Airedale School System ProductsHEATING | VENTILATING | COOLING | DEHUMIDIFY

2 AIR75-120.8

THE DIFFERENCE IS IN THE AIRThe latest classroom heating and ventilation technology makes the grade in clean air quality, delivering improvements to air exhaust, fresh air supply, and overall circulation.

Serviceability – Save significant time and money with easy access to critical components and controls. Even annual filter replacement and general cleaning are a snap.

Efficiency – For maximum efficiency and operation, our units utilize the latest technology, including a microchannel evaporator coil. All Airedale SPVU equipment meets or exceeds the Department of Energy requirements for efficiency.

Noise Reduction – Less background noise and fewer distractions lead to more successful classrooms. Additional sound attenuating options are available for all of our packaged units.

Size Options – Multiple configurations, capacity options and product footprints can handle a wide variety of specifications and CFM demands.

Environmentally Conscious – With the R-410A refrigerant and our expanded line of water/ ground source heat pump units, our systems help schools stay in front of the environmental curve.

3AIR75-120.8

Table of Contents

Steam/Hot Water Unit Heaters

14

18

Steam/Hot Water Fin Tube Heaters

Vertical Unit Ventilators

4 6

Under the Window Unit Ventilators

8 10

16

DX/Chilled Water Ceiling Cassettes

Steam/Hot Water Cabinet Unit Heaters

Steam/Hot Water Convectors

4 AIR75-120.8

NOISE REDUCTION • ULTRA-ENERGY EFFICIENCY • SERVICEABILITY

With convenient modular designs, Airedale Vertical Unit Ventilators are the quietest single-packaged product of its type

on the market today. They are engineered for efficiency, noise reduction, and a small footprint to make installations

easy in LEED-designed facilities. Available in a variety of classroom solutions and supply air options for assured air

circulation throughout the classroom.

Vertical Unit Ventilators

• The highest standard in classroom noise reduction

• Lined with 2" acoustic insulation to minimize noise levels

• Reduces noise by up to 7 dB(A)

• Can be used to meet LEED prerequisites

CLASSMATE® AND SCHOOLMATE® AVAILABLE WITH STUDY PACKAGE

STANDARD FEATURES ClassMate® SchoolMate® Sentinel®

Featuring the patented CF coil for greater cooling and heating efficiency X XHermetic two-speed scroll compressor enables part load efficiencies to be increased X XECM fan technology balances performance and noise X XDesigned and optimized for R-410A refrigerant X XModulating economizer damper providing 100% free-cooling and minimum fresh air requirements X X XAluminized steel casing with a durable polyester powder coat paint finish X X X2" radial pleated disposable cotton and synthetic blend filters. Up to MERV 16 filtration X X XModine Controls System X X X

OPTIONS

Sound-reducing compressor acoustic wrap (STUDY Package) X XFactory supplied BACnet or LonWorks compatible controls X X XEnergy recovery wheel with up to 100% economizer capability X XElectric heating X XPowered exhaust X X XHot water or steam heating coil X XHot gas reheat for dehumidification control X XHot water valve and piping packages X XBaseboard heat control with Modine Controls (2 - lO Vdc Modulating, Single-Stage, and Two-Stage) X XEnergy recovery wheel XFace and bypass XThree-speed switch XHot water and chilled water valve and piping packages X

ACCESSORIES

Wall sleeve and rear extension for customized solutions X X XDischarge plenums* X X XHumidity sensor X X XDuct shrouds X X XOutdoor louvers X X XSide trims X X XVibration mat X X

*Acoustic option available for ClassMate® and SchoolMate®

5AIR75-120.8

ClassMate® Air Conditioning & Heat Pump Unit

• Model sizes 24, 36, 48 and 60 Nominal MBH

• Easy service and installation

• Front access to components

• No plenum required for additional hot gas reheat, hot water, or electric coils

• All models meet or exceed the DOE minimum requirement of 11.0 EER

MODEL CMD/CMP/CMS

Sentinel® Unit Ventilator

• Model sizes 30, 40, 50, 60 and 80 Nominal MBH

• Five models: Chilled water, hot water, steam, and a combination of chilled and hot water (two-pipe or four-pipe configuration)

• Components are accessible through the lockable, hinged front door

• Engineered to provide the proper amount of fresh air to the classroom while minimizing energy consumption

• Complies with ASHRAE standard 62-89

MODEL UVV/UVD

SchoolMate® Ground Source and Water Source Heat Pump Unit

• Model sizes 24, 30, 36, 42, 48 and 60 Nominal MBH

• Easy service and installation

• Front access to all components

• No plenum required for additional hot gas reheat, hot water or electric coils

• Rated in accordance with AHRI ISO 13256-1

MODEL SMG/SMW

For complete technical information and specifications reference ClassMate® AIR 2-104, SchoolMate® AIR 2-126, and Sentinel® AIR 3-101.

6 AIR75-120.8

IDEAL FOR SCHOOLS • IMPROVE INDOOR AIR QUALITY • FLEXIBLE, MODULAR DESIGNKEEPS EXISTING PRODUCTS UP TO DATE

The Varsity® is the perfect solution for both new construction and replacement of existing units in schools

that want to improve the indoor air quality of their classrooms. Designed to be tough, dependable,

aesthetically pleasing, quiet and easy to install, the Varsity® keeps an established product up-to-date with

an impressive list of features and options.

A variety of ventilation configurations are available that utilize fully modulating outside air and return air

dampers allow for any mixture of outside air and return air to be drawn through the unit.

Discharge air temperature is controlled using either a face-and-bypass damper or a modulating control

valve. The units may be configured as DDC ready set-up for field installed controls, factory installed field

issues or an optional Modine Controls System with Carel® Programmable Microprocessor controller with

optional BACnet or LonWorks compatibility. Piping components can be ordered individually or configured

as a pre-installed piping package.

Under the Window Unit Ventilators

VARSITY® - CHILLED WATER COOLING CAPACITY (Btu/hr)

Coil Rows750 CFM 1,000 CFM 1,250 CFM 1,500 CFM

Total Sensible Total Sensible Total Sensible Total Sensible

2 12,770 11,926 26,570 22,239 34,943 28,620 43,437 35,037

3 24,248 17,914 34,532 24,829 45,124 31,894 55,621 38,942

4 26,267 18,603 37,404 25,651 48,576 32,845 59,662 40,230

Rated in accordance with ARI Standard 840. Water temperature rise is 10°F, with entering water temperature of 45°F. Entering air temperature is 80°F dry bulb, 67°F wet bulb.

VARSITY® - HOT WATER HEATING CAPACITY (Btu/hr)

Coil Rows 750 CFM 1,000 CFM 1,250 CFM 1,500 CFM

1 28,792 46,690 60,158 74,326

2 50,121 66,799 87,070 107,922

3 61,369 81,238 102,356 124,104

4 67,050 93,125 117,537 132,160

Entering water temperature is 180°F and leaving water temperature is 140°F. Entering air temperature is 60°F.

7AIR75-120.8

STANDARD FEATURES AND OPTIONS• Offering a full range of sizes - 750, 1,000, 1,250 and 1,500 CFM

• Available with chilled water or DX cooling and hot water or steam heating

• More efficient coil design for optimal temperature and pressure drops

• Full economizer mode allows you to enjoy free outside air cooling during favorable seasons

• Modine Controls System designed for the Varsity® to maximize efficiency and operation

• Motor is mounted outside the airstream, isolating and reducing drive shaft and bearing vibration noise

• Heavy-duty cabinet design acts as an extra noise damper

• 14-16 gauge cabinet panels make the Varsity® one of the most damage-resistant unit ventilators

• Modular design allows easy access and removal of all critical components

• Cabinet end pockets centralize the location of components

• Chilled water cooling (2-4 rows) available with changeover

OPTIONS

• Wide selection of outdoor louvers designed to blend into façade

• Valve and control utility compartments are available to match unit color and finish

• Hot water heating coils available

• Multiple inlet air arrangements to accommodate various sill and louver heights

• Optional slope top design prevents books and other objects from being set on top of the unit

• Optional piping package available on floor mounted units. All piping components - control valve,

strainer, circuit setter, shut-off valves, PT ports and balancing valve - will be factory assembled

and ship installed in the unit

• Available in a variety of one- or two-tone colors, textures and fingerprint-free hammer tone

MODEL ZFF/ZSF/ZFV/ZSV MODEL ZCV/ZCF

For complete technical information and specifications reference catalog AIR14-100

8 AIR75-120.8

DX/Chilled Water Ceiling Cassettes

Designed to effectively create independently-controlled temperature zones, cassettes are ideal for classrooms,

offices, laboratories, conference rooms or any environment where space is at a premium and low noise is essential. This versatility eliminates compromising architecture or design, and cost savings are often realized during building updates, as existing piping and/or wiring can frequently be reused.

INDEPENDENTLY CONTROL ZONES • REDUCE NOISE LEVELS • MAXIMIZE EFFICIENCY

• Thermostatic control operations to vary conditions for diverse requirements or activities

• Low blower speeds, rigid panel and cabinet construction, and sound-absorbent insulation reduces noise to a minimum

• Electric heat or water modules that provide heating

• Fresh air intakes that ventilate and recirculate room air

• Electro-mechanical or microprocessor based controls

• Microprocessor controller includes an infrared transmitter that enables room conditions to be maintained at a user-defined set point

• Modine Controls System with Carel® Programmable controller

with optional BACnet or LonWorks compatibility

MODEL CCW/CSD/CSH

AVAILABLE IN THREE MODELS – DX COOLING, HEAT PUMP AND CHILLED WATER COOLING:

OPTIONAL FACTORY-INSTALLED FEATURES:

9AIR75-120.8

DIRECT EXPANSION (DX) AIR CONDITIONING AND HEAT PUMP MODELS

Model No.Total Cooling (Btu/hr)

Heat Pump (Btu/hr)

SEER HSPFHot Water Heat

(Btu/hr)

Electric Heat (kW)

Dimensions - H x W x D (inches) Weight (lbs)Chassis Fascia

CSD/CSH 18 19,200 16,400 14 8.2 38,746 3.0 11 5/8 x 32 5/16 x 32 3/8 2 5/8 x 37 x 37 84CSD/CSH 24 23,000 21,400 14 8.2 41,993 3.0 11 5/8 x 32 5/16 x 32 3/8 2 5/8 x 37 x 37 84CSD/CSH 30 31,400 27,400 14 8.2 56,603 5.0 11 1/2 x 44 7/16 x 32 3/8 2 5/8 x 49 3/16 x 37 118CSD/CSH 36 38,200 32,400 14 8.2 59,600 5.0 11 1/2 x 44 7/16 x 32 3/8 2 5/8 x 49 3/16 x 37 118CSD/CSH 42 42,500 37,200 14 8.2 64,268 5.0 11 1/2 x 44 7/16 x 32 3/8 2 5/8 x 49 3/16 x 37 118

Cooling capacities based on 80/67°F DB/WB indoor, 95/75°F DB/WB outdoor ambient, high fan speed. Heating capacities based on 70/60°F DB/WB indoor, 47/43°F DB/WB outdoor ambient, high fan speed. Nominal hot water heating capacity based on air 70°F, 180°F inlet / 160°F outlet water temperatures, high fan speed.

CHILLED WATER COOLING MODELS

Model No. FilterTotal

Cooling (Btu/hr)

Hot Water Heat (Btu/hr)

Electric Heat (kW)

Dimensions - H x W x D (inches) Weight (lbs)Chassis Fascia

CCW 08STD. 7,800 17,100

1.5 10 11/16 x 22 1/2 x 22 1/2 2 5/8 x 25 3/16 x 25 3/16 45MERV 10 5,400 13,400

CCW 12STD. 11,200 N/A

1.5 10 11/16 x 22 1/2 x 22 1/2 2 5/8 x 25 3/16 x 25 3/16 45MERV 10 6,800 N/A

CCW 18STD. 18,200 27,300

3.0 9 1/2 x 32 5/16 x 32 3/8 2 5/8 x 37 x 37 82MERV 10 16,500 24,800

CCW 20STD. 18,600 27,900

3.0 9 1/2 x 32 5/16 x 32 3/8 2 5/8 x 37 x 37 82MERV 10 16,500 24,800

CCW 33STD. 31,100 41,200

5.0 11 1/2 x 44 7/16 x 32 3/8 2 5/8 x 49 3/16 x 37 118MERV 10 29,700 42,300

CCW 36STD. 34,300 45,200

5.0 11 1/2 x 44 7/16 x 32 3/8 2 5/8 x 49 3/16 x 37 118MERV 10 29,700 42,300

Nominal chilled water cooling capacity based on air 80/67°F DB/WB, 45°F inlet / 55°F outlet water temperatures, high fan speed. Nominal hot water heating capacity based on air 70°F, 180°F inlet / 160°F outlet water temperatures, high fan speed.

For complete technical information and specifications reference document AIR 8.105

10 AIR75-120.8

WIDE PRODUCT SELECTION • APPLICATION FLEXIBILITY • EASE OF INSTALLATION AND MAINTENANCE

Airedale Horizontal Unit Heaters are ideal for heating buildings with large open areas and low ceilings.

Unit heaters are used to counter heat loss along outside building walls, especially where windows are present.

Steam/Hot Water Unit Heaters

WIDE PRODUCT SELECTION

• Ratings as low as 11,300 Btu/hr for hot water to as high as 952,000 Btu/hr for steam,

based on standard conditions

• Horizontal, Vertical and Power-Throw™ (high-velocity horizontal air delivery) models offer

maximum application flexibility

APPLICATION FLEXIBILITY

• Horizontal and Power-Throw™ units are furnished with louvers for directional control

of heated air where as vertical units are available with various louver, truncone and

cone-jet deflector options

• Power-Throw™ units are available with 90/10 copper-nickel for high pressure/

temperature applications up to 250 PSI or 400°F

• Design assures the correct relationship between air temperature, velocity and air

volume for greater heat throw; air is delivered to the floor at maximum mounting height,

increasing comfort and reducing fuel costs

11AIR75-120.8

EASE OF INSTALLATION/MAINTENANCE = RELIABILITY

• Units are compact and lightweight

• All units include an electrical junction box, either integral to the motor or mounted on the unit casing

• All units are component tested for proper motor function and the coils are leak tested under pressure

to ensure proper function when the unit arrives at the job site

• Fins on all units are vertical to the limit build-up of foreign particles, prolonging periods between

cleanings; fins on Vertical and Power-Throw™ units are exposed for easy cleaning

BLENDS WITH THE ENVIRONMENT

• Quiet operation is assured through the use of carefully selected motors, fans and scientifically designed

venturi fan shrouds

• Casings are treated for corrosion resistance and finished with a neutral gray-green baked-on,

electrostatically applied polyester powder coat paint finish

12 AIR75-120.8

Steam/Hot Water Unit Heaters

• 13 model sizes from 18,000 to 340,000 Btu/hr

• Recommended for use in buildings where ceilings are low with few obstructions

• Copper tubes with mechanically bonded aluminum fins for maximum heat transfer performance

• Motors are totally enclosed with thermal overload protection

MODEL WTC/WSC Horizontal Unit Heater

• 6 model sizes from 22,000 to 195,000 Btu/hr

• Specifically recommended for use with high-efficiency boilers

• Copper tubes with mechanically bonded aluminum fins for maximum heat transfer performance

• Motors completely enclosed with thermal overload protection

• UL1995 certified

MODEL WSH/LODRONIC™ Horizontal Unit Heater

WIDE PRODUCT SELECTION • APPLICATION FLEXIBILITY • EASE OF INSTALLATION AND MAINTENANCE

Airedale Power-Throw™ Horizontal Unit Heaters are ideal for heating large buildings where a number of

smaller units can be replaced by a few larger Power-Throw™ units. Their high-velocity air delivery results

in the greatest heat throw available with a more economical installation. Vertical Unit Heaters are ideal

for heating buildings with high ceilings or areas that require the heater to be mounted above obstructions

such as crane ways.

13AIR75-120.8

• 6 model sizes from 279,000 to 952,000 Btu/hr

• Recommended where there is a requirement for greater heat throw and hard to heat areas such as docks and large warehouses

• Powerful, high-velocity air delivery distributes heat over a wide area

• WPC models have copper tubes while VPN models have copper/nickel tubes for high temperature and/or pressure

• Low outlet temperature models for higher steam pressures or dirty atmospheres

• 15 model sizes from 42,000 to 952,000 Btu/hr

• Recommended for areas where ceilings are high or where obstructions do not permit good horizontal movement of air

• WVC models have copper tubes while WVN models have copper/nickel tubes for higher temperature and/or pressure

• Low outlet temperature models for higher steam pressures or dirty atmospheres

• Optional cone-jet, truncone, or louver air deflectors for a variety of heat patterns

MODEL WPC/WPN Power-Throw™ High-Velocity Horizontal Unit Heater

MODEL WVC/WVN Vertical Unit Heater

14 AIR75-120.8

INDEPENDENT HEATING ZONES • REDUCE NOISE LEVELS TO A MINIMUM • REUSE EXISTING PIPING AND/OR WIRING

Airedale cabinet unit heaters effectively make each area served an independent heating zone.

Cabinet unit heaters are ideal for offices, classrooms, retail stores, laboratories or any place where

space is at a premium and low noise is essential. Important cost savings are often realized during

building modernizations, as existing piping and/or wiring can frequently be reused.

Noise levels are reduced to an absolute minimum in every cabinet using techniques such as:

low blower speeds, rigid panel and cabinet construction, and sound-absorbent cabinet insulation.

Steam/Hot Water Cabinet Unit Heaters

STANDARD FEATURES• Attractive one-piece cabinet top and sides

for rigorous conditions

• All welded construction

• Cabinet pretreated for prevention of corrosion and painted with a baked-on enamel finish

• Quick change permanent filters

• Sound dampening insulation

• Copper tube, aluminum fin coils

• Removable blower and motor

• Solid state speed control with off position ACCESSORIES

• Room thermostats

• Aquastats

• 2 or 3 position electric valves

• Modulating non-electric valves

• Perma-Lap® frames and wall gasketing

OPTIONS

• 2, 3, & 4 row, high-capacity hot water coil

• Right hand piping, left hand electrical

• Energy efficient permanent split capacitor motors or high static motors

• Disconnect switch

• Tamper proof hardware with key locks

• Motorized outside/return air dampers

• Leveling legs

15AIR75-120.8

MODEL WCC

Exposed Wall or Ceiling Mounted Unit

MODEL WCC

Recessed (Full or Partial) Wall or Ceiling Mounted Unit

Shown with Optional Perma-Lap® Frame

MODEL FC

Exposed Floor Mounted Unit

For complete technical information and specifications reference catalog AIR11-160

16 AIR75-120.8

EASY INSTALLATION • MAXIMUM HEAT TRANSFER • MEETS MOST APPLICATIONS

• Supplied in 2- to 8-foot lengths• Enclosures fasten together with a slip joint • Knob or tamper proof dampers available • Available in a variety of colors to match most decors• Accessories to match enclosure styles provide flexibility in design and installation

Airedale Fin Tube Heaters are designed with a variety of enclosure styles to meet most applications or

architectural styles. Heating elements are copper tubes with aluminum fins that are mechanically bonded

to the copper tube to provide maximum heat transfer. A choice of fin spacings permits the selection of

elements to meet your design requirements.

Steam/Hot Water Fin Tube Heaters

MODEL PS

Slope Top Security

MODEL P

Pedestal Mounted

MODEL PA

Pedestal Mounted Aluminum Grille

MODEL FT

Flat Top Protective Metal Cover

MODEL EM

Expanded Metal

Copper Tube with Aluminum Fin Heating Element

17AIR75-120.8

MODEL F

Front Outlet

MODEL S

Slope Top

MODEL T

Top Outlet

MODEL SF

Slope Top Floor Mounted

MODEL R

Front and Top Outlet

MODEL RF

Front and Top Outlet Floor Mounted

MODEL SP

Trimfin®

MODEL TA

Top Outlet with Aluminum Grille

18 AIR75-120.8

MAXIMUM INSTALLATION FLEXIBILITY • EASY INSTALLATION • USE FOR HOT WATER OR STEAM

Airedale convectors provide maximum installation flexibility for a variety of heating applications.

Tubes are mechanically expanded into aluminum fins to form a durable bond for maximum heat transfer.

Airedale offers convectors in 24-64 inch lengths and four different heights, ranging from 18-32 inches

depending on model. A complete line of options and accessories provides flexibility in design and installation.

Steam/Hot Water Convectors

STANDARD FEATURES• Ratings from 1,000 to 27,000 Btu/hr

• 20 gauge liner, 18 gauge front

• Heating elements available in three nominal

depths: 4" (2-tube), 6" (3-tube), or 8" (4-tube)

• Pretreated for corrosion and finished with a

polyester-epoxy powder coating

• Mechanically bonded aluminum fins with

integral collars for uniform spacing and

maximum heat transfer

OPTIONS/ACCESSORIES• Louvered, security perforated or aluminum

bar grille inlet/outlet front covers

• 18, 16, and 14 gauge liner and/or

cover options

• Access door

• Tamperproof hardware

• 1/2" thick fiberglass insulation

• Right- and/or left-hand end pockets

• Outlet dampers assembly, knob or

tamperproof operator

• Wall gas jet seal

19AIR75-120.8

MODEL FL

Flat Top Floor Mounted

MODEL SF

Slope Top Floor Mounted

MODEL PL

Fully-Recessed Wall Mounted

MODEL SL

Slope Top Wall Mounted

Modine Manufacturing Company

1500 DeKoven Avenue

Racine, Wisconsin 53403-2552

Phone: 1.800.828.4328 (HEAT)

www.modinehvac.com

©2021 Modine Manufacturing Co.

Follow us @ModineHVAC

See us at YouTube.com/ModineHVAC

www.facebook.com/ModineHVAC/

www.linkedin.com/company/modinehvac/AIR75-120.8