Alcon CT-88 Specification in PDF

Click here to load reader

Upload
shop-wifi-wireless-rf-technology
Category

Technology
view
44
download
3

Embed Size (px):

description

ALCON CT-88 Y phone line and intercom transfer system up to 70km NLOS Estimated range is result of our test and match real life performance: Range without line of sight is up to 70 km. Max Range in line of sight is up to 120 km. ALCON CT 88Y transfers your phone lend-line (PSTN), VoIP signal, Fax, GSM Signal, Dial up internet (18-28 kbps) or PBX extension up to 60 km away. Is our mid-range product, it has double the range than Alcon CT 7Y. Kit consists of a base unit, remote unit, 2 external antennas with mounting kits and cables and a touchtone phone. Base unit is setup on location where the telephone line is, and remote unit on the remote location, so you can use phone line on those two places. It is even possible to connect up to 4 remote units per base to transfer your line to 4 locations, and also have free intercom communication between the base and each remote unit. The remote units have two phone jacks where you can plug in phone, fax or computer modem, and you can use telephone line splitter to connect more units. Basic touchtone telephone is included in kits with the remote unit. ALCON CT- 88 Y are designed to operate on a low band VHF/UHF frequency 382 MHZ / 256 MHZ, with automatic multi channel scan for free channel and with high quality voice transmission. The low band frequency will bend with the terrain so optical visibility is not necessary. Signal will travel through hills and valleys, over mountains, even underground into a coal mine. Works on any analog line port (PBX, VOIP, PSTN, FXS or POTS) No software setup / easy installation The line of sight is not necessary for range Reliable and simple to use Up to 4 Remote Units or portable Handsets per one base 25 W Base unit 25 W Remote unit Universal interface for the remote unit/ mobile for fax / data or other telecom equipment use Up to 4 remote units or portable handsets on one base Intercom connection between base and remote or portable handsets Economical and easy to use Excellent signal quality for long range use RF stability & durability Scrambler function 40 channels frequency auto scan Two-way paging & intercom Remote and base units can operate by 12V car battery and it is easy to use with Solar panel + 12V battery without any problem. The standard power supply is 13.5V 13A Security: Multiple Channel Access: 40 channels automatic scan to avoid interference Built-in voice security circuit (Scrambler). Works on two frequencies in the same time : 382.100 MHz / 256.100 MHz

Transcript of Alcon CT-88 Specification in PDF

Page 1: Alcon CT-88 Specification in PDF

ALCON CT 88 - Features

● Point to Point or Point to mobile use ● High performance ● Universal interface on the remote / mobile for fax / data or other telecom equipment use ● Economical and easy to use ● Excellent signal quality for long range use ● RF stability & durability ● Scrambler function ● 40 channels frequency auto scan ● Two-way paging & intercom ● Modular design

Receiver

Mob / Rem Unit Base Unit

Sensitivity 12dBi Sinad -125dBM -125dBM

Frequency Range 382.100MHZ 256.100MHZ

Audio Distortion <5% <5%

Image/Harmonic -70db -70db

Adjacent Channel Rejection -70db -70db

Spurious -70db -70db

Power Scuice

AC: 100V / 60Hz

AC: 220V / 50Hz

Output: DC 13.6V / 8A