatible materials, exposure to moist air or water.

Incompatibility with various substances: Reactive with oxidizing agents, acids, alkalis.

Corrosivity: Not available.

Special Remarks on Reactivity: Moisture sensitive. Aluminium reacts vigorously with Sodium Hydroxide. Aluminium is also incompatible with strong

oxidizers, acids, chromic anhydride, iodine, carbon disulfide, methyl chloride, and halogenated hydrocarbons, acid chlorides, ammonium nitrate, ammonium

persulfate, antimony, arsenic oxides, barium bromate, barium chlorate, barium iodate, metal salts.

Special Remarks on Corrosivity: In moist air, oxide film forms which protects metal from corrosion. Aluminium is strongly electropositive so that it corrodes

rapidly in contact with other metals.

Polymerization: Will not occur.

Section 11: Toxicological Information

Routes of Entry: Not available.

Toxicity to Animals: Not available

Chronic Effects on Humans: Not available.

Other Toxic Effects on Humans: Slightly hazardous in case of skin contact (irritant). Non-hazardous in case of ingestion. Non-hazardous in case of inhalation.

Special Remarks on Toxicity to Animals: Not available.

Special Remarks on Chronic Effects on Humans: Not available.

Special Remarks on other Toxic Effects on Humans: Acute Potential Health Effects:

Skin: Exposure to Aluminium may cause skin irritation.

Eyes: Not expected to be a hazard unless Aluminium dust particles are present. Exposure to Aluminium dust may cause eye irritation by mechanical action.

Aluminium particles deposited in the eye are generally innocuous. Inhalation: Not expected to be an inhalation hazard unless it is heated or if Aluminium dust is

present It heated or in dust form, it may cause respiratory tract irritation. Heating Aluminium can release Aluminium Oxide fumes and cause fume metal fever

when inhaled. This is a flu-like illness with symptoms of metallic taste, fever, chills, aches, chest tightness, and cough.

Ingestion: Acute Aluminium toxicity is unlikely.

Chronic Potential Health Effects:

Skin: Contact dermatitis occurs rarely after Aluminium exposure. Most cases of Aluminium toxicity in humans are in one of two categories: patients with

chronic renal failure, or people exposed to Aluminium fumes or dust in the workplace. The main source of Aluminium in people with chronic renal failure was

in the high Aluminium content of the water for the dialysate used for dialysis in the 1970's in America. Even though this problem was recognized and corrected,

Aluminium toxicity continues to occur in some individuals with renal who chronically ingest Aluminium-containing phosphate binders or antacids.

Inhalation: Chronic exposure to Aluminium dust may cause dyspnoea, cough, asthma, chronic obstructive lung disease, pulmonary fibrosis, pneumothorax,

pneumoconiosis, encephalopathy, weakness, in-coordination and epileptiform seizures and other neurological symptoms similar to that described for chronic

ingestion. Hepatic necrosis is also a reported effect of exposure to airborne particulates carrying Aluminium.

Ingestion: Chronic ingestion of Aluminium may cause Aluminium Related Bone Disease or Aluminium-induced Osteomalacia with fracturing Osteodystrophy,

microcytic anemia, weakness, fatigue, visual and auditory hallucinations, memory loss, speech and language impairment (dysarthria, stuttering, stammering,

anomia, hypofluency, aphasia and eventually, mutism), epileptic seizures(focal or grand mal), motor disturbance (tremors, myoclonic jerks, ataxia, convulsions,

asterixis, motor apraxia, muscle fatigue), and dementia (personality changes, altered mood, depression, diminished alertness, lethargy, 'clouding of the

sensorium', intellectual deterioration, obtundation, coma), and altered EEG.

Section 12: Ecological Information

Ecotoxicity: Not available.

BOD5 and COD: Not available.

Products of Biodegradation: Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.

Toxicity of the Products of Biodegradation: The products of degradation are less toxic than the product itself.

Special Remarks on the Products of Biodegradation: Not available.

Section 13: Disposal Considerations Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.

Section 14: Transport Information Transport: Aluminium is considered stable under normal handling conditions. Keep Aluminium metal clean and dry during transport.

DISCLAIMER The information above is believed to be accurate and represents the best information currently available to NedMarine Services B.V. However, NedMarine Services B.V. make no warranty of merchantability or any other warranty, express or implied, with respect to such

information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the

information for their particular purposes. In no event shall NedMarine Services B.V. be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if NedMarine

Services B.V. has been advised of the possibility of such damages.

Revision No.: B

Issue Date: 25/08/2010

Pages: 3 of 3

Page 32: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

32

MATERIAL SAFETY: Copper

MSDS-003

Section 1: Product Information and Company Identification

Product Name: Copper

Synonym: Copper Metal

Chemical Name: Copper

Chemical Formula: Cu

Hazchem Code: None Allocated

Contact Information: NedMarine Services B.V.

Tinstraat 109

2984 AN Ridderkerk

The Netherlands

Tel: +31 (0) 180 420 055

Fax: +31 (0) 180 499 810

Email: [email protected]

Web: www.nedmarine.com

Section 2: Composition and Information on Elements Copper: % by weight – 100%

Section 3: Hazards Identification

Potential Acute Health Effects: Very hazardous in case of ingestion. Hazardous in case of eye contact (irritant), of inhalation. Slightly

hazardous in case of skin contact (irritant).

Potential Chronic Health Effects:

CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available.

TERATOGENIC EFFECTS: Not available.

DEVELOPMENTAL TOXICITY: Not available.

The substance is toxic to lungs, mucous membranes.

Repeated or prolonged exposure to the substance can produce target organs damage.

Section 4: First Aid Measures

Eye Contact: Check for and remove any contact lenses. Do not use an eye ointment. Seek medical attention.

Skin Contact: After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with

running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cover the irritated skin with an

emollient. If irritation persists, seek medical attention. Wash contaminated clothing before reusing.

Serious Skin Contact: Not available.

Inhalation: Allow the victim to rest in a well ventilated area. Seek immediate medical attention.

Serious Inhalation: Not available. Ingestion: Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.

Serious Ingestion: Not available.

Section 5: Fire and Explosion Data

Flammability of the Product: May be combustible at high temperature.

Auto-Ignition Temperature: Not available.

Flash Points: Not available.

Flammable Limits: Not available.

Products of Combustion: Some metallic oxides.

Fire Hazards in Presence of Various Substances: Not available.

Explosion Hazards in Presence of Various Substances: Risks of explosion of the product in presence of mechanical impact: Not

available.

Fire Fighting Media and Instructions: SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not

use water jet.

Special Remarks on Explosion Hazards: Not available.

Revision No.: B

Issue Date: 25/08/2010

Pages: 1 of 3

Page 33: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

33

MATERIAL SAFETY: Copper

MSDS-003

Section 6: Accidental Release Measures

Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on

the contaminated surface and dispose of according to local and regional authority requirements.

Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the

contaminated surface and allow evacuating through the sanitary system. Be careful that the product is not present at a concentration level

above TLV. Check TLV on the MSDS and with local authorities.

Section 7: Handling and Storage

Precautions: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a

fume hood. Ground all equipment containing material. Do not breathe dust. Avoid contact with eyes Wear suitable protective clothing In

case of insufficient ventilation, wear suitable respiratory equipment If you feel unwell, seek medical attention and show the label when possible.

Storage: Keep container dry. Keep in a cool place. Ground all equipment containing material. Keep container tightly closed. Keep in a cool, well-ventilated place. Combustible materials should be stored away from extreme heat and away from strong oxidizing agents.

Section 8: Exposure Controls / Personal Protection

Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below

recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.

Personal Protection: Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.

Personal Protection in Case of a Large Spill: Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing

apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.

Exposure Limits: TWA: 1 (mg/m3) from ACGIH [1990]

Consult local authorities for acceptable exposure limits.

Section 9: Physical and Chemical Properties

Physical state and appearance: Solid.

Odour: Not available.

Taste: Not available.

Molecular Weight: 8960 kg/m3

Colour: Pinkish-red

pH (1% soln/water): Not applicable.

Boiling Point: 2595°C (4703°F)

Melting Point: 1083°C (1981.4°F)

Critical Temperature: Not available.

Specific Gravity: 8.94 (Water = 1)

Vapour Pressure: Not applicable.

Vapour Density: Not available.

Volatility: Not available.

Odour Threshold: Not available.

Water/Oil Dist. Coeff.: Not available.

Ionicity (in Water): Not available.

Dispersion Properties: Not available.

Solubility: Insoluble in cold water.

Section 10: Stability and Reactivity Data

Stability: The product is stable.

Instability Temperature: Not available.

Conditions of Instability: Not available.

Incompatibility with various substances: Not available.

Corrosivity: Non-corrosive in presence of glass.

Special Remarks on Reactivity: Not available.

Special Remarks on Corrosivity: Not available.

Polymerization: No.

Revision No.: B

Issue Date: 25/08/2010

Pages: 2 of 3

Page 34: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

34

MATERIAL SAFETY: Copper

MSDS-003

Section 11: Toxicological Information

Routes of Entry: Absorbed through skin. Eye contact. Inhalation. Ingestion.

Toxicity to Animals: Not available.

Chronic Effects on Humans: The substance is toxic to lungs, mucous membranes.

Other Toxic Effects on Humans: Very hazardous in case of ingestion. Hazardous in case of inhalation. Slightly hazardous in case of skin

contact (irritant).

Special Remarks on Toxicity to Animals: Not available.

Special Remarks on Chronic Effects on Humans: Passes through the placenta, excreted in maternal milk.

Special Remarks on other Toxic Effects on Humans: Not available. Section 12: Ecological Information

Ecotoxicity: Not available.

BOD5 and COD: Not available.

Products of Biodegradation: Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.

Toxicity of the Products of Biodegradation: The products of degradation are as toxic as the original product.

Special Remarks on the Products of Biodegradation: Not available. Section 13: Disposal Considerations

Waste Disposal: Section 14: Transport Information

Special Provisions for Transport: Marine Pollutant DISCLAIMER

The information above is believed to be accurate and represents the best information currently available to NedMarine Services B.V.

However, NedMarine Services B.V. make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the

information for their particular purposes. In no event shall NedMarine Services B.V. be liable for any claims, losses, or damages of any

third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if NedMarine Services B.V. has been advised of the possibility of such damages.

Revision No.: B

Issue Date: 25/08/2010

Pages: 3 of 3

Page 35: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

35

MATERIAL SAFETY: Zinc Alloy

MSDS-002

Section 1: Product Information and Company Identification

Product Name: Zinc Alloy

Synonym: Zn/Al

Chemical Name: None Allocated

Chemical Formula: None Allocated

Hazchem Code: None Allocated

Contact Information: NedMarine Services B.V.

Tinstraat 109

2984 AN Ridderkerk

The Netherlands

Tel: +31 (0) 180 420 055

Fax: +31 (0) 180 499 810

Email: [email protected]

Web: www.nedmarine.com

Section 2: Composition and Information on Elements Zinc Alloy

Elements %

MIL-A-18001K

ASTM B 418 Type II

ASTM B 418 Type I

Aluminium 0.100% - 0.500% max. 0.005% 0.100% - 0.500%

Cadmium 0.025% - 0.070% max. 0.003% 0.025% - 0.070%

Iron max. 0.005% max. 0.0014% max. 0.005%

Copper max. 0.005% max. 0.002% max. 0.005%

Lead max. 0.006% max. 0.003% max. 0.006%

Others max. 0.100% - max. 0.100%

Zinc min. 99.314% Remainder Remainder

Section 3: Hazards Identification

Potential Acute Health Effects: Slightly hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation.

Potential Chronic Health Effects:

CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available.

TERATOGENIC EFFECTS: Not available.

DEVELOPMENTAL TOXICITY: Not available.

Repeated or prolonged exposure is not known to aggravate medical condition.

Section 4: First Aid Measures

Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation occurs.

Skin Contact: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops.

Serious Skin Contact: Not available.

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical

attention.

Serious Inhalation: Not available.

Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar, tie, belt or

waistband.

Serious Ingestion: Not available.

Revision No.: B

Issue Date: 25/08/2010

Pages: 1 of 4

Page 36: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

36

MATERIAL SAFETY: Zinc Alloy

MSDS-002

Section 5: Fire and Explosion Data

Flammability of the Product: Flammable.

Auto-Ignition Temperature: 480°C (896°F)

Flash Points: Not available.

Flammable Limits: Not available.

Products of Combustion: Not available.

Fire Hazards in Presence of Various Substances: Slightly flammable to flammable in presence of open flames and sparks, of heat, of

oxidizing materials, of acids, of alkalis, of moisture. Non-flammable in presence of shocks.

Explosion Hazards in Presence of Various Substances: Risks of explosion of the product in presence of mechanical impact: Not

available. Risks of explosion of the product in presence of static discharge: Not available.

Fire Fighting Media and Instructions: Flammable solid. SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray or

fog. Cool containing vessels with water jet in order to prevent pressure build-up, auto-ignition or explosion.

Special Remarks on Fire Hazards: Zinc + NaOH causes ignition. Oxidation of zinc by potassium proceeds with incandescence. Residues

from zinc dust /acetic acid reduction operations may ignite after long delay if discarded into waste bins with paper. Incandescent reaction when Zinc and Arsenic or Tellurium, or Selenium are combined. When hydrazine mononitrate is heated in contact with zinc, a flaming

decomposition occurs at temperatures a little above its melting point.

Contact with acids and alkali hydroxides (sodium hydroxide, postasium hydroxide, calcium hydroxide, etc.) results in evolution of

hydrogen with sufficient heat of reaction to ignite the hydrogen gas.

Zinc foil ignites if traces of moisture are present.

It is water reactive and produces flammable gases on contact with water. It may ignite on contact with water or moist air.

Special Remarks on Explosion Hazards: Not available.

Section 6: Accidental Release Measures

Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.

Large Spill: Flammable solid that, in contact with water, emits flammable gases. Stop leak if without risk. Do not get water inside container. Do not touch spilled material. Cover with dry earth, sand or other non-combustible material. Prevent entry into sewers, basements

or confined areas; dike if needed. Eliminate all ignition sources. Call for assistance on disposal. Finish cleaning by spreading water on the contaminated surface and allow evacuating through the sanitary system.

Section 7: Handling and Storage

Precautions: Keep away from heat. Keep away from sources of ignition. Ground all equipment containing material. Do not breathe dust.

Keep away from incompatibles such as oxidizing agents, acids, alkalis, moisture.

Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area. Keep from any possible contact with water. Do not

allow water to get into container because of violent reaction.

Section 8: Exposure Controls / Personal Protection

Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants

below the exposure limit.

Personal Protection: Safety glasses. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.

Personal Protection in Case of a Large Spill: Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist

BEFORE handling this product.

Exposure Limits: Not available.

Revision No.: B

Issue Date: 25/08/2010

Pages: 2 of 4

Page 37: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

37

MATERIAL SAFETY: Zinc Alloy

MSDS-002

Section 9: Physical and Chemical Properties

Physical state and appearance: Solid. (Lustrous solid. Metal solid.)

Odour: Not available.

Taste: Not available.

Molecular Weight: 7103 kg/m3

Colour: Bluish-grey

pH (1% soln/water): Not applicable.

Boiling Point: 907°C (1664.6°F)

Melting Point: 419°C (786.2°F)

Critical Temperature: Not available.

Specific Gravity: Not available.

Vapour Pressure: Not applicable.

Vapour Density: Not available.

Volatility: Not available.

Odour Threshold: Not available.

Water/Oil Dist. Coeff.: Not available.

Ionicity (in Water): Not available.

Dispersion Properties: Not available.

Solubility: Insoluble in cold water, hot water, methanol, diethyl ether, n-octanol, acetone.

Section 10: Stability and Reactivity Data

Stability: The product is stable.

Instability Temperature: Not available.

Conditions of Instability: Excess heat, incompatible materials, moisture

Incompatibility with various substances: Reactive with oxidizing agents, acids, alkalis. Slightly reactive to reactive with moisture. The

product may react violently with water to emit flammable but non toxic gases.

Corrosivity: Non-corrosive in presence of glass.

Special Remarks on Reactivity: Incompatible with acids, halogenated hydrocarbons, NH4NO3, barium oxide, Ba(NO3)2, Cadmium, CS2,

chlorates, Cl2, CrO3, F2, Hydroxylamine, Pb(N3)2, MnCl2, HNO3, performic acid, KClO3, KNO3, N2O2, Selenium, NaClO3, Na2O2,

Sulfur, Te, water, (NH4)2S, As2O3, CS2, CaCl2, chlorinated rubber, catalytic metals, halocarbons, o-nitroanisole, nitrobenzene, non metals, oxidants, paint primer base, pentacarbonoyliron, transition metal halides, seleninyl bromide, HCl, H2SO4, (Mg +Ba(NO3)2

+BaO2), (ethyl acetoacetate +tribromoneopentyl alcohol. Contact with Alkali Hydroxides(Sodium Hydroxide, Potassium Hydroxide,

Calcium Hydroxide, etc) results in evolution of hydrogen. Ammonium nitrate + zinc + water causes a violent reaction with evolution of steam and zinc oxide. May react with water.

Special Remarks on Corrosivity: Not available.

Polymerization: Will not occur.

Revision No.: B

Issue Date: 25/08/2010

Pages: 3 of 4

Page 38: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

38

MATERIAL SAFETY: Zinc Alloy

MSDS-002

Section 11: Toxicological Information

Routes of Entry: Inhalation. Ingestion.

Toxicity to Animals: Not available. Chronic Effects on Humans: Not available.

Other Toxic Effects on Humans: Slightly hazardous in case of skin contact (irritant), of ingestion, of inhalation.

Special Remarks on Toxicity to Animals: Not available.

Special Remarks on Chronic Effects on Humans: Not available.

Special Remarks on other Toxic Effects on Humans: Acute Potential Health Effects:

Skin: May cause skin irritation. Dermal exposure to zinc may produce leg pains, fatigue, anorexia and weight loss.

Eyes: May cause eye irritation. Ingestion: May be harmful if swallowed. May cause digestive tract irritation with tightness in throat, nausea, vomiting, diarrheal, loss of

appetite, alaise, abdominal pain. fever, and chills. May affect behaviour/central nervous system and autonomic nervous system with ataxia,

lethargy, staggering gait, mild derangement in cerebellar function, light headiness, dizziness, irritability, muscular stiffness, and pain. May also affect blood.

Inhalation: Inhalation of zinc dust or fumes may cause respiratory tract and mucous membrane irritation with cough and chest pain. It can also cause "metal fume fever", a flu-like condition characterized appearance of chills, headache fever, maliase, fatigue, sweating, extreme

thirst, aches in the legs and chest, and difficulty in breathing. A sweet taste may also be present in metal fume fever, as well as a dry throat,

aches, nausea, and vomiting, and pale grey cyanosis.

The toxicological properties of this substance have not been fully investigated. Section 12: Ecological Information

Ecotoxicity: Not available.

BOD5 and COD: Not available.

Products of Biodegradation: Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.

Toxicity of the Products of Biodegradation: Not available.

Special Remarks on the Products of Biodegradation: Not available.

Section 13: Disposal Considerations Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.

Section 14: Transport Information Transport: Zinc is considered stable under normal handling conditions. Keep Zinc metal clean and dry during transport.

DISCLAIMER The information above is believed to be accurate and represents the best information currently available to NedMarine Services B.V.

However, NedMarine Services B.V. make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the

information for their particular purposes. In no event shall NedMarine Services B.V. be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if NedMarine

Services B.V. has been advised of the possibility of such damages.

Revision No.: B

Issue Date: 25/08/2010

Pages: 4 of 4

Page 39: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

39

MATERIAL SAFETY: Mild Steel

MSDS-004

Section 1: Product Information and Company Identification

Product Name: Mild Steel

Synonym: Carbon and Alloy Steel, AISI-SAE

Chemical Name: None Allocated

Chemical Formula: None Allocated

Hazchem Code: None Allocated

Contact Information: NedMarine Services B.V.

Tinstraat 109

2984 AN Ridderkerk

The Netherlands

Tel: +31 (0) 180 420 055

Fax: +31 (0) 180 499 810

Email: [email protected]

Web: www.nedmarine.com

Section 2: Composition and Information on Elements

Elements %

% by weight

Elements %

% by weight

Aluminium <0.01% - 0.50% Lead <0.15% - 0.35%

Bismuth <0.20% - 0.50% Manganese <0.04% - 0.70%

Boron <0.01% - 1.00% Molybdenum <0.15% - 1.10%

Carbon <0.10% - 1.50% Nickel <0.10% - 10.00%

Chromium <0.40% - 100% Phosphorous <0.04% - 0.12%

Columnium <0.15% - 0.35% Silicon <0.15% - 2.00%

Copper <0.30% - 1.90% Sulphur <0.05% - 0.35%

Iron <86.50% - 99.50% Vanadium <0.01% - 0.15%

The above is a summary of elements used in alloying steel. Various grades of steel will contain different combinations of these elements. Trace elements may

also be present in minute amounts.

Section 3: Hazards Identification

Potential Acute Health Effects: Excessive inhalation of metallic fumes and dust may result in irritation of eyes, nose and throat. High concentrations of fumes

and dust of iron-oxide, manganese, copper, zinc and lead may result in metal fume fever. Typical symptoms last from 12 to 48 hours and consist of a metallic

taste in the mouth, dryness and irritation of the throat, chills and fever.

Potential Chronic Health Effects: Chronic and prolonged inhalation of high concentrations of fumes or dust of the following elements may lead to the

conditions listed opposite the element.

Aluminium: May initiate fibrotic changes to lung tissue.

Bismuth: No chronic debilitating symptoms indicated.

Boron: No chronic debilitating symptoms indicated.

Chromium: Lesions of the skin and mucous membranes, possible cancer of

the nose or lungs-bronchogenic carcinoma

Copper: No chronic debilitating symptoms indicated.

Iron: Siderosis, pulmonary effects.

Lead: Anemia, urinary dysfunction, weakness, constipation, nausea, nervous

disorder.

Manganese: Bronchitis, pneumonitis, lack of coordination.

Molybdenum: Respiratory tract irritation, possible liver and kidney damage,

bone deformity.

Nickel: Lesions of the skin and mucous membranes, possible cancer of the

nose or lungs-bronchogenic carcinoma.

Phosphorous: Necrosis of the mandible.

Sulphur: (as Sulphur Dioxide) Edema of the lungs.

Vanadium: (as Vanadium Pentoxide) Emphysema, pneumonia.

Zinc: Gastrointestinal inflammation reported in animal studies.

Section 4: First Aid Measures

Eye Contact: Flush thoroughly with running water to remove particulate; obtain medical attention.

Skin Contact: Remove particles by washing thoroughly with soap and water. Seek medical attention if condition persists.

Serious Skin Contact: Not available.

Inhalation: If inhaled, remove to fresh air; if condition continues, consult a physician..

Serious Inhalation: Not available.

Ingestion: If significant amounts of metal are ingested, consult a physician.

Serious Ingestion: Not available.

Revision No.: B

Issue Date: 25/08/2010

Pages: 1 of 3

Page 40: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

40

MATERIAL SAFETY: Mild Steel

MSDS-004

Section 5: Fire and Explosion Data

Flammability of the Product: Non-flammable.

Auto-Ignition Temperature: Not available

Flash Points: Not available.

Flammable Limits: Not available.

Products of Combustion: Not available.

Fire Hazards in Presence of Various Substances: Not available Non-flammable in presence of shocks.

Explosion Hazards in Presence of Various Substances: Steel products do not present fire or explosion hazards under normal conditions. Fine metal particles

such as produced in grinding or sawing can burn. High concentrations of metallic fines in air may present an explosion hazard.

Fire Fighting Media and Instructions: SMALL FIRE: Use DRY chemical powder or sand.

Special Remarks on Fire Hazards: Not available.

Special Remarks on Explosion Hazards: Not available.

Section 6: Accidental Release Measures

Small Spill: Fine turnings and small chips should be swept or vacuumed. Scrap metal can be reclaimed for reuse.

Large Spill: Fine turnings and small chips should be swept or vacuumed. Scrap metal can be reclaimed for reuse.

Section 7: Handling and Storage

Precautions: Keep away from heat and direct sunlight. Do not breathe dust.

Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area. Keep from any possible contact with water.

Section 8: Exposure Controls / Personal Protection

Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure

limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.

Personal Protection: Appropriate dust/mist/fume respirator should be used to avoid excessive inhalation of particulates. If exposure limits are reached or

exceeded, use NIOSH approved equipment. Safety glasses should be worn when grinding or cutting. Face shields should be worn when welding or cutting.

Protective gloves should be worn as required for welding, burning or handling operations.

Exposure Limits: Not available.

Section 9: Physical and Chemical Properties

Physical state and appearance: Solid.

Odour: Odourless.

Taste: Not available.

Molecular Weight: 7850 kg/m3.

Colour: Silver-grey

pH (1% soln/water): Not applicable.

Boiling Point: Not applicable

Melting Point: 1,426–1,538°C (2,599–2,800°F)

Critical Temperature: Not available.

Specific Gravity: (H2O = 1): Approx. 1.47.

Vapour Pressure: Not applicable.

Vapour Density: Not available.

Volatility: Not available.

Odour Threshold: Not available.

Water/Oil Dist. Coeff.: Not available.

Ionicity (in Water): Not available.

Dispersion Properties: Not available.

Solubility: Not applicable.

Revision No.: B

Issue Date: 25/08/2010

Pages: 2 of 3

Page 41: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

41

MATERIAL SAFETY: Mild Steel

MSDS-004

Section 10: Stability and Reactivity Data

Stability: The product is stable.

Instability Temperature: Not available.

Conditions of Instability: Steel at temperatures above the melting point may liberate fumes containing oxides of iron and alloying elements. Avoid generation

of airborne fumes and dust.

Incompatibility with various substances: Reacts with strong acids to form Hydrogen gas.

Corrosivity: Non-corrosive in presence of glass.

Special Remarks on Reactivity: Metallic dust or fumes may be produced during welding, burning, grinding and possible machining.

Special Remarks on Corrosivity: Not available.

Polymerization: Will not occur.

Section 11: Toxicological Information

Routes of Entry: Inhalation. Ingestion.

Toxicity to Animals: Not available.

Chronic Effects on Humans: Not available.

Other Toxic Effects on Humans: Slightly hazardous in case of skin contact (irritant), of ingestion, of inhalation.

Special Remarks on Toxicity to Animals: Not available.

Special Remarks on Chronic Effects on Humans: Not available.

Special Remarks on other Toxic Effects on Humans: Acute Potential Health Effects:

Skin: May cause skin irritation. Eyes: May cause eye irritation. Ingestion: May be harmful if swallowed.

Inhalation: Inhalation of steel dust or fumes may cause respiratory tract and mucous membrane irritation with cough and chest pain.

The toxicological properties of this substance have not been fully investigated.

Section 12: Ecological Information

Ecotoxicity: Not available.

BOD5 and COD: Not available.

Products of Biodegradation: Not available

Toxicity of the Products of Biodegradation: Not available.

Special Remarks on the Products of Biodegradation: Not available.

Section 13: Disposal Considerations Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.

Section 14: Transport Information Transport: Mild Steel is considered stable under normal handling conditions. Keep Mild Steel clean and dry during transport.

DISCLAIMER The information above is believed to be accurate and represents the best information currently available to NedMarine Services B.V. However, NedMarine Services B.V. make no warranty of merchantability or any other warranty, express or implied, with respect to such

information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the

information for their particular purposes. In no event shall NedMarine Services B.V. be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if NedMarine

Services B.V. has been advised of the possibility of such damages.

Revision No.: B

Issue Date: 25/08/2010

Pages: 3 of 3

Page 42: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

42

MATERIAL SAFETY: Magnesium Alloy

MHP-005

Section 1: Product Information and Company Identification

Product Name: Magnesium Alloy

Synonym: Mg/Al/Zn

Chemical Name: None Allocated

Chemical Formula: None Allocated

Hazchem Code: None Allocated

Contact Information: NedMarine Services B.V.

Tinstraat 109

2984 AN Ridderkerk

The Netherlands

Tel: +31 (0) 180 420 055

Fax: +31 (0) 180 499 810

Email: [email protected]

Web: www.nedmarine.com

Section 2: Composition and Information on Elements

Elements %

M-Guard Alloy

Alluminium 5.30% - 6.70%

Zinc 2.50% - 3.50%

Copper max. 0.080%

Silicon max. 0.300%

Iron max. 0.005%

Maganese max. 0.250%

Nickel max. 0.003%

Lead max. 0.030%

Magnesium Remainder

Section 3: Hazards Identification

Potential Acute Health Effects: Slightly hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation.

Potential Chronic Health Effects:

CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available.

TERATOGENIC EFFECTS: Not available. DEVELOPMENTAL TOXICITY: Not available.

Repeated or prolonged exposure is not known to aggravate medical condition.

Section 4: First Aid Measures

Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical

attention if irritation occurs.

Skin Contact: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops.

Serious Skin Contact: Not available.

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately.

Serious Inhalation: Evacuate the victim to a safe area as soon as possible. Loosen tight clothing such as a collar, tie, belt or waistband. If breathing is difficult,

administer oxygen. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek medical attention.

Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities

of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar, tie, belt or waistband.

Serious Ingestion: Not available.

Revision No.: B

Issue Date: 25/08/2010

Pages: 1 of 3

Page 43: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

43

MATERIAL SAFETY: Magnesium Alloy

MHP-005

Section 5: Fire and Explosion Data

Flammability of the Product: Flammable.

Auto-Ignition Temperature: Not available.

Flash Points: Not available.

Flammable Limits: Not available.

Products of Combustion: Some metallic oxides.

Fire Hazards in Presence of Various Substances: Highly flammable in presence of open flames and sparks, of heat. Flammable in presence of acids, of

moisture. Non-flammable in presence of shocks.

Explosion Hazards in Presence of Various Substances: Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion

of the product in presence of static discharge: Not available. Explosive in presence of acids, of moisture.

Fire Fighting Media and Instructions: Flammable solid. SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray or fog. Cool containing

vessels with water jet in order to prevent pressure build-up, auto ignition or explosion.

Special Remarks on Fire Hazards: Magnesium turnings, chips or granules, ribbons, are flammable. They can be easily ignited. They may reignite after fire is

extinguished. Produces flammable gases on contact with water and acid. May ignite on contact with water or moist air. Magnesium fires do not flare up

violently unless moisture is present.

Special Remarks on Explosion Hazards: Reacts with acids and water to form hydrogen gas with is highly flammable and explosive

Section 6: Accidental Release Measures

Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.

Large Spill: Flammable solid. Stop leak if without risk. Do not touch spilled material. Use water spray curtain to divert vapour drift. Prevent entry into sewers,

basements or confined areas; dike if needed. Eliminate all ignition sources. Call for assistance on disposal.

Section 7: Handling and Storage

Precautions: Keep away from heat. Keep away from sources of ignition. Ground all equipment containing material. Do not breathe dust. Keep away from

incompatibles such as oxidizing agents, acids, moisture.

Storage: Keep container in a cool, well-ventilated area. Keep container tightly closed and sealed until ready for use. Avoid all possible sources of ignition

(spark or flame). Moisture sensitive. Dangerous when wet.

Section 8: Exposure Controls / Personal Protection

Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure

limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.

Personal Protection: Safety glasses. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.

Personal Protection in Case of a Large Spill: Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to

avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.

Exposure Limits: Not available.

Section 9: Physical and Chemical Properties

Physical state and appearance: Solid. (metal solid)

Odour: Odourless.

Taste: Not available.

Molecular Weight: 2431 kg/m3

Colour: Silver-white

pH (1% soln/water): Not applicable.

Boiling Point: 1100°C (2012°F)

Melting Point: 651°C (1203.8°F)

Critical Temperature: Not available.

Specific Gravity: (H2O = 1) : Approx. 1.74.

Vapour Pressure: Not applicable.

Vapour Density: Not available.

Volatility: Not available.

Odour Threshold: Not available.

Water/Oil Dist. Coeff.: Not available.

Ionicity (in Water): Not available.

Dispersion Properties: Not available.

Solubility: Slightly soluble in hot water. Insoluble in cold water. Insoluble in

chromium trioxides, and mineral acids, alkalis. Soluble in concentrated

hydrogen fluoride and ammonium salts.

Revision No.: B

Issue Date: 25/08/2010

Pages: 2 of 3

Page 44: ALUMINIUM AND ZINC ANODES - Ned Marine Services B.V. Anodes.pdf · 1 ALUMINIUM AND ZINC ANODES AL / ZN / IN Composistion: Zn Electro Chemichal: Potential Ag/AgCI -1.05 Volts Min Capacity

44

MATERIAL SAFETY: Magnesium Alloy

MHP-005

Section 10: Stability and Reactivity Data

Stability: The product is stable.

Instability Temperature: Not available.

Conditions of Instability: Heat, incompatible materials, water or moisture, moist air.

Incompatibility with various substances: Reactive with oxidizing agents, acids, moisture

Corrosivity: Non/corrosive in presence of glass

Special Remarks on Reactivity: Violent chemical reaction with oxidizing agents. Reacts with water to create hydrogen gas and heat. Must be kept dry.

Reacts with acids to form hydrogen gas which is highly flammable and explosive. Magnesium forms hazardous or explosive mixtures with aluminium and

potassium perchlorate; ammonium nitrate; barium nitrate, barium dioxide and zinc; beryllium oxide; boron phosphodiiodide; bromobenzyl trifluoride; cadmium

cyanide; cadmium oxide; calcium carbide; carbonates; carbon tetrachloride; chlorine; chlorine trifluoride; chloroform; cobalt cyanide; copper cyanide; copper

sulphate(anhydrous), ammonium nitrate, potassium chlorate and water; cupric oxide; cupric sulphate; fluorine; gold cyanide; hydrogen and calcium carbonate;

hydrogen iodide; hydrogen peroxide; iodine; lead cyanide; mercuric oxide; mercury cyanide; methyl chloride; molybdenum trioxide; nickel cyanide; nitric acid;

nitrogen dioxide; oxygen (liquid); performic acid; phosphates; potassium chlorate; potassium perchlorate; silver nitrate; silver oxide; sodium perchlorate;

sodium peroxide; sodium peroxide and carbon dioxide; stannic oxide; sulphates; trichloroethylene; zinc cyanide; zinc oxide.

Special Remarks on Corrosivity: Not available.

Polymerization: Will not occur.

Section 11: Toxicological Information

Routes of Entry: Inhalation. Ingestion.

Toxicity to Animals: Not available.

Chronic Effects on Humans: Not available.

Other Toxic Effects on Humans: Slightly hazardous in case of skin contact (irritant), of ingestion, of inhalation.

Special Remarks on Toxicity to Animals: Not available.

Special Remarks on Chronic Effects on Humans: Not available.

Special Remarks on other Toxic Effects on Humans: Acute Potential Health Effects: Skin: May cause skin irritation by mechanical action. May get

mechanical injury or embedding of chips/particles in skin. The particles that are embedded in the wounds may retard healing.

Eyes: May cause eye irritation by mechanical action. Mechanical injury may occur. Particles or chips may embed in eye and retard healing.

Ingestion: Low hazard for usual industrial handling. There are no known reports of serious industrial poisonings with Magnesium. Ingestion of large amounts

of chips, turnings or ribbons may cause gastrointestinal tract irritation with nausea, vomiting, and diarrhoea. Acute ingestion may also result in Hypermagnesia.

Hypermagnesia may cause hypotension, bradycardia, CNS depression, respiratory depression, and impairment of neuromuscular transmission (hyporeflexia,

paralysis).

Inhalation: Low hazard for ususal industrial handling. It may cause respiratory tract irritation. However, it is unlikely due to physical form. When Magnesium

metal is heated during welding or smelting process, Metal Fume Fever may result from inhalation of magnesium fumes. Metal Fume Fever is a flu-like

condition consisting of fever, chills, sweating, aches, pains, cough, weakness, headache, nausea, vomiting, and breathing difficulty. Other symptoms may

include metallic taste, increased white blood cell count. There is no permanent ill-effect.

Section 12: Ecological Information

Ecotoxicity: Not available.

BOD5 and COD: Not available.

Products of Biodegradation: Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.

Toxicity of the Products of Biodegradation: The product itself and its products of degradation are not toxic.

Special Remarks on the Products of Biodegradation: Not available.

Section 13: Disposal Considerations Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.

Section 14: Transport Information Transport: Magnesium Alloy is considered stable under normal handling conditions. Keep clean and dry during transport.

DISCLAIMER The information above is believed to be accurate and represents the best information currently available to NedMarine Services B.V.

However, NedMarine Services B.V. make no warranty of merchantability or any other warranty, express or implied, with respect to such

information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall NedMarine Services B.V. be liable for any claims, losses, or damages of any

third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if NedMarine

Services B.V. has been advised of the possibility of such damages.

Revision No.: B

Issue Date: 25/08/2010

Pages: 3 of 3