VG COMMANDS lsvg Display all VGs lsvg -o Display all active VGs lsvg rootvg Display info about rootvg lsvg -l rootvg Display info about all LVs in rootvg lsvg -o |lsvg -il Display info about all LVs in all VGs lsvg -p rootvg Display info about all PVs in rootvg lsvg -l `lsvg` display info about all lv in system mkvg -s 8 hdisk1 Create VG with name vgxx on hdisk1 with partition size 8MB mkvg -s 8 -y sivg hdisk1 Create VG with name sivg on hdisk1 with partition size 8MB mkvg -s 4 -t 2 -y sivg hdisk1 Create sivg on hdisk1 with PP size 4 and no of partions 2 * 1016 chvg -a y newvg To cuase VG newvg automatically activated at startup chvg -a n newvg To deactivate the automatic activation at startup chvg -t 2 newvg To change maximum no. of PP to 2032 on vg newvg chvg -Q n newvg To disable quorum on VG newvg reorgvg newvg Reorganises PP allocation of VG newvg extendvg newvg hdisk3 hdisk4 Add PV hdisk3 and hdisk4 to VG newvg exportvg newvg Exports the VG newvg importvg -V 44 -y newvg hdisk2 Import the hdisk2 with name newvg, and assign major number 44 redcucevg newvg hdisk3 Remove PV hdisk3 from VG newvg varyoffvg newvg To deactviate VG newvg varyonvg newvg To activate VG newvg syncvg -v sivg To sync the mirrored LV in the VG sivg mirrorvg -S -m sivg hdisk2 To mirror LVs of sivg with hdisk2 (-m for exact mirror, -S forbackground mirror) unmirrorvg sivg hdisk2 To remove the mirrored PV from the set. FS COMMANDS lsfs Lists all filesystems in the /etc/filesystems entry lsfs -q List all filesystems with detailed info lsfs -a To list all filesystems (default) lsfs -l Specify the output in list format lsfs -c Specify the output in column format lsfs -v jfs Lists all jfs filesystems chfs -a size=24576 /si Change size of FS /si to 24576 x 512 bytes blocks (12 MB) chfs -a size=+24576 /si Add 24576 x 512 byte blocks to FS /si chfs -asize=-500M /file/system you can also decrease size chfs -m /si /bi Change the mount point from /si to /bi chfs -A /si To auto mount the filesystem si chfs -d account /si Remove account attribute of /si. ( from /etc/filesystems file) chfs -a splitcopy=/backup -a copy=2 /oracle This will mount the 2nd copy of mirrored

filesystem oracle to /backup in read-only mode crfs -v jfs -g testvg -a size=64465 -m /siju Creates FS /siju of type jfs in VG testvg of blocksize 64465 crfs -v jfs -d /dev/lv00 -m /siju Create FS /siju of type jfs on device /dev/lv00 rmfs /siju Deletes FS /siju and associated LV rmfs -r /siju Deletes FS /siju its mount point and associated LV defragfs /sifs To defragment the file system /sifs defragfs -q /sifs Display the current defrag status of the file system fsck -y n /dev/lv00 To fsck the filesystem associated to /dev/lv00 assuming response "yes" fsck -p /dev/lv00 To restore superblock from backup superblock dumpfs /filesystem To see the superblock contents PV COMMANDS lspv hdisk0 Display status and characteristics of the PV lspv -p hdisk0 Display PP usage of hdisk0 lspv -l hdisk0 To list all logical volumes on PV hdisk0 lspv -M hdisk0 chpv -v r hdisk1 Close the PV (Used while removing PV without varyon) chpv -v a hdisk1 Open the PV chpv -c hdisk0 Clear the master boot record on PV hdisk0 migratepv hdisk1 hdisk2 To move PPs from PV hdisk1 to hdisk2 migratepv -l silv hdisk1 hdisk2 To migrate LV silv from PV hdisk1 to hdisk2 chpv -hn pvname to disable hotspare chpv -hy pvname to enable hotspare chdev -l pvname -a pv=clear to clear the pvid chdev -l pvname -a pv=yes to get the new pvid bootinfo -s pvname to see the size of pv LV COMMANDS lslv -l lv00 Display info about LV by PV lslv -p hdisk1 Display LV allocation map for hdisk1 chlv -t copy lv00 To change the lv00 to copy type chlv n silv lv00 To rename lv00 to silv chlv -x 950 ora1data_lv To change the ora1data_lv to chlv -p r lv00 To change the lv00 to readonly mode rmlv silv To remove silv rmlv -f silv To remove silv without user intervention mklv -s n -c 3 silv hdisk1 To make LV silv with three copies on hdisk1 extendlv silv 5 To extend the LV silv with 5 LPs mklvcopy -s n lvsi 2 hdisk1 To mirror LV lvsi on same PV with 2 copies mklvcopy lvsi 3 hdisk1 hdisk2 To mirror LV lvsi on PV hdisk1 and hdisk2 with 3 copies rmlvcopy lvsi 2 hdisk1 Will remove one copy of LV lsvi from hdisk1 mklv -t jfslog -y log00 newvg 2 To create a jfslog with name log00 on VG newvg with 2LPs

logform /dev/log00 To format jfslog volume log00 mklv/extendlv -a = PP alocation policy -am = middle -ac = center -ae = edge -aie = inner edge -aim = inner middle migratepv -l (lv) (old pv) (new pv) Move a logical volume between physical volumes. Both physical volumes must be in the same volume group ! mklv -y (lv) -t jfslog (vg) (No of PP's) (pv Name optional) Creates a JFSlog logical volume. logform (/dev/lv) Initialises an LV for use as an JFSlog getlvcb -AT (lv) Displays Logical Volume Control Block information cplv -y newlv -v vgname oldlv to copy lv within a vg or different vg BLV COMMANDS bootlist -m normal -o To see the boot sequence in normal mode bootlist -m service -o To see the boot sequence in service mode bootlist -m normal cd0 hdisk0 To change boot sequence to cd0,hdisk0 in normal mode bootlist -m service cd0 rmt0 hdisk0 To change boot sequence to cd0,rmt0,hdisk0 in service mode bosboot -ad /dev/hdisk1 To create boot image on PV hdisk1 mkboot -cd /dev/hdisk1 To clear the boot image bootinfo -b Specifies the bootable disk bootinfo - t Specifies the type of boot bootinfo -e Check the machine can boot from tape bootinfo -T To see the machine hardware type bootinfo -s hdisk0 To see the size of hdisk0 bootinfo -r To see the size of memory bootinfo k To see the key position bootinfo m To see the machine model code bootinfo o hdisk0 To list the location code of hdisk0 bootinfo z To see the machine is multiprocessor capable bootinfo p To see the machine bosboot -a -d (/dev/pv) Creates a complete boot image on a physical volume. mkboot -c -d (/dev/pv) Zero's out the boot records on the physical volume. savebase -d (/dev/pv) Saves customised ODM info onto the boot device. PAGE SPACE COMMANDS lsps -a lsps hd6 chps -a y paging00 chps -a n paging00 chps -s4 paging00 mkps -a -n -s4 sivg To list out all paging spaces To display the details of the paging space hd6 To turn on the paging space paging00 To turn off the paging space paging00 To increase the size of the paging space in 4 LP blocks To create a paging space on VG sivg of 4 LP size (-s4) and activate

it immediately (-n) and activate it at every restarts rmps paging00 To remove the paging space paging00 swapon -a To invoke all entries in /etc/swapspaces file swapon /dev/paging00 To make available swap space paging00 SYSTEM DUMP COMMANDS sysdumpdev -l To list the current dump destination sysdumpdev -L List the details of the previous dump sysdumpstart -p Starts dump in the primary dump device sysdumpstart -s Starts dump in the secondary dump device sysdumpdev -p /dev/lv00 To make lv00 as primary dump device sysdumpdev -P -p /dev/lv00 To make lv00 as primary dump device permanently sysdumpdev -s /dev/rmt0 To make rmt0 as secondary dump device sysdumpdev -z To determine a new system dump occurred SYSTEM DUMP -------------------------------------------------------------------------------sysdumpdev -e Estimates dumpsize of the current system in bytes. (MCA machine can also dump if key is in service position and the reset button is pressed) sysdumpdev -p (dump device) -P Sets the default dump device, permanently Analyse dump file :echo "stat\n status\n t -m" | crash /var/adm/ras/vmcore.0 /usr/lib/ras/dumpcheck -p to check the problem with dumpdevice /usr/bin/sysdumpdev Device related commands cfgmgr To configure devices and installs device software in system cfgmgr -l vscsi0 To configure the components connected to the vscsi0 interface lscfg To display config, diagnostics and vital product definition info lscfg -l mem0 Display info about device mem0 lscfg -l ent* Display info about all Ethernet cards lscfg -v Display vpd lscfg -v -l hdisk0 Display vpd of hdisk0 mkdev -l rmt0 To change device rmt0 from defined state to available state lsdev -P To lists all supported devices lsdev -P -c disk To list all supported disks lscfg -vp|grep -ip cabinet To list all cabinets lsdev -P -r class To display supported class lsdev -P -r subclass To display all sub class

lsdev -C To lists all configured devices lsdev -C -l mem0 To display the properties of mem0 chdev -l sys0 -a maxproc=100 To change default maxproc value to 100 chdev -l rmt0 -a blocksize=512 To change the block size to 512 chdev -l rmt0 -a ret=no To avoid tape retension rmdev -l rmt0 To remove the device rmt0 rmdev -d -l rmt0 To remove the device totally from database rmdev -l rmt0 -S To change the state of the device stopped lsparent -C -k rs232 To display possible parent devices which accept rs232 devices lsparent -C -l hdisk0 To display parent devices which accept child device hdisk0 lsattr -Dl rmt0 To see the default values of the device rmt0 lsattr -El rmt0 To see the current values of the device rmt0 lsattr -El tty0 -a login -R To see all possible values of the login attribute of tty0 lsattr -R -l ent0 -a media_speed to see possible values for given attribute lsconn -p scsi0 To list all possible connection scsi0 can accept lvlstmajor To list the available major numbers mknod /dev/null c 2 2 Create null device with major (2) and minor (2) nos. (c - char device) lsattr -E -l sys0 -a maxuproc Console emulation commands lscons To list the current console lscons -b To list the console at next boot chcons /dev/tty3 To change the console to tty3 chcons -a login=enable /dev/tty3 Redirect console to tty3 and provide login prompt swcons /dev/tty3 To change system console to tty3 temporarily alog -L t console To see the current attributes of log type console alog t console o To see the console messages alog t boot o To see the boot time messages Installation specific commands lslpp -l To see the details of installed file sets lslpp -ha bos.net.* To list the installation history of all file set in bos.net packages lslpp -f bos.rte To list the files in the bos.rte package lslpp -w /etc/hosts To list the file set which contain /etc/hosts file lslpp -p bos.net.nfs.server To list the pre requisites for bos.net.nfs.server file set installp -L -d /dev/rmt0.1 To list the installable products on the device rmt0 installp -aX -d /dev/rmt0.1 bos.net To install all filesets within bos.net and expands file system if it requires installp -u bos.net To remove bos.net installp -r To reject the applied software installp -c -f To commit the installp -C To cleanup an incomplete installation

lppchk -c To check the instfix -k IX9999 -d /dev/rmt0.1 To install the file set associated with fix IX9999 from rmt0 instfix -ik IX9999 To verify fix IX9999 installed Network related commands host 193.9.200.1 Resolves ip to host name (from /etc/hosts file) host ibm Resolve ibm to ip address (from /etc/hosts file) hostname ibm To change the host name to ibm entstat en0 To the status of ethernet device en0 entstat -d en0 To list the detailed status of device en0 no -a To list all net configurable attributes and their values no -d thewall To change thewall parameter to its default value no -o ipforwarding=1 To make the machine as router in tcpip networks traceroute ibm To trace the route to ibm ping ibm To tcp ping to the machine ibm ifconfig -a To show the status of all network interfaces ifconfig en0 To show the status of en0 ifconfig en0 up Turns on network card en0 ifconfig en0 down Turns off network card en0 ifconfig en0 detach Removes en0 card from the network interface list ifconfig en0 inet 194.35.52.1 netmask 255.255.255.0 up Configure en0 starts immediately ifconfig en0 alias 195.60.60.1 Create alias ip address for en0 route add 0 192.100.13.7 To make 192.100.13.7 as default gateway for entire network route add 192.100.12.0 192.100.13.7 To make 13.7 as gateway for 12.0 network route -f To clear the gateway table chdev -l inet0 -a hostname=si To change the host name to si permanently netstat -a To show the state of all sockets netstat -c To show the network buffers cache netstat -D To show the net drops of packets netstat -i To display interface statistics netstat -r To show the routing table netstat -rn To show routing table (ip will be given instead of host names) netstat -s To show the statistics of the protocols netstat -s -p < tcp/udp/ipv6> To show the statistics of respective protocols Space usage commands du -k du -l du -s df -i To list number of bytes in 1k blocks To list number of bytes in 512 bytes blocks To list only the total disk usage in the current directory To display no of free and used inodes

df -k To display diskspace in 1024 bytes format pstat s Page space information dumpfs shows superblock, i-node map and disk map information for the file system specified. Ex : dumpfs /dev/hd3|more /dev/hd3: magic 0x43218765 cpu type 0x0 file system type 0 file system version 0 file system size 196608 fragment size 4096 block size 4096 allocation group size 2048 (frags) inodes/allocation grp 2048 compress 0 file system name /tmp volume name /tmp log device 0xa0003 log serial number 0xb4 file system state 1 read only 0 last update Thu Sep 24 14:31:28 BST 1998 lsfs Lists all filesystems lsfs -q (fs) Lists the file system details mount Lists all the mounted filesystems mount (fs or lv) Mounts a named filesystem mount -a Mounts all filesystems mount all mount -r -v cdrfs /dev/cd0 /cdrom mounts cd0 drive over /cdrom crfs -v jfs -d(lv) -m(mount point) -A yes Will create a file system on the whole of the logical volume, adds entry into /etc/filesystems and will create mount point directory if it does not exist. crfs -v jfs -g(vg) -m(mount point) -a size=(size of fs) -A yes Will create a logical volume on the volume group and create the file system on the logical volume. All at the size stated. Will add entry into /etc/filesystems and will create the mount point directory if it does not exist.

Backup commands mksysb -i -X /dev/rmt0 required) mksysb -m /dev/rmt0 mksysb -e /dev/rmt0 /etc/exclude.rootvg mkszfile mkcd -d /dev/cd1 mkcd -d /dev/cd1 -v vg00 mkcd -d /dev/cd1 -G savevg -i -f /dev/rmt0 vg00 Creates image.data and system backup (-X expands /tmp if Creates image.data file with map file and system backup Creates system data but excludes the files listed in Creates /image.data file Creates system boot backup to the CD-R device /dev/cd1 Creates backup of vg vg00 to CD-R device /dev/cd1 Creates generic boot backup Creates vg00.data image file and backup vg vg00

savevg -ef /dev/rmt0 vg00 Creates vg00 backup but excludes files listed in the /etc/exclude.vg00 find / -print | backup -ivf /dev/rmt0 Backup entire system to rmt0 backup -0vf /dev/rmt0 /home Backup /home directory to rmt0 with backup level 0 restore -Tvf /dev/rmt0 List the archive in rmt0 restore -xvf /dev/rmt0 /home Restore /home from archive in device rmt0 find ./home -print |cpio -ocvumB > /dev/rmt0 Archives /home directory cpio -icvdumB < /dev/rmt0 Restores cpio archive from rmt0 cpio -ivt < /dev/rmt0 List the contents of cpio archive from rmt0 cpio -icvd < /dev/rmt0 /home Restores /home directory from rmt0 tar -cvf /dev/rmt0 /home Archives /home to rmt0 device tar -tvf /dev/rmt0 List the archives in rmt0 tar -xvf /dev/rmt0 /home Extract /home from rmt0 dd if=si of=si1 conv=ebcdic Convert and copy ascii file si to ebcdic si1 dd if=/dev/rmt0 ibs=512 obs=1024 of=/dev/rmt1 To copy blocks from rmt0 with 512 blocks to rmt1 with 1024 blocks tctl -f /dev/rmt0 rewind To rewind the tape tctl -f /dev/rmt0 offline To eject the tape tctl -f /dev/rmt0 status To show the status of tape chdev -l rmt0 -a block_size=512 To change the block size of the tape to 512 vtmenu to see what are all running in hmc Print commands qchk -q qchk -P lp0 qchk -# 123 qchk -A qcan -x 123 qcan -X -P lp0 qpri -#570 -a 25 qhld # 569 qhld -r -#569 qmov -m lpa -#11 enable psq disable psq cancel -#111 lpstat lpstat -p lp0 lpstat -u root lpq -P lp0 To display the default q To display the status of the printer lp0 To display the status of job number 123 To display the status of all queues To cancel the print job 123 To cancel all jobs submitted to lp0 To change the priority of the job to 25 To hold the job 569 To remove holding from 569 To move the job 11 to queue lpa To enable queue psq To disable queue psq To cancel job 111 To display the status all queues To display the status of print queue lp0 To display the jobs submitted by user root To display the status of queue lp0

last last |grep shutdown uptime (w -u )

To list all the records in the /var/adm/wtmp file To show the shutdown sessions To show how long the system has been up

splp (device) Displays/changes printer driver settings splp /dev/lp0 export $LPDEST="pqname" Set default printer queue for login session lsvirprt Lists/changes virtual printer attributes. rmvirprt -q queuename -d queuedevice Removes a virtual printer qpri -#(job No) -a(new priority) Change a queue job priority. qhld -#(job No) Put a hold on hold qhld -r #(job No) Release a held job Licensing commands oslevel lslicense chlicense -u30 chlicense -f on To list the operating system level To see the number of license To change the fixed user license to 30 To enable floating user license

User commands id To list all system identifications for current user id -gn To list the default group for current user id -Gn To list all system groups for current user lsuser root To list the attribute of user root lsuser ALL To list the attributes of all users lsuser -a HOME ALL To list the home directory of all users lsuser -a ALL To list all usernames lsuser -a auth1 auth2 ALL To list the authentication method for all users lsuser -a expires ALL To list expiry date lsuser -a account_locked ALL To check account lock status of all users chsec -f /etc/security/user -a account_locked=false -s user chuser -a login=true san To enable the user san chuser -a rlogin=true san Enable san to login remotely chuser maxexpired = -1 Passwor never expairs for user} mkuser si Creates user si with default values in /usr/lib/security/mkuser.defalault mkuser su=false si Create user si without su facility rmuser si To remove user si rmuser -p si To remove user si and his all attributes who List users with tty nos and ip numbers who /var/adm/wtmp Lists history of login logout system startup and shutdowns who -r To list the run level who am i /who -m To list the current user mkgroup dcm To create the group dcm

chgroup users=u1,u2,u3 dcm rmgroup dcm chauthent

To add users u1 u2 and u3 to dcm group To delete the group dcm To change the authentication methods

Force a user to change their password on their next login: pwdadm -f ADMCHG username Note that this works with some sshd's and not others Subsystem Commands lssrc -a lssrc -h node1 -a lssrc -s kadmind lssrc -g tcpip mkssys rmssys -s kerberos chssys -s kerb -s kad startsrc -s kadmin startsrc -g tcpip stopsrc -s kadmin stopsrc -g tcpip refresh -s nfsd refresh -g tcpip Scheduling commands crontab -l crontab -e crontab -l > /si crontab -r crontab -v /var/adm/cron/cron.allow /var/adm/cron/cron.deny at -l at -r root.dfjdhjdh.21 /var/adm/cron/at.allow /var/adm/cron/at.deny batch atq joe ODM Commands odmget sm_menu_opt To get the objects from class sm_menu_opt odmget -q "id=licenses" sm_menu_opt To list objects that matches query id=licenses from object sm_menu_opt odmdelete -o sm_menu_opt -q "id=licenses" To list the status of all subsystems To list the status of all subsystems on foreign host node1 To list the status of the subsystem kadmind To get the status of the subsystem group tcpip To add a subsystem To remove the subsystem kerberos To rename the subsystem kerb to kad To start the subsystem kadmin To start the subsystem group tcpip To stop the subsystem kadmin To stop the subsystem group tcpip To refresh nfsd subsystem To refresh tcpip subsystem group

To list the crontab entries To edit the crontab entries To copies the entries of crontab to /si file To remove all crontab entries To list the submission time File containing users who allowed cron service File containing users denied cron service To list the jobs scheduled via at command To remove the scheduled job root.dfjdhjdh.21 File containing users who allowed at service File containing users denied at service To run the command when the system load permits To list all the jobs submitted by user joe

To delete the entries from class sm_menu_opt which agrees the query id=licenses odmshow sm_menu_opt To show the object class definition odmdrop -o sm_menu_opt To drop sm_menu_opt object class odmchange -o sm_menu_opt -q "id=licenses" file1 To change the attributes from file1

errpt To display complete summary of report errpt -a To list complete detailed report errpt -d H To list all hardware related errors errpt -d S To list all software related errors errpt -a -j 34564423 To list detailed error report of error id 34564423 chitab tty002:23:respawn:/usr/sbin/getty /dev/tty To enter the entry tty002:23:respawn:/usr/sbin/getty /dev/tty in inittab lssrc -g portmap To start tcpip Daemons of NIS Server ypserv yppasswd ypupdated Slave Server ypserv Client ypbind

NIS maps created by default (if file available on master server) MAP FILE NICK NAME passwd.byname passwd.byaddr group.byname group.byaddr hosts.byname hosts.byaddr ethers.byname ethers.byaddr networks.byname networks.byaddr rpc.bynumber services.byname protocols.byname /etc/passwd /etc/group /etc/hosts /etc/ethers /etc/networks /etc/rpc /etc/services /etc/protocols protocols passwd Group Hosts Ethers Networks

protocols.bynumber netgroup.byhost netgroup.byuser bootparams mail.aliases mail.byaddr publickey.byname netid.byname /etc/netgroup /etc/bootparams /etc/aliases /etc/publickey /etc/passwd /etc/group /etc/hosts /etc/netid /etc/netmasks Modifies nis domain name entry in /etc/rc.nfs Changes nis domain and modifies /etc/rc.nfs file Changes nis domain name to mca Changes nis domain name to mca until next reboot To make the machine NIS master (Options -O Overwrites existing maps -o prevents overwriting existing maps -E Exit on errors -e No exit on errors -P Starts yppasswdd daemon -p Dont start yppasswdd daemon -U Starts ypupdated daemon -u Dont start ypupdated daemon -C Starts ypbind daemon -c Dont start ypbind daemon -B Executes ypinit command and modifies rc.nfs Makes the machine as a client of mca server and starts ypbind aliases

netmasks.byaddr chypdom I mca chypdom B mca chypdom N mca domainname mca mkmaster

mkclient B S mca daemon ypcat passwd To cat the password map file passwd.byname ypcat x To display map nickname translation table ypcat d pci passwd To display the passwd file in the domain pci yppasswd To change the password of nis user lsmaster Display characteristics for the configuration of NIS master mrgpwd >/var/yp/passwd To merge /etc/passwd and /etc/security/passwd file to /var/yp/passwd ypxfr -h mca passwd.byname To transfer password map file from host mca Procedure for NIS Master Server

Change the nis domain name in the master server chypdom B mca or smit chypdom Verify tcpip is running by executing lssrc s inetd Verify portmap is running by executing lssrc s portmap (For security reason it is better to locate all nis files to /var/yp directory and change the DIR=/etc entry to DIR=/var/yp in the /var/yp/MakeFile. For merging the existing passwords execute mrgpwd > /var/yp/passwd) Execute mkmaster O E P U C B -O Overwrites existing maps for this domain -E Exist on errors when creating master server -P Starts yppasswdd daemon -U Starts ypupdated daemon -C Starts ypbind daemon -B Executes ypinit command, uncomment entries in rc.nfs and starts daemons Check the yp daemons with lssrc g yp Slave Server Change the nis domain name chypdom B mca Edit hosts file, keep entries for loopback, this machine and of server Execute mkslave O B C mca Client machine Change the nis domain name chypdom B mca Edit hosts file, and keep entries for loopback , this machine and of server Execute mkclient B mca Check for ypbind with lssrc s ypbind HACMP Commands logs /tmp/hacmp.out Detailed event script output logged in 7 day rolling history /var/adm/cluster.log High level view of cluster events (No clean up on this file) /usr/sbin/cluster/history/cluster.mmdd Day by day view of cluster events. (one file / day of month) /tmp/cm.log Clstrmgr messages /tmp/cspoc.log Output from C-SPOC commands (similar to smit.log) /tmp/emuhacmp.out Output from event emulation rdist -b -f /etc/disfile1 mode To distribute the files in disfile1 to all nodes in disfile1 in binary

Sample entry for disfile1 HOSTS = ( root@node1 root@node3 ) FILES = ( /etc/passwd /etc/security/passwd) ${FILES} -> ${HOSTS} clstart -m -s -b -i -l clstop -f -N clstop -g -N clstop -gr -N cldare -t cldare -t -f cldare -r cldare -r -f clverify cllscf cllsclstr cllsnode cllsnode -i node1 cllsdisk -g shrg shrg cllsnw cllsnw -n ether1 cllsif cllsif -n node1_service cllsvg cllsvg -g sh1 cllslv cllslv -g sh1 cllsdisk -g sh1 cllsfs cllsfs -g sh1 cllsnim cllsnim -n ether cllsparam -n node1 cllsserv claddclstr -i 3 -n dcm claddnode claddnim To start cluster daemons (m-clstrmgr, s-clsmuxpd, b-broadcast message, -i-clinfo, -l cllockd) To force shutdown cluster immediately without releasing resources To do graceful shutdown immediately with no takeover To do graceful shutdown immediately with takeover To sync the cluster toplogy To do the mock sync of topology To sync the cluster resources To do the mock sync of resources cluster verification utility To list clustur topology information To list the name and security level of the cluster To list the info about the cluster nodes To list info about node1 To list the PVID of the shared hard disk for resource group To list all cluster networks To list the details of network ether1 To list the details by network adapter To list the details of network adapter node1_service To list the shared vgs which can be accessed by all nodes To list the shared vgs in resource group sh1 To list the shared lvs To list the shared lvs in the resource group sh1 To list the PVID of disks in the resource group sh1 To list the shared file systems To list the shared file systems in the resource group sh1 Show info about all network modules Show info about ether network module To list the runtime parameters for the node node1 To list all the application servers To add a cluster definition with name dcm and id 3 To add an adapter To add network interface module

claddgrp -g sh1 -r cascading -n n1 n2To create resource group sh1 with nodes n1,n2 in cascade claddserv -s ser1 -b /usr/start -e /usr/stop Creates an application server ser1 with startscript as /usr/start and stop script as /usr/stop

clchclstr -i 2 -n dcmds To change cluster definitions name to dcmds and id to 2 clchclstr -s enhanced To change the clustur security to enhanced clchnode To change the adapter parameters clchgrp To change the resource group name or node relationship clchparam To change the run time parameters (like verbose logging) clchserv To change the name of app. server or change the start/end scripts clrmclstr clrmgrp -g sh1 clrmnim ether clrmnode -n node1 clrmnode -a node1_svc clrmres -g sh1 clrmserv app1 clrmserv ALL clgetactivenodes -n node1 from cluster clgetaddr node1 clgetgrp -g sh1 clgetgrp -g sh1 -f nodes clgetif with To remove the cluster definition To delete the resource group sh1 and related resources To remove the network interface module ether To remove the node node1 To remove the adapter named node1_svc To remove all resources from resource group sh1 To remove the application server app1 To remove all applicaion servers To list the nodes with active cluster manager processes manager on node node1 returns a pingable address from node node1 To list the info about resource group sh1 To list the participating nodes in the resource group sh1 To list interface name/interface device name/netmask associated

a specified ip label / ip address of a specific node clgetip sh1 To get the ip label associated to the resource group clgetnet 193.9.200.2 255.255.255.0 To list the network for ip 193.9.200.2, netmask 255.255.255.0 clgetvg -l nodelv To list the VG of LV nodelv cllistlogs To list the logs

clnodename -a node5 To add node5 to the cluster clnodename -o node5 -n node3 To change the cluster node name node5 to node3 clshowres clfindres Lists resources defined for all resource group To find the resource group within a cluster

xclconfig xhacmpm xclstat SP Commands Daemons hats hags haem hr pman

X utility for cluster configuration X utility for hacmp management X utility for cluster status

Topology services hatsd Group services hagsd Event management haemd Host responds hrd Problem management pmand,pmanrmd

( /usr/sbin/rsct/bin/hatsctrl script) (/usr/sbin/rsct/bin/hagsctrl script) (/usr/sbin/rsct/bin/haemctrl script) (/usr/sbin/rsct/bin/hrctrl script) (/usr/sbin/rsct/bin/pmanctrl script)

fault_service_Worm_RTG_SP (WORM) called by css_restart_node)

Switch daemon on nodes (/usr/lpp/ssp/rc.switch

kadmind The authentication database daemon for password changing and administration tools Listens port 751. It checks acl files admin.acl.(get,mod,add) in /var/kerberos/database /.k file for master key and /var/kerberos/databse/pricipal.pag, pricipal.dir for authentication database. kerberos Daemon that provides authentication services & ticket granting ticket for clients. kpropd Daemon to receive update for a secondary database server hardmon Daemon that monitors and controls the state of SP hardware It checks acl file /spdata/sys1/spmon/hmacls

install_cw

To complete PSSP installation on cws (Installs PSSP programs for SMIT panels Starts and configures SDR Sets node number 0 for cws in ODM Creates hmacls file with rood.admin entry in Starts and configure PSSP daemons

Configures default partition) setup_authent To setup workstation as SP authentication server (Creates /etc/krb.conf, /etc/krb.realms files Creates authentication database using kdb_edit command Create master key file /.k using kstash command Adds kadmin and kerberos to inittab file and starts them

Define initial auth. admin (eg:- root.admin) using kdb_edit command Creates Kerberos ACLS (admin_acl.get,mod,add files) Execute kinit for root.admin and creates local service principals (hardmon.cws, rcmd.cws) Creates /.klogin file and add admin principal to it Creates /etc/krb-srvtab file using ext_srvtab command) setup_server splst_versions -G -t spmon_ctest spmon_itest SYSMAN_test CSS_test To setup CWS as BIS To check the PSSP versions in all nodes To verify system monitor configured properly To verify system monitor installed properly & operational To verify the system management component To verify communication subsystem

SDR_test -l si To verify SDR and logs the errors in file si SDRListClasses To list the class name in the SDR SDRArchive si To backup SDR in the directory /spdata/sys1/sdr/archives with name backup...si sprestore_config backup...si To restore SDR and partion sensitive subsystems SDRGetObjects Syspar To get the system partition info SDRGetObjects syspar_map To get the system partition map (with node info) SDRGetObjects Adapter node_number netaddr To get the node number and net address in the Adapter class SDRDeleteObjects Adapter netaddr==193.9.200.227 To delete class Adapter with netaddr value 193.9.200.227 SDRChangeAttrValues Node node_number==9 bootp_response==install To change the boot response as install on node with node number 9 SDRWhoHasLock Returns the transaction ID of a lock on a specified class SDRClearLock To unlock an SDR class syspar_ctrl -G -A syspar_ctrl -G -D syspar_ctrl -R syspar_ctrl -E syspar_ctrl -s syspar_ctrl -k syspar_ctrl -r ngcreate -s 1:1 si ngcreate -n 1 2 3 si To add and restart all system partition sub systems To stop and delete all system partition sub systems To restore all system partition sub systems in current partition To list all system partition sub systems To start all system partition sub systems in current partition To stop all system partition sub systems in current partition To refresh all system partition sub systems in current partition To create node group si with 1st node in 1st frame To create node group si with 1st 2nd and 3rd nodes

ngcreate -N ng1,ng2 si ngcreate -w n1,n2 si ngcreate -ae n1,n2 si nglist nglist -G ngfind si ngnew si1 si2 si3 ngnew -G si1 si2 si3 ngresolve -G -n si ngresolve -w si ngresolve -d si ngdelete si si1 ngdelete -u si ngclean -Ga ngaddto si 1 2 ngaddto si 1 2 ng1 ngdelfrom si 1 2 ngdelfrom si 1 2 ng1 spled -G spled or spmon -L

To create node group si with node groups ng1 and ng2 To create node group si with host name n1 and n2 To create node group si with all nodes in the current partition excluding hosts n1 and n2 To list node groups in current partition To list node groups globally To find all node groups which contain node group si To create 3 node groups with names si1 si2 and si3 To create 3 node groups globally with names si1 si2 and si3 To resolve the nodes in the node group si as node numbers with global option To resolve the nodes in the node group si as fully qualified host name To resolve the nodes in the node group si as fully qualified ip address To remove node groups si and si1 To remove node group si but leave entries in other node groups which is having the entries in it To clean up all node groups To add nodes 1 and 2 to the existing node group si To add nodes 1,2 and node group ng1 to node group si To remove nodes 1 and 2 from node group si To remove nodes 1, 2 and node group ng1 from node group si To display leds of nodes in a multi partition system To display leds of nodes in the current partion

spmon -p off frame2/node3 To power off node3 in frame 2 spmon -p on frame2/node3 To power on node 3 in frame 2 spmon -G -p on frame2/node3 To power on node3/frame 2 if it is outside current partition spmon -k service /frame2/node3 To change the key settings to service spmon -p off frame1 To power off frame1 spmon -K frame1/node1 To see the key settings of frame1/node1 spmon -reset frame1/node1 To reset spmon -open frame1/node1 To open a tty on frame1/node1==(s1term -w 1 1) spmon -d To run the diag in the current partition spmon -G -d To run the diag globally hmmon -V 1:1 hmmon -Q -s 1:1 hmmon -q -s 1:1 hmreinit Displays a descriptive list of symbolic variable names Displays the state of node1 in frame 1 and exists Displays and monitors continuously To stop and restart hardmon

hmcmds -G off all To power off all hardware hmcmds -G off 1:3 To power off slot 3 in frame 1 hmcmds -G on 1:3 To power on slot 3 in frame 1 hmcmds -v -G boot_supervisor 1:1 To reset the power of node_supervisor card on slot 1 frame 1 (Use full to close the opened ttys on nodes) hmcmds secure l 1-3:2 To change the key in secure mode for slot 2 in frame 1 2 and 3 hmcmds -v synch_reset Perform sync reset. To clear the switch errors hmcmds -v power_on_reset Perform sync reset and do self test of switch chips cstartup -G all cstartup -N 1 2 4-8 cstartup -g si cstartup -GZ all are already cstartup -k all cstartup -E all cshutdown -F node1 cshutdown -h node1 cshutdown -g si cshutdown -G -N 1 3 4-7 cshutdown -X -N 1 2 3 hostlist -av hostlist -avd hostlist -dw node1 hostlist -N si hostlist -s 1-4:4 nodecond -n 1 1 nodecond 1 1 splstdata -h splstdata -i splstdata -v splstdata -t splstdata -b splstdata -n splstdata -s To startup all nodes globally To startup nodes 1,2 and 4 to 8 To startup node group si To startup all nodes. With Z it will restart the nodes which running (otherwise command will exit) To verify the startup with sequence file (StartSeq) To startup all nodes ignoring the sequence file To shutdown node1 immediately To halt the node node1 To shutdown the nodes in the node group si To shutdown nodes 1 3 and 4 to 7 regardless partition To shutdown nodes 1 2 and 3 ignoring sequence file To list sp host name which is active To list the hosts in ipaddress which are active Returns the ip of the node node1 List the host names in the node group si List the hostname of the node in 4th slot in frames 1-4 To get the ehternet address of the node 1 in frame 1 To network boot the node 1 in frame 1 To list the hardware info (equivalent to lscfg ) To list the network adapter data (equivalent to netstat -in) To list VG info on nodes To list extension node config To list boot install info To list node information To list node switch information

splstdata -d splstdata -p splstdata -e Efence Efence 193.9.1.2 193.9.1.5 Efence node1 node3 Efence -autojoin node1

To list file system info (equivalent to df) To list SP partition info To list the sp environment variables like ntp_config, amd_config To display all nodes fenced To fence nodes with ips 193.9.1.2 and 3 To fence nodes node1 and node3 To fence out but will unfence it after reboot To unfence nodes with ips 193.9.1.2 and 3 To unfence nodes node1 and node3

Eunfence 193.9.1.2 193.9.1.5 Eunfence node1 node3 Estart Estart -autounfence -0 Eunpartition delnimclient -l 1 2 3 master mknimclient -l 1 2 3 delnimmast -l 1 17 33 filesets mknimmast -l 1 17 33 lshacws ntpdate 90.1.2.1 spbootlist -l 1 2 nodecond 1 4 nodecond -n 1 4 sphrdwrad 1 3 2 setup_authent kdb_destroy create_krb_files krb-srvtab file ext_srvtab -n node1 ext_srvtab -n SPbgAdm

To start sp switch To start sp switch and turn off autounfence feature (1 for autounfence enabled) To prepare a system partition for repartitioning To delete nim client definition for nodes 1 2 and 3 from NIM To make node 1 2 and 3 as NIM clients To unconfigure nodes 1 17 and 33 as NIM masters and remove To make nodes 1 17 and 33 as NIM masters To list the status of the CWS Sets date and time by enquiring ntp server 90.1.2.1 To set the bootlist on nodes 1 and 2 To network boot the node 4 in frame 1 To fetch the ethernet address of node 4 in frame 1 To fetch mac address for node 3 and 4 in frame 1 To setup a cws to use kerberos authentication To destroy the kerberos database Searches for nodes in install/Customise mode and create for those nodes. (Creates in tftpboot directory of CWS.) To extract service key files from the database for instance node1 To extract service key files from the database for instance

SPbgAdm (Creates in the present directory with name -newsrvtab) spsetauth -d k4 std chauthpar k4 std kpasswd lsauthent k4init siju k4init -v siju k4init -i siju k4init -r siju k4init -l siju rcmdtgt local node k4list k4list -srvtab chkp -l 6 siju chkp -e 2001-5-23 siju lskp -p lskp -s lskp -c lskp siju abc rmkp siju rmkp -n siju rmkp -v siju kdb_edit kdb_edit -n kdb_util dump /si.bak kdb_util load /si.bak kdb_util new_master_key kadmin of kerberose kadmin ank kadmin cpw kadmin cap To set the authentication methods as k4 and standard To change the authentication methods as k4 and std To change the kerberos principals password To list the authentication table To get the kerberos ticket for principal siju To get the same as above but give verbose output To get the same but the machine will ask for the instance To get the same for a different realm (U can specify realm) To get the same for the life time in minutes which u specify To obtain a maximum life time ticket for rcmd services on To list the ticket cache and principals name To list the contents of the server key file To change the life time of the principal siju to 30 minutes (6 x 5) To change the expiry date of principal siju to 2001 may 23 To list the predefined kerberos principals To list the kerberos service principals To list the kerberos client principals To list the principals of siju and abc To remove the principal siju To remove the principal siju without prompting for confirmation To remove the principal with verbose output To change the attributes of the kerberos principals To avoid asking master key and get it from .k file To backup the kerberos database to si.bak file To restore the kerberos database from file si.bak. To change the master key To add,delete,see,change password,change admin passwd To add a new kerberos principal To change the password of a principal To change admin password

kadmin get kadmin dest kstash kdb_init

To get the details of a principal To destroy admin ticket To save the master key in the .k file To initialize the kerberos system

ksrvutil list To list the principals and version number in the server key file ksrvutil -f /etc/srvtab.bak list To list the principals in the file /etc/srvtab.bak ksrvutil change To change the key version in the default srvtab file ksrvutil delete To delete the keys in the /etc/krb-srvtab file ksrvutil -f /etc/srvtab.bak delete To delete the keys in the /etc/srvtab.bak file spacs_cntrl block user1 To block user1 on the node spacs_cntrl unblock user1 To unblock user1 spacs_cntrl deny user1 To deny user1 spacs_cntrl allow user1 To allow user1 spacs_cntrl -f /tmp/si deny To deny the list of the users in the file /tmp/si cw_allowed List of users to be allowed to login to CWS cw_restrict_login Script which will deny user to login to cws and allow them to change the passwd (files are /usr/lpp/ssp/config/admin directory and entry for second file will be in /etc/profile file) spmkuser id=1234 pgrp=system groups=system,bin home=node1:/home/siju siju To create SP user siju with id 1234, primary groups system, secondary groups system,bin and home directory home/siju of node1 sprmuser -ipr siju To remove the SP user siju (I for interactive, p for removing info from passwd file and r for removing the home directory) splsuser -c siju splsuser -f siju To list the attributes of sp user siju in column format To list the attributes of sp user siju in stanza format

spchuser groups=dev,system sh=/bin/ksh siju To change the shell to ksh and secondary groups to dev, system of SP user siju supper -v supper update supper status supper when supper where supper log supper rlog To go to the supper prompt in verbose mode To update all file collections To see the status of the file collections To list when last updation occured To show current servers for updation To show summary of last or current updation To show the details of last of current updation

supper file user.admin supper install siju supper remove siju supper update user.admin supper diskinfo

To list the files in the file collection user.admin To install the file collection siju To remove file collection siju To update file collection user.admin To show the diskspace and current VG

Procedure to Build a file collection with name siju for files in /home/siju 1) go to /var/sysman/sup 2) create dir siju 3) change ownership and group of siju to bin 4) copy contents of /var/sysman/sup/user.admin to siju 5) edit list file for including and omitting files in /home/siju directory It should contains entry like the following symlinkall upgrade ./home/siju omit ./home/siju/abc omitany ./home/siju/s* 6) Add a symbolic link to siju file in lists directory to list in siju directory ie ln -s /var/sysman/sup/siju/list /var/sysman/sup/lists/siju 7) Update /var/sysman/file.collections file with following entry primary siju - / - / EDO power no 8) Update sup.admin file collection to reflect the changes made to file.collections dsh -av supper update sup.admin 9) Install file collection siju in the nodes dsh -av supper install siju

sysctld /etc/sysctl.conf

Sysctl server daemon Sysctl configuration file

setauth -cmd svcconnect NONE To allow non kerberos users to execute sysctl commands (Entry in sysctl.conf file) setauth -cmd pdf {ACL /etc/si.acl} To change the acl file for pdf command to /etc/si.acl (Entry in sysctl.conf file) /etc/sysctl.acl Default acl file for sysctl

sysctl -h node1 Opens a sysctl command interface for node node1 sysctl -h node1 aclcheck siju To check entry for siju in the default acl file (sysctl.acl) sysctl -h node1 -f /etc/si.acl siju To check entry for siju in the acl file /etc/si.acl

sysctl -h node1 info commands To list the authorized commands for the current principal sysctl -h node1 acladd -p siju To add the principal siju to the default ACL file sysctl -h node1 -f /etc/si.acl acladd -p siju To add the principal siju to /etc/si.acl ACL file sysctl -h node1 acldelete -p siju To delete the principal siju to the default ACL file sysctl -h node1 -f /etc/si.acl acldelete -p siju To delete the principal siju to /etc/si.acl ACL file sysctl -h node1 acllist To list the entries in the default acl file sysctl -h node1 -f /etc/si.acl acllist To list the entries in /etc/si.acl file sysctl -h node1 aclcreate -p root.admin -p siju -f /etc/si.acl To create acl file /etc/si.acl with the entries root.admin and siju sysctl -h node1 checkauth -cmd pdf To check authorization for command pdf for the current user sysctl -h node1 confadd include /etc/si.acl To include the acl file si.acl in the sysctl.conf file sysctl -h node1 confdelete include /etc/si.acl To remove the acl file si.acl from sysctl.conf file sysctl -h node1 svcrestart To restart the sysctld daemon on node node1

Steps to create a Syctl application Task :- User siju (kerberos principal siju.adm) should get the permission to start a subsystem by executing the command substart. Permission should not be given to other users. 1) Create the client application substart in /usr/bin directory of cws with following contents if [ $# -gt 2 ] then echo "Arguments exceed the limit" exit 1 fi /usr/lpp/ssp/bin/hostlist -n $1 | /usr/bin/sysctl -c - substart_proc $2 In the above script if condition will check for the number of arguments and execute procedure on corresponding host 2) Change the mode to executable chmod 755 /usr/bin/substart

3) Create server application substart.tcl with a procedure substart_proc with following contents create proc substart_proc {SubSystem} AUTH { global SCUSER if [ aclcheck -f /etc/substart.acl $SCUSER ] { exec /etc/substart.srv $SubSystem return } } if condition in the above example checks for kerberos user in the acl file /etc/substart.acl If the condition is true it execute the command /etc/substart.srv with arguments passed by substart command 4) Create the script startsrc -s $2 This script execute the command startsrc with the argument passed by the substart command substart.srv with following contents

5)

Change the mode to executable chmod 755 /etc/substart.srv

6)

Create acl file substart.acl with the entry for user siju #acl# _PRINCIPAL siju.adm@CWS

7)

Add the application to the sysctl by adding following line to sysctl.conf file include /etc/substart.tcl

8)

Distribute the files to all nodes pcp -av /usr/bin/substart pcp -av /etc/substart.tcl pcp -av /etc/substart.srv pcp -av /etc/substart.acl pcp -av /etc/sysctl.conf Restart the sysctld daemon to get the new information on cws and on all nodes

9)

10)

Get the kerberos ticket for user siju and execute following command substart 3 lpd This should start the lpd daemon on node 3

11)

Try the above command with any other kerberos ticket. Result should be negative

NIM Commands nimconfig -a pif_name=en0 -a netname=net1 To initialise the NIM master with network name net1 nimconfig -r To rebuild /etc/niminfo file which contains the variables for NIM nim -o define -t lpp_source -a source=/dev/cd0 -a server=master -a location=/export/lpp_source/lpp_source1 lpp_source1 To define lpp_source1 image in /export/lpp_source/lpp_source directory from source cd0 nim -o define -t mksysb -a server=master -a location=/resources/mksysb.image mksysb1 To define mksysb resource mksysb1, from source /resources/mksysb.image on master nim -o remove inst_resource To remove the resource inst_resource nim -o check lpp_source1 To check the status of lpp_source lpp_source1 nim -o allocate -a spot=spot1 -a lpp_source=lpp_source1 node1 To allocate the resources spot1 and lpp_source1 to the the client node1 nim -o bos_inst node1 To initialise NIM for the BOS installation on node1 with the allocated resources nim -o dkls_init dcmds To initialize the machine dcmds as diskless operation nim -o dtls_init dcmds To initialize the machine dcmds for dataless operation nim -o cust dcmds To initialize the machine dcmds for customize operation nim -o diag dcmds To initialize the machine dcmds for diag operation nim -o maint dcmds To initialize the machine dcmds for maintenance operation nim -o define -t standalone -a platform=rspc -a if1="net1 dcmds xxxxx" -a cable_type1=bnc dcmds To define the machine dcmds as standalone with platform as rspc and network as net1 with cable type bnc and mac address xxxxx nim -o unconfig master

To unconfigure nim master master nim -o allocate -a spot=spot1 dcmds To allocate the resource spot1 from machine dcmds nim -o deallocate -a spot=spot1 dcmds To de allocate the resource spot1 from machine dcmds nim -o remove dcmds To remove machine dcmds after removing all resources associated to it nim -o reboot dcmds To reboot ther client dcmds nim -o define -t lpp_source -a location=/software/lpp1 -a server=master -a source=/dev/cd0 lpp1 To define lppsource lpp1 on master at /software/lpp1 directory from source device /dev/cd0 lsnim To list the nim resources lsnim -l dcmds To list the detailed info about the object dcmds lsnim -O dcmds To list the operation dcmds object can support lsnim -c resources dcmds To list the resources allocated to the machine dcmds nimclient The client version of nim command (User can obtain same results of nim in server )

Tape Drive Tasks Web-based System Manager: (Devices application) -ORTask List All Defined Tape Drives List All Supported Tape Drives SMIT Fast Command or File Path smit lsdtpe lsdev -C -c tape -H smit lsstpe lsdev -P -c tape -F "type subclass description" -H wsm devices fast path

Add New Tape Drives smit cfgmgr Automatically cfgmgr Add a User-Specified Tape smit addtpe mkdev -c tape -t '8mm' -s 'scsi' -p 'scsi0' -w Drive '4,0' -a extfm=yes Show Characteristics of a Tape Drive smit chgtpe lsdev -C -l rmt0 lsattr -D -l rmt0

Change Attributes of a Tape smit chgtpe chdev -l rmt0 -a block_size='512' -a Drive mode=no1 Remove a Tape Drive smit rmdev -l 'rmt0'1

rmvtpe dosrd: copy DOS file to AIX file # dosrd: reads DOS file from floppy and converts to AIX format with # specified directory/filename $1 dosread -a $1 $1 doswr: copy AIX file to DOS file # doswr: writes AIX file to floppy and converts to DOS format with # specified directory/filename $1 doswrite -a $1 $1 Clusters cath_node11:root:/# lssrc -g cluster Subsystem Group PID Status clstrmgrES cluster 19770 active clsmuxpdES cluster 22190 active clinfoES cluster 21940 active tail -f /tmp/hacmp.out|more cath_node11:root:/# tail -30 /tmp/hacmp.out|more EXPORTLIST= network_down_complete[91] [ -n ] network_down_complete[90] network_down_complete[90] odmget -q group=workflow_server1_int AND name=EXPORT_FILESYSTEM HACMPresource network_down_complete[90] grep value network_down_complete[90] awk {print $3} network_down_complete[90] sed s/"//g EXPORTLIST=/osmlocal_a network_down_complete[91] [ -n /osmlocal_a ] network_down_complete[93] [ REAL = EMUL ] network_down_complete[98] cl_update_statd cl_update_statd[91] [[ high = high ]] cl_update_statd[91] version=1.7 cl_update_statd[92] cl_update_statd[92] cl_get_path Cluster state Check the status of the cluster daemons by issuing lssrc -g cluster and lssrc -g lock. Run /usr/sbin/cluster/clstat to check the status of the cluster and the status of the network interfaces. Check the cluster log files with tail -f /tmp/hacmp.out, more /usr/sbin/cluster/history/cluster.mmdd (mmdd = current date), tail -f

/var/adm/cluster.log, and more /tmp/cm.log. Check that the nodename is correct (use odmget HACMPcluster). Verify that all the HACMP Configuration is synchronized. To check the state of the HACMP cluster nodes, you have to test the topology and configuration of your HACMP cluster. This is done by using the clverify command. The state of cluster can be found by using the /usr/sbin/cluster/clstat clstat - HACMP Cluster Status Monitor --------------------------------------------Cluster: cl_hacmp441 (1) Fri Oct 12 15:23:42 CDT 2001 State: UP Nodes: 2 SubState: STABLE Node: austin State: DOWN Interface: boot1 (0) Address: 192.168.1.11 State: DOWN Interface: austin_tty0 (1) Address: 0.0.0.0 State: DOWN Interface: austin_tmssa1 (2) Address: 0.0.0.0 State: DOWN Node: boston State: UP Interface: boston (0) Address: 192.168.1.20 State: UP Interface: boston_tty0 (1) Address: 0.0.0.0 State: UP Interface: boston_tmssa1 (2) Address: 0.0.0.0 find /proc/*/fd -type f -links 0 -exec ls -lh {} \; invalid pointing links rmfs (fs) Removes the file system and will also remove the LV if there are no onther file systems on it. Reports the fragment status of the file system. Runs in report only defrag mode (no action). Defragments a file system.

defrag -q (fs) defragfs -r (fs) defragfs (fs)

fsck (fs) Verify a file system, the file system must be unmounted! fsck (-y or -n) (fs) Pre-answer questions either yes or no ! fsck -p (fs) Will restore primary superblock from backup copy if the superblock is corrupt. Useful HACMP commands

clstat - show cluster state and substate; needs clinfo. cldump - SNMP-based tool to show cluster state cldisp - similar to cldump, perl script to show cluster state. cltopinfo - list the local view of the cluster topology. clshowsrv -a - list the local view of the cluster subsystems. clfindres (-s) - locate the resource groups and display status. clRGinfo -v - locate the resource groups and display status. clcycle - rotate some of the log files. cl_ping - a cluster ping program with more arguments. clrsh - cluster rsh program that take cluster node names as argument. clgetactivenodes - which nodes are active? get_local_nodename - what is the name of the local node? clconfig - check the HACMP ODM. clRGmove - online/offline or move resource groups. cldare - sync/fix the cluster. cllsgrp - list the resource groups. clsnapshotinfo - create a large snapshot of the hacmp configuration. cllscf - list the network configuration of an hacmp cluster. clshowres - show the resource group configuration. cllsif - show network interface information. cllsres - show short resource group information. lssrc -ls clstrmgrES - list the cluster manager state. lssrc -ls topsvcs - show heartbeat information. cllsnode - list a node centric overview of the hacmp configuration. LPAR uname L Use the uname command to obtain information about the system in relation to the LPAR. > uname -L -1 NULL The "-1" indicates that the system is not running with any logical partitions, but is running in full system partition mode. The following example demonstrates how the uname command provides the partition number and the partition name as managed by the HMC: > uname -L 3 Web Server Knowing that the application is running in an LPAR can be helpful when you are assessing slight performance differences. CHFS EXAMPLES 1. To change the file system size of the /test Journaled File System, enter:

chfs -a size=24576 /test This command changes the size of the /test Journaled File System to 24576 512-byte blocks, or 12MB (provided it was previously no larger than this).

2.

To increase the size of the /test Journaled File System, enter:

chfs -a size=+8192 /test This command increases the size of the /test Journaled File System by 8192 512-byte blocks, or 4 MB. 3. 4. To convert a JFS2 file system to a version which can support NFS4 ACLs, type: To change the mount point of a file system, enter: chfs -a ea=v2 /test chfs -m /test2 /test This command changes the mount point of a file system from /test to /test2. 5. To delete the accounting attribute from a file system, enter: chfs -d account /home This command removes the accounting attribute from the /home file system. The accounting attribute is deleted from the /home: stanza of the /etc/filesystems file. 6. To split off a copy of a mirrored file system and mount it read-only for use as an online backup, enter: chfs -a splitcopy=/backup -a copy=2 /testfs This mount a read-only copy of /testfs at /backup. 7. To change the file system size of the /test Journaled File System, enter: chfs -a size=64M /test This command changes the size of the /test Journaled File System to 64MB (provided it was previously no larger than this). 8. To reduce the size of the /test JFS2 file system, enter: chfs -a size=-16M /test This command reduces the size of the /test JFS2 file system by 16MB. 9. To freeze a file system, enter: chfs -a freeze=60 /adl This command freezes the /adl file system for a maximum of 60 seconds. 10. To thaw a file system, enter: chfs -a freeze=off /zml This command thaws the /zml file system.