all interiors - Asian Paints Ltd · PDF fileAsian Paints Acrylic Wall Putty or white cement...
Transcript of all interiors - Asian Paints Ltd · PDF fileAsian Paints Acrylic Wall Putty or white cement...
Finishes for Interior Walls
PRODUCT BENEFITS
BEST IN CLASS
HIGH
MEDIUM
LOW
PRODUCT CODE 0057
Tractor EmulsionAsian Paints Tractor Emulsion gives a smooth finish to the wall. A perfect buy if you have been using distemper till now.
1600+*
**Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.
*Currently available in more than 1600 shades as per the Asian Paints Colour Spectra.
* All Asian Paints products contain no added Lead, Mercury, Arsenic or Chromium
from April 2008.
On normal masonry surface after brushing
1 COAT
240-260 sq.ft/ltr**
2 COATS
120-140 sq.ft/ltr**
WASHABILITY COLOURS AVAILABLE COVERAGE
AVAILABLE PACKS FINISH
1 Ltrs 4 Ltrs 10 Ltrs 20 Ltrs
PAINT APPLICATION PROCESSPRE PAINTING STEPS
STEP 6SANDING
STEP 5 DECOPRIME CEMENT PRIMER (ST)BRUSH / SPRAY
STEP 4SANDING
STEP 3 ACRYLIC WALL PUTTYPUTTY KNIFE
STEP 2 DECOPRIME CEMENT PRIMER (ST)BRUSH / SPRAY
STEP 1 SANDING
STEP 7 FIRST COAT TRACTOR EMULSIONOPTIONALSTEP 8 SECOND COAT TRACTOR EMULSIONBRUSH / SPRAY
BRUSH 30 - 40SPRAY 20 - 25
N/A
BRUSH 30 - 40SPRAY 20 - 25
BRUSH 8 - 10SPRAY 15 - 20
BASED ONREQUIREMENT
BRUSH 8 - 10SPRAY 15 - 20
0359
1354
0359
BRUSH 25 - 35SPRAY 25 - 35
BRUSH 40 - 45SPRAY 50 - 600057
6 - 8 HRS
4 - 6 HRS
6 - 8 HRS
4 HRS
4 HRSBRUSH 25 - 35SPRAY 25 - 35
BRUSH 40 - 45SPRAY 50 - 600057
MTO*
WATER
MTO*
WATER
WATER
SAND THE SURFACE WITH EMERY PAPER 180 AND WIPE CLEAN
SAND THE SURFACE WITH EMERY PAPER 180 AND WIPE CLEAN
SAND THE SURFACE WITH EMERY PAPER 320 AND WIPE CLEAN
APPLICATION CODE DILUTION % APPLICATION VISCOSITY1
RECOATING PERIOD
THINNERPLASTER New masonary surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonary surfaces.
CLEANING Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness using Asian Paints DampBlock to limit further dampness. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Asian Paints Exterior Sealer (X1).
FILLING FOR CRACKS For filling cracks upto 3mm use Asian Paints Crack Seal.
FILLING FOR HOLES & DENTSIn case of dents and holes use Asian Paints Acrylic Wall Putty or white cement and fine sand in the ratio 1:3
Tractor Emulsion should not be applied on surfaces / substrates that are subjected to continuous seepage or dampness.
Shelf life: 3 years from date of manufacture in original tightlyclosed containers away from direct sunlight and excessiveheat.
1. As measured through a Ford cup.2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.* Mineral Turpentine Oil
A Smart UpgradeTractor Emulsion is the perfect way to make a smart upgrade from distempers. It offers the finish of plastic paint, at a cost that is not too different from distemper. How ? It has 1.5 times the coverage of distemper, so you need less material. It also lasts 1-2 years more, so you don’t have to paint that often.
Smooth finishTractor Emulsion offers your walls a smooth emulsion finish, making it the perfect value for money paint available.
WATER BASED
PRODUCT FEATURES
HOW TO APPLY
Refer to sheen levels in technical details
MATT
MATT HIGH GLOSSLOW SHEEN HIGH SHEEN
Finishes for Interior Walls
VOC CONTENT
Asian Paints Tractor Emulsion meets the LEEDS VOC criteria as per Indian Green Building Council version 1.0 as tested atShriram Institute for Industrial Research. Tested for Tractor Emulsion White (shade code 0908)
POST PAINTING CARE
For the best performance of the paint, ensure proper washing and cleaning of all algal and fungal growth, if any, at regular intervals of six months.
TECHNICAL DETAILS
a. Drying time: Surface dry time 30 minb. Sheen levels: 3 - 12 at 60 deg GHc. Flash point IS101/1987 Part 1, Sec 6: NAd. Stability of thinned paint: To be used within 24 hours
PRECAUTIONS
Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs of application.Do not over-thin or over-extend the brush.Tint using Asian Paints machine colourants onlyStir well and strain before use.Tinted paints need thorough shaking immediately after tinter addition as well as before use.
>
>>
>>
SAFETY FEATURES
Kindly refer to the MSDS for Asian Paints Tractor Emulsion which gives detailed information on safety measures while handling the paint. Store the container with the lid tightly closed in an upright position, in a cool, dry placeKeep out of reach of children and away from food, drinkMay be harmful if swallowed. In case of ingestion seek immediate medical attention.Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalationDo not pour leftover paint down the drain or in water courses.In the event of spills, contain spillage using sand or earth.Safety Data Sheet available for professional user on request.No added Lead, Mercury or Chromium compounds
>
>
>>>
>
>
>>
>>
ADDITIONAL INFORMATION
HOW TO CHOOSE COLOURS
Versio
n No
. VN
01/07/2012
Version No. VN01/07/2012. Please note that this datasheet supersedes all previous versions For Feedback/complaints, write to Marketing Manager Services Asian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, India
*These shades are for reference only. Please refer to the Colour Spectra or Colour Palette for correct shade reference
COLOUR SPECTRA FAN DECK* INTERIOR COLOUR COMBINATIONS GUIDE TRACTOR EMULSION SHADE CARD
Browse through Asian Paints colour tools to help you find the right colour combination
Finishes for Interior Walls
PRODUCT BENEFITS
PRODUCT CODE 0011
Premium EmulsionAsian Paints Premium Emulsion provides a rich and matt finish to the wall due to its super-acrylic quality.
1700+*
**Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.
*Currently available in more than 1700 shades as per the Asian Paints Colour Spectra.
On normal masonry surface after brushing
1 COAT
279.86 - 322.91 sq.ft/ltr**
2 COATS
150.69 - 172.22 sq.ft/ltr**
* All Asian Paints products contain no added Lead, Mercury, Arsenic or Chromium
from April 2008.
WATER BASED
WASHABILITY COLOURS AVAILABLE COVERAGE
AVAILABLE PACKS FINISH
1 Ltrs 4 Ltrs 10 Ltrs 20 Ltrs
PAINT APPLICATION PROCESSPRE PAINTING STEPS
STEP 6SANDING
STEP 5 DECOPRIME CEMENT PRIMER (ST)BRUSH / SPRAY
STEP 4SANDING
STEP 3 ACRYLIC WALL PUTTYPUTTY KNIFE
STEP 2 DECOPRIME CEMENT PRIMER (ST)BRUSH / SPRAY
STEP 1 SANDING
STEP 7 FIRST COAT PREMIUM EMULSIONOPTIONALSTEP 8 SECOND COAT PREMIUM EMULSIONBRUSH / SPRAY
BRUSH 30 - 40SPRAY 20 - 25
N/A
BRUSH 30 - 40SPRAY 20 - 25
BRUSH 8 - 10SPRAY 15 - 20
BASED ONREQUIREMENT
BRUSH 8 - 10SPRAY 15 - 20
0359
1354
0359
BRUSH 20 - 30SPRAY 20 - 25
BRUSH 60 - 70SPRAY 70 - 75011
6 - 8 HRS
4 - 6 HRS
6 - 8 HRS
3 - 4 HRS
3 - 4 HRSBRUSH 20 - 30SPRAY 20 - 25
BRUSH 60 - 70SPRAY 70 - 75011
MTO*
WATER
MTO*
WATER
WATER
SAND THE SURFACE WITH EMERY PAPER 180 AND WIPE CLEAN
SAND THE SURFACE WITH EMERY PAPER 180 AND WIPE CLEAN
SAND THE SURFACE WITH EMERY PAPER 320 AND WIPE CLEAN
APPLICATION CODE DILUTION % APPLICATION VISCOSITY1
RECOATING PERIOD
THINNERPLASTER New masonary surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonary surfaces.
CLEANING Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness using Asian Paints DampBlock to limit further dampness. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Asian Paints Exterior Sealer (X1).
FILLING FOR CRACKS For filling cracks upto 3mm use Asian Paints Crack Seal.
FILLING FOR HOLES & DENTSIn case of dents and holes use Asian Paints Acrylic Wall Putty or white cement and fine sand in the ratio 1:3
Premium Emulsion should not be applied on surfaces / substrates that are subjected to continuous seepage or dampness.
Shelf life: 3 years from date of manufacture in original tightlyclosed containers away from direct sunlight and excessiveheat.
1. As measured through a Ford cup.2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.* Mineral Turpentine Oil
Rich matt finishAsian Paints Premium Emulsion has a rich and smooth matt finish that oozes sophistication
Stain GuardPremium Emulsion has been fortified with Stain Guard technology that guards your walls against most household stains and ensures easy cleanability
Long lasting film Premium Emulsion has a long lasting film that keeps your house as good as new for a long time.
Fungus and mildew resistancePremium Emulsion is designed to protect your walls against unwanted fungus that can cause considerable damage.
Extra deep colours for feature wallsPremium Emulsion offers a unique range of extra deep colours that helps you highlight your home’s features better.
PRODUCT FEATURES
HOW TO APPLY
BEST IN CLASS
HIGH
MEDIUM
LOW
Refer to sheen levels in technical details
SMOOTH
MATT HIGH GLOSSLOW SHEEN HIGH SHEEN
Finishes for Interior Walls
Please note: that this datasheet supersedes any previous versions For Feedback/complaints, write to Marketing Manager Services Asian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, India
Browse through Asian Paints colour tools to help you find the right colour combination
COLOUR SPECTRA PRO DECK* INTERIOR COLOUR COMBINATIONS GUIDE PREMIUM EMULSION SHADE CARD ROYALE BOOK OF COLOURS
VOC CONTENT
Asian Paints Premium Emulsion meets the LEEDS VOC criteria as per Indian Green Building Council version 1.0 as tested at Shriram Institute for Industrial Research. Tested for Premium Emulsion White (shade code 0908)
POST PAINTING CARE
For the best performance of the paint, ensure proper washing and cleaning of all algal and fungal growth, if any, at regular intervals of six months.
TECHNICAL DETAILS
a. Drying time: Surface dry time 30 minb. Sheen levels: 3 - 12 at 60 deg GHc. Flash point IS101/1987 Part 1, Sec 6: NAd. Stability of thinned paint: To be used within 24 hours
PRECAUTIONS
Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs of application.Do not over-thin or over-extend the brush.Tint using Asian Paints machine colourants onlyStir well and strain before use.Tinted paints need thorough shaking immediately after tinter addition as well as before use.
>
>>
>>
SAFETY FEATURES
Kindly refer to the MSDS for Asian Paints Premium Emulsion which gives detailed information on safety measures while handling the paint. Store the container with the lid tightly closed in an upright position, in a cool, dry placeKeep out of reach of children and away from food, drinkMay be harmful if swallowed. In case of ingestion seek immediate medical attention.Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalationDo not pour leftover paint down the drain or in water courses.In the event of spills, contain spillage using sand or earth.Safety Data Sheet available for professional user on request.No added Lead, Mercury or Chromium compounds
>
>
>>>
>
>
>>
>>
ADDITIONAL INFORMATION
*These shades are for reference only. Please refer to the Colour Spectra or Colour Palette for correct shade reference
HOW TO CHOOSE COLOURS
Versio
n No
. VN
01/07/2012