Alat Lab Tambahan 1

download Alat Lab Tambahan 1

of 55

  • date post

  • Category


  • view

  • download


Embed Size (px)


Alat Laboratorium tambahan 1

Transcript of Alat Lab Tambahan 1

General Equipment

CHAMBER FURNACESStandard features: 1100C maximum operating temperature 6, 14 or 23 litre chamber volumes Tilt forward, drop down door with air gap to minimize external temperature Carbolite 301 controller, with single ramp to set-point facility Delayed start & process timer function as standard Vacuum formed, low thermal mass insulation Hard ceramic hearth fitted as standard Ventilated via top mounted ceramic chimney


GENERAL PURPOSE CHAMBER FURNACESStandard features: 1100C, 1200C or 1300C maximum operating tempera ture 5, 13 or 23 litre chamber volumes Up & away door keeps heated surface away from the user Carbolite 301 controller with single ramp to set-point facility Delayed start & process timer function Hard wearing alumina element carriers, furnace entrance & hearth Energy efficient low thermal mass insulation Free radiating wire wound elements pitched for optimum uniformity Easy access to elements & controls simplifies maintenance & servicing CWF

HIGH TEMPERATURE SINGLE ZONE TUBE FURNACEStandard Features: 1500C & 1600C maximum operating temperatures Using worktubes of 60 or 90mm outer diameter Accepts worktubes with 180, 450 or 610mm heated tube length Silicon carbide heating elements Horizontal configuration Carbolite 301 controller, with single ramp to set-point facility Delayed start / process timer function as standard


General Equipment

Freeze Dryer ALPHA 1-2 LDplusWhat is freeze drying (Lyophilisation)? Freeze drying means: Extraction of water from frozen material. The drying process takes place by avoiding the liquid state through sublimation, i. e. direct conversion from ice to vapor. This happens under vacuum and the temperature in the product is normally less than -10C The freeze dryer ALPHA 1-2 LDplus is suitable for drying of e. g. bacteria and virus cultures, blood plasma, serum fractions, antibodies, sera, vaccines and pharmaceutical products such as chloramphenicol, streptomycin, vitamins, ferments as well as plant extracts for biochemical tests.

Specification: Ice condenser

: capacity max. 2.5 kg : performance: max. 2 kg / 24 h : temperature: approx. 55oC : width: 315 mm : height: 345 mm, dept: 460 mm : approx. 28 kg : according to DIN 45635:49 dB(A) : 230 v / 50Hz (others upon request) : 1,2 kVA : 5A : 6,3 A : Climate category: SN +10oC to +25oC, higher temperatures upon request)

Physical data (without vacuum pump) Dimensions of the unit (ind. Vacuum flange connection) Weight Noise emissions Electrical connection Power consumption Max. current Fuse protection Ambient temperature

Consist of : Alpha 1-2 / LD Plus 101021) Vacuum Pump RZ2 125302) Vacuum hose Vacuum sensor TPR265 Exhaust filter Base plate 120890) Acrylic Chamber 121455) 8 rubber valves 3 shelves with rim 120893) 8 round flasks 500 ml (cat #: (cat #: (cat #: 125702) (cat #: 125479) (cat #: 125501) (cat #: (cat #: (cat #: 121860) (cat #: (cat #: 127360)

General Equipment

ROTATIONAL VACUUM CONCENTRATOR FOR LABORATORYRVC SERIESThe Christ RVC-series is well structured in size and combination with different cooling traps and vacuum pumps. This gives the customer a maximum benefit for every application. Examples for multiple applications: Efficient concentration of DNA/RNA-samples, proteins etc. BioTech and Genetic Engineering Sample preparation in HPLC, GC, MS, Electrophoresis ... Isolation and synthesis of natural compounds Storage and handling of drugs (chemical libraries) Combinatorial Chemistry High-Throughput-Screening (HTS)

RVC 2-25 CD

Rotational-Vacuum-Concentrator RVC 2-25 CD the mid-size concentrator: all-purpose table-top cencentrator for the routine concentration oflarger sample volumes rotor capacity 108 x 1,5/2,2 ml tubes up to 2 x microtiter-plates standard acrylic glass cover, optional stainless steel/glass compound cover with window (corrosion proof, e. g. for DCM/ACN) chemical resistant diaphragm pumps (2 m3/h suction capacity, 9 mbar final vacuum), standard, vacuum systems with lower vacuum and vacuum controls, optional optional combination with cooling traps (2 or 4 litres) for increased evaporation

General Equipment

Ultrasonic Cleaners BathsElmasonic PThe most professional way to use ultrasound Digital displays, self-explanatory operation, clear indication of all

parameters, set and actual values at a glance. Two different ultrasonic frequencies in one unit (frequency can be changed during operation): 37 kHz - for coarse contaminations, for dissolving, blending, dispersing and degassing 80 kHz noise-reduced operation, ideal for quiet work areas, prolonged ultrasonic cleaning cycle, perfect for the cleaning of hollow spaces, e.g. capillaries 7 special ultrasonic features (Normal, Pulse, Sweep, Degas, Power rasonic Operation up to 140% power control, Pause, Auto Start)

40 kHz Ultrasonic FrequencyTransonic type Outer Dimensions (mm) Inner Dimensions (mm) Tank capacity Drain duct V4A () Power consumption total (W) Ultrasonic Frequency Heating power (W) Sweep Pulse P 30 H 300x179x221 240x137x100 2.75 L 3/8 320/300 37/80 kHz 200 integrated activatable

P 60 H 365x186x271 300x151x150 5.75 L 3/8 580/550 37/80 kHz 400 integrated activatable

P 70 H 568x179x221 505x137x100 6.9 L 3/8 820 37/80 kHz 600 integrated activatable

P 120 H 365x278x321 300x240x200 12.75 L 3/8 1130 37/80 kHz 800 integrated activatable

P 180 H 390x340x321 327x300x200 18 L 3/8 1130 37/80 kHz 800 integrated activatable

P 300 H 568x340x321 505x300x200 28 L 3/8 1580 37/80 kHz 1200 integrated activatable

Elmasonic S Series Offers... Sweep function for an optimized sound field distribution in the

cleaning liquid by frequency modulation Degas function for the efficient degassing of the cleaning liquid

and for laboratory purposes Electronic timer from 1 to 30 minutes Plastic carrying handles

Parameter Tank Volume Internal dimension Ultrasonic frequency Heating Power Drain duct diameter

S40H 4.25 lt 240x137x150mm 37 kHz 200 W 3/8

S60H 5.75 lt 300x151x150mm 37 kHz 400 W 3/8

S70H 6.9 lt 505x137x100mm 37 kHz 600 W 3/8

S100H 9.5 lt 300x240x150mm 37 kHz 600 W 3/8

S300H 28 lt 505x300x200 37 kHz 1200 W 3/8

General Equipment

RESEARCH PLUS PIPETTEAvailable Volume: Adjustable: 0.1-2.5 L, 0.5-10 L, 2-20 L, 10-100 L, 20200 L, 30-300 L, 100-1,000 L, 0.5-5 mL, 1-10 mL. Multichannel: 0.5-10 L, 10-100 L, 30-300 L. Fixed volume: 10 L, 20 L, 25 L, 50 L, 100 L, 200 L, 250 L, 500 L, 1,000 L

Ultra light pipette with highest precision and accuracy, low operating force, ultimate ergonomics and flexibility, 4 digits volume display with magnifying shape, fully autoclavable, resistance to chemical, thermal and mechanical stress.

EPPENDORF ep T.I.P.SChoose from a wide range of ep T.I.P.S. : Purity level (Eppendorf quality, Eppendorf PCR clean, Eppendorf biopur), filter (standard or dual filter), and packaging (box, reloads, set, singles, or rack).

MULTIPETTE PLUS, STREAM & XSTREAMPositive displacement dispenser: Ideal for dispensing volume in long series, contamination-free (eliminates aerosol formation) application eg. PCR application, toxic, infectious or radioactive liquids, aggressive liquids (e.g. concentrated acids), also ideal for problematic liquids such as viscous, high vapor pressure and high/low density liquid.


General Equipment

MICROLITER 600, 700, 800 and 900 Series 2.5 L to 500 L This type of syringe*, for use with liquids, incorporates a stainless steel plunger that is individually fitted to its matching syringe barrel. The plunger is not interchangeable or replaceable. 600 Series 2.5 L and 5 L Reinforced plungers prevent plunger bending Rugged, durable and long lasting 700 Series 5 L to 500 L Economical; great for chromatography Also available: ground glass tip (luer tip, LT) termination 800 Series 5 L to 250 L Reinforced plungers Plunger stop prevents plunger blow-out 900 Series 5 L and 10 L Reinforced plungers Perfect for students: rugged and durable MODIFIED MICROLITER 7000 Series 0.5 L to 5 L Positive displacement syringe has a tungsten plunger wire that travels inside the needle The needle essentially acts as the glass syringe barrel; no dead volume Replaceable plunger wire and needle

Syringe size 0.5-5 l 2.5-5 l 5-10 l 5-250 l 10-250 l 10-500l 1-100 ml

600 series

700 series

800 series

900 series 7000 series 1000 series 1700 series 1800 series

General Equipment

HAMILTON SPECIAL SYRINGESuper Syringes 5 L to 2 L For air sampling, preparing gas standards; or calibrating reservoirs, pneumographs, and spirometers. Used in industries such as: mining, chemical production, grinding and mineral processing. Syringe barrel is made of a clear acrylic material. Purge & Trap Syringes 5 mL and 25 mL These syringes are designed for the analysis of drinking water Samples according to EPA purge and trap concentration techniques.

Carbon Analyzer Syringes 50 L to 250 L For water analysis with Total Organic Carbon (TOC) analyzers. Wetted parts are stainless steel and borosilicate glass. Syringes have a metal luer tapered hub cemented over a MICROLITER 700 Series N syringe. The luer hub fits precisely into the inlet of a total carbon analyzer.

PB600 Repeating Dispensers 10 L to 10 mL Consistently dispense sample up to 50 times with the push of a button. The repeating dispenser works with MICROLITER or GASTIGHT syringes from 10 L to 10 mL.

SampleLock Syringes 50 L to 100 mL Lock your sample in the SampleLock syringe with the easy-to-use twist valve. An internal standard can be injected through the valve port into samples conta