Aircraft Obstruction Lightsaksisvyaz.narod.ru/gamma.pdf · Aircraft warning lights are lighting...
Transcript of Aircraft Obstruction Lightsaksisvyaz.narod.ru/gamma.pdf · Aircraft warning lights are lighting...
AircraftObstructionLights
Founded in 1955, INDELEC became in the nineties the world leading Early Streamer Emission
lightning protection systems manufacturer. The Group includes more than 10 branches in France
proposing a large scope of products and services for the construction industry, from the
preliminary risk assessment and technical survey up to the installation of the lightning protection
systems on site by our highly skilled technicians.
INDELEC Group
In 2004, in addition to its core business, INDELEC Group had the opportunity to enlarge its
range of products.
INDLEC Group is manufacturing a complete range of innovative and reliable lights from
Low to High Intensity, following the requirements of the ICAO. All its products are certified
by the French civil aviation authorities STNA.
_________________________________ [ 1 ] _________________________________
Aircraft warning lights are lighting devices that are attached to tall structures and are used ascollision avoidance measures. Such devices make structures more visible to passing aircraft andare usually used at night, although they may be used during the day as well.
These lights need to be visible for miles around and they are fitted on a fairly large range ofstructures:
- Buildings- Metallic towers (TV and radio broadcasting, Telecom, Lighting poles…)- High Voltage overhead lines- Bridges- Cranes- Wind turbines-Airport-Industry (Chimney)
On day time, the lights are either switched off using a dimmer or their intensity is reduced since theaircrafts pilots can see the structures. In specific cases, the local aviation authorities may requirethese structures to be marked (red and white) or fitted with warning spheres (overhead lines).
INTRODUCTION
On night time, the lights must be on permanently so a “master / slave” pair of lights is usuallyinstalled on the structure – the system switching automatically on the “slave” light if the master onefails.
_________________________________ [ 2 ] _________________________________
The main reference worldwide for Obstacle Warning Lights is the Annex 14 of the IACO convention:
Standards
_________________________________ [ 3 ] _________________________________
The Obstacle warning lights are defined by the following specifications which help the user to s
ight type according to the ICAO Annex 14 requirements:
ColorThe Lights can be RED or WHITE.
Flashing/FixedThe lights can be fixed or flashing with the ICAO requiring a range of 20 to 60 flash per minute.
Intensity (in candela cd)The light intensity is ranking from a minimum of 10cd up to 200,000 cd and above.
Low Intensity Light
• Type A : Red color, fixed, minimum 10Cd ;
• Type B : Red color, fixed, minimum 32Cd ;
Medium Intensity Light
Obstacle Warning Lights Parameters
•• TTyyppee A A :: WWhhiittee ccoolloorr,, ffllaasshhiinngg,, ddaayyttiimmee 2200,,000000CCdd,, nniigghhttttiimmee 22,,000000CCdd ;;
• Type B : Red color, flashing, nighttime only, minimum 2,000Cd;
• Type C : Red color, fixed, nighttime minimum 2,000Cd;
High Intensity Light
• Type A : White color, flashing, daytime 200,000Cd, twilight 20,000Cd, nighttime 2,000 Cd.
LifetimeDepending to the technology used (bulb lamps, LED…), the lifetime of the lights varies. Specific attention to
long life duration has to be paid since the lights are usually not easily accessible.
Power SupplyVarious options for DC (12 to 48Vdc) or AC (110Vac to 240Vac) are proposed .
Synchronization
Whenever several lights are fixed on the same structure, their flashes must be synchronized, as
well as the ON/OFF time or changes of intensity (for example, Type A Medium intensity switching
from 20,000cd on day time and 2,000cd at night time). Synchronization is available by wire,
optical fiber, GPS or TCPIP.
ConstructionThe lights are used outdoor so the IP Rating, the fixings and the temperature range the light can withstand
must be considered.
_________________________________ [ 4 ] _________________________________
LocationThe location and number of Lights is based on the height (above ground) of the structure with the following
requirements from ICAO:
Structure Height Obstacle Warning Light
Structure < 45 m Low Intensity 10cd minimum
45m > structure < 150m Medium Intensity Type A or B
and
Low Intensity type B
Structure < 150m High Intensity Type A
ICAO requirements > 45m ICAO requirements > 150m
Obstacle Warning Lights Installation
NoteThe height should be considered from the ground level or the summits of surroundings buildings.
_________________________________ [ 5 ] _________________________________
Schematic Design for structures < 45m
Building < 45m
Note:
The light must be
located between 1.5m
to 3m max from the
highest point of the
structure
Note:
The light must be
visible at 360°.
Installation at each
corner is required is
there is no
protruding structure.
Obstacle Warning Lights Installation
Construction crane < 45m
Note:
Installation at each
extremity is required.
Construction crane > 45m
Note:
Medium Intensity
flashing light is required.
_________________________________ [ 6 ] _________________________________
Schematic Design for structures from 45m to 150m high
Building > 45m
120m
80m
40m
Note:
• Roof level: Medium
Intensity Flashing
Lights
• Intermediate levels:
Low Intensity Lights
Obstacle Warning Lights Installation
Suspension bridge > 45m
Ground level
Ground level
100m
55m
Note:
• Top of piles:
Medium Intensity
Flashing Lights
• Intermediate level:
Low Intensity Lights
_________________________________ [ 7 ] _________________________________
Schematic Design for structures above 150m high
Building > 150m Industrial emission stack > 150m
222
88m
High Intensity Lights
200,000cd - Flashing
High Intensity Lights
200,000cd - Flashing
Obstacle Warning Lights Installation
MMeeddiiuumm IInntteennssiittyy LiLigghhttss
200,000cd - Flashing
MMeeddiiuumm IInntteennssiittyy LiLigghhttss
200,000cd - Flashing
Low Intensity Lights 32 cd
16
5 m
_________________________________ [ 8 ] _________________________________
Schematic Design for Wind Turbines
The installation of Obstacle Warning Lights on Wind Turbines could be governed by specific regulations. As
an example, the French regulation dated November 13, 2009 includes specific requirements:
• Medium Intensity Light type A on the top of the tower (white color, flashing, 20,000 cd during the day,
red colour, flashing, 2,000 cd during night).
• In addition, if the total height of the wind turbine (including the blades) exceeds 150m, additional Low
Intensity Type B lights are required along the Tower.
Wind Turbine Height Levels Low Intensity Type B
Lights location
150 < h < 200m 1 45 m
200 < h < 250m 2 45 et 90m
Obstacle Warning Lights Installation
Wind Turbine > 150m
250 < h < 300m 3 45, 90 et 135m
19
8m
45m
Medium Intensity Lights
20,000cd - Flashing
Low Intensity Lights 32 cd
_________________________________ [ 9 ] _________________________________
Obstacle Warning Lights Installation
Wiring requirements
The Obstacle Warning Lights are usually available in AC 230V voltage or DC Voltage (12Vdc, 24Vdc or
48Vdc).
Besides the voltage, the most important requirement of ICAO deals with the uninterruptible service. The
power supply must be equipped with a back up (UPS) to ensure the lights are still powered in case the main
power supply is down. Besides, it may also require the installation of two lights: one Master and one Slave
that will automatically start as soon as the Master light is not working properly.
Lastly, the Consultant/civil aviation authorities may also require the lights to flash altogether (for Medium
and High Intensity lights). So a main power supply cabinet might be required to synchronize the lights
flashes as well as integrating the UPS capabilities.
Schematic wiring
1 CONTROL PANEL FOR MEDIUM INTENSITY LIGHTS
1 Input voltage 230V – 1 Output voltage 48V
1 MAIN CONTROL PANEL
Input / Output voltage 230V
SPD included
Synchronisation included
Photocell included
Dry contact for failure alarm (power supply & lights)
4 MEDIUM INTENSITY LIGHTS TYPE B
Type B – 48V – 2 000 Cd
Photocell
POWER SUPPLY 230V
_________________________________ [ 10 ] _________________________________
3
Our Range of Product
LEDS obstruction light
Solar obstruction light
Neon obstruction ligth
UPS system
Conductor marking light
Runway lighting
Mast and windsocks
_________________________________ [ 11 ] _________________________________
4
Obstruction lights > Low Intensity LEDLBIA Type A > 10 Cd - Direct Current
_________________________________ [ 12 ] _________________________________
5
*as per installation conditions
Désignation : COTE LBIAxxxC
Echelle : 2/3 Date : 30-05-2013Format : A4
INDICE : 0
Matière :
Réf : 130530 1330 BM
Validation :
50
Ø120
170
Ø6,5Mini
Ø30Mini
25
Désignation : CABLE LBI AC &DC
Echelle : 2 Date : 04-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130604 1000 BM
Validation :
LN21
L2 3 4
N1
2 3 41 21+- +-
2 3 41
2 3 41
1 2
1 2
Obstruction lights > Low Intensity LEDLBIA Type A > 10 Cd - Direct Current
Mounting
_________________________________ [ 13 ] _________________________________
6
Obstruction lights > Low Intensity LEDLBIA Type A > 10 Cd - Alternative Current
_________________________________ [ 14 ] _________________________________
7
d
*as per installation conditions
Obstruction lights > Low Intensity LEDLBIA Type A > 10 Cd - Alternative Current
Désignation : CABLE LBI AC &DC
Echelle : 2 Date : 04-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130604 1000 BM
Validation :
LN21
L2 3 4
N1
2 3 41 21+- +-
2 3 41
2 3 41
1 2
1 2
Désignation : COTE LBIAxxMC
Echelle : 1/2 Date : 17-06-2013Format : A4
INDICE : 1
Matière :
Réf : 121211 1045 BM
Validation :
225
Ø120
50Ø6,5Mini
Ø30Mini
25
Mounting
_________________________________ [ 15 ] _________________________________
8
Obstruction lights > Low Intensity LEDLBIA Type A > 10 Cd - Zamac Box
_________________________________ [ 16 ] _________________________________
9
*as per installation conditions
Drilling
Obstruction lights > Low Intensity LEDLBIA Type A > 10 Cd - Zamac Box
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Désignation : BOITIER TWINY
Echelle : 1/4 Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
325
246
186
2364xM8
10
L L
Ø40Ø60Ø80
Ø120
Ø40Ø60Ø80
Ø120
SCREWLENGTHØ : L :
Ø40 50Ø60 70Ø80 90
Ø100 110Ø120 130
Désignation : IMPLAN
TATION
BOITIER TW
INY
Echelle : 1/2Date : 07-06-2013
Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
186
2364x8,5
Mounting
_________________________________ [ 17 ] _________________________________
10
Obstruction lights > Low Intensity LEDLBIA Type A > 10 Cd - TWINY
_________________________________ [ 18 ] _________________________________
11
*as per installation conditions
Obstruction lights > Low Intensity LEDLBIA Type A > 10 Cd - TWINY
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Désignation : IMPLAN
TATION
BOITIER TW
INY
Echelle : 1/2Date : 07-06-2013
Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
186
2364x8,5
Désignation : BOITIER TWINY
Echelle : 1/4 Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
325
246
186
2364xM8
10
L L
Ø40Ø60Ø80
Ø120
Ø40Ø60Ø80
Ø120
SCREWLENGTHØ : L :
Ø40 50Ø60 70Ø80 90
Ø100 110Ø120 130
Désignation : COTE LBIATWxC
Echelle : 1/5 Date : 19-02-2013Format : A4
INDICE : 1
Matière :
Réf : 121211 1145 BM
Validation :
4 xM8
186
236
255
420
450
Mounting
_________________________________ [ 19 ] _________________________________
12
Obstruction lights > Low Intensity LEDLBIB Type B > 32 Cd - Direct Current
_________________________________ [ 20 ] _________________________________
13
*as per installation conditions
Obstruction lights > Low Intensity LEDLBIB Type B > 32 Cd - Direct Current
Désignation : COTE LBIBxxxC
Echelle : 1/2 Date : 30-05-2013Format : A4
INDICE : 0
Matière :
Réf : 130530 1400 BM
Validation :22
5
Ø120
50Ø6,5Mini
Ø30Mini
25
Désignation : CABLE LBI AC &DC
Echelle : 2 Date : 04-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130604 1000 BM
Validation :
LN21
L2 3 4
N1
2 3 41 21+- +-
2 3 41
2 3 41
1 2
1 2
Mounting
_________________________________ [ 21 ] _________________________________
14
Obstruction lights > Low Intensity LEDLBIB Type B > 32 Cd - Alternative Current
_________________________________ [ 22 ] _________________________________
15
*as per installation conditions
Wiring
Obstruction lights > Low Intensity LEDLBIB Type B > 32 Cd - Alternative Current
Désignation : CABLE LBI AC &DC
Echelle : 2 Date : 04-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130604 1000 BM
Validation :
LN21
L2 3 4
N1
2 3 41 21+- +-
2 3 41
2 3 41
1 2
1 2
Désignation : COTE LBIBxxxC
Echelle : 1/2 Date : 30-05-2013Format : A4
INDICE : 0
Matière :
Réf : 130530 1400 BM
Validation :
225
Ø120
50Ø6,5Mini
Ø30Mini
25
Mounting
_________________________________ [ 23 ] _________________________________
16
Obstruction lights > Low Intensity LEDLBIB Type B > 32 Cd - Zamac Box
_________________________________ [ 24 ] _________________________________
17
*as per installation conditions
Obstruction lights > Low Intensity LEDLBIB Type B > 32 Cd - Zamac Box
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Désignation : IMPLAN
TATION
BOITIER TW
INY
Echelle : 1/2Date : 07-06-2013
Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
186
2364x8,5
Désignation : LBIBMZ MONTAGE AVEC UN TUBE VERTICAL
Echelle : 1/3 Date : 12-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130612 1100 BM
Validation :
TUBE Ø44
Désignation : BOITIER TWINY
Echelle : 1/4 Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
325
246
186
2364xM8
10
L L
Ø40Ø60Ø80
Ø120
Ø40Ø60Ø80
Ø120
SCREWLENGTHØ : L :
Ø40 50Ø60 70Ø80 90
Ø100 110Ø120 130
Drilling
Mounting
_________________________________ [ 25 ] _________________________________
18
Obstruction lights > Low Intensity LEDLBIB Type B > 32 Cd - TWINY
_________________________________ [ 26 ] _________________________________
*as per installation conditions
Obstruction lights > Low Intensity LEDLBIB Type B > 32 Cd - TWINY
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Désignation : IMPLAN
TATION
BOITIER TW
INY
Echelle : 1/2Date : 07-06-2013
Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
186
2364x8,5
Désignation : BOITIER TWINY
Echelle : 1/4 Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
325
246
186
2364xM8
10
L L
Ø40Ø60Ø80
Ø120
Ø40Ø60Ø80
Ø120
SCREWLENGTHØ : L :
Ø40 50Ø60 70Ø80 90
Ø100 110Ø120 130
Mounting
_________________________________ [ 27 ] _________________________________
20
Obstruction lights > Medium Intensity LEDLMIA Type A - White Flash
20
_________________________________ [ 28 ] _________________________________
21
*as per installation conditions
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Désignation : IMPLAN
TATION
BOITIER TW
INY
Echelle : 1/2Date : 07-06-2013
Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
186
2364x8,5
Désignation : COTE LMIA
Echelle : 1/5 Date : 11-12-2012Format : A4
VERSION : ind 0
Matière :
Réf : 121211 1300BM
Validation :
43541
0
Ø410
186
236
R4,5
Désignation : BOITIER TWINY
Echelle : 1/4 Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
325
246
186
2364xM8
10
L L
Ø40Ø60Ø80
Ø120
Ø40Ø60Ø80
Ø120
SCREWLENGTHØ : L :
Ø40 50Ø60 70Ø80 90
Ø100 110Ø120 130
Obstruction lights > Medium Intensity LEDLMIA Type A - White Flash
Mounting
_________________________________ [ 29 ] _________________________________
22
Obstruction lights > Medium Intensity LEDLMIB Type B - Red Flash
20
_________________________________ [ 30 ] _________________________________
23
*as per installation conditions
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Désignation : IMPLAN
TATION
BOITIER TW
INY
Echelle : 1/2Date : 07-06-2013
Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
186
2364x8,5
Désignation : COTE LMIB
Echelle : 1/5 Date : 11-12-2012Format : A4
VERSION : ind 0
Matière :
Réf : 121211 1400BM
Validation :
Ø410Ø410
365
186
236
R4,5
Désignation : BOITIER TWINY
Echelle : 1/4 Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
325
246
186
2364xM8
10
L L
Ø40Ø60Ø80
Ø120
Ø40Ø60Ø80
Ø120
SCREWLENGTHØ : L :
Ø40 50Ø60 70Ø80 90
Ø100 110Ø120 130
Obstruction lights > Medium Intensity LEDLMIB Type B - Red Flash
Mounting
_________________________________ [ 31 ] _________________________________
24
Obstruction lights > Medium Intensity LEDLMIC Type C - Red Steady Burning
20
_________________________________ [ 32 ] _________________________________
25
*as per installation conditions
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Désignation : IMPLAN
TATION
BOITIER TW
INY
Echelle : 1/2Date : 07-06-2013
Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
186
2364x8,5
Désignation : COTE LMIB
Echelle : 1/5 Date : 11-12-2012Format : A4
VERSION : ind 0
Matière :
Réf : 121211 1400BM
Validation :
Ø410Ø410
365
186
236
R4,5
Désignation : BOITIER TWINY
Echelle : 1/4 Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
325
246
186
2364xM8
10
L L
Ø40Ø60Ø80
Ø120
Ø40Ø60Ø80
Ø120
SCREWLENGTHØ : L :
Ø40 50Ø60 70Ø80 90
Ø100 110Ø120 130
Obstruction lights > Medium Intensity LEDLMIC Type C - Red Steady Burning
Mounting
_________________________________ [ 33 ] _________________________________
26
Obstruction lights > Medium Intensity LEDLMIAB Type A & B - White Flash and Red Flash
_________________________________ [ 34 ] _________________________________
27
*as per installations conditions
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Désignation : IMPLAN
TATION
BOITIER TW
INY
Echelle : 1/2Date : 07-06-2013
Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
186
2364x8,5
Désignation : COTE LMIAB
Echelle : 1/5 Date : 11-12-2012Format : A4
VERSION : ind 0
Matière :
Réf : 121211 1330BM
Validation :
435
410
Ø410
236
186
R4,5
Désignation : BOITIER TWINY
Echelle : 1/4 Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
325
246
186
2364xM8
10
L L
Ø40Ø60Ø80
Ø120
Ø40Ø60Ø80
Ø120
SCREWLENGTHØ : L :
Ø40 50Ø60 70Ø80 90
Ø100 110Ø120 130
Obstruction lights > Medium Intensity LEDLMIAB Type A & B - White Flash and Red Flash
Mounting
_________________________________ [ 35 ] _________________________________
28
Obstruction lights > Medium Intensity LEDLMIAC Type A & B - White Flash and Red Steady Burning
_________________________________ [ 36 ] _________________________________
29
*as per installations conditions
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Désignation : IMPLAN
TATION
BOITIER TW
INY
Echelle : 1/2Date : 07-06-2013
Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
186
2364x8,5
Désignation : COTE LMIAB
Echelle : 1/5 Date : 11-12-2012Format : A4
VERSION : ind 0
Matière :
Réf : 121211 1330BM
Validation :
435
410
Ø410
236
186
R4,5
Désignation : BOITIER TWINY
Echelle : 1/4 Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
325
246
186
2364xM8
10
L L
Ø40Ø60Ø80
Ø120
Ø40Ø60Ø80
Ø120
SCREWLENGTHØ : L :
Ø40 50Ø60 70Ø80 90
Ø100 110Ø120 130
Obstruction lights > Medium Intensity LEDLMIAC Type A & C - White Flash and steady burning
Mounting
Width
_________________________________ [ 37 ] _________________________________
30
Obstruction lights > High Intensity LEDLHIA Type A - White Flash
_________________________________ [ 38 ] _________________________________
31
*as per installation conditions
Obstruction lights > High Intensity LEDLHIA Type A - White Flash
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Mounting
_________________________________ [ 39 ] _________________________________
33
Obstruction lights > Low Intensity LEDSOLBIA Type A > 10 Cd - Solar
_________________________________ [ 40 ] _________________________________
34
*as per installation conditions
Obstruction lights > Low Intensity LEDSOLBIA Type A > 10 Cd - Solar
Désignation : BOITIER TWINY
Echelle : 1/4 Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
325
246
186
2364xM8
10
L L
Ø40Ø60Ø80
Ø120
Ø40Ø60Ø80
Ø120
SCREWLENGTHØ : L :
Ø40 50Ø60 70Ø80 90
Ø100 110Ø120 130
Désignation : IMPLAN
TATION
BOITIER TW
INY
Echelle : 1/2Date : 07-06-2013
Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
186
2364x8,5
Mounting
_________________________________ [ 41 ] _________________________________
35
Th
Th
Obstruction lights > Low Intensity LEDSOLBIA Type A > 10 Cd - Solar TWINY
_________________________________ [ 42 ] _________________________________
36
*as per installation conditions
Obstruction lights > Low Intensity LEDSOLBIA Type A > 10 Cd - Solar TWINY
Désignation : BOITIER TWINY
Echelle : 1/4 Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
325
246
186
2364xM8
10
L L
Ø40Ø60Ø80
Ø120
Ø40Ø60Ø80
Ø120
SCREWLENGTHØ : L :
Ø40 50Ø60 70Ø80 90
Ø100 110Ø120 130
Désignation : IMPLAN
TATION
BOITIER TW
INY
Echelle : 1/2Date : 07-06-2013
Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
186
2364x8,5
Mounting
_________________________________ [ 43 ] _________________________________
37
B
B
B
Obstruction lights > Low Intensity LEDSOLBIB Type B > 32 Cd - Solar
_________________________________ [ 44 ] _________________________________
38
*as per installation conditions
Obstruction lights > Low Intensity LEDSOLBIB Type B > 32 Cd - Solar
Désignation : COTE SOLBIB__
Echelle : 1/6 Date : 30-04-2013Format : A4
INDICE : 2
Matière :
Réf : 130227 1700 BM
Validation :
4 xM8186
236
480
700550
10
Désignation : BOITIER TWINY
Echelle : 1/4 Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
325
246
186
2364xM8
10
L L
Ø40Ø60Ø80
Ø120
Ø40Ø60Ø80
Ø120
SCREWLENGTHØ : L :
Ø40 50Ø60 70Ø80 90
Ø100 110Ø120 130
Désignation : IMPLAN
TATION
BOITIER TW
INY
Echelle : 1/2Date : 07-06-2013
Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
186
2364x8,5
Mounting
_________________________________ [ 45 ] _________________________________
39
ThB
B
Th B
Obstruction lights > Low Intensity LEDSOLBIB Type B > 32 Cd - Solar TWINY
_________________________________ [ 46 ] _________________________________
40
*as per installation conditions
Obstruction lights > Low Intensity LEDSOLBIB Type B > 32 Cd - Solar TWINY
Désignation : COTE SOLBIBTW__
Echelle : 1/6 Date : 30-04-2013Format : A4
INDICE : 2
Matière :
Réf : 130227 1700 BM
Validation :
4 xM8186
236
480
700550
10
Désignation : BOITIER TWINY
Echelle : 1/4 Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
325
246
186
2364xM8
10
L L
Ø40Ø60Ø80
Ø120
Ø40Ø60Ø80
Ø120
SCREWLENGTHØ : L :
Ø40 50Ø60 70Ø80 90
Ø100 110Ø120 130
Désignation : IMPLAN
TATION
BOITIER TW
INY
Echelle : 1/2Date : 07-06-2013
Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
186
2364x8,5
Mounting
_________________________________ [ 47 ] _________________________________
41
Obstruction lights > Low Intensity NEONSBA 30 Type B > 32 Cd
_________________________________ [ 48 ] _________________________________
42
Obstruction lights > Low Intensity NEONSBA 30 Type B > 32 Cd
Désignation : CABLE LBI AC &DC
Echelle : 2 Date : 04-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130604 1000 BM
Validation :
LN21
L2 3 4
N1
2 3 41 21+- +-
2 3 41
2 3 41
1 2
1 2
Désignation : CABLE LBI AC &DC
Echelle : 2 Date : 04-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130604 1000 BM
Validation :
LN21
L2 3 4
N1
2 3 41 21+- +-
2 3 41
2 3 41
1 2
1 2
Mounting
_________________________________ [ 49 ] _________________________________
Obstruction lights > Low Intensity NEONSBA 30 Type B > 32 Cd - Zamac Box
_________________________________ [ 50 ] _________________________________
44
Obstruction lights > Low Intensity NEONSBA 30 Type B > 32 Cd - Zamac Box
Désignation : IMPLAN
TATION
BOITIER TW
INY
Echelle : 1/2Date : 07-06-2013
Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
186
2364x8,5
Désignation : BOITIER TWINY
Echelle : 1/4 Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
325
246
186
2364xM8
10
L L
Ø40Ø60Ø80
Ø120
Ø40Ø60Ø80
Ø120
SCREWLENGTHØ : L :
Ø40 50Ø60 70Ø80 90
Ø100 110Ø120 130
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Mounting
_________________________________ [ 51 ] _________________________________
45
Obstruction lights > Low Intensity NEONSBA 30 Type B > 32 Cd - TWINY
_________________________________ [ 52 ] _________________________________
46
Obstruction lights > Low Intensity NEONSBA 30 Type B > 32 Cd - TWINY
Désignation : IMPLAN
TATION
BOITIER TW
INY
Echelle : 1/2Date : 07-06-2013
Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
186
2364x8,5
Désignation : BOITIER TWINY
Echelle : 1/4 Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
325
246
186
2364xM8
10
L L
Ø40Ø60Ø80
Ø120
Ø40Ø60Ø80
Ø120
SCREWLENGTHØ : L :
Ø40 50Ø60 70Ø80 90
Ø100 110Ø120 130
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Désignation : O1CZ / 01MZ / MI
Echelle : SLC Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1530 BM
Validation :
- + N LCom NC
Com NC
01CZ
- + N LCom NC
Com NC
01MZ
S D S D
MI
- + - +
Mounting
_________________________________ [ 53 ] _________________________________
47
Power supply > Safety Power SupplySafebox for Low Intensity Lights
_________________________________ [ 54 ] _________________________________
48
*as per installations conditions
Power supply > Safety Power SupplySafebox for Low Intensity Lights
Mounting
_________________________________ [ 55 ] _________________________________
49
d
Power supply > Safety Power SupplySafebox for Medium Intensity Lights
_________________________________ [ 56 ] _________________________________
50
Stal
*as per installations conditions
Power supply > Safety Power SupplySafebox for Low Intensity Lights
Désignation : COTE COFFRE A BATTERIE 4x100Ah
Echelle : 1/5 Date : 23-10-2012Format : A4
VERSION : ind 1
Matière : RAL 9010
Réf : 121023 1500BM
Validation :
Désignation : COTE COFFRE A BATTERIE 4x24Ah
Echelle : 1/4 Date : 23-10-2012Format : A4
INDICE : 1
Matière : RAL 9010
Réf : 121023 1530 BM
Validation :
250
615
R5
105
Mounting
_________________________________ [ 57 ] _________________________________
51
Aicraft Warning Marker > High Voltage LinesWarning sphere
_________________________________ [ 58 ] _________________________________
52
Aicraft Warning Marker > High Voltage LinesWarning sphere
Mounting
_________________________________ [ 59 ] _________________________________
53
Runway lighting > Low Intensity LEDBPLBIA Type A > 10 CD - Portable Light
_________________________________ [ 60 ] _________________________________
54
*as per installations conditions
Obstruction lights > High Voltage LinesLBIA Type A > 10 CD
Mounting
_________________________________ [ 61 ] _________________________________
55
Wind indicator direction > STNA Mast7,40 Meters
STNABG100E6
_________________________________ [ 62 ] _________________________________
56
Wind indicator direction > STNA Mast7,40 Meters
Désignation : MAT STNA 7.4M
Echelle : 1/40 Date : 14-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130614 1115 BM
Validation :
7400
7100
4000
Mounting
_________________________________ [ 63 ] _________________________________
Désignation : COTE MAT FAA 3M
Echelle : 1 Date : 20-02-2013Format : A4
INDICE : 0
Matière :
Réf : 130220 1645 BM
Validation :
Wind indicator direction > FAA Mast3 or 6 Meters
57
_________________________________ [ 64 ] _________________________________
58
a
Wind indicator direction > FAA Mast3 or 6 Meters
Mounting
_________________________________ [ 65 ] _________________________________
59
meters
Wind indicator direction > Simple Mast
_________________________________ [ 66 ] _________________________________
60
Wind indicator direction > FAA Mast3 or 6 Meters
Mounting
_________________________________ [ 67 ] _________________________________
61
Wind indicator direction > Windsocks
Mounting
_________________________________ [ 68 ] _________________________________
62
-
-
- Mounting
Runway lighting > Truncated cone and dihedral beacon
_________________________________ [ 69 ] _________________________________
Runway lighting > Low Intensity LED BPLBIA Type A > Cd - Portable Light
63
_________________________________ [ 70 ] _________________________________
64
10
*as per installations conditions
Runway lighting > Low Intensity LEDBPLBIA Type A > Cd - Portable Light
Désignation : BOITIER TWINY
Echelle : 1/2 Date : 07-06-2013Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
186
236
4xM8
10
Désignation : IMPLAN
TATION
BOITIER TW
INY
Echelle : 1/2Date : 07-06-2013
Format : A4
INDICE : 0
Matière :
Réf : 130607 1400 BM
Validation :
186
2364x8,5
Mounting
_________________________________ [ 71 ] _________________________________