ALLEGATO 1 - SPECIFICHE TECNICHE

Index

DESCRIPTION OF LOTS .................................................................................................... 3

LOCOMOTIVE DI850 SPECIFICATIONS ................................................................................... 3

LOCOMOTIVE DE122 SPECIFICATIONS ................................................................................ 10

LOCOMOTIVE D220 SPECIFICATIONS .................................................................................. 16

List of Spare Parts for D220 Locomotives ................................................................................. 20

Bogie with Leaf Springs - Reconditioned for D220.074 ....................................................... 35

Bogie with Buffers - NOT Reconditioned for D220.041/051 ............................................... 35

Bogie with Buffers - NOT Reconditioned for D220.041/051 ............................................... 35

Overhauled Turbo Gearbox for D220 locomotive ................................................................. 36

NOT Overhauled Turbo Gearbox for D220 locomotive ........................................................ 36



LOCOMOTIVE MDD4 SPECIFICATIONS ................................................................................ 38

DESCRIPTION OF LOTS

Locomotive Di850 Specifications

Description of Locomotive Dh850D (Di850)

The locomotive Dh850D by the manufacturer Henschel is technically composed of four D

axles (with connecting rods), diesel engine and hydraulic transmission, with an axle weight

of 15 tons. The locomotive was designed using a structure consisting of two hoods accessed

by side walkways (the ladders of which are located in the locomotive heads) and a centrally

located tower cab.

Inside the front hood, with a rectangular structure, is installed the drive unit consisting of a

diesel engine, the hydraulic transmission and the radiator.

In the rear part, a trapezoidal hood, the compressor unit is installed with its cooling system

and pneumatic block.

As regards the distribution of space in the cab and the driving position, it should be noted

that there are two separate driving seats placed diagonally to the right for each direction of

travel.

The engine power is provided by a 12-cylinder Mercedes-Daimler Benz MB 820 Bb/7 diesel

engine in a V-formation with a power output of about 850 hp at 1500 rpm, which drives the

Voith L217 U hydraulic gearbox via a flexible coupling and a cardan shaft; the wheelsets

and their connecting rods are driven by the shaft. The locomotive Di850.003 has been

refitted with an 8-cylinder Caterpillar 3508B engine

As regards the Safety System, the "Vigilante" system and the Chronological Recording of

driving events of the SERATEC type have been installed.

The air compressors are driven by the diesel engine by means of V-belts.

The locomotive is equipped with an automatic continuous brake and a direct (moderatable)

brake, which can be controlled from both driver's cabs with a Type WA-8/F tap and a Type

RAM 2 self-regulating tap, respectively.

In order to provide a better detail of the locomotive characteristics, some of the main

technical and dimensional data are given below.

Technical Data of Locomotive Dh850D (Di850)

Manufacturer Henschel

Type Dh 850D (Di850)

Registration

Serial Number EVN Number Manufacturer’s

Number

Year of

Manufacture

850.003 92 83 2850 003-0 26530 1959

850.004 92 83 2850 004-8 30308 1961

850.005 92 83 2850 005-5 30339 1961

850.006 Not registered 1961

State of Locomotive

Locomotive

Serial

Number

Km Engine

Hours

Authorizations to Travel State of Maintenance

Di850.003 33,686 18,013 In possession of a Log Book

issued by USTIF Bologna

according to D.P.R 753/1980.

The Locomotive holds

authorization to run on specific

lines/plants of the

Infrastructure Manager FER -

Ferrovie Emilia Romagna

Underbody problems -

Last preventive

maintenance performed in

2018






lines/plants of the



Wheel arrangement

problem - Last preventive


2015 The diesel engine is

disassembled and

available in Reggio Emilia






lines/plants of the



Wheel arrangement

problem - Last preventive


2018 The diesel engine is

disassembled and

available in Reggio Emilia

Di850.006 / / Locomotive NOT circulating Usable as spare parts

Technical Characteristics of Locomotive Dh850D (Di850)

Engine and Fuel System Characteristics

Size Unit of Measurement Value

Rated power HP 850

Combustion engine type - Engine Type MB 820 Bb/7 with

12 cylinders

Manufacturer - Mercedes - Benz

Type of Bogies - D (Drive axles coupled by

connecting rods)

Transmission - Hydraulic - Voith - Type L217 U

Fuel Tank Capacity l 2,500

Engine Characteristic Curve

Locomotive Dimensions

Exceeding the construction

limit profile

(Fiche 505-1)

- Does not exceed FS Profile

Draw and buffering gear - Unified

Maximum height above rail mm 4,240

Length including

uncompressed buffers

mm 11,050

Gauge mm 1,435

Body width mm 3,040

Minimum track negotiation

radius on a bend at reduced

speed

m 80

Mass and Speed

Real Mass t 60

Axle Mass t 15

Maximum speed during

manoeuvring

km/h 30

Maximum speed for transfer

over IFN lines (unless more

restrictive conditions are set by the IM or

ECM)

km/h 60

Type of Wheelset With shrink-fitted rim

Diameter of wheels, new/worn mm 1250/1160

Can be incorporated in train

composition

- YES

Brake

Distributor Westinghouse Type U960

Braking mass P/G t 48

Braking mass with parking

brake

(by hand)

t -

Locomotive De122 Specifications

Description of Locomotive De122

The locomotive De122 by the manufacturer IMPA is technically composed of four axles

(Wheel arrangement Type B'o+B'o), diesel engine with electric transmission, with an axle

weight of 17 tons/axle.

The locomotive is designed with a symmetrical structure consisting centrally of the engine

room, 2 access areas to the engine room immediately behind the 2 driving cabs located at

the ends of the locomotive. Each driving cab is equipped with a control desk, the installed

traction unit consists of 2 three-phase Jeumont-Schneider TM705S type alternators,

powered by 2 Isotta Fraschini diesel engines type ID36 SSV8. The movement is transmitted

to the wheels (4 driving wheelsets - wheel arrangement type Bo'+Bo') by means of 4 electric

traction motors type TM689S. The 2 bogies are equipped with equipment such as

sandboxes (controlled from the driving seat) and automatic wheel flange lubrication device.


brake, which can be controlled from both driver's cabs with an Oerlikon Type FV-3b tap and

a RAM 2 type self-regulating tap, respectively. The braking system consists of 2

compressors of the type Westinghouse 241P that feed the group of main tanks respectively

2 of 360 lt and 1 of 250 lt, a distributor of the type Westinghouse U (equipped with the

Freight-Travellers device, isolation valve, double discharge valve and relay valve A1). As

regards the Safety System, the "Vigilante" system has been installed.



Technical Data of Locomotive DE122

Manufacturer IMPA - Catania

Type De122

Registration

Serial

Number

EVN Number Manufacturer’s

Number

Year of Manufacture

De122.009 92 83 2122 009-9 122.009 1989

De122.010 92 83 2122 010-7 122.010 1989

State of Locomotive

Locomotive Serial

Number

K

m

Engine

Hours 1

Engine

Hours 2

Authorization to

Travel

State of

Maintenance

De122.009 4

0

6

0

0

7

25,176 24,694 In possession of a

Log Book issued by

USTIF Bologna

according to D.P.R

753/1980. The

locomotive to date

has no authorization

to travel on the

National Rail

Infrastructure (IFN)

network.

Good condition -

Last preventive

maintenance

performed in

2015

De122.010 3

3

0

,

0

6

0

21,351 21,513 In possession of a

Log Book issued by

USTIF Bologna

according to D.P.R

753/1980. The

locomotive to date

has no authorization

to travel on the

National Rail

Good condition -

Last preventive

maintenance

performed in

2015

Infrastructure

network



Rated power kW 610 at 1800 rpm

Combustion engine

type

- 2 Engines Type ID36 SSV8

Manufacturer - Isotta Fraschini

Type of Bogies - Bo’ + Bo’

Transmission - Electric

Fuel Tank Capacity l 2 x 1200

Engine

Characteristic Curve


UIC Loading Gauge - Does not exceed FS Profile

Draw and buffering

gear

- Unified

Maximum height

above rail

mm 4,282

Length including

uncompressed

buffers

mm 15,840

Length between the

2 heads

mm 14,500

Bogie pivot pitch mm 9,400

Bogie wheelbase mm 2,400

Gauge mm 1,435

Body width mm 3,000

Minimum track

negotiation radius

on a bend at

reduced speed

m 80

Mass and Speed

Real Mass t 68.6

Axle Mass t 17

Maximum speed

during manoeuvring

km/h 30

Maximum speed for

transfer over IFN

lines (unless more

restrictive conditions are

set by the IM or ECM)

km/h 100


Diameter of wheels,

new/worn

mm 1040/960

Can be incorporated

in train composition

- YES

Brake

Braking mass P/G t 59/59

Braking mass with

parking brake (by

hand)

t -

Locomotive D220 Specifications

Description of Locomotive D220

The locomotive D220 by the manufacturer Krauss Maffei is technically composed of four

axles with shrink-fitted rim (Wheel arrangement Type B-B), 2 Caterpillar diesel engines mod.

3508B with hydraulic transmission (Voith L306 gearboxes), with an axle weight of 18 t/axle.

The locomotive is designed with a symmetrical structure, 2 driving cabs at the heads and at

the centre of the locomotive a compartment that contains the 2 diesel engines, the 2 Voith

gearboxes and the air production parts. This compartment is accessible through 2 doors in

communication with the driving cabs.


that in each cab there is a driver's seat located on the left (direction of travel).

As regards the Safety System, the "SCMT" Train Control System by the manufacturer

Alstom has been installed; the locomotive is also equipped with an integrated hotbox

detector


brake, which can be controlled from both driver's cabs, as well as a "hand" parking brake.



Technical Data of Locomotive D220

Manufacturer Krauss Maffei

Type D220

Registration

Serial Number EVN Number Manufacturer’s Number Year of

Manufacture

D220.041 92 83 2220 041 – 3 / 1956

D220.051 92 83 2220 051 – 2 / 1957

D220.074 92 83 2220 074 - 4 / 1959

State of Locomotive

Locomotive Serial

Number

Km Engine Hours Authorization to Travel State of

Maintenance

D220.041 294,800 13686/13281 In possession of a

Technical Permit with

prescriptions, issued by RFI

in compliance with RFI

Provisions no.1/2003 and

no.30/2007. The locomotive

is currently used for

line/shunting freight

services on the National

Railway Infrastructure

managed by RFI and FER.

Good condition












Good condition












Good condition



Rated power kW 820 kW (each)

Combustion engine type - 8-cylinder Caterpillar engine

type 3508B

Manufacturer - Caterpillar

Type of Bogies - B+B

Transmission - Hydraulic - Voith

Fuel Tank Capacity l 4000


UIC Loading Gauge - Does not exceed FS Profile



Length including uncompressed

buffers

mm 18,500

Bogie pivot pitch mm 11,500

Bogie wheelbase mm 3,200

Gauge mm 1435

Body width mm 3,082



speed

m 100

Mass and Speed

Real Mass t 72

Axle Mass t 18


manoeuvring

km/h 30


over IFN lines (unless more restrictive

conditions are set by the IM or ECM)

km/h 90


Diameter of wheels, new mm 950


composition

- YES

Brake

Braking mass P/G t 58

Braking mass with parking brake

(by hand)

t 13

List of Spare Parts for D220 Locomotives

Kit Ricambi Locomotiva D220.074

prodotto Descrizione UM Q.tà

7328 COMMUTATORE C 4040 IM 1 N 1

7301 CONDENSATORE RS 2550232 N 1

7382 CONNETTORE PER VALV.131002001 N 3

9225 CONTATTO AUSILIARIO EI 410 1 N 1

33940 APPLICATORE DESTRO STICK UNGIBORDO LOCOMOT. N 4

33941 APPLICATORESINISTRO STICK UNGIBORDO LOCOMOT. N 3

37058 96/HF6057 FILTRO OLIO IDRAULICO N 1

7388 ACCOPPIATORE ILME CNM 32 150 N 1

23606 ACCOPPIATORI ELETTRICI A 78 POLI PARTE MOBILE/FEMMINA N 1

32856 ALBERO TRASMISSIONE CAMBIO/PONTE LOC. REVISIONATO N 2

32854 ALBERO TRASMISSIONE CLIMA LOCOMOTORE REVISIONATO N 1

32855 ALBERO TRASMISSIONE MOTORE CAMBIO LOCOM. REVISIONATO N 1

23861 ALTERNATORE LEECE-NEVILLE 8SC3068V COD.110-431 N 2

34566 AMMORTIZZATORE PER LOCOM. D220 N 6

39103 AMMORTIZZATORE VERTICALE SACHS 40 1300 000 367 01 PER LOC.

D220 N 5

7201 ANELLO 007 603 010 110 N 3

7205 ANELLO 007 603 012 111 N 2

7203 ANELLO 007 603 016 105 N 1

7206 ANELLO 007 603 018 101 N 2

7204 ANELLO 007 603 022 102 N 2

7202 ANELLO 007 603 030 101 N 2

7194 ANELLO 135 C05 008/1 N 15

7237 ANELLO 135 M01 069/1 N 2

7283 ANELLO 135A15003/1 N 26

7277 ANELLO 5600100140 N 1

7276 ANELLO 806A06016/1 N 1

7340 ANELLO DI REGOLAZIONE 20820B N 1

24034 ANELLO DI TENUTA 1/017315 N 3


19693 ANELLO DI TENUTA 937775238U01 N 1

21413 ANELLO OR RIF.6412 N 2

19691 ANELLO PARAOLIO 12 22 7 N 1

35118 ANELLO PARAOLIO 12X22X7 N 3




7299 ANELLO PARAOLIO 68 90 10 A N 3

7148 ANELLO TENUTA 135D 11003/1 N 13

7149 ANELLO TENUTA 135D 11005/1 N 16

35980 ANELLO TENUTA C160 X 190 X 15 H01.004701 N 3

23655 ANELLO UM 158 N 12

7379 ANTIVIBRANTE B 030 030 N 2

7297 ANTIVIBRANTE VIBROSTOP AA/100N N 2

33318 ARTICOLAZIONE ANGOLARE MM.12 PER RECUPERATORE DI GIOCO N 9

7391 BOBINA 24Vdc COD.130112003 N 2

7193 BOCCOLA 135 D11 006/1 N 4

7255 BUSSOLA 135A45004/2 N 73

7288 BUSSOLA 135L22702/5 N 2

21207 BUSSOLA SFERA 100/80X50 30.2168.40 N 2

23684 CA 2860284 PROTEZIONE N 1

7298 CALETTATORE RING FEDER RFN7012 N 1

7375 CAMICIA MOTORE V6M 436 N 2

7341 CAPPA DI PROTEZIONE 265721 N 1

19629 CARTUCCIA FILTRO 1/316548 N 9

7326 CASSETTA BRETER PT30-1H N 1

32544 CATENA CARRELLO LOC. 220 N 8

24201 CENTRALINA ELETTRONICA TIPO MTB4 N 1

7374 CEPPO FRENO LD N 7

34841 CHIAVE PLASTIFICATA NERA cod 1314 NON STAMPIGLIATA N 6

7383 CILINDRO PNEUMAT. CM/8050C/100 N 1

35322 CINGHIA A55 CLIMA LOCOMOTORE N 7

7294 CINGHIA PIRELLI 3V 355 mm.900 N 1



19701 CINGHIA Z 36 N 2

32668 COLONNA RADIANTE LOC 220 (REVISIONATA) N 1

7350 CUSCINETTO 22336 MB C3 F2 N 5

7359 CUSCINETTO 31319 AM QP51 F59 N 2

7355 CUSCINETTO 6040 M.C3 N 2

7292 CUSCINETTO 6310 SKF N 2

7272 CUSCINETTO 806B02703/1 N 1

7273 CUSCINETTO 806B02705/1 N 2

7356 CUSCINETTO NU 1040M1A C3 N 1

33464 CUSCINETTO NU 2312 EN M1A C3 + SP130 N 2



7363 CUSCINETTO QJ 1040N2 MPA C3 N 1

7507 CUSCINETTO TAMPONE CARRI E LOC N 11

7361 DADO AUTOBLOCC. M 16x1,5 0369 N 39

19705 DERIVATORE N 1

19647 DOPPIA VALVOLA 1/048350 N 1

23143 ELEMENTO SENSIBILE 40.403.05 taratura 75°-85°C N 1


34750 ELETTROVALVOLA 1/169585 N 1

7369 ELETTROVALVOLA 75523F91 N 1

7278 FASCIA 135M01712/1 N 12

7367 FASCIA ELASTICA 0020373819 N 13

21283 FILTRO GASOLIO CA 1R0756 N 1

7377 FILTRO NAFTA N-11950RS N 1

7290 FILTRO OLIO 69504F91 N 1

21281 FILTRO OLIO CA 1R0726 N 5

7387 FILTRO TAZZA MET.F11-200-A3DD N 1

32890 FLANGIA A DISCO PER BARRA REAZIONE PONTE LOC. 220 N 2

7338 FOTORESISTENZA 19970A N 2

32543 FUNE DI SICUREZZA LOC. 220 N 8

3606 FUSIBILE 200A 500V PER LOCOMOTORI 220 N 2

7280 FUSIBILE 63A 500V (001CA03196) N 2

7161 FUSIBILE 80A 500V N 6

7322 FUSIBILE A COLTELLO LEG 17365 N 35

7175 FUSIBILE NH1 200A 500V N 1

3604 FUSIBILE WEBER 500V - 1510200 PER LOCOMOTORI 220 N 2

3608 FUSIBILE WEBER NHO 100A N 3


35793 GANCIO DI TRAZIONE PER LOCOMOTORE 220 N 1

22912 GENERATORE INDUTTIVO BES 516-113-S4-C N 2

7300 GHIERA AUTOBLOCCANTE M 35x1,5 N 2

33309 GIUNTO PARASTRAPPI VULKARDAN-L 2111/1640/2/8" N 1

7311 GUARNIZ. P/COPERCHIO 61543F01 N 15

7286 GUARNIZ.COPPA OLIO 5600140122 N 1

7195 GUARNIZIONE 135 C01 004/1 N 16

7196 GUARNIZIONE 135 C05 007/1 N 14

7200 GUARNIZIONE 135 C21 002/3 N 1

19709 GUARNIZIONE 1Q 605987 N 16

35947 GUARNIZIONE 28X38X5 H01.004087 PER VALVOLA PALPATRICE N 6

7285 GUARNIZIONE 5030211380 N 2

7178 GUARNIZIONE 560 016 01 80 N 15

7180 GUARNIZIONE 560 051 00 80 N 1

7181 GUARNIZIONE 560 051 01 80 N 1

7197 GUARNIZIONE 560 051 07 80 N 2

7198 GUARNIZIONE 560 051 10 80 N 3

7179 GUARNIZIONE 560 051 16 80 N 1

7210 GUARNIZIONE 560 051 22 80 N 2

7234 GUARNIZIONE 560 051 29 80 N 1

7235 GUARNIZIONE 560 051 30 80 N 1

7236 GUARNIZIONE 560 051 32 80 N 3

7211 GUARNIZIONE 560 052 00 80 N 2

7188 GUARNIZIONE 560 098 01 80 N 6

7192 GUARNIZIONE 560 187 04 80 N 1

7190 GUARNIZIONE 560 203 02 80 N 13

7199 GUARNIZIONE 560 997 26 49 N 1

7215 GUARNIZIONE 561 011 00 59 N 25

7189 GUARNIZIONE 561 098 18 80 N 1

7186 GUARNIZIONE 561 142 06 80 N 12

7191 GUARNIZIONE 561 203 34 80 N 1

7251 GUARNIZIONE 5612030980 N 1

7250 GUARNIZIONE 5612031080 N 1

7275 GUARNIZIONE 806A06020/1 N 13

19694 GUARNIZIONE 9.905634F0 N 1

7176 GUARNIZIONE K6 10x15,5x5,5 N 1

7177 GUARNIZIONE K6 8x15,5X6 N 2

7293 GUARNIZIONE OR RIF.4437 N 3

35946 GUARNIZIONE PIANA 8X16X3 H01.004087 PER VALVOLA

PALPATRICE N 6

23538 GUARNIZIONE POLYPAC DBM 196133 N 2

7389 INTERR.BRETER 2x20A 130211/C N 2

35901 INTERRUTTORE ABB S 501-UC B 10 LOCOMOTORI 220 N 2

9206 INTERRUTTORE ABB S 501-UC B 16 N 1

22233 INTERRUTTORE FINECORSA D-U1 RW 604.1118.008 N 1

7384 KIT GUARN.CILINDRO QM/8050/00 N 6

24248 KIT PULEGGIA COD.860607 N 1

34625 KIT REVISIONE CORPO SUP. ESSICATORE SD7-3 KT-0111 N 2

7335 KIT RISCALDAM. UGELLO 83933A N 1

33946 KIT TESTATA COMPRESSORE LOCOMOTORI 220 AC 1

7271 LAMPADA 24V 40W BA22D RIF.4007 N 7

1670 LAMPADINA 125V 15W PER LOCOMOTORI 220 N 2

7386 LUBRIFICATORE A MICRONEBBIA 1/4"-L11-200-MLRD N 1

19696 MANOMETRO 283486.1 CAT.226/419 N 1

21177 MOLLA AD ELICA FILO 5-D.E.40-LL.135-PASSO 5-SPIRE 27 N 5

7315 MOLLA DI FISSAGGIO RPB 48 N 6

7209 MOLLA SPINTA 135 D21 024/1 N 3

24242 MOTORINO TERGICRISTALLO COD. 478031 (LOC E 640) N 2

35119 OR 2050 N 3

35945 OR 29,3 X 3 H01.004221 PER VALVOLA PALPATRICE N 6

21989 OR VITON N 2

45035 PERNO CON TESTA M 20x50 UNI1713 N 16

35948 PISTONE D 8,5X6,8 H01.004087 PER VALVOLA PALPATRICE N 6

7360 POLVERIZZATORE 77826F91 N 3

19641 PRESSOSTATO 1/237367 N 1

7303 PRESSOSTATO 4140F-K1E11AA0-EE N 1

7348 RACCORDO AD OCCHIELLO 277312 N 1

22183 RELE' AMRA OKUIC-DI-LED 24V (18-33) - 1539472 -499905/94 N 1

7316 RELE' OKRE 24Vcc 18-33 ECC.15" N 1


7319 RELE' OKTA 24Vcc 18-33 ECC.60" N 1

7390 RELE' OMRON MOD.MK 2P-S 24V DC N 2

7321 RELE' POK 24Vcc 19-30 N 1

33219 RINVIO COMPRESSORE LOC. 220 REVISIONATO N 1

34435 RISCALDATORE ANTERIORE 1/356472 N 1

34436 RISCALDATORE POSTERIORE 1/356477 N 1

19699 RONDELLA SCHNORR 0 493 12 N 5


7150 ROSETTA 5600740280 N 16

19703 RUBINETTO M 4 VIE DOPPIA L 1"G N 3

7366 SEGMENTO CONICO 135B14055/1 N 26

34602 SENSORE VDO 323 805 003 0 N 1

7349 SENSORE OTTICO DI LIVELLO PNP N 1

22902 SENSORE SIEMENS VDO 323 805 003 001 N N 1

32581 Sensore termico mod. NSF 1 P contatto NC N 7

33272 SERRATURA 87X68 LOC. 220 N 17

7380 SILENZIATORE SCARICO 160801002 N 5

19681 SOLENOIDE 16V-30V H01.017107 N 1

7155 SPAZZOLA 16.8.30 D N 1

7156 SPAZZOLA 16.8.30. C N 2

7213 SPAZZOLA 20x12x8 N 6

7154 SPAZZOLA 35.16.25 N 4

7159 SPAZZOLA 40.16.45 N 2

7157 SPAZZOLA 8.8.22. B N 2

7158 SPAZZOLA 8.8.22.A N 11

7281 SPAZZOLA 8x14 h 28 COD.1201151 N 4

7207 SPESSORE 135 D21 020/1 N 2

7208 SPESSORE 135 D21 021/1 N 2

7220 SPESSORE 135C06023/3 4,40 N 1

7254 SPESSORE 135C06025/3 4,50 N 1

7351 SPESSORE 135C06027/3 4,60 N 1

7308 SPESSORE 135C06029/3 4,70 N 1

7222 SPESSORE 135C06030/3 4,75 N 1

7223 SPESSORE 135C06032/3 4,80 N 1

7242 SPESSORE 2,0 717115050100 N 1

7243 SPESSORE 2,2 717115050101 N 1

7244 SPESSORE 2,4 717115050102 N 1

7245 SPESSORE 2,6 717115050103 N 1

7246 SPESSORE 2,8 717115050104 N 1

7312 SPESSORI REG. INIETTORI 936040 N 15

34022 SUPPORTO APPLICATORE UNGIBORDO DX LOC. 220 N 3

34023 SUPPORTO APPLICATORE UNGIBORDO SX LOC. 220 N 3

7371 TELERUTTORE RIPETIT. 400810F91 N 1

35220 TENDINA ART. 27/7L 07 mm.1360 X 650 N 1

34555 TENDITORE TIPO - U PER LOCOMOTORE FS 244/766 N 1

7162 TENUTA COMPLETA D.8 N 1

21284 TENUTA FILTRI GASOLIO CA 5D5957 N 3

21282 TENUTA FILTRI OLIO CA 6V3907 N 4

34603 TERMOMETRO VDO 310 040 003 G N 3

22901 TERMOMETRO SIEMENS VDO 310 040 003 G N 1

34640 TERMOSTATO 4140D - H1C00CB2-EE N 1

7306 TERMOSTATO 4140E-H1C00CB4-EE N 1

7337 TESTA MAGNETICA 29313A N 1

33950 TESTINA SNODATA TIRANTE FRENO LOC 220 N 6

22187 TIMER CRT 60 N 1

23879 TRASMETTITORE DI PRESSIONE 1303.0006 N 1

24243 TUBAZIONE CA7C7677 N 1


7274 TUBO 806A06004/1 N 6

7344 TUBO ASPIRAZIONE 87787A N 2

39868 TUBO EQUATOR R1T 3/4 L.540 RACC. F.ERM.F.ERM.25S N 1

34802 TUBO FLESS. 1/4 R1 F-F 12 X1,5 L. 610 MANOMETRO LOC 220 N 14

11760 TUBO FLESSIBILE AEROTERMO 1529882 N 2


21988 TUBO PIREX sp.4,5 P/ INDIC. LIVELLO LMU/P+RI=300mm. N 2

7365 TUBO R3 1"1/4 L.1000 R.FF1"1/4 N 1

33965 TUBO RACCORDATO PER COMPRESSORE LOCOM. 220 N 2

7381 VALV.ELETTROPN.5/2 810012060/3 N 1

7151 VALVOLA INIEZIONE 000N33714/1 N 4

7385 VALVOLA MANUALE 3/2 810011010 N 1

19648 VALVOLA PULSANTE 1/012320 N 2

44661 VETRO FRONTALE DX 10+10MM. RISCALDANTILOCO D 220 N 1

44662 VETRO FRONTALE SX 10+10MM. RISCALDANTILOCO D 220 N 1

23534 VOLTAMPEROMETRO FS883M/074 FA88ML N 1


prodotto descrizione UM Q.tà









39103

AMMORTIZZATORE VERTICALE SACHS 40 1300 000 367 01 PER

LOC. D220 N 5

7201 ANELLO 007 603 010 110 N 3

7205 ANELLO 007 603 012 111 N 1

7203 ANELLO 007 603 016 105 N 1

7206 ANELLO 007 603 018 101 N 1

7204 ANELLO 007 603 022 102 N 1

7202 ANELLO 007 603 030 101 N 1

7194 ANELLO 135 C05 008/1 N 15

7237 ANELLO 135 M01 069/1 N 2

7283 ANELLO 135A15003/1 N 26

7277 ANELLO 5600100140 N 1

7276 ANELLO 806A06016/1 N 1








7148 ANELLO TENUTA 135D 11003/1 N 13

7149 ANELLO TENUTA 135D 11005/1 N 16


23655 ANELLO UM 158 N 12



33318

ARTICOLAZIONE ANGOLARE MM.12 PER RECUPERATORE DI

GIOCO N 9

7391 BOBINA 24Vdc COD.130112003 N 2

7193 BOCCOLA 135 D11 006/1 N 4

7255 BUSSOLA 135A45004/2 N 73

7288 BUSSOLA 135L22702/5 N 1

21207 BUSSOLA SFERA 100/80X50 30.2168.40 N 2



















7272 CUSCINETTO 806B02703/1 N 1

7273 CUSCINETTO 806B02705/1 N 2










7278 FASCIA 135M01712/1 N 12








7280 FUSIBILE 63A 500V (001CA03196) N 2












7195 GUARNIZIONE 135 C01 004/1 N 16

7196 GUARNIZIONE 135 C05 007/1 N 14

7200 GUARNIZIONE 135 C21 002/3 N 1



7285 GUARNIZIONE 5030211380 N 1

7178 GUARNIZIONE 560 016 01 80 N 15

7180 GUARNIZIONE 560 051 00 80 N 1

7197 GUARNIZIONE 560 051 07 80 N 1

7198 GUARNIZIONE 560 051 10 80 N 3

7179 GUARNIZIONE 560 051 16 80 N 1

7210 GUARNIZIONE 560 051 22 80 N 1

7236 GUARNIZIONE 560 051 32 80 N 3

7211 GUARNIZIONE 560 052 00 80 N 1

7188 GUARNIZIONE 560 098 01 80 N 6

7190 GUARNIZIONE 560 203 02 80 N 13

7199 GUARNIZIONE 560 997 26 49 N 1

7215 GUARNIZIONE 561 011 00 59 N 25

7186 GUARNIZIONE 561 142 06 80 N 12

7275 GUARNIZIONE 806A06020/1 N 13





35946

GUARNIZIONE PIANA 8X16X3 H01.004087 PER VALVOLA

PALPATRICE N 6











19696 MANOMETRO 283486.1 CAT.226/419 N 1



7209 MOLLA SPINTA 135 D21 024/1 N 3


35119 OR 2050 N 3


21989 OR VITON N 2








7321 RELE' POK 24Vcc 19-30 N 1





7150 ROSETTA 5600740280 N 16








7155 SPAZZOLA 16.8.30 D N 1

7156 SPAZZOLA 16.8.30. C N 2


7154 SPAZZOLA 35.16.25 N 4

7159 SPAZZOLA 40.16.45 N 2

7157 SPAZZOLA 8.8.22. B N 2

7158 SPAZZOLA 8.8.22.A N 11

7281 SPAZZOLA 8x14 h 28 COD.1201151 N 4

7207 SPESSORE 135 D21 020/1 N 1

7208 SPESSORE 135 D21 021/1 N 1

7220 SPESSORE 135C06023/3 4,40 N 1

7254 SPESSORE 135C06025/3 4,50 N 1

7351 SPESSORE 135C06027/3 4,60 N 1

7308 SPESSORE 135C06029/3 4,70 N 1

7222 SPESSORE 135C06030/3 4,75 N 1

7242 SPESSORE 2,0 717115050100 N 1

7243 SPESSORE 2,2 717115050101 N 1

7244 SPESSORE 2,4 717115050102 N 1

7245 SPESSORE 2,6 717115050103 N 1

7246 SPESSORE 2,8 717115050104 N 1




34284 TAMPONE SOSPENSIONE LOC. 220 N 28

34254 TAMPONE SOSPENSIONE PRIMARIA B LOC. 220 N 53

32891 TAMPONE SOSPENSIONE SECONDARIA LOC. 220 N 17

45034 TASSELLO ELASTICO CARRELLO 1504376 N 10

34827 TASSELLO ELASTICO LOC D 220 - MATTIOCCO cod. C6812 N 33













7274 TUBO 806A06004/1 N 6








7381 VALV.ELETTROPN.5/2 810012060/3 N 1







prodotto descrizione UM Loco tamponi

completo









39103

AMMORTIZZATORE VERTICALE SACHS 40 1300 000 367 01 PER LOC.

D220 N 6

7201 ANELLO 007 603 010 110 N 4

7205 ANELLO 007 603 012 111 N 2

7203 ANELLO 007 603 016 105 N 2

7206 ANELLO 007 603 018 101 N 2

7204 ANELLO 007 603 022 102 N 2

7202 ANELLO 007 603 030 101 N 2

7194 ANELLO 135 C05 008/1 N 15

7237 ANELLO 135 M01 069/1 N 2

7283 ANELLO 135A15003/1 N 27

7277 ANELLO 5600100140 N 2

7276 ANELLO 806A06016/1 N 1








7148 ANELLO TENUTA 135D 11003/1 N 15

7149 ANELLO TENUTA 135D 11005/1 N 18


23655 ANELLO UM 158 N 14



33318 ARTICOLAZIONE ANGOLARE MM.12 PER RECUPERATORE DI GIOCO N 9

7391 BOBINA 24Vdc COD.130112003 N 3

7193 BOCCOLA 135 D11 006/1 N 4

7255 BUSSOLA 135A45004/2 N 74

7288 BUSSOLA 135L22702/5 N 2

21207 BUSSOLA SFERA 100/80X50 30.2168.40 N 2



















7272 CUSCINETTO 806B02703/1 N 2

7273 CUSCINETTO 806B02705/1 N 4










7278 FASCIA 135M01712/1 N 12








7280 FUSIBILE 63A 500V (001CA03196) N 3












7195 GUARNIZIONE 135 C01 004/1 N 18

7196 GUARNIZIONE 135 C05 007/1 N 16

7200 GUARNIZIONE 135 C21 002/3 N 2



7285 GUARNIZIONE 5030211380 N 2

7178 GUARNIZIONE 560 016 01 80 N 16

7180 GUARNIZIONE 560 051 00 80 N 2

7197 GUARNIZIONE 560 051 07 80 N 2

7198 GUARNIZIONE 560 051 10 80 N 3

7179 GUARNIZIONE 560 051 16 80 N 1

7210 GUARNIZIONE 560 051 22 80 N 2

7236 GUARNIZIONE 560 051 32 80 N 4

7211 GUARNIZIONE 560 052 00 80 N 2

7188 GUARNIZIONE 560 098 01 80 N 8

7190 GUARNIZIONE 560 203 02 80 N 14

7199 GUARNIZIONE 560 997 26 49 N 2

7215 GUARNIZIONE 561 011 00 59 N 26

7186 GUARNIZIONE 561 142 06 80 N 14

7275 GUARNIZIONE 806A06020/1 N 15





35946

GUARNIZIONE PIANA 8X16X3 H01.004087 PER VALVOLA

PALPATRICE N 8











19696 MANOMETRO 283486.1 CAT.226/419 N 2



7209 MOLLA SPINTA 135 D21 024/1 N 4


35119 OR 2050 N 3


21989 OR VITON N 4








7321 RELE' POK 24Vcc 19-30 N 1





7150 ROSETTA 5600740280 N 16








7155 SPAZZOLA 16.8.30 D N 2

7156 SPAZZOLA 16.8.30. C N 2


7154 SPAZZOLA 35.16.25 N 4

7159 SPAZZOLA 40.16.45 N 4

7157 SPAZZOLA 8.8.22. B N 2

7158 SPAZZOLA 8.8.22.A N 11

7281 SPAZZOLA 8x14 h 28 COD.1201151 N 6

7207 SPESSORE 135 D21 020/1 N 2

7208 SPESSORE 135 D21 021/1 N 2

7220 SPESSORE 135C06023/3 4,40 N 1

7254 SPESSORE 135C06025/3 4,50 N 1

7351 SPESSORE 135C06027/3 4,60 N 2

7308 SPESSORE 135C06029/3 4,70 N 1

7222 SPESSORE 135C06030/3 4,75 N 1

7242 SPESSORE 2,0 717115050100 N 2

7243 SPESSORE 2,2 717115050101 N 2

7244 SPESSORE 2,4 717115050102 N 1

7245 SPESSORE 2,6 717115050103 N 2

7246 SPESSORE 2,8 717115050104 N 2




34284 TAMPONE SOSPENSIONE LOC. 220 N 28

34254 TAMPONE SOSPENSIONE PRIMARIA B LOC. 220 N 53

32891 TAMPONE SOSPENSIONE SECONDARIA LOC. 220 N 17

45034 TASSELLO ELASTICO CARRELLO 1504376 N 10

34827 TASSELLO ELASTICO LOC D 220 - MATTIOCCO cod. C6812 N 33













7274 TUBO 806A06004/1 N 8








7381 VALV.ELETTROPN.5/2 810012060/3 N 1






Bogie with Leaf Springs - Reconditioned for D220.074

Serial No. Photo

7320026

Bogie with Buffers - NOT Reconditioned for D220.041/051

Serial No. Photo

7290104

Bogie with Buffers - NOT Reconditioned for D220.041/051

Serial No. Photo

730160

Overhauled Turbo Gearbox for D220 locomotive

Serial No. Photo

3683

NOT Overhauled Turbo Gearbox for D220 locomotive

Serial No. Photo

6333577


Serial No. Photo

6333678


Serial No. Photo

6319649

Locomotive MDD4 Specifications

Description of Locomotive MDD4

The locomotive MDD4 by the manufacturer Express Service is technically composed of two

axles, diesel engine and hydraulic transmission, with an axle weight of 20.5 tons. The

locomotive was designed using a structure consisting of two hoods accessed by side

walkways (the ladders of which are located in the locomotive heads) and a semi-centrally

located tower cab.

Inside the front hood, with a rectangular structure, is installed the drive unit consisting of a

diesel engine, the hydraulic transmission and the cooling system.

In the rear part, a trapezoidal hood, the compressor unit is installed with its air production

system and the electric panel.


that there are two separate driving seats placed diagonally to the left for each direction of

travel.

The engine power is provided by a Caterpillar diesel engine type C15 with 6 cylinders in line

and a power of about 403 kW at 1800 rpm.

As regards the Safety System, the "Dead Man" surveillance system and the Chronological

Recording of driving events of the UNICONTROL type have been installed.



Technical Data of Locomotive MDD4

Manufacturer Express Service ODD Bulgaria

Type MDD4

Registration

Serial Number EVN Number Manufacturer’s

Number

Year of

Manufacture

MDD4-01

2012

Locomotive Condition

Locomotive

Serial

Number

Km Engine

Hours

Authorizations to Travel State of Maintenance

MDD4

1746 Private Connections In compliance with

maintenance deadlines

Technical Characteristics of Locomotive MDD4



Rated power kW 403

Combustion engine type - 6-cylinder engine type C15

Manufacturer - Caterpillar

Type of Bogies - Loco with 2 axles

Transmission - Hydraulic

Fuel Tank Capacity l 1900

Starting Stress (on rim) kN 133


Exceeding the construction

limit profile

(Fiche 505-1)

- Does not exceed FS Profile



Length including

uncompressed buffers

mm 9,340

Gauge mm 1,435

Body width mm 3,050



speed

m 80

Mass and Speed

Real Mass t 41

Axle Mass t 20.5


manoeuvring

km/h 30


over IFN lines (unless more

restrictive conditions are set by the IM

or ECM)

km/h 60

Diameter of wheels, new/worn mm 920


composition

- YES

Brake

Braking mass P/G t 56/43

Braking mass with parking

brake

(by hand)

t 20

ALLEGATO 1 - SPECIFICHE TECNICHE

Documents

Transcript of ALLEGATO 1 - SPECIFICHE TECNICHE