All certifications zaes
-
Upload
zaes-sl -
Category
Engineering
-
view
204 -
download
0
Transcript of All certifications zaes
Ref: 23382Client Items
International Ltd
ISO 9001 : 2008Certificate Details:Prefix Title Suffix
This document certifies that the quality management systems of
have been assessed and approved by QMS International Ltd to thefollowing quality management systems, standards and guidelines:-
The approved quality management systems apply to the following:-
This Certificate remains valid while the holder maintains their management system in accordance with the published ISO standard. Tocheck the validity and status of this certificate please visit www.IRQAO.com or email [email protected]
This Certificate is the property of QMS International Ltd and must be returned in the event of cancellation.
Cert Text Top:
Cert Text Middle:
Cert Text Bottom:
Cert Footer:
QMS_Blank_3v8.pdfCert Info:
14126451
27/05/2002
14/07/2018
Certificate Number:
Original Approval:
Certificate Expiry:
15/07/2015Current Certificate:
METALÚRGICA ZAES, S.L.Client Name:
FABRICACION Y VENTA DE VALVULAS Y ACCESORIOS PARA LA INSTRUMENTACIONBusiness Description:
Client Certificate Details
Fixed Certificate Text
Toggle Caps
To Client Record
ISO 9001REGISTERED
This document certifies that the quality management systems of
METALÚRGICA ZAES, S.L.C/ Dolores Almeda, 12 , 08940 Cornellá de Llobregat (Barcelona),
have been assessed and approved by QMS International Ltd to thefollowing quality management systems, standards and guidelines:-
ISO 9001 : 2008The approved quality management systems apply to the following:-
FABRICACION Y VENTA DE VALVULAS Y ACCESORIOS PARA LA INSTRUMENTACION
Original Approval: 27 May 2002
Current Certificate: 15 July 2015
Certificate Expiry: 14 July 2018
Certificate Number: 14126451
On behalf of QMS International
This Certificate remains valid while the holdermaintains their management system in accordance with
the published ISO standard. To check the validity andstatus of this certificate please visit www.IRQAO.com or
email [email protected]
This Certificate is the property of QMS International Ltdand must be returned in the event of cancellation.
C/ Dolores Almeda, 12 , 08940 Cornellá de Llobregat (Barcelona),Client Address:
Refresh Cert
1Prod ID
This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document,which is retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.
Lloyd’s Register Verification Limited (Reg. no. 4929226) is a limited company registered in England and Wales. Registered office: 71 Fenchurch Street, London,
EC3M 4BS, UK. A subsidiary of Lloyd’s Register Group Limited.
Lloyd’s Register Group Limited, sus afiliadas y subsidiarias y sus respectivos funcionarios, empleados o agentes, en forma individual y conjunta, se denominan en esta cláusula “Lloyd’s Register.” Lloyd’s Register no asume ninguna responsabilidad y no será responsable ante ninguna persona por ninguna pérdida, daño o
gasto causado por confiar en la información o asesoría brindada en este documento o de cualquier otra forma, a menos que esa persona haya firmado un contrato con la entidad relevante de Lloyd’s Register para el suministro de esta información o asesoría, y en ese caso cualquier responsabilidad estará
exclusivamente de acuerdo con los términos y condiciones establecidos en dicho contrato. (En el caso de haber cualquier divergencia entre las dos versiones, la versión inglesa prevalecerá).
LRV/ECD/PED/D/June_2014/Rev.1
EC Certificado de Conformidad
Según los requisitos de la Directiva de Equipos a Presión 97/23/EC
El presente es para certificar que el Sistema de Gestión de Calidad de:
Metalúrgicas ZAES, S.L. C/ Dolores Almeda, 12
08940 Cornellá de Llobregat (Barcelona) España
Ha sido verificado en base a los requisitos del Anexo III, Módulo D de la Directiva de
Equipos a Presión 97/23/CE y es conforme a los requisitos para los productos que se
mencionan debajo:
Fabricación de Válvulas de Seguridad
Esta aprobación está supeditada al mantenimiento continuo del sistema de Calidad de
acuerdo a los requisitos de la Directiva mencionada y a la continuidad en el
cumplimiento con el/los Certificado(s) de Examen CE de Diseño y/o Tipo listados en el
Anexo Técnico adjunto.
Se concede autorización para el uso del número de Organismo Notificado de LRV de
acuerdo a los requisitos de la Directiva en relación a los productos arriba identificados.
Certificado No: 0038/PED/MAD/0113
Aprobación original: 31 de marzo de 2006
Certificado vigente: 30 de marzo de 2015
Caducidad del certificado: 1 de abril de 2018
LRV Organismo Notificado Número 0038
_____________________________________________
José Rivero en nombre de Lloyd's Register Verification LRV002.1.2013.12
A member of the Lloyd’s Register groupLloyd’s Register Verification Limited
José Rivero30 March 2015 Madrid Office
This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document,which is retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.
Lloyd’s Register Verification Limited (Reg. no. 4929226) is a limited company registered in England and Wales. Registered office: 71
Fenchurch Street, London, EC3M 4BS, UK. A subsidiary of Lloyd’s Register Group Limited.
Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as the 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person
for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any
responsibility or liability is exclusively on the terms and conditions set out in that contract.
LRV/ECD/PED/D/June_2014/Rev.1
EC Certificate of Conformity
In accordance with the requirements of the Pressure Equipment
Directive 97/23/EC
This is to certify that the Quality Management System of:
Metalúrgicas ZAES, S.L. C/ Dolores Almeda, 12
08940 Cornellá de Llobregat (Barcelona) Spain
has been assessed against the requirements of Annex III, Module D of the Pressure Equipment Directive 97/23/EC, and conforms to the requirements for the products
shown below:
Manufacture of Safety Valves
Approval is subject to the continued maintenance of the quality system in accordance with the requirements of the above Directive, and continuing to comply with the EC Design and/or EC Type Examination Certificate(s) as listed on the attached schedule.
Authorisation is hereby given to use the LRV Notified Body Identification Number in accordance with the requirements of the specified Directive in relation to the products
as identified above.
Certificate No: 0038/PED/MAD/0113
Original Approval: 31 March 2006
Current Certificate: 30 March 2015
Certificate Expiry: 1 April 2018
LRV Notified Body Number 0038
_____________________________________________
José Rivero on behalf of Lloyd's Register Verification LRV002.1.2013.12
A member of the Lloyd’s Register groupLloyd’s Register Verification Limited
José Rivero30 March 2015 Madrid Office
This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document,which is retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.
Lloyd’s Register Verification Limited, 71 Fenchurch Street London EC3M 4BS UK En esta cláusula, tanto individual como colectivamente, Lloyd’s Register, sus empresas filiales y sus respectivos directivos, sus empleados o agentes son llamados “Grupo Lloyd’s Register”. El Grupo Lloyd’s Register no asume ninguna responsabilidad ni estará obligado ante persona alguna por cualquier pérdida, daño o gasto causados por la confianza en la información o asesoría proporcionada en este documento o cualquier otro medio, a no ser que esa persona haya firmado un contrato con la entidad pertinente del Grupo Lloyd’s Register para la entrega de esta información o asesoramiento, en cuyo caso cualquier responsabilidad u obligación se aplicará exclusivamente en los términos y condiciones expuestos en ese contrato.
Certificado de Examen CE de Tipo El presente es para certificar que Lloyd's Register Verification, Organismo Notificado para la Directiva de Equipos a Presión 97/23/CE; realizó (de acuerdo al módulo B de la Directiva) un Examen CE de Tipo sobre el citado equipo a presión para asegurar su conformidad con los requisitos de la Directiva que le son de aplicación. El equipo identificado a continuación demostró cumplimiento.
Este certificado se emite a:
Solicitante: METALURGICA ZAES, S.L. c/ Dolores Almeda, 12 08940 Cornella de Llobregat (Barcelona)
Descripción del producto: Accesorio a presión Tipo de producto: Válvulas de seguridad. Escape conducido y libre Norma de diseño: UNE-EN ISO 4126-1:2004, ASME VIII Div.1 2010 Ad.2011 El Anexo Técnico adjunto detalla el contenido de la Documentación Técnica y Normativa Específica y formará parte de este certificado. "Este Certificado no es válido para equipos a presión cuyo diseño, características o parámetros de funcionamiento hayan sido variados con respecto a la muestra ensayada. El fabricante notificará a LRV de cualquier modificación o cambios al equipo con objeto de mantener la validez del certificado. “ "Este certificado tiene una validez de diez años desde la fecha de emisión" Certificado Nº: 0038/PED/MAD/2484 Aprobación Original: 12 de marzo de 2014 Certificado en Vigor: 12 de marzo de 2014 Caducidad del Certificado: 11 de marzo de 2024 LRV Organismo Notificado Nº 0038 ______________________________________________ José Rivero en nombre de Lloyd's Register Verification
LRV002.1.2013.12
A member of the Lloyd’s Register groupLloyd’s Register Verification Limited
José Rivero12 de marzo de 2014 Madrid Office
This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document,which is retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.
Lloyd’s Register Verification Limited, 71 Fenchurch Street London EC3M 4BS UK Lloyd's Register, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as the 'Lloyd's Register Group'. The Lloyd's Register Group assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register Group entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
EC Type Examination Certificate This is to certify that Lloyd's Register Verification, a Notified Body under the terms of: The Pressure Equipment Directive 97/23/EC; did (in accordance with Module B of the Directive) undertake an EC Type Examination on the stated pressure equipment to ensure its conformity with the requirements of the Directive which apply to it. The equipment identified below was shown to comply.
This certificate is issued to:
Applicant: METALURGICA ZAES, S.L. c/ Dolores Almeda, 12 08940 Cornella de Llobregat (Barcelona)
Product description: Pressure accessory Product type: Safety valves free and led exhaust Design standard: UNE-EN ISO 4126-1:2004, ASME VIII Div.1 2010 Ad.2011 The attached Schedule details the content of the Technical Documentation and Specified Standards and shall form part of this certificate. "This Certificate is not valid for pressure equipment, the design, ratings or operational parameters of which have been varied from the specimen tested. The manufacturer shall notify LRV of any modification or changes to the equipment in order to maintain a valid certificate." "This certificate is valid for ten years from the date of issue." Certificate No: 0038/PED/MAD/2484 Original Approval: 12 March 2014 Current Certificate: 12 March 2014 Certificate Expiry: 11 March 2024 LRV Notified Body Number 0038 ____________________________________________ José Rivero on behalf of Lloyd's Register Verification
LRV002.1.2013.12
A member of the Lloyd’s Register groupLloyd’s Register Verification Limited
José Rivero12 March 2014 Madrid Office