ALCD2257 User Manual

7/30/2019 ALCD2257 User Manual

1/22

55CM LCDHDTVwithHDTUNER

Instruction ManualModel Number ALCD2257

After Sales Support TEL: 1300 366 144 WEB: [email protected]


2/22

What your 1 year warranty means

Great care has gone into the manufacture of this product and it should thereforeprovide you with years of good service when used properly. In the event of product

failure within its intended use over the course of the first 1 years after the date of

purchase, we will remedy the problem as quickly as possible once it has been brought

to our attention. In the unlikely event of such an occurrence, or if you require any

information about the product please contact us via our after sales support services,

details of which can be found in this manual and on the product itself.


ALCD2257, 55cm LCD HDTV 1


3/22

C

All products brought to you by are manufa ctured to the highes t standa rds of performance and safety, and,as part of our philosophy of customer Serv ice and satisfac tion, are backed by our comprehensive 1 yearwarrant y. We hope you will enjoy using your purchase for many years to come.

ongratulations on choosing to buy a product.

Thanks for choosing product

Index

General Information and Safety Instructions

Assembly and Parts List..............................................4

Getting Started..............................................................5

.......3

Selecting a location for the TV..........................5Learning about your TV.....................................5

Connecting Your TV...........................................6

Preparing the remote control .......................10

Learning the remote control...........................11

..............................12

..............................12

......................................12

..........................................12

..............................13

............................13

...............................13

...............................13

Turning yo ur TV on and off

Selecting the video source

Adjusting the volume

Changing channels

Displaying channel lists...................................12

Selectin g the sound mode

Selectin g the picture mode

Selectin g the aspect ratio

Selectin g the audio mode

Freezing a picture

Setting the sleep timer

Using the on-screen display (OSD) .......................14

Use the TV Features

Adjusting the SOUND Menu

Adjusting the PICTURE Menu

Adjusting the CHANNEL Menu

Adjusting the OPTION Menu

Adjusting the LOCK Menu

Adjusting the SCREEN Menu

...........................................................................20

....................................................13

...........................................13

.................................13

...............................14.........................14

...........................................................14

..................................14

................................15

..............................15

.................................17

......................................18

..................................19

.................................................................19

Appendix..

Cleaning and care...................................................20

Troubleshoot ing.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .20

Specifications..........................................................21

Display channel information

Selecting Subtitle LanguagesSelecting your favorite programs

PC Setting


Features:


4/22

General Information and Safety Instructions

FIRE AND SHOCK PRECAUTIONS

unit free from foreign objects, such a s hairpins, nails, p aper, etc. Do not put the set into a bookcas e or

other enclosures in which it would be poorly ventilated. Do not place it on carpet or a bed as low

ventilation holes could become obstructed.

Do not set liquids, including flower vas es and vessels filled wit h chemicals or water etc, on top of the unit

as liquid could get inside the unit. If a hazardous object falls inside the TV set, unplug immediate ly and

call 1300 366 144 for further instruction. When placing or moving the TV set, take care to insure that the

power cord is disconnected.

To avoid damage to the power cord, never allow heavy objects s uch as the TV set itself to be placed on the

power cord. Keep cord away from radiating appliances. Do not allow cord to become kn otted or tangled.

Do not lengthen the cord. When removing the power plug from the sock et, always hold onto the plug,

never pull by the cord.

This TV set must be connected to a mains power outlet with a protective ea rt h connection.

The mains power outlet should remain readily accessible after installat ion.

Naked flamed so urces, such as lighted candles are never to be p laced on or around the TV.

A minimum distance around the TV for sufficient ventilation. (150mm recommended minim um)

WARNING

Do not remove the back cover of the TV set. Accidental contact with high voltage compo nents could

result in electric shock.

If your set emits smok e or produces a strange sound or sm ell, immediately turn off your TV.

During vacation or other occas ions when you will not be using the set for an ex tended period, remove the

power plug from the socket.

IMPORTANT INFORMATION

If a television is not positioned in a sufficiently stable location, it can be potentia lly hazardous due to falling.

Many injuries, particula rly to children, can be avoided by taking simple precautions such as:

Only using furniture that can safely support th e television.

Ensuring the television is not overhanging the edge of the supportin g furniture.Not placing the television on tall furniture (for example, cupboards or bookcas es) without anchoring both

the furniture and the television to a suitable suppor t.

Not standing the televisions on cloth or other materia ls placed between the television and suppor ting

furniture.

Educating children about the dangers of climbing on furniture to reach the television or its controls.

If a problem occured, and you do not know how to solve it, please do not hesitate to contact After Sales

Support Center to repair or replace the product and not return the product to the store.

Adequate ventilation must be provided to prevent heat build up inside the unit. Keep the inside of the




5/22

Installing the Stand

1. Place the TV faced down on a soft cloth or cushion on a table.

2. Attach the stand to the TV set as shown in the picture.

Assembly and Parts List

Accessories list

Manual Book Quick Setup Guide Remote

Batteries Power Cord Warranty Statement Warranty Card

WarrantyDetails

AAA

AAA


4 ALCD2257, 55cm LCD HDTV

55CM LC DHDTVwi thHD TUNER

InstructionManualModelNumberALCD2257

AfterSales Support TEL:1300 366 144 WEB:[email protected]

55CM LCDHDTVwith HDTUNER

Quick Set-upGuid eEasy steps to gettingstarted

ModelNumberALCD2257

ALCD102


6/22

Getting Started



Selecting a location for the TV

1. Place the TV on a sturdy platform (away from direct sunlight for optimal vi ewing).

2. Place the TV far enough from the walls to allow proper ventilat ion. Inadequate venti lation may causeoverheating which may damage the TV.(150mmminimumrecommendeddistancearoundcoveredenclosure)

Note: Please contact retail dealer for wall mounting.

Learning about your TV You can operate your TV by using the buttons on the front panel or on the remote control. The terminals on

the backside provide all th e connections you will need to connec t other equipment to your TV.

Front panel

NO. Component Component Description

1 POWER Switc h Press to turn the main power ON or OFF.

2 POWER Indicator

3 Remote sensor Receives signals from the remote control. Do not block.

4 (power standby ) button Press to turn your TV on or off (standby mode).

5 CH button Press to change the channel up.

6 CH button Press to change the channel down.

7 VOL button Press to decrease the volume.

8 VOL button Press to increase the volume.

9 SOURCE button Press to select the signal source for your TV.

10 MENU button Press to activate the on-screen display (OSD).

Red indicates stan dby mode. Blue shows that the unit is on.

There will be no light when the power switch is in the off positi on.

(NOTE: POWER Button switch location on bottom of front cabinet.)


7/22


Getting Started


L R

VIDEO

Back Connections

NOTE: appearance.The above picture is for reference only, please refer to the actual TV to determine their

Model:ALCD3257

NO. Connector Description

1 AC INPUT Connect the power cord to this connector.

Plug headphone into this jack. When headphones are plugged in, no sound2 Headphone jack

comes from the loudspeakers.

3 Component input Connect Component devices, such as a DVD player / PVR / HDDVD

/BluRay to these jacks. (Recommended for superior picture quality)

4 A/V input/output Connect standard video/audio cables to these jacks.

Connect an S-Video device to this jack, inserting the left and right audio leads5 S-Video

into S-VIDEO/L and S-VIDEO/R

6 Antenna input Connection for the Aerial/Antenna.

7 USB Connector For service purposes ONLY. (Will not support consumer products)

8 HDMI Connect an HDMI device to this jack.

9 VGA Audio input Connect audio from a computer to this jack.

10 VGA Video input Connect the video from a computer to this jack.

11 Optical audio output Connect an optical audio device to this jack.(only available in Digital TV or HDMI modes)

12 Rating Label Model number and serial number found here

VGAVGA AUDIOHDMI

COMP INY PB PR

L R

HEADPHON

E

OPTICAL

L

R

VIDEO

4

4

S-VIDEO


8/22

Connecting your TV

Getting Started


Y

PB/CB

PR/CR

AudioL

Audio

R

Red

Red

White

Blue

Green

Devices WithComponent output jacks

Audio L

Video

Audio RRed

White

Yellow

Audio/Videooutput devices

Audio/Video

Intput Devices

S-VIDEO

AudioL

Vid

eo

AudioR

Red

White

Yellow

2

2


Whenever you connect an audio system to your set ensure that all elements are switched off.When connecting an external device, match the color of the connection terminal to the cable.NOTE: colors for inputs and cables must correspond on both devices.

L R

VID EOVGAVGA AUDIOHDMI

COMP INY PB PR

L R

S-VIDEO

HEADPHONE

OPTICAL

L

R

VIDEO

VGA

Computer

Devices WithHDMIoutput jacks


9/22

Getting Started



Connecting an Aerial (For analogue and Digital signals)

To view tel evis ion channels correctly, a s ignal must be received by the set from the fol lowing source :

-An outdoor VHF/UHF antenna

Connecting External A/V Devices

-Connect a Video RCA or S-VIDEO cable to an a ppropriate extern al A/V device such as a VCR, DVD or

Camcorder.

- Connect RCA audio cables to R -AUDIO - L and Video/S-Video on the rear of your set and the other ends

to corresponding audio and Video/S-Video out connectors on the A/V device.

Connecting Component Devices (DVD/PVR)-Connect Component vide o and audio cables to Component inputs (PR/C R, PB/C B, Y) on the rear of your

set and the other ends to corresponding component video out connectors on the PVR or DVD.

-The Y, PB/C B and PR/C R connectors on your component devices (PVR or DVD) are sometimes labeled Y, B-Y

and R-Y or Y, CB and CR. (Colors for inputs and cables must correspond on both devices.)

NOTE: Some devices such as a P VR or DVD player require a Component/YPBPRsignal to be set to output

in the devicessettings - please consult your device user manual for instruction s.

Connecting HDMI

-Support s digital connections between HDMI - enabled AV devices such as (PVRs, DVD, BluRay, HDDVD,

AV receivers and digital devices.).

-No sound connection is needed for HDMI to HDMI connection.

NOTE: Some devices such as a PVR or DVD players require a HDMI signal to be set to output in the device's

settings.

- Pleaseconsult your device user manual for instructions.

What is HDMI?

- HDMI, or high-definition multimedia interface, is a next-generation inter face that enables the

transmiss ion of digital audio and video signals using a single cable without compression.

-Multimedia inter face is a more accurate name for it especia lly because it allows multiple cha nnels of

digital audio (5.1 channels).The difference between HDMI and DVI is that the HDMI device is smaller in

size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and support s

multi - channel digital audio.

-Use the HDMI termina l for HDMI connection to a compatible dev ice. If your external device has D VI only,

you should use a DVI-to-HDMI cable (or adapter) for the connection, and the R -AUDIO - L terminal on

DVI for sound output.


10/22

Getting Started



-Connect the D- Sub cable to VGA on the rear of your set and the other end to the Video Card of your

computer.

-Connect the stereo audio cable to VG A AUDIO on the rear of your set and the other end to Audio Out

of the sound card on your computer.

-This device may not be compatible with all PC video/graph ic cards.

Connecting AUDIO

-Connect RCA audio cables to R -AUDIO - L on the rear of your set and the other ends to corresponding

audio in connectors on the Am plifier or DVD Home Theater.

Connecting USB Connector Devices

For service only.

Optical Audio

Connect an optical audio device to this jack (Toslink optical cable is needed). Note: DTV and HDMI

output only.

Headphone

Headphones can be connected to the headphone output ( ) on the side of your set. (While the

headphone is connected, the sound from the built-in spea kers will be disabled. )

Connecting a Computer


11/22

Preparing the remote controlInstallin g the remote control batteries

1 Open the battery cover on the back of the remote control.

2 Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery compartment.3 Close the battery cover.

Note: 1 Dispose of your batteries in a designated disposal area. Do not throw the batteries into fire.

2 Do not mix battery types or combine used batteries with new ones.

3 Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment.

4 If you do not intend to use the remote control for a long time, remove the batteries.

5 The effective range of remote control is suggested in the figure below.

Remote control range

The following graphic shows the range of the remote control.

Getting Started

AAA

AAA




12/22

Learning the remote control

Note: 1 Please refer to the practica lity.2 The marks beyond some buttons indicate its different use in different modes.3 Red/Green/Yellow/Blue buttons are used for special function. The color of buttons mentioned above

must reference the actual color of the remote control buttons

Getting Started

ALCD102

On/Off(Standby)

Picture mode

Sound mode

For direct channel access

Display the current program information

Next channel/up button

Volume decrease/Left button

Enter button

Display the main menu/Back menu displayMute the sound

EXIT all menu display

Electronic Program Guide

Select AV Signal

Select Component Signal

Remote sensing Window

Power Indicator

Available source selection

Digital/Analog TV

Zoom image button

The four color button for special

To return to the last view program

Volume increase/Right button

Previous channel/down button

Set the sleep timeFreeze picture

Select the sound output(Effective in Analog only)

Fast access to your saved favorite programs

Select the HDMI signal

Select the VGA signal




13/22

Turning your TV on and off

To turn your TV on:

[CH/CH]

Connect the TV to an AC power

outlet and turn on the power switch located

below the front right hand side of unit. Thepower indicator will initiall y be red and then will

change to blue. A few seconds later an image

will appear on the screen.

Turning off to standby mode : Press [ ] on the front

panel or on the remote control to switch to

standby mode. You can activate the unit agai n

by pressing [ ] .

Power indicator: Red indicates standby mode. Blue

shows that the unit is on.Th ere will be no light

when the power switch is in the off position .

Notes:Turn the power switch off when you do not intend

to use the TV for long periods, for example

overnight. Remove the connection from the wall

power outlet if you do not in tend to use the unit for

longer periods, for example if you plan to be away a

few days. Wait at least 5 seconds af ter turning off if

you want to re-start the TV.

OK]

Selecting the video source

Selecting the video source depending on the video

device you have connecte d to your TV, you can

select DTV, ATV, AV, S-Video, Component, VGA,

and HDMI as the video source.

To select the vid eo source:

Press [Source] . When the list of video sources

appears, Press to select the source,

then Press [ to enter.

OKEXIT

Input Source

DTV

ATVAVS-Video

ComponentVGAHDMI

7

OKEXIT

Channel List

11 DT65 480p12 DT65 720p13 DT65 480p1 TV12 BBC13 S-014 S-025 C-426 S-047 C-02

DTV

DTV

DTV

TV

TV

TV

TV

TV

TV

TV

S-12

TVPAL BGMono

10

Adjusting the volume

To adjust the volume:

Press to increase or decrease

the volume.Press [Mute] to turn the sound off. Press

[Mute] again to turn the sound back on.

Changing channels

To change chann els:

Press to go to the next higher or

lower channel.

Or, Press the number buttons to select a

channel. For example, to select channel 120,

press 1, then 2, then 0.

Or, press [Recall] to go to the last viewed

channel.

Displaying channel lists

To display channe l lists

1 Press [OK] to display the channel list.

2 Press to select the channels.

3 Press [OK] to enter the channels.

4 Press [Exit] to exit the menu.

[VOL/VOL]

[CH/CH]

[CH/CH]

Getting Started Getting Started




14/22

Freezing a picture

To freeze a pictu re:

Press [Still] repeatedly to access or quit

Freeze.

Setting the sleep timer

You can specify the amount of time you wan t your

TV to wait before it automat ica lly turns of f.

To set the sleep time r:

Press [Sleep] one or more times until the

remaining time you want app ears. You can

select Off, 10 minutes, 20 minutes, 30

minutes, 60 minutes, 90 minutes, 120

minutes, 180 min utes or 240 minutes. You can

also setup sleep timer in the time submen u.

Display channel information

To display channel informati on

Press [Inform] to view current channel

information in TV source.

Press [EPG] to view channel information in

DTV mode.

The re are Inform, Sched ule, DATE and

Reminder items, you can look or set them.

Press the Inform button to enter Inform

menu.

Press the GREEN button to enter SCHEDULE

LIST.

Press the Yellow button to enter DATE menu.

Press the BLUE button to enter Reminder

menu. Once a reminder is set, it will appear in

the SCHEDULE list.

EXIT

Sound Mode

OK

StandardMusicMovieSportsUser

EXIT

PICTURE MODE

DynamicStandard

MildUser

OK

4:3

OKEXIT

Audio Langua ges

EnglishDOLBY

Freeze : Off

Sleep Timer: 120min

No Information 12:02576i

ReminderDATESchedule OKInformEXIT

01 Jul 2008 14:00PROGRAM GUIDE

01 Jul

14:00 15:00

DTV 11 Dt65 480p14:00-17:00 Dt65 480p

DT65 480p

DT65 720p

DT65 480p

DTV

12 DT65 720p

13 DT65 480p

11 DT65 480p

S-12

TVPAL BGMono

10

Selecting the sound mode

To select the sou nd mode:

Press [Sound] to call up sound mode menu

and press to select the soundmode and press [OK] to confirm. That you can

select Standard, Music, Movie, Sports and User

(a mode that you defined) mode.

Selecting the picture modeTo select a pic ture mode:

Press [Picture] to call up picture mode menu

and press to select the picture

mode and press [OK] to confirm. You can select

Dynamic, Standard, Mil d and User (a mode

that you defined) mode.

Selecting the aspect ratio

To select the aspec t ratio:

Press [Zoom] one or more times to select the

aspect ratio you wan t. You can select Au to, 4:3,

16:9, Zoom1 and Zoom2.

Selecti ng the audio mode in DTV

To select the au dio mode:Press [I/II] to call up the audio languages menu

and press to select the audio

mode.

[CH/CH]

[CH/CH]

[VOL/VOL]

Getting Started Getting Started




15/22

Adjusting the SOUND MENU

To adjust the Soun d MENU:

1 Press [MENU] to open the main menu.

2 Press to select SOUND, andthen press to enter the SOUND

menu.

3 Press to highlight an option,

then press to adjust the

option.

You can adjust:

Balance Adjusts the volume from the left

and right speakers.

Treble

Auto Volume Turns automatic volume

control on or off. The option keeps the

audio in a preset range to eliminate large

spikes in volume.


[VOL

/VOL

]CH

[CH/CH]

[VOL/VOL]

Adjusts the treble (high-pitch

sounds).

Bass Adjusts the bass (low-pitch sounds).

Surround Sound Turns the surround

sound effect on or off.

SpdifEnable and disable the SPDIF

output .

[ /OK]

Balance R10

Treble 50

Bass 50

Auto Volume Off

Surround Sound Off

Spdif Off

EXIT MENU OK

SOUND

Aut o Tuning

DTV Manual TuningATV Man ual Tuni ngProgram Edit

EXIT MENU OK

CHANNEL

EXIT OK

Favorite List


DTV

DTV

DTV

TV

TV

TV

TV

TV

TV

TV

Selecting your favorite programs

To select your favorite pr ograms

Press [Fav] to display the favorite channel list

you have saved.

1 Press [CH/CH] to select you favorite

channels.

2 Press [OK] to confirm.

3 Press [Exit] to exit.

Note: Channels must be added vi a program edit ,

before they will appear in the favorite list.

[VOL/VOL]

CH/

[CH/CH]

[VOL/VOL]

[CH/CH]

[VOL/VOL]

Using the on-screen display (OSD)

Your TV has a n on-screen dis play (OSD) that you can

use to change setti ngs for your TV.

To use the OSD:

1 Press [MENU] to open the main menu.

2 Press to select a menu option

on the left, then press to enter themenu or item.

3 Press to select an item, then press

to adjust the value or enter a

submenu.

4 In the submenu, you can press to

select the item and press to

adjust the value.


[ OK]

Getting Started Use the TV Features




16/22

Aut o Tuni ng

DTV Manual TuningATV Ma nual Tun ingProgram Edit

EXIT MENU OK

CHANNEL

MENUEXIT

Channel Tuning

0%... 57.75MHz TV

TV : 1 Programs

DTV : 0 Programs

Radio : 0 Programs

Press to Skip.

Press to Exit.

Adjusting the PICTURE menu

To adjust the pic ture:

1 Press [Menu] to open the main menu.

2 Press to select PICTURE menu.

3 Press to highlight an option, then

press to adjust the option. You

can adjust:

Brightness Increases the brightness to

add more light to dark areas of the picture.

Decreases the brightnes s to add more dark

to light areas of the picture.

Contrast Increases the picture level to

adjust the white areas of the pictu re.

Decreases the picture level to adjust the

black areas of the picture.Color Adjusts the intensity of the colors.

Sharpness Increases the sharpness level

to show cleaner and clearer images.

Decreases the level to show a smoother

picture.

Tint - change the picture quality when

there is a NTSC signal at AV/S-video source.

Color TemperatureChanges the color

temperature. You can sel ect Cool, Cool er,

Warm, Warmer, Medium.

4 If you press to select the

Enhanced Setting option, then press [OK] to

enter. You can select Film Mode or Noise

Reduction; press [VOL/VOL] to adjust

the option.

Enhanced SettingAccesses advanced

video settings such as: Film Mode To

select Film mode: On or Of f. Noise

ReductionReduces video noise in moving

images without blurring the picture.

5 To exit press [Exit].

[VOL

/VOL

]

[CH/CH]

[VOL/VOL]

[CH/CH]

Adjusting the CHANNEL Menu


2 Press to select CHANNEL.

Press to select

ress to

v

Press to select

then press to

[VOL/VOL]

Auto Tuning

Thi s is the easies t and most ef fective way to

install all channel s available in your area

automatically.

[CH/CH]

Tuning

[CH/CH]

Tuning menu.

-In both the Analog and Digital signal source.

Auto Tuning.

P [OK] start an automatic search, and

this will memorize all the available

channels.

Auto Tuning will take a few minutes;

please wait until it has finished.

DTV Manual

-in Digital signal source

Digital channel numbers are different to the

existing analog channel numbers; please

contact the broadcas ter in your state for the

correct number.

the DTV Manual

Tuning, [OK] enter DTV

Manual

Use the TV FeaturesUse the TV Features

Brightness 50

Contrast 50

Color 50

Sharpness 50

Tint 0

Color Temperature Medium

Enhanced Setting

EXIT MENU OK

PICTURE

Contrast 50




17/22

SAVEEXIT

ATV Manual Tuning

Storage to 8

System BG

Current CH 8

Search

Fine Tune

Skip

Frequency 336.50MHz

DELETE SKIPMOVERENRME FAV

Program Edit


DTV

DTV

DTV

TV

TV

TV

TV

TV

TV

TV

SKIP

MENUOKEXIT

DTV Manual Tuning

UHF CH 49

Please select channel then

Press OK to search

DTV 3

Radio 0

Bad Nomal Good

to select a channel then

press [OK] to search.

ATV Manual

-In Analog signal source

Manual Instal l is only needed when analogue

channels are not found under an automatic tune.

ATV Manual ,

[OK] enter ATV Manual

to select a channel.

begin tuning.

Press the red button to save the channel.

NOTE: System setting for Australia is BG.

Fine tuning channels

Under poor reception conditions, or when receiving

analogue signals from distant TV stations, the

picture quali ty might be improved by using the Fine

Tune option in the ATV Manual submenu.

Select Fine Tune and to adjust the image

using . (App licabl e for Anal ogu e

transmission only)

Press

Press to select

then press to

Press

Press to select Search then press

to

[VOL/VOL]

Tuning

[CH/CH] Tuning

Tuning

menu.

[VOL/VOL]

[CH/CH]

[VOL/VOL]

Tuning

[VOL/VOL]

Editing channels from memory

After you scan for channels, you can delete a

channel from memory if you want to skip the

channel when you press . You can

still select the skipped channel s using the

number buttons. You can also rename the

channels, lock or unlock the channel s from

memory.


2 Press to select the Channel

menu.

3 Press to highlight Program

Edit, press to enter Program Edit.

4 Press to select the channel you

want to edit,

Delete channels: choose the Red button to delete the channels you have

selected, once toselect and twice to

delete.

Rename channels: choose the Green

button and by using

to rename the channels

names you have selected.

Move channels: choose the Yellow

button and press to Move

the channels to another position you

have selected, press [Menu] tofinalizethe MOVE.

NOTE: "RENAME" and "MOVE" are for

ATV channels only.

Skip channels: choose the blue button

to Skip the channels you have selected.

FAV channels: choose the FAV button to

add the channels you have selected to

the favorite list.

5 Press [Menu] to exit the menu.

[CH/CH]

[VOL/VOL]

[CH/CH]

[CH/CH]

[VOL/VOL]

[CH/CH]

[CH/CH]

[OK]

and





18/22

Repeat Off

Hour 00

Minute 00

OK

Act iva te Mon~Sat

Hour 0

Minute 00

Volume 30

Mode DTV

OK

Clock 01/Jul 1 2:00

Off Time Off

On Time Off

Sleep Timer

Time Zone Victoria GMT+10

EXIT MENU OK

OPTION

Language English

Blue Screen Off

Osd Settings

Time

Restore Factory Default

EXIT MENU OK

OPTION

Adjusting the OPTION Menu


2 Press to select OPTION , then

press to enter the OPTION menu.

In the Option OSD, you can set the following items:

Blue Screen - Press to turn on

or turn off the Bl ue Screen effect by selec t On

or Off. (Onlyavailable for ATV)

Osd Settings - itcontains Transparency and

OSD Timeout, when you select Osd Settings,

press [OK] to enter, you can set their values by

using .

vTransparency : you can adjust the Osd

transparency from 0-6.

vOsd Timeout: The time it takes the OSD to

disappear when no operations are

performed. You can change it from 5

seconds, 10 seconds, 15seconds,

20seconds, 25seconds, 30seconds,

35seconds, 40seconds, 45seconds,

50seconds, 55seconds and 60seconds.

Time - Press to select Time in the

Option Osd, and press [OK] to enter.It contains

Clock, Off Time, On Time, Sleep Timer and

Time Zone.

[VOL/VOL]

[OK]

[ ]

VOL/VOL

[VOL/VOL]

[CH/CH]

Clock - display date and time.

Off Time

1 Press to select Off Time, and

press [OK] to enter.

2 Press to select Repeat, Hour

or Minute, and use to set

the Off time. Press [Menu] to exit.

On Time

1 Press to select On Time, and

press [OK] to enter.2 Press to select Activate ,

Hour or Minute, and use

to set On time.

3 Press [Menu] to exit.

Sleep Timer - Press to set the

sleep timer between 0-240minutes.

Time Zone - Press to set a time

zone corresponding to your region.

Restore Factory Default

Select RestoreFactory Default and press [OK],

you will be asked via the OSD to confirm your

selection. Press [OK] and your TV will be reset to

factory settings.

Note: Password and parental options are NOT

reset.

[CH/CH]

[CH/CH]

[VOL/VOL]

CH/CH

CH/CH

[VOL/VOL]

[VOL/VOL]

[VOL/VOL]

[ ]

[ ]





19/22

Child Lock Off

Set Password

Block Program

Parental Guidance Block PG and above

EXIT MENU OK

LOCK

Please enter password

New _ _ _ _Confirm _ _ _ _

EXIT OKMENULOCK

Block Program


DTV

DTV

DTV

TV

TV

TV

TV

TV

TV

TV

Adjusting the LOCK Menu


2 Press to select LOCK, then press

[CH /OK] to enter the LOCK menu.

3 Input a password to enter the LOCK menu.

4 Press to select its items, it contains:

ChildLock, Set Password, Block Program, and

Parental Guidance .

Child Lock -

Set Password - to set or change pas sword.

vFirst input a new password.

vSecond input the new password again.

Note: Please store your new password in a safe

place.

Block Program -The MENU below wil l be

displayedlisting your available channels. Select

the channelto block and push the GREEN

button to block it.

[VOL/VOL]

[CH/CH]

VOL [VOL

If Chil d Lock is set to on, most of

the remote and the panel buttons are invalid

except [POWER] , [VOL ], [VOL ], and [MENU]

on the right side of the front panel and [POWER] ,

[ ], ], [Menu] and [NUMBER] etc. on

the remote control. Press [Menu] to display themain menu, only Lock Settings can be selected

and adjusted by entering your password,

[NUMBER] are used for entering a password.

NOTE: The factory initial pa ssword is 0000.

Your password will be required to view the lock ed

channel.

Parental Guidance

Classif ies the programs into the following:vNo Block - No programs are blocked.

vBlock R and above - All classified programs

are blocked.

vBlock AV and above - Adult audiences,

strong violence, 15 years and older.

vBlock MA and above - Mature audiences

only, 15 years and older.

vBlock M and above - Mature audiences only,

parental guidance strongly advised.

vBlock PG and above - Parental guidance

recommended.vBlock G and above - General audiences.

vBlock all - All classified programs are

blocked.

Note: If there is no classificat ion broadcast, the

program will not be blocked. , setting volume as

min volume that you set, etc.





20/22

Image Position

H Size 50

V Siz e 50

Size 0

Phase 10

Auto Adj ust

EXIT MENU OK

SCREEN

OK

0

EXIT

SCREEN

Adjusting the Screen Menu


2 Press to select Screen, then press

to enter the Screen menu.

[VOL/VOL]

[CH /OK]

Image Position - Adjust the image position.

H Size - Adjust the horizontal size of the image.

V Size - Adjust the vertical size of the image.

Clock- Adjust the VGA Clock to match the PC

clock. (VGA mode only)

Phase - Adjust the VGA phase to match the PC.

(VGA mode only)

Auto Adjust - Auto adjust the VGA image

position. (VGA mode only)

PC Setting

Set the PC Software proper ly to match one of the

below options.

Supported VGA Modes:

Note: Your PC/Notebook may n ot be able to

display some of these resolutions.

Take Windows XP as an exampl e, and the Windows

system display setting is as illustrated:

1 Right click anywhere on your display, select

'Properties'.2 Find the Settings tab on the dialogu e box, set the

screen Resolution.

3 See above details about the resolutions

supported by this unit.

4 Click OK to exit.

VGA____ (640480 60Hz)

SVGA___ (800600 60Hz)

XGA____ (102476 8 60Hz)

SXGA___ (12801024 60Hz)





21/22

Cleaning and care

WARNING: Do not try to remove the cabinet back. Refer servicing to qualified service technicians.To clean the TV screen:

1. Unplug the TV to avoid possible shock hazard.

2. Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm

water to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet can

cause damage to the TV.

3. Wipe off any excess moisture with a clean dry cloth.

Caution: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.

These chemicals can damage the f inish of the cabinet. Before ca ll ing a service technician, please check the

following table for a possible cause of the problem and some solutions.

TroubleshootingBefore calling a service technicia n, please check the following table for a possible cause of the problem and some solutions.

SymptomsTV will not turn on

No picture, no sound

No sound, picture OK

Poor sound, picture OK

Poor picture, sound OK,

picturebreaksupindigitalmode,

Unable to select a certain channel

Poor color or no color

The remote control does not operate

Disorder display at power on

Asking for a Password

Possible SolutionsMake sure the power cord is plugged in, then press [Power].(Bottom of the unit)

The remote control batteries may be dead. Replace the batteries.

Check if you have set the off timer.Check the antenna/cable connections.

Press [Display] to see if you have selected the right signal. source.

The sound may be muted. Press [Mute] on the remote control.The station may have broadcast difficulties. Try another channel.

Check the speakers cable connections.

The station may have broadcast difficulties. Try another channel.

Check the speakers cable connections.

Check the antenna connections.The station may have broadcast difficulties. Try another channel.Adjust the picture from the menu, the Antenna may need to be adjusted orreplaced.

The channel may be skipped.

The station may have broadcast difficulties. Try another channel.Adjust the HUE and color in the menu.

There may be an obstruction between the remote control and the remotecontrol sensor.

The batteries may be installed incorrectly.The remote control batteries may be dead. Replace the batteries.

This may be caused by too short interval between power off and on.

Unplug the power wait 5 minutes and restart.

Key in "0000

Appendix




22/22

Model ALCD2257

Diagonal display size 22 inches

Resolution 1366X768 Pixels

Television system PAL B/G DVB-T

Color system PAL/NTSC

Channel coverage VHF-L: 48.25 to 168.25MHz

VHF-H: 175 .25 to 463.25MHz

UHF: 471.25 to 863.25MHz

PC mode VGA____ (640480 60Hz)

SVGA___ (800600 60Hz)

XGA____ (1024768 60Hz)

SXGA___ (12801024 60Hz)

Y PB PR mode 480I/60Hz,480P/60Hz,576I/50H z,576P/50Hz,720P/60Hz,

1080I/50Hz, 1080I/60Hz

Power source AC 220-240V

Power consumption W

Audio output 2W+2W

Connections ANT input: Cable/antenna (1)

Video input:

Video (1)

S-Video (1)

Component (1)

Video output: Video (1)

VGA input: Analog RGB 15-pin (1)

Audio input:

AV audio (1)

VGA audio (1)

Component audio (1)

Audio output: AV audio (1)

HEADPHONE output (1)

HDMI input (1)

Dimensions(TV and Base) 537(L)X405(H)X178(D) mm

Weight(TV and Base) 6kg

55

Specifications


ALCD2257 User Manual

Documents

Transcript of ALCD2257 User Manual