Alba Diagnostics Braking Catalogue

BRAKING CATALOGUE

INNOVATIVE WORKSHOP SOLUTIONS

BRAKE FLUID TESTER PART No. ALB1100

1

BRAKE FLUID TESTING

PRINTER FOR USE WITH ALBA

PART No. ALB1200PTR

Model

Number

Maximum

Temperature

Printer

Enabled

ALB1000

ALB1100

ALB1150

ALB1200

200°C/392°F

320°C/608°F

320°C/608°F

320°C/608°F

Unit complete

with printer

BRAKE FLUID TESTER ALB1150

BRAKE FLUID TESTER OPTIONS

Printer unit for use with

ALB1150 & as supplied with

ALB1200

Printed report shows: Your

company name (if the unit is

own branded), brake fluid

tester’s unique serial no,

battery voltage, test results in

°C/°F & Alba change recommendations

All you have to do is complete the date & vehicle

registration number & hand it to your customer or

attach to their service schedule/MOT test report

Spares Available: ALB1100-1 Cable repair kit, ALB1100-4,

Pipette & fluid container, ALB1100-RK Probe end repair kit

Boiling point tester: the only test method approved by brake

& brake fluid manufacturers

Increase service revenue & road safety

Accurate, reliable & repeatable results

Operates off 12 volt supply, vehicle’s own battery

User friendly - LCD screen instructions lead operator

through the complete testing sequence

Measures up to 320°C, suitable for use on all grades of

brake fluid

19 Languages available: Croatian, Czech, Danish, Dutch,

English, Finnish, Flemish, French, German, Hungarian,

Italian, Japanese, Lithuanian, Norwegian, Polish,

Portuguese, Spanish, Swedish, Turkish

Test takes only 30 seconds

FACT: About 1 in 2 vehicles have fluid that has

absorbed too much moisture to be safe

Moisture absorption reduces brake

fluid’s heat resistance


www.albadiagnostics.com

2

BRAKE BLEEDING

DIGITAL ELECTRONIC PRESSURE

PART No. ALB585

PRESSURE BRAKE BLEEDER WITH CAP ADAPTOR KIT PART No. ALB560MVC

BRAKE BLEEDER

Pressure brake bleeding is the only method approved by brake

manufacturers

Full fluid change in approx. 15 minutes by a single operator

Portable: operates off 12V supply (vehicle battery)

Capacity 1.25ltrs

No compressed air used, therefore no possibility of contamination of

the fluid

Supplied with ALB30564B Multi Vehicle Cap Adaptor Kit

Suitable for clutch bleed as well as brake bleed

Pressure bleeding is the only method approved by brake

manufacturers

Full fluid change can be completed by a single operator in

approx. 15 minutes

Heavy Duty Pump for longer life and continuous use

Fully adjustable digital pressure controller, 0.5 - 4.0 bar

6 litre fluid change capacity

Operates off 12v supply (vehicle battery)

Stainless Steel

construction

No compressed air used,

therefore no possibility of

contamination of the

fluid

Storage facility for fluid

collection container and

accessories (ALB30654B

Cap Kit)

Suitable for use on Car

and LCV Brake systems,

and also on HGV Clutches

PART No. ALB598

PRESSURE BRAKE BLEEDER PART No. ALB560A

Also available:

Spares Available: ALB560-1 Pump ALB560-2 Pump Seals

Pressure bleeding is the

only method approved

by brake manufacturers

Full fluid change can be

completed in approx.

15mins by a single

operator

Fully adjustable

pressure regulator,

0 - 3.0 bar

Draws fluid direct from

5ltr container

Auto cut-off prevents

air entering system if fluid supply is interrupted

Portable unit with carry handle - only 9.0kg

Operates off 12v supply (vehicle battery)

Storage facility for Brake Fluid container (5 ltr) and Multi

Vehicle Cap set (ALB30564B - supplied with ALB598 & ALB599)

PORTABLE PRESSURE BRAKE BLEEDER 12V

PART No. ALB599A

PORTABLE PRESSURE BRAKE BLEEDER 230V

Specification as per ALB598 (above) but with 230V. mains

power supply

Also available:

Approved by Toyota Approved by Renault



3

BRAKE BLEEDER CAP KITS

MULTI VEHICLE CAP ADAPTOR KIT PART No. ALB30564B

MULTI VEHICLE CAP ADAPTOR KIT PART No. ALB30564

ASIAN CAP ADAPTOR KIT PART No. ALB40100

Suitable for use with most pressure brake bleeders (including ALB560,

ALB575, ALB585, ALB595, ALB598, ALB599A & ALB30570)

ALB30644 European cap adapter with swivel elbow Ø42.8

ALB592B patented multi-vehicle cap (Ø30-85mm)

Bleed bottle

Syringe (for fluid level reset if required in master cylinder)

Suitable for use with most pressure brake bleeders

Includes European cap adaptor, multi vehicle caps, American

adaptor (GM) & a selection of caps for BMW/Audi, Nissan, Mazda

& Honda

Syringe for fluid level reset

ALB560-11 - Ø50.5mm - Applications: Nissan Qashquai 2009-, Primera,

Rodius, X-Trail , Renault Koleos

ALB40114 - Ø43.5mm - Applications: Nissan Pixo 2009-, Suzuki Alto / SX4

ALB40115 - Ø28.5mm - Applications: Nissan Micra 2011-, Nissan Kubistar,

Cabstar, Urvan

ALB30644 - Ø Straight 42.8mm - Applications: Standard E20 thread Euro

Cap

ALB30644 - Ø Elbow 42.8mm - Applications: Standard E20 thread Euro Cap

with swivel elbow

Contents:



4

BRAKE BLEEDER CAP ADAPTORS

CAP ADAPTOR

PART No. ALB30903 PART No. ALB30912 Ø50.5mm

PART No. ALB560-12 PART No. ALB560-11

CAP ADAPTOR Ø50.5mm PART No. ALB560-10

MULTI VEHICLE CAP Ø30-90mm PART No. ALB30583

MULTI VEHICLE CAP Ø30 - 85mm PART No. ALB592B

CAP ADAPTOR Ø74mm PART No. ALB560-8



CAP ADAPTOR Ø55mm PART No. ALB560-9



Honda (all models) 2003>

Mitsubishi 2003> Toyota/Lexus Toyota: Previa, LiteAce, HiAce

Honda (all models) 2002>

For use with most Alba pressure

brake bleeders inc ALB560 etc

Mitsubishi 2003>

16mm 5mm

For use with ALB30570

Ø50.5mm Ø36mm Ø42.8mm PART No. ALB30644

CAP ADAPTOR Ø42.8mm

Nissan 2001>

CAP ADAPTOR Ø50.5mm PART No. ALB40018

Hyundai/Kia

Ford Fiesta Ford Transit Ford Escape/Kuga Nissan: Primera, Qashqai, X trail

CAP ADAPTOR CAP ADAPTOR CAP ADAPTOR

For full application lists please contact us [email protected]

Most European models



5

Vacuum Brake Bleeding

BRAKE FLUID REFILL BOTTLE PART No. ALB30558-3

BRAKE BLEEDER PART No. ALB30570

Easy one-person operation

Simple hand-pump operation to

create pressure

Portable

Supplied with ALB30644 European

cap adapter with swivel elbow

Ø42.8mm

3 litre capacity

1 litre capacity

Uses standard workshop

air supply

Unique rubber joint for

fluid extraction (avoids

leaks)

Removes fluid via bleed

nipples to allow bleeding

or entire fluid

replacement

VACUUM BLEEDER & FLUID

PART No. ALB30591

PRESSURE/VACUUM PUMP PART No. ALB30878

Includes brake fluid collection bottle for brake bleeding

Gauge reads 0 - 30 in. Hg (0 - -1 BAR) vacuum; 0 - 60 psi

(0 - 4 BAR) pressure

VACUUM BRAKE BLEEDER KIT

Unique rubber joint for fluid extraction (avoids leaks)

Removes fluid via bleed nipples to allow bleeding or entire

fluid replacement

Complete with motorbike attachment

PART No. ALB30558

PRESSURE & VACUUM PUMP PART No. ALB30647

HAND-OPERATED PRESSURE

EXTRACTOR

Kit includes everything for

performing hundreds of

automotive diagnostic and

mechanical tests

Used for one-person brake

bleeding

Produces vacuum or pressure

at the turn of a switch

One-finger trigger vacuum/pressure release

Includes durable, accurate diaphragm-style compound

pressure/vacuum gauge Max. Vacuum/Pressure 25 in Hg

30psi (2 Bar)

• Swivel top bottle

• Adjustable spout avoids spillage on refills

• Magnet base

Hand pump can be set

to pressure or vacuum

Kit comprises a

selection of fittings &

hoses - adapts to most

components requiring

test

Vacuum brake

bleeder and

bleed bottle

1 litre capacity

Uses standard

workshop air

supply



6

AIR OPERATED BRAKE DISC CLEANER PART No. ALB30548

Remove filter to recycle waste

water/detergent; recycle function

prolongs life of the brake cleaning fluid

Tank capacity 40Ltrs

Fluid level indicator

Extra-large diameter drain pan &

removable filter grid

Industrial quality castors

(2 lockable)

Offset adjustable telescope post

1260mm – 1420mm; use under

lift or next to ramp

Heavy duty nylon brush

BRAKE PIPE FLARING

HAND HELD FLARING TOOL 4.75 SAE (3/16”) PART No. ALB40006

Produces both convex & double lap flares to SAE & DIN standard 4.75mm pipe (3/16” )

PART No. ALB30915

HAND HELD FLARING TOOL 4.75 SAE (3/16”) & 4.75 DIN PART No. ALB30893

Made in the UK

Makes brake flaring simple and hassle free

Produces 4.75 (3/16”) SAE flare

Extremely easy to use & lightweight

Made from high quality steel & copper tube

No pushing back ensuring flare form is correct

every time

Use with two ratcheting spanners (10mm & 16mm)

Made in UK

Workshop tool designed to be secured on a bench vice

Produces both Convex and Double Lap flares to both SAE

and DIN standards

• 'Dial-a-Size' turret design for ease of use

• Lever cam operation for quick flaring

• Automatic punch extraction from the flare

• All components available individually

Made in UK

Patented design for producing

high quality flares on the

vehicle

Creates SAE & DIN single and

double flares (3/16” &

4.75mm). For steel & cupro

nickel tube

Small and compact for easier

Spares Available: Brushes

ALB30549 Straight

ALB30550 Offset

WORKSHOP BRAKE PIPE

Kits Available:

FLARING TOOLS

PART No. ALB30688 Produces both convex & double lap flares to SAE & DIN standard 4.75mm pipe (3/16” ), 6mm (1/4”), 8mm, 10mm

PART No. ALB40117 Produces both convex & double lap flares to SAE & DIN standard 4.75mm pipe (3/16” ) & 6mm (1/4”)



7

BRAKE HOSE CLAMPS & STOPPERS

ALUMINIUM LINE CLAMPS x 3 PART No. ALB30678

PLASTIC LINE CLAMPS x 3 PART No. ALB30757

BRAKE PIPE NUT RATCHETING

PART No. ALB30884

FLARE NUT WRENCH SET 3PCS PART No. ALB40017

NEW design made from ALUMINIUM, not plastic

Smooth rounded jaw edges prevent damage to hoses

Quick & simple to use

Triple pack includes 1 each large,

medium & small clamps

New design made in plastic

Smooth rounded jaw edges prevent damage to hoses

Quick and simple to use

Triple pack includes 1 each large, medium and small

clamp

Sizes 8 - 15mm supplied in

pouch

Unique patented ratcheting

system for fast and easy

removal of brake pipe nuts

and inline nuts

Can be opened and closed to

fit around the nut completely

Ideal for work on rounded,

worn or rusty nuts

The more pressure exerted

on the tool, the tighter the

grip on the nut

Swivel on both ends

• High quality chrome vanadium steel

• Sizes - 10x11, 13x14, 15x17mm

• Supplied in protective carry pouch

WRENCH SET 4PCS

Sizes:

8 & 9mm

10 & 11mm

12 & 13mm

14 & 15mm



8

BRAKE PIPE CUTTING & BENDING

BRAKE PIPE BENDING PLIERS

PART No. ALB30723 4.75mm (3/16”)

For forming bends in brake & clutch pipe

For 4.75mm (3/16”) diameter brake pipe

Ideal for use on vehicle or in restricted space

DE-BURRING TOOL PART No. ALB30746

To ensure brake pipe is correctly deburred inside & out

before flaring

• For 3/16” – 1 ½” OD

• Plastic body

• Inside/Outside Deburring Tool

TELESCOPIC PIPE CUTTER PART No. ALB30753

For 1/8” – 1 ¼” (3mm –

32mm) O D Tube

Telescopic action cutter

Cuts close to flared pipe

ends

Includes a spare cutter

wheel and foldaway deburring blade

MINI PIPE CUTTER PART No. ALB30754

For 1/8” – 5/8” (3mm-

16mm) OD Tube

Ideal for on vehicle use

PIPE RUST REMOVER TOOL PART No. ALB40042

Designed for scraping off the dirt and

rust on brake pipes easily

Diamond encrusted surface effectively

removes dirt and rust

BRAKE PIPE BENDING PLIERS

PART No. ALB40118 4.75 & 6mm

Spares available:

Cutting Wheel ALB30747

For forming bends in brake &

clutch pipe

For 4.75mm & 6mm diameter

brake pipe

Ideal for use on vehicle or in

restricted space



9

DIGITAL BRAKE DISC MEASURING

PART No. ALB40029

• Measurement Range: 0 –60mm (Metric & Imperial)

• Accuracy: +/-0.04mm

• LCD Display

• Includes serial port connection for computer interface

TOOL

MEASURING

ANALOGUE DISC RUN-OUT KIT PART No. ALB30602A

DIGITAL BRAKE DISC / PAD

PART No. ALB30596

DIGITAL BRAKE DRUM

PART No. ALB30597

DIGITAL VERNIER CALIPER PART No. ALB30598 DIGITAL DISC RUN-OUT KIT

PART No. ALB30602DI

• Measurement Range: 0 - 150mm (Metric & imperial)

• Accuracy: +/- 0.15mm

• Packaging: sturdy plastic case





• Accuracy: 0.03mm


Includes analogue indicator, special grip clamp and flexi

shaft

Measurement Range: 0 - 12.5mm (Metric & imperial)



MEASURING TOOL

MEASURING TOOL

• Includes digital indicator, special grip clamp and flexi shaft

• Measurement Range: 0 - 12.5mm (Metric & imperial)





10

MEASURING

DIGITAL BRAKE SERVICE KIT PART No. ALB30605 Contains all the Digital tools you need to measure:

• Brake discs & pads (ALB30596)

• Brake drums & shoes (ALB30597)

• Pad thickness / tyre depth (ALB30586)

• Disc run-out (ALB30602A)

• Plus vernier caliper (ALB30598)

• All packed in a sturdy plastic case

The essential kit for all fast fit outlets, service

centres & road safety checks

DIGITAL TYRE DEPTH GAUGE PART No. ALB30586

DIGITAL TYRE DEPTH GAUGE

PART No. ALB30658

BRAKE LINING GUIDE TOOL PART No. ALB30992

BRAKE TESTING COMBO KIT PART No. ALB30801A

MOT APPROVED




• Measurement range: 0 - 10mm (metric and imperial)


• Supplied pre-calibrated

• Comes with calibration plate (to zero unit)


Ideal for quickly checking remaining

life of brake pad friction material

The blade is inserted between brake

disc and brake pad

Red = replace now

Yellow = replace soon

Green = OK

Red 2 and 3mm

Yellow 4, 5 and 6mm

Green 8, 10 and 12mm

• Digital Vernier caliper (ALB30598)

• Digital brake disc measuring tool 0-60mm (ALB40029)

Kit contains:



11

BRAKE CALIPER TOOLS

PISTON REWIND TOOL SET PART No. ALB30728

PISTON REWIND TOOL SET PART No. ALB30783

AIR OPERATED CALIPER PISTON

PART No. ALB30843

PISTON REWIND ADAPTOR SET 35PCS PART No. ALB30844

• Winds back brake pistons to replace brake pads.

• Fits most European and Japanese cars

• Magnetic pad holds adapters in place

• Manual rewind tools for right and left handed applications

• Comprises 17 adaptors

• Winds back brake pistons to replace brake pads


• Pneumatic rewind tool with air adjusting lever

• Magnetic pad holds adapters in place

• Tool for both left and right handed threaded pistons


Air operated rewind tool for both

left and right handed threaded

pistons

Winds back brake pistons to replace

brake pads

Air adjusting lever

Suitable for most 3/8” Sq Dr wind

back and pin type adapters

Ideal for use with ALB30844 piston

rewind tool adapter set

Use with ALB30843 air operated piston rewind tool;

ALB30845 manual RH & LH piston rewind tool, or

ALB30990 double ended rewind tool to rewind brake

pistons to replace brake pads



REWIND TOOL 3/8” SQ DR



12

BRAKE CALIPER TOOLS

RH & LH MANUAL REWIND TOOL SET PART No. ALB30845

DOUBLE END BRAKE CALIPER REWIND

PART No. ALB30990

PROFESSIONAL TECHNICIAN KIT PART No. ALB40091

EPB/SBC SERVICE TOOL PART No. ALB30916

For rewinding the piston in all collet-type disc brake

calipers with built in parking mechanism

• Unique double-ended tool with RH & LH rewind threads

Contents:

• 1 pc - 3/8” Dr. Force Screw with Reaction Body

• 1 pc - Reaction Plate

• 1 pc – 3/8” Adapter

For use with ALB30844 piston rewind

tool adapter set

Integral magnetic pad holds adapter

in place

Includes left and right handed thrust

bolt assemblies

Suitable for wind back and push back

brake pistons

Fits most European & Japanese cars

Compatible with Ford,

Mercedes, Volvo, VW/Audi

(see applications below)

Deactivate and re-activate EPB &

SBC electronic brake systems

Read & Clear fault codes

Reset ECU, warning lights and

pad thickness

Pad change / Brake fluid change

Emergency release / EPB

function test / Acceleration

sensor test

Security access to Volvo BCM

• Applications :

Audi - A4, A5, A6, A8, Q5, Q7, RS6, S4, S5, S6, S8 2004 - 2011

VW - Passat, Tiguan 2005 - 2011

Mercedes - SL, E Class 2003 - 2007

Ford - Focus, C-Max 2002 - 2007

Volvo - XC60, XC70, V70, S80 2007 - 2010

DRIVER RH & LH

Kit contains:

• Digital Brake Disc Caliper 0-60mm (ALB40029)

• Analogue disc run-out (ALB30602A)

• Brake lining guide tool (ALB30992)

• Small Disc Hub Cleaning Kit (ALB30861)

• Wire Brush (WB05/R)

• All packed in a sturdy plastic case

The essential kit for all technicians for brake disc servicing



13

BRAKE HOSE CLAMPS & STOPPERS

LINE CLAMP & STOPPER KIT PART No. ALB30943

BRAKE FLUID STOPPER TWIN PACK PART No. ALB30989

FLUID STOPPER KIT PART No. ALB40039

FLARED PIPES FLUID STOPPER KIT PART No. ALB40043

Quality set of tools for use on brake and fuel supply

lines to stop the flow of fluid after disconnection

Suitable for use on solid and flexi

fuel, transmission, and brake lines

Extended clamp for flexi hoses

Pipe separator included

Idea for use on brake and fuel supply lines to stop the

flow of fluid after disconnection

• Suitable for use on flexi and solid fuel lines

• Fits: 10.00 (3/8”), 8.00 (5/16”) , 12.00 (1/2”) and Steel

Banjo fittings

• Sold in a pack of two

A wide-ranging kit designed to stop the flow of fluids from

brake and fuel lines after disconnection

Compatible with brake, transmission, fuel lines and other

applications

• 4.75 (3/16"), 6.00 (1/4"), 8.00 (5/16") & Banjo Fitting

This tool kit is ideal for sealing metal brake pipes

Suitable for metal flared pipes as used in braking systems,

cooling systems, fuel pipes, AC pipes etc

• Size range: 4mm - 10mm



14

VISIT www.albadiagnostics.com

FEATURES:

ALL OUR PRODUCTS IN ONE EASY TO

NAVIGATE SECTION

AN ALL NEW BUSINESS TO BUSINESS

SECTION FOR OUR CUSTOMERS AL-

LOWING ONLINE ORDERING, VIEW

UP TO DATE PRICING , VIEW NEW

PROMOTIONS AND MUCH MORE

FIRST PLACE TO SEE OUR ALL NEW

PRODUCTS

UP TO DATE PRODUCT IMAGES AND

INFORMATION

LINK TO OUR NEW FACEBOOK PAGE

LINK TO OUR YOUTUBE PAGE

EXPORT SALES EXPORT SALES EXPORT SALES --- albaexportalbaexportalbaexport UK SALES UK SALES UK SALES --- alba.salesalba.salesalba.sales

MARKETING MARKETING MARKETING --- albamarketingalbamarketingalbamarketing

ACCOUNTS ACCOUNTS ACCOUNTS --- albaaccountsalbaaccountsalbaaccounts

Connect with us via




Alba Diagnostics Ltd

Bankhead Avenue

Bankhead Industrial Estate

Glenrothes

Fife

Scotland

KY7 6JG

T: +44 (0)1592 774333

F: +44 (0)1592 774777

[email protected] www.albadiagnostics.com

Alba Diagnostics Braking Catalogue

Documents

Transcript of Alba Diagnostics Braking Catalogue