Aircraft Warning Lights - Gunneman Group · Aircraft Warning Lights ICARO INTRODUCTION S irena...
Transcript of Aircraft Warning Lights - Gunneman Group · Aircraft Warning Lights ICARO INTRODUCTION S irena...
MADE IN ITALYEngineered,
Developed andAssembled in
Rosta, Italy
C.so Moncenisio 5-10-12-14-16 10090 ROSTA (TO) | Italia
Tel +39.011.95.68.555 (25 linee ISDN) | Fax +39.011.95.67.928
www.sirena.it | [email protected]
R.E.A. 487901 | Mecc. TO 027549Registro Imprese TO - C.F.01047730013
Partita IVA IT 01047730013Capitale sociale € 5.000.000 di cui versato € 5.000.000
ICAROAircraft Warning Lights
GENERAL CATALOGUEICARO is Sirena’s range of high-end Aircraft Warning Lights engineered
to last and perform
www.icaroawl.com
ICARO_ENG_V1.1.0
8 010152 010453
Aircraft Warning LightsICARO
CONFIGURATORAPPLICATIONWILL GUIDE YOU TO SELECT
THE BEST AWL SOLUTIONFOR YOUR OBSTACLE
MARKING NEEDS
OUR
iOS VersionWEB Versionwww.icaroawl.com/webconfigurator
INTRODUCTION................................................... 2
LOW INTENSITY WARNING LIGHTSAWL 810/AB ..................................................... 4
AWL 810/AB TWIN ............................................. 5
MEDIUM INTENSITY WARNING LIGHTSAWL 864/BC ..................................................... 6
AWL 864/BC TWIN ............................................. 7
AWL 865.866/A ................................................ 8
AWL 864+865.6/BC+A ....................................... 9
HIGH INTENSITY WARNING LIGHTSAWL 856.857/AB ............................................ 10
AWL 856.7+864/AB+BC ................................... 11
CONTROL BOX ................................................ 12
ACCESSORIES ................................................. 13
SUGGESTED CONFIGURATIONS .................. 14
VEHICLE WARNING LIGHTSAWL 810/C ..................................................... 18
FOLLOW-ME BAR ........................................... 19
HELIPAD PERIMETER LIGHTSAWL HELIX ...................................................... 20
Aircraft Warning Lights
INDEX
ICARO
Index
Aircraft Warning LightsICARO
INTRODUCTION
Sirena designs, engineers and manufactures signaling devices since 1974. From Industrial Signaling Devices to Evacuation Systems, through Aircraft
Warning Lights and Automation Devices, our expertise allows to deliver Customers with the highest quality signaling devices available on today’s market.
With 40 years of intense know-how and a presence in over 60 countries worldwide, Sirena is the best choice when it comes to satisfying your signaling needs.
ICARO is Sirena’s Aircraft Warning Lights range. Engineered entirely on LED base, ICARO’s Low, Medium and High intensity devices are one of the best products available today. High performance, easy installation and virtually zero maintenance, allow Customers and Installers to add considerable value to their projects. All devices are ICAO and FAA certified as well as CE marked.
Our expert Team will guide you to the right choice and will help you to determine the best and most cost efficient solutions for your projects.
With a complete range of devices (Low Intensity Type A and B, Medium Intensity Type A, B and C and High Intensity Type A and B), ICARO is the complete solution you are looking for.
Sirena is ISO 9001, 14001 and 18001 certified. www.icaroawl.com
2
33
HIGH INTENSITY High Intensity Aircraft
Warning Lights compliant to ICAO Type A, B and FAA L-856, L-857 regulations.
100% LED based, these devices offer a white light with a maximum intensity of 200.000 Cd satisfying the most demanding applications.
Typically installed on structures over 150 meters, high intensity devices are used for day and twilight marking.
MEDIUM INTENSITY Medium Intensity Aircraft
Warning Lights compliant to ICAO Type A, B, C and FAA L-864, L-865, L-866 regulations.
100% LED based, these devices offer a white/red light with a maximum intensity of 20.000 Cd satisfying the most demanding applications.
Typically installed on structures over 45 meters, medium intensity devices are used for day, twilight and night marking.
LOW INTENSITY Low Intensity Aircraft Warning
Lights compliant to ICAO Type A, B and FAA L-810 regulations.
100% LED based, these devices offer a red light with a minimum intensity of 32 Cd satisfying the most common applications.
Typically installed on structures below 45 meters and as intermediate devices on taller structures, low intensity devices are used for night marking only.
4
AW
L 8
10/A
BLOW INTENSITYAIRCRAFT WARNING LIGHT
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
Crepuscular sensor for automatic activation (part no 51045)
Beacon-fault report (clean electrical contact) (part no 51045/51046)
INSTALLATION
Pole mounting | Direct (3/4” NPT-F)
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
Low intensity aircraft warning light engineered according to ICAO Low Intensity Type A/B and FAA L-810 regulations.
With a lightweight heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a red steady light, its optical reflector guarantees a 360° horizontal beam radiation and a vertical beam between +6° and +10°.
Also available with a 70 Cd light intensity output, on-board crepuscular sensor and flashing light option.
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to incandescent bulbs).
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
DRAWINGS, DIMENSIONS AND WEIGHTS
0,60
13
1,5
D 120
ICA
RO
AWL 810/AB | PART NO
AWL 810/AB 12/30V DC 51010
AWL 810/AB 70CD 12/30V DC 51045
AWL 810/AB 70CD 12/30V DC 51046
PSU 110/240V ACDC 51011
SIDE BRACKET 51013
crepuscular sensor activated
crepuscular sensor not activated
-25+55
C°PCALBASE DOME
ON SELFextinguishingIP65
SMD
TYPE B
>32CD
4W70 CD
70CD
10W
5
Low intensity aircraft warning light engineered according to ICAO Low Intensity Type A/B and FAA L-810 regulations.With a lightweight heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a red steady light, its optical reflector guarantees a 360° horizontal beam radiation and a vertical beam between +6° and +10°.
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to incandescent bulbs).
The device is equipped with two separate LED circuits and, thanks to the current sensor installed on board, it automatically switches to the secondary circuit when main fails, with the possibility of sending an alarm signal.
INSTALLATION
Pole mounting | Direct (3/4” NPT-F)
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
-25+55
C°PCBASE DOME
ON SELFextinguishingIP65AL
SMD
TYPE B
>32CD
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
5W
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
TWINFUNCTION
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
Twin operations with the same device(back-up circuit included)
Crepuscular sensor for automatic activation (part no 51014)
Beacon-fault report (clean electrical contact)
AW
L 8
10/A
B T
WIN
TWINBACK-UPCIRCUIT
INCLUDED
TWIN LOW INTENSITYAIRCRAFT WARNING LIGHT
0,60
DRAWINGS, DIMENSIONS AND WEIGHTS
13
1,5
D 120
ICA
RO
AWL 810/AB TWIN | PART NO
AWL 810/AB TWIN 12/30V DC 51014
AWL 810/AB TWIN 12/30V DC 51047
PSU 110/240V ACDC 51011
SIDE BRACKET 51013
crepuscular sensor activated
crepuscular sensor not activated
AW
L 8
10/A
B
LOW INTENSITYAIRCRAFT WARNING LIGHT
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
Crepuscular sensor for automatic activation (part no 51045)
Beacon-fault report (clean electrical contact) (part no 51045/51046)
INSTALLATION
Pole mounting | Direct (3/4” NPT-F)
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
Low intensity aircraft warning light engineered according to ICAO Low Intensity Type A/B and FAA L-810 regulations.
With a lightweight heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a red steady light, its optical reflector guarantees a 360° horizontal beam radiation and a vertical beam between +6° and +10°.
Also available with a 70 Cd light intensity output, on-board crepuscular sensor and flashing light option.
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to incandescent bulbs).
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
DRAWINGS, DIMENSIONS AND WEIGHTS
0,60
13
1,5
D 120
ICA
RO
AWL 810/AB | PART NO
AWL 810/AB 12/30V DC 51010
AWL 810/AB 70CD 12/30V DC 51045
AWL 810/AB 70CD 12/30V DC 51046
PSU 110/240V ACDC 51011
SIDE BRACKET 51013
crepuscular sensor activated
crepuscular sensor not activated
-25+55
C°PCALBASE DOME
ON SELFextinguishingIP65
SMD
TYPE B
>32CD
4W70 CD
70CD
10W
6
AW
L 8
64/B
CMEDIUM INTENSITYAIRCRAFT WARNING LIGHT
Medium intensity aircraft warning light engineered according to ICAO Medium Intensity Type B/C and FAA L-864 regulations.With an induced air heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a steady/flashing red light, its optical lenses guarantee a 360° horizontal beam radiation and a vertical beam of +3°. Can be configured to Type B (flashing) or Type C (steady).
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to xenon discharge bulbs).
The device is equipped with three spirit balls for perfect installation and can send an alarm signal in case of malfunction.
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
Beacon-fault report (clean electrical contact)
INSTALLATION
Flat mounting | To flat surfaces using the accessory “Flat mounter”
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
-45+55
C° ON SELFEXTINGUISHINGIP66
BASE
AL
SMD
TYPE B/C
2000CD
TYPE B
9WTYPE C
54W
PYREXDOME
TYPE B
1F 20+/-5
FPM
CONDENSEFREE
ENVIRONMENT
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
3,7
225
117
DRAWINGS, DIMENSIONS AND WEIGHTSICA
RO
AWL 864/BC | PART NO
AWL 864/B 20/55V DC 51016
AWL 864/C 20/55V DC 51048
AWL 864/B 240V AC 51017
AWL 864/C 240V AC 51049
FLAT MOUNTER 51031
SIDE BRACKET 51030
110V AC version available on request
110V AC version available on request
7
AW
L 8
64/B
C
MEDIUM INTENSITYAIRCRAFT WARNING LIGHT
Medium intensity aircraft warning light engineered according to ICAO Medium Intensity Type B/C and FAA L-864 regulations.With an induced air heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a steady/flashing red light, its optical lenses guarantee a 360° horizontal beam radiation and a vertical beam of +3°. Can be configured to Type B (flashing) or Type C (steady).
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to xenon discharge bulbs).
The device is equipped with three spirit balls for perfect installation and can send an alarm signal in case of malfunction.
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
Beacon-fault report (clean electrical contact)
INSTALLATION
Flat mounting | To flat surfaces using the accessory “Flat mounter”
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
-45+55
C° ON SELFEXTINGUISHINGIP66
BASE
AL
SMD
TYPE B/C
2000CD
TYPE B
9WTYPE C
54W
PYREXDOME
TYPE B
1F 20+/-5
FPM
CONDENSEFREE
ENVIRONMENT
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
3,7
225
117
DRAWINGS, DIMENSIONS AND WEIGHTSICA
RO
AWL 864/BC | PART NO
AWL 864/B 20/55V DC 51016
AWL 864/C 20/55V DC 51048
AWL 864/B 240V AC 51017
AWL 864/C 240V AC 51049
FLAT MOUNTER 51031
SIDE BRACKET 51030
110V AC version available on request
110V AC version available on request
AW
L 8
64/B
C T
WIN
TWIN MEDIUM INTENSITYAIRCRAFT WARNING LIGHT
Medium intensity aircraft warning light engineered according to ICAO Medium Intensity Type B/C and FAA L-864 regulations.With an induced air heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a steady/flashing red light, its optical lenses guarantee a 360° horizontal beam radiation and a vertical beam of +3°. Can be configured to Type B (flashing) or Type C (steady).
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to xenon discharge bulbs).
The device is equipped with two separate LED circuits and, thanks to the current sensor installed on board, it automatically switches to the secondary circuit when main fails, with the possibility of sending an alarm signal.
The device is equipped with three spirit balls for perfect installation and can send an alarm signal in case of malfunction.
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
Twin operations with the same device(back-up circuit included)
Beacon-fault report (clean electrical contact)
INSTALLATION
Flat mounting | To flat surfaces using the accessory “Flat mounter”
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
-45+55
C° ON SELFEXTINGUISHINGIP66
BASE
AL
SMD
TYPE B/C
2000CD
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
TYPE B
9WTYPE C
54W
PYREXDOME
TYPE B
1F 20
FPM
CONDENSEFREE
ENVIRONMENT
TWINFUNCTION
TWINBACK-UPCIRCUIT
INCLUDED
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
4,0
DRAWINGS, DIMENSIONS AND WEIGHTS
225
117
AWL 864/BC TWIN | PART NO
AWL 864/B TWIN 20/55V DC 51018
AWL 864/C TWIN 20/55V DC 51057
AWL 864/B TWIN 240V AC 51019
AWL 864/C TWIN 240V AC 51058
FLAT MOUNTER 51031
SIDE BRACKET 51030
110V AC version available on request
110V AC version available on request
ICA
RO
8
AW
L 8
65.8
66/A
MEDIUM INTENSITYAIRCRAFT WARNING LIGHT
Medium intensity aircraft warning light engineered according to ICAO Medium Intensity Type A and FAA L-865/L-866 regulations.With an induced air heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a flashing white light, its optical lenses guarantee a 360° horizontal beam radiation and a vertical beam of +3°.
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to xenon discharge bulbs).
The device is equipped with three spirit balls for perfect installation and can send an alarm signal in case of malfunction.
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
Beacon-fault report (clean electrical contact)
INSTALLATION
Flat mounting | To flat surfaces using the accessory “Flat mounter”
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
-45+55
C° ON SELFEXTINGUISHINGIP66
BASE
AL
SMD 20000CD
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
DAY
51W
PYREXDOME
1F 20
FPM
2000CD
NIGHT
13W
CONDENSEFREE
ENVIRONMENT
1F 20
FPM
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
4,0
DRAWINGS, DIMENSIONS AND WEIGHTS
225
117
ICA
RO
AWL 865.866/A | PART NO
AWL 865.866/A 20/55V DC 51020
AWL 865.866/A 240V AC 51021
FLAT MOUNTER 51031
SIDE BRACKET 51030
110V AC version available on request
9
AW
L 8
65.8
66/A
MEDIUM INTENSITYAIRCRAFT WARNING LIGHT
Medium intensity aircraft warning light engineered according to ICAO Medium Intensity Type A and FAA L-865/L-866 regulations.With an induced air heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a flashing white light, its optical lenses guarantee a 360° horizontal beam radiation and a vertical beam of +3°.
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to xenon discharge bulbs).
The device is equipped with three spirit balls for perfect installation and can send an alarm signal in case of malfunction.
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
Beacon-fault report (clean electrical contact)
INSTALLATION
Flat mounting | To flat surfaces using the accessory “Flat mounter”
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
-45+55
C° ON SELFEXTINGUISHINGIP66
BASE
AL
SMD 20000CD
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
DAY
51W
PYREXDOME
1F 20
FPM
2000CD
NIGHT
13W
CONDENSEFREE
ENVIRONMENT
1F 20
FPM
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
4,0
DRAWINGS, DIMENSIONS AND WEIGHTS
225
117
ICA
RO
AWL 865.866/A | PART NO
AWL 865.866/A 20/55V DC 51020
AWL 865.866/A 240V AC 51021
FLAT MOUNTER 51031
SIDE BRACKET 51030
110V AC version available on request
AW
L 8
64+8
65.6
/BC
+ADUAL MEDIUM INTENSITYAIRCRAFT WARNING LIGHT
Medium intensity aircraft warning light engineered according to ICAO Medium Intensity Type A + Type B/C and FAA L-865/L-866 + L-864 regulations.With an induced air heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with both a steady/flashing red light (Type BC) and a flashing white light (Type A), its optical lenses guarantee a 360° horizontal beam radiation and a vertical beam of +3°.
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to xenon discharge bulbs).
The device is equipped with three spirit balls for perfect installation and can send an alarm signal in case of malfunction.
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
Dual functionality (Type A + Type B/C)
Beacon-fault report (clean electrical contact)
INSTALLATION
Flat mounting | To flat surfaces using the accessory “Flat mounter”
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
-45+55
C° ON SELFEXTINGUISHINGIP66
BASE
AL
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
PYREXDOME
CONDENSEFREE
ENVIRONMENT
DUALTYPE A +TYPE BC
TYPE B/C
2000CD
TYPE B
9WTYPE C
54WTYPE B
1F 20
FPM
TYPE BC
TYPE A
SMD 20000CD
DAY
51W 1F 20
FPM
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
6,0
DRAWINGS, DIMENSIONS AND WEIGHTS
225
180
ICA
RO
AWL 864+865.866/BC+A | PART NO
AWL 864+5.6/B+A 20/55V DC 51022
AWL 864+5.6/C+A 20/55V DC 51052
AWL 864+5.6/B+A 240V AC 51023
AWL 864+5.6/C+A 240V AC 51054
FLAT MOUNTER 51031
SIDE BRACKET 51030
110V AC version available on request
110V AC version available on request
10
AW
L 8
56.8
57/A
BHIGH INTENSITYAIRCRAFT WARNING LIGHT
High intensity aircraft warning light engineered according to ICAO High Intensity Type A/B and FAA L-856/L-857 regulations.With an induced air heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a flashing white light, its optical lenses guarantee a 120°/360° horizontal beam radiation and a vertical beam of +3°/7°. Can be configured to Type A (100.000 Cd twilight use) or Type B (200.000 Cd day use).
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to xenon discharge bulbs).
The device is equipped with three spirit balls for perfect installation and can send an alarm signal in case of malfunction.
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
120° or 360° versions available
Beacon-fault report (clean electrical contact)
INSTALLATION
Flat mounting | To flat surfaces using the accessory “Flat mounter”
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
-45+55
C° ON SELFEXTINGUISHINGIP66
BASE
AL
SMD 200000CD
DAY
226W
PYREXDOME
1F 20
FPM
100000CD
TWILIGHT
110W 1F 20
FPM
CONDENSEFREE
ENVIRONMENT
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
ICA
RO
DRAWINGS, DIMENSIONS AND WEIGHTS
566
225
12,0AWL 856.857/AB | PART NO
AWL 856.857/AB 240V AC (120°) 51024
AWL 856.857/AB 240V AC (360°) 51025
FLAT MOUNTER 51031
SIDE BRACKET 51030
110V AC version available on request
110V AC version available on request
11
AW
L 8
56.7
+864/A
B+B
CDUAL HIGH+MID INTENSITYAIRCRAFT WARNING LIGHT
DUAL high + medium intensity aircraft warning light engineered according to ICAO High Intensity Type A/B and FAA L-856/L-857 regulations (high) and ICAO Medium Intensity Type B/C and FAA L-864 regulations (medium).With an induced air heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
HIGH | Provided with a flashing white light, its optical lenses guarantee a 120°/360° horizontal beam radiation and a vertical beam of +3°/7°. Can be configured to Type A (100.000 Cd twilight use) or Type B (200.000 Cd day use).
MEDIUM | Provided with a steady/flashing red light, its optical lenses guarantee a 120°/360° horizontal beam radiation and a vertical beam of +3°. Can be configured to Type B (flashing) or Type C (steady).
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to xenon discharge bulbs).
The device is equipped with three spirit balls for perfect installation and can send an alarm signal in case of malfunction.
INSTALLATION
Flat mounting | To flat surfaces using the accessory “Flat mounter”
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
DRAWINGS, DIMENSIONS AND WEIGHTS
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
566
225
12,0
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
120° or 360° versions available
Dual functionality (High Intensity Type A/B + Mid Intensity Type B/C)
Beacon-fault report (clean electrical contact)
-45+55
C° ON SELFEXTINGUISHINGIP66
BASE
AL
SMD 200000CD
DAY
226W
PYREXDOME
1F 20
FPM
100000CD
TWILIGHT
110W 1F 20
FPM
CONDENSEFREE
ENVIRONMENT
NIGHT
TYPE B/C
2000CD
TYPE B
9WTYPE C
54WTYPE B
1F 20+/-5
FPM
DUALHIGH + MIDINTENSITY
ICA
RO
DHI
AWL 856.7+864/AB+BC | PART NO
AWL 856.7+864/AB+B 240V AC (120°) 51034
AWL 856.7+864/AB+C 240V AC (120°) 51059
AWL 856.7+864/AB+B 240V AC (360°) 51035
AWL 856.7+864/AB+C 240V AC (360°) 51060
FLAT MOUNTER 51031
SIDE BRACKET 51030
110V AC version available on request
110V AC version available on request
110V AC version available on request
110V AC version available on request
AW
L 8
56.8
57/A
B
HIGH INTENSITYAIRCRAFT WARNING LIGHT
High intensity aircraft warning light engineered according to ICAO High Intensity Type A/B and FAA L-856/L-857 regulations.With an induced air heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a flashing white light, its optical lenses guarantee a 120°/360° horizontal beam radiation and a vertical beam of +3°/7°. Can be configured to Type A (100.000 Cd twilight use) or Type B (200.000 Cd day use).
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to xenon discharge bulbs).
The device is equipped with three spirit balls for perfect installation and can send an alarm signal in case of malfunction.
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
120° or 360° versions available
Beacon-fault report (clean electrical contact)
INSTALLATION
Flat mounting | To flat surfaces using the accessory “Flat mounter”
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
-45+55
C° ON SELFEXTINGUISHINGIP66
BASE
AL
SMD 200000CD
DAY
226W
PYREXDOME
1F 20
FPM
100000CD
TWILIGHT
110W 1F 20
FPM
CONDENSEFREE
ENVIRONMENT
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
ICA
RO
DRAWINGS, DIMENSIONS AND WEIGHTS
566
225
12,0AWL 856.857/AB | PART NO
AWL 856.857/AB 240V AC (120°) 51024
AWL 856.857/AB 240V AC (360°) 51025
FLAT MOUNTER 51031
SIDE BRACKET 51030
110V AC version available on request
110V AC version available on request
12
CO
NTR
OL U
NIT
SIC
AR
OCONTROL UNITS
Installing multiple signaling devices on the same obstruction structure (pylon, antenna, building, etc.) is defined as System.
A central control unit must be used to control all MEDIUM and HIGH INTENSITY systems. A dedicated control unit can be used for multiple installation of LOW INTENSITY devices.
The control unit simplifies main operation activities (activation, control of potential anomalies, etc.), as well as possible maintenance procedures.
LOW INTENSITY devices can be controlled with a single control unit.
MEDIUM INTENSITY devices may require one single unit to control the whole system, according to installation scenarios.
HIGH INTENSITY devices require a dedicated control unit in any installation scenarios. Each control unit controls one device only: a system with multiple HIGH INTENSITY devices on the same obstruction structure requires more control units (1:1 ratio), connected in a MASTER/SLAVE network.
CONTROL UNITS | PART NO
AWL CU LOW INT 12/30V DC 51070
AWL CU LOW INT 110/240V ACDC 51071
AWL CU MID INT 20/55V DC (max 4) 51063
AWL CU MID INT 20/55V DC (max 8) 51064
AWL CU MID INT 240V AC (max 4) 51061
AWL CU MID INT 240V AC (max 8) 51062
AWL CU HIGH INT 240V AC (120°) 51026
AWL CU HIGH INT 240V AC (360°) 51027
AWL CU H+M INT DUAL 240V AC (120°) 51068
AWL CU H+M INT DUAL 240V AC (360°) 51069
AWL CREPUSCULAR SENSOR 51065
AWL GPS SYNC MODULE 51032
AWL TEMPERATURE CONTROL UNIT 51066
AWL FRONT-PANEL FAULT REPORT 51067
GPS synchronization module (simultaneosly flashing)
Beacons-fault report available on front panel
Crepuscular sensor
Temperature control unit
OPTIONAL FEATURES
Isolation switch for power supply 230V 50/60 Hz
Automatic switch (one for each device)
Auto/Man operation switch selector
Beacons-fault report available on terminals (clean electrical contacts)
Power-on LED indicator
Electronic alarms (current relays)
Power electronics for beacons feeding
Lightning protection
KEY CHARACTERISTICS
ICARO Control Units for AWL Low Intensity devices can control up to 8 devices
LOW INTENSITY
ICARO Control Units for AWL High Intensity devices are available in four versions:
- Control Unit for 1 AWL High Intensity device 120°
- Control Unit for 1 AWL High Intensity device 360°
- Control Unit for 1 AWL High Intensity device DUAL 120°
- Control Unit for 1 AWL High Intensity device DUAL 360°
HIGH INTENSITY
Image used for illustrative purposes only. Dimensions and content according to selected system
SYSTEMDESIGN SUPPORT
Our Team of experts can assist designers and installers with professional support in terms of norms and system configuration.
ICARO Control Units for AWL Medium Intensity devices are available in two versions:
- Control Unit for max. 4 AWL Medium Intensity devices
- Control Unit for max. 8 AWL Medium Intensity devices
MEDIUM INTENSITY
13
AC
CES
SO
RIE
S
AWL 86X/85X(medium + high intensity)
AWL 810/HELIX(low intensity)
2 MOUNTERSINCLUDED
AWL 810/HELIX
Ø7
2"
Ø9
1"
1 2"
112
"
34
"
47
90 0,2
AWL 86X/85X
Ø7
2"
Ø9
1"
1 2"
112"
34
"88
162 0,7
61
102
120
6
115
136
0,7
1,4
ICA
RO
PSU can control up to two AWL 810/AB devices.For AWL 810/AB TWIN and AWL HELIX we recommend using one power supply unit for each device
AWL 810/HELIX PSU
ACCESSORIES | PART NO
AWL 86X/85X FLAT MOUNTER 51031
AWL 810/HELIX SIDE BRACKET 51013
AWL 86X/85X SIDE BRACKET 51030
AWL 810/HELIX PSU 110/240V ACDC 51011
(2 mounters included)
SIDE BRACKETSStainless steel side mounter, allows lateral mounting to walls, side poles or side structures. Available for AWL 810/HELIX (Low Intensity AWL) and for AWL 86X/85X (Medium and High Intensity AWL)
FLAT MOUNTERStainless steel flat mounter, can be used to mount Medium Intensity and High Intensity AWL to flat surfaces
AWL 810/HELIX PSU110/240V ACDC Power Supply Unit for AWL 810 and HELIX devices
3
114,3
66
21,2
43
43
10
250152
130
102
130
3
74
120
34
11
49
72
107
41,5
Ø6,5
CO
NTR
OL U
NIT
SIC
AR
O
CONTROL UNITS
Installing multiple signaling devices on the same obstruction structure (pylon, antenna, building, etc.) is defined as System.
A central control unit must be used to control all MEDIUM and HIGH INTENSITY systems. A dedicated control unit can be used for multiple installation of LOW INTENSITY devices.
The control unit simplifies main operation activities (activation, control of potential anomalies, etc.), as well as possible maintenance procedures.
LOW INTENSITY devices can be controlled with a single control unit.
MEDIUM INTENSITY devices may require one single unit to control the whole system, according to installation scenarios.
HIGH INTENSITY devices require a dedicated control unit in any installation scenarios. Each control unit controls one device only: a system with multiple HIGH INTENSITY devices on the same obstruction structure requires more control units (1:1 ratio), connected in a MASTER/SLAVE network.
CONTROL UNITS | PART NO
AWL CU LOW INT 12/30V DC 51070
AWL CU LOW INT 110/240V ACDC 51071
AWL CU MID INT 20/55V DC (max 4) 51063
AWL CU MID INT 20/55V DC (max 8) 51064
AWL CU MID INT 240V AC (max 4) 51061
AWL CU MID INT 240V AC (max 8) 51062
AWL CU HIGH INT 240V AC (120°) 51026
AWL CU HIGH INT 240V AC (360°) 51027
AWL CU H+M INT DUAL 240V AC (120°) 51068
AWL CU H+M INT DUAL 240V AC (360°) 51069
AWL CREPUSCULAR SENSOR 51065
AWL GPS SYNC MODULE 51032
AWL TEMPERATURE CONTROL UNIT 51066
AWL FRONT-PANEL FAULT REPORT 51067
GPS synchronization module (simultaneosly flashing)
Beacons-fault report available on front panel
Crepuscular sensor
Temperature control unit
OPTIONAL FEATURES
Isolation switch for power supply 230V 50/60 Hz
Automatic switch (one for each device)
Auto/Man operation switch selector
Beacons-fault report available on terminals (clean electrical contacts)
Power-on LED indicator
Electronic alarms (current relays)
Power electronics for beacons feeding
Lightning protection
KEY CHARACTERISTICS
ICARO Control Units for AWL Low Intensity devices can control up to 8 devices
LOW INTENSITY
ICARO Control Units for AWL High Intensity devices are available in four versions:
- Control Unit for 1 AWL High Intensity device 120°
- Control Unit for 1 AWL High Intensity device 360°
- Control Unit for 1 AWL High Intensity device DUAL 120°
- Control Unit for 1 AWL High Intensity device DUAL 360°
HIGH INTENSITY
Image used for illustrative purposes only. Dimensions and content according to selected system
SYSTEMDESIGN SUPPORT
Our Team of experts can assist designers and installers with professional support in terms of norms and system configuration.
ICARO Control Units for AWL Medium Intensity devices are available in two versions:
- Control Unit for max. 4 AWL Medium Intensity devices
- Control Unit for max. 8 AWL Medium Intensity devices
MEDIUM INTENSITY
LOW INTENSITYsteady red
Part: AWL 810/AB
DAY: OFFNIGHT: STEADY RED
LOW INTENSITYLOW INTENSITYLOW INTENSITY
LOW INTENSITY14
Aircraft Warning LightsICARO
SUGGESTEDCONFIGURATIONS
ELEVATED STRUCTURES <45 m
ELEVATED STRUCTURES <105 m
DAY: FLASHING WHITENIGHT: FLASHING WHITE
MEDIUM INTENSITY
MEDIUM INTENSITYflashing white
Part: AWL 865.866/A
MEDIUM INTENSITYMEDIUM INTENSITYMEDIUM INTENSITY
DAY: FLASHING WHITENIGHT: FLASHING RED
DUALMEDIUM INTENSITY
flashing white + flashing redPart: AWL 864+865.6/B+A
LOW INTENSITYsteady red
Part: AWL 810/AB
H/2
MA
X 5
2m
H/2
MA
X 5
2m
DAY: FLASHING WHITENIGHT: STEADY RED
MEDIUM INTENSITY
DUALMEDIUM INTENSITY
flashing white + steady redPart: AWL 864+865.6/C+A
MEDIUM INTENSITYsteady red
Part: AWL 864/C
MEDIUM INTENSITYflashing red
Part: AWL 864/B
DAY: OFF NIGHT: FLASHING RED
LOW INTENSITYsteady red
Part: AWL 810/AB
MEDIUM INTENSITYsteady red
Part: AWL 864/C
MEDIUM INTENSITYsteady red
Part: AWL 864/C
DAY: OFF NIGHT: STEADY RED
MEDIUM INTENSITY
MA
RK
ED
NO
T M
AR
KED
H/2
MA
X 5
2m
H/2
MA
X 5
2m
15
MEDIUM AND LOW INTENSITY
MEDIUM AND LOW INTENSITY
ELEVATED STRUCTURES <15O m
DAY: FLASHING WHITENIGHT: FLASHING WHITE
MEDIUM INTENSITY
MEDIUM INTENSITYflashing white
Part: AWL 865.866/A
MEDIUM INTENSITYflashing white
Part: AWL 865.866/A
DAY: FLASHING WHITENIGHT: FLASHING RED
MEDIUM AND LOW INTENSITY
DUALMEDIUM INTENSITY
flashing white + flashing redPart: AWL 864+865.6/B+A
LOW INTENSITYsteady red
Part: AWL 810/AB
DUALMEDIUM INTENSITY
flashing white + flashing redPart: AWL 864+865.6/B+A
LOW INTENSITYsteady red
Part: AWL 810/AB
DAY: FLASHING WHITENIGHT: STEADY RED
DUALMEDIUM INTENSITY
flashing white + steady redPart: AWL 864+865.6/C+A
DUALMEDIUM INTENSITY
flashing white + steady redPart: AWL 864+865.6/C+A
DAY: OFFNIGHT: FLASHING RED
MEDIUM INTENSITYflashing red
Part: AWL 864/B
LOW INTENSITYsteady red
Part: AWL 810/AB
MEDIUM INTENSITYflashing red
Part: AWL 864/B
LOW INTENSITYsteady red
Part: AWL 810/AB
DAY: OFFNIGHT: STEADY RED
MEDIUM AND LOW INTENSITY
MEDIUM INTENSITYsteady red
Part: AWL 864/C
MEDIUM INTENSITYsteady red
Part: AWL 864/C
MEDIUM INTENSITYsteady red
Part: AWL 864/C
MEDIUM INTENSITYsteady red
Part: AWL 864/C
NO
T M
AR
KED
MA
RK
ED
MEDIUM INTENSITYsteady red
Part: AWL 864/C
MEDIUM INTENSITY
MEDIUM INTENSITYsteady red
Part: AWL 864/C
MEDIUM INTENSITY
MEDIUM INTENSITY
MA
X 1
04
mM
AX
10
4m
MA
X 1
04
mM
AX
10
4m
H/2
H/2
MA
X 1
04
H/2H/2
MA
X 1
04
H/2H/2
MA
X 1
04
mM
AX
10
4m
H/2
H/2
MA
X 1
04
H/2H/2
MA
X 1
04
H/2H/2
16 MEDIUM INTENSITY
ELEVATED STRUCTURES >150 mM
AX
10
5m
M
AX
10
5m
M
AX
10
5m
HIGH INTENSITYflashing white
Part: AWL 856.857/AB
HIGH INTENSITYflashing white
Part: AWL 856.857/AB
HIGH INTENSITYflashing white
Part: AWL 856.857/AB
DAY: FLASHING WHITENIGHT: FLASHING RED
DUAL HIGH + MID INTENSITY
flashing white + flashing redPart: AWL 856.7+864/AB+B
LOW INTENSITYsteady red
Part: AWL 810/AB
DUAL HIGH + MID INTENSITY
flashing white + flashing redPart: AWL 856.7+864/AB+B
LOW INTENSITYsteady red
Part: AWL 810/AB
DUAL HIGH + MID INTENSITY
flashing white + flashing redPart: AWL 856.7+864/AB+B
LOW INTENSITYsteady red
Part: AWL 810/AB
HIGH AND LOW INTENSITY
MEDIUM INTENSITYflashing white
Part: AWL 865.866/A
MEDIUM INTENSITYflashing white
Part: AWL 865.866/A
MEDIUM INTENSITYflashing white
Part: AWL 865.866/A
DAY: FLASHING WHITENIGHT: FLASHING RED
MEDIUM AND LOW INTENSITY
LOW INTENSITYsteady red
Part: AWL 810/AB
DUAL MEDIUM INTENSITY
flashing white + flashing redPart: AWL 864+865.6/B+A
LOW INTENSITYsteady red
Part: AWL 810/AB
DUAL MEDIUM INTENSITY
flashing white + flashing redPart: AWL 864+865.6/B+A
LOW INTENSITYsteady red
Part: AWL 810/AB
DUAL MEDIUM INTENSITY
flashing white + flashing redPart: AWL 864+865.6/B+A
DUAL DUAL DUAL
NO
T M
AR
KED
NO
T M
AR
KED
MA
RK
ED
DAY: FLASHING WHITENIGHT: FLASHING WHITE
HIGH INTENSITY
DAY: FLASHING WHITENIGHT: FLASHING WHITE
DAY: FLASHING WHITENIGHT: STEADY RED
DUAL HIGH + MID INTENSITY
flashing white + steady redPart: AWL 856.7+864/AB+C
MEDIUM INTENSITYsteady red
Part: AWL 864/C
MEDIUM INTENSITYsteady red
Part: AWL 864/C
MEDIUM INTENSITYsteady red
Part: AWL 864/C
HIGH AND MEDIUM INTENSITY
DUAL HIGH + MID INTENSITY
flashing white + steady edPart: AWL 856.7+864/AB+C
DUAL HIGH + MID INTENSITY
flashing white + steady redPart: AWL 856.7+864/AB+C
DAY: FLASHING WHITENIGHT: STEADY RED
DUAL MEDIUM INTENSITY
flashing white + steady redPart: AWL 864+865.6/C+A
MEDIUM INTENSITYsteady red
Part: AWL 864/C
DUAL MEDIUM INTENSITY
flashing white + steady redPart: AWL 864+865.6/C+A
MEDIUM INTENSITYsteady red
Part: AWL 864/C
DUAL MEDIUM INTENSITY
flashing white + steady redPart: AWL 864+865.6/C+A
MEDIUM INTENSITYsteady red
Part: AWL 864/C
MEDIUM INTENSITY
MA
X 1
05
m
MA
X 1
05
m
MA
X 1
05
m
H/2
H/2
H/2
MA
X 1
05
m
MA
X 1
05
m
MA
X 1
05
m
H/2
H/2
H/2
MA
X 1
05
m
MA
X 1
05
m
MA
X 1
05
m
MEDIUM INTENSITY
18
AW
L 8
10/C
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
INSTALLATION
Flat mounting | Mounting on flat surfaces (DIN B configuration, 3 holes at 120° intervals)
Plug mounting | Mounting to a DIN A plug
Magnetic base | Mounting on metal surfaces. Powering via cigar plug cable provided
-30+50
C°PCDOME
12V 24V
ON SELFextinguishingIP66AL
BASE
>40CD
1,7A 0,8A
Low intensity airport vehicle warning light engineered according to ICAO Low Intensity Type C regulations.
With a lightweight heatsink base, this device is the ideal solution for an efficient and long lasting quality warning beacon.
Provided with a flashing light, its optical reflector guarantees a 360° horizontal beam radiation and a vertical beam between +0° and +12°.
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to incandescent bulbs).
Available in amber for use with ground operation vehicles and in blue for use with airport priority vehicles.
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
TYPICAL APPLICATIONS
GROUNDOPERATIONVEHICLES
PRIORITYVEHICLES
AWL 810/CVEHICLE WARNING LIGHT
-30+50
C°PCDOME
ON SELFextinguishingIP66AL
BASE
DIN B BASE(FLAT)
DIN A BASE(PLUG)
MAGNETIC BASE
AWL 810/C | PART NO
DIN B BASE (FLAT) 51038 51041
DIN A BASE (PLUG) 51039 51042
MAGNETIC BASE 51040 51043
ICA
RO
DRAWINGS, DIMENSIONS AND WEIGHTS
Ø130
120° 1
20°
6Ø
148Ø
74 1
21
120Ø
Ø 24
120Ø
73
0,39 0,53
DIN A BASE(PLUG)
0,73
MAGNETICBASE
DIN B BASE(FLAT)
19
Multifunctional light bar available with Xenon (4 linear spotlights) or LED technology.
Permanent rear LED display (variable messages). 6 selectable languages (max. 20 pre-recorded messages for each language - max. 10 personalized messages - 10 characters).
FOLLOW-ME BAR offers different options suitable for all types of applications: radio controlled motorized search beam or camera, amber LED parking lights, H3 halogen spotlights.
Polycarbonate structure and domes.
Supplied with remote control console with backlit keys and display (version with message panel).
AM
BER
FO
LLO
W-M
E B
AR
MECHANICAL FEATURES
Polycarbonate structure and domes
OPTICAL FEATURES
Powerful LED or 10 Joules Xenon technology allowing a high intensity flashing effect
KEY CHARACTERISTICS
VOLTAGE 12V DC
LIGHT EFFECT LED FLASHING EFFECTSTROBE: 10 Joules
LIGHT INTENSITYAccording to ECE R65
PROTECTION GRADE IP55
OPERATING TEMPERATURE-30/+50 °C
AAC AAM
BE
MB
E
3
CERTIFICATIONS
e24
DRAWINGS AND DIMENSIONS
1060
382
38
4
20
0
ALSO AVAILABLE
Steady depth lightH3 55W halogen spotlights (frontal - side - amber flashing rear)
Amber parking lightsFrontal, side, rear LED spotlights
Light bars are available in different configurations with following options:
Radio controlled motorizedcameraFitted with mechanical zoom 22X + 10X digital High sensitivity lens allowingvisibility even in dim lit environments
Radio controlled motorizedsearch beamDepth or flood light 55W - 120.000 Cd(p) or 100W - 150.000 Cd(p)
CONTROL UNIT
FOLLOW-ME BAR
wL
Pmpmch
FOLLOW-ME BAR
-30+50
C° IP55PC XENON
X
ON
A
1,50
max
LED
FPM130+/-10
XENON
FPM130+/-10
A
8,5
max
FOLLOW-ME BAR | PART NO
PART NOS AVAILABLE ON REQUEST
ECE R65 TA1 E3
ECE R65 A1 E3
EMC 2006/28/CE e24
APPROVAL NUMBERS
00 7128
- 00 7007
03 1622 (12V) 03 1482 (12V)
NEW COMPACT(LED
FOLLOW-ME BAR)
NEW COMPACT(XENON
FOLLOW-ME BAR)
A
A
FOLLOW-ME BARVEHICLE WARNING LIGHT
AW
L 8
10/C
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
INSTALLATION
Flat mounting | Mounting on flat surfaces (DIN B configuration, 3 holes at 120° intervals)
Plug mounting | Mounting to a DIN A plug
Magnetic base | Mounting on metal surfaces. Powering via cigar plug cable provided
-30+50
C°PCDOME
12V 24V
ON SELFextinguishingIP66AL
BASE
>40CD
1,7A 0,8A
Low intensity airport vehicle warning light engineered according to ICAO Low Intensity Type C regulations.
With a lightweight heatsink base, this device is the ideal solution for an efficient and long lasting quality warning beacon.
Provided with a flashing light, its optical reflector guarantees a 360° horizontal beam radiation and a vertical beam between +0° and +12°.
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to incandescent bulbs).
Available in amber for use with ground operation vehicles and in blue for use with airport priority vehicles.
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
TYPICAL APPLICATIONS
GROUNDOPERATIONVEHICLES
PRIORITYVEHICLES
AWL 810/CVEHICLE WARNING LIGHT
-30+50
C°PCDOME
ON SELFextinguishingIP66AL
BASE
DIN B BASE(FLAT)
DIN A BASE(PLUG)
MAGNETIC BASE
AWL 810/C | PART NO
DIN B BASE (FLAT) 51038 51041
DIN A BASE (PLUG) 51039 51042
MAGNETIC BASE 51040 51043
ICA
RO
DRAWINGS, DIMENSIONS AND WEIGHTS
Ø130
120° 1
20°
6Ø
148Ø
74 1
21
120Ø
Ø 24
120Ø
73
0,39 0,53
DIN A BASE(PLUG)
0,73
MAGNETICBASE
DIN B BASE(FLAT)
AW
L H
ELIX
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
INSTALLATION
Pole mounting | Direct (3/4” NPT-F)
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
-25+55
C°PCALBASE DOME
ON SELFextinguishingIP65
SMD >32CD
5W
Low intensity helipad perimeter light.
With a lightweight heatsink base, this device is the ideal solution for an efficient and long lasting quality perimeter beacon.
Provided with a green steady light, this device has 2 light sources: horizontal and vertical. The horizontal light is equipped with an optical reflector that guarantees a 360° horizontal beam radiation and a vertical beam of +10°. The vertical light has a horizontal beam radiation of 360° and a vertical beam of 120°.
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to incandescent bulbs).
TYPICAL APPLICATIONS
HELIPADS
CERTIFICATIONS
IRRADIATION BEAM
HORIZONTAL LIGHT = 10°VERTICAL LIGHT = 120°
HORIZONTAL LIGHT = 360°VERTICAL LIGHT = 360°
SIDE VIEWVERTICAL IRRADIATION
TOP VIEWHORIZONTAL IRRADIATION
AWL HELIXHELIPAD PERIMETER LIGHT
0,60
DRAWINGS, DIMENSIONS AND WEIGHTS
13
1,5
D 120
ICA
RO
AWL HELIX | PART NO
AWL HELIX 12/30V DC 51012
PSU 110/240V ACDC 51011
SIDE BRACKET 51013
20
Aircraft Warning LightsICARO
CONFIGURATORAPPLICATIONWILL GUIDE YOU TO SELECT
THE BEST AWL SOLUTIONFOR YOUR OBSTACLE
MARKING NEEDS
OUR
iOS VersionWEB Versionwww.icaroawl.com/webconfigurator
MADE IN ITALYEngineered,
Developed andAssembled in
Rosta, Italy
C.so Moncenisio 5-10-12-14-16 10090 ROSTA (TO) | Italia
Tel +39.011.95.68.555 (25 linee ISDN) | Fax +39.011.95.67.928
www.sirena.it | [email protected]
R.E.A. 487901 | Mecc. TO 027549Registro Imprese TO - C.F.01047730013
Partita IVA IT 01047730013Capitale sociale € 5.000.000 di cui versato € 5.000.000
ICAROAircraft Warning Lights
GENERAL CATALOGUEICARO is Sirena’s range of high-end Aircraft Warning Lights engineered
to last and perform
www.icaroawl.com
ICARO_ENG_V1.1.0
8 010152 010453