17

MRP Scrap is used by steel manufacturers for producing Ingots, Billets and TMT Rebars.

• Cast Iron (high C) generally in the form of Ferroshots, Pig

following which a hot metal bath is created.

• Subsequently, Sponge Iron is charged. While charging Sponge Iron, MRP Scrap, which serves as a supplement, is also charged. In simpler terms, MRP Scrap serves as a replacement for Sponge Iron in the charge-mix depending on its Met Fe% ranging from 30% to 65%.

• The proportion of MRP scrap in the charge mix depends on

benchmarked with sponge iron/scrap.

• through additional screening, drumming and wet milling which would increase the met Fe% and make further commercial sense to be used in furnaces.

Applications

MRP Scrap is generated through screening and magnetic separation of Steel making Slag that originates in

IBMD sells MRP Scrap via the auction route. MRP Scrap is of various sizes but mainly of 2 types -

Iron Scrap

Steel Scrap

Speci�cations

MRP Scrap

Chemical Analysis (20 - 80 mm) Steel Scrap

Fe % CaO % SiO2 % P % MgO % MnO % C % S %

60 - 65 10 - 12 2.5 - 5 0.1 - 0.3 2.5 - 6 1.5 - 3 0.2 - 0.8 0.05 - 0.1

MRP

SCR

AP