AIRMOVERS (AIR AMPLIFIERS) - · PDF fileairmovers (air amplifiers) brauer air products brauer...
Transcript of AIRMOVERS (AIR AMPLIFIERS) - · PDF fileairmovers (air amplifiers) brauer air products brauer...
ISO 9002Certificate No: FM13674
AIRMOVERS(AIR AMPLIFIERS)
BRAUERAIR PRODUCTS
BRAUERAIR PRODUCTS
BRAUERAIR PRODUCTS
BRAUERAIR PRODUCTS
BRAUERAIR PRODUCTS
BRAUERAIR PRODUCTS
BRAUERAIR PRODUCTS
BRAUERAIR PRODUCTS
BRAUERAIR PRODUCTS
BRAUERAIR PRODUCTS
Since 1926, Brauer has been providing industry with the finest engineeredproducts, expert technical support, on time deliveries and unparalleled customerservice. Our brands are now recognised world-wide as products of the highest quality,and the breadth of our product portfolio provides our demanding customers with atooling solution for a wide variety of problems.
Brauer continues to be committed to bringing new innovative tooling products tothe market place, and to updating and improving existing product ranges whereverpossible. This new Brauer Airmover (air amplifier) catalogue updates our longstanding, and successful range of airmovers which have led the market for over 30years. In addition, this catalogue introduces a large number of innovative additions toour airmover range, all designed and manufactured to the very highest standards.
Our team of highly talented engineers is backed by the latest computer aideddesign facilities including three dimensional feature based parametric solid modelling.Manufacturing is carried out in our modern, well equipped factory accredited with ISO9002 certification and situated in Milton Keynes, some 40 miles north of London.
At Brauer, we continue to be motivated by working with our customers in providinginnovative solutions for their particular tooling requirements. These workingpartnerships, built by many years of unparalled customer service, will ensure thatBrauer branded tooling, and airmovers in particular, will remain at the forefront oftheir markets.
To view the complete tooling portfolio manufactured by the Brauer companies,please consult our Web Site at www.Brauer.co.uk.
A
I
R
M
O
V
E
R
S
If, after considering our standard range of product, youare unable to find a solution to suit your particularapplication, then please consult our sales and designengineers who will be only too pleased to consider thedesign and manufacture of a bespoke specially designeditem to meet your particular needs.
SPECIAL PRODUCTS TO SUIT YOUR PARTICULAR NEEDS
For further details of any Brauer Productcontact
HMC BRAUER LIMITEDDAWSON ROAD, MOUNT FARM, MILTON KEYNES, ENGLAND MK1 1JP
TEL: 00 44(0)1908-374022 FAX: 00 44(0)1908-641628email: [email protected] Web: www.brauer.co.uk
© HMC Brauer Ltd 1999No part of this publication may be reproduced in any form (including photocopying or storing
in any medium by electronic means) without the written permission of HMC Brauer Ltd.
HMC-Brauer Limited reserve the right to change the design or specification of the products shownin this catalogue without prior notification.
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
AIR MOVERS EXPLAINED
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S1
INDEX Page No
1
2
3
5
6
7
4
Supply Air (Vi)
Entrained Air
OutputAir
(Vo)Induced air
AIR MOVERS - Fixed
- Adjustable
- Stainless
- Acetal
STRIP AIRMOVERS
TRIGGER ACTION BLOW GUNS
REVERSIBLE AIR GUNS
AIRMISER NOZZLES
EASY CLEAN DRUM PUMP
VORTEX TUBES
COLD AIR GUNS
EXTRACTOR VENTILATORS
2 - 3
4 - 7
8 - 11
12 - 15
16 - 19
24 - 26
20 - 23
27 - 28
29 - 30
31 - 32
33 - 34
35 - 36
37 - 41
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S2
If you are looking to convey light materials, extract fumes, smoke or air, or simply cooldown a hot area of a product quickly then airmovers provide a simple, cost effectivemeans of achieving your aim. Using the energy from a small volume of compressedair (supplied from a standard compressor) an airmover amplifies surrounding air tohigh volume, low pressure output airflow using the coanda effect.
Airmovers are extremely quiet and efficient and can amplify compressed air input upto 100 times allowing increased airflow while substantially reducing compressed airconsumption.
Compressed air flows from the supply inlet (1) into an annular chamber (2).The supply air is throttled by an annular gap (3) and the resultant thin layer of highvelocity air adheres to the profile (4) which turns the flow through 90° to pass downthe bore.The action of the high velocity supply air flowing over the profile causes a pressuredrop which induces large volumes of ambient air (5).This induced flow is augmented, and gains velocity, by contact with the supply air flowthrough the bore of the unit.When an Airmover is used without output ducting, the high volume flow of supply andinduced air from the bore entrains further ambient air.The final ratio of supply (free) air volume to output volume (induced + supply +entrained air) can exceed 100:1.
How Airmovers Work
An airmover is an air flow amplifier — it uses the energy from a small volume ofcompressed air (from the normal shop supply) to produce a high velocity, highvolume, low pressure output airflow.
1
2
3
5
6
7
4
Vi = Volume of supply air (free air at atmospheric pressure)Vo = Volume output, ducted
= Vi + Induced airVo = Volume output, unducted
= Vi + Induced air + Entrained air
Supply Air (Vi)
Entrained Air
OutputAir
(Vo)Induced air
AIRMOVERS EXPLAINED
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S3
Airmovers have the following features and characteristics:-
★ They have no moving parts and are very safe
★ When used with an effective filter they require no maintenance
★ They are quiet in operation
★ They have unobstructed bores
★ Their output is variable by regulation of the supply air
★ They can be instantly stopped or started
★ No combustion hazard
★ No electrical interference
★ Both the inlet and outlet stages can be ducted, allowing fresh air to bedrawn in, for the removal of fumes or conveying of small particles
★ More compact, simple, lightweight and portable
★ Driven by air, not electricity
★ No moving parts – hence safer and maintenance free
★ Each end can be ducted
AIRMOVER ADVANTAGES
ADVANTAGES OVER FANS
★ Drying wet surfaces
★ Drying water based combustible paints
★ Blowing off and cleaning mechanical parts
★ Cooling heat in moulds and ovens
★ Extracting smoke and fumes e.g. in welding
★ Venting fumes in tanks e.g. in ship cargo holds
SOME SIMPLE AIRMOVER APPLICATIONS
FOR FURTHER TECHNICAL DATA AND INFORMATION ON FLOW RATESPLEASE CONTACT BRAUER TECHNICAL SALES DEPARTMENT.
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S4
FIXED GAP AIRMOVERS
SOME TYPICAL APPLICATIONS – AIRMOVERS/AIR AMPLIFIERS
BRAUER has been the leading manufacturer of fixed gap airmovers for 30 years,and these products form the core of our airmover product range. Othermanufacturers have copied these products – a compliment to our air moverengineering design and success.
Our range of inexpensive fixed gap airmovers should provide a solution for thegreat majority of possible applications. However, our design engineers continue todevelop our range, and we are also prepared to consider, the design andmanufacture of special products to meet the customers specific requirements.
METALWORKING - GRINDINGA model AM40 airmover boosts a
vacuum system negating the need fora larger, more expensive ventilation
system to remove grinding dust.
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaDRYING ENAMEL BASED PAINTSSide mounted AM40 airmover dryingenamel paint on a radiatormanufacturing line.
DRYING WATER BASED PAINTSRoof mounted AM35 airmovers drying
environmentally friendly water based paints inauto body shops or assembly lines.
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S5
58.0mm
10.0mm
33.0mm
5.0mm
18.5mm
45.0mm
∅ 5.0mm
17.0mm
55.5mm
1⁄8" BSP
0.16mm15.00mm
∅ 25.0mm
FIXED GAP AIRMOVER MODEL - AM10
Material: Zinc alloy.
Weight: 0.100 Kg
Standard Gap: 0.05mm
DBA at: 5.5 bar is 72
Shims: 0.04, 0.05, 0.08mmOptional Extra
Standard Inlet Thread: !/8" BSP
Options: !/8" NPTPlease specify on order !/8" NPTF
∅ 38.0mm
15.0mm 5.0mm
25.0mm
31.0mm
1⁄4" BSP
70.0mm
FIXED GAP AIRMOVER MODEL - AM20
Performance at Outlet
Vo
lum
e (m
3 /m
in) 1.0
0.8
0.6
0.4
0.2
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
▲
▲
▲
▲
■ ■■ ■
Input Volume Ouput Volume■ ▲
Performance at Outlet
Vo
lum
e(m
3/m
in) 4.0
3.0
2.0
1.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
Input Volume Output Volume
◆
◆
◆
◆
◆
▲ ▲ ▲ ▲
▲
Material: Zinc alloy.
Weight: 0.250 Kg
Standard Gap: 0.05mm
DBA at: 5.5 bar is 79
Shims: 0.04, 0.05, 0.08mmOptional Extra
Standard Inlet Thread: !/4" BSP
Options: !/4" NPTPlease specify on order !/4" NPTF
Bar Vol in Vol outm3/min m3/min
1.38 0.048 0.4902.76 0.065 0.6604.14 0.125 0.7335.52 0.164 0.886
77.0mm
∅ 7.0mm
∅ 38.0mm
20.0mm
47.0mm
26.5mm15.0mm 5.0mm
25.0mm
70.0mm
61.0mm
10.0mm
1⁄4" BSP
Bar Vol in Vol outm3/min m3/min
1.38 0.105 1.6142.76 0.164 2.4924.14 0.224 3.0305.52 0.286 3.681
∅ 18.5mm
31.0mm
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S6
Performance at Outlet
Vol
ume
(m3 /
min
) 6.0
5.0
4.0
3.0
2.0
1.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
INPUT VOLUME OUTPUT VOLUME ◆
◆ ◆◆
◆
Material: Zinc alloy and aluminium.
Weight: 0.19Kg
Standard Gap: 0.05mm
DBA at: 5.5 bar is 80
Shims: Not required
Standard Inlet Thread: #/8" BSP
Options: #/8" NPTPlease specify on order #/8" NPTF
Material: Zinc alloy.
Weight: 0.900 Kg
Standard Gap: 0.05mm
DBA at: 5.5 bar is 80
Shims: 0.04, 0.05, 0.08mmOptional extra
Standard Inlet Thread: #/8" BSP
Options: #/8" NPTPlease specify on order #/8" NPTF
∅63
mm
∅52
mm
74mm
60mm
40mm
3⁄8" BSP
∅ 50mm
∅ 35mm
MODEL - AM35 FIXED GAP AIRMOVER
MODEL - AM40 FIXED GAP AIRMOVER
∅ 75.0mm
20.0mm 7.0mm
32.0mm
94.0mm
3⁄8" BSP
∅ 51.0mm
Bar Vol in Vol outm3/min m3/min
1.38 0.193 2.3502.76 0.326 3.3614.14 0.484 4.6215.52 0.631 5.207
Performance at Outlet
Vol
ume
(m3 /
min
) 10.0
8.0
6.0
4.0
2.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
INPUT VOLUME OUTPUT VOLUME ◆
◆ ◆ ◆ ◆
Bar Vol in Vol outm3/min m3/min
1.38 0.207 3.2562.76 0.323 5.1824.14 0.439 6.5135.52 0.555 8.297
105.0mm
91.0mm
20.0mm
∅ 40.0mm
80.0mm
∅ 7.0mm 43.5mm
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S7
Bar Vol in Vol outm3/min m3/min
1.38 1.982 38.9362.76 3.115 53.6604.14 4.276 68.6685.52 5.324 80.137
FIXED GAP AIRMOVER MODEL - AM75
FIXED GAP AIRMOVER MODEL - AM125
∅ 125.0mm
30.0mm
14.0mm 1⁄2" BSP
∅ 101.0mm
89.0mm180.0mm
∅ 75.0mm
175.0mm
215.0mm
∅ 13.5mm
150.0mm
20.0mm
425.0mm
∅ 198.0mm
80.0mm
Material: Zinc alloy.
Weight: 2.7Kg
Standard Gap: 0.05mm
DBA at: 5.5 bar is 80
Shims: Not required
Standard Inlet Thread: !/2" BSP
Options: !/2" NPTPlease specify on order !/2" NPTF
Performance at Outlet
Volu
me
(m3 /
min
) 20.0
15.0
10.0
5.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
Input Volume Output Volume
◆ ◆ ◆ ◆
◆
Bar Vol in Vol outm3/min m3/min
1.38 0.425 6.2302.76 0.651 9.2034.14 0.906 12.0355.52 1.133 14.866
3⁄4" BSP
264.0mm
181.0mm
200mm
∅ 125.0mm
∅ 180.0mm
Performance at Outlet
Volu
me
(m3 /
min
) 100.0
80.0
60.0
40.0
20.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
Input Volume Output Volume
▲
▲
▲
▲
▲
Material: Aluminium alloy.
Weight: 7.55Kg
Standard Gap: 0.15mm
DBA at: 5.5 bar is 85
Shims: Not required
Standard Inlet Thread: #/4" BSP
Options: #/4" NPTPlease specify on order #/4" NPTF
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S8
In some applications, the engineer must be able to vary the volume of outlet air.Brauer adjustable airmovers incorporate air gaps which are not fixed, instead thegap can be varied by loosening the knurled ring and adjusting the sleeveaccordingly. The result is that air consumption can be minimised and outputvolumes varied from a light blow to a blast of high volume air. When the desired airflows are obtained, the knurled ring can be locked into position. In most instances,the ideal air gap will be between 0.05mm and 0.10mm (.002” to .004”)
The Brauer standard range of adjustable airmovers are manufactured in ourfactory from aluminium. Stainless steel versions are also available when theapplication requires (see page 12)
Optional mounting rings and magnetic base are available (see page 19).
ADJUSTABLE AIRMOVERS
SOME TYPICAL APPLICATIONS – ADJUSTABLE AIRMOVERS
SCRAP REMOVAL ONTEXTILES
Two model AM10A airmoverseliminate expensive vacuums and
electric motors for trimming removal. Airmoverswith no moving parts, remove the overheating
problems inherent in electric motors.
WOODWORKING -SAWDUST REMOVAL
AM60A airmovers used on thisrouter eliminate the sawdust problem by
boosting the vacuum system.
∅ 38.0mm
12.0mm19.0mm
74.5mm
∅ 20.0mm1⁄4" BSP
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S9
ADJUSTABLE AIRMOVER MODEL - AM10A
ADJUSTABLE AIRMOVER MODEL - AM20A
∅ 35mm
33m
m
∅ 25mm
∅10
mm
73mm
30mm 18mm
10mm1⁄8" BSP
∅20
mm
∅30
mm
Material: Aluminium alloy.
Weight: 0.09Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 73
Shims: Not Applicable
Standard Inlet Thread: !/8" BSP
Options: !/8" NPTPlease specify on order !/8" NPTF
Performance at Outlet
Vo
lum
e (m
3 /m
in) 1.0
0.8
0.6
0.4
0.2
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
▲
▲
▲
▲
■ ■■ ■
Input Volume Ouput Volume■ ▲
Performance at Outlet
Vo
lum
e(m
3/m
in) 4.0
3.0
2.0
1.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
Input Volume Output Volume
◆
◆
◆
◆
◆
▲ ▲ ▲ ▲
▲
Material: Aluminium alloy.
Weight: 0.13Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 79
Shims: Not Applicable
Standard Inlet Thread: !/4" BSP
Options: !/4" NPTPlease specify on order !/4" NPTF
Bar Vol in Vol outm3/min m3/min
1.38 0.048 0.4902.76 0.065 0.6604.14 0.125 0.7335.52 0.164 0.886
Press in Vol in Vol outbar m3/min m3/min1.38 0.105 1.6142.76 0.164 2.4924.14 0.224 3.0305.52 0.286 3.681
∅ 38.0mm
∅30
.0m
m
43.3
mm
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S10
MODEL - AM35A ADJUSTABLE AIRMOVER
MODEL - AM60A ADJUSTABLE AIRMOVER
∅ 68mm
∅ 35mm3⁄8" BSP
∅58
mm
∅49
mm
80mm
Performance at Outlet
Vol
ume
(m3 /
min
) 6.0
5.0
4.0
3.0
2.0
1.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
INPUT VOLUME OUTPUT VOLUME ◆
◆ ◆◆
◆
Material: Aluminium alloy.
Weight: 0.28Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 80
Shims: Not Applicable
Standard Inlet Thread: #/8" BSP
Options: #/8" NPTPlease specify on order #/8" NPTF
Bar Vol in Vol outm3/min m3/min
1.38 0.193 2.3502.76 0.326 3.3614.14 0.484 4.6215.52 0.631 5.207
Material: Aluminium alloy.
Weight: 0.83Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 80
Shims: Not Applicable
Standard Inlet Thread: #/8" BSP
Options: #/8" NPTPlease specify on order #/8" NPTF
Performance at Outlet
Volu
me
(m3 /
min
) 12.0
10.0
8.0
6.0
4.0
2.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
Input Volume Output Volume
◆
▲ ▲ ▲ ▲
◆
◆
◆
▲ ◆
Bar Vol in Vol outm3/min m3/min
1.38 0.280 4.1912.76 0.476 7.5614.14 0.654 9.2315.52 0.841 11.327
∅ 115.5mm
114m
m
∅ 60mm
∅90
mm
∅76
mm
∅95
mm
3⁄8" BSP
95mm
46mm
26mm
16mm
∅58
mm
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S11
ADJUSTABLE AIRMOVER MODEL - AM75A
Material: Aluminium alloy.
Weight: 1.5Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 80
Shims: Not Applicable
Standard Inlet Thread: !/2" BSP
Options: !/2" NPTPlease specify on order !/2" NPTF
Performance at Outlet
Volu
me
(m3 /
min
) 20.0
15.0
10.0
5.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
Input Volume Output Volume
◆ ◆ ◆ ◆
◆
Bar Vol in Vol outm3/min m3/min
1.38 0.425 6.2302.76 0.651 9.2034.14 0.906 12.0355.52 1.133 14.866
∅11
2mm
∅96
mm
1⁄2" BSP
132mm
53mm
32mm
∅ 135mm
133m
m
∅11
8mm
∅ 75mm
ADJUSTABLE AIRMOVER MODEL - AM125A
∅18
6mm
∅17
5mm
∅17
5mm
197m
m
3⁄4" BSP
225mm
85mm
60mm
Bar Vol in Vol outm3/min m3/min
1.38 1.982 38.9362.76 3.115 53.6604.14 4.276 68.6685.52 5.324 80.137
Performance at Outlet
Volu
me
(m3 /
min
) 100.0
80.0
60.0
40.0
20.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
Input Volume Output Volume
▲
▲
▲
▲
▲
Material: Aluminium Alloy.
Weight: Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is
Shims: Not applicable
Standard Inlet Thread: #/4" BSP
Options: #/4" NPTPlease specify on order #/4" NPTF
∅ 199mm
∅ 125mm
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S12
Airmover applications can exist even in the most hazardous of environments.Alternatively, the hygiene requirements of the food, pharmaceutical and otherindustries require product friendly tooling. In all of these extremes, stainless steelairmovers can offer a very viable solution. Our range is supplied to demandingcustomers wordwide and comes with an adjustable airgap.
So should your air amplifier be required to resist corrosive environments or befood product friendly, then Brauer has a stainless steel adjustable airmover to meetyour needs.
Note: We also manufacture adjustable airmovers in acetal and in certainapplications these may be a suitable alternative to stainless steel (See page 16)
Optional mounting rings and magnetic base are available (see page 19).
STAINLESS STEEL ADJUSTABLE AIRMOVERS
SOME TYPICAL APPLICATIONS – STAINLESS STEEL ADJUSTABLE AIRMOVERS
EXTRUSION - RUBBER MOULDINGCOOLING AND DRYING
Model SS75A stainless airmovers help set-upand cool this moulding after extrusion. Then blow
off and dry the moulding prior to forming.
METALWORKING -COOLANT MIST REMOVAL
CNC machine with doors closed, oily mistoften escapes to surrounding areas. The
SS40A airmover solves the problem, withoutfailure of electric motor or vacuum.
LENS MANUFACTURESS20A’s used to cool optical lensesduring manufacture.
30mm
∅20
mm
∅30
mm
∅ 35mm
∅ 25mm
∅10
mm
30m
m
10mm
18mm
73mm
1⁄8" BSP
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S13
STAINLESS STEEL ADJUSTABLE AIRMOVER MODEL - SS10A
STAINLESS STEEL ADJUSTABLE AIRMOVER MODEL - SS20A
∅38
.0m
m
∅ 30.0mm
12.0mm 19.0mm
74.5mm1⁄4" BSP∅ 20.0mm
∅20
.0m
m
∅43
.3m
m
∅ 38.0mm
∅ 44.5mm
Material: Stainless Steel.
Weight: 0.27Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 72
Shims: Not Applicable
Standard Inlet Thread: !/8" BSP
Options: !/8" NPTPlease specify on order !/8" NPTF
Performance at Outlet
Vo
lum
e (m
3 /m
in) 1.0
0.8
0.6
0.4
0.2
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
▲
▲
▲
▲
■ ■■ ■
Input Volume Ouput Volume■ ▲
Bar Vol in Vol outm3/min m3/min
1.38 0.048 0.4902.76 0.065 0.6604.14 0.125 0.7335.52 0.164 0.886
Performance at Outlet
Vo
lum
e(m
3/m
in) 4.0
3.0
2.0
1.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
Input Volume Output Volume
◆
◆
◆
◆
◆
▲ ▲ ▲ ▲
▲
Material: Stainless Steel.
Weight: 0.39Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 78
Shims: Not Applicable
Standard Inlet Thread: !/4" BSP
Options: !/4" NPTPlease specify on order !/4" NPTF
Bar Vol in Vol outm3/min m3/min
1.38 0.105 1.6142.76 0.164 2.4924.14 0.224 3.0305.52 0.286 3.681
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S14
MODEL - SS40A STAINLESS STEEL ADJUSTABLE AIRMOVER
MODEL - SS60A STAINLESS STEEL ADJUSTABLE AIRMOVER
∅ 63.5mm
68.5
mm
∅ 50.0mm
15.0mm∅ 40.0mm
∅ 70.0mm
24.0mm
98.0mm3⁄8" BSP
∅90
mm
∅76
mm
∅95
mm
3⁄8" BSP
95mm
46mm
26mm
Material: Stainless Steel.
Weight: 0.84Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 80
Shims: Not applicable
Standard Inlet Thread: #/8" BSP
Options: #/8" NPTPlease specify on order #/8" NPTF
Performance at Outlet
Vol
ume
(m3 /
min
) 10.0
8.0
6.0
4.0
2.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
INPUT VOLUME OUTPUT VOLUME ◆
◆ ◆ ◆ ◆
Bar Vol in Vol outm3/min m3/min
1.38 0.207 3.2562.76 0.323 5.1824.14 0.439 6.5135.52 0.555 8.297
Material: Stainless Steel.
Weight: 2.5Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 80
Shims: Not Applicable
Standard Inlet Thread: #/8" BSP
Options: #/8" NPTPlease specify on order #/8" NPTF
Performance at Outlet
Volu
me
(m3 /
min
) 12.0
10.0
8.0
6.0
4.0
2.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
Input Volume Output Volume
◆
▲ ▲ ▲ ▲
◆
◆
◆
▲ ◆
Bar Vol in Vol outm3/min m3/min
1.38 0.280 4.1912.76 0.476 7.5614.14 0.654 9.2315.52 0.841 11.327
∅ 111.5mm
∅ 60mm
114m
m
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S15
STAINLESS STEEL ADJUSTABLE AIRMOVER MODEL - SS75A
STAINLESS STEEL ADJUSTABLE AIRMOVER MODEL - SS125A
∅11
2mm
∅96
mm
∅11
8mm
133m
m
1⁄2" BSP
132mm
53mm
32mm
∅18
6mm
∅17
5mm
∅17
5mm
197m
m
3⁄4" BSP
225mm
85mm
60mm
Bar Vol in Vol outm3/min m3/min
1.38 1.982 38.9362.76 3.115 53.6604.14 4.276 68.6685.52 5.324 80.137
Material: Stainless Steel.
Weight: 4.5Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 81
Shims: Not applicable
Standard Inlet Thread: !/2" BSP
Options: !/2" NPTPlease specify on order !/2" NPTF
Performance at Outlet
Volu
me
(m3 /
min
) 20.0
15.0
10.0
5.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
Input Volume Output Volume
◆ ◆ ◆ ◆
◆
Bar Vol in Vol outm3/min m3/min
1.38 0.425 6.2302.76 0.651 9.2034.14 0.906 12.0355.52 1.133 14.866
Performance at Outlet
Volu
me
(m3 /
min
) 100.0
80.0
60.0
40.0
20.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
Input Volume Output Volume
▲
▲
▲
▲
▲
Material: Stainless Steel.
Weight: 16.3Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 85
Shims: Not applicable
Standard Inlet Thread: #/4" BSP
Options: #/4" NPTPlease specify on order #/4" NPTF
∅ 135mm
∅ 75mm
∅ 199mm
∅ 125mm
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S16
As with our stainless steel range of airmovers, Brauer has developed a uniquerange of acetal, adjustable airmovers. Again these products are corrosion resistantand impervious to a wide range of chemical attack. Being extremely lightweight,these airmovers may, in certain situations, be more suitable than much heavierstainless steel.
Optional mounting rings and magnetic base are available (see page 19).
ACETAL ADJUSTABLE AIRMOVERS
SOME TYPICAL APPLICATIONS – ACETAL ADJUSTABLE AIRMOVERS
FOOD -CAN OR BOTTLE DRYING
Model AA75A acetal airmovers drying alltypes of products at various stages of
production, i.e. after sterilising, prior to ink jetmarking or labelling.
PHARMACEUTICALSAA40A airmover used to extract unfilled
capsules as they pass on a conveyor.
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S17
ACETAL ADJUSTABLE AIRMOVER MODEL - AA10A
ACETAL ADJUSTABLE AIRMOVER MODEL - AA20A
Material: Acetal Copolymer
Weight: 0.05Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 72
Shims: Not applicable
Standard Inlet Thread: !/8" BSP
Options: !/8" NPTPlease specify on order !/8" NPTF
Performance at Outlet
Vo
lum
e (m
3 /m
in) 1.0
0.8
0.6
0.4
0.2
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
▲
▲
▲
▲
■ ■■ ■
Input Volume Ouput Volume■ ▲
Bar Vol in Vol outm3/min m3/min
1.38 0.048 0.4902.76 0.065 0.6604.14 0.125 0.7335.52 0.164 0.886
Performance at Outlet
Vo
lum
e(m
3/m
in) 4.0
3.0
2.0
1.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
Input Volume Output Volume
◆
◆
◆
◆
◆
▲ ▲ ▲ ▲
▲
Material: Acetal Copolymer
Weight: 0.08Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 78
Shims: Not applicable
Standard Inlet Thread: !/4" BSP
Options: !/4" NPTPlease specify on order !/4" NPTF
Bar Vol in Vol outm3/min m3/min
1.38 0.105 1.6142.76 0.164 2.4924.14 0.224 3.0305.52 0.286 3.681
∅ 35mm
33m
m
∅ 25mm
∅10
mm
73mm
30mm 18mm
10mm1⁄8" BSP
∅20
mm
∅30
mm
∅ 38.0mm ∅ 30.0mm
12.0mm19.0mm
74.5mm1⁄4" BSP∅ 20mm
∅ 44.5mm
43.3
mm
∅ 115.5mm
∅ 60mm
∅90
mm
∅76
mm
3⁄8" BSP
95mm
46mm
26mm
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S18
MODEL - AA40A ACETAL ADJUSTABLE AIRMOVER
MODEL - AA60A ACETAL ADJUSTABLE AIRMOVER
Material: Acetal Copolymer
Weight: 0.20Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 80
Shims: Not applicable
Standard Inlet Thread: #/8" BSP
Options: #/8" NPTPlease specify on order #/8" NPTF
Performance at Outlet
Vol
ume
(m3 /
min
) 10.0
8.0
6.0
4.0
2.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
INPUT VOLUME OUTPUT VOLUME ◆
◆ ◆ ◆ ◆
Bar Vol in Vol outm3/min m3/min
1.38 0.207 3.2562.76 0.323 5.1824.14 0.439 6.5135.52 0.555 8.297
Material: Acetal Copolymer
Weight: 0.73Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 80
Shims: Not applicable
Standard Inlet Thread: #/8" BSP
Options: #/8" NPTPlease specify on order #/8" NPTF
Performance at Outlet
Volu
me
(m3 /
min
) 12.0
10.0
8.0
6.0
4.0
2.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
Input Volume Output Volume
◆
▲ ▲ ▲ ▲
◆
◆
◆
▲ ◆
Bar Vol in Vol outm3/min m3/min
1.38 0.280 4.1912.76 0.476 7.5614.14 0.654 9.2315.52 0.841 11.327
∅95
mm
114m
m
∅ 63.5mm ∅ 50.0mm
15.0mm∅ 40.0mm
∅ 70.0mm
68.5
mm
24.0mm
98.0mm
3⁄8" BSP
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S19
ACETAL ADJUSTABLE AIRMOVER MODEL - AA75A
MOUNTING RINGS FOR ADJUSTABLE AIRMOVERS AND COLD AIR GUNS
Material: Acetal Copolymer
Weight: 0.82Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 81
Shims: Not applicable
Standard Inlet Thread: !/2" BSP
Options: !/2" NPTPlease specify on order !/2" NPTF
Performance at Outlet
Volu
me
(m3 /
min
) 20.0
15.0
10.0
5.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
Input Volume Output Volume
◆ ◆ ◆ ◆
◆
Bar Vol in Vol outm3/min m3/min
1.38 0.425 6.2302.76 0.651 9.2034.14 0.906 12.0355.52 1.133 14.866
∅11
2mm
∅96
mm
∅11
8mm
133m
m
1⁄2" BSP
132mm
53mm
32mm
∅ 135mm
∅ 75mm
PART NUMBER HOLE SIZE (mm) HOLE PCD (mm)
MR 10 SS 6.5 54
MR 20 SS 6.5 65
MR 35 SS 8.5 90
MR 40 SS 8.5 94
MR 60 SS 8.5 135
MR 75 SS 8.5 155
MR 125 SS 10.5 225
MR CG4 SS 6.5 65
Optional Magnetic Base(16Kg Holding Force) add suffix “M’
GRUB SCREWS AT 90˚4 FIXING HOLES ON PCD
∅ 56mm
OPTIONAL MOUNTING RINGS
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S20
The Brauer strip airmover produces a curtain of air along the length of theapplication. The strip airmover uses the same Coanda effect utilised in our other airamplifiers. Again there are no moving parts, with compressed air from a localproduction line source being used to amplify and entrain surrounding air. Outputvolumes almost twenty times higher than those at the input can be achieved.
Many tooling engineers use drilled or slotted lengths of piping in an attemptto flute air over the required area. But these techniques are highly inefficient in theiruse of expensive compressed air. Using the built in effectiveness of the stripairmover, significant compressed air savings can be achieved with short investmentpaybacks. Noise levels will also be reduced.
Our strip airmovers are also offered in stainless steel and can be manufactured inany length from a combination of our standard sizes.
STRIP (AIR CURTAIN) AIRMOVERS
SOME TYPICAL APPLICATIONS – STRIP AIRMOVERS
TEXTILESModel SE600 strip airmovers are ideal for
cleaning and drying large rolls of cloth.
LABEL PRINTINGA model SE150 Strip Airmover
cools the label adhesive and holdsdown the end of the labels until they reach the
rollers, thus improving quality and reducingdamage.
PROTECTION OF ELECTRICSSE300 strip airmover used on shotblast equipment to prevent dust gettingnear electrics
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S21
STRIP AIRMOVER MODEL - SE150
STRIP AIRMOVER MODEL - SE300
Performance at Rear of Strip
Volu
me
(m3 /
min
) 2.0
1.5
1.0
0.5
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
25mm length
Input Volume Output Volume
◆
▲ ▲ ▲ ▲
◆
◆
◆
▲ ◆
1⁄4" BSP
M8 M8 M8 M8
150.0mm
85.0mm85.0mm85.0mm
300.0mm
8mm
22.5mm
1⁄4" BSP
M8 M8
150.0mm
75.0mm
110.0mm
8mm
20.0mm
ALSO AVAILABLE IN STAINLESS STEELTO SPECIAL ORDER
ALSO AVAILABLE IN STAINLESS STEELTO SPECIAL ORDER
Material: Aluminium/Zinc plated steel
Weight: 0.3Kg
Standard Gap: 0.05-0.10mm
DBA at: 5.5 bar is 80
Shims: Not Applicable
Standard Inlet Threads: !/4" BSP
Options: !/4" NPTPlease specify on order !/4" NPTF
Bar Vol in Vol outm3/min m3/min
1.38 0.034 0.6512.76 0.054 0.9634.14 0.074 1.2185.52 0.093 1.642
per 25mm length
per 25mm length
Performance at Rear of Strip
Volu
me
(m3 /
min
) 2.0
1.5
1.0
0.5
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
25mm length
Input Volume Output Volume
◆
▲ ▲ ▲ ▲
◆
◆
◆
▲ ◆
Material: Aluminium/Zinc plated steel
Weight: 0.7Kg
Standard Gap: 0.05-0.10mm
DBA at: 5.5 bar is 80
Shims: Not Applicable
Standard Inlet Threads: !/4" BSP
Options: !/4" NPTPlease specify on order !/4" NPTF
Bar Vol in Vol outm3/min m3/min
1.38 0.034 0.6512.76 0.054 0.9634.14 0.074 1.2185.52 0.093 1.642
5.0mm
30.0mm
25.0mm
30.0mm
5.0mm
25.0mm
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S22
MODEL - SE450 STRIP AIRMOVER
MODEL - SE600 STRIP AIRMOVER
1⁄4" BSP
M8 M8M8M8
150.0mm 150.0mm
185.0mm
600.0mm
185.0mm185.0mm22.5mm
8.0mm
ALSO AVAILABLE IN STAINLESS STEELTO SPECIAL ORDER
!/4" BSP
M8 M8M8M8
135.0mm 135.0mm
125.0mm
450.0mm
125.0mm125.0mm37.5mm
8.0mm30.0mm
5.0mm
25.0mm
Performance at Rear of Strip
Volu
me
(m3 /
min
) 2.0
1.5
1.0
0.5
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
25mm length
Input Volume Output Volume
◆
▲ ▲ ▲ ▲
◆
◆
◆
▲ ◆
Material: Aluminium/Zinc.
Weight: 1.0Kg
Standard Gap: 0.05-0.10mm
DBA at: 5.5 bar is 80
Shims: Not Applicable
Standard Inlet Threads: !/4" BSP
Options: !/4" NPTPlease specify on order !/4" NPTF
Bar Vol in Vol outm3/min m3/min
1.38 0.034 0.6512.76 0.054 0.9634.14 0.074 1.2185.52 0.093 1.642
ALSO AVAILABLE IN STAINLESS STEELTO SPECIAL ORDER
30.0mm
5.0mm
25.0mm
Performance at Rear of Strip
Volu
me
(m3 /
min
) 2.0
1.5
1.0
0.5
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
25mm length
Input Volume Output Volume
◆
▲ ▲ ▲ ▲
◆
◆
◆
▲ ◆
Material: Aluminium/Zinc.
Weight: 1.35Kg
Standard Gap: 0.05-0.10mm
DBA at: 5.5 bar is 80
Shims: Not Applicable
Standard Inlet Threads: !/4" BSP
Options: !/4" NPTPlease specify on order !/4" NPTF
Bar Vol in Vol outm3/min m3/min
1.38 0.034 0.6512.76 0.054 0.9634.14 0.074 1.2185.52 0.093 1.642
per 25mm length
per 25mm length
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S23
STRIP AIRMOVER MODEL - SE750
STRIP AIRMOVER MODEL - SE900
ALSO AVAILABLE IN STAINLESS STEELTO SPECIAL ORDER
!/4" BSP
M8M8 M8M8M8M8
375.0mm
150.0mm 126.0mm
60.0mm
750.0mm
8mm43.0mm
5.0mm
38.0mm
ALSO AVAILABLE IN STAINLESS STEELTO SPECIAL ORDER
!/4" BSP
M8M8 M8M8M8M8
450.0mm
160.0mm
50.0mm
900.0mm
8mm43.0mm
5.0mm
38.0mm
Performance at Rear of Strip
Volu
me
(m3 /
min
) 2.0
1.5
1.0
0.5
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
25mm length
Input Volume Output Volume
◆
▲ ▲ ▲ ▲
◆
◆
◆
▲ ◆
Material: Aluminium/Zinc.
Weight: 1.7Kg
Standard Gap: 0.05-0.10mm
DBA at: 5.5 bar is 80
Shims: Not Applicable
Standard Inlet Threads: !/4" BSP
Options: !/4" NPTPlease specify on order !/4" NPTF
Bar Vol in Vol outm3/min m3/min
1.38 0.034 0.6512.76 0.054 0.9634.14 0.074 1.2185.52 0.093 1.642
Performance at Rear of Strip
Volu
me
(m3 /
min
) 2.0
1.5
1.0
0.5
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
25mm length
Input Volume Output Volume
◆
▲ ▲ ▲ ▲
◆
◆
◆
▲ ◆
Material: Aluminium/Zinc.
Weight: 2.0Kg
Standard Gap: 0.05-0.10mm
DBA at: 5.5 bar is 80
Shims: Not Applicable
Standard Inlet Threads: !/4" BSP
Options: !/4" NPTPlease specify on order !/4" NPTF
Bar Vol in Vol outm3/min m3/min
1.38 0.034 0.6512.76 0.054 0.9634.14 0.074 1.2185.52 0.093 1.642
per 25mm length
per 25mm length
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S24
BRAUER offers two series of blow guns, both hand held and operated by trigger.Our aluminium, trigger action blow guns have found favour with a number of
major industrial companies, and have been particularly successful in difficult dryingoperations. The gun is light in weight and easy to use.
Our light weight reversible blow guns are manufactured from nylon, and are eacha blow gun, vacuum gun and transfer gun in one compact unit. It is ideal for suckingup spills, waste, metal or plastic chips and is chemical and corrosion resistant.A wide range of accessories is available for this gun including dust collection bags,extension tubes, brushes, conveying hose and a crevice tool.
Our lightweight range is further enhanced with a deep hole air gun, ideal forcleaning holes up to 450mm deep.
The deep hole air gun acts both as an air gun and a vacuum gun. A small blacktube running from the main body of the unit blasts air to agitate particles while themain gun nozzle sucks them safely away. The benefit of this exceptional system isthat it keeps swarf from blowing over into other holes and allows all swarf and debristo be cleared completely from deep drilled or tapped holes. A clear plastic tubegives the user visibility to see when the hole is clear of debris and it also providesprotection against any flying particles (see application shot).
TRIGGER ACTION BLOW GUNS
SOME TYPICAL APPLICATIONS - TRIGGER ACTION BLOW GUNS
CAR BODY WORK PAINT REPAIRSAG32 trigger action blow gun is ideal for drying
small areas of paint on car body work.
DRYING PAINTAG32LC trigger action blow gun drying the new
fuel tank on a motorbike.
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S25
PRINTINGThe Reversible Air Gun improves
product quality and workingenvironment in printing by efficient
clean-up of offset powder on a printing press
METAL WORKINGReversible Air Gun with crevice tool
accessory makes easy work ofvacuuming swarf and coolant from
hard to reach areas.
DEEP HOLE CLEANING GUNRemoving chips from deep holes after
drilling is made simple using the speciallydesigned deep hole cleaning gun to purge
holes of debris instantaneously
SOME TYPICAL APPLICATIONS - TRIGGER ACTION BLOW/VACUUM GUNS
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S26
MODEL - AG32 TRIGGER ACTION BLOW GUN
MODEL - AG32LC BLOW GUN
Performance at Outlet
Volu
me
(m3 /
min
) 5
4
3
2
1
01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
Input Volume Output Volume
▲
▲
▲▲
▲
Material: Aluminium Alloy.
Weight: 0.54Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 78
Standard Inlet Thread: !/4" BSP
Options: !/4" NPTPlease specify on order !/4" NPTF
Bar Vol in Vol outm3/min m3/min
1.38 0.122 1.9312.76 0.218 2.9394.14 0.311 3.6955.52 0.405 4.199
∅ 65.0mm
157.0mm
186.
0mm
138.
0mm
∅ 32.0mm
1⁄4" BSP
Performance at Outlet
Volu
me
(m3 /
min
) 5
4
3
2
1
01.38 2.76 4.14 5.52
Supply Pressure (Bar)
0.05mm gap
Input Volume Output Volume
▲
▲
▲▲
▲
Material: Aluminium Alloy.
Weight: 0.54Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 78
Standard Inlet Thread: !/4" BSP
Options: !/4" NPTPlease specify on order !/4" NPTF
Bar Vol in Vol outm3/min m3/min
1.38 0.122 1.9312.76 0.218 2.9394.14 0.311 3.6955.52 0.405 4.199
∅ 65.0mm
157.0mm
186.
0mm
138.
0mm
∅ 32.0mm
1⁄4" BSP
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S27
TRIGGER ACTION REVERSIBLE BLOW GUN MODEL - CG22
Performance at Outlet
Volu
me
(m3 /
min
) 4.03.53.02.52.01.51.00.50.0
1.38 2.76 4.14 5.52
Supply Pressure (Bar)
BLOW
Input Volume Output Volume
▲
▲
▲
▲
▲
Material: Nylon.
Weight: 0.15Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 79
Standard Inlet Thread: !/4" BSP
Option: !/4" NPTPlease specify on order
Bar Vol in Vol outm3/min m3/min
1.38 0.181 1.5122.76 0.295 2.3524.14 0.396 2.8565.52 0.513 3.360
BRAUER
145.
0mm
147.0mm (assembled)
∅ 32.0mm
9.0mm
DEEP HOLE AIR GUN MODEL - CG22DH
Performance at Outlet
Volu
me
(m3 /
min
) 3.53.02.52.01.51.00.50.0
1.38 2.76 4.14 5.52
Supply Pressure (Bar)
VACUUM
Input Volume Output Volume
▲
▲
▲
▲
▲
Material: Nylon.
Weight: 0.20Kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 79
Standard Inlet Thread: !/4" BSP
Option: !/4" NPTPlease specify on order
Bar Vol in Vol outm3/min m3/min
1.38 0.185 1.3442.76 0.304 2.0164.14 0.421 2.5205.52 0.531 2.940
BRAUER
40.0
mm
145.
0mm
125.
0mm
max
.
85.0mm9.0mm
147.0mm (assembled)
31.5
mm
31.5
mm
By reversingthis ejector thegun can eitherblow or suckas a vacuum.
By reversingthis ejector thegun can eitherblow or suckas a vacuum.
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S28
ACCESSORIES FOR REVERSIBLE BLOW GUN (see previous page)
A wide range of accessories is available including Dust Bags, Extension Tubes, Brushes,Crevice Tool and Delivery Hose.
DB22-1
CH22-4
*RB22-6
ET22-3
*CN22-5
*FN22-2
MODEL NO. DESCRIPTION
DB22-1 DUST BAG
RB22-6 ROUND BRUSH*
ET22-3 EXTENSION TUBE
CN22-5 CREVICE TOOL*
FN22-2 FLARED NOZZLE*
CH22-4 EXTENSION HOSE
*can be used with both blow gun anddrum pump
ACCESSORIES FOR DRUM PUMP (see page 32)
A wide range of accessories is available including Extension Tubes, Brushes, and CreviceTool.
DP175-2
DP175-4
DP175-5
MODEL NO. DESCRIPTION
DP175-4 HOSE
DP175-5 EXTENSION TUBE
DP175-2 90° QUICKCONNECTOR
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S29
SOME TYPICAL APPLICATIONS - AIRMISER NOZZLES
Airmiser nozzle cooling a hot spot in aplastic mould.
Brauer Airmisers can be fitted either as part of a system or onto any hand heldblow gun having a !/8” B.S.P. female outlet. The airmiser gives a concentrated highvelocity jet of air, the compressed airflow being magnified some 25 times or more.However this is achieved with minimal consumption.
AIRMISER NOZZLES
STAMPINGCareful placement of this Airmiser Nozzle
ejects parts quickly from this stampingpress whilst conserving compressed air.
MOULDINGThe small size of an Airmiser nozzle with its
instant on/off facility makes it ideal formoulding machines. It is used here forcooling and quick release of small parts.
FOR BRAUER CLAMPING PRODUCTSPLEASE SEE THE BRAUERCLAMPING PRODUCTS CATALOGUE.
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S30
1 ⁄ 8"
BS
P
17.0mm38.0mm
∅ 18.0mm
MODEL - AIRMISER NOZZLES
Performance at Outlet
Volu
me
(m3 /
min
) 5.0
4.0
3.0
2.0
1.0
0.01.38 2.76 4.14 5.52
Supply Pressure (Bar)
Input Volume Output Volume
▲
▲
▲
▲
▲
Material: Aluminium Alloy.
Weight: 0.025Kg
Standard Gap: 0.15mm
DBA at: 5.5 bar is 83
Inlet Thread: !/8” BSP only
Bar Vol in Vol outm3/min m3/min
1.38 0.125 2.2652.76 0.212 3.2564.14 0.300 4.1065.52 0.391 4.672
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S31
BRAUER has developed a range of tooling aids to assist the workshop engineer –whether he is working with metals, plastics or chemicals.
The Brauer Drum Pump is designed to pick up liquid spills in the workshop. Thesystem utilises the standard 205 litre drum including the two holes which arestandard in the drum lid. Tests have shown that the Brauer Drum Pump can transfer125 litres of machine tool coolant in 65 seconds. The Brauer Drum Pump comes witha number of useful tools which allow the transfer of liquids and solids with ease fromdifficult areas.
The Brauer air pump system CGP22 is designed to convey a wide range ofmaterials both horizontally and vertically over long distances in a ducted system.
When placed in series the air pump will provide enhanced performance by givingimproved conveying power over a much greater distance.
INDUSTRIAL CLEANING AIR PUMP SYSTEMS
SOME TYPICAL APPLICATIONS - DRUM PUMP
METALWORKINGThe Drum Pump kit handles sludge, oil
coolant or wet swarf pulling it intodrums for clean and easy disposal.
PLASTICSAir Pump system used for maintenance free
conveying of plastic granules.
REMOVING SWARFDrum pump cleaning up swarf into metal drumfor easy disposal.
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S32
MODEL - DP175 LIQUID DRUM PUMP
Material: Pump: Stainless SteelConnector: Nylon
Weight: 1.6Kg
DBA at: 5.5 bar is 92
Standard Inlet Threads: !/4" BSP
Options: !/4" NPTPlease specify on order
MODEL - CGP22 AIR PUMP SYSTEM
BRAUER
190.
0mm
50.0mm
Air Consumption & Generated Vacuum
Volu
me
(m3 /
min
)
1.0
0.8
0.6
0.4
0.2
0.03.93 4.90 5.86 6.90 7.86
Supply Pressure (Bar)
Volume (m^3/min) Vacuum (Bar)
■
◆◆
◆
◆◆
■■
■
◆ ■
■
Bar Vol in Vol outm3/min m3/min
3.93 0.170 0.4764.90 0.212 0.5595.86 0.255 0.6416.90 0.297 0.7247.86 0.340 0.807
∅ 45.0mm
145.
0mm
147.0mm (assembled)
∅ 32.0mm
9.0mm
Performance at Outlet
Volu
me
(m3 /
min
) 4.03.53.02.52.01.51.00.50.0
1.38 2.76 4.14 5.52
Supply Pressure (Bar)
BLOW
Input Volume Output Volume
▲
▲
▲
▲
▲
Bar Vol in Vol outm3/min m3/min
1.38 0.181 1.5122.76 0.295 2.3524.14 0.396 2.8565.52 0.513 3.360
Performance at Outlet
Volu
me
(m3 /
min
) 3.53.02.52.01.51.00.50.0
1.38 2.76 4.14 5.52
Supply Pressure (Bar)
VACUUM
Input Volume Output Volume
▲
▲
▲
▲
▲
Material: Nylon.
Weight: 0.12kg
Standard Gap: Adjustable
DBA at: 5.5 bar is 79
Standard Inlet Threads: !/4" BSP
Options: !/4" NPTPlease specify on order
Bar Vol in Vol outm3/min m3/min
1.38 0.185 1.3442.76 0.304 2.0164.14 0.421 2.5205.52 0.531 2.940
∅ 40mmHOSE CONNECTION
HOSECONNECTION
COMPRESSIONCOLLAR
CONNECTIONSLEEVE
1.5” BSPT TO2.0”BSPTADAPTOR
DRUMCONNECTION
61 A/F
140
#/4" BSPT
By reversingthis ejector thegun can eitherblow or suckas a vacuum.
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S33
STAINLESS STEEL VORTEX TUBES
VORTEX TUBES AND HOW THEY WORK
A Vortex Tube turns ordinary compressed air into two streams of air, one is verycold and one hot.
The Brauer Vortex Tube is manufactured from stainless steel giving excellentresistance to oxidation and corrosion and particularly high wear resistance. No toolsare needed to adjust the temperature; this is achieved by use of a control knob atthe end of the unit.
Brauer Vortex Tubes can produce:– temperatures from 38°C below input temperature to 39°C above input
temperature– airflow rates up to 30 CFM (860 LPM)– refrigeration up to 1430 Btu/H (360 Kcal/H)Applications include the cooling of electronic enclosures.
A compressed air supply at up to 6.9 bar is used to create 2 low pressure airflows when passed through the vortex generator. The generator spins the air andseparates it into cold air and hot air. The cold air exits at typically 38˚C below the airsupply temperature, whilst hot air at 39˚C above the air supply temperature exits atthe rear of the vortex chamber.
CompressedAir In
Cold AirOut
VortexGenerationChamber
ControlValve
Hot AirOut
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S34
VORTEX TUBES PERFORMANCE
The Vortex Tube Performance Charts below give approximate temperature drops(and rises) from inlet air temperature produced by a vortex tube set at each coldfraction. Assuming no fluctuation of inlet temperature or pressure, a vortex tube willreliably maintain temperature within ±1°C.
M14 x 1.5
49mm
!/4"BSP
213mm
MODEL - CG4AX VORTEX TUBES
Material: Stainless Steel.
Weight: 1.5Kg
DBA at: 5.5 bar is 80
Standard Inlet Threads: !/4" BSP
Options: !/4" NPTPlease specify on order !/4" NPTF
PERFORMANCE (METRIC)400
300
200
100
0
200 400 600 800 1000
KC
AL
/H
LPMPIN = 6.9 BAR PIN = 5.5 BAR
Unit / Supply Pressure Air Consumption Thermal Capacity Temp Red’sGenerator BAR LPM KCAL/H °C
#2 6.9 439 255 38#4 6.9 499 283 34#6 6.9 678 360 25#8 6.9 857 318 16.4#2 5.5 336 180 36#4 5.5 392 217 33#6 5.5 555 298 25#8 5.5 698 285 16
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S35
COLD AIR GUNS – FIXED AND ADJUSTABLE
SOME TYPICAL APPLICATIONS - COLD AIR GUN
PLASTICS AND MACHININGA Cold Air Gun improves the finish on this
plastic by cooling the cutting tool thusincreasing the life of the cutting tool and
therefore speeding up cycle times.
FOOD PROCESSING -PRODUCT COOLING
Two Cold Air Guns provide clean,cold dry airto cool bakery items eliminating expensive
and long cooling conveyors, and thusimproving productivity.
It seems amazing that your workshop compressed air can be used to provide twovery different air streams when passed through the Brauer Cold Air Gun orVortex Tube
– one air stream at 38˚C below the workshop supply temperature– the other at 39˚C above the workshop supply temperatureall by using a Brauer Cold Air GunThe uses for such a phenomenon are widespread:– cool machining operations, removing the need for wet coolant– cool electronic control cabinets– setting hot formed plastics, sealants or soldersAll are achieved with no electric power requirement and using a virtually
maintenance free, stainless steel constructed Vortex Tube.The Brauer adjustable cold air gun has incorporated a temperature control knob
allowing you to set the optimum efficiency required for your application.
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S36
146mm
Supplied with magnetic base
257mm
46m
m
≥9.5mm
!/4"BSP
330mm
≥9.5mm
330mm
GUARD
275mm
!/4"BSP
111mm140mm
MODEL - CG4 COLD AIR GUN
Material: Stainless Steel
Weight: 1.7Kg
DBA at: 5.5 bar is 80
Standard Inlet Threads: !/4" BSP
Options: !/4" NPTPlease specify on order !/4" NPTF
MODEL - CG4A ADJUSTABLE COLD AIR GUN
Material: Stainless Steel.
Weight: 1.7Kg
DBA at: 5.5 bar is 80
Standard Inlet Threads: !/4" BSP
Options: !/4" NPTPlease specify on order !/4" NPTF
Optional mounting rings and magnetic base are available(see page 19).
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S37
In some applications it is important to vent large volumes of air or fumes asquickly as possible – for example in venting the cargo holds of ships. Brauer offers arange of lightweight, GRP construction ventilators which remove dust and fumesquickly and safely, and are resistant to chemicals, salt water and general corrosion.A range of anti-static extractor/ventilators is also available
EXTRACTOR VENTILATORS
SOME TYPICAL APPLICATIONS - EXTRACTOR VENTILATORS
FUME EXTRACTIONAn EV4 extractor ventilator removing fumes
directly from the face of the welder. Thefumes can be led away by a flexible pipe
to the outside or to a ventilation system
FUME EXTRACTIONAn EV6 extractor removing hot gassesfrom chemical storage tank prior to tank
venting, inspection and cleaning.
An EV8 extractor ventilator used tovent the cargo hold of a ship prior tocleaning.
MODEL - EV2 EXTRACTOR VENTILATOR
MODEL - EV3 EXTRACTOR VENTILATOR
66.6
7mm
50.8
mm
73mm
177.8mm
AIR CONNECTION
!/2” BSP
101.
6mm
76.2
mm
101.6mm
228.6mm
AIR CONNECTION
!/2” BSP
Output Volume vs Supply Pressure
Vo
lum
e(m
3/m
in) 30
25
20
15
10
5
01.38 2.76 4.14 5.52 6.90
Supply Pressure (Bar)
Bar Vol outm3/min
1.38 2.8322.76 6.7964.14 11.8935.52 18.4066.90 26.051
Output Volume vs Supply Pressure
Vo
lum
e(m
3/m
in) 40
30
20
10
01.38 2.76 4.14 5.52 6.90
Supply Pressure (Bar)
Bar Vol outm3/min
1.38 3.6812.76 8.4954.14 16.7075.52 25.4856.90 33.980
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S38
Material: GRP
Weight: 0.43Kg
DBA at: 5.5 bar is 90
Takes 2!/2” bore ducting
Standard Inlet Threads: !/2" BSP
Option: !/2" NPTPlease specify on order
Material: GRP.
Weight: 0.71Kg
DBA at: 5.5 bar is 88
Takes 4” bore ducting
Standard Inlet Threads: !/2" BSP
Option: !/2" NPTPlease specify on order
50 mmBORE
75 mmBORE
A
I
R
M
O
V
E
R
STelephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628 39
EXTRACTOR VENTILATOR MODEL - EV4
EXTRACTOR VENTILATOR MODEL - EV6
Output Volume vs Supply Pressure
Vo
lum
e(m
3/m
in) 50
40
30
20
10
02.76 4.14 5.52 6.90
Supply Pressure (Bar)
Material: GRP.
Weight: 1.5Kg
DBA at: 5.5 bar is 85
Takes 6” bore ducting
Standard Inlet Threads: !/2" BSP
Option: !/2" NPTPlease specify on order
Bar Vol outm3/min
2.76 10.1944.14 20.3885.52 35.3966.90 45.307
Output Volume vs Supply Pressure
Vo
lum
e(m
3/m
in) 80.000
60.000
40.000
20.000
0.0004.14 5.52 6.90
Supply Pressure (Bar)
Material: GRP.
Weight: 4.5Kg
DBA at: 5.5 bar is 78
Takes 10” ducting
Standard Inlet Threads: !/2" BSP
Option: !/2" NPTPlease specify on order
Bar Vol outm3/min
4.14 27.7515.52 50.9706.90 65.129
152.
4mm
101.
6mm
152.4mm
342.9mm
AIR CONNECTION
!/2” BSP
247.
65m
m
152.
4mm
247.65mm
635mm
AIR CONNECTION
!/2” BSP
100 mmBORE
150 mmBORE
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S40
MODEL - EV8 EXTRACTOR VENTILATOR
279.
4mm
203.
2mm
304.8mm
863.6mm
AIR CONNECTION
!/2” BSP
Output Volume vs Supply Pressure
Vo
lum
e(m
3/m
in) 120.00
100.00
80.000
60.000
40.000
20.000
0.0004.14 5.52 6.90
Supply Pressure (Bar)
Material: GRP.
Weight: 7Kg
DBA at: 5.5 bar is 75
Takes 12” ducting
Standard Inlet Threads: !/2" BSP
Option: !/2" NPTPlease specify on order
Bar Vol outm3/min
4.14 56.6345.52 76.4556.90 96.277
MODEL - AEV4 ANTI-STATIC EXTRACTOR VENTILATOR
Output Volume vs Supply Pressure
Vo
lum
e(m
3/m
in) 50
40
30
20
10
02.76 4.14 5.52 6.90
Supply Pressure (Bar)
Material: GRP.
Weight: 1.75Kg
DBA at: 5.5 bar is 85
Takes 6” ducting
Standard Inlet Threads: !/2" BSP
Option: !/2" NPTPlease specify on order
Bar Vol outm3/min
2.76 10.1944.14 20.3885.52 35.3966.90 45.307
152.
4mm
101.
6mm
152.4mm
342.9mm
AIR CONNECTION
!/2” BSP
200 mmBORE
100 mmBORE
Telephone: +44 (0)1908 374022 Facsimile: +44 (0)1908 641628
A
I
R
M
O
V
E
R
S41
ANTI-STATIC EXTRACTOR VENTILATOR MODEL - AEV6
Output Volume vs Supply Pressure
Vo
lum
e(m
3/m
in) 80.000
60.000
40.000
20.000
0.0004.14 5.52 6.90
Supply Pressure (Bar)
Material: GRP.
Weight: 5Kg
DBA at: 5.5 bar is 78
Takes 10” ducting
Standard Inlet Threads: !/2" BSP
Option: !/2" NPTPlease specify on order
Bar Vol outm3/min
4.14 27.7515.52 50.9706.90 65.129
247.
65m
m
152.
4mm
247.65mm
635mm
AIR CONNECTION
!/2” BSP
ANT-STATIC EXTRACTOR VENTILATOR MODEL - AEV8
Output Volume vs Supply Pressure
Vo
lum
e(m
3/m
in) 120.00
100.00
80.000
60.000
40.000
20.000
0.0004.14 5.52 6.90
Supply Pressure (Bar)
Material: GRP.
Weight: 7.5Kg
DBA at: 5.5 bar is 75
Takes 12” ducting
Standard Inlet Threads: !/2" BSP
Option: !/2" NPTPlease specify on order
Bar Vol outm3/min
4.14 56.6345.52 76.4556.90 96.277
279.
4mm
203.
2mm
304.8mm
863.6mm
AIR CONNECTION
!/2” BSP
150 mmBORE
200 mmBORE
OTHER PRODUCTS
CLAMPING PRODUCTS PNEUMATIC WORKHOLDING POWER CLAMPING
INDUSTRIAL PRESSESHMC
WHEELS & CASTORS LINEAR/ROTARY BEARINGS
R O T O L I N
DOWEL PINS DIE SETS & PRESS TOOL ACCESSORIES
04/0
0
Authorised Dealer stamp
For further details contact
DAWSON ROAD, MOUNT FARM,MILTON KEYNES, ENGLAND MK1 1JP
TEL: 00 44(0)1908-374022 FAX: 00 44(0)1908 641628email: [email protected] web: www.brauer.co.uk