Air Plant and Instruments.pdf
-
Upload
eduardo-muniz -
Category
Documents
-
view
227 -
download
0
Transcript of Air Plant and Instruments.pdf
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 1/104
Manufacturing and process plants use compressed air as a power supply
for many devices within the plant. Plant air, also called shop air, is used for
cooling and as a power source for pneumatic tools, sand blasters, sprayers,
conveyors, robotics, and other mechanical tools. Instrument air is used to
power instruments, such as controllers, positioners, switching valves, panel
loaders, and volume boosters.
Plant air or shop air runs from the compressor throughout the plant.Pressure reducing regulators control the pressure to devices at each point
of use off the air line.
Instrument air lines can come from the plant air line, or they may be separate
air lines throughout the plant. In either case, the air supplied to the
instruments must be cleaned and dried before it enters the instruments.
Filters and dryers remove dust, moisture, and other debris from the air.
AIR
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 2/104
High Pressure Source(Instrument Supply AIr)
VALVE ACCESSORIES
CONTROL VALVE
Controllersand Positioners
1301F
Page 83
1367
Page 87
67CFR
Page 1364
Page 10
164A
Page40
167A
Page
43
2625
Page 89
670 Page 71
Introduction
Fisher ® brand regulators for plant air
applications are available from the smallest to
the largest flows and in all pressure ranges.
Also available are a variety of control valve
accessories, such as air supply regulators,
switching valves, panel loaders, controllers,
and volume boosters. These accessories can
be ordered as individual units, or they may
Application: Air Solutions
be included as part of a control valve. Your
local Sales Office is available to assist you
in selecting the correct control equipment for
your application.
Fisher brand air supply regulators are
compact, rugged, and easy to maintain. These
small volume regulators are available as stand
alone units or panel mounted.
They are also available with integral filters
and internal relief and offer the ease of in-line
maintenance. No special tools are required
for maintenance.
Contact your local Sales Office with your
plant air application questions. We offer
solutions that will help you manage your
process better.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 3/104
Compressor
Instrument Air
Plant Process
CONTROL VALVE
Plant Air
To Conveyor
T o C o o l i n
g S y
s t e m
T o S p r
a y e r
627
Page 55
1098EGR
Page 74
67CFRPage 13
64
Page 10
AIR APPLICATION M AP
Features
• Integral Filters
• Technical Support
• Smallest to Largest Flows
• Compact
• Wide Product Selection
• Built to Last
• Time-Proven Design
• Rugged Construction
• 0 to 6000 psig (0 to 414 bar)
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 4/104
4
INSTRUMENT
SUPPLY
REGULATORS
MAXIMUM INLET
PRESSURE
OUTLET
PRESSURE RANGE
MAXIMUM
CAPACITY
TYPE
NUMBER
3 to 150 psig
(0,21 to 10,3 bar)
0 to 150 psig
(0 to 10,3 bar)
5 to 35 psig
(0,34 to 2,4 bar)
10 to 500 psig
(0,69 to 34,5 bar)
4600 SCFH
(123 Nm3 /h)
4350 SCFH
(117 Nm3 /h)
1100 SCFH
(29 Nm3 /h)
4500 SCFH
(121 Nm3 /h)
250 psig
(17,2 bar)
400 psig
(27,6 bar)
2000 psig
(138 bar)
6000 psig
(414 bar)
64 Series
Page 10
67C Series
Page 13
Type 1367
Page 87
1301 Series
Page 83
AIR Q UICK S ELECTION G UIDE
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 5/104
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 6/104
6
RELIEF SET
PRESSURE RANGE
MAXIMUM
CAPACITY
TYPE
NUMBER
93 000 SCFH
(2492 Nm3 /h)
151 125 SCFH
(4050 Nm3 /h)
26 784 SCFH
(718 Nm3 /h)
4000 SCFH
(107 Nm3 /h)
5-inches w.c. to 75 psig
(12 mbar to 5,2 bar)
25 to 300 psig
(1,7 to 20,7 bar)
35 to 350 psig
(2,4 to 24,1 bar)
39 to 44 psig
(2,7 to 3,0 bar)
289 Series
Page 48
Type H200
Page 93
Type H120
Page 91
Type H800
Page 95
RELIEF VALVE/
BACKPRESSUREREGULATORS
AIR Q UICK S ELECTION G UIDE
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 7/104
7
SET PRESSURE
RANGE
TYPE
NUMBER
3 to 60 psig
(0,21 to 4,1 bar)
3 to 200 psig
(0,21 to 13,8 bar)
Type 119
Page 37
Type 164
Page 40
TWO-WAY SWITCHING
VALVES (On/Off)
SET PRESSURERANGE
TYPENUMBER
2 to 60 psig
(0,14 to 4,1 bar)
3 to 100 psig
(0,21 to 6,9 bar)
5 to 100 psig
(0,34 to 6,9 bar)
35 to 150 psig
(2,4 to 10,3 bar)
Manual Switch
Type 168
Page 45
Type 164A
Page 40
THREE-WAY
SWITCHING VALVESType 167A
Page 43
Type 168H
Page 45
Type 68-2
Page 45
AIR Q UICK S ELECTION G UIDE
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 8/104
8
DESCRIPTION
TYPE
NUMBER
Stand Alone Pressure
Reducing Regulator with Handwheel
Panel with One Gauge and Type 67CR
Pressure Reducing Regulator
Panel with Two Gauges and Type 67CR
Pressure Reducing Regulator
Panel with Two Gauges, Three-Way
Changeover Valve, and Type 67CR
Pressure Reducing Regulator
67C Series
Page 13
670
Page 71PANEL MOUNTED
LOADING REGULATORS
670G
Page 71
670GV
Page 71
SUPPLY FLOWEXHAUST
FLOWTYPE
NUMBER
15 700 SCFH
(421 Nm3 /h)
26 400 SCFH
(708 Nm3 /h)Type 2625
Page 89
VOLUME BOOSTERS
AIR Q UICK S ELECTION G UIDE
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 9/104
9
AIR APPLICATIONS
INTRODUCTION
This Application Guide briefly explains the
air products contained in this section.
TYPES OF REGULATORS
Instrument Supply Regulators
Instrument supply regulators are used
to control air pressure to controllers,
positioners, volume boosters, panel
loaders, switching valves, and other control
equipment. Many of these regulators have
integral filters to help remove dust, dirt, and
other particles from the air before it enters
the instruments. These regulators can be
nipple mounted, bolted to the actuator, or
panel mounted.
Pressure Reducing Regulators
In some applications, the pipeline pressure
may need to be reduced for a process or
piece of equipment. Depending upon the
accuracy required by the application, a
direct-operated or pilot-operated regulator
can be used to reduce the air pressure.
Direct-operated regulators are used for
lower flow rates. Pilot-operated regulators
are used for high flow rates or where precise
pressure control is required.
Relief Valves/Backpressure Regulators
A relief valve or backpressure regulator
opens when the upstream controlled
pressure increases above the setpoint. Relief
valves and backpressure regulators are the
same devices. The name is determined by
the application.
Overpressure protection is provided by
relieving pressure when it rises above the
setpoint. When upstream pressure rises
above the setpoint, the relief valve opens
to allow excess upstream pressure to flow
downstream into a pressurized system or
to atmosphere.
PANEL LOADERS
Panel-mounted loading regulators are used
for remote pressure adjustment of regulators
or for manual control of actuators and
control valves.
The manual loading regulators are available
in four basic configurations: A stand
alone regulator; a panel with one gauge
and a pressure reducing regulator; a panel
with two gauges and a pressure reducing
regulator; and a panel with two gauges, a
three-way changeover valve, and a pressure
reducing regulator.
A panel with one gauge and a pressure
reducing regulator contains a Type 67CR
pressure reducing regulator with token
internal relief and a gauge that indicates the
regulator’s outlet pressure. A two gauge
panel is similar to the single gauge panelwith an additional gauge to monitor another
pressure, up to 100 psig (6,9 bar).
A two gauge panel with a three-way
changeover valve typically provides manual
backup for pneumatic controllers. The
changeover valve allows an operator to
select either the manual loader output or an
automatic controller output as the signal to
an actuator and valve.
VOLUME BOOSTERS
Volume boosters are used on control valveactuators to increase the stroking speed of a
control valve.
SWITCHING VALVES
Switching valves are used in pneumatic
logic systems. These valves are for either
two-way or three-way switching.
Two-way switching valves are used for
on/off service in pneumatic systems.
Three-way switching valves divert inlet
pressure from one outlet port to another
whenever the sensed pressure exceeds or
drops below a preset limit.
Figure 1. Backpressure Application to Maintain Air Supply to Priority Systems
A backpressure regulator can be used to monitor and direct the supply pressure. In normal operation, this regulator is wide-open allowing air supply to all
systems. If the supply pressure drops below the backpressure regulator’s setpoint, the backpressure regulator closes to block the air flow to non-priority systems
and directs the remaining air supply to the priority systems.
PRIORITY SYSTEM
INSTRUMENT AIR
PLANT AIR
NON-PRIORITY SYSTEM
AIR SOURCE
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 10/104
64 Series Instrument Supply Regulators
10
AIR P RODUCTS
Introduction
The 64 Series regulators are typically used to
provide reduced pressures to pneumatic and
electropneumatic instruments. The Type 64R has
token internal relief. The 64 Series regulators are
suitable for other air applications, including air
chucks, air jets, and spray guns.
Body Size and End Connection Style
End: 1/2-inch threaded NPT
Side Outlet: 1/4-inch threaded NPT
Spring Case Vent
1/4-inch threaded NPT with screen
Flow Coefficients
Wide-Open Cg: 35.6
Wide-Open Cv: 0.91
C1: 39
K m: 0.72
IEC Sizing Coefficients
XT: 0.96
FD: 0.58
FL: 0.85
Pressure Registration
Internal
Maximum Inlet Pressure
250 psig (17,2 bar)
Maximum Outlet Pressure
Operating: 150 psig (10,3 bar)
Emergency: 220 psig (15,2 bar)
Outlet Pressure Ranges
3 to 150 psig (207 mbar to 10,3 bar)
in six ranges.
See Table 1
Temperature Capabilities
Nitrile (NBR):
-20° to 150°F (-29° to 66°C)
Fluoroelastomer (FKM):
0º to 300ºF (-18º to 149ºC)
Approximate Shipping Weight
2.25 pounds (1,0 kg)
Additional Technical Data
For more technical information, contact
your local Sales Ofce or log on to:
www.emersonprocess.com/regulators
Figure 1. 64 Series Pressure Regulator
W1943
Figure 3. Dimensions
2.75(69,9)
1.56(39,6)
1/2-INCH NPT
1/4-INCH NPT SIDE OUTLET
1/4-INCH NPT SCREENED VENT
4.12
(105)
8.25
(210)MAXIMUM
INCHES
(mm)
A0813_1
• Versatility
• Body Side Connection • Easy Maintenance
• Sour Gas Service Capability
Features
Figure 2. 64 Series Operational Schematic
M1024
INLET PRESSURE
OUTLET PRESSURE
ATMOSPHERIC PRESSURE
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 11/104
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 12/104
64 Series Instrument Supply Regulators
12
AIR P RODUCTS
Ordering Guide
Type (Select One)
64 (no token internal relief)***
64R (token internal relief)***
Outlet Pressure Range (Select One)
3 to 15 psig (207 mbar to 1 bar)***
3 to 20 psig (207 mbar to 1,4 bar)***
5 to 35 psig (0,3 to 2,4 bar)***
30 to 60 psig (2,1 to 4,1 bar)*** 35 to 100 psig (2,4 to 6,9 bar)***
80 to 150 psig (5,5 to 10,3 bar)***
Diaphragm and Disk (Select One)
Nitrile (NBR) Diaphragm and Neoprene (CR) Disk***
Fluoroelastomer (FKM)**
Pressure Gauge (Optional)
Yes***
Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match this order.
Specication Worksheet
Application:
Specic Use
Line Size
Fluid Type
Specic Gravity
Temperature
Does the Application Require Overpressure Protection?
Yes No
Pressure:
Maximum Inlet Pressure
Minimum Inlet Pressure
Differential Pressure
Set Pressure
Maximum Flow
Accuracy Requirements:
Less Than or Equal To:
5% 10% 20% 40%
Construction Material Requirements (if known):
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your local
Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your local
Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 13/104
67C Series Instrument Supply Regulators
13
AIR P RODUCTS
Introduction
The 67C Series regulators are typicallyused to provide constantly controlled,reduced pressures to pneumatic andelectropneumatic controllers and otherinstruments. These direct-operatedregulators are suitable for most air or gasapplications. Other applications include providing reduced pressures to air chucks,air jets, and spray guns.
Body Size and End Connection Style
1/4-inch threaded NPT
Wide-Open Flow Coefficients
Main Valve: Cg: 11.7; C
v: 0.36; C
1: 32.2
Internal Relief Valve: C
g: 1.45; C
v: 0.045; C
1: 32.8
IEC Sizing Coefficients
XT: 0.66; F
D: 0.50; F
L: 0.89; K
m: 0.79
Pressure Registration
Internal
Outlet Pressure Ranges
0 to 150 psig (0 to 10,3 bar) in several
ranges. See Table 1
Figure 1. A 67C Series Instrument
Supply Regulator
W8438
Figure 2. A 67CF Series Filter Regulator shown
with Optional Pressure Gauge
W7412
Table 1. Outlet Pressure Ranges and Control Spring Data
TYPESOUTLET PRESSURE RANGES,
PSIG (bar)
CONTROL SPRING DATA
Color Material Part Number Wire Diameter, Inches (mm)
67C, 67CR,
67CF, 67CFR
0 to 20
0 to 35
0 to 60
0 to 125
(0 to 1,4)
(0 to 2,4)
(0 to 4,1)
(0 to 8,6)
Green stripe
Silver
Blue stripe
Red stripe
Music Wire
GE07809T012
T14059T0012
T14058T0012
T14060T0012
0.135
0.156
0.170
0.207
(3,43)
(3,96)
(4,32)
(5,26)
0 to 35
0 to 60
0 to 125
(0 to 2,4)
(0 to 4,1)
(0 to 8,6)
Silver stripe
Blue
Red
Inconel
T14113T0012
T14114T0012
T14115T0012
0.156
0.172
0.207
(3,96)
(4,37)
(5,26)
67CS, 67CSR,
67CFS, 67CFSR
0 to 20
0 to 35
0 to 60
0 to 125
0 to 150
(0 to 1,4)
(0 to 2,4)
(0 to 4,1)
(0 to 8,6)
(0 to 10,3)
Green
Silver stripe
Blue
Red
Black
Inconel
10C1729X012
T14113T0012
T14114T0012
T14115T0012
10C1730X012
0.135
0.156
0.172
0.207
0.250
(3,43)
(3,96)
(4,37)
(5,26)
(6,35)
Features
• Designed for DigitalInstrumentation
• Optional Smart BleedTM
Construction• Optional Stainless Steel
Construction• Compact and Light Weight• No Air Loss• Easy Maintenance
• Optional Integral Filter• Optional Internal Relief Valve• Rugged Construction• NACE Construction Available
Maximum Emergency Outlet Pressure
50 psi (3,4 bar) over outlet pressure setting
Maximum Inlet Pressure (Body Rating)
Types 67C, 67CR, 67CF, 67CFR,67CFS, and 67CFSR:
250 psig (17,2 bar)Types 67CS and 67CSR:400 psig (27,6 bar)
Temperature Capabilities
With Nitrile (NBR)
Standard Bolting: -20° to 180°F (-29° to 82°C)Stainless Steel Bolting: -40° to 180°F (-40° to 82°C)With Fluoroelastomer (FKM):
0° to 300°F (-18° to 149°C)With Silicone (VMQ) Diaphragm andLow Temperature Bolting: -60° to 180°F (-51° to 82°C)With Gauges:-20° to 180°F (-29° to 82°C)
Types 67CR, 67CSR, 67CFR, and 67CFSR
Internal Relief Performance
Low capacity for minor seat leakage only;
other overpressure protection must be providedif inlet pressure can exceed the maximum
pressure rating of downstream equipment orexceeds maximum outlet pressure rating ofthe regulator.
Types 67CF, 67CFR, 67CFS, and 67CFSR
Filter Capabilities
Free Area: 12 times pipe areaMicron Rating: Cellulose Element: 40 micronsGlass Fiber Element: 5 micronsStainless Steel Element: 40 microns
Additional Technical Data
For more technical information, contactyour local Sales Ofce or log on to:
www.emersonprocess.com/regulators
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 14/104
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 15/104
67C Series Instrument Supply Regulators
15
AIR P RODUCTS
Table 3. Capacities
OUTLET PRESSURE
RANGE, SPRING PART
NUMBER AND COLOR,
PSIG (bar)
OUTLET
PRESSURE,
PSIG (bar)
INLET PRESSURE,
PSIG (bar)
CAPACITIES IN SCFH (Nm3 /h) OF AIR
Types 67C, 67CR, 67CS, and 67CSR Types 67CF, 67CFR, 67CFS, and 67CFSR
10% Droop 20% Droop 10% Droop 20% Droop
0 to 35 (0 to 2,4)
T14059T0012 (Silver)
T14113T0012
(Silver stripe)
15 (1,0)
50
75
100
150
250
400
(3,4)
(5,2)
(6,9)
(10,3)
(17,2)
(27,6)(2)
250
340
430
680
1300
390
(6,70)
(9,11)
(11,5)
(18,2)
(34,8)
(10,5)
430
610
800
1200
1900
1850
(11,5)
(16,3)
(21,4)
(32,2)
(50,9)
(50,0)
250
300
330
400
450
- -
(6,70)
(8,04)
(8,84)
(10,7)
(12,1)
- -
430
690
1000
1600
1800
- -
(11,5)
(18,5)
(26,8)
(42,9)
(48,2)
- -
20 (1,4)
5075
100
150
250
400
(3,4)(5,2)
(6,9)
(10,3)
(17,2)
(27,6)(2)
310420
620
960
1550
1200
(8,31)(11,3)
(16,6)
(25,7)
(41,5)
(32,2)
460700
940
1450
2150
2750
(12,3)(18,8)
(25,2)
(38,9)
(57,6)
(73,7)
350530
750
1400
2550
- -
(9,38) (14,2)
(20,1)
(37,5)
(68,3)
- -
500820
1100
1600
2700
- -
(13,4) (22,0)
(29,5)
(42,9)
(72,4)
- -
35 (2,4)
50
75
100
150
250
400
(3,4)
(5,2)
(6,9)
(10,3)
(17,2)
(27,6)(2)
390
590
770
1200
2200
2850
(10,4)
(15,8)
(20,6)
(32,2)
(58,9)
(76,4)
490
850
1150
1750
2700
3450
(13,1)
(22,8)
(30,8)
(46,9)
(72,4)
(92,5)
390
640
840
1450
2450
- -
(10,4)
(17,1)
(22,5)
(38,9)
(65,7)
- -
500
820
1100
1650
2700
- -
(13,4)
(22,0)
(29,5)
(44,2)
(72,4)
- -
0 to 60 (0 to 4,1)
T14058T0012
(Blue stripe)
T14114T0012 (Blue)
35 (2,4)
50
75
100
150
250
400
(3,4)
(5,2)
(6,9)
(10,3)
(17,2)
(27,6)(2)
310
440
560
780
1450
770
(8,31)
(11,8)
(15,0)
(20,9)
(38,9)
(20,6)
440
670
900
1350
2200
2500
(11,8)
(18,0)
(24,1)
(36,2)
(59,0)
(67,0)
330
500
700
1050
2000
- -
(8,84)
(13,4)
(18,8)
(28,1)
(53,6)
- -
470
730
1000
1550
2600
- -
(12,6)
(19,6)
(26,8)
(41,5)
(69,7)
- -
60 (4,1)
75100
150
250
400
(5,2)(6,9)
(10,3)
(17,2)
(27,6)(2)
520750
1100
2050
3200
(13,9)(20,1)
(29,5)
(54,9)
(85,8)
7201050
1700
2850
4300
(19,3)(28,1)
(45,6)
(76,4)
(115)
520770
1100
2450
- -
(13,9) (20,6)
(29,5)
(65,7)
- -
7201000
1600
2750
- -
(19,3) (26,8)
(42,9)
(73,7)
- -
0 to 125 (0 to 8,6)
T14060T0012
(Red stripe)
T14115T0012 (Red)
80 (5,5)
100
150
250
400
(6,9)
(10,3)
(17,2)
(27,6)(2)
500
750
1200
910
(13,4)
(20,1)
(32,2)
(24,4)
800
1200
2050
3700
(21,4)
(32,2)
(54,9)
(99,2)
530
780
1250
- -
(14,2)
(20,9)
(33,5)
- -
780
1200
2200
- -
(20,9)
(32,2)
(58,9)
- -
125 (8,6)
150
250
400
(10,3)
(17,2)
(27,6)(2)
900
1560
2200
(24,1)
(41,8)
(59,0)
1250
2450
4350
(33,5)
(65,7)
(117)
900
1650
- -
(24,1)
(44,2)
- -
1150
2450
- -
(30,8)
(65,7)
- -
0 to 150 (0 to 10,3)(1)
10C1730X012 (Black)
80 (5,5)250
400
(17,2)
(27,6)(2)
550
400
(14,7)
(10,7)
1200
1100
(32,2)
(29,5)
550
- -
(14,7)
- -
1200
- -
(32,2)
- -
135 (9,3)250
400
(17,2)
(27,6)(2)
970
840
(26,0)
(22,5)
1800
2350
(48,2)
(63,0)
1100
- -
(29,5)
- -
1800
- -
(48,2)
- -
150 (10,3)250
400
(17,2)
(27,6)
(2)
1100
940
(29,5)
(25,2)
1850
2500
(49,6)
(67,0)
1100
- -
(29,5)
- -
1850
- -
(49,6)
- - 1. Available for Types 67CS, 67CSR, 67CFS, and 67CFSR only.
2. Inlet pressures above 250 psig (17,2 bar) with a maximum of 400 psig (27,6 bar) only available on Types 67CS and 67CSR.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 16/104
67C Series Instrument Supply Regulators
16
AIR P RODUCTS
Table 4. Types 67C, 67CR, 67CS, and 67CSR Dimensions
TYPESSTANDARD DIMENSIONS
DIMENSION WITH
CLOSING CAPPANEL MOUNT OPTION WITH HANDWHEEL DIMENSIONS
A B A A C D
67C, 67CR 3.50 (89) 1.51 (38) 4.60 (117) 4.69 (119) 1.08 (27) 2.33 (59)
67CS, 67CSR 4.13 (105) 1.62 (41) 4.93 (125) 5.00 (127) 1.14 (29) 2.65 (67)
Figure 4. Types 67C, 67CR, 67CS, and 67CSR Dimensions
STANDARD DIMENSIONS
OUTLET CONNECTIONS1/4-INCH NPT
2.56(65)
0.50(13)
INLET CONNECTION1/4-INCH NPT
STANDARD DIMENSIONS FOR GAUGE OPTION
OPTIONAL GAUGE
SIDE OUTLET1/4-INCH NPT
AMAXIMUM
B
4.56
(116)
2.92(74)
1.46(37)
DIMENSIONS WITH CLOSING CAP
AND 1/4-INCH NPT SPRING CASE VENT
DIMENSIONS FOR PANEL MOUNT OPTION WITHHANDWHEEL AND 1/4-INCH NPT SPRING CASE VENT
1/4-INCH NPT VENT
INCHES
(mm)
INLET CONNECTION1/4-INCH NPT
OUTLET CONNECTIONS
1/4-INCH NPT
CLOSING CAP
0.72 (18,3)
SPRING CASEPANEL BOSS
OPTIONAL GAUGE
1.43(36)
A
SIDE OUTLET TAPPED
1/4-INCH NPT
PANEL0.12 TO 0.25
(3,0 to 6,4)
2.37(60)
MAXIMUM
A
MAXIMUM
D
C
4.56(116)
2.92
(74)
1.46(37)
2.56
(65)
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 17/104
67C Series Instrument Supply Regulators
17
AIR P RODUCTS
VENT POSITIONS DRAIN VALVE POSITIONS
INLETINLET OUTLET
OUTLET
G A U G E
G A U G E
VENT POSITION 2
VENT POSITION 3VENT POSITION 1(STANDARD)
VENT POSITION 4 DRAIN VALVEPOSITION 2
DRAIN VALVEPOSITION 1
(STANDARD)
DRAIN VALVE
POSITION 4
DRAIN VALVEPOSITION 3
B2699-DB2699-C
DIMENSIONS FOR GAUGE OPTION STANDARD DIMENSIONS
3.50
(89)
4.56
(116)
3.00
(76)1.48
(38)
3.50
(89)
SIDE OUTLET
1/4-INCH NPT
OPTIONAL GAUGE
0.62
(16)
2.56
(65)
2.25
(57)
2.87(73)
MOUNTING HOLES
FOR 5/16 (7,94)DIAMETER BOLTS
INLET CONNECTION
1/4-INCH NPT
0.69
(18)
OUTLETCONNECTIONS
1/4-INCH NPT
INCHES(mm)
B2699-A B2699-B
Figure 5. Types 67CF and 67CFR Dimensions
Figure 6. 67C Series Vent and Drain Valve Positions
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 18/104
67C Series Instrument Supply Regulators
18
AIR P RODUCTS
DIMENSIONS FOR PANEL MOUNT OPTION
WITH HANDWHEEL AND 1/4-INCH NPT SPRING CASE VENT
DIMENSIONS FOR CLOSING CAP OPTION
WITH 1/4-INCH NPT SPRING CASE VENT
0.69(18)
CLOSING CAP
OUTLET
CONNECTIONS1/4-INCH NPT
4.78
(121)
MAXIMUM
2.37(60)
MAXIMUMPANEL
0.12 TO 0.25
(3,0 to 6,4)
2.41(61)
MAXIMUM
1.14(29)
3.50
(89)
4.56
(116)
3.00
(76)
1.48
(38)
OPTIONAL GAUGE
SIDE OUTLET TAPPED
1/4-INCH NPT
0.72 (18,3)SPRING CASE
PANEL BOSS
1/4-INCH NPT VENT
INCHES
(mm)
2.56
(65)
1.43
(36)
4.69(119)
2.25
(57)
2.87
(73)
INLET CONNECTION1/4-INCH NPT
MOUNTING HOLES
FOR 5/16 (7,94)
DIAMETER BOLTS
B2700-A B2700-B
Figure 7. Types 67CF and 67CFR Dimensions
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 19/104
67C Series Instrument Supply Regulators
19
AIR P RODUCTS
Figure 8. Types 67CFS and 67CFSR Dimensions
STANDARD DIMENSIONS (INCLUDING CLOSING CAP) STANDARD DIMENSIONS (INCLUDING CLOSING CAP)
DIMENSIONS WITHOUT CLOSING CAP DIMENSIONS FOR PANEL MOUNT OPTION WITH HANDWHEEL
GE03199
GE03268
VENT 1/4-INCH NPT
4.56(116)
3.00(76)
1.48
(38)
4.93
(125)
1.14
(29)
4.00(102)
OPTIONAL
GAUGE
1/4-INCH NPT
INLET CONNECTIONINCHES
(mm)
1.43(36)
2.56(65) 0.62
(16)
0.69
(18)
1/4-INCH NPT INLETCONNECTION
MOUNTING HOLES FOR
5/16 (7,94)
DIAMETER BOLTS
CLOSING
CAP
1/4-INCH NPTOUTLET CONNECTIONS
2.25(57)
2.87(73)
4.13(105)
MAXIMUM
2.37
(60)MAXIMUM
5.00(127)
MAXIMUMPANEL
0.12 TO 0.25
(3,0 to 6,4)2.65
(67)
INCHES(mm)
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 20/104
67C Series Instrument Supply Regulators
20
AIR P RODUCTS
Ordering Guide
- continued -
Type (Select One)
67C (aluminum without internal relief)***
67CR (aluminum with internal relief)***
67CS (stainless steel without internal relief)***
67CSR (stainless steel with internal relief)***
67CF (aluminum with lter, without internal relief)***
67CFR (aluminum with lter, internal relief)***
67CFS (stainless steel with lter, without internal relief)***
67CFSR (stainless steel with lter, internal relief)***
Quantity (Specify)
Spring Case Style (Select One)
Drilled hole vent (Types 67C, 67CR, 67CF, and
67CFR) (standard)***
1/4-inch NPT vent (Types 67CS, 67CSR, 67CFS, and
67CFSR) (standard)***
Single hole panel mount***
Adjusting Screw (Select One)
Square head (Types 67C, 67CR, 67CF, and 67CFR) (standard)***
Square head with closing cap (Types 67CS, 67CSR, 67CFS, and
67CFSR) (standard)***
Handwheel***
Outlet Pressure Range (Select One)
0 to 20 psig (0 to 1,4 bar)***
0 to 35 psig (0 to 2,4 bar)***
0 to 60 psig (0 to 4,1 bar)***
0 to 125 psig (0 to 8,6 bar)***
0 to 150 psig (0 to 10,3 bar) (Types 67CS, 67CSR, 67CFS, and
67CFSR only)***
Diaphragm, O-Rings, and Valve Plug (Select One)
Nitrile (NBR) (standard)***
Fluoroelastomer (FKM)**
Silicone (VMQ) diaphragm, O-rings, and Nitrile (NBR)
valve plug*
Filter Material (Select One)
Cellulose (40 microns) (Types 67CF and
67CFR) (standard)***
Glass (5 microns)*** Stainless steel (40 microns) (Types 67CFS and
67CFSR) (standard)***
Drain Valve (Select One)
Brass (Types 67CF and 67CFR) (standard)***
Stainless steel (Types 67CFS and 67CFSR) (standard)***
Drain Valve Location (Select One)
Position 1 - Aligned with inlet (standard)***
Position 2
Position 3
Position 4
Spring Case Vent Location (Select One) Position 1 - Aligned with inlet (standard)***
Position 2
Position 3
Position 4
Fixed Bleed for Type 67CR, 67CSR, 67CFR,
or 67CFSR (Optional)
Yes**
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 21/104
67C Series Instrument Supply Regulators
21
AIR P RODUCTS
NACE MR0175 Construction (Optional)(1)
Yes (not available with gauge)**
1. Product complies with the material requirements of NACE
MR0175. Environmental limits may apply.
NACE MR0103 Construction (Optional)
Yes (not available with gauge)**
Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match this order.
Smart Bleed™ Internal Check Valve Airset
(Optional - Type 67CFR only)
Yes**
Second Outlet (Select One)
Open (Types 67C, 67CR, 67CF, and 67CFR) (standard)***
Plugged with pipe plug (Types 67CS, 67CSR, 67CFS, and
67CFSR) (standard)***
Tire Valve***
Pressure Gauge (see below)
Triple Scale Pressure Gauge (Optional)
Brass Gauge or Stainless steel Gauge
0 to 30 psig/0 to 0.2 MPa/0 to 2,1 bar***
0 to 60 psig/0 to 0.4 MPa/0 to 4,1 bar***
0 to 160 psig/0 to 1.1 MPa/0 to 11 bar***
Ordering Guide (continued)
Specication Worksheet
Application (Please designate units):
Specic Use
Line Size
Gas Type and Specic Gravity
Gas TemperatureDoes the Application Require Overpressure Protection?
No Yes, if so, which is preferred:
Relief Valve Monitor Regulator Shutoff Device
Is overpressure protection equipment selection assistance
desired?
Pressure (Please designate units):
Maximum Inlet Pressure (P1max
)
Minimum Inlet Pressure (P1min
)
Downstream Pressure Setting(s) (P2)
Maximum Flow (Qmax
)
Performance Required:
Accuracy Requirements?
Need for Extremely Fast Response?Other Requirements:
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your local
Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your local
Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 22/104
95H Series Pressure Reducing Regulators
22
AIR P RODUCTS
Introduction
The 95H Series regulators are compact,
large-capacity, direct-operated, pressure
reducing regulators. The units are
available in 1/4 and 1/2 through 2-inch
(DN 15 through 50) body sizes and
are offered with several different end
connection styles. They are designed
to handle inlet pressures up to 600 psig
(41,4 bar) and temperatures up to
650°F (343°C).
Body Sizes and End Connection Styles
See Table 2
Flow and Sizing Coefficients
See Table 7
Pressure Registration
Internal
• Versatility
• Tight Shutoff with
Elastomer Seats
• Easy Maintenance
• Differential Pressure Capability
• Compact, Rugged Construction
Figure 1. Type 95H, 95HP, or 95HT Pressure
Reducing Regulator
W1888-A
Table 1. Available Congurations
TYPE CONFIGURATION
95H High-pressure regulator for 5 to 150 psig (0,3 to 10,3 bar) outlet pressure
95HDHigh-pressure differential regulator for 5 to 150 psig (0,3 to 10,3 bar)
differential pressure with handwheel and packing box
95HPHigh-pressure regulator for 15 to 400 psig (1,0 to 27,6 bar)
outlet pressures (soft seated)
95HTHigh-pressure/high temperature regulator with metal seat for 15 to 300 psig
(1,0 to 20,7 bar) outlet pressures and up to 650°F (343°C)
Table 2. Body Sizes and End Connection Styles
BODY SIZE,
INCHES (DN)
BODY MATERIAL
Cast Iron BodySteel, Stainless Steel
Hastelloy® C, or Monel®
1/4 NPT NPT
1/2, 3/4, 1, 1-1/2, 2
(15, 20, 25, 40, 50)NPT
NPT, CL150 RF, CL300 RF,
SWE, or PN 16/25/40
Note: 1/4-inch body size is only available with threaded NPT connections. DN values
are provided only to body sizes with anged end connections.
Table 3. Construction Materials
BODY SPRING CASE REGULATOR SPRING VALVE SPRING TRIM MATERIALS
Cast iron, WCC Steel,
CF8M Stainless steel, Hastelloy® C,
or Monel®
Cast iron, WCC Steel,
or CF8M Stainless steel
Zinc Plated Steel (standard),
Inconel®, 302 Stainless steel,
or 17-7PH
302 Stainless steel
or Inconel® See Table 4
Features
Temperature Capabilities
See Tables 8 and 9
Maximum Inlet Pressure
600 psig (41,4 bar)
See Table 5
Maximum Outlet (Casing) Pressure
See Table 5
Outlet Pressure Ranges
5 to 400 psig (0,3 to 27,6 bar)in several ranges. See Table 6
Additional Technical Data
For more technical information, contact
your local Sales Ofce or log on to:
www.emersonprocess.com/regulators
W1894_95HD
Figure 2. Type 95HD Pressure Reducing Regulator
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 23/104
95H Series Pressure Reducing Regulators
23
AIR P RODUCTS
Figure 3. 95H Series Operational Schematics
INLET PRESSURE
OUTLET PRESSURE
ATMOSPHERIC PRESSURE
INLET PRESSURE
OUTLET PRESSURE
LOADING PRESSURE
M1006
TYPE 95H, 95HP, OR 95HT TYPE 95HD
A6616
Regulator Tip
Use control lines of equal or greater size than the control tap on the regulator. If a long control line is required, make it
bigger. A rule of thumb is to use the next nominal pipe size for every 20 feet (6,1 meters) of control line. Small control lines
cause a delayed response of the regulator, leading to increased chance of instability. 3/8-inch (9,53 mm) OD tubing is theminimum recommended control line size.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 24/104
95H Series Pressure Reducing Regulators
24
AIR P RODUCTS
Table 5. Maximum Cold Working Pressures of Body Sizes and Materials(1)(2)
TYPES BODY SIZESBODY AND SPRING
CASE MATERIALS
MAXIMUM INLET PRESSURE,
PSIG (bar)
MAXIMUM OUTLET PRESSURE,
PSIG (bar)
95H and 95HD All sizes
Cast iron
Steel
Stainless steel
250 (17,2)
300 (20,7)
300 (20,7)
250 (17,2)
300 (20,7)
300 (20,7)
95HP All sizesSteel
Stainless steel
600 (41,4)
600 (41,4)
600 (41,4)
550 (37,9)
95HT
1/4 to 1-inch (DN 15 to 25)Steel
Stainless steel
600 (41,4)
600 (41,4)
600 (41,4)
550 (37,9)
1-1/2, 2-inch (DN 40, 50) SteelStainless steel
600 (41,4)600 (41,4)
450 (31,0)450 (31,0)
1. The pressure limits in this Application Guide, and any applicable standard or code limitation for this regulator should not be exceeded.
2. Temperature and/or the body end connection may decrease these maximum pressures.
Table 4. Trim Materials
ELASTOMER SEAT
Part Name Standard Optional
Diaphragm Neoprene (CR) or Fluoroelastomer (FKM)
302 Stainless steel, Ethylenepropylene (EPDM),
Monel® or Hastelloy® C; olytetrauoroethylene �olytetrauoroethylene �(PTFE)
protector available with elastomeric diaphragm
Disk Neoprene (CR) or Fluoroelastomer (FKM)
PTFE, Nitrile (NBR),
Ethylenepropylene (EPDM),
eruoroelastomer �KM
Disk Holder Brass or 416 Stainless steel 316 Stainless steel, Monel, Hastelloy C
Valve Plug Guide Brass or 416 Stainless steel 316 Stainless steel, Monel, Hastelloy C
Valve Plug Brass or 416 Stainless steel 316 Stainless steel, Monel, Hastelloy COrice Brass or 416 Stainless steel 316 Stainless steel, Monel, Hastelloy C
Stem Assembly Brass or 416 Stainless steel 316 Stainless steel, Monel, Hastelloy C
METAL SEAT
Diaphragm 302 Stainless steel Monel, Hastelloy C
Disk 416 Stainless steel 316 Stainless steel, Monel, Hastelloy C
Disk Holder Brass or 416 Stainless steel 316 Stainless steel, Monel, Hastelloy C
Valve Plug 416 Stainless steel 316 Stainless steel, Monel, Hastelloy C, Brass
Valve Plug Guide Brass or 416 Stainless steel 316 Stainless steel, Monel, Hastelloy C, Brass
Orice Brass or 416 Stainless steel 316 Stainless steel, Monel, Hastelloy C
Stem Assembly Brass or 416 Stainless steel 316 Stainless steel, Monel, Hastelloy C
Gaskets Composition Graphite
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 25/104
95H Series Pressure Reducing Regulators
25
AIR P RODUCTS
Table 6. Outlet Pressure Ranges
TYPESBODY SIZE,
INCHES (DN)
OUTLET PRESSURE
RANGES(1), PSIG (bar)
SPRING WIRE DIAMETER,
INCHES (mm)
SPRING PART NUMBER
AND COLOR
95H and 95HD
1/4
15 to 30
25 to 75
70 to 150
(1,0 to 2,1)
(1,7 to 5,2)
(4,8 to 10,3)
0.148 (3,76)
0.172 (4,37)
0.207 (5,26)
1E392527022
1E392627012
1E392727142
Yellow
Green
Red
1/2 (15)
15 to 30
25 to 75
70 to 150
(1,0 to 2,1)
(1,7 to 5,2)
(4,8 to 10,3)
0.207 (5,26)
0.234 (5,94)
0.281 (7,14)
1E395627022
1D745527142
1E395727192
Yellow
Green
Red
3/4
1
(20)
(25)
15 to 30
25 to 75
70 to 150
(1,0 to 2,1)
(1,7 to 5,2)
(4,8 to 10,3)
0.306 (7,77)
0.343 (8,71)
0.406 (10,3)
1E398927022
1E399027142
1E399127162
Yellow
Green
Red
1-1/22
(40)(50)
5 to 80
60 to 120100 to 140
120 to 150
(0,3 to 5,5)
(4,1 to 8,3)(6,9 to 9,7)
(8,3 to 10,3)
0.531 (13,5)
0.562 (14,3)0.593 (15,1)
0.656 (16,7)
1E795327082
1E7954270821E793327082
1P788827082
Light blue
Light grayYellow
Black
95HP
1/415 to 100
80 to 400
(1,0 to 6,9)
(5,5 to 27,6)
0.192 (4,88)
0.282 (7,16)
14B9941X012
14B9940X012
Unpainted
Unpainted
1/2 (15)15 to 100
80 to 400
(1,0 to 6,9)
(5,5 to 27,6)
0.282 (7,16)
0.375 (9,53)
14B9943X012
14B9942X012
Unpainted
Unpainted
3/4
1
(20)
(25)
15 to 100
80 to 400
(1,0 to 6,9)
(5,5 to 27,6)
0.437 (11,1)
0.562 (14,3)
14B9944X012
14B9945X012
Unpainted
Unpainted
1-1/2
2
(40)
(50)
15 to 100
60 to 300
(1,0 to 6,9)
(4,1 to 20,7)
0.625 (15,9)
0.812 (20,6)
17B1704X012
17B1705X012
Unpainted
Unpainted
95HT
1/415 to 100
80 to 300
(1,0 to 6,9)
(5,5 to 20,7)
0.192 (4,88)
0.282 (7,16)
14B9941X012
14B9940X012
Unpainted
Unpainted
1/2 (15)15 to 100
80 to 300
(1,0 to 6,9)
(5,5 to 20,7)
0.282 (7,16)
0.375 (9,53)
14B9943X012
14B9942X012
Unpainted
Unpainted
3/4
1
(20)
(25)
15 to 100
80 to 300
(1,0 to 6,9)
(5,5 to 20,7)
0.437 (11,1)
0.562 (14,3)
14B9944X012
14B9945X012
Unpainted
Unpainted1-1/2
2
(40)
(50)
15 to 100
60 to 260
(1,0 to 6,9)
(4,1 to 17,9)
0.625 (15,9)
0.812 (20,6)
17B1704X012
17B1705X012
Unpainted
Unpainted
1. For Type 95HD, the pressure ranges indicate the differential pressure that can be obtained with the indicated spring. The differential pressure (spring setting) is added to the spring
case loading pressure to determine the actual outlet pressure.
Table 7. Flow and Sizing Coefcients
BODY SIZE,
INCHES (DN)
WIDE-OPEN COEFFICIENTS (FOR RELIEF SIZING)C
1K
m
IEC SIZING COEFFICIENTS
Cv
Cg
Cs
XT
FD
FL
1/4 0.8 28 1.40 35 0.83 0.775 0.58 0.91
1/2 (15) 1.9 67 3.35 35 0.71 0.775 0.58 0.84
3/4, 1 (20, 25) 4.4 156 7.80 35 0.67 0.775 0.44 0.82
1-1/2, 2 (40, 50) 12.5 475 23.75 38 0.83 0.913 0.37 0.91
Table 9. Maximum Temperature Ranges of Diaphragmand Seat Materials(1)(2)
MATERIAL TEMPERATURE RANGES
Nitrile (NBR) -40° to 180°F (-40° to 82°C)
Neoprene (CR) -40° to 180°F (-40° to 82°C)
Fluoroelastomer (FKM) 0° to 300°F (-18° to 149°C)
eruoroelastomer �KM 0° to 450°F (-18° to 232°C)
Ethylenepropylene (EPDM) -40° to 275°F ( -40° to 135°C)
PTFE -40° to 400°F (-40° to 204°C)
Stainless steel -40° to 650°F (-40° to 343°C)
1. The temperature limits in this Application Guide, and any
applicable standard or code limitation for this regulator should not be exceeded.
2. Pressures and/or the body end connection may decrease these maximum temperatures.
Table 8. Maximum Temperature Ranges of
Body Materials(1)(2)
TYPESBODY AND SPRING
CASE MATERIALSTEMPERATURE RANGES
95H and 95HD
Cast iron -40° to 406°F (-40° to 208°C)
Steel -20° to 450°F (-29° to 232°C)
Stainless steel -40° to 450°F ( -40° to 232°C)
95HPSteel -20° to 450°F (-29° to 232°C)
Stainless steel -40° to 450°F (-40° to 232°C)
95HT
Steel -20° to 650°F (-29° to 343°C)
Stainless steel -40° to 550°F ( -40° to 288°C)
1. The temperature limits in this Application Guide, and any applicable
standard or code limitation for this regulator should not be exceeded.
2. Pressures and/or the body end connection may decrease these maximum temperatures.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 26/104
95H Series Pressure Reducing Regulators
26
AIR P RODUCTS
Table 10. Types 95H and 95HD Capacities for 1/4 and 1/2 through 1-Inch (DN 15 through 25)
Body Sizes with Elastomer Diaphragm(1)
OUTLET
PRESSURE
RANGE,
PSIG (bar)
OUTLET
PRESSURE
SETTING,
PSIG (bar)
INLET
PRESSURE,
PSIG (bar)
CAPACITIES IN SCFH (Nm3 /h) OF AIR
1/4-Inch Body 1/2-Inch (DN 15) Body 3/4-Inch (DN 20) Body 1-Inch (DN 25) Body
10% Offset 20% Offset 10% Offset 20% Offset 10% Offset 20% Offset 10% Offset 20% Offset
15 to 30
(1,0 to 2,1)
15 (1,0)
30
50
100
200
300
(2,1)
(3,4)
(6,9)
(13,8)
(20,7)
680
840
1100
1900
2000
(18,2)
(22,5)
(29,5)
(50,9)
(53,6)
1000
1200
1600
2300
2700
(26,8)
(32,2)
(42,9)
(61,6)
(72,4)
900
900
1400
2200
2700
(24,1)
(24,1)
(37,5)
(59,0)
(72,4)
1400
1500
2100
2800
3300
(37,5)
(40,2)
(56,3)
(75,0)
(88,4)
2200
2900
4000
6000
7400
(59,0)
(77,7)
(107)
(161)
(198)
3100
4300
6000
8000
9600
(83,1)
(115)
(161)
(214)
(257)
2200
3400
5400
8700
10 000
(59,0)
(91,1)
(145)
(233)
(268)
3300
5400
8000
11 700
14 000
(88,4)
(145)
(214)
(314)
(375)
30 (2,1)
50
100
200300
(3,4)
(6,9)
(13,8)(20,7)
780
1600
28003200
(20,9)
(42,9)
(75,0)(85,8)
960
2500
42004600
(25,7)
(67,0)
(113)(123)
1300
2000
31004000
(34,8)
(53,6)
(83,1)(107)
2100
3000
43004900
(56,3)
(80,4)
(115)(131)
4000
6300
920010 000
(107)
(169)
(247)(268)
6000
9800
12 00014 000
(161)
(263)
(322)(375)
4000
7400
12 00015 000
(107)
(198)
(322)(402)
6600
11 000
18 00021 000
(177)
(295)
(482)(563)
25 to 75
(1,7 to 5,2)
50 (3,4)
75
100
200
300
(5,2)
(6,9)
(13,8)
(20,7)
1200
1400
2600
4000
(32,2)
(37,5)
(69,7)
(107)
1600
2300
4500
6200
(42,9)
(61,6)
(121)
(166)
1400
2100
3100
3500
(37,5)
(56,3)
(83,1)
(93,8)
2300
2900
4600
5100
(61,6)
(77,7)
(123)
(137)
6000
7400
11 000
12 000
(161)
(198)
(295)
(322)
8600
11 000
17 000
18 000
(230)
(295)
(456)
(482)
6300
7000
15 000
19 000
(169)
(188)
(402)
(509)
9600
13 000
24 000
27 000
(257)
(348)
(643)
(724)
75 (5,2)
100
200
300
(6,9)
(13,8)
(20,7)
1600
3700
5100
(42,9)
(99,2)
(137)
2400
5400
7600
(64,3)
(145)
(204)
2300
3700
4700
(61,6)
(99,2)
(126)
3700
5500
7100
(99,2)
(147)
(190)
8000
14 000
16 000
(214)
(375)
(429)
12 000
21 000
25 000
(322)
(563)
(670)
8700
17 000
23 000
(233)
(456)
(616)
13 000
28 000
35 000
(348)
(750)
(938)
70 to 150
(4,8 to 10,3)
100 (6,9)
125
150
200
300
(8,6)
(10,3)
(13,8)
(20,7)
2000
2000
2800
4000
(53,6)
(53,6)
(75,0)
(107)
2800
3500
4600
6900
(75,0)
(93,8)
(123)
(185)
3400
4000
5200
8000
(91,1)
(107)
(139)
(214)
5800
6800
8200
11 000
(155)
(182)
(220)
(295)
8500
12 000
15 000
19 000
(228)
(322)
(402)
(509)
14 000
18 000
23 000
29 000
(375)
(482)
(616)
(777)
11 000
14 000
16 000
26 000
(295)
(375)
(429)
(697)
16 000
20 000
27 000
38 000
(429)
(536)
(724)
(1018)
150 (10,3)
175
200
300
(12,1)
(13,8)
(20,7)
2500
3000
5400
(67,0)
(80,4)
(145)
3800
4300
7600
(102)
(115)
(204)
5600
6500
8700
(150)
(174)
(233)
9500
11 000
15 000
(255)
(295)
(402)
14 000
16 000
23 000
(375)
(429)
(616)
20 000
24 000
37 000
(536)
(643)
(992)
16 000
20 000
31 000
(429)
(536)
(831)
22 000
26 000
44 000
(590)
(697)
(1179)
1. To obtain capacities for regulators using metal diaphragms, multiply the table values by 0.6.
Table 11. Types 95H and 95HD Capacities with 1-1/2 and 2-Inch (DN 40 and 50)(1)
OUTLET PRESSURE
RANGE, PSIG (bar)
OUTLET PRESSURE
SETTING, PSIG (bar)
INLET PRESSURE,
PSIG (bar)
CAPACITIES IN SCFH (Nm3 /h) OF AIR
1-1/2-Inch (DN 40) Body 2-Inch (DN 50) Body
10% Offset 20% Offset 10% Offset 20% Offset
5 to 80
(0,3 to 5,5)
5 (0,3)
10
50
100
200
300
(0,69)
(3,4)
(6,9)
(13,8)
(20,7)
950
3500
6500
12 000
18 000
(25,5)
(93,8)
(174)
(322)
(482)
1000
4000
8000
14 000
20 000
(26,8)
(107)
(214)
(375)
(536)
1000
4000
9000
16 000
19 000
(26,8)
(107)
(241)
(429)
(509)
1100
5500
12 000
19 000
21 000
(29,5)
(147)
(322)
(509)
(563)
30 (2,1)
40
50
100200
300
(2,8)
(3,4)
(6,9)(13,8)
(20,7)
3400
4500
800020 000
29 000
(91,1)
(121)
(214)(536)
(777)
6100
9000
15 00031 000
38 000
(163)
(241)
(402)(831)
(1018)
4500
8000
24 00048 000
53 000
(121)
(214)
(643)(1286)
(1420)
6200
10 000
30 00055 000
59 000
(166)
(268)
(804)(1474)
(1581)
50 (3,4)
75
100
200
300
(5,2)
(6,9)
(13,8)
(20,7)
9000
10 000
21 000
39 000
(241)
(268)
(563)
(1045)
14 000
19 000
36 000
51 000
(375)
(509)
(965)
(1367)
12 000
20 000
43 000
65 000
(322)
(536)
(1152)
(1742)
20 000
40 000
75 000
84 000
(536)
(1072)
(2010)
(2251)
75 (5,2)
100
200
300
(6,9)
(13,8)
(20,7)
14 000
23 000
43 000
(375)
(616)
(1152)
22 000
49 000
65 000
(590)
(1313)
(1742)
15 000
50 000
90 000
(402)
(1340)
(2412)
28 000
90 000
120 000
(750)
(2412)
(3216)
60 to 120
(4,1 to 8,3)100 (6,9)
125
225
300
(8,6)
(15,5)
(20,7)
11 000
28 000
40 000
(295)
(750)
(1072)
29 000
62 000
88 000
(777)
(1662)
(2358)
12 000
28 000
55 000
(322)
(750)
(1474)
30 000
62 000
80 000
(804)
(1662)
(2144)
100 to 140
(6,9 to 9,7)125 (8,6)
150
200
300
(10,3)
(13,8)
(20,7)
21 000
28 000
42 000
(563)
(750)
(1126)
40 000
54 000
85 000
(1072)
(1447)
(2278)
22 000
39 000
86 000
(590)
(1045)
(2305)
40 000
70 000
150 000
(1072)
(1876)
(4020)
120 to 150
(8,3 to 10,3) 150 (10,3)
175
200300
(12,1)
(13,8)(20,7)
19 000
23 00045 000
(509)
(616)(1206)
32 000
44 00090 000
(858)
(1179)(2412)
20 000
24 00086 000
(536)
(643)(2305)
33 000
45 000140 000
(884)
(1206)(3752)
1. With either elastomer or stainless steel diaphragm.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 27/104
95H Series Pressure Reducing Regulators
27
AIR P RODUCTS
Table 12. Type 95HP Capacities for 1/4 and 1/2 through 1-Inch (DN 15 through 25)
Body Sizes with Elastomer Diaphragms
OUTLET
PRESSURE
RANGE,
PSIG (bar)
OUTLET
PRESSURE
SETTING,
PSIG (bar)
INLET
PRESSURE,
PSIG (bar)
CAPACITIES IN SCFH (Nm³/h) OF AIR
1/4-Inch Body 1/2-Inch (DN 15) Body 3/4-Inch (DN 20) Body 1-Inch (DN 25) Body
10% Offset 20% Offset 10% Offset 20% Offset 10% Offset 20% Offset 10% Offset 20% Offset
15 to 100
(1,0 to 6,9)
15 (1,0)
30
50
100
(2,1)
(3,4)
(6,9)
300
380
800
(8,04)
(10,2)
(21,4)
550
600
1200
(14,7)
(16,1)
(32,2)
600
700
1100
(16,1)
(18,8)
(29,5)
850
1200
1700
(22,8)
(32,2)
(45,6)
1300
1500
3100
(34,8)
(40,2)
(83,1)
1800
2400
4300
(48,2)
(64,3)
(115)
1200
1900
3000
(32,2)
(50,9)
(80,4)
1600
2700
4700
(42,9)
(72,4)
(126)
200
300
400
600
(13,8)
(20,7)
(27,6)
(41,4)
1200
1700
1800
2100
(32,2)
(45,6)
(48,2)
(56,3)
1700
2300
2300
2600
(45,6)
(61,6)
(61,6)
(69,7)
2100
2700
3300
4500
(56,3)
(72,4)
(88,4)
(121)
2800
3300
3800
4800
(75,0)
(88,4)
(102)
(129)
4500
6500
8200
12 000
(121)
(174)
(220)
(322)
6200
8000
9500
13 000
(166)
(214)
(255)
(348)
5500
7500
9000
12 000
(147)
(201)
(241)
(322)
7500
10 000
12 000
16 000
(201)
(268)
(322)
(429)
50 (3,4)
100
200
300
400
600
(6,9)
(13,8)
(20,7)
(27,6)
(41,4)
1400
3000
3500
4000
5000
(37,5)
(80,4)
(93,8)
(107)
(134)
2500
4600
5500
5700
5700
(67,0)
(123)
(147)
(153)
(153)
2300
3500
4400
5200
6000
(61,6)
(93,8)
(118)
(139)
(161)
3800
5700
6400
7000
8200
(102)
(153)
(172)
(188)
(220)
5000
8000
11 000
14 000
19 000
(134)
(214)
(295)
(375)
(509)
8500
13 000
16 000
19 000
24 000
(228)
(348)
(429)
(509)
(643)
5400
10 000
15 000
16 000
20 000
(145)
(268)
(402)
(429)
(536)
9300
16 000
23 000
26 000
33 000
(249)
(429)
(616)
(697)
(884)
100 (6,9)
125
200
300
400
600
(8,6)
(13,8)
(20,7)
(27,6)
(41,4)
2000
4500
6100
7000
7800
(53,6)
(121)
(163)
(188)
(209)
3200
5700
8300
10 000
12 000
(85,8)
(153)
(222)
(268)
(322)
4100
5700
7200
7800
9000
(110)
(153)
(193)
(209)
(241)
6700
9300
11 000
12 000
14 000
(180)
(249)
(295)
(322)
(375)
8500
13 000
18 000
22 000
29 000
(228)
(348)
(482)
(590)
(777)
14 000
22 000
29 000
32 000
39 000
(375)
(590)
(777)
(858)
(1045)
8800
16 000
21 000
28 000
43 000
(236)
(429)
(563)
(750)
(1152)
15 000
26 000
35 000
45 000
66 000
(402)
(697)
(938)
(1206)
(1769)
80 to 300
(5,5 to 20,7)
125 (8,6)
150
200
300
400
600
(10,3)
(13,8)
(20,7)
(27,6)
(41,4)
2100
2800
3700
5200
7000
(56,3)
(75,0)
(99,2)
(139)
(188)
2800
4000
5700
7500
11 000
(75,0)
(107)
(153)
(201)
(295)
3000
4000
5200
6500
9300
(80,4)
(107)
(139)
(174)
(249)
5200
6500
8200
10 000
14 000
(139)
(174)
(220)
(268)
(375)
7000
9500
13 000
16 000
20 000
(188)
(255)
(348)
(429)
(536)
11 000
15 000
20 000
25 000
34 000
(295)
(402)
(536)
(670)
(911)
7800
8500
12 000
17 000
26 000
(209)
(228)
(322)
(456)
(697)
13 000
15 000
23 000
29 000
43 600
(348)
(402)
(616)
(777)
(1168)
200 (13,8)
225
300
400
600
(15,5)
(20,7)
(27,6)
(41,4)
3200
4200
5700
7200
(85,8)
(113)
(153)
(193)
4500
6600
8500
13 000
(121)
(177)
(228)
(348)
5500
6500
8800
11 000
(147)
(174)
(236)
(295)
9300
11 000
14 000
19 000
(249)
(295)
(375)
(509)
11 000
17 000
21 000
30 000
(295)
(456)
(563)
(804)
20 000
28 000
35 000
50 000
(536)
(750)
(938)
(1340)
12 000
18 000
22 000
30 000
(322)
(482)
(590)
(804)
21 000
31 000
40 000
59 000
(563)
(831)
(1072)
(1581)
300 (20,7)
350
400
600
(24,1)
(27,6)
(41,4)
5200
5600
7200
(139)
(150)
(193)
7700
8800
13 000
(206)
(236)
(348)
9000
9500
12 000
(241)
(255)
(322)
16 000
17 000
21 000
(429)
(456)
(563)
21 000
24 000
36 000
(563)
(643)
(965)
37 000
41 000
59 000
(992)
(1099)
(1581)
22 000
26 000
44 000
(590)
(697)
(1179)
38 000
47 000
81 000
(1018)
(1260)
(2171)
80 to 400
(5,5 to 27,6)400 (27,6)
500
600
(34,5)
(41,4)
7000
7200
(188)
(193)
13 000
14 000
(348)
(375)
11 000
12 000
(295)
(322)
20 000
21 000
(536)
(563)
35 000
40 000
(938)
(1072)
60 000
65 000
(1608)
(1742)
42 000
50 000
(1126)
(1340)
80 000
85 000
(2144)
(2278)
Table 13. Type 95HT Capacities for 1/4 and 1/2 through 1-Inch (DN 15 through 25)
Body Sizes with Metal Diaphragms
OUTLET
PRESSURE
RANGE,
PSIG (bar)
OUTLET
PRESSURE
SETTING,
PSIG (bar)
INLET
PRESSURE,
PSIG (bar)
CAPACITIES IN SCFH (Nm³/h) OF AIR
1/4-Inch Body 1/2-Inch (DN 15) Body 3/4-Inch (DN 20) Body 1-Inch (DN 25) Body
10% Offset 20% Offset 10% Offset 20% Offset 10% Offset 20% Offset 10% Offset 20% Offset
15 to 100
(1,0 to 6,9)
15 (1,0)
30
50
100
(2,1)
(3,4)
(6,9)
180
230
480
(4,82)
(6,16)
(12,9)
330
360
720
(8,84)
(9,65)
(19,3)
360
420
660
(9,65)
(11,3)
(17,7)
510
720
1000
(13,7)
(19,3)
(26,8)
780
900
1900
(20,9)
(24,1)
(50,9)
1100
1400
2600
(29,5)
(37,5)
(69,7)
720
1100
1800
(19,3)
(29,5)
(48,2)
960
1600
2800
(25,7)
(42,9)
(75,0)
200
300
400
600
(13,8)
(20,7)
(27,6)
(41,4)
720
1000
1100
1300
(19,3)
(26,8)
(29,5)
(34,8)
1000
1400
1400
1600
(26,8)
(37,5)
(37,5)
(42,9)
1300
1600
2000
2700
(34,8)
(42,9)
(53,6)
(72,4)
1700
2000
2300
2900
(45,6)
(53,6)
(61,6)
(77,7)
2700
3900
4900
7200
(72,4)
(105)
(131)
(193)
3700
4800
5700
7800
(99,2)
(129)
(153)
(209)
3300
4500
5400
7200
(88,4)
(121)
(145)
(193)
4500
6000
7200
9600
(121)
(161)
(193)
(257)
50 (3,4)
100
200
300
400
600
(6,9)
(13,8)
(20,7)
(27,6)
(41,4)
840
1800
2100
2400
3000
(22,5)
(48,2)
(56,3)
(64,3)
(80,4)
1500
2800
3300
3400
3400
(40,2)
(75,0)
(88,4)
(91,1)
(91,1)
1400
2100
2600
3100
3600
(37,5)
(56,3)
(69,7)
(83,1)
(96,5)
2300
3400
3800
4200
4900
(61,6)
(91,1)
(102)
(113)
(131)
3000
4800
6600
8400
11 400
(80,4)
(129)
(177)
(225)
(306)
5100
7800
9600
11 400
14 400
(137)
(209)
(257)
(306)
(386)
3200
6000
9000
9600
12 000
(85,8)
(161)
(241)
(257)
(322)
5600
9600
13 800
15 600
19 800
(150)
(257)
(370)
(418)
(531)
100 (6,9)
125
200
300
400
600
(8,6)
(13,8)
(20,7)
(27,6)
(41,4)
1200
2700
3700
4200
4700
(32,2)
(72,4)
(99,2)
(113)
(126)
1900
3400
5000
6000
7200
(50,9)
(91,1)
(134)
(161)
(193)
2500
3400
4300
4700
5400
(67,0)
(91,1)
(115)
(126)
(145)
4000
5600
6600
7200
8400
(107)
(150)
(177)
(193)
(225)
5100
7800
10 800
13 200
17 400
(137)
(209)
(289)
(354)
(466)
8400
13 200
17 400
19 200
23 400
(225)
(354)
(466)
(515)
(627)
5300
9600
12 600
16 800
25 800
(142)
(257)
(338)
(450)
(691)
9000
15 600
21 000
27 000
39 600
(241)
(418)
(563)
(724)
(1061)
- continued -
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 28/104
95H Series Pressure Reducing Regulators
28
AIR P RODUCTS
Table 13. Type 95HT Capacities for 1/4 and 1/2 through 1-Inch (DN 15 through 25)Body Sizes with Metal Diaphragms (continued)
OUTLET
PRESSURE
RANGE,
PSIG (bar)
OUTLET
PRESSURE
SETTING,
PSIG (bar)
INLET
PRESSURE,
PSIG (bar)
CAPACITIES IN SCFH (Nm³/h) OF AIR
1/4-Inch Body 1/2-Inch (DN 15) Body 3/4-Inch (DN 20) Body 1-Inch (DN 25) Body
10% Offset 20% Offset 10% Offset 20% Offset 10% Offset 20% Offset 10% Offset 20% Offset
80 to 300
(5,5 to 20,7)
125 (8,6)
150
200
300
400
600
(10,3)
(13,8)
(20,7)
(27,6)
(41,4)
1300
1700
2200
3100
4200
(34,8)
(45,6)
(59,0)
(83,1)
(113)
1700
2400
3400
4500
6600
(45,6)
(64,3)
(91,1)
(121)
(177)
1800
2400
3100
3900
5600
(48,2)
(64,3)
(83,1)
(105)
(150)
3100
3900
4900
6000
8400
(83,1)
(105)
(131)
(161)
(225)
4200
5700
7800
9600
12 000
(113)
(153)
(209)
(257)
(322)
6600
9000
12 000
15 000
20 400
(177)
(241)
(322)
(402)
(547)
4700
5100
7200
10 200
15 600
(126)
(137)
(193)
(273)
(418)
7800
9000
13 800
17 400
26 200
(209)
(241)
(370)
(466)
(702)
200 (13,8)
225
300
400600
(15,5)
(20,7)
(27,6)(41,4)
1900
2500
34004300
(50,9)
(67,0)
(91,1)(115)
2700
4000
51007800
(72,4)
(107)
(137)(209)
3300
3900
53006600
(88,4)
(105)
(142)(177)
5600
6600
840011 400
(150)
(177)
(225)(306)
6600
10 200
12 60018 000
(177)
(273)
(338)(482)
12 000
16 800
21 00030 000
(322)
(450)
(563)(804)
7200
10 800
13 20018 000
(193)
(289)
(354)(482)
12 600
18 600
24 00035 400
(338)
(498)
(643)(949)
300 (20,7)
350
400
600
(24,1)
(27,6)
(41,4)
3100
3400
4300
(83,1)
(91,1)
(115)
4600
5300
7800
(123)
(142)
(209)
5400
5700
7200
(145)
(153)
(193)
9600
10 200
12 600
(257)
(273)
(338)
12 600
14 400
12 600
(338)
(386)
(338)
22 200
24 600
35 400
(595)
(659)
(949)
13 200
15 600
26 400
(354)
(418)
(708)
22 800
28 200
48 600
(611)
(756)
(1302)
Table 14. Types 95HT (Metal Diaphragm) and 95HP (Elastomer Diaphragm)
Capacities for 1-1/2 and 2-Inch Bodies (DN 40 and 50)
OUTLET PRESSURE
RANGE,
PSIG (bar)
OUTLET PRESSURE
SETTING,
PSIG (bar)
INLET PRESSURE,
PSIG (bar)
CAPACITIES IN SCFH (Nm³/h) OF AIR
1-1/2-Inch (DN 40) Body 2-Inch (DN 50) Body
10% Offset 20% Offset 10% Offset 20% Offset
15 to 100
(1,0 to 6,9)
15 (1,0)
30
50
100
(2,1)
(3,4)
(6,9)
1800
4500
7000
(48,2)
(121)
(188)
2800
6000
9500
(75,0)
(161)
(255)
2000
5000
10 000
(53,6)
(134)
(268)
3000
8000
16 000
(80,4)
(214)
(429)
200
300
500
600
(13,8)
(20,7)
(34,5)
(41,4)
14 000
21 000
28 000
30 000
(375)
(563)
(750)
(804)
18 000
25 000
30 000
32 000
(482)
(670)
(804)
(858)
31 000
31 000
33 000
34 000
(831)
(831)
(884)
(911)
33 000
33 000
35 000
36 000
(884)
(884)
(938)
(965)
50 (3,4)
60
100
200
300
500
600
(4,1)
(6,9)
(13,8)
(20,7)
(34,5)
(41,4)
6500
12 000
24 000
36 000
54 000
60 000
(174)
(322)
(643)
(965)
(1447)
(1608)
11 000
18 000
37 000
50 000
62 000
67 000
(295)
(482)
(992)
(1340)
(1662)
(1796)
8000
30 000
63 000
78 000
88 000
92 000
(214)
(804)
(1688)
(2090)
(2358)
(2466)
13 000
36 000
73 000
85 000
92 000
95 000
(348)
(965)
(1956)
(2278)
(2466)
(2546)
100 (6,9)
125
200
300
500600
(8,6)
(13,8)
(20,7)
(34,5)(41,4)
20 000
30 000
48 000
75 00082 000
(536)
(804)
(1286)
(2010)(2198)
32 000
55 000
75 000
95 000103 000
(858)
(1474)
(2010)
(2546)(2760)
40 000
82 000
107 000
127 000133 000
(1072)
(2198)
(2868)
(3404)(3564)
45 000
97 000
117 000
130 000135 000
(1206)
(2600)
(3136)
(3484)(3618)
60 to 260
(4,1 to 17,9)
125 (8,6)
150
200
300
500
600
(10,3)
(13,8)
(20,7)
(34,5)
(41,4)
16 000
20 000
36 000
48 000
52 000
(429)
(536)
(965)
(1286)
(1394)
26 000
33 000
52 000
85 000
95 000
(697)
(884)
(1394)
(2278)
(2546)
17 000
20 000
50 000
110 000
125 000
(456)
(536)
(1340)
(2948)
(3350)
26 000
34 000
75 000
160 000
170 000
(697)
(911)
(2010)
(4288)
(4556)
200 (13,8)
225
300
500
600
(15,5)
(20,7)
(34,5)
(41,4)
27 000
40 000
72 000
90 000
(724)
(1072)
(1930)
(2412)
51 000
72 000
120 000
130 000
(1367)
(1930)
(3216)
(3484)
28 000
42 000
100 000
125 000
(750)
(1126)
(2680)
(3350)
52 000
80 000
170 000
180 000
(1394)
(2144)
(4556)
(4824)
250 (17,2)
275
300
500
600
(19,0)
(20,7)
(34,5)
(41,4)
30 000
45 000
74 000
84 000
(804)
(1206)
(1983)
(2251)
60 000
80 000
129 000
145 000
(1608)
(2144)
(3457)
(3886)
30 000
40 000
93 000
110 000
(804)
(1072)
(2492)
(2948)
60 000
80 000
168 000
182 000
(1608)
(2144)
(4502)
(4878)
60 to 300
(4,1 to 20,7)
Type 95HP only
300 (20,7)
350
400
500
600
(24,1)
(27,6)
(34,5)
(41,4)
53 000
64 000
95 000
112 000
(1420)
(1715)
(2546)
(3002)
94 000
115 000
145 000
168 000
(2519)
(3082)
(3886)
(4502)
54 000
70 000
110 000
136 000
(1447)
(1876)
(2948)
(3645)
97 000
128 000
163 000
199 000
(2600)
(3430)
(4368)
(5333)
- Shaded areas indicate capacities limited due to boost.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 29/104
95H Series Pressure Reducing Regulators
29
AIR P RODUCTS
Table 15. Types 95H, 95HP, and 95HT Dimensions and Shipping Weights
BODY SIZE,
INCHES (DN)
DIMENSIONS, INCHES (mm) APPROXIMATE
SHIPPING WEIGHTS
FOR NPT BODIES,
POUNDS (kg)
A
B C DCast Iron Steel or Stainless Steel
1/4 2.25 (57) 2.75 (70) 1.81 (46) 4.50 (114) 3.19 (81) 4 (1,8)
1/2 (15) 3.88 (99) 4.00 (102) 1.81 (46) 6.00 (152) 4.25 (108) 8 (3,6)
3/4, 1 (20, 25) 4.88 (124) 5.00 (127) 2.25 (57) 9.12 (232) 6.06 (154) 20 (9,1)
1-1/2, 2 (40, 50) 7.25 (184) 7.25 (184) 2.88 (73) 14.69 (373) 8.19 (208) 73 (33,1)
Table 16. Type 95HD Dimensions and Shipping Weights
BODY SIZE,
INCHES (DN)
DIMENSIONS, INCHES (mm)APPROXIMATE
SHIPPING WEIGHTS
FOR NPT BODIES,
POUNDS (kg)
A
B C D E (NPT) JCast Iron
Steel or
Stainless Steel
1/4 2.25 (57) 2.75 (70) 1.81 (46) 7.88 (200) 3.19 (81) 1/8 2.75 (70) 4 (1,8)
1/2 (15) 3.88 (99) 4.00 (102) 1.81 (46) 10.00 (254) 4.25 (108) 1/4 4.00 (102) 8 (3,6)
3/4, 1 (20, 25) 4.88 (124) 5.00 (127) 2.25 (57) 15.12 (384) 6.06 (154) 1/4 4.00 (102) 20 (9,1)
1-1/2, 2 (40, 50) 7.25 (184) 7.25 (184) 2.88 (73) 18.31 (465) 8.19 (208) 1/4 6.75 (171) 73 (33,1)
Figure 4. Dimensions
7
(178)14
(356)
FLANGED BODIES AVAILABLE IN 1/2, 3/4, 1, 1-1/2, AND 2-INCH
(DN 15, 20, 25, 40, AND 50) BODY SIZES WITH CL150 RF,
CL300 RF, AND PN 16/25/40 END CONNECTION STYLES
AJ3324-H
A0810-2 / IL
INCHES(mm)
TYPES 95H, 95HP, AND 95HT
B
C
(MAXIMUM)
BODY
SIZE(NPT)
D
14A4040-D / ILA
TYPE 95HD
AE9236-F
A0811-2 / IL
B
C(MAXIMUM)
BODYSIZE
(NPT)
D
A
J
E (NPT)
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 30/104
95H Series Pressure Reducing Regulators
30
AIR P RODUCTS
Ordering Guide
- continued -
Type (Select One)
95H***
95HD (differential)***
95HP (high pressure)***
95HT (high temperature)***
Body Size (Select One)
1/4-inch (NPT only) 1-inch (DN 25)
1/2-inch (DN 15) 1-1/2-inch (DN 40)
3/4-inch (DN 20) 2-inch (DN 50)
Body Material and End Connection Style (Select One)
Cast Iron
NPT***
WCC Steel CF8M Stainless Steel
NPT*** NPT***
CL150 RF*** CL150 RF***
CL300 RF*** CL300 RF***
SWE** SWE**
PN 16/25/40* PN 16/25/40*
Monel® Hastelloy® C
NPT* NPT* CL150 RF* CL150 RF*
CL300 RF* CL300 RF*
SWE* SWE*
PN 16/25/40* PN 16/25/40*
Spring Case Material (Select One)
Cast iron (standard for cast iron bodies)***
WCC Steel (standard for steel or stainless steel bodies)***
CF8M Stainless steel (optional for stainless steel bodies)**
Diaphragm - See Table 4 (Select One)
Neoprene (CR) (standard for Type 95H or 95HP)***
Fluoroelastomer (FKM)***
302 Stainless steel (standard for Type 95HT)*** Ethylenepropylene (EPDM)*
Monel®*
Hastelloy® C*
Trim Material - See Table 4 (Select One)
Metal Seat
416 Stainless steel (standard)*** Monel*
316 Stainless steel*** Hastelloy C*
Brass**
Elastomer Seat (select one from each column)
Disk Holder Disk
Brass*** Neoprene (CR) or Nitrile (NBR)*** 416 Stainless steel*** Fluoroelastomer (FKM)***
316 Stainless steel*** PTFE**
Monel* Ethylenepropylene**
Hastelloy* Peruoroelastomer (FFKM)**
Outlet Pressure Range (Select One)
Types 95H and 95HD with 1/4 and 1/2 to 1-inch
(DN 15 through 25) body sizes
15 to 30 psig (1 to 2,1 bar)***
25 to 75 psig (1,7 to 5,2 bar)***
70 to 150 psig (4,8 to 10,3 bar)***
Types 95H and 95HD with 1-1/2 to 2-inch
(DN 40 to 50) body sizes 5 to 80 psig (0,3 to 5,5 bar)***
60 to 120 psig (4,1 to 8,3 bar)***
100 to 140 psig (6,9 to 9,7 bar)***
120 to 150 psig (8,3 to 10,3 bar)***
Type 95HT with 1/4 and 1/2 to 1-inch
(DN 15 through 25) body sizes
15 to 100 psig (1 to 6,9 bar)***
80 to 300 psig (5,5 to 20,7 bar)***
Type 95HT with 1-1/2 to 2-inch (DN 40 to 50) body sizes
15 to 100 psig (1 to 6,9 bar)***
60 to 260 psig (4,1 to 17,9 bar)***
Type 95HP with 1/4 and 1/2 to 1-inch
(DN 15 through 25) body sizes
15 to 100 psig (1 to 6,9 bar)***
80 to 400 psig (5,5 to 27,6 bar)***
Type 95HP with 1-1/2 to 2-inch (DN 40 to 50) body sizes
15 to 100 psig (1 to 6,9 bar)***
60 to 300 psig (4,1 to 20,7 bar)***
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 31/104
95H Series Pressure Reducing Regulators
31
AIR P RODUCTS
Specication Worksheet
Application:
Specic Use
Line Size
Fluid Type
Specic Gravity
Temperature
Does the Application Require Overpressure Protection?
Yes No
Pressure:
Maximum Inlet Pressure
Minimum Inlet Pressure
Differential Pressure
Set Pressure
Maximum Flow
Accuracy Requirements:
Less Than or Equal To:
5% 10% 20% 40%
Construction Material Requirements (if known):
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your local
Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your local
Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
PTFE Diaphragm Protector - See Table 4 (Optional)
Yes (available with Neoprene (CR) or Fluoroelastomer (FKM) or
Ethylenepropylene (EPDM) diaphragm)***
Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match this order.
Ordering Guide (continued)
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 32/104
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 33/104
95L Series Pressure Reducing Regulators
33
AIR P RODUCTS
Table 4. Trim Materials
ELASTOMER SEAT
Part Name Standard Optional
Diaphragm Neoprene (CR) or Fluoroelastomer (FKM)
302 Stainless steel
Ethylenepropylene (EPDM)
Monel®
Hastelloy® C
olytetrauoroethylene � protector available
with elastomeric diaphragm
Disk Neoprene (CR) or Fluoroelastomer (FKM)
PTFE
Nitrile (NBR)
Ethylenepropylene (EPDM)
eruoroelastomer �KM
Disk Holder Brass or 416 Stainless steel
316 Stainless steel
Monel
Hastelloy C
Valve Plug Guide Brass or 416 Stainless steel
316 Stainless steel
Monel
Hastelloy C
Valve Plug Brass or 416 Stainless steel
316 Stainless steel
Monel
Hastelloy C
Orice Brass or 416 Stainless steel
316 Stainless steel
Monel
Hastelloy C
Stem Assembly Brass or 416 Stainless steel
316 Stainless Steel
Monel
Hastelloy C
METAL SEAT
Diaphragm 302 Stainless SteelMonel
Hastelloy C
Disk 416 Stainless Steel
316 Stainless steel
Monel
Hastelloy C
Disk Holder Brass or 416 Stainless Steel
316 Stainless steel
Monel
Hastelloy C
Valve Plug 416 Stainless Steel
316 Stainless steel
Monel
Hastelloy C
Brass
Valve Plug Guide Brass or 416 Stainless Steel
316 Stainless steel
Monel
Hastelloy C
Brass
Orice Brass or 416 Stainless Steel
316 Stainless steel
Monel
Hastelloy C
Stem Assembly Brass or 416 Stainless Steel
316 Stainless steel
Monel
Hastelloy C
Gaskets Composition Graphite
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 34/104
95L Series Pressure Reducing Regulators
34
AIR P RODUCTS
Table 5. Temperature Ranges for Metal Parts(1)(2)
BODY AND SPRING
CASE MATERIALSTEMPERATURE RANGE
Cast ironStandard Construction
-40° to 406°F (-40° to 208°C)
Steel -20° to 450°F (-29° to 232°C)
Stainless steel -40° to 450°F (-40° to 232°C)
1. The temperature limits in this Application Guide, and any applicable standard or
code limitation for this regulator should not be exceeded.
2. Pressures and/or the body end connection may decrease these maximum temperatures.
Table 6. Temperature Ranges for Soft Parts
MATERIAL TEMPERATURE RANGE
Nitrile (NBR)
Neoprene (CR)
Fluoroelastomer (FKM)
eruoroelastomer �KM
Ethylenepropylene (EDPM)
PTFE
-40° to 180°F (-40° to 82°C)
-40° to 180°F (-40° to 82°C)
0° to 300°F (-18° to 149°C)
0 to 450°F (-18 to 232°C)
-40° to 275°F (-40° to 135°C)
-40° to 400°F (-40° to 204°C)
1. The temperature limits in this Application Guide, and any applicable standard or
code limitation for this regulator should not be exceeded.
2. Pressures and/or the body end connection may decrease these maximum temperatures.
Table 7. Maximum Cold Working Pressures of Body Sizes and Materials(1)(2)
TYPES BODY SIZEBODY AND SPRING
CASE MATERIALS
MAXIMUM INLET
PRESSURE, PSIG (bar)
MAXIMUM OUTLET
PRESSURE, PSIG (bar)
95L, 95LD All Sizes
Cast iron
Steel
Stainless steel
250 (17,2)
300 (20,7)
300 (20,7)
50 (3,4)
125 (8,6)
125 (8,6)
1. The pressure limits in this Application Guide, and any applicable standard or code limitation should not be exceeded.
2. Temperature and/or the body end connection may decrease these maximum pressures.
Table 8. Flow and Sizing Coefcients
BODY SIZE,
INCHES (DN)
WIDE-OPEN COEFFICIENTS (FOR RELIEF SIZING)C
1K
m
IEC SIZING COEFFICIENTS
Cv
Cg
CS
XT
FD
FL
1/4 0.8 28 1.40 35 0.83 0.775 0.58 0.91
1/2 (15) 1.9 67 3.35 35 0.71 0.775 0.58 0.84
3/4, 1 (20, 25) 4.4 156 7.80 35 0.67 0.775 0.44 0.82
1-1/2, 2 (40, 50) 12.5 475 23.75 38 0.83 0.913 0.37 0.91
Table 9. Outlet Pressure Ranges
TYPEBODY SIZE,
INCHES (DN)
OUTLET PRESSURE RANGE(1),
PSIG (bar)
SPRING WIRE DIAMETER,
INCHES (mm)
SPRING PART NUMBER
AND COLOR
95L
1/4
2 to 6
5 to 15
13 to 30
(138 mbar to 0,4 bar)
(0,3 to 1,0)
(0,9 to 2,1)
0.148 (3,76)
0.172 (4,37)
0.207 (5,26)
1E392527022 Yellow
1E392627012 Green
1E392727142 Red
1/2 (15)
2 to 6
5 to 15
13 to 30
(138 mbar to 0,4 bar)
(0,3 to 1,0)
(0,9 to 2,1)
0.207 (5,26)
0.234 (5,94)
0.281 (7,14)
1E395627022 Yellow
1D745527142 Green
1E395727192 Red
3/4, 1 (20, 25)
2 to 6
5 to 15
13 to 30
(138 mbar to 0,4 bar)
(0,3 to 1,0)
(0,9 to 2,1)
0.306 (7,77)
0.343 (8,71)
0.406 (10,3)
1E398927022 Yellow
1E399027142 Green
1E399127162 Red
1. For Type 95LD regulators, the pressure ranges indicate the differential pressure that can be obtained with the indicated spring. The differential pressure (spring setting) is added to
the spring case loading pressure to determine the actual outlet pressure.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 35/104
95L Series Pressure Reducing Regulators
35
AIR P RODUCTS
Table 10. Type 95L Capacities for 1/4 and 1/2 through 1-Inch (DN 15 through 25)
Body Sizes with Elastomer Diaphragm(1)
OUTLET
PRESSURE
RANGE,
PSIG (bar)
OUTLET
PRESSURE
SETTING,
PSIG (bar)
INLET
PRESSURE,
PSIG (bar)
CAPACITIES IN SCFH (Nm³/h) OF AIR
1/4-Inch Body 1/2-Inch (DN 15) Body 3/4-Inch (DN 20) Body 1-Inch (DN 25) Body
10% Offset 20% Offset 10% Offset 20% Offset 10% Offset 20% Offset 10% Offset 20% Offset
2 to 6
(138 mbar to
0,4 bar)
5 (0,3)
20 (1,4)
50 (3,4)
100 (6,9)
200 (13,8)
250 (17,2)
300 (8,04)
450 (12,1)
500 (13,4)
500 (13,4)
500 (13,4)
530 (14,2)
600 (16,1)
630 (16,9)
630 (16,9)
630 (16,9)
500 (13,4)
600 (16,1)
700 (18,8)
700 (18,8)
700 (18,8)
750 (20,1)
850 (22,8)
900 (24,1)
900 (24,1)
900 (24,1)
1900 (50,9)
3500 (93,8)
4200 (113)
4200 (113)
4200 (113)
3400 (91,1)
5500 (147)
7200 (193)
8300 (222)
8300 (222)
2200 (59,0)
4200 (113)
5000 (134)
5000 (134)
5000 (134)
4000 (107)
6500 (174)
8500 (228)
9800 (263)
10 000 (268)
5 to 15
(0,3 to 1,0)
10 (0,7)
20 (1,4)
50 (3,4)
100 (6,9) 200 (13,8)
250 (17,2)
500 (13,4)
750 (20,1)
750 (20,1) 750 (20,1)
750 (20,1)
680 (18,2)
930 (24,9)
1000 (26,8) 1000 (26,8)
1000 (26,8)
750 (20,1)
1000 (26,8)
1000 (26,8) 1000 (26,8)
1000 (26,8)
1100 (29,5)
1400 (37,5)
1400 (37,5)1400 (37,5)
1400 (37,5)
1700 (45,6)
2800 (75,0)
6400 (172) 8500 (228)
8500 (228)
2500 (67)
5300 (142)
9300 (249)13 000 (348)
13 000 (348)
2000 (53,6)
3300 (88,4)
7500 (201)10 000 (268)
10 000 (268)
3000 (80,4)
6300 (169)
11 000 (295)15 000 (402)
15 000 (402)
15 (1,0)
20 (1,4)
50 (3,4)
100 (6,9)
200 (13,8)
250 (17,2)
450 (12,1)
900 (24,1)
1000 (26,8)
1000 (26,8)
1000 (26,8)
700 (18,8)
1200 (32,2)
1300 (34,8)
1300 (34,8)
1300 (34,8)
800 (21,4)
1300 (34,8)
1400 (37,5)
1400 (37,5)
1400 (37,5)
1200 (32,2)
1600 (42,9)
1800 (48,2)
1800 (48,2)
1800 (48,2)
1900 (50,9)
5100 (137)
8500 (228)
11 000 (295)
11 000 (295)
2700 (72,4)
7200 (193)
13 000 (348)
15 000 (402)
15 000 (402)
2200 (59,0)
6000 (161)
10 000 (268)
13 000 (348)
13 000 (348)
3200 (85,8)
8500 (228)
15 000 (402)
18 000 (482)
18 000 (482)
13 to 30
(0,9 to 2,1)
20 (1,4)
30 (2,1)
50 (3,4)
100 (6,9)
200 (13,8)
250 (17,2)
550 (14,7)
900 (24,1)
1100 (29,5)
1100 (29,5)
1100 (29,5)
850 (22,8)
1300 (34,8)
1500 (40,2)
1500 (40,2)
1500 (40,2)
1100 (29,5)
1400 (37,5)
1600 (42,9)
1600 (42,9)
1600 (42,9)
1500 (40,2)
1800 (48,2)
2100 (56,3)
2100 (56,3)
2100 (56,3)
2500 (67,0)
4600 (123)
8000 (214)
13 000 (348)
13 000 (348)
3800 (102)
6800 (182)
13 000 (348)
17 000 (456)
17 000 (456)
3000 (80,4)
5500 (147)
9500 (255)
15 000 (402)
15 000 (402)
4500 (121)
8000 (214)
15 000 (402)
20 000 (536)
20 000 (536)
30 (2,1)
50 (3,4)
100 (6,9)
200 (13,8)
250 (17,2)
1200 (32,2)
1800 (48,2)
1900 (50,9)
1900 (50,9)
1500 (40,2)
2500 (67,0)
2500 (67,0)
2500 (67,0)
2000 (53,6)
2400 (64,3)
2500 (67,0)
2500 (67,0)
2700 (72,4)
3600 (96,5)
3600 (96,5)
3600 (96,5)
4200 (113)
8500 (228)
14 000 (375)
14 000 (375)
6400 (172)
13 000 (348)
22 000 (590)
22 000 (590)
5000 (134)
10 000 (268)
17 000 (456)
17 000 (456)
7500 (201)
15 000 (402)
26 000 (697)
26 000 (697)
1. To obtain capacities for regulators using metal diaphragms, multiply the table values by 0.8.
Table 11. Dimensions and Shipping Weights
BODY SIZE,
INCHES (DN)
DIMENSIONS, INCHES (mm)APPROXIMATE
SHIPPING
WEIGHTS FOR
NPT BODIES,
POUNDS (kg)
A
B
C
D E (NPT)(1) J(1)
Cast IronSteel or
Stainless SteelType 95L Type 95LD
1/4 2.25 (57) 2.75 (70) 1.81 (46) 4.62 (117) 7.94 (202) 5.06 (129) 1/8 2.75 (70) 6 (2,7)
1/2 (15) 3.88 (99) 4.00 (102) 1.81 (46) 6.12 (155) 10.12 (257) 7.00 (178) 1/4 4.0 (102) 12 (5,4)
3/4, 1 (20, 25) 4.88 (124) 5.00 (127) 2.25 (57) 9.12 (232) 15.31 (389) 10.19 (259) 1/4 4.0 (102) 32 (14,5)
1. Dimensions “E” and “J” only apply to Type 95LD.
Figure 3. Dimensions
INCHES
(mm)
D
C(MAXIMUM)
B
A
BODYSIZE
(NPT)
TYPE 95L
7(178)
14
(356)
FLANGED BODIES AVAILABLE IN 1/2, 3/4, AND
1-INCH (DN 15, 20, AND 25) BODY SIZES WITH CL150 RF,CL300 RF, OR PN 16/25/40 END CONNECTIONS
AJ3324-H A0810-2 / IL
4A4040-D / IL
D
C (MAXIMUM)
B
C(MAXIMUM)
D
J
B
A
BODYSIZENPT
E-NPT
B2550 TYPE 95LD
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 36/104
95L Series Pressure Reducing Regulators
36
AIR P RODUCTS
Specication Worksheet
Application:
Specic Use
Line Size
Fluid TypeSpecic Gravity
Temperature
Does the Application Require Overpressure Protection?
Yes No
Pressure:
Maximum Inlet Pressure
Minimum Inlet Pressure
Differential Pressure
Set Pressure
Maximum Flow
Accuracy Requirements:
Less Than or Equal To:
5% 10% 20% 40%
Construction Material Requirements (if known):
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your local
Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your local
Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
Type (Select One)
95L*** 95LD***
Body Size (Select One)
1/4-inch (NPT only) 1/2-inch (DN 15)
3/4-inch (DN 20) 1-inch (DN 25)
Body Material and End Connection Style (Select One)
Cast Iron
NPT***
WCC Steel CF8M Stainless Steel
NPT*** NPT***
SWE** SWE**
CL150 RF** CL150 RF**
CL300 RF** CL300 RF**
PN 16/25/40** PN 16/25/40**
Monel® Hastelloy® C
NPT* NPT*
SWE* SWE*
CL150 RF* CL150 RF*
CL300 RF* CL300 RF*
PN 16/25/40* PN 16/25/40*
Spring Case Material (Select One)
Cast iron (standard for cast iron bodies)***
WCC Steel (standard for steel or
stainless steel bodies)***
CF8M Stainless steel**
Diaphragm - See Table 4 (Select One)
Neoprene (CR) (standard for Type 95L)***
Fluoroelastomer (FKM)***
302 Stainless steel***
Ethylenepropylene (EPDM)**
Monel®*
Hastelloy® C*
Ordering Guide
PTFE Diaphragm Protector - See Table 4 (Optional)
Yes (available with Neoprene (CR), Fluoroelastomer (FKM),
or Ethylenepropylene (EPDM) diaphragm)***
Trim Material - See Table 4 (Select One)
Metal Seat
416 Stainless steel***
316 Stainless steel** Monel*
Brass** Hastelloy C*
Elastomer Seat (select one from each column)
Disk Holder Disk
Brass*** Neoprene (CR)***
416 Stainless steel*** Fluoroelastomer (FKM)***
316 Stainless steel*** Nitrile (NBR)***
Monel* PTFE**
Hastelloy C* Ethylenepropylene (EPDM)**
Peruoroelastomer**
Outlet Pressure Range (Select One)
2 to 6 psig (138 mbar to 0,4 bar)***
5 to 15 psig (0,3 to 1 bar)***
13 to 30 psig (0,9 to 2,1 bar)***
Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match this order.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 37/104
Type 119 Switching Valve
37
AIR P RODUCTS
Introduction
The Type 119 switching valve is used for
on-off or throttling control of non-corrosive or
mildly corrosive gases. It is designed to meet
low-pressure gas application requirements in
many varied industries.
Body Sizes and End Connection Styles
3/4, 1, or 1-1/4-inch threaded NPT
Actuator Pressure Connection
1/4-inch NPT female
Spring Case and Bonnet Vents
1/4-inch NPT female
Maximum Inlet Pressure
150 psig (10,3 bar)
Maximum Pressure Drop
150 psig (10,3 bar)
Valve Travel
3/16-inch (4,8 mm)
Temperature Capabilities
Nitrile (NBR):
-20° to 180°F (-29° to 82°C)Fluoroelastomer (FKM):
0° to 250°F (-18° to 121°C)
Approximate Shipping Weight
6 pounds (2,7 kg)
Additional Technical Data
For more technical information, contact
your local Sales Ofce or log on to:
www.emersonprocess.com/regulators
Figure 1. Type 119 Switching Valve
Table 1. Spring Selection
SPRING RANGE, PSIG (bar) SPRING PART NUMBER COLOR
3 to 15 (207 mbar to 1,0 bar)
5 to 20 (0,3 to 1,4)
1D892327022
1D751527022
Red
Silver
5 to 35 (0,3 to 2,4)
30 to 60 (2,1 to 4,1)
1D665927022
1D745527142
Blue
Green
Table 2. Construction Materials
BODYSPRING CASE
AND BONNET
DIAPHRAGM, DISK,
AND O-RINGS
ORIFICE AND
DISK HOLDER
Cast iron AluminumNitrile (NBR) or
Fluoroelastomer (FKM)
Aluminum or
Stainless steel
Figure 2. Type 119 Operational Schematic
M1033
W3735
Features
• Easy Installation
• Quick and Easy Leak Detection
• Simple Spring Adjustment
• In-Line Maintenance
• Low Leakage
INLET PRESSURE
LOADING PRESSURE
ATMOSPHERIC PRESSURE
OUTLET PRESSURE
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 38/104
Type 119 Switching Valve
38
AIR P RODUCTS
Table 3. Flow CoefcientsORIFICE SIZE,
INCHES (mm)
3/4-INCH BODY 1-INCH BODY 1-1/4-INCH BODY
Cg
Cv
C1
Cg
Cv
C1
Cg
Cv
C1
1/8 (3,2)
3/16 (4,8)
1/4 (6,4)
12.5
27.8
48.3
0.43
0.95
1.70
29.1
29.3
28.4
12.5
27.8
48.3
0.43
0.95
1.70
29.1
29.3
28.4
12.5
27.8
48.3
0.43
0.95
1.70
29.1
29.3
28.4
5/16 (7,9)
3/8 (9,5)
1/2 (12,7)
9/16 (14,3)
76.5
104
176
213
2.64
3.22
4.7
5.6
29.0
32.3
37.4
38.0
76.5
105
178
218
2.64
3.3
5.0
5.9
29.0
31.8
35.6
36.9
76.5
106
183
230
2.64
3.57
5.75
7.2
29.0
29.7
31.8
31.9
Table 4. IEC Sizing Coefcients
ORIFICE SIZE,
INCHES (mm)
3/4-INCH
BODY
1-INCH
BODY
1-1/4-INCH
BODY FD
FL
Km
XT
XT
XT
1/8 (3,2)
3/16 (4,8)
1/4 (6,4)
0.54
0.54
0.51
0.54
0.54
0.51
0.54
0.54
0.51
0.50 0.89 0.79 5/16 (7,9)
3/8 (9,5)
1/2 (12,7)
9/16 (14,3)
0.53
0.66
0.89
0.91
0.53
0.64
0.80
0.86
0.53
0.56
0.64
0.64
CONTROL
SIGNAL
8.00
(203)MAXIMUM
1.53
(38,9)
INCHES
(mm)
2.12(54)
4.00(102)
BONNETVENT
4.12(105)
Figure 3. Dimensions
37A8078
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 39/104
Type 119 Switching Valve
39
AIR P RODUCTS
Ordering Guide
Body Size (Select One)
3/4-inch***
1-inch***
1-1/4-inch***
Disk (Select One)
Nitrile (NBR)***
Fluoroelastomer (FKM)**
Disk Holder (Select One) Aluminum***
Stainless steel**
Orifice (Select One)
Aluminum***
Stainless steel**
Orifice Size (Select One)
1/8-inch (3,2 mm)***
3/16-inch (4,8 mm)***
1/4-inch (6,4 mm)***
5/16-inch (7,9 mm)***
3/8-inch (9,5 mm)***
1/2-inch (12,7 mm)*** 9/16-inch (14,3 mm)***
Diaphragm (Select One)
Nitrile (NBR)***
Fluoroelastomer (FKM)**
O-Rings (Select One)
Nitrile (NBR)***
Fluoroelastomer (FKM)**
Spring Range (Select One)
3 to 15 psig (207 mbar to 1 bar)*** 5 to 20 psig (0,3 to 1,4 bar)***
5 to 35 psig (0,3 to 2,4 bar)***
30 to 60 psig (2,1 to 4,1 bar)***
Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match this order.
Specication Worksheet
Application:
Specic Use
Line Size
Fluid Type
Specic GravityTemperature
Does the Application Require Overpressure Protection?
Yes No
Pressure:
Maximum Inlet Pressure
Minimum Inlet Pressure
Differential Pressure
Set Pressure
Maximum Flow
Accuracy Requirements:
Less Than or Equal To:
5% 10% 20% 40%
Construction Material Requirements (if known):
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your local
Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your local
Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 40/104
Types 164 and 164A Switching Valves
40
AIR P RODUCTS
Introduction
The Types 164 and 164A switching
valves are pneumatically operated and
controlled units, built with a wide range
of capabilities to handle those switching
applications that involve venting, on-off
control, and failure modes.
With its two ports, the Type 164 switching
valve is typically used as a normally open
on-off switch, while the Type 164A
switching valve directs ow throughthree ports. Additionally, the Type 164A
provides on-off capability when one of its
three ports is plugged.
The Types 164 and 164A switching valves
share the same basic construction, except
that where the Type 164A switching valve
has a part containing port B, the Type 164
switching valve has a plug.
Features
End Connection Styles
See Table 2
Maximum Valve Body Pressure
250 psig (17,2 bar)
Maximum Diaphragm Pressure
Type 164: 200 psig (13,8 bar)
Type 164A: 100 psig (6,9 bar)
Temperature Capabilities
-20° to 150°F (-29° to 66°C)
Flow Coefficients
See Table 2
Additional Technical Data
For more technical information, contact
your local Sales Ofce or log on to:
www.emersonprocess.com/regulators
Figure 1. Type 164 Switching Valve
Table 1. Construction Materials
BODYSPRING
CASE
DISK
HOLDERDISK
DIAPHRAGM
AND O-RINGSSPRING
CLOSING
CAP
(OPTIONAL)
Aluminum Aluminum
or Cast IronBrass
Neoprene or
Fluoroelastomer
(FKM)
Nitrile (NBR) or
Fluoroelastomer
(FKM)
Steel Brass
W0128_1
Figure 2. Type 164A Switching Valve
W0128_1
• Versatile
• Easy, Accurate Adjustment
• Rugged, Compact Construction
PORT C
PORT D
VENT
PORT A
PORT B
M1039
Figure 3. Type 164 Operational Schematic
PORT A
PORT B
INLET PRESSURE
OUTLET PRESSURE
ATMOSPHERIC PRESSURE
PORT C
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 41/104
Types 164 and 164A Switching Valves
41
AIR P RODUCTS
Table 2. Specications
TYPEAVAILABLE
CONFIGURATIONS
CONNECTIONS FLOW COEFFICIENTS
Port End Connection Style Flow Path Cg
Cv
C1
164 2-way switching valve A and C 1/4 or 1/2-inch NPT
Port A to Port C 26.6 0.76
35D 1/4-inch NPT
164A 3-way switching valve A and C 1/4 or 1/2-inch NPT Port A to Port B 15.0 0.43
B and D 1/4-inch NPT Port A to Port C 26.6 0.76
Table 3. Spring Information
TYPE SPRING RANGE(1), PSIG (bar) SPRING PART NUMBER AND COLORMAXIMUM PRESSURE CHANGE ON
DIAPHRAGM FOR FULL STROKE, PSID (bar d)
164 or 164A
switching valve
3 to 15 (207 mbar to 1,0 bar) 1D892327022, Red 2.25 (0,2)
5 to 20 (0,3 to 1,4) 1D751527022, Silver 2.5 (0,2)
5 to 35 (0,3 to 2,4) 1D665927022, Blue 4 (0,3)
30 to 60 (2,1 to 4,1) 1D745527142, Green 5.75 (0,4)
40 to 100 (2,8 to 6,9) 1E543627142, Yellow 11 (0,8)
164 switching
valve only
80 to 150
130 to 200
(5,5 to 10,3)
(9,0 to 13,8)(2) 1P901327142, Brown 16 (1,1)
1. All springs listed can be adjusted to 0 psig (0 bar).
2. Requires diaphragm head with part number 1P901425062.
9.19 MAXIMUM(233) 1
2.50(63,5)
1/4-INCH
NPT2.88
(73)
2
INCHES(mm)
1
2
DIMENSION SHOWN IS FORTYPE 164A SWITCHING VALVE. FOR
TYPE 164 SWITCHING VALVE THISDIMENSION IS 8.28 (210)
1.59 (40) FOR TYPE 164
SWITCHING VALVE
4.12(105)
Figure 4. Dimensions
A2426
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 42/104
Types 164 and 164A Switching Valves
42
AIR P RODUCTS
Ordering Guide
Type 164
Port Size (Select One)
Ports A and C - 1/4-inch NPT***
Ports A and C - 1/2-inch NPT***
Spring Range (Select One)
3 to 15 psig (207 mbar to 1 bar)***
5 to 20 psig (0,3 to 1,4 bar)***
5 to 35 psig (0,3 to 2,4 bar)*** 30 to 60 psig (2,1 to 4,1 bar)***
40 to 100 psig (2,8 to 6,9 bar)***
80 to 150 psig (5,5 to 10,3 bar)***
130 to 200 psig (9 to 13,8 bar)***
Diaphragm (Select One)
Nitrile (NBR)***
Fluoroelastomer (FKM)**
Valve Disk (Select One)
Neoprene***
Fluoroelastomer (FKM)**
Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match this order.
Quantity
Type 164A
Port Size (Select One From Each Group)
Ports A and C - 1/4-inch NPT***
Ports A and C - 1/2-inch NPT***
Port B - 1/4-inch NPT***
Port B - 1/2-inch NPT***
Spring Range (Select One)
3 to 15 psig (207 mbar to 1 bar)*** 5 to 20 psig (0,3 to 1,4 bar)***
5 to 35 psig (0,3 to 2,4 bar)***
30 to 60 psig (2,1 to 4,1 bar)***
40 to 100 psig (2,8 to 6,9 bar)***
Diaphragm (Select One)
Nitrile (NBR)***
Fluoroelastomer (FKM)**
Valve Disk (Select One)
Neoprene***
Fluoroelastomer (FKM)**
Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match this order.
Quantity
Specication Worksheet
Application:
Specic Use
Line Size
Fluid Type
Specic GravityTemperature
Does the Application Require Overpressure Protection?
Yes No
Pressure:
Maximum Inlet Pressure
Minimum Inlet Pressure
Differential Pressure
Set Pressure
Maximum Flow
Accuracy Requirements:
Less Than or Equal To:
5% 10% 20% 40%
Construction Material Requirements (if known):
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your local
Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your local
Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 43/104
Type 167A Three-Way Switching Valve
43
AIR P RODUCTS
LOW OUTLET
PRESSURE
HIGH OUTLET
PRESSURE
Introduction
The Type 167A three-way switching valve is
installed to provide switching or lock-up action
in the event that the system operation deviates
from normal. The compact size and simplicity
of this valve make it especially suitable for eld
or panel mounting.
End Connection Size and Style
Ports A, B, C, and D 1/4-inch threaded NPT
Flow CoefficientsSee Table 3
Temperature Capabilities
Nitrile (NBR):
-20° to 150°F (-29° to 66°C)
Fluoroelastomers (FKM):
0° to 300°F (-18° to 149°C)
Maximum Inlet Pressure
250 psig (17,2 bar) at connections
A, B, and C
Maximum Control Signal Pressure
100 psig (6,9 bar) at connection D
Additional Technical Data
For more technical information, contact
your local Sales Ofce or log on to:
www.emersonprocess.com/regulators
Table 1. Construction Materials
BODY, SPRING CASE, DISK
HOLDER, AND VALVE STEMDISK AND DIAPHRAGM SPRING
Aluminum Nitrile (NBR) or Fluoroelastomer (FKM) Steel
Table 2. Spring Selection
SPRING RANGE,
PSIG (bar)
SPRING PART
NUMBER AND COLOR
MAXIMUM PRESSURE CHANGE ON
DIAPHRAGM FOR FULL STROKE,
PSID (bar d)
5 to 18
(0,3 to 1,2)
1B986027212
Green5 (0,3)
18 to 30
(1,2 to 2,1)
1B788327022
Silver 8 (0,6)
30 to 100
(2,1 to 6,9)
1K748527202
Red15 (1,0)
Table 3. Flow Coefcients
Cg CV
C1Connection
A to B
Connection
A to C
Connection
A to B
Connection
A to C
11.5 13.3 0.33 0.38 35
Figure 1. Type 167A
Three-Way Switching Valve
PORT D
W1947
Figure 2. Type 167A Operational Schematic
PORT A
PORT B
PORT C
M1043
Figure 3. Dimensions
STANDARD (FIELD) MOUNTING
6.31 (160)
MAXIMUM
2.88
(73)
1.88 (48)
A C
DB
1.25(32)
0.5(13)
INCHES(mm) A1163_1
Features
• Convenient Installation• Easy, Accurate Adjustment
• Easy Maintenance
HIGH OUTLETPRESSURE
LOW OUTLET
PRESSURE
INLET PRESSUREOUTLET PRESSUREATMOSPHERIC PRESSURE
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 44/104
Type 167A Three-Way Switching Valve
44
AIR P RODUCTS
Ordering Guide
Disk and Diaphragm (Select One)
Nitrile (NBR)***
Fluoroelastomer (FKM)**
Spring Range for Standard Valve (Select One)
5 to 18 psig (0,3 to 1,2 bar)***
18 to 30 psig (1,2 to 2,1 bar)***
30 to 100 psig (2,1 to 6,9 bar)***
Replacement Parts Kit (Optional) Yes, send one replacement parts kit to match this order.
Quantity
Specication Worksheet
Application:
Specic Use
Line Size
Fluid Type
Specic GravityTemperature
Does the Application Require Overpressure Protection?
Yes No
Pressure:
Maximum Inlet Pressure
Minimum Inlet Pressure
Differential Pressure
Set Pressure
Maximum Flow
Accuracy Requirements:
Less Than or Equal To:
5% 10% 20% 40%
Construction Material Requirements (if known):
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your local
Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your local
Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 45/104
Types 168, 168H, and 68-2 Three-Way Switching Valves
45
AIR P RODUCTS
Introduction
The Types 168 and 168H three-way,
snap-acting switching valves provide
fast, positive switching of pneumatic
pressures in response to a predetermined
change in a pneumatic input signal. These
switches can be used to open and close
pneumatically operated control valves, to
load or exhaust pneumatic systems, or to
operate a variety of pneumatic equipment.
The Type 68-2 is a three-way, snap-acting switching valve that forms the
valve body portion of the Types 168 and
168H switching valves. A manual reset
switch may be adapted to the Types 168
and 168H switching valves to provide for
manual reset. An extension of the trip
lever allows the Type 68-2 to be used as a
manual switching valve.
Flow Coefficients
Cg: 7
Cv: 0.2
C1: 35
• Fast, Positive Switching Action
• Full Adjustability
• Three-Way or On/Off Action
• Automatic Or Manual Reset
Table 1. Available Congurations
TYPE DESCRIPTION
DIAPHRAGM
PRESSURE RANGES,
PSIG (bar)
68-2 Manual 3-way switching valve - - - -
168Pneumatically operated
3-way, snap-acting switching valve
2 to 40 (138 mbar to 2,8 bar)
2 to 60 (138 mbar to 4,1 bar)
168HPneumatically operated
3-way, snap-acting switching valve
35 to 100 (2,4 to 6,9)
50 to 150 (3,4 to 10,3)
Figure 1. Type 168 Switching Valve and
Type 68-2 Trip Lever
W1932_1
Temperature Capabilities
-10° to 150°F (-23° to 66°C)
Maximum Allowable Pressure
See Table 3
Diaphragm Pressure Ranges
Type 168: 2 to 60 psig (138 mbar to 4,1 bar)
in four ranges.
Type 168H: 35 to 150 psig
(2,4 to 10,3 bar) in four ranges.
Approximate Shipping Weights
Type 68-2: 0.5 pound (0,23 kg)
Type 168: 3 pounds (1,36 kg)
Type 168H: 5 pounds (2,27 kg)
Additional Technical Data
For more technical information, contact
your local Sales Ofce or log on to:
www.emersonprocess.com/regulators
Figure 2. Type 168 Operational Schematic
M1045
B
A
C
Features
INLET PRESSURE
OUTLET PRESSURE
ATMOSPHERIC PRESSURE
LOADING PRESSURE
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 46/104
Types 168, 168H, and 68-2 Three-Way Switching Valves
46
AIR P RODUCTS
Table 2. Construction Materials
BODY AND CASES DIAPHRAGM SEAT RINGS ROCKER ASSEMBLY O-RINGSACTUATOR
SPRING
VALVE
SPRING
TRIP
LEVER
STEM
PROTECTOR
AluminumDacron® covered
with Nitrile (NBR)Stainless steel
Glass-lled nylon with
polyurethane valve disksNitrile (NBR) Steel
Stainless
steel
Stainless
steelPlastic
Table 3. Maximum Pressures and Spring Colors
TYPES
DIAPHRAGM PRESSURE CHANGE
BETWEEN SWITCHING POINTS,
PSIG (bar)DIAPHRAGM PRESSURE RANGES,
PSIG (bar)
DIAPHRAGM
SPRING COLOR
MAXIMUM ALLOWABLE
BODY PRESSURE,
PSIG (bar)
BODY SPRING
COLOR
Minimum Maximum
68-2 - - - - - - - - - - - - - - - - 150 (10,3) Unpainted
168-1
168-2
168-3
168-4
10
10
10
7
(0,7)
(0,7)
(0,7)
(0,5)
58
38
58
38
(4,0)
(2,6)
(4,0)
(2,6)
2 to 60
2 to 40
2 to 60
2 to 40
(138 mbar to 4,1 bar)
(138 mbar to 2,8 bar)
(138 mbar to 4,1 bar)
(138 mbar to 2,8 bar)
Green
Yellow
Green
Yellow
150 (10,3)
150 (10,3)
40 (2,8)
40 (2,8)
Unpainted
Unpainted
Yellow
Yellow
168H-1
168H-2
168H-3
168H-4
20
20
20
16
(1,4)
(1,4)
(1,4)
(1,1)
100
65
100
65
(6,9)
(4,5)
(6,9)
(4,5)
50 to 150
35 to 100
50 to 150
35 to 100
(3,4 to 10,3)
(2,4 to 6,9)
(3,4 to 10,3)
(2,4 to 6,9)
Green
Yellow
Green
Yellow
150 (10,3)
150 (10,3)
40 (2,8)
40 (2,8)
Unpainted
Unpainted
Yellow
Yellow
Figure 3. Types 168 and 168H Dimensions
Table 4. Dimensions
TYPEDIMENSIONS, INCHES (mm)
E F G
168 3.56 (90,4) 6.69 (170) 10.0 (254)
168H 5.00 (127) 8.12 (206) 11.44 (291)
2.25(57,2)
2.75(69,9)
4.19
(106)DIAMETER
6.38
(162)
1.00(25,4)2.00
(50,8)
0.97(24,6)
3.62(91,9)
0.62(15,7)
G
F
E0.34(8,64)
0.75
(19,1)
5.31
(135)
4.25
(108)
0.25
(6,35)
1/4-INCH NPT
1/4-INCH NPTSUPPLY
CONNECTION
1/4-INCH NPT
OPTIONAL
MANUALRESET
1/4-INCH NPT
CONTROLCONNECTION
SCREENED VENT
INCHES(mm)1U9156
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 47/104
Types 168, 168H, and 68-2 Three-Way Switching Valves
47
AIR P RODUCTS
Ordering Guide
Type 168
Diaphragm Pressure Range (Select One)
2 to 40 psig (138 mbar to 2,8 bar)***
2 to 60 psig (138 mbar to 4,1 bar)***
Maximum Allowable Body Pressure (Select One)
40 psig (2,8 bar)***
150 psig (10,3 bar)***
Options (Select if Desired) Mounting bracket***
Control valve yoke mounting parts***
Manual reset switch***
Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match this order.
Type 68-2
Specify quantity
Type 168H
Diaphragm Pressure Range (Select One)
35 to 100 psig (2,4 to 6,9 bar)***
50 to 150 psig (3,4 to 10,3 bar)***
Maximum Allowable Body Pressure (Select One)
40 psig (2,8 bar)***
150 psig (10,3 bar)***
Options (Select if Desired)
Mounting bracket***
Control valve yoke mounting parts***
Manual reset switch***
Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match this order.
Specication Worksheet
Application:
Specic Use
Line Size
Fluid Type
Specic GravityTemperature
Does the Application Require Overpressure Protection?
Yes No
Pressure:
Maximum Inlet Pressure
Minimum Inlet Pressure
Differential Pressure
Set Pressure
Maximum Flow
Accuracy Requirements:
Less Than or Equal To:
5% 10% 20% 40%
Construction Material Requirements (if known):
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your local
Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your local
Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 48/104
289 Series Relief Valves/Backpressure Regulators
48
AIR P RODUCTS
Introduction
The 289 Series relief valve is a spring-loaded
throttling relief valve used downstream of
pressure regulators to protect the downstream
system from overpressure. A smooth throttling
action minimizes pressure surges in the system
during relief operation. The 289 Series relief
valves are ideal for low-pressure settings due
to the increased sensitivity provided by a large
diaphragm area. The 289 Series relief valves
are designed for pressure control; they are not
ASME safety relief valves.
Body Sizes and End Connection Styles
Inlet Connections
Type 289L: 3/4 or 1-inch threaded NPT
Types 289A and 289U: 1/4-inch threaded NPT
Type 289H: 1 or 2-inch threaded NPT
Type 289HH: 1-inch threaded NPT
Outlet (Vent) Connections
Same size as inlet connection
Maximum Allowable Relief
(Inlet) Pressures
See Table 2
Relief Set Pressure Ranges
5-inches w.c. to 75 psig (12 mbar to 5,2 bar)
in several ranges
See Table 2
Temperature Capabilities
With Nitrile (NBR) and Neoprene Elastomers:
-20° to 150°F (-29° to 66°C)
With Fluoroelastomers (FKM):
20° to 300°F (-7° to 149°C)
Available with Types 289H and 289HH only
Additional Technical Data
For more technical information, contact
your local Sales Ofce or log on to:
www.emersonprocess.com/regulators
Figure 1. 1-Inch Types 289H
and 289HH Relief Valve
Figure 2. Type 289L Relief Valve
Table 1. Construction Materials
TYPE VALVE BODY AND SPRING CASE DIAPHRAGM AND SEAT GASKETS SPRING
289A Zinc Neoprene Composition Zinc Plated Steel
289H
1-inch AluminumNitrile (NBR) or
Fluoroelastomer (FKM)Composition Zinc Plated Steel
2-inchCast Iron Body with
Aluminum Spring
289HH AluminumNitrile (NBR) or
Fluoroelastomer (FKM) Composition Zinc Plated Steel
289L Aluminum Nitrile (NBR) Neoprene Zinc Plated Steel
289U Zinc Nitrile (NBR) Composition Zinc Plated Steel
W18701
W1870_1L
Features
• High Flow Rates
• Small Size
• Reliability Due to Simplicity
• Tight Shutoff
• Throttling Type Relief
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 49/104
289 Series Relief Valves/Backpressure Regulators
49
AIR P RODUCTS
Table 2. Relief Set Pressure Ranges and Maximum Relief (Inlet) Pressures
BODY SIZES,
INCHESTYPE
SPRING RANGES
(RELIEF PRESSURE SETTINGS)
SPRING PART
NUMBER
MAXIMUM ALLOWABLE
RELIEF SETTING(1)
MAXIMUM ALLOWABLE
RELIEF (INLET)
PRESSURE(2)
1/4
289U5 to 25-inches w.c.
20-inches w.c. to 3 psig
(12 to 62 mbar)
(50 to 207 mbar)
0V060227022
0F0582270223 psig (0,21 bar) 10 psig (0,69 bar)
289A3 to 13 psig
11 to 22 psig
(207 mbar to 0,9 bar)
(0,8 to 1,5 bar)
0Z056327022
1B26822702222 psig (1,52 bar) 45 psig (3,10 bar)
3/4 or 1 289L
3 to 8-inches w.c.
5 to 18-inches w.c.
10 to 18-inches w.c.
12 to 40-inches w.c.
(7 to 20 mbar)
(12 to 45 mbar)
(25 to 45 mbar)
(30 to 99 mbar)
1B413527222
1N3112X0012
13A7917X012
13A7916X012
40-inches w.c. (99 mbar) 7 psig (0,48 bar)
1 289H
1 to 4.5 psig
4 to 15 psig
10 to 20 psig
15 to 50 psig
(69 mbar to 0,3 bar)
(276 mbar to 1,0 bar)
(0,7 to 1,4 bar)
(1,0 to 3,4 bar)
1F826927052
1D892327022
1D751527022
1D745527142
50 psig (3,45 bar) 100 psig (6,90 bar)
2 289H
7 to 18-inches w.c.
0.5 to 2.25 psig
1.75 to 7 psig
4 to 10 psig
(17 to 45 mbar)
(34 to 155 mbar)
(121 mbar to 0,5 bar)
(276 mbar to 0,7 bar)
1B536527052
1B536627052
1B536827062
1B536927052
10 psig (0,69 bar) 25 psig (1,72 bar)
1 289HH 45 to 75 psig (3,1 to 5,2 bar) 1D745527142 75 psig (5,17 bar) 100 psig (6,90 bar)
1. With highest spring range available.
2. Maximum relief pressure setting plus buildup.
If you don’t see what you’re looking for in this Application Guide . . . ask us about it.
Space in this Application Guide does not always permit us to list all of the options or products available to you. If you don’tsee the product you’re looking for, just pick up the phone and ask your local Sales Ofce to help you nd the item you need.
M1047
M1050
M1049
TYPE 289HTYPE 289A OR 289U TYPE 289L
Figure 3. 289 Series Operational Schematics
INLET PRESSURE
OUTLET PRESSURE
ATMOSPHERIC PRESSURE
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 50/104
289 Series Relief Valves/Backpressure Regulators
50
AIR P RODUCTS
0 7.75
(0,208)
15.5
(0,415)
23.3
(0,624)
31
(0,831)
38.8
(1,04)
46.5(1,25)
54.3
(1,46)
62
(1,66)
CAPACITIES IN THOUSANDS OF SCFH (Nm³/h) OF AIR
70
60
50
40
30
20
10
0
I N L E T P R E S
S U R E , P S I G
4,8
4,1
3,4
2,8
2,1
1,4
0,69
0
I N L E T P R E S S U R E , b a r
1,10
0,97
0,83
0,69
0,55
0,41
0,28
0,14
0
16
14
12
10
8
6
4
2
0
I N L E T P R E S S U R E , P S I G
I N L E T P R E S S U R E , b a r
0 3.1(0,083)
6.2(0,166)
9.3(0,249)
12.4(0,332)
15.5(0,415)
18.6(0,498)
21.7(0,582)
24.8(0,665)
27.9(0,748)
31(0,831)
34.1(0,914)
37.2(0,997)
40.3(1,08)
43.4(1,16)
46.5(1,25)
49.6(1,33)
CAPACITIES IN THOUSANDS OF SCFH (Nm³/h) OF AIR
NOTE:
1 LESS THAN A 5% CAPACITY LOSS CAN BE EXPECTED WITH THE VENT SCREEN INSTALLED ON THE 2-INCH TYPE 289H ATMAXIMUM FLOW.
2. WHEN SELECTING ANY RELIEF VALVE FOR INSTALLATION DOWNSTREAM OF THE REGULATOR, THE CAPACITY OF THE RELIEF VALVE
SHOULD BE COMPARED WITH THE WIDE-OPEN CAPACITY OF THE REGULATOR.3. BUBBLE POINT RELIEF SETTING AND SPRING PART NUMBER ARE NOTED ON EACH CURVE.
Figure 4. Type 289H Capacities
10 PSIG (0,69 bar) 1B536927052
7 PSIG (0,48 bar) 536827062
5 PSIG (0,35 bar) 1B536827062
2 PSIG (0,14 bar) 1B536627052
1 PSIG (0,069 bar) 1B536627052
0.5 PSIG (0,034 bar) 1B536527052
50 PSIG (3,4 bar) SETPOINT, 1D745527142
40 PSIG (2,8 bar) SETPOINT, 1D745527142
30 PSIG (2,1 bar) SETPOINT, 1D745527142
20 PSIG (1,4 bar) SETPOINT, 1D745527142
15 PSIG (1,03 bar) SETPOINT, 1D751527022
10 PSIG (0,69 bar) SETPOINT, 1D892327022
4 PSIG (0,28 bar) SETPOINT, 1F826927052
1 PSIG (0,069 bar) SETPOINT, 1F826927052
B2309
1
1-INCH TYPE 289H
VENT SCREEN INSTALLED
2-INCH TYPE 289H
NO VENT RESTRICTION
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 51/104
289 Series Relief Valves/Backpressure Regulators
51
AIR P RODUCTS
3/4-INCH SIZE 1 PSIG (0,069 bar) SETPOINT, 13A7916X012
3/4-INCH SIZE 0.5 PSIG (0,034 bar) SETPOINT, 13A7917X012
1-INCH SIZE 1 PSIG (0,069 bar) SETPOINT, 13A7916X012
1-INCH SIZE 0.5 PSIG (0,034 bar) SETPOINT, 13A7917X012
4
3
2
1
0
I N L
E T P R E S S U R E , P S I G
0,28
0,21
0,14
0,069
0
I N L E T P R E S S U R E , b a r
0 775
(20,8)
1550
(41,5)
2325
(62,3)
3100
(83,1)
3875
(104)
4650
(125)
5425
(145)
6200
(166)
6975
(187)
7750
(208)
CAPACITIES IN SCFH (Nm³/h) OF AIR
NOTE:
1. WHEN SELECTING ANY RELIEF VALVE FOR INSTALLATION DOWNSTREAM OF THE REGULATOR, THE CAPACITY OF THE RELIEF
VALVE SHOULD BE COMPARED WITH THE WIDE-OPEN CAPACITY OF THE REGULATOR.2. BUBBLE POINT RELIEF SETTING AND SPRING PART NUMBER ARE NOTED ON EACH CURVE.
Figure 5. Type 289L Capacities
75 PSIG (5,2 bar) SETPOINT
60 PSIG (4,1 bar) SETPOINT
50 PSIG (3,4 bar) SETPOINT
100
90
80
70
60
50
40
I N L E T P R E S S U R E , P S I G
6,9
6,2
5,5
4,8
4,1
3,4
2,8
I N L E T P R E S S U R E , b a r
0 7.75(0,208)
15.5(0,415)
23.3(0,624)
31(0,831)
38,8(1,04)
46.5
(1,25)
54.3(1,46)
62(1,66)
69.8(1,87)
77.5(2,08)
85.3(2,29)
93(2,49)
CAPACITIES IN THOUSANDS OF SCFH (Nm³/h) OF AIR
NOTE:
1. WHEN SELECTING ANY RELIEF VALVE FOR INSTALLATION DOWNSTREAM OF THE REGULATOR, THE CAPACITY OF THE RELIEF VALVESHOULD BE COMPARED WITH THE WIDE-OPEN CAPACITY OF THE REGULATOR.
2. BUBBLE POINT RELIEF SETTING AND SPRING PART NUMBER ARE NOTED ON EACH CURVE.
Figure 6. Type 289HH Capacities
B2311
B2310
3/4 AND 1-INCH TYPE 289L
VENT SCREEN INSTALLED
1-INCH TYPE 289HH
NO VENT RESTRICTIONSPRING 1D745527142
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 52/104
289 Series Relief Valves/Backpressure Regulators
52
AIR P RODUCTS
Table 4. Shipping Weights
TYPES BODY SIZES, INCHESAPPROXIMATE SHIPPING
WEIGHTS, POUNDS (kg)
289A and 289U 1/4 0.75 (0,34)
289H
1 4 (1,81)
2 15 (6,80)
289HH 1 4 (1,81)
289L 3/4 or 1 15 (6,80)
CAPACITIES IN SCFH (Nm3 /h) OF AIR
I N L E T P R E S S U R E — P S I G ( b a r )
77.5
(2,08)
1
(0,07)
4(0,28)
2
(0,14)
3
(0,21)
5
(0,35)
465
(12,5)
388
(10,4)
310
(8,31)
233
(6,24)
155
(4,15)
523
(14,0)
28(70)
138(343)
111
(276)
83
(206)
55(137)
I N L E T P R E S S U R E — I N C H E S W . C . ( m b a r )
3 PSIG (0,21 bar) SETPOINT, 0F0582270222 PSIG (0,14 bar) SETPOINT, 0F058227022
20-INCHES W.C. (50 mbar) SETPOINT, 0F058227022
24-INCHES W.C. (60 mbar) SETPOINT, 0V060227022
7-INCHES W.C. (17 mbar) SETPOINT, 0V0602270220
(0)
0
(0)
0
(0)
Figure 7. Type 289U Capacities
B2311
TYPES 289A AND 289U
1/4-INCH
3.06D
(77,7)
0.38(9,65)
2.25
(57,2)
1/4-18 NPT
TYPE 289L
3/4 AND 1-INCH
4.88
(124)
1.94(49,3)
1.25
(31,8)
5.38
(137)
TYPES 289H AND 289HH1-INCH
1.78
(45,2)
8.69
(221)
1.88
(47,8)
0.38(9,65)
4.12(105)
TYPE 289H2-INCH
3.56(90,4)
8.94(227)
7.12
(181)
2.12(53,8)
INCHES
(mm)
Figure 8. Dimensions
11B6509_B AL5113_B
AF8621_F AU2493_B A1393_2
Table 3. IEC Sizing Coefcients
BODY SIZES,
INCHESX
TF
DF
LK
m
1/4 0.775
0.50 0.89 0.793/4 0.775
1 0.648
2 0.616
TYPE 289U
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 53/104
289 Series Relief Valves/Backpressure Regulators
53
AIR P RODUCTS
Relief Set Pressure Range (Select One) (continued)
Type 289HH, 1-inch
45 to 75 psig (3,1 to 5,2 bar)***
Type 289U, 1/4-inch
5 to 25-inches w.c. (12 to 62 mbar)***
20-inches w.c. to 3 psig (50 to 207 mbar)***
Ordering Guide
Size and Body Material (Select One)
Type 289A
1/4-inch NPT, Zinc***
Type 289H
1-inch NPT, Aluminum***
2-inch NPT, Cast iron with aluminum spring case***
Type 289HH
1-inch NPT, Aluminum***
Type 289L
3/4-inch NPT, Aluminum***
1-inch NPT, Aluminum***
Type 289U
1/4-inch NPT, Zinc***
Relief Set Pressure Range (Select One)
Type 289A, 1/4-inch
3 to 13 psig (207 mbar to 0,9 bar)***
11 to 22 psig (0,8 to 1,5 bar)***
Type 289L, 3/4 or 1-inch
3 to 8-inches w.c. (7 to 20 mbar)***
5 to 18-inches w.c. (12 to 45 mbar)***
10 to 18-inches w.c. (25 to 45 mbar)***
12 to 40-inches w.c. (30 to 99 mbar)***
Type 289H, 1-inch
1 to 4.5 psig (69 mbar to 0,3 bar)***
4 to 15 psig (276 mbar to 1,0 bar)***
10 to 20 psig (0,7 to 1,4 bar)***
15 to 50 psig (1,0 to 3,4 bar)***
Type 289H, 2-inch
7 to 18-inches w.c. (17 to 45 mbar)***
0.5 to 2.25 psig (34 to 155 mbar)*** 1.75 to 7 psig (121 mbar to 0,5 bar)***
4 to 10 psig (276 mbar to 0,7 bar)***
- continued -
Diaphragm Material (Select One)
Type 289A
Neoprene***
Type 289H
Nitrile (NBR)***
Fluoroelastomer (FKM)***
Type 289HH
Nitrile (NBR)***
Fluoroelastomer (FKM)***
Type 289L
Nitrile (NBR)***
Type 289U
Nitrile (NBR)***
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 54/104
289 Series Relief Valves/Backpressure Regulators
54
AIR P RODUCTS
Ordering Guide (continued)
Specication Worksheet
Application:
Specic Use
Line Size
Fluid Type
Specic GravityTemperature
Does the Application Require Overpressure Protection?
Yes No
Pressure:
Maximum Inlet Pressure
Minimum Inlet Pressure
Differential Pressure
Set Pressure
Maximum Flow
Accuracy Requirements:
Less Than or Equal To:
5% 10% 20% 40%
Construction Material Requirements (if known):
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your local
Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your local
Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
Seat Material (Select One)
Type 289H
Nitrile (NBR)***
Fluoroelastomer (FKM)***
Type 289HH
Nitrile (NBR)***
Fluoroelastomer (FKM)***
Type 289L Nitrile (NBR)***
Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match this order.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 55/104
627 Series Pressure Reducing Regulators
55
AIR P RODUCTS
Introduction
The 627 Series direct-operated pressure
reducing regulators are for low and high
pressure systems. These regulators are used to
take the rst-stage pressure cut for many general
pressure reduction applications.
Body Sizes and End Connection Styles
See Table 2
Flow Coefficients
See Table 4
IEC Sizing Coefficients
See Table 5
• Internal Relief Valve
• Types 627R and 627MR Travel Stop
• Relief Operation Indicator
• Easy to Maintain
• Installation Adaptability
• Application Versatility• Tamper Resistant
• Wide Range of Flow Capabilities
• Tight Shutoff Capability
Temperature Capabilities
See Table 6
Maximum Inlet Pressure (Body Rating)
NPT Steel: 2000 psig (138 bar)
Flanged Steel: 1500 psig (103 bar)
Ductile Iron: 1000 psig (69 bar)
See Table 8
Maximum Outlet (Casing) Pressure
See Table 9
Outlet Pressure Ranges5 to 500 psig (0,3 to 34,5 bar)
in 6 ranges
See Table 10
Internal Relief Performance
Type 627R: See Table 20
Type 627MR: Limited by eld-installed
control line piping
Pressure Registration
See Table 1
Additional Technical Data
For more technical information, contact
your local Sales Ofce or log on to:
www.emersonprocess.com/regulators
Figure 1. Type 627 Direct-Operated
Pressure Reducing Regulator
W6309
Figure 2. Type 627 Operational Schematic
Table 1. Available Construction
TYPE CONFIGURATIONS
627Type 627 with internal registration, equipped with a pitot tube for
greater regulated capacities.
627R Type 627 with internal relief, internal registration, and an open throat.
627M Type 627 with external pressure registration.
627HType 627 with internal registration and a diaphragm limiter to deliver
a higher outlet pressure.
627MR Type 627M with interna l re lief and externa l registrati on.
627HMType 627M with external registration and a diaphragm limiter to deliver
higher outlet pressure.
627LBype 627 with longer body. All other congurations are available in the
LB version with NPT end connections.
Table 2. Body Sizes and End Connection Styles
BODY SIZE,
INCHES (DN)
BODY MATERIAL
Ductile Iron Steel or Stainless Steel
3/4 NPT NPT
1 or 2 (25 or 50) NPTNPT, CL150 RF, CL300 RF,
CL600 R or N 16/25/40 anged
A6557
INLET PRESSURE
OUTLET PRESSURE
ATMOSPHERIC PRESSURE
Features
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 56/104
627 Series Pressure Reducing Regulators
56
AIR P RODUCTS
Table 3. Construction Materials
BODYSPRING CASE AND
DIAPHRAGM CASEORIFICE VALVE DISK
VALVE DISK
HOLDER
LEVER
ASSEMBLYO-RINGS DIAPHRAGM
Ductile Iron, Steel, or
CF8M Stainless steel
Ductile iron,
Aluminum, Steel,
or CF8M Stainless steel
303 or 316 Stainless
steel or Aluminum
Nylon, Nitrile (NBR), or
Fluoroelastomer (FKM)
Aluminum or
Stainless steel
Steel or 304L
Stainless
steel
Nitrile (NBR) or
Fluoroelastomer
(FKM)
Nitrile (NBR),
Fluoroelastomer
(FKM), or Neoprene
Table 4. Flow Coefcients for Relief Sizing
ORIFICE SIZE,
INCHES (mm)
3/4-INCH BODY 1-INCH (DN 25) BODY 2-INCH (DN 50) BODYK
m
Wide-open Cg Wide-open Cv C1 Wide-open Cg Wide-open Cv C1 Wide-open Cg Wide-open Cv C1
3/32 (2,4) 6.9 0.24 29.2 6.9 0.24 28.5 6.9 0.23 29.7 0.72
1/8 (3,2) 12.5 0.43 29.1 12.5 0.43 29.4 12.5 0.42 29.5 0.62
3/16 (4,8) 29 1.01 28.6 29 0.93 31.2 29 1.02 28.5 0.72
1/4 (6,4) 50 1.63 30.6 50 1.71 29.3 52 1.66 31.3 0.76
3/8 (9,5) 108 2.99 36.1 108 3.42 31.6 115 3.39 33.9 0.79
1/2 (12,7) 190 4.87 39.0 190 5.29 35.9 200 5.01 39.9 0.74
Table 6. Temperature Capabilities(1)
MATERIAL PART TEMPERATURE RANGE
Nitrile (NBR)Disk
Diaphragm
-40° to 180°F (-40° to 82°C)
-40° to 180°F (-40° to 82°C)
Fluoroelastomer (FKM)Disk
Diaphragm
0° to 300°F (-18° to 149°C)
0° to 300°F (-18° to 149°C)
Nylon Disk -40° to 200°F (-40° to 93°C)
Neoprene Diaphragm -40° to 180°F (-40° to 82°C)
1. The temperature limits in this Application Guide or any applicable standard limitation
should not be exceeded.
Table 7. Maximum Valve Disk Inlet Pressure(1)
DISK MATERIAL MAXIMUM INLET PRESSURE
Nitrile (NBR) 1000 psig (69,0 bar)
Nylon 2000 psig (138 bar)
Fluoroelastomer (FKM) 200 psig (13,8 bar)
1. The pressure limits in this Application Guide or any applicable standard
limitation should not be exceeded.
Table 5. IEC Sizing Coefcients
ORIFICE SIZE,
INCH (mm)
XT
FD
FL
3/4-inch (DN 20) Body 1-inch (DN 25) Body 2-inch (DN 50) Body
3/32 (2,4) 0.54 0.51 0.56
0.50
0.85
1/8 (3,2) 0.54 0.55 0.54 0.79
3/16 (4,8) 0.52 0.62 0.51 0.85
1/4 (6,4) 0.59 0.54 0.62 0.87
3/8 (9,5) 0.82 0.63 0.73 0.89
1/2 (12,7) 0.96 0.82 1.0 0.86
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 57/104
627 Series Pressure Reducing Regulators
57
AIR P RODUCTS
Table 9. Maximum Spring and Diaphragm Casing Pressure(1)
MAXIMUM PRESSURE DESCRIPTIONSPRING AND DIAPHRAGM
CASING STYLE
TYPE 627,
PSIG (bar)
TYPE 627R,
PSIG (bar)
TYPE 627M,
PSIG (bar)
TYPE 627MR,
PSIG (bar)
TYPES 627H
AND 627HM,
PSIG (bar)
Maximum pressure to spring and diaphragm casings to prevent
leak to atmosphere other than relief action
(internal parts damage may occur)
Die cast aluminum 250 (17,2) 250 (17,2) Not Available Not Available Not Available
Ductile iron 250 (17,2) 250 (17,2) 250 (17,2) Not Available Not Available
Steel 250 (17,2) 250 (17,2) 250 (17,2) 250 (17,2) 800 (55,2)
Maximum pressure to spring and diaphragm casings to prevent
burst of casings during abnormal operation (leak to atmosphere
and internal parts damage may occur)
Die cast aluminum 375 (25,9) 375 (25,9) Not Available Not Available Not Available
Ductile iron 465 (32) 465 (32) 465 (32) 465 (32) Not Available
Steel 1500 (103) 1500 (103) 1500 (103) 1500 (103) 1500 (103)
Maximum diaphragm casing overpressure (above setpoint) to
prevent damage to internal parts All styles 60 (4,1) 120 (8,3) 60 (4,1) 120 (8,3) 120 (8,3)
1. If the spring case is pressurized, a metal adjusting screw cap is required. Contact your local Sales Ofce.
Table 8. Maximum Cold Working Pressure of Body Inlet (Body Rating)(1)(2)
BODY SIZE, INCHES (DN) BODY MATERIAL END CONNECTION MAXIMUM INLET PRESSURE, PSIG (bar)
3/4Ductile iron
Steel and Stainless steel NPT
1 or 2 (25 or 50)
Ductile iron NPT 1000 (69,0)
Steel
NPT
CL150 RF
CL300 RF
CL600 RF
PN 16/25/40 RF
2000
290
750
1500
580
(138)
(20,0)
(51,7)
(103)
(40,0)
Stainless steel
NPT
CL150 RF
CL300 RF
CL600 RF
PN 16/25/40 RF
2000
275
720
1440
580
(138)
(19,0)
(49,6)
(99,3)
(40,0)
1. The pressure/temperature limits in this Application Guide, and any applicable standard or code should not be exceeded.
2. Temperature may decrease these maximum pressures.
Figure 3. Spring Case and Vent Location
A3726
SPRING CASE VENT LOCATION POSITION 1(STANDARD)
POSITION 2 POSITION 3 POSITION 4
C
D (STANDARD)F
SPRING CASE VENT LOCATION BODY-SPRING CASE ORIENTATION
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 58/104
627 Series Pressure Reducing Regulators
58
AIR P RODUCTS
Table 10. Maximum Inlet Pressures, Differential Pressures, and Outlet Pressure Ranges
TYPES
OUTLET PRESSURE RANGE,
SPRING PART NUMBER,
AND COLOR
ORIFICE SIZE,
INCHES (mm)
MAXIMUM INLET PRESSURE,
PSIG (bar)
MAXIMUM DIFFERENTIAL
PRESSURE, PSID (bar d)
627
and627M(3)
5(2) to 20 psig
(0,3 to 1,4 bar)
10B3076X012
Yellow
3/32
1/8
3/16
1/4
3/8
1/2
(2,4)
(3,2)
(4,8)
(6,4)
(9,5)
(12,7)
2000
1000
750
500
300
250
(138)(1)
(69,0)(1)
(51,7)
(34,5)
(20,7)
(17,2)
2000
1000
750
500
300
250
(138)(1)
(69,0)(1)
(51,7)
(34,5)
(20,7)
(17,2)
15 to 40 psig
(1,0 to 2,8 bar)
10B3077X012
Green
3/32
1/8
3/16
1/4
3/8
1/2
(2,4)
(3,2)
(4,8)
(6,4)
(9,5)
(12,7)
2000
1500
1000
750
500
300
(138)(1)
(103)(1)
(69,0)(1)
(51,7)
(34,5)
(20,7)
2000
1500
1000
750
500
300
(138)(1)
(103)(1)
(69,0)(1)
(51,7)
(34,5)
(20,7)
35 to 80 psig
(2,4 to 5,5 bar)
10B3078X012
Blue
3/32
1/8
3/16
1/4
3/8
1/2
(2,4)
(3,2)
(4,8)
(6,4)
(9,5)
(12,7)
2000
2000
1750
1500
1000
750
(138)(1)
(138)(1)
(121)(1)
(103)(1)
(69,0)(1)
(51,7)
2000
2000
1750
1500
1000
750
(138)(1)
(138)(1)
(121)(1)
(103)(1)
(69,0)(1)
(51,7)
70 to 150 psig
(4,8 to 10,3 bar)
10B3079X012
Red
3/32
1/8
3/16
1/4
3/8
1/2
(2,4)
(3,2)
(4,8)
(6,4)
(9,5)
(12,7)
2000
2000
2000
1750
1250
750
(138)(1)
(138)(1)
(138)(1)
(121)(1)
(86,2)(1)
(51,7)
2000
2000
2000
1750
1250
750
(138)(1)
(138)(1)
(138)(1)
(121)(1)
(86,2)(1)
(51,7)
627R
and
627MR
5(2) to 20 psig
(0,3 to 1,4 bar)
10B3076X012
Yellow
3/32
1/8
3/16
1/4
3/8
1/2
(2,4)
(3,2)
(4,8)
(6,4)
(9,5)
(12,7)
2000
1000
750
500
300
200
(138)(1)
(69,0)(1)
(51,7)
(34,5)
(20,7)
(13,8)
2000
1000
750
500
300
200
(138)(1)
(69,0)(1)
(51,7)
(34,5)
(20,7)
(13,8)
15 to 40 psig
(1,0 to 2,8 bar)
10B3077X012
Green
3/321/8
3/16
1/4
3/8
1/2
(2,4)(3,2)
(4,8)
(6,4)
(9,5)
(12,7)
20001500
1000
750
300
200
(138)(1)
(103)(1)
(69,0)(1)
(51,7)
(20,7)
(13,8)
20001500
1000
750
300
200
(138)(1)
(103)(1)
(69,0)(1)
(51,7)
(20,7)
(13,8)
35 to 80 psig
(2,4 to 5,5 bar)
10B3078X012
Blue
3/32
1/8
3/16
1/4
3/8
1/2
(2,4)
(3,2)
(4,8)
(6,4)
(9,5)
(12,7)
2000
1750
1000
750
300
200
(138)(1)
(121)(1)
(69,0)(1)
(51,7)
(20,7)
(13,8)
2000
1750
1000
750
300
200
(138)(1)
(121)(1)
(69,0)(1)
(51,7)
(20,7)
(13,8)
70 to 150 psig
(4,8 to 10,3 bar)
10B3079X012
Red
3/32
1/8
3/16
1/4
3/8
1/2
(2,4)
(3,2)
(4,8)
(6,4)
(9,5)
(12,7)
2000
1000
500
300
200
200
(138)(1)
(69,0)(1)
(34,5)
(20,7)
(13,8)
(13,8)
2000
1000
500
300
200
200
(138)(1)
(69,0)(1)
(34,5)
(20,7)
(13,8)
(13,8)
627H
and
627MH(3)
140 to 250 psig(9,7 to 17,2 bar)
10B3078X012
Blue
3/32
1/8
3/16
1/4
3/8
1/2
(2,4)
(3,2)
(4,8)
(6,4)
(9,5)
(12,7)
2000
2000
1750
1500
1000
750
(138)(1)
(138)(1)
(121)(1)
(103)(1)
(69,0)(1)
(51,7)
2000
2000
1750
1000
500
250
(138)(1)
(138)(1)
(121)(1)
(69,0)(1)
(34,5)
(17,2)
240 to 500 psig
(16,5 to 34,5 bar)
10B3079X012
Red
3/32
1/8
3/16
1/4
3/8
1/2
(2,4)
(3,2)
(4,8)
(6,4)
(9,5)
(12,7)
2000
2000
1750
1500
1000
750
(138)(1)
(138)(1)
(121)(1)
(103)(1)
(69,0)(1)
(51,7)
2000
2000
1750
1000
500
250
(138)(1)
(138)(1)
(121)(1)
(69,0)(1)
(34,5)
(17,2)
1. or inlet pressure in excess of 1000 psig �69,0 bar, refer to the maximum body and disk pressure ratings in the Specications.
2. For pressure settings under 10 psig (0,7 bar), inlet pressure should be limited to approximately 100 psig (6,9 bar) so the setpoint adjustment can be obtained.
3. he unbalanced forces change from the wide-open monitor mode to an active regulator mode such that the ype 627M or 627MH should have a 3/8-inch �9,5 mm or larger orice
when used as a wide-open monitor.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 59/104
627 Series Pressure Reducing Regulators
59
AIR P RODUCTS
Table 11. Types 627, 627M, and 627MR Capacities for 3/4-inch Body Based on 20% Droop
OUTLET PRESSURE
RANGE, SPRING
PART NUMBER,
AND COLOR
OUTLET
PRESSURE
SETTING,
PSIG (bar)
INLET
PRESSURE,
PSIG (bar)
CAPACITIES IN SCFH (Nm3 /h) OF AIR
Orice Size, Inches (mm)
3/32 (2,4) 1/8 (3,2) 3/16 (4,8) 1/4 (6,4) 3/8 (9,5) 1/2 (12,7)
5 to 20 psig(1)
(0,3 to 1,4 bar)
10B3076X012
Yellow
10 (0,7)
20
60
100
200
500
(1,4)
(4,1)
(6,9)
(13,8)
(34,5)
217
496
767
1434
3108
(5,82)
(13,3)
(20,6)
(38,4)
(83,3)
353
907
1395
2612
6270
(9,46)
(24,3)
(37,4)
(70,0)
(168)
876
1976
2945
5402
6247
(23,5)
(53,0)
(78,9)
(145)
(167)
1387
3286
4635
5619
6278
(37,2)
(88,1)
(124)
(151)
(168)
2325
4859
5766
6355
(62,3)
(130)
(155)
(170)
3333
5712
6123
6433
(89,3)
(153)
(164)
(172)
750
1000
1250
1500
1750
2000
(51,7)
(69,0)
(86,2)
(103)
(121)
(138)
3410
3449
3519
3782
4053
4573
(91,4)
(92,4)
(94,3)
(101)
(109)
(123)
6921
7983
(185)
(214)
6936 (186)
20 (1,4)
30
60
100
200
500
(2,1)
(4,1)
(6,9)
(13,8)
(34,5)
271
496
767
1434
3410
(7,26)
(13,3)
(20,6)
(38,4)
(91,4)
481
907
1395
2612
6270
(12,9)
(24,3)
(37,4)
(70,0)
(168)
1085
2046
3085
5689
14 183
(29,1)
(54,8)
(82,7)
(152)
(380)
1930
3627
5596
9300
11 703
(51,7)
(97,2)
(150)
(249)
(314)
3379
6464
8913
10 230
(90,6)
(173)
(239)
(274)
4875
6929
9765
10 618
(131)
(186)
(262)
(285)
750
1000
1250
1500
1750
2000
(51,7)
(69,0)
(86,2)
(103)
(121)
(138)
5115
5658
5813
6045
6510
6665
(137)
(152)
(156)
(162)
(174)
(179)
9300
11 315
(249)
(303)
11 005 (295)
15 to 40 psig
(1,0 to 2,8 bar)
10B3077X012
Green
40 (2,8)
60
100
200
500
750
(4,1)
(6,9)
(13,8)
(34,5)
(51,7)
473
767
1434
3410
5115
(12,7)
(20,6)
(38,4)
(91,4)
(137)
845
1387
2612
6270
9300
(22,6)
(37,2)
(70,0)
(168)
(249)
1961
3154
5913
14 183
17 825
(52,6)
(84,5)
(158)
(380)
(478)
3371
5596
10 463
18 600
18 755
(90,3)
(150)
(280)
(498)
(503)
6309
10 230
13 950
20 925
(169)
(274)
(374)
(561)
7301
11 858
14 338
(196)
(318)
(384)
1000
1250
1500
1750
2000
(69,0)
(86,2)
(103)
(121)
(138)
6743
8525
9300
10 075
10 850
(181)
(228)
(249)
(270)
(291)
12 400
13 950
16 275
(332)
(374)
(436)
18 910 (507)
60 (4,1)
75
100
200
500
750
(5,2)
(6,9)
(13,8)
(34,5)
(51,8)
543
752
1434
3410
5115
(14,6)
(20,2)
(38,4)
(91,4)
(137)
953
1349
2612
6270
9300
(25,5)
(36,2)
(70,0)
(168)
(249)
2139
3108
5913
14 186
20 383
(57,3)
(83,3)
(158)
(380)
(546)
3681
5417
10 463
21 778
23 250
(98,7)
(145)
(280)
(584)
(623)
6681
9920
16 740
22 398
28 675
(179)
(266)
(449)
(600)
(768)
11 780
13 408
21 235
25 885
34 875
(316)
(359)
(569)
(694)
(935)
1000
1250
1500
1750
2000
(69,0)
(86,2)
(103)
(121)
(138)
6743
8525
10 075
11 625
13 175
(181)
(228)
(270)
(312)
(353)
12 400
14 725
17 050
19 375
21 700
(332)
(395)
(457)
(519)
(582)
23 250
24 490
23 560
26 350
(623)
(656)
(631)
(706)
24 180
26 350
27 900
(648)
(706)
(748)
28 985 (777)
80 (5,5)
100
200
500
750
(6,9)
(13,8)
(34,5)
(51,8)
698
1434
3410
5115
(18,7)
(38,4)
(91,4)
(137)
1240
2612
6270
9300
(33,2)
(70,0)
(168)
(249)
2906
5913
14 183
21 080
(77,9)
(158)
(380)
(565)
5030
10 463
24 723
27 125
(135)
(280)
(663)
(727)
9455
19 685
27 900
34 100
(253)
(528)
(748)
(914)
13 408
22 708
28 443
35 650
(359)
(609)
(762)
(955)
1000
12501500
1750
2000
(69,0)
(86,2)(103)
(121)
(138)
6743
852510 075
11 625
13 175
(181)
(228)(270)
(132)
(353)
12 400
14 72517 050
19 375
21 700
(332)
(395)(457)
(519)
(582)
27 978
28 67529 450
32 550
(750)
(768)(789)
(872)
29 450
31 00034 100
(789)
(831)(914)
43 555 (1167)
70 to 150 psig
(4,8 to 10,3 bar)
10B3079X012
Red
100 (6,9)
200
500
750
1000
(13,8)
(34,5)
(51,8)
(69,0)
1434
3410
5115
6743
(38,4)
(91,4)
(137)
(181)
2612
6270
9300
12 400
(70,0)
(168)
(249)
(332)
5913
14 183
21 080
27 978
(158)
(380)
(565)
(750)
9300
24 645
30 225
31 000
(249)
(660)
(810)
(831)
16 508
30 225
30 380
31 388
(442)
(810)
(814)
(841)
19 918
30 380
35 573
(534)
(814)
(953)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
8525
10 075
11 625
13 175
(228)
(270)
(312)
(353)
14 725
17 050
19 375
21 700
(395)
(457)
(519)
(582)
30 225
33 325
34 875
35 650
(810)
(893)
(935)
(955)
31 388
34 100
36 425
(841)
(914)
(976)
31 775 (852)
150 (10,3)
200
500
750
1000
(13,8)
(34,5)
(51,8)
(69,0)
1364
3410
5115
6743
(36,3)
(91,4)
(137)
(181)
2480
6270
9300
12 400
(66,5)
(168)
(249)
(332)
5650
14 183
21 080
27 978
(151)
(380)
(565)
(750)
9688
25 188
37 433
49 678
(260)
(675)
(1003)
(1331)
16 585
37 898
45 725
62 853
(444)
(1016)
(1225)
(1684)
23 715
46 268
55 800
65 875
(636)
(1240)
(1495)
(1765)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
8525
10 075
11 625
13 175
(228)
(270)
(312)
(353)
14 725
17 050
19 375
21 700
(395)
(457)
(519)
(582)
34 875
41 850
48 825
55 025
(935)
(1122)
(1309)
(1475)
52 700
55 800
59 675
(1412)
(1495)
(1599)
69 750 (1869)
1. For pressure settings under 10 psig (0,69 bar), inlet pressure should be limited to approximately 100 psig (6,90 bar) so the setpoint adjustment can be obtained.
- Blank areas indicate where maximum operating inlet pressure for a given orice is exceeded.
- Shaded areas indicate where a Type 627MR regulator should not be used because unbalanced forces can cause the internal relief valve to start to discharge during
normal operation.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 60/104
627 Series Pressure Reducing Regulators
60
AIR P RODUCTS
Table 12. Types 627, 627M, and 627MR Capacities for 1-inch Body (DN 25) Based on 20% Droop
OUTLET PRESSURE
RANGE, SPRING
PART NUMBER,
AND COLOR
OUTLET
PRESSURE
SETTING,
PSIG (bar)
INLET
PRESSURE,
PSIG (bar)
CAPACITIES IN SCFH (Nm3 /h) OF AIR
Orice Size, Inches (mm)
3/32 (2,4) 1/8 (3,2) 3/16 (4,8) 1/4 (6,4) 3/8 (9,5) 1/2 (12,7)
10 (0,7)
20
60
100
200
500
(1,4)
(4,1)
(6,9)
(13,8)
(34,5)
217
496
767
1434
3410
(5,82)
(13,3)
(20,6)
(38,4)
(91,4)
380
907
1395
2612
6270
(10,2)
(24,3)
(37,4)
(70,0)
(168)
891
2015
3154
5913
12 168
(23,9)
(54,0)
(84,5)
(158)
(326)
1589
3650
5665
10 618
15 500
(42,6)
(97,8)
(152)
(285)
(415)
2620
6309
9688
13 950
(70,2)
(169)
(260)
(374)
3418
10 618
12 400
14 338
(91,6)
(285)
(332)
(384)
750
1000
1250
1500
1750
2000
(51,7)
(69,0)
(86,2)
(103)
(121)
(138)
4185
4495
4883
5115
5270
5890
(112)
(120)
(131)
(137)
(141)
(158)
9300
10 850
(249)
(291)
13 950 (374)
20 (1,4)
30
60
100
200
500
(2,1)
(4,1)
(6,9)
(13,8)
(34,5)
271
496
767
1434
3410
(7,26)
(13,3)
(20,6)
(38,4)
(91,4)
481
907
1395
2612
6270
(12,9)
(24,3)
(37,4)
(70,0)
(168)
1124
2046
3154
5913
14 183
(30,1)
(54,8)
(84,5)
(158)
(380)
2000
3681
5665
10 618
25 498
(53,6)
(98,7)
(152)
(285)
(683)
3379
7510
10 773
20 615
(90,6)
(201)
(289)
(552)
4875
11 238
18 058
30 303
(131)
(301)
(484)
(812)
750
1000
1250
1500
1750
2000
(51,7)
(69,0)
(86,2)
(103)
(121)
(138)
5115
6898
7750
8060
9300
10 850
(137)
(185)
(208)
(216)
(249)
(291)
9300
12 400
(249)
(332)
18 290 (490)
15 to 40 psig
(1,0 to 2,8 bar)
10B3077X012
Green
40 (2,8)
60
100
200
500
750
(4,1)
(6,9)
(13,8)
(34,5)
(51,7)
473
767
1434
3410
5115
(12,7)
(20,6)
(38,4)
(91,4)
(137)
845
1387
2612
6270
9300
(22,6)
(37,2)
(70,0)
(168)
(249)
1961
3154
5913
14 183
21 080
(52,6)
(84,5)
(158)
(380)
(565)
3495
5665
10 618
25 498
30 535
(93,7)
(152)
(285)
(683)
(818)
7200
11 393
21 003
49 523
(193)
(305)
(563)
(1327)
7301
16 973
35 960
(196)
(455)
(964)
1000
1250
15001750
2000
(69,0)
(86,2)
(103)(121)
(138)
6743
8525
10 07511 625
13 175
(181)
(228)
(270)(312)
(353)
12 400
14 725
17 050
(332)
(395)
(457)
27 978 (750)
60 (4,1)
100
200
500
750
(6,9)
(13,8)
(34,5)
(51,8)
752
1434
3410
5115
(20,2)
(38,4)
(91,4)
(137)
1349
2612
6270
9300
(36,2)
(70,0)
(168)
(249)
3108
5913
14 183
21 080
(83,3)
(158)
(380)
(565)
5425
10 618
25 498
33 620
(145)
(285)
(683)
(901)
10 075
18 600
49 600
51 150
(270)
(498)
(1329)
(1371)
14 958
32 705
73 083
100 750
(401)
(876)
(1959)
(2700)
1000
1250
1500
1750
2000
(69,0)
(86,2)
(103)
(121)
(138)
6743
8525
10 075
11 625
13 175
(181)
(228)
(270)
(312)
(353)
12 400
14 725
17 050
19 375
21 700
(332)
(395)
(457)
(519)
(582)
27 978
34 875
41 850
48 825
(750)
(935)
(1122)
(1309)
38 983
44 175
48 825
(1045)
(1184)
(1309)
52 468 (1406)
80 (5,5)
100
200
500
750
(6,9)
(13,8)
(34,5)
(51,8)
698
1434
3410
5115
(18,7)
(38,4)
(91,4)
(137)
1240
2612
6270
9300
(33,2)
(70,0)
(168)
(249)
2906
5913
14 183
21 080
(77,9)
(158)
(380)
(565)
5154
10 618
25 498
37 898
(138)
(285)
(683)
(1016)
9455
22 010
55 490
81 763
(253)
(590)
(1487)
(2191)
14 415
34 178
85 250
104 625
(386)
(916)
(2285)
(2804)
1000
1250
15001750
2000
(69,0)
(86,2)
(103)(121)
(138)
6743
8525
10 07511 625
13 175
(181)
(228)
(270)(312)
(353)
12 400
14 725
17 05019 375
21 700
(332)
(395)
(457)(519)
(582)
27 978
34 875
41 850
48 825
(750)
(935)
(1122)
(1309)
50 298
62 000
74 400
(1348)
(1662)
(1994)
91 450 (2451)
70 to 150 psig
(4,8 to 10,3 bar)
10B3079X012
Red
100 (6,9)
200
500
750
1000
(13,8)
(34,5)
(51,8)
(69,0)
1434
3410
5115
6743
(38,4)
(91,4)
(137)
(181)
2612
6270
9300
12 400
(70,0)
(168)
(249)
(332)
5913
14 183
21 080
27 978
(158)
(380)
(565)
(750)
9300
24 645
36 658
46 268
(249)
(660)
(982)
(1240)
16 508
51 538
73 858
77 500
(442)
(1381)
(1979)
(2077)
26 428
65 023
90 675
(708)
(1743)
(2430)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
8525
10 075
11 625
13 175
(228)
(270)
(312)
(353)
14 725
17 050
19 375
21 700
(395)
(457)
(519)
(582)
34 875
41 850
48 825
55 025
(935)
(1122)
(1309)
(1475)
55 800
66 650
73 625
(1495)
(1786)
(1973)
88 350 (2368)
150 (10,3)
200
500
750
1000
(13,8)
(34,5)
(51,8)
(69,0)
1364
3410
5115
6743
(36,6)
(91,4)
(137)
(181)
2480
6270
9300
12 400
(66,5)
(168)
(249)
(332)
5650
14 183
21 080
27 978
(151)
(380)
(565)
(750)
9998
25 498
37 898
50 220
(268)
(683)
(1016)
(1346)
16 585
54 483
80 600
106 950
(444)
(1460)
(2160)
(2866)
26 040
86 025
124 000
125 550
(698)
(2305)
(3323)
(3365)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
8525
10 075
11 625
13 175
(228)
(270)
(312)
(353)
14 725
17 050
19 375
21 700
(395)
(457)
(519)
(582)
34 875
41 850
48 825
55 025
(935)
(1122)
(1309)
(1475)
62 000
74 400
86 800
(1662)
(1994)
(2326)
116 250 (3116)
1. For pressure settings under 10 psig (0,69 bar), inlet pressure should be limited to approximately 100 psig (6,90 bar) so the setpoint adjustment can be obtained.
- Blank areas indicate where maximum operating inlet pressure for a given orice is exceeded.
- Shaded areas indicate where a Type 627MR regulator should not be used because unbalanced forces can cause the internal relief valve to start to discharge during
normal operation.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 61/104
627 Series Pressure Reducing Regulators
61
AIR P RODUCTS
Table 13. Type 627 Capacities for 2-inch (DN 50) Body Based on 20% Droop
OUTLET PRESSURE
RANGE, SPRING
PART NUMBER,
AND COLOR
OUTLET
PRESSURE
SETTING,
PSIG (bar)
INLET
PRESSURE,
PSIG (bar)
CAPACITIES IN SCFH (Nm3 /h) OF AIR
Orice Size, Inches (mm)
3/32 (2,4) 1/8 (3,2) 3/16 (4,8) 1/4 (6,4) 3/8 (9,5) 1/2 (12,7)
5 to 20 psig(1)
(0,3 to 1,4 bar)
10B3076X012Yellow
10 (0,7)
20
60
100
200
500
(1,4)
(4,1)
(6,9)
(13,8)
(34,5)
217
496
767
1434
3410
(5,82)
(13,3)
(20,6)
(38,4)
(91,4)
380
907
1387
2612
6270
(10,2)
(24,3)
(37,2)
(70,0)
(168)
891
2015
3154
5913
14 183
(23,9)
(54,0)
(84,5)
(158)
(380)
1457
3681
5665
10 618
16 275
(39,0)
(98,7)
(152)
(285)
(436)
2023
5619
12 555
17 593
(54,2)
(151)
(336)
(471)
2968
13 795
22 243
18 600
(79,5)
(370)
(596)
(498)
750
1000
1250
1500
1750
2000
(51,7)
(69,0)
(86,2)
(103)
(121)
(138)
5115
6743
8525
10 075
11 625
4883
(137)
(181)
(228)
(270)
(312)
(131)
9300
12 400
(249)
(332)
21 080 (565)
20 (1,4)
3060
100
200
500
(2,1)(4,1)
(6,9)
(13,8)
(34,5)
271496
767
1434
3410
(7,26)(13,3)
(20,6)
(38,4)
(91,4)
481907
1395
2612
6270
(12,9)(24,3)
(37,4)
(70,0)
(168)
11242046
3154
5913
14 183
(30,1)(54,8)
(84,5)
(158)
(380)
18213681
5665
10 618
25 498
(48,8)(98,7)
(152)
(285)
(683)
33336510
12 555
18 600
(89,3)(174)
(336)
(498)
473512 168
22 243
25 575
(127)(326)
(596)
(685)
750
1000
1250
1500
1750
2000
(51,7)
(69,0)
(86,2)
(103)
(121)
(138)
5115
6743
8525
10 075
11 625
4883
(137)
(181)
(228)
(270)
(312)
(131)
9300
12 400
(249)
(332)
21 080 (565)
15 to 40 psig
(1,0 to 2,8 bar)
10B3077X012
Green
40 (2,8)
60
100
200
500
750
(4,1)
(6,9)
(13,8)
(34,5)
(51,7)
473
767
1434
3410
5115
(12,7)
(20,6)
(38,4)
(91,4)
(137)
845
1395
2612
6270
9300
(22,6)
(37,4)
(70,0)
(168)
(249)
1961
3154
5913
14 183
21 080
(52,6)
(84,5)
(158)
(380)
(565)
3387
5665
10 618
25 498
21 700
(90,8)
(152)
(285)
(683)
(582)
6727
12 555
23 560
17 050
(180)
(336)
(631)
(457)
10 308
19 685
41 773
(276)
(528)
(1120)
1000
1250
1500
1750
2000
(69,0)
(86,2)
(103)
(121)
(138)
6743
8525
10 075
11 625
13 175
(181)
(228)
(270)
(312)
(353)
12 400
14 725
17 050
(332)
(395)
(457)
27 978 (750)
35 to 80 psig
(2,4 to 5,5 bar)
10B3078X012
Blue
60 (4,1)
150
200
500
750
(10,3)
(13,8)
(34,5)
(51,8)
1101
1434
3410
5115
(29,5)
(38,4)
(91,4)
(137)
2000
2612
6270
9300
(53,6)
(70,0)
(168)
(249)
4534
5913
14 183
21 080
(122)
(158)
(380)
(565)
8138
10 618
25 498
37 898
(218)
(285)
(683)
(1016)
18 058
23 560
56 575
41 075
(484)
(631)
(1516)
(1101)
27 280
41 773
30 070
24 800
(731)
(1120)
(806)
(665)
1000
1250
1500
1750
2000
(69,0)
(86,2)
(103)
(121)
(138)
6743
8525
10 075
11 625
13 175
(181)
(228)
(270)
(312)
(353)
12 400
14 725
17 050
19 375
21 700
(332)
(395)
(457)
(519)
(582)
27 978
34 875
41 850
20 150
(750)
(935)
(1122)
(540)
33 325
54 250
33 325
(893)
(1454)
(893)
40 300 (1080)
80 (5,5)
100
200
500
750
(6,9)
(13,8)
(34,5)
(51,8)
698
1434
3410
5115
(18,7)
(38,4)
(91,4)
(137)
1263
2612
6270
9300
(33,8)
(70,0)
(168)
(249)
2906
5913
14 183
21 080
(77,9)
(158)
(380)
(565)
4960
10 618
25 498
37 898
(133)
(285)
(683)
(1016)
9920
23 560
56 575
67 425
(266)
(631)
(1516)
(1807)
15 810
41 773
37 200
34 100
(424)
(1120)
(997)
(914)
1000
1250
1500
1750
2000
(69,0)
(86,2)
(103)
(121)
(138)
6743
8525
10 075
11 625
13 175
(181)
(228)
(270)
(312)
(353)
12 400
14 725
17 050
19 375
21 700
(332)
(395)
(457)
(519)
(582)
27 978
34 875
41 850
48 825
(750)
(935)
(1122)
(1309)
50 375
48 825
66 650
(1350)
(1309)
(1786)
48 825 (1309)
70 to 150 psig
(4,8 to 10,3 bar)
10B3079X012
Red
100 (6,9)
200
500
750
1000
(13,8)
(34,5)
(51,8)
(69,0)
1434
3410
5115
6743
(38,4)
(91,4)
(137)
(181)
2612
6270
9300
12 400
(70,0)
(168)
(249)
(332)
5913
14 183
21 080
27 978
(158)
(380)
(565)
(750)
10 618
25 498
37 898
50 220
(285)
(683)
(1016)
(1346)
17 050
56 575
83 700
63 550
(457)
(1516)
(2243)
(1703)
25 575
99 975
41 850
(685)
(2679)
(1122)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
8525
10 075
11 625
13 175
(228)
(270)
(312)
(353)
14 725
17 050
19 375
21 700
(395)
(457)
(519)
(582)
34 875
41 850
48 825
55 025
(935)
(1122)
(1309)
(1475)
62 000
74 400
86 800
(1662)
(1994)
(2326)
85 250 (2285)
150 (10,3)
200
500
750
1000
(13,8)
(34,5)
(51,8)
(69,0)
1364
3410
5115
6743
(36,6)
(91,4)
(137)
(181)
2480
6270
9300
12 400
(66,5)
(168)
(249)
(332)
5650
14 183
21 080
27 978
(151)
(380)
(565)
(750)
10 075
25 498
37 898
50 220
(270)
(683)
(1016)
(1346)
18 600
56 575
83 700
111 600
(498)
(1516)
(2243)
(2991)
29 450
99 975
48 050
(789)
(2679)
(1288)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
8525
10 075
11 625
13 175
(228)
(270)
(312)
(353)
14 725
17 050
19 375
21 700
(395)
(457)
(519)
(582)
34 875
41 850
48 825
55 025
(935)
(1122)
(1309)
(1475)
62 000
74 400
86 800
(1662)
(1994)
(2326)
62 775 (1682)
1. For pressure settings under 10 psig (0,69 bar), inlet pressure should be limited to approximately 100 psig (6,90 bar) so the setpoint adjustment can be obtained.
- Blank areas indicate where maximum operating inlet pressure for a given orice is exceeded.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 62/104
627 Series Pressure Reducing Regulators
62
AIR P RODUCTS
Table 14. Types 627M and 627MR Capacities for 2-inch (DN 50) Body Based on 20% Droop
OUTLET PRESSURE
RANGE, SPRING
PART NUMBER,
AND COLOR
OUTLET
PRESSURE
SETTING,
PSIG (bar)
INLET
PRESSURE,
PSIG (bar)
CAPACITIES IN SCFH (Nm3 /h) OF AIR
Orice Size, Inches (mm)
3/32 (2,4) 1/8 (3,2) 3/16 (4,8) 1/4 (6,4) 3/8 (9,5) 1/2 (12,7)
5 to 20 psig(1)
(0,3 to 1,4 bar)
10B3076X012
Yellow
10 (0,7)
20
60
100
200
500
(1,4)
(4,1)
(6,9)
(13,8)
(34,5)
217
496
767
1434
3410
(5,82)
(13,3)
(20,6)
(38,4)
(91,4)
380
907
1387
2612
6270
(10,2)
(24,3)
(37,2)
(70,0)
(168)
891
2015
3154
5913
14 183
(23,9)
(54,0)
(84,5)
(158)
(380)
1457
3681
5665
10 618
25 498
(39,0)
(98,7)
(152)
(285)
(683)
2023
5619
11 315
21 158
(54,2)
(151)
(303)
(567)
2968
11 625
17 825
33 325
(79,5)
(312)
(478)
(893)
750
1000
1250
1500
17502000
(51,7)
(69,0)
(86,2)
(103)
(121)(138)
5115
6743
8525
10 075
11 62513 175
(137)
(181)
(228)
(270)
(312)(353)
9300
12 400
(249)
(332)
21 080 (565)
20 (1,4)
30
60
100
200
500
(2,1)
(4,1)
(6,9)
(13,8)
(34,5)
271
496
767
1434
3410
(7,26)
(13,3)
(20,6)
(38,4)
(91,4)
481
907
1395
2612
6270
(12,9)
(24,3)
(37,4)
(70,0)
(168)
1124
2046
3154
5913
14 183
(30,1)
(54,8)
(84,5)
(158)
(380)
1922
3681
5665
10 618
25 498
(51,5)
(98,7)
(152)
(285)
(683)
3333
6510
11 315
21 158
(89,3)
(174)
(303)
(567)
4735
11 625
17 825
33 325
(127)
(312)
(478)
(893)
750
1000
1250
1500
1750
2000
(51,7)
(69,0)
(86,2)
(103)
(121)
(138)
5115
6743
8525
10 075
11 625
13 175
(137)
(181)
(228)
(270)
(312)
(353)
9300
12 400
(249)
(332)
21 080 (565)
15 to 40 psig
(1,0 to 2,8 bar)
10B3077X012
Green
40 (2,8)
60
100
200
500
750
(4,1)
(6,9)
(13,8)
(34,5)
(51,7)
473
767
1434
3410
5115
(12,7)
(20,6)
(38,4)
(91,4)
(137)
845
1395
2612
6270
9300
(22,6)
(37,4)
(70,0)
(168)
(249)
1961
3154
5913
14 183
21 080
(52,6)
(84,5)
(158)
(380)
(565)
3387
5665
10 618
25 498
37 898
(90,8)
(152)
(285)
(683)
(1016)
6727
11 315
21 158
50 375
(180)
(303)
(567)
(1350)
10 308
19 685
37 200
(276)
(528)
(997)
1000
12501500
1750
2000
(69,0)
(86,2)(103)
(121)
(138)
6743
852510 075
11 625
13 175
(181)
(228)(270)
(312)
(353)
12 400
14 72517 050
(332)
(395)(457)
27 978 (750)
35 to 80 psig
(2,4 to 5,5 bar)
10B3078X012
Blue
60 (4,1)
100
200
500
750
(6,9)
(13,8)
(34,5)
(51,8)
752
1434
3410
5115
(20,2)
(38,4)
(91,4)
(137)
1349
2612
6270
9300
(36,2)
(70,0)
(168)
(249)
3108
5913
14 183
21 080
(83,3)
(158)
(380)
(565)
5425
10 618
25 498
37 898
(145)
(285)
(683)
(1016)
11 625
23 560
56 575
83 700
(312)
(631)
(1516)
(2243)
15 810
37 588
89 900
133 300
(424)
(1007)
(2409)
(3572)
1000
1250
1500
1750
2000
(69,0)
(86,2)
(103)
(121)
(138)
6743
8525
10 075
11 625
13 175
(181)
(228)
(270)
(312)
(353)
12 400
14 725
17 050
19 375
21 700
(332)
(395)
(457)
(519)
(582)
27 978
34 875
41 850
48 825
(750)
(935)
(1122)
(1309)
50 375
62 775
75 175
(1350)
(1682)
(2015)
111 600 (2991)
80 (5,5)
100
200
500
750
(6,9)
(13,8)
(34,5)
(51,8)
698
1434
3410
5115
(18,7)
(38,4)
(91,4)
(137)
1263
2612
6270
9300
(33,8)
(70,0)
(168)
(249)
2906
5913
14 183
21 080
(77,9)
(158)
(380)
(565)
4960
10 618
25 498
37 898
(133)
(285)
(683)
(1016)
9920
23 560
56 575
83 700
(266)
(631)
(1516)
(2243)
15 810
37 588
89 900
133 300
(424)
(1007)
(2409)
(3572)
1000
1250
15001750
2000
(69,0)
(86,2)
(103)(121)
(138)
6743
8525
10 07511 625
13 175
(181)
(228)
(270)(312)
(353)
12 400
14 725
17 05019 375
21 700
(332)
(395)
(457)(519)
(582)
27 978
34 875
41 85048 825
(750)
(935)
(1122)(1309)
50 375
62 775
75 175
(1350)
(1682)
(2015)
111 600 (2991)
70 to 150 psig
(4,8 to 10,3 bar)
10B3079X012
Red
100 (6,9)
200
500
750
1000
(13,8)
(34,5)
(51,8)
(69,0)
1434
3410
5115
6743
(38,4)
(91,4)
(137)
(181)
2612
6270
9300
12 400
(70,0)
(168)
(249)
(332)
5913
14 183
21 080
27 978
(158)
(380)
(565)
(750)
10 618
25 498
37 898
50 220
(285)
(683)
(1016)
(1346)
17 050
56 575
83 700
111 600
(457)
(1516)
(2243)
(2991)
25 575
89 900
133 300
(685)
(2409)
(3572)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
8525
10 075
11 625
13 175
(228)
(270)
(312)
(353)
14 725
17 050
19 375
21 700
(395)
(457)
(519)
(582)
34 875
41 850
48 825
55 025
(935)
(1122)
(1309)
(1475)
62 000
74 400
86 800
(1662)
(1994)
(2326)
138 725 (3718)
150 (10,3)
200
500
750
1000
(13,8)
(34,5)
(51,8)
(69,0)
1364
3410
5115
6743
(36,6)
(91,4)
(137)
(181)
2480
6270
9300
12 400
(66,5)
(168)
(249)
(332)
5650
14 183
21 080
27 978
(151)
(380)
(565)
(750)
10 075
25 498
37 898
50 220
(270)
(683)
(1016)
(1346)
18 600
56 575
83 700
111 600
(498)
(1516)
(2243)
(2991)
29 450
89 900
133 300
(789)
(2409)
(3572)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
8525
10 075
11 625
13 175
(228)
(270)
(312)
(353)
14 725
17 050
19 375
21 700
(395)
(457)
(519)
(582)
34 875
41 850
48 825
55 025
(935)
(1122)
(1309)
(1475)
62 000
74 400
86 800
(1662)
(1994)
(2326)
138 725 (3718)
1. For pressure settings under 10 psig (0,69 bar), inlet pressure should be limited to approximately 100 psig (6,90 bar) so the setpoint adjustment can be obtained.
- Blank areas indicate where maximum operating inlet pressure for a given orice is exceeded.
- Shaded areas indicate where a Type 627MR regulator should not be used because unbalanced forces can cause the internal relief valve to start to discharge during
normal operation.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 63/104
627 Series Pressure Reducing Regulators
63
AIR P RODUCTS
Table 15. Types 627H and 627HM Capacities for 3/4-inch Body Based on 20% Droop
OUTLET PRESSURE
RANGE, SPRING
PART NUMBER,
AND COLOR
OUTLET
PRESSURE
SETTING,
PSIG (bar)
INLET
PRESSURE,
PSIG (bar)
CAPACITIES IN SCFH (Nm3 /h) OF AIR
Orice Size, Inches (mm)
3/32 (2,4) 1/8 (3,2) 3/16 (4,8) 1/4 (6,4) 3/8 (9,5) 1/2 (12,7)
140 to 250 psig
(9,7 to 17,2 bar)
10B3078X012
Blue
150 (10,3)
200
250
300
400
500
750
(13,8)
(17,2)
(20,7)
(27,6)
(34,5)
(51,7)
1364
1752
2093
2790
3410
5115
(36,6)(1)
(47,0)(1)
(56,1)
(74,8)
(91,4)
(137)
2480
3178
3805
5038
6270
9300
(66,5)(1)
(85,2)(1)
(102)
(135)
(168)
(249)
5650
7130
8680
11 470
14 183
21 080
(151)
(191)
(233)
(307)
(380)
(565)
8913
11 935
14 958
19 143
23 018
33 325
(239)
(320)
(401)
(513)
(617)
(893)
16 740
22 165
24 025
31 000
39 525
(449)
(594)
(644)
(831)
(1059)
24 025
31 000
35 650
38 750
(644)
(831)
(955)
(1039)
1000
1250
15001750
2000
(69,0)
(86,2)
(103)(121)
(138)
6743
8525
10 07511 625
13 175
(181)
(228)
(270)(312)
(353)
12 400
14 725
17 05019 375
21 700
(332)
(395)
(457)(519)
(582)
27 978
34 875
41 85048 825
(750)
(935)
(1122)(1309)
44 175 (1184)
200 (13,8)
250
300
400
500
750
(17,2)
(20,7)
(27,6)
(34,5)
(51,7)
1674
2093
2790
3410
5115
(44,9)(1)
(56,1)(1)
(74,8)
(91,4)
(137)
2984
3805
5038
6270
9300
(80,0)(1)
(102)(1)
(135)
(168)
(249)
6510
8680
11 470
14 183
21 080
(174)
(233)
(307)
(380)
(565)
11 625
15 113
19 763
24 025
35 263
(312)
(405)
(530)
(644)
(945)
24 025
27 900
40 300
47 275
(644)
(748)
(1080)
(1267)
31 775
40 300
52 700
(852)
(1080)
(1412)
1000
1250
1500
1750
2000
(69,0)
(86,2)
(103)
(121)
(138)
6743
8525
10 075
11 625
13 175
(181)
(228)
(270)
(312)
(353)
12 400
14 725
17 050
19 375
21 700
(332)
(395)
(457)
(519)
(582)
27 978
34 875
41 850
48 825
(750)
(935)
(1122)
(1309)
46 500 (1246)
250 (17,2)
300
400
500
750
1000
(20,7)
(27,6)
(34,5)
(51,7)
(69,0)
1938
2790
3410
5115
6743
(51,9)(1)
(74,8)(1)
(91,4)
(137)
(181)
3488
4960
6270
9300
12 400
(93,5)(1)
(133)(1)
(168)
(249)
(332)
7673
11 083
14 183
21 080
27 978
(206)
(297)
(380)
(565)
(750)
14 338
20 150
25 575
37 975
50 375
(384)
(540)
(685)
(1018)
(1350)
28 675
42 625
49 600
72 075
(768)
(1142)
(1329)
(1932)
40 300
57 350
67 425
(1080)
(1537)
(1807)
12501500
1750
2000
(86,2)(103)
(121)
(138)
852510 075
11 625
13 175
(228)(270)
(312)
(353)
14 72517 050
19 375
21 700
(395)(457)
(519)
(582)
34 87541 850
48 825
55 025
(935)(1122)
(1309)
(1475)
62 775
(1682)
240 to 500 psig
(16,5 to 34,5 bar)
10B3079X012
Red
250 (17,2)
300
400
500
750
1000
(20,7)
(27,6)
(34,5)
(51,7)
(69,0)
1938
2790
3410
5115
6743
(51,9)(1)
(74,8)(1)
(91,4)
(137)
(181)
3488
4960
6270
9300
12 400
(93,5)(1)
(133)(1)
(168)
(249)
(332)
7208
11 083
14 183
21 080
27 978
(193)
(297)
(380)
(565)
(750)
10 850
16 585
20 383
28 753
36 735
(291)
(444)
(546)
(771)
(984)
19 375
27 900
32 550
44 175
(519)
(748)
(872)
(1184)
28 675
37 975
48 050
(768)
(1018)
(1288)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
8525
10 075
11 625
13 175
(228)
(270)
(312)
(353)
14 725
17 050
19 375
21 700
(395)
(457)
(519)
(582)
34 875
41 850
48 825
55 025
(935)
(1122)
(1309)
(1475)
44 175
(1184)
500 (34,5)
550
600
750
1000
(37,9)
(41,4)
(51,7)
(69,0)
3333
3798
5115
6743
(89,3)(1)
(102)(1)
(137)
(181)
5968
6820
9300
12 400
(160)(1)
(183)(1)
(249)
(332)
13 020
15 035
21 080
27 978
(349)
(403)
(565)
(750)
25 575
28 675
37 975
50 375
(685)
(768)
(1018)
(1350)
48 050
54 250
68 200
100 750
(1288)
(1454)
(1828)
(2700)
69 750
80 600
106 175
(1869)
(2160)
(2845)
1250
15001750
2000
(86,2)
(103)(121)
(138)
8525
10 07511 625
13 175
(228)
(270)(312)
(353)
14 725
17 05019 375
21 700
(395)
(457)(519)
(582)
34 875
41 85048 825
55 025
(935)
(1122)(1309)
(1475)
62 775
75 175
(1682)
(2015)
1. Small orices and low-pressure drops might cause the setpoint to shift ±15 psig �±1,03 bar.
- Blank areas indicate where maximum operating inlet pressure for a given orice is exceeded.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 64/104
627 Series Pressure Reducing Regulators
64
AIR P RODUCTS
Table 16. Types 627H and 627HM Capacities for 1-inch (DN 25) Body Based on 20% Droop
OUTLET PRESSURE
RANGE, SPRING
PART NUMBER,
AND COLOR
OUTLET
PRESSURE
SETTING,
PSIG (bar)
INLET
PRESSURE,
PSIG (bar)
CAPACITIES IN SCFH (Nm3 /h) OF AIR
Orice Size, Inches (mm)
3/32 (2,4) 1/8 (3,2) 3/16 (4,8) 1/4 (6,4) 3/8 (9,5) 1/2 (12,7)
140 to 250 psig
(9,7 to 17,2 bar)
10B3078X012
Blue
150 (10,3)
200
250
300
400
500
750
(13,8)
(17,2)
(20,7)
(27,6)
(34,5)
(51,7)
1364
1752
2093
2790
3410
5115
(36,6)(1)
(47,0)(1)
(56,1)
(74,8)
(91,4)
(137)
2480
3178
3805
5038
6270
9300
(66,5)(1)
(85,2)(1)
(102)
(135)
(168)
(249)
5650
7130
8680
11 470
14 183
21 080
(151)
(191)
(233)
(307)
(380)
(565)
8913
11 935
14 958
19 375
24 800
35 650
(239)
(320)
(401)
(519)
(665)
(955)
16 740
22 165
24 025
31 000
39 525
(449)
(594)
(644)
(831)
(1059)
24 025
31 000
35 650
38 750
(644)
(831)
(955)
(1039)
1000
1250
15001750
2000
(69,0)
(86,2)
(103)(121)
(138)
6743
8525
10 07511 625
13 175
(181)
(228)
(270)(312)
(353)
12 400
14 725
17 05019 375
21 700
(332)
(395)
(457)(519)
(582)
27 978
34 875
41 85048 825
(750)
(935)
(1122)(1309)
44 175
(1184)
250 (17,2)
300
400
500
750
1000
(20,7)
(27,6)
(34,5)
(51,7)
(69,0)
1938
2790
3410
5115
6743
(51,9)(1)
(74,8)(1)
(91,4)
(137)
(181)
3488
4960
6270
9300
12 400
(93,5)(1)
(133)(1)
(168)
(249)
(332)
7673
11 083
14 183
21 080
27 978
(206)
(297)
(380)
(565)
(750)
14 338
20 150
25 575
37 975
50 375
(384)
(540)
(685)
(1018)
(1350)
28 675
42 625
49 600
72 075
(768)
(1142)
(1329)
(1932)
58 125
57 350
67 425
(1558)
(1537)
(1807)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
8525
10 075
11 625
13 175
(228)
(270)
(312)
(353)
14 725
17 050
19 375
21 700
(395)
(457)
(519)
(582)
34 875
41 850
48 825
55 025
(935)
(1122)
(1309)
(1475)
62 775
(1682)
240 to 500 psig
(16,5 to 34,5 bar)
10B3079X012
Red
250 (17,2)
300
500
750
1000
(20,7)
(34,5)
(51,7)
(69,0)
1938
3410
5115
6743
(51,9)(1)
(91,4)
(137)
(181)
3488
6270
9300
12 400
(93,5)(1)
(168)
(249)
(332)
7208
14 183
21 080
27 978
(193)
(380)
(565)
(750)
10 850
20 383
28 753
36 735
(291)
(546)
(771)
(984)
19 375
32 550
44 175
(519)
(872)
(1184)
28 675
48 050
(768)
(1288)
1250
1500
17502000
(86,2)
(103)
(121)(138)
8525
10 075
11 62513 175
(228)
(270)
(312)(353)
14 725
17 050
19 37521 700
(395)
(457)
(519)(582)
34 875
41 850
48 82555 025
(935)
(1122)
(1309)(1475)
44 175 (1184)
500 (34,5)
550
750
1000
(37,9)
(51,7)
(69,0)
333
5115
6743
(8,92)(1)
(137)
(181)
5968
9300
12 400
(160)(1)
(249)
(332)
13 020
21 080
27 978
(349)
(565)
(750)
25 575
37 975
50 375
(685)
(1018)
(1350)
48 050
68 200
100 750
(1288)
(1828)
(2700)
69 750
108 500
(1869)
(2908)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
8525
10 075
11 625
13 175
(228)
(270)
(312)
(353)
14 725
17 050
19 375
21 700
(395)
(457)
(519)
(582)
34 875
41 850
48 825
55 025
(935)
(1122)
(1309)
(1475)
62 775
75 175
(1682)
(2015)
1. Small orices and low-pressure drops might cause the setpoint to shift ±15 psig �±1,03 bar.
- Blank areas indicate where maximum operating inlet pressure for a given orice is exceeded.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 65/104
627 Series Pressure Reducing Regulators
65
AIR P RODUCTS
Table 17. Types 627H and 627HM Capacities for 2-inch (DN 50) Body Based on 20% Droop
OUTLET PRESSURE
RANGE, SPRING
PART NUMBER,
AND COLOR
OUTLET
PRESSURE
SETTING,
PSIG (bar)
INLET
PRESSURE,
PSIG (bar)
CAPACITIES IN SCFH (Nm3 /h) OF AIR
Orice Size, Inches (mm)
3/32 (2,4) 1/8 (3,2) 3/16 (4,8) 1/4 (6,4) 3/8 (9,5) 1/2 (12,7)
140 to 250 psig
(9,7 to 17,2 bar)
10B3078X012
Blue
150 (10,3)
200
400
500
750
(13,8)
(27,6)
(34,5)
(51,7)
1364
2790
3410
5115
(36,6)(1)
(74,8)
(91,4)
(137)
2480
5038
6270
9300
(66,5)(1)
(135)
(168)
(249)
5650 11
470 14
183 21
080
(151)
(307)
(380)
(565)
10 618
19 375
24 800
37 200
(285)
(519)
(665)
(997)
18 678
31 000
(501)
(831)
24 025
38 750
(644)
(1039)
1000
1250
1500
1750
2000
(69,0)
(86,2)
(103)
(121)
(138)
6743
8525
10 075
11 625
13 175
(181)
(228)
(270)
(312)
(353)
12 400
14 725
17 050
19 375
21 700
(332)
(395)
(457)
(519)
(582)
27 978
34 875
41 850
48 825
(750)
(935)
(1122)
(1309)
50 375
(1350)
250 (17,2)
300
400
500
750
(20,7)
(27,6)
(34,5)
(51,7)
1938
2790
3410
5115
(51,9)(1)
(74,8)(1)
(91,4)
(137)
3488
4960
6270
9300
(93,5)(1)
(133)(1)
(168)
(249)
7673
11 083
14 183
21 080
(206)
(297)
(380)
(565)
14 338
20 150
25 575
37 975
(384)
(540)
(685)
(1018)
28 675
42 625
49 600
79 050
(768)
(1142)
(1329)
(2119)
58 125
62 775
73 625
(1558)
(1682)
(1973)
1000
1250
1500
1750
2000
(69,0)
(86,2)
(103)
(121)
(138)
6743
8525
10 075
11 625
13 175
(181)
(228)
(270)
(312)
(353)
12 400
14 725
17 050
19 375
21 700
(332)
(395)
(457)
(519)
(582)
27 978
34 875
41 850
48 825
55 025
(750)
(935)
(1122)
(1309)
(1475)
50 375
62 775
(1350)
(1682)
240 to 500 psig
(16,5 to 34,5 bar)
10B3079X012
Red
250 (17,2)
300
500
750
1000
(20,7)
(34,5)
(51,7)
(69,0)
1938
3410
5115
6743
(51,9)(1)
(91,4)
(137)
(181)
3488
6270
9300
12 400
(93,5)(1)
(168)
(249)
(332)
7208
14 183
21 080
27 978
(193)
(380)
(565)
(750)
10 850
20 383
28 753
36 735
(291)
(546)
(771)
(984)
19 375
32 550
44 175
(519)
(872)
(1184)
28 675
48 050
(768)
(1288)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
8525
10 075
11 625
13 175
(228)
(270)
(312)
(353)
14 725
17 050
19 375
21 700
(395)
(457)
(519)
(582)
34 875
41 850
48 825
55 025
(935)
(1122)
(1309)
(1475)
44 175 (1184)
300 (20,7)
350
500
750
1000
(24,1)
(34,5)
(51,7)
(69,0)
2248
3410
5115
6743
(60,2)(1)
(91,4)
(137)
(181)
3991
6270
9300
12 400
(107)(1)
(168)
(249)
(332)
8758
14 183
21 080
27 978
(235)
(380)
(565)
(750)
14 260
24 800
37 200
48 050
(382)
(665)
(997)
(1288)
24 025
41 075
62 000
(644)
(1101)
(1662)
34 875
51 925
(935)
(1392)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
8525
10 075
11 625
13 175
(228)
(270)
(312)
(353)
14 725
17 050
19 375
21 700
(395)
(457)
(519)
(582)
34 875
41 850
48 825
55 025
(935)
(1122)
(1309)
(1475)
61 225 (1641)
400 (27,6)
450
500
750
1000
(31,0)
(34,5)
(51,7)
(69,0)
2790
3410
5115
6743
(74,8)(1)
(91,4)(1)
(137)
(181)
4960
6270
9300
12 400
(133)(1)
(168)(1)
(249)
(332)
10 850
14 183
21 080
27 978
(291)
(380)
(565)
(750)
19 375
24 800
37 975
50 375
(519)
(665)
(1018)
(1350)
36 425
41 850
70 525
(976)
(1122)
(1890)
51 925
59 675
(1392)
(1599)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
8525
10 075
11 625
13 175
(228)
(270)
(312)
(353)
14 725
17 050
19 375
21 700
(395)
(457)
(519)
(582)
34 875
41 850
48 825
55 025
(935)
(1122)
(1309)
(1475)
62 775 (1682)
500 (34,5)
550
600750
1000
(37,9)
(41,4)(51,7)
(69,0)
3333
37985115
6743
(89,3)(1)
(102)(1)
(137)
(181)
5968
68209300
12 400
(160)(1)
(183)(1)
(249)
(332)
13 020
15 03521 080
27 978
(349)
(403)(565)
(750)
25 575
28 67537 975
50 375
(685)
(768)(1018)
(1350)
48 050
54 25068 200
100 750
(1288)
(1454)(1828)
(2700)
69 750
80 600108 500
(1869)
(2160)(2908)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
8525
10 075
11 625
13 175
(228)
(270)
(312)
(353)
14 725
17 050
19 375
21 700
(395)
(457)
(519)
(582)
34 875
41 850
48 825
55 025
(935)
(1122)
(1309)
(1475)
62 775
75 175
(1682)
(2015)
1. Small orices and low-pressure drops might cause the setpoint to shift ±15 psig �±1,03 bar.
- Blank areas indicate where maximum operating inlet pressure for a given orice is exceeded.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 66/104
627 Series Pressure Reducing Regulators
66
AIR P RODUCTS
Table 18. Type 627R Capacities for 3/4-inch Body Based on 20% Droop
OUTLET PRESSURE
RANGE, SPRING
PART NUMBER,
AND COLOR
OUTLET
PRESSURE
SETTING,
PSIG (bar)
INLET
PRESSURE,
PSIG (bar)
CAPACITIES IN SCFH (Nm3 /h) OF AIR
Orice Size, Inches (mm)
3/32 (2,4) 1/8 (3,2) 3/16 (4,8) 1/4 (6,4) 3/8 (9,5) 1/2 (12,7)
5 to 20 psig(1)
(0,3 to 1,4 bar)
10B3076X012
Yellow
10 (0,7)
20
60
(1,4)
(4,1)
217
496
(5,82)
(13,3)
349
907
(9,35)
(24,3)
829
1907
(22,2)
(51,1)
1349
2860
(36,2)
(76,6)
2093
4084
(56,1)
(109)
2945
4743
(78,9)
(127)
100
200
500
(6,9)
(13,8)
(34,5)
767
1434
3108
(20,6)
(38,4)
(83,3)
1310
2379
3286
(35,1)
(63,8)
(88,1)
2744
3255
4371
(73,5)
(87,2)
(117)
3712
4805
5053
(99,5)
(129)
(135)
4805
4945
(129)
(133)
5890
5952
(158)
(160)
750
1000
1250
1500
17502000
(51,7)
(69,0)
(86,2)
(103)
(121)(138)
3410
3449
3519
3782
40534573
(91,4)
(92,4)
(94,3)
(101)
(109)(123)
3968
4821
(106)
(129)
4960 (133)
20 (1,4)
30
60
100
(2,1)
(4,1)
(6,9)
271
496
767
(7,26)
(13,3)
(20,6)
457
907
1395
(12,2)
(24,3)
(37,4)
1077
2023
3085
(28,9)
(54,2)
(82,7)
1922
3627
5193
(51,5)
(97,2)
(139)
3371
6045
7556
(90,3)
(162)
(203)
3852
6898
8060
(103)
(185)
(216)
200
500
750
1000
(13,8)
(34,5)
(51,7)
(69,0)
1434
3410
5115
5658
(38,4)
(91,4)
(137)
(152)
2612
4030
4154
5038
(70,0)
(108)
(111)
(135)
5464
5735
6874
(146)
(154)
(184)
6975
7564
(187)
(203)
7905
(212) 8370 (224)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
5813
6045
6510
6665
(156)
(162)
(174)
(179)
15 to 40 psig
(1,0 to 2,8 bar)
10B3077X012
Green
40 (2,8)
60
100
200
500
(4,1)
(6,9)
(13,8)
(34,5)
473
767
1434
3410
(12,7)
(20,6)
(38,4)
(91,4)
845
1387
2612
6270
(22,6)
(37,2)
(70,0)
(168)
1759
3154
5913
11 238
(47,1)
(84,5)
(158)
(301)
3278
5301
8525
11 470
(87,9)
(142)
(228)
(307)
6278
9223
12 633
(168)
(247)
(339)
7053
10 385
13 253
(189)
(278)
(355)
750
1000
12501500
1750
2000
(51,7)
(69,0)
(86,2)(103)
(121)
(138)
5115
6743
85259300
10 075
10 850
(137)
(181)
(228)(249)
(270)
(291)
8370
10 153
10 69510 850
(224)
(272)
(287)(291)
11 470
12 633
(307)
(339)
11 548 (309)
35 to 80 psig
(2,4 to 5,5 bar)
10B3078X012
Blue
60 (4,1)
75
100
200
500
(5,2)
(6,9)
(13,8)
(34,5)
543
752
1434
3410
(14,6)
(20,2)
(38,4)
(91,4)
953
1349
2612
6270
(25,5)
(36,2)
(70,0)
(168)
2139
3030
5913
14 183
(57,3)
(81,2)
(158)
(380)
3643
5185
9610
15 500
(97,6)
(139)
(258)
(415)
6332
9223
14 260
(170)
(247)
(382)
9765
11 160
16 430
(262)
(299)
(440)
750
1000
1250
1500
1750
2000
(51,7)
(69,0)
(86,2)
(103)
(121)
(138)
5115
6743
8525
10 075
11 625
13 175
(137)
(181)
(228)
(270)
(312)
(353)
9300
12 400
14 493
14 725
15 500
(249)
(332)
(388)
(395)
(415)
14 648
14 725
(393)
(395)
16 585 (444)
80 (5,5)
100
200
500
(6,9)
(13,8)
(34,5)
698
1434
3410
(18,7)
(38,4)
(91,4)
1263
2612
6270
(33,8)
(70,0)
(168)
2767
5913
14 183
(74,2)
(158)
(380)
5030
10 618
22 475
(135)
(285)
(602)
9300
17 825
(249)
(478)
13 330
22 475
(357)
(602)
750
1000
12501500
1750
2000
(51,7)
(69,0)
(86,2)(103)
(121)
(138)
5115
6743
852510 075
11 625
13 175
(137)
(181)
(228)(270)
(312)
(353)
9300
12 400
14 72517 050
19 375
(249)
(332)
(395)(457)
(519)
17 903
21 235
(480)
(569)
23 948
(642)
70 to 150 psig
(4,8 to 10,3 bar)
10B3079X012
Red
100 (6,9)
150
200
500
750
(10,3)
(13,8)
(34,5)
(51,7)
907
1434
3410
5115
(24,3)
(38,4)
(91,4)
(137)
1945
2612
6270
9300
(52,1)
(70,0)
(168)
(249)
4294
5913
14 183
(115)
(158)
(380)
6440
9300
(173)
(249)
12 013
15 578
(322)
(417)
15 733
19 918
(422)
(534)
1000
1250
1500
1750
2000
(69,0)
(86,2)
(103)
(121)
(138)
6743
8525
10 075
11 625
13 175
(181)
(228)
(270)
(312)
(353)
12 400
(332)
150 (10,3)
200
500
750
1000
(13,8)
(34,5)
(51,7)
(69,0)
1364
3410
5115
6743
(36,6)
(91,4)
(137)
(181)
2480
6270
9300
12 400
(66,5)
(168)
(249)
(332)
5441
14 183
(146)
(380)
9688 (260) 16 585 (444) 23 715 (636)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
8525
10 075
11 625
13 175
(228)
(270)
(312)
(353)
1. For pressure settings under 10 psig (0,69 bar), inlet pressure should be limited to approximately 100 psig (6,90 bar) so that setpoint adjustment can be obtained.
- Blank areas indicate where maximum operating inlet pressure for a given orice is exceeded.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 67/104
627 Series Pressure Reducing Regulators
67
AIR P RODUCTS
Table 19. Type 627R Capacities for 1 and 2-inch (DN 25 and 50) Bodies Based on 20% Droop
OUTLET PRESSURE
RANGE, SPRING
PART NUMBER,
AND COLOR
OUTLET
PRESSURE
SETTING,
PSIG (bar)
INLET
PRESSURE,
PSIG (bar)
CAPACITIES IN SCFH (Nm3 /h) OF AIR
Orice Size, Inches (mm)
3/32 (2,4) 1/8 (3,2) 3/16 (4,8) 1/4 (6,4) 3/8 (9,5) 1/2 (12,7)
5 to 20 psig(1)
(0,3 to 1,4 bar)
10B3076X012
Yellow
10 (0,7)
15
20
60
(1,0)
(1,4)
(4,1)
163
217
496
(4,37)
(5,82)
(13,3)
302
388
907
(8,09)
(10,4)
(24,3)
651
853
1907
(17,4)
(22,9)
(51,1)
1147
1457
2860
(30,7)
(39)
(76,6)
1783
2093
4379
(47,8)
(56,1)
(117)
2271
2968
5348
(60,9)
(79,5)
(143)
100
200
500
(6,9)
(13,8)
(34,5)
767
1434
3410
(20,6)
(38,4)
(91,4)
1395
2612
5208
(37,4)
(70,0)
(140)
2744
4356
6642
(73,5)
(117)
(178)
3712
4929
8990
(99,5)
(132)
(241)
5828
8525
(156)
(228)
6316
9998
(169)
(268)
750
1000
1250
15001750
2000
(51,7)
(69,0)
(86,2)
(103)(121)
(138)
4185
4495
4883
51155270
5890
(112)
(120)
(131)
(137)(141)
(158)
6859
7363
(184)
(197)
6975 (187)
20 (1,4)
30
60
100
(2,1)
(4,1)
(6,9)
271
496
767
(7,26)
(13,3)
(20,6)
465
907
1395
(12,5)
(24,3)
(37,4)
1077
2038
3154
(28,9)
(54,6)
(84,5)
2000
3681
5665
(53,6)
(98,7)
(152)
3371
6045
8370
(90,3)
(162)
(224)
4875
8215
10 385
(131)
(220)
(278)
200
500
750
1000
(13,8)
(34,5)
(51,7)
(69,0)
1434
3410
5115
6743
(38,4)
(91,4)
(137)
(181)
2612
6068
6975
7487
(70,0)
(163)
(187)
(201)
5464
9145
9300
(146)
(245)
(249)
8138
10 308
(218)
(276)
10 850
(291) 11 160 (299)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
7750
8060
9300
10 850
(208)
(216)
(249)
(291)
15 to 40 psig
(1,0 to 2,8 bar)
10B3077X012
Green
40 (2,8)
60
100
200
(4,1)
(6,9)
(13,8)
473
767
1434
(12,7)
(20,6)
(38,4)
845
1387
2612
(22,6)
(37,2)
(70,0)
1883
3154
5913
(50,5)
(84,5)
(158)
3495
5665
8525
(93,7)
(152)
(228)
7130
10 463
16 585
(191)
(280)
(444)
7285
13 640
19 065
(195)
(366)
(511)
500
750
10001250
1500
1750
2000
(34,5)
(51,7)
(69,0)(86,2)
(103)
(121)
(138)
3410
5115
67438525
10 075
11 625
13 175
(91,4)
(137)
(181)(228)
(270)
(312)
(353)
6270
9300
12 40014 725
16 275
(168)
(249)
(332)(395)
(436)
12 633
15 655
17 980
(339)
(420)
(482)
16 895
18 290
(453)
(490)
35 to 80 psig
(2,4 to 5,5 bar)
10B3078X012
Blue
60 (4,1)
75
100
200
500
(5,2)
(6,9)
(13,8)
(34,5)
543
752
1434
3410
(14,6)
(20,2)
(38,4)
(91,4)
953
1349
2612
6270
(25,5)
(36,2)
(70,0)
(168)
2139
3030
5913
14 183
(57,3)
(81,2)
(158)
(380)
3767
5425
10 618
22 088
(101)
(145)
(285)
(592)
6665
9688
16 198
(179)
(260)
(434)
9920
12 943
21 468
(266)
(347)
(575)
750
1000
1250
1500
1750
2000
(51,7)
(69,0)
(86,2)
(103)
(121)
(138)
5115
6743
8525
10 075
11 625
13 175
(137)
(181)
(228)
(270)
(312)
(353)
9300
12 400
14 725
17 050
19 375
(249)
(332)
(395)
(457)
(519)
17 670
20 770
(474)
(557)
22 863 (613)
80 (5,5)
100
200
500
(6,9)
(13,8)
(34,5)
698
1434
3410
(18,7)
(38,4)
(91,4)
1263
2612
6270
(33,8)
(70,0)
(168)
2767
5913
14 183
(74,2)
(158)
(380)
5154
10 618
23 483
(138)
(285)
(629)
9300
19 453
(249)
(521)
13 485
24 645
(361)
(660)
750
10001250
1500
1750
2000
(51,7)
(69,0)(86,2)
(103)
(121)
(138)
5115
67438525
10 075
11 625
13 175
(137)
(181)(228)
(270)
(312)
(353)
9300
12 40014 725
17 050
19 375
(249)
(332)(395)
(457)
(519)
21 080
25 808
(565)
(696)
28 985
(777)
70 to 150 psig
(4,8 to 10,3 bar)
10B3079X012
Red
100 (6,9)
150
200
500
750
(10,3)
(13,8)
(34,5)
(51,7)
907
1434
3410
5115
(24,3)
(38,4)
(91,4)
(137)
1945
2612
6270
9300
(52,1)
(70,0)
(168)
(249)
4294
5913
14 183
(115)
(158)
(380)
6440
9300
(173)
(249)
12 013
15 578
(322)
(417)
15 733
20 693
(422)
(555)
1000
1250
1500
1750
2000
(69,0)
(86,2)
(103)
(121)
(138)
6743
8525
10 075
11 625
13 175
(181)
(228)
(270)
(312)
(353)
12 400
(332)
150 (10,3)
200
500
750
1000
(13,8)
(34,5)
(51,7)
(69,0)
1364
3410
5115
6743
(36,6)
(91,4)
(137)
(181)
2480
6270
9300
12 400
(66,5)
(168)
(249)
(332)
5441
14 183
(146)
(380)
9998 (268) 16 585 (444) 25 808 (692)
1250
1500
1750
2000
(86,2)
(103)
(121)
(138)
8525
10 075
11 625
13 175
(228)
(270)
(312)
(353)
1. For pressure settings under 10 psig (0,69 bar), inlet pressure should be limited to approximately 100 psig (6,90 bar) so that setpoint adjustment can be obtained.
- Blank areas indicate where maximum operating inlet pressure for a given orice is exceeded.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 68/104
627 Series Pressure Reducing Regulators
68
AIR P RODUCTS
Table 20. Type 627R Internal Relief Performance(1)
OUTLET PRESSURE
RANGE, SPRING
PART NUMBER,
AND COLOR
OUTLET
PRESSURE
SETTING,
PSIG (bar)
MAXIMUM
ALLOWABLE
DOWNSTREAM
SYSTEM
PRESSURE,
PSIG (bar)
MAXIMUM INLET PRESSURE TO KEEP MAXIMUM ALLOWABLE DOWNSTREAM
SYSTEM PRESSURE FROM BEING EXCEEDED, PSIG (bar) (2)
Orice Size, Inches (mm)
3/32 (2,4) 1/8 (3,2) 3/16 (4,8) 1/4 (6,4) 3/8 (9,5) 1/2 (12,7)
5 to 20 psig(3)
(0,3 to 1,4 bar)
10B3076X012
Yellow
10 (0,7)
60
100
125
175
200
250
(4,1)
(6,9)
(8,6)
(12,1)
(13,8)
(17,2)
1250
2000
2000
2000
2000
2000
(86,2)
(138)
(138)
(138)
(138)
(138)
740
1500
1900
2000
2000
2000
(51,0)
(103)
(131)
(138)
(138)
(138)
320
620
830
1100
1300
1600
(22,1)
(42,7)
(57,2)
(75,8)
(89,6)
(110)
190
390
480
670
770
960
(13,1)
(26,9)
(33,1)
(46,2)
(53,1)
(66,2)
95
180
220
320
360
450
(6,55)
(12,4)
(15,2)
(22,1)
(24,8)
(31,0)
75
130
160
220
260
320
(5,17)
(8,96)
(11,0)
(15,2)
(17,9)
(22,1)
20 (1,4)
60
100
125
175
200
250
(4,1)
(6,9)
(8,6)
(12,1)
(13,8)
(17,2)
850
2000
2000
2000
2000
2000
(58,6)
(138)
(138)
(138)
(138)
(138)
490
1300
1800
2000
2000
2000
(33,8)
(89,6)
(124)
(138)
(138)
(138)
210
600
800
1100
1300
1600
(14,5)
(41,4)
(55,2)
(75,8)
(89,6)
(110)
130
360
480
670
770
960
(8,96)
(24,8)
(33,1)
(46,2)
(53,1)
(66,2)
80
170
220
320
360
450
(5,52)
(11,7)
(15,2)
(22,1)
(24,8)
(31,0)
65
120
160
220
260
320
(4,48)
(8,27)
(11,0)
(15,2)
(17,9)
(22,1)
15 to 40 psig
(1,0 to 2,8 bar)
10B3077X012
Green
20 (1,4)
60
100
125
175
200
250
(4,1)
(6,9)
(8,6)
(12,1)
(13,8)
(17,2)
630
2000
2000
2000
2000
2000
(43,4)
(138)
(138)
(138)
(138)
(138)
200
1200
1700
2000
2000
2000
(13,8)
(82,7)
(117)
(138)
(138)
(138)
150
550
760
1100
1300
1600
(10,3)
(37,9)
(52,4)
(75,8)
(89,6)
(110)
100
330
450
630
770
960
(6,9)
(22,8)
(31,0)
(43,4)
(53,1)
(66,2)
70
160
210
320
360
460
(4,83)
(11,0)
(14,5)
(22,1)
(24,8)
(31,7)
65
120
160
220
260
320
(4,48)
(8,27)
(11,0)
(15,2)
(17,9)
(22,1)
30 (2,1)
100
125
175
200
250
(6,9)
(8,6)
(12,1)
(13,8)
(17,2)
2000
2000
2000
2000
2000
(138)
(138)
(138)
(138)
(138)
950
1500
2000
2000
2000
(65,5)
(103)
(138)
(138)
(138)
450
670
1000
1200
1600
(31,0)
(46,2)
(69,0)
(82,7)
(110)
260
400
610
760
970
(17,9)
(27,6)
(42,1)
(52,4)
(66,9)
140
190
300
360
460
(9,65)
(13,1)
(20,7)
(24,8)
(31,7)
110
150
220
260
320
(7,58)
(10,3)
(15,2)
(17,9)
(22,1)
40 (2,8)
100
125
175200
250
(6,9)
(8,6)
(12,1)(13,8)
(17,2)
1500
2000
20002000
2000
(103)
(138)
(138)(138)
(138)
700
1300
18002000
2000
(48,3)
(89,6)
(124)(138)
(138)
330
560
10001200
1600
(22,8)
(38,6)
(69,0)(82,7)
(110)
200
340
550730
970
(13,8)
(23,4)
(37,9)(50,3)
(66,9)
120
180
290350
460
(8,27)
(12,4)
(20,0)(24,1)
(31,7)
108
140
220250
320
(7,45)
(9,65)
(15,2)(17,2)
(22,1)
35 to 80 psig
(2,4 to 5,5 bar)
10B3078X012
Blue
40 (2,8)
125
150 175
200
250
(8,6)
(10,3)
(12,1)
(13,8)
(17,2)
2000
2000
2000
2000
2000
(138)
(138)
(138)
(138)
(138)
1100
1600
2000
2000
2000
(75,8)
(110)
(138)
(138)
(138)
500
750
980
1200
1600
(34,5)
(51,7)
(67,6)
(82,7)
(110)
300
440
580
720
940
(20,7)
(30,3)
(40,0)
(49,6)
(64,8)
170
230
290
340
450
(11,7)
(15,9)
(20,0)
(23,4)
(31,0)
140
180
220
250
320
(9,65)
(12,4)
(15,2)
(17,2)
(22,1)
60 (4,1)
125
150
175
200
250
(8,6)
(10,3)
(12,1)
(13,8)
(17,2)
900
1700
2000
2000
2000
(62,1)
(117)
(138)
(138)
(138)
450
1100
1700
2000
2000
(31,0)
(75,8)
(117)
(138)
(138)
270
540
780
1000
1400
(18,6)
(37,2)
(53,8)
(69,0)
(96,5)
190
300
470
610
880
(13,1)
(20,7)
(32,4)
(42,1)
(60,7)
140
190
250
310
420
(9,65)
(13,1)
(17,2)
(21,4)
(29,0)
130
160
200
230
310
(8,96)
(11,0)
(13,8)
(15,9)
(21,4)
80 (5,5)
150
175
200
250
(10,3)
(12,1)
(13,8)
(17,2)
800
1500
2000
2000
(55,2)
(103)
(138)
(138)
500
1200
1700
2000
(34,5)
(82,7)
(117)
(138)
300
550
800
1200
(20,7)
(37,9)
(55,2)
(82,7)
200
330
480
770
(13,8)
(22,8)
(33,1)
(53,1)
160
210
270
390
(11,0)
(14,5)
(18,6)
(26,9)
150
190
220
300
(10,3)
(13,1)
(15,2)
(20,7)
70 to 150 psig
(4,8 to 10,3 bar)
10B3079X012
Red
80 (5,5)
175
200250
(12,1)
(13,8)(17,2)
1400
20002000
(96,5)
(138)(138)
250
9602000
(17,2)
(66,2)(138)
240
5201000
(16,5)
(35,9)(69,0)
200
330620
(13,8)
(22,8)(42,7)
190
240350
(13,1)
(16,5)(24,1)
175
210280
(12,1)
(14,5)(19,3)
100 (6,9)200
250
(13,8)
(17,2)
1500
2000
(103)
(138)
250
1600
(17,2)
(110)
240
770
(16,5)
(53,1)
230
520
(15,9)
(35,9)
210
320
(14,5)
(22,1)
210
270
(14,5)
(18,6)
150 (10,3) 250 (17,2) 1200 (82,7) 260 (17,9) 260 (17,9) 260 (17,9) 260 (17,9) 260 (17,9)
1. The internal relief performance values are obtained by removing the disk assembly.
2. or inlet pressures in excess of 1000 psig �69,0 bar, refer to the maximum body and disk pressure ratings in the specications table.
3. For pressure settings under 10 psig (0,69 bar), inlet pressure should be limited to approximately 100 psig (6,90 bar) so the setpoint adjustment can be obtained.
- Shaded areas indicate maximum inlet pressures allowed during system malfunction only. Table 10 gives the maximum inlet pressure for normal regulator operation.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 69/104
627 Series Pressure Reducing Regulators
69
AIR P RODUCTS
Figure 5. Flanged Dimensions
Table 23. Shipping Weights
CASING MATERIALS APPROXIMATE SHIPPING WEIGHTS, POUNDS (kg)
Ductile iron or Steel 10.0 (4,54)
Aluminum 6.3 (2,86)
Table 21. NPT Dimensions
BODY SIZE,
INCHES
DIMENSIONS, INCHES (mm)
A B
D
E
GTypes 627, 627LB,
627R, 627M, and
627MR
Types 627H
and 627HM
All except
Type 627LBType 627LB
All except
Type 627LBType 627LB
3/4 and 1 4.06 (103) 7.37 (187) 1.94 (49,3) 5.25 (133) 6.75 (171) 7.62 (193) 7.94 (202) 1.00 (25,4)
2 5.00 (127) 7.88 (200) 2.50 (63,5) 5.38 (137) 7.12 (181) 7.62 (193) 7.94 (202) 1.69 (42,9)
Table 22. Flanged Dimensions
BODY SIZE,INCHES (DN)
DIMENSIONS, INCHES (mm)
A B
D
E G
CL150 RF CL300 RF CL600 RF CL150 RF CL300 RF CL600 RF
Types 627,
627R, and
627MR
Types 627H
and 627HMCL150 RF CL300 RF CL600 RF
1 (25)7.25
(184)
7.75
(197)
8.25
(210)
3.62
(91,9)
3.88
(98,6)
4.12
(105)
6.75
(171)
7.62
(193)
7.94
(202)
2.12
(53,8)
2.44
(62,0)
2.44
(62,0)
2 (50)10.00
(254)
10.50
(267)
11.25
(286)
5.00
(127)
5.25
(133)
5.62
(143)
7.12
(181)
7.62
(193)
7.94
(202)
3.00
(76,2)
3.25
(82,5)
3.25
(82,5)
3/4-INCH NPTVENT CONNECTION
1/4-INCH NPTIF SPECIFIED
D G
B
E
4.69(119)
Ø
11B9818
A
3/4-INCH NPTVENT CONNECTION
DG
E
A
B
10B5885_F
Ø4.69(119)
Figure 4. NPT Dimensions
1/4-INCH NPTIF SPECIFIED
INCHES(mm)
INCHES(mm)
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 70/104
627 Series Pressure Reducing Regulators
70
AIR P RODUCTS
Orifice Size (Select One)
3/32-inch (2,4 mm)*** 1/8-inch (3,2 mm)*** 3/16-inch (4,8 mm)*** 1/4-inch (6,4 mm)*** 3/8-inch (9,5 mm)*** 1/2-inch (12,7 mm)***
Outlet Pressure Range (Select One)
Types 627, 627R, 627M, and 627MR
5 to 20 psig (0,3 to 1,4 bar)***15 to 40 psig (1 to 2,8 bar)***35 to 80 psig (2,4 to 5,5 bar)***
70 to 150 psig (4,8 to 10,3 bar)***
Types 627H and 627HM
140 to 250 psig (9,7 to 17,2 bar)*** 240 to 500 psig (16,5 to 34,5 bar)***
Body Position (Select One) Vent Position (Select One)
Position 1 (standard)*** Position C** Position 2** Position D (standard)*** Position 3** Position E** Position 4** Position F**
DVGW Approval Required (Optional)
Yes
NACE Construction Required (Optional)
Yes
Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match this order.
Ordering Guide
Specication Worksheet
Application:
Specic Use
Line Size
Fluid TypeSpecic Gravity
Temperature
Does the Application Require Overpressure Protection?
Yes No
Pressure:
Maximum Inlet Pressure
Minimum Inlet Pressure
Differential Pressure
Set Pressure
Maximum Flow
Accuracy Requirements:
Less Than or Equal To:
5% 10% 20% 40%Construction Material Requirements (if known):
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your local
Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your local
Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
Type (Select One)
627 (standard construction)*** 627H (high-pressure version) (WCC steel only)*** 627M (external pressure registration)*** 627HM*** 627R (internal relief)*** 627MR*** 627LB*
Body Size (Select One)
3/4-inch (NPT only)*** 2-inch (DN 50)*** 1-inch (DN 25)***
Body Material and End Connection Styles (Select One)
Ductile Iron (not available for Types 627H and 627HM) NPT***
WCC Steel (required for Types 627H and 627HM) NPT*** CL150 RF** CL300 RF*** CL600 RF*** PN 16/25/40*
Stainless Steel
NPT*** CL150 RF**
CL300 RF*** CL600 RF*** PN 16/25/40*
Spring Case and Diaphragm Casing Material (Select One)
Aluminum (Types 627 and 627R only)***
WCC Steel***
Ductile iron***
Stainless steel**
Trim Material (Select One)
Aluminum (Types 627 and 627R only)***
Stainless steel (Types 627H and 627HM standard)***
Seat Material (Select One)
Nitrile (NBR)*** Nylon*** Fluoroelastomer (FKM)**
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 71/104
670 Series Panel-Mounted Regulators
71
AIR P RODUCTS
Introduction
The 670 Series panel-mounted regulatorsare compact, rugged units used primarilyfor manually loading gas regulators.Applications include any control devicethat needs to be manipulated from a remotelocation. The 670 Series includes anatmospheric bleed which allows the loading pressure to be reduced.
Three basic panels are available within the product line, each having one pressure regulator
connected to one or two gauges or two gaugesand a changeover valve. A single gaugetypically shows loading pressure tothe control valve. With two gauges, onegauge shows the loading pressure and theother gauge can be connected to showdownstream control pressure or any other pressure. The 670 Series is available with athree-way changeover valve. This allows theoperator to manually set the regulator in the off,manual, or automatic position.
• Control Flexibility • Convenient Fingertip Control
• Easy Connections
• Compact Size
Maximum Inlet Pressure
Without Changeover Valve:
250 psig (17,2 bar)
With Changeover Valve:
50 psig (3,4 bar)
Maximum Outlet Pressure
Without Changeover Valve:
100 psig (6,9 bar)
With Changeover Valve:
50 psig (3,4 bar)
See Table 1
Outlet Pressure Ranges
0 to 125 psig (0 to 8,6 bar) in four ranges
See Table 2
Token Internal Relief
Token relief on Type 67CR relieves only minor
build-up situations.
Temperature Capabilities
-20° to 180°F (-29° to 82°C)
Additional Technical Data
For more technical information, contact
your local Sales Ofce or log on to:
www.emersonprocess.com/regulators
Table 1. Available Congurations
TYPE DESCRIPTIONREGULATOR
TYPE
MAXIMUM
INLET
PRESSURE,
PSIG (bar)
MAXIMUM
EMERGENCY OUTLET
PRESSURE, PSIG (bar)
670Basic 1-gauge
panel67CR 250 (17,2)
50 (3,4) over
outlet setting
670GBasic 2-gauge
panel67CR 250 (17,2)
50 (3,4) over
outlet setting
670GV
2-gauge panel
with 3-way
changeover valve
67CR 50 (3,4) 55 (3,8)
Figure 1. Type 670 Panel Loader with One Gauge
P1127
Figure 2. Type 670G Panel Loader with Two Gauges
P1128
Figure 3. Type 670GV Panel Loader with
Two Gauges and Changeover Valve
P1130
Features
Figure 4. Type 670 Panel Loader
W0532
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 72/104
670 Series Panel-Mounted Regulators
72
AIR P RODUCTS
Table 2. Outlet Pressure Ranges
OUTLET PRESSURE RANGE,
PSIG (bar)SPRING PART NUMBER SPRING COLOR
0 to 20
0 to 35
0 to 60
0 to 125
(0 to 1,4)
(0 to 2,4)
(0 to 4,1)
(0 to 8,6)(1)
GE07809T012
T14059T0012
T14058T0012
T14060T0012(1)
Green Stripe
Silver
Blue Stripe
Red Stripe
1. This spring is not available with changeover valve (Type 670GV).
Table 3. Construction Materials
BODY AND SPRING CASE PANEL TUBING AND FITTINGS
Aluminum
Type 670: Zinc
Types 670G and 670GV:
Steel
Copper and Brass
Table 4. Typical Dimensions
TYPEDIMENSIONS, INCHES (mm)
A B C (Maximum) D E F PANEL CUT-OUT
670
670G
670GV
4.00
8.00
8.00
(102)
(203)
(203)
2.80
6.80
6.80
(71)
(173)
(173)
2.55
2.01
2.01
(65)
(51)
(51)
2.15
2.69
2.69
(55)
(68)
(68)
0.72
2.72
0.72
(18)
(69)
(18)
3.66
5.73
4.20
(93)
(146)
(107)
3.25 x 7.25
7.25 x 7.25
7.25 x 7.25
(83 x 184)
(184 x 184)
(184 x 184)
A
B
6.80(173)
8.00
(203)
C
(MAXIMUM)F
D
TYPE 670GE03276
B C F A0.88
(22)
8.00(203)
ED
6.80
(173)
TYPE 670GVGE02157
FA
B
8.00(203)
6.80
(173)
C
D
1/4-INCH NPT
SUPPLY CONNECTION
E E8.61(219)
8.61(219)
1/4-INCH NPTCONTROL PRESSURE
MONITORING
1/4-INCH NPTACTUATOR CONNECTION
TYPE 670GGE13900
INCHES(mm)
Figure 5. Dimensions
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 73/104
670 Series Panel-Mounted Regulators
73
AIR P RODUCTS
Ordering Guide
Specication Worksheet
Application:
Specic Use
Line Size
Fluid Type
Specic Gravity
Temperature
Does the Application Require Overpressure Protection?
Yes No
Pressure:
Maximum Inlet Pressure
Minimum Inlet Pressure
Differential Pressure
Set Pressure
Maximum Flow
Accuracy Requirements:
Less Than or Equal To:
5% 10% 20% 40%
Construction Material Requirements (if known):
Body Type (Select One)
670 (basic 1-gauge panel)***
670G (basic 2-gauge panel)***
670GV (2-gauge panel with 3-way changeover)***
Outlet Pressure Range (Select One)
0 to 20 psig (0 to 1,4 bar)***
0 to 35 psig (0 to 2,4 bar)***
0 to 60 psig (0 to 4,1 bar)***
0 to 125 psig (0 to 8,6 bar) (Not available with Type 670GV) ***
Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match this order.
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your local
Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your local
Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 74/104
Types 1098-EGR and 1098H-EGR
Pressure Reducing Regulators
74
AIR P RODUCTS
Introduction
Types 1098-EGR and 1098H-EGR regulators
provide accurate pressure control in a variety of
plant air applications. The superior performance
of these regulators is due to the amplifying
effect of the pilot and the two-path control
system. Changes in outlet pressure act quickly
on the actuator diaphragm to provide fast
response. The pilot amplies system changes
positioning the main valve for precise control.
Body Sizes and End Connection Styles
See Table 1
Actuator Sizes
See Table 2
Pressure Registration
External
Maximum Main Valve Inlet Pressure
400 psig (28 bar) or body rating limit,
whichever is lower
Maximum Outlet (Casing) Pressure
See Table 2
Outlet (Control) Pressure Ranges
14-inches w.c. to 300 psig
(35 mbar to 20,7 bar) in nineteen ranges
See Table 6
Flow and Sizing Coefficients
See Table 4
Temperature Capabilities
Nitrile (NBR): -20° to 180°F (-29° to 82°C)
Fluoroelastomer (FKM):0° to 300°F (-18° to 149°C) except water
which is limited to 180°F (82°C)
Ethylenepropylene (EPR):
-20° to 275°F (-29° to 135°C)
Additional Technical Data
For more technical information contact
your local Sales Ofce or log on to:
www.emersonprocess.com/regulators
Figure 1. Type 1098-EGR with
Size 40 Actuator
Table 2. Actuator Sizes and Maximum Pressures
ACTUATOR OUTLET
PRESSURE,
PSIG (bar)
EMERGENCY
CASING PRESSURE,
PSIG (bar)Type Size
1098
30
40 (standard)
70
100
75
50
(6,9)
(5,2)
(3,4)
115
82
65
(7,9)
(5,7)
(4,5)
1098H 30 300 (20,7) 400 (27,6)
W6956
Table 3. Construction Materials
BODY BODY FLANGE BONNET CASINGPLUG AND
SEAT RINGCAGE
DIAPHRAGMS, O-RINGS,
SEALS, AND PILOT SEAT
PILOT BODY
AND CASING
Cast iron, WCC Steel,
CF8M Stainless steel
Cast iron, WCC Steel,
CF8M Stainless steel
Steel or CF8M
Stainless steel
Type 1098:
G10100 Steel or304 Stainless steel
Type 1098H:
WCC Steel or
CF8M Stainless steel
Hardened 416
Stainless steel, or
316 Stainless steel
CF8M Stainless
steel (linear),416 or 316 Stainless
steel (Whisper ®),
or Hardened ENC
coated Cast iron
(quick opening)
Nitrile (NBR) (standard),
Fluoroelastomer (FKM), or
Ethylenepropylene (EPR)
Aluminum,
Stainless steel,
or Cast iron
Table 1. Body Sizes and End Connection Styles
BODY SIZE,
INCHES (DN)CAST IRON STEEL OR STAINLESS STEEL
1 or 2 (25 or 50)NPT or CL125 FF
or CL250 RF
NPT, CL150 RF,
CL300 RF, CL600 RF, BWE, SWE,
or PN 16/25/40
3, 4, or 6
(80, 100, or 150)
CL125 FF
or CL250 RF
CL150 RF, CL300 RF,
CL600 RF, BWE, or PN 16/25/40
8 x 6 and 12 x 6
(200 x 150 and 300 x 150)- - - -
CL150 RF, CL300 RF,
CL600 RF, BWE, or PN 16/25/40
Features
• Differential as low as
1 psid (70 mbar d)
• Main Valve Material: Cast Iron,
Steel, or Stainless Steel
• Optional Noise Abatement Trim • Oxygen Service Capability
• Easy Top Entry
In-line Maintenance
• No Atmospheric Bleed
• Aqueous Trim Packages
(Application Specic)
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 75/104
Types 1098-EGR and 1098H-EGR
Pressure Reducing Regulators
75
AIR P RODUCTS
Table 4. Flow and Sizing Coefcients
LINEAR CAGE
BODY SIZE,
INCHES (DN)
Line Size Equals Body Size 2:1 Line Size to Body Size
C1
Km
IEC SIZING
COEFFICIENT
Cg
Cv
C1
Cg
Cv
XT
FD
FL
Regulating Wide-Open Regulating Wide-Open Regulating Wide-Open Regulating Wide-Open
1 (25) 600 632 16.8 17.7 35.7 568 598 17.2 18.1 33.0 0.70 0.806 0.43 0.84
2 (50) 2280 2400 63.3 66.7 36.0 2050 2160 59.6 62.8 34.4 0.70 0.820 0.35 0.84
3 (80) 4630 4880 132 139 35.1 4410 4650 128 135 34.4 0.70 0.779 0.30 0.84
4 (100) 7320 7710 202 213 36.2 6940 7310 198 209 35.0 0.70 0.829 0.28 0.84
6 (150) 12,900 13,600 397 418 32.5 12,100 12,800 381 404 31.7 0.70 0.668 0.28 0.84
8 x 6
(200 x 150)18,480 19,450 578 608 32.0 17,370 18,280 543 571 32.0 0.70 0.648 0.28 0.84
12 x 6
(300 x 150)21,180 22,290 662 697 32.0 19,900 20,950 622 655 32.0 0.70 0.648 0.28 0.84
WHISPER TRIM ® CAGE
BODY SIZE,
INCHES (DN)
Line Size Equals Body Size 2:1 Line Size to Body Size
C1
Km
IEC SIZING
COEFFICIENTS
Cg
Cv
C1
Cg
Cv
XT
FD
FL
Regulating Wide-Open Regulating Wide-Open Regulating Wide-Open Regulating Wide-Open
1 (25) 576 607 16.7 17.6 34.5 529 557 15.6 16.4 34.0 0.80 0.753 0.10 0.89
2 (50) 1970 2080 54.7 57.8 36.0 1830 1930 52.3 55.1 35.0 0.80 0.820 0.07 0.89
3 (80) 3760 3960 107 113 35.0 3630 3830 106 110 34.2 0.80 0.775 0.05 0.89
4 (100) 6280 6610 180 190 34.8 6020 6340 171 180 35.2 0.80 0.766 0.04 0.89
6 (150) 9450 9950 295 310 32.0 9240 9730 291 306 31.7 0.80 0.648 0.03 0.89
8 x 6
(200 x 150)10,660 11,220 305 321 35.0 10,020 10,550 286 301 35.0 0.80 0.775 0.03 0.89
12 x 6
(300 x 150)11,050 11,630 316 332 35.0 10,380 10,930 297 312 35.0 0.80 0.775 0.03 0.89
QUICK OPENING TRIM
BODY SIZE,
INCHES (DN)
Line Size Equals Body Size 2:1 Line Size to Body Size
C1
Km
IEC SIZING
COEFFICIENTS
Cg
Cv
C1
Cg
Cv
XT
FD
FL
Regulating Wide-Open Regulating Wide-Open Regulating Wide-Open Regulating Wide-Open
1 (25) 769 810 23.9 25.2 32.2 728 766 24.5 25.7 29.8 0.70 0.656 0.36 0.84
2 (50) 2460 2590 68.3 71.9 36.0 2214 2331 64.4 67.8 34.4 0.70 0.820 0.36 0.84
3 (80) 4790 5050 141 149 33.9 4571 4812 137 145 33.3 0.70 0.727 0.36 0.84
4 (100) 8120 8550 229 242 35.4 7701 8106 225 237 34.2 0.70 0.793 0.30 0.84
6 (150) 14,915 15,700 445 469 33.5 14,571 15,350 435 458 33.5 0.70 0.710 0.28 0.84
8 x 6
(200 x 150)15,770 22,470 478 681 33.0 15,410 20,100 467 609 33.0 0.70 0.689 0.28 0.84
12 x 6
(300 x 150)15,770 25,750 478 780 33.0 15,410 25,760 467 781 33.0 0.70 0.689 0.28 0.84
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 76/104
Types 1098-EGR and 1098H-EGR
Pressure Reducing Regulators
76
AIR P RODUCTS
Table 5. Maximum and Minimum Differential Pressures for Main Valve Selection
BODY SIZE,
INCHES (DN)
SPRING PART NUMBER
AND COLOR
MAXIMUM ALLOWABLE
DIFFERENTIAL
PRESSURE(1), PSIG (bar)
MINIMUM DIFFERENTIAL PRESSURE REQUIRED FOR FULL STROKE, PSIG (bar)
Size 30 Actuator Size 40 Actuator Size 70 Actuator
1 (25)
14A9687X012 Green 60 (4,1) 3.5 (0,24) 2.5 (0,17) 1 (0,069)
14A9680X012 Blue 125 (8,6) 5 (0,34) 4 (0,28) 1.5 (0,10)
14A9679X012 Red400 (27,6) or body rating
limit, whichever is lower 7 (0,48) 5 (0,34) 2.5 (0,17)
2 (50)
14A6768X012 Yellow 20 (1,4) - - - - 2 (0,14) 1 (0,069)
14A6626X012 Green 60 (4,1) 4 (0,28) 3 (0,21) 1.5 (0,10)
14A6627X012 Blue 125 (8,6) 6 (0,41) 5 (0,34) 2 (0,14)
14A6628X012 Red400 (27,6) or body rating
limit, whichever is lower 11 (0,76) 10 (0,69) 3 (0,21)
3 (80)
14A6771X012 Yellow 20 (1,4) - - - - 2.5 (0,17) 1 (0,069)
14A6629X012 Green 60 (4,1) 5 (0,34) 4 (0,28) 2 (0,14)
14A6630X012 Blue 125 (8,6) 8 (0,55) 6 (0,41) 2.5 (0,17)
14A6631X012 Red400 (27,6) or body rating
limit, whichever is lower 14 (0,97) 11 (0,76) 4 (0,28)
4 (100)
14A6770X012 Yellow 20 (1,4) - - - - 3.5 (0,24) 1.3 (0,09)
14A6632X012 Green 60 (4,1) 10 (0,69) 5 (0,34) 2.5 (0,17)
14A6633X012 Blue 125 (8,6) 13 (0,90) 8 (0,55) 3 (0,21)
14A6634X012 Red400 (27,6) or body rating
limit, whichever is lower 22 (1,52) 13 (0,90) 5 (0,34)
6, 8 x 6, and 12 x 6
(150, 200 x 150,
and 300 x 150)
15A2253X012 Yellow 20 (1,4) - - - - 6 (0,41) 2.2 (0,15)
14A9686X012 Green 60 (4,1) 13 (0,90) 9.5 (0,66) 4 (0,28)
14A9685X012 Blue 125 (8,6) 19 (1,31) 14 (0,97) 6 (0,41)
15A2615X012 Red400 (27,6) or body rating
limit, whichever is lower 28 (1,93)(2) 19 (1,31) 8 (0,55)
1. Maximum inlet pressure is equal to set pressure plus maximum differential.
2. Requires special 6300 Series pilot construction without integral relief valve and with external Type 1806, 40 psid (2,76 bar d) relief valve.
Table 6. Outlet (Control) Pressure Ranges
PILOT TYPE OUTLET (CONTROL) PRESSURE RANGEPILOT CONTROL DATA
Color Code Spring Part Number
63513 to 20 psig5 to 35 psig
35 to 100 psig
(207 mbar to 1,4 bar)(0,3 to 2,4 bar)
(2,4 to 6,9 bar)
GreenSilver
Red
1B9860272121B788327022
1K748527202
635214-inches w.c. to 2 psig
2 to 10 psig
(35 to 138 mbar)
(138 mbar to 0,7 bar)
Yellow
Black
14A9672X012
14A9673X012
63533 to 40 psig
35 to 100 psig
(207 mbar to 2,8 bar)
(2,4 to 6,9 bar)
Yellow
Red
1E392527022
1K748527202
6354L(1)
6354M(2)
6354H
85 to 200 psig
175 to 220 psig
200 to 300 psig
(5,9 to 13,8 bar)(1)
(12,1 to 15,2 bar)(2)
(13,8 to 20,7 bar)(2)
Blue
Blue
Green
1L346127142
1L346127142
15A9258X012
61L
61LD
61LE
0.25 to 2 psig
1 to 5 psig
2 to 10 psig
5 to 15 psig
10 to 20 psig
(17 to 138 mbar)
(69 mbar to 0,3 bar)
(138 mbar to 0,7 bar)
(0,3 to 1,0 bar)
(0,7 to 1,4 bar)
Red
Yellow
Blue
Brown
Green
1B886327022
1J857827022
1B886427022
1J857927142
1B886527022
61H 10 to 65 psig (0,7 to 4,5 bar) Green Stripe 0Y066427022
61HP
15 to 45 psig
35 to 100 psig100 to 300 psig
(1,0 to 3,1 bar)
(2,4 to 6,9 bar)(6,9 to 20,7 bar)
Yellow
BlueRed
1E392527022
1D3872270221D465127142
1. Without diaphragm limiter.
2. With diaphragm limiter.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 77/104
Types 1098-EGR and 1098H-EGR
Pressure Reducing Regulators
77
AIR P RODUCTS
Table 7. Proportional Band (Standard Pilot Restriction and Size 40 Type 1098 Actuator (1))
BODY SIZE,
INCHES (DN)
PILOT PROPORTIONAL BAND, PSI (bar)
Types Control Spring Color Yellow or Green
Main Valve Spring
Blue
Main Valve Spring
Red
Main Valve Spring
1 (25)
6351
Green 0.1 (0,0069) 0.2 (0,014) 0.4 (0,028)
Cadmium 0.2 (0,014) 0.4 (0,028) 0.8 (0,055)
Red 0.4 (0,028) 0.8 (0,055) 1.0 (0,069)
6352Yellow 0.04 (0,0028) 0.1 (0,0069) 0.2 (0,014)
Black 0.08 (0,0056) 0.2 (0,014) 0.4 (0,028)
6353
Yellow 0.2 (0,014) 0.4 (0,028) 0.8 (0,055)
Red 0.4 (0,028) 0.8 (0,055) 1.0 (0,069)
61L All 0.09 (0,006) 0.16 (0,011) 0.3 (0,021)
61LD All 0.04 (0,0028) 0.08 (0,0056) 0.2 (0,014)
61LE, 61H, and 61HD All 0.4 (0,028) 0.8 (0,055) 1.0 (0,069)
2 (50)
6351
Green 0.2 (0,014) 0.3 (0,021) 0.5 (0,034)
Cadmium 0.3 (0,021) 0.5 (0,034) 1.0 (0,069)
Red 0.5 (0,034) 1.0 (0,069) 1.4 (0,097)
6352Yellow 0.05 (0,0034) 0.15 (0,010) 0.3 (0,021)
Black 0.1 (0,0069) 0.3 (0,021) 0.6 (0,041)
6353Yellow 0.3 (0,021) 0.5 (0,034) 1.0 (0,069)
Red 0.5 (0,034) 1.0 (0,069) 1.4 (0,097)
61L All 0.1 (0,0069) 0.2 (0,014) 0.6 (0,041)
61LD All 0.05 (0,0034) 0.1 (0,0069) 0.3 (0,021)
61LE, 61H, and 61HD All 1.2 (0,083) 1.0 (0,069) 1.4 (0,097)
3 (80)
6351Green 0.3 (0,021) 0.4 (0,028) 0.6 (0,041)
Cadmium 0.4 (0,028) 0.6 (0,041) 1.2 (0,083)
Red 0.9 (0,062) 1.2 (0,083) 1.5 (0,103)
6352Yellow 0.1 (0,0069) 0.2 (0,014) 0.4 (0,028)
Black 0.2 (0,014) 0.4 (0,028) 0.8 (0,055)
6353Yellow 0.4 (0,028) 0.6 (0,041) 1.2 (0,083)
Red 0.9 (0,062) 1.2 (0,083) 1.5 (0,103)
61L All 0.2 (0,014) 0.4 (0,028) 1.0 (0,069)
61LD All 0.1 (0,0069) 0.2 (0,014) 0.5 (0,034)
61LE, 61H, and 61HD All 0.9 (0,062) 1.2 (0,083) 1.5 (0,103)
4 (100)
6351
Green 0.4 (0,028) 0.5 (0,034) 0.8 (0,055)
Cadmium 0.7 (0,048) 0.8 (0,055) 1.4 (0,097)
Red 1.2 (0,083) 2.0 (0,14) 3.0 (0,21)
6352Yellow 0.15 (0,010) 0.3 (0,021) 0.6 (0,041)
Black 0.3 (0,021) 0.6 (0,041) 1.2 (0,083)
6353 Yellow 0.7 (0,048) 0.8 (0,055) 1.4 (0,097)
Red 1.2 (0,083) 2.0 (0,14) 3.0 (0,21)
61L All 0.3 (0,021) 0.6 (0,041) 1.4 (0,097)
61LD All 0.15 (0,010) 0.3 (0,021) 0.7 (0,048)
61LE, 61H, and 61HD All 1.2 (0,083) 2.0 (0,14) 3.0 (0,21)
6, 8 x 6, and 12 x 6
(150, 200 x 150,
and 300 x 150)
6351
Green 0.5 (0,034) 0.6 (0,041) 1.0 (0,069)
Cadmium 0.9 (0,062) 1.5 (0,103) 2.0 (0,14)
Red 1.5 (0,103) 2.5 (0,17) 3.5 (0,24)
6352Yellow 0.2 (0,014) 0.4 (0,028) 0.8 (0,055)
Black 0.4 (0,028) 0.8 (0,055) 1.6 (0,11)
6353Yellow 0.9 (0,062) 1.5 (0,103) 2.0 (0,14)
Red 1.5 (0,103) 2.5 (0,17) 3.5 (0,24)
61L All 0.6 (0,041) 1.2 (0,083) 2.0 (0,14)
61LD All 0.3 (0,021) 0.6 (0,041) 1.0 (0,069)
61LE, 61H, and 61HD All 1.5 (0,103) 2.5 (0,17) 3.5 (0,24)
1. For other combinations, multiply table values by 1.6 for a size 30 actuator, 0.4 for a size 70 actuator, 2.0 for a low-gain Type 6352 or 6353 pilot restriction, and 0.5 for a high-gain
Type 6352 or 6353 pilot restriction. For instance, a standard 2-inch (DN 50) Type 1098-EGR-6352 regulator with black pilot control spring and blue main valve spring has a
proportional band of 0.3 psi (0,021 bar) as given in the table, but this same regulator with low-gain restriction and size 70 actuator has a proportional band of
0.3 psi (0,021 bar) x 2.0 x 0.4 = 0.24 psi (0,017 bar).
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 78/104
Types 1098-EGR and 1098H-EGR
Pressure Reducing Regulators
78
AIR P RODUCTS
Table 8. Approximate Proportional Band Range (Standard Pilot Restriction, Size 30 Type 1098H Actuator (1))
BODY SIZE,
INCHES (DN)
PILOT APPROXIMATE PROPORTIONAL BAND RANGE, PSI (bar)
Type Control Spring Color Green Main
Valve Spring
Blue Main
Valve Spring
Red Main
Valve Spring
1 (25)
6354L, 6354M, or 6354H Blue or Green
1.0 (0,07) 1.5 (0,10) 2.5 (0,17)
2 (50) 1.5 (0,10) 2.0 (0,14) 3.0 (0,21)
3 (80) 2.5 (0,17) 3.0 (0,21) 4.0 (0,28)
4 (100) 3.5 (0,24) 4.0 (0,28) 5.0 (0,34)
6 (150) 4.0 (0,28) 5.0 (0,34) Not Available
1. For other restrictions, multiply table values by 2.0 for a low-gain restriction or by 0.5 for a high-gain restriction. For instance, a standard 2-inch (DN 50) Type 1098H-EGR-6354L
regulator with blue control spring and blue main valve spring has a proportional band of 2.0 psi (0,14 bar) as given in the table. But this same regulator with low-gain restriction has a
proportional band of 2.0 psi (0,14 bar) x 2.0 = 4.0 psi (0,28 bar).
INLET PRESSURE
OUTLET PRESSURE
LOADING PRESSURE
ATMOSPHERIC PRESSURE
A6563
Figure 2. Type 1098-EGR Operational Schematic
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 79/104
Types 1098-EGR and 1098H-EGR
Pressure Reducing Regulators
79
AIR P RODUCTS
Table 9. Capacities
INLET
PRESSURE,
PSIG (bar)
OUTLET PRESSURE
SETTING, PSIG (bar)
CAPACITIES IN THOUSANDS OF SCFH (Nm3 /h) OF AIR FOR REGULATORS WITH
STANDARD LINEAR CAGE, STANDARD TRAVEL, AND LINE EQUALS MAIN VALVE BODY SIZE
1-inch (DN 25) 2-inch (DN 50) 3-inch (DN 80) 4-inch (DN 100) 6-inch (DN 150)8 x 6-inch
(DN 200 x 150)
12 x 6-inch
(DN 300 x 150)
3 (0,21) 7-inches w.c. (17 mbar) 6.2 (0,17) 24.8 (0,67) 51.2 (1,37) 78.3 (2,10) - - - - - - - - - - - -
5 (0,34)
7-inches w.c. (17 mbar)
1 (69 mbar)
2 (138 mbar)
8.53 (0,23)
7.75 (0,21)
6.98 (0,19)
32.6 (0,87)
30.2 (0,81)
27.1 (0,73)
67.4 (1,81)
63.6 (1,70)
56.6 (1,52)
105 (2,81)
97.7 (2,62)
86.8 (2,33)
199 (5,33)
187 (5,01)
- - - -
246 (6,59)
232 (6,22)
- - - -
246 (6,59)
232 (6,22)
- - - -
10 (0,69)
7-inches w.c. (17 mbar)
3 (207 mbar)5 (0,3)
7 (0,5)
13.2 (0,35)
11.6 (0,31)10.1 (0,27)
8.53 (0,23)
48.8 (1,31)
43.4 (1,16)38.0 (1,02)
31.0 (0,83)
100 (2,68)
89.9 (2,41)79.1 (2,12)
63.6 (1,70)
156 (4,18)
140 (3,75)122 (3,27)
98.4 (2,64)
291 (7,80)
264 (7,08)234 (6,27)
- - - -
359 (9,62)
326 (8,74)290 (7,77)
- - - -
359 (9,62)
326 (8,74)290 (7,77)
- - - -
15 (1,03)
1 (69 mbar)
4 (276 mbar)
8 (0,6)
12 (0,8)
16.3 (0,44)
15.5 (0,42)
13.2 (0,35)
9.3 (0,25)
61.2 (1,64)
57.4 (1,54)
48.8 (1,31)
34.1 (0,91)
126 (3,38)
119 (3,19)
101 (2,71)
70.5 (1,89)
197 (5,28)
184 (4,93)
156 (4,18)
109 (2,92)
365 (9,78)
345 (9,25)
298 (7,99)
- - - -
449 (12,0)
425 (11,4)
369 (9,89)
- - - -
449 (12,0)
425 (11,4)
369 (9,89)
- - - -
20 (1,38)
1 (69 mbar)
10 (0,7)
15 (1,0)
17 (1,2)
20.9 (0,56)
16.3 (0,44)
12.4 (0,33)
10.1 (0,27)
79.1 (2,12)
61.2 (1,64)
46.5 (1,25)
37.2 (1,00)
160 (4,29)
127 (3,40)
96.9 (2,60)
76.7 (2,06)
254 (6,81)
197 (5,28)
149 (3,99)
119 (3,19)
447 (12,0)
374 (10,0)
288 (7,72)
- - - -
547 (14,7)
461 (12,4)
356 (9,54)
- - - -
547 (14,7)
461 (12,4)
356 (9,54)
- - - -
30 (2,07)
4 (276 mbar) or less
15 (1,0)
20 (1,4)
25 (1,7)
27.1 (0,73)
22.5 (0,60)
19.4 (0,52)
14.0 (0,38)
102 (2,73)
83.7 (2,24)
72.1 (1,93)
53.5 (1,43)
207 (5,55)
173 (4,64)
149 (3,99)
112 (3,00)
327 (8,76)
267 (7,16)
230 (6,16)
171 (4,58)
577 (15,5)
505 (13,5)
440 (11,8)
332 (8,90)
704 (18,9)
622 (16,7)
544 (14,6)
412 (11,0)
704 (18,9)
622 (16,7)
544 (14,6)
412 (11,0)
40 (2,76)
9 (0,6) or less
20 (1,4)
30 (2,1)
35 (2,4)
32.6 (0,87)
27.9 (0,75)
21.7 (0,58)
16.3 (0,44)
125 (3,35)
105 (2,81)
81.4 (2,18)
59.7 (1,60)
253 (6,78)
217 (5,82)
168 (4,50)
125 (3,35)
401 (10,7)
336 (9,01)
260 (6,97)
191 (5,12)
705 (18,9)
632 (16,9)
499 (13,4)
372 (9,97)
863 (23,1)
780 (20,9)
618 (16,6)
461 (12,4)
863 (23,1)
780 (20,9)
618 (16,6)
461 (12,4)
50 (3,45)
13 (0,9) or less
20 (1,4)
30 (2,1)
40 (2,8)
45 (3,1)
38.8 (1,04)
34.9 (0,94)
31.0 (0,83)
24.0 (0,64)
17.1 (0,46)
147 (3,94)
133 (3,56)
118 (3,16)
89.1 (2,39)
65.9 (1,77)
299 (8,01)
274 (7,34)
243 (6,51)
186 (4,99)
136 (3,65)
474 (12,7)
427 (11,4)
376 (10,1)
286 (7,67)
209 (5,60)
835 (22,4)
793 (21,3)
712 (19,1)
552 (14,8)
408 (10,9)
1020 (27,3)
975 (26,1)
879 (23,6)
683 (18,3)
506 (13,6)
1020 (27,3)
975 (26,1)
879 (23,6)
683 (18,3)
506 (13,6)
75 (5,17)
24 (1,7) or less
50 (3,4)
60 (4,1)
70 (4,8)
53.5 (1,43)
41.9 (1,12)
34.1 (0,91)
20.9 (0,56)
205 (5,49)
157 (4,21)
129 (3,46)
78.3 (2,10)
415 (11,1)
325 (8,71)
266 (7,13)
162 (4,34)
656 (17,6)
502 (13,5)
410 (11,0)
250 (6,70)
1157 (31,0)
955 (25,6)
790 (21,2)
486 (13,0)
1414 (37,9)
1179 (31,6)
977 (26,2)
603 (16,2)
1414 (37,9)
1179 (31,6)
977 (26,2)
603 (16,2)
100 (6,90)
35 (2,4) or less
60 (4,1)
75 (5,2)
69.0 (1,85)
57.4 (1,54)
48.1 (1,29)
261 (7,00)
217 (5,82)
183 (4,90)
531 (14,2)
448 (12,0)
379 (10,2)
839 (22,5)
694 (18,6)
584 (15,7)
1479 (39,6)
1309 (35,1)
1119 (30,0)
1808 (48,5)
1614 (43,3)
1384 (37,1)
1808 (48,5)
1614 (43,3)
1384 (37,1)
125 (8,62)46 (3,2) or less
75 (5,2)
83.7 (2,24)
70.5 (1,89)
319 (8,55)
267 (7,16)
646 (17,3)
550 (14,7)
1022 (27,4)
853 (22,9)
1802 (48,3)
1606 (43,0)
2203 (59,0)
1980 (53,1)
2203 (59,0)
1980 (53,1)
150 (10,3)57 (3,9) or less
75 (5,2)
98.4 (2,64)
89.1 (2,39)
375 (10,1)
338 (9,06)
763 (20,4)
695 (18,6)
1205 (32,3)
1082 (29,0)
2124 (56,9)
2010 (53,9)
2597 (69,6)
2473 (66,3)
2597 (69,6)
2473 (66,3)
175 (12,1) 68 (4,7) or less 114 (3,06) 432 (11,6) 878 (23,5) 1388 (37,2) 2447 (65,6) 2991 (80,2) 2991 (80,2)
200 (13,8) 75 (5,2) or less 129 (3,46) 489 (13,1) 994 (26,6) 1571 (42,1) 2769 (74,2) 3385 (90,7) 3385 (90,7)
250 (17,2) 75 (5,2) or less 159 (4,26) 604 (16,2) 1225 (32,8) 1938 (51,9) 3414 (91,5) 4173 (112) 4173 (112)
300 (20,7) 75 (5,2) or less 189 (5,07) 718 (19,2) 1457 (39,0) 2303 (61,7) 4059 (109) 4962 (133) 4962 (133)
350 (24,1) 75 (5,2) or less 219 (5,87) 832 (22,3) 1688 (45,2) 2669 (71,5) 4703 (126) 5750 (154) 5750 (154)
400 (27,6) 75 (5,2) or less 249 (6,67) 946 (25,4) 1920 (51,5) 3035 (81,3) 5348 (143) 6538 (175) 6538 (175)
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 80/104
Types 1098-EGR and 1098H-EGR
Pressure Reducing Regulators
80
AIR P RODUCTS
Table 11. Actuator Dimensions
ACTUATOR
TYPE AND
SIZE
DIMENSIONS, INCHES (mm)
C
(Diameter)E H
M
With Pilot
Spring Case
Vent
Without Pilot
Spring Case
Vent
1098 - 30 11.38 (289) 5.69 (145) 7.88 (200) 9.50 (241) 9.31 (236)
1098 - 40 13.12 (333) 5.75 (146) 7.88 (200) 9.50 (241) 9.31 (236)
1098 - 70 21.12 (536) 7.44 (189) 14 .19 (360) 15.81 (402) 15 .62 (397)
1098H - 30 11.38 (289) 6.06 (154) 7.88 (200) 9.50 ( 241) 9.31 ( 236)
Table 12. Shipping Weights
BODY SIZE,
INCHES (DN)
APPROXIMATE SHIPPING WEIGHTS, POUNDS (kg)
Type 1098
Size 30
Actuator
Type 1098
Size 40
Actuator
Type 1098
Size 70
Actuator
Type 1098H
Size 30
Actuator
1 (25) 55 (25) 65 (29) 140 (64) 80 (36)
2 (50) 75 (34) 85 (39) 160 (73) 100 (45)
3 (80) 115 (52) 125 (57) 200 (91) 140 (64)
4 (100) 165 (75) 175 (79) 250 (113) 190 (86)
6 (150) 350 (159) 360 (163) 435 (197) 375 (170)
8 x 6
(DN 200 x 150)625 (284) 635 (288) 710 (322) 650 (295)
12 x 6
(DN 300 x 150)1102 (500) 1112 (504) 1187 (538) 1127 (511)
A/2
AR
G
D
E
AR (ACTUATOR REMOVAL CLEARANCE)
H
C1.94
(49,3)
INCHES
(mm)
Z
(REMOVAL CLEARANCE
FOR TRIM PACKAGE)
M
Figure 3. Dimensions
B1113_1_B
Table 10. Main Valve Dimensions
BODY SIZE,
INCHES (DN)
DIMENSIONS, INCHES (mm)
A
D G R
Z
AR
NPT Cast Iron,
CL600 RF,
BWE, or NPT
Steel and
Stainless
Steel
CL125 FF
Cast Iron or
CL150 RF Steel
and Stainless
Steel
CL250 RF
Cast Iron or
CL300 RF Steel
and Stainless
Steel
PN 16/25/40
Steel and
Stainless
Steel
Cast Iron
Steel and
Stainless
Steel
1 (25) 8.25 (210) 7.25 (184) 7.75 (197) 7.62 (194) 3.88 (99) 8.62 (219) 4.06 (103) 12.00 (305) 13.75 (349) 3.00 (76)
2 (50) 11.25 (286) 10.00 (254) 10.50 (267) 10.19 (259) 4.56 (116) 9.12 (232) 4.06 (103) 13.31 (338) 15.06 (383) 3.12 (79)
3 (80) 13.25 (337) 11.75 (298) 12.50 (317) 11.81 (300) 5.31 (135) 11.31 (287) 5.06 (129) 16.50 (419) 18.25 (464) 3.88 (99)
4 (100) 15.50 (394) 13.88 (353) 14.50 (368) 13.56 (344) 6.56 (167) 12.69 (322) 5.06 (129) 19.12 (486) 21.12 (536) 5.12 (130)
6 (150) 20.00 (508) 17.75 (451) 18.62 (473) 17.48 (444) 8.06 (205) 13.62 (346) 8.00 (203) 20.25 (514) 23.25 (591) 6.62 (168)
8 x 6
(200 x 150)24.0 (610) 21.4 (544) 22.4 (569) - - - - 9.76 (248) 15.02 (382) 8.00 (203) 20.25 (514) 23.25 (591) 6.62 (168)
12 x 6
(300 x 150)32.3 (820) 29.0 (737) 30.5 (775) - - - - 12.56 (319) 17.72 (450) 8.00 (203) 20.25 (514) 23.25 (591) 6.62 (168)
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 81/104
Types 1098-EGR and 1098H-EGR
Pressure Reducing Regulators
81
AIR P RODUCTS
Ordering Guide
- continued -
Main Valve Spring (Select One)
Maximum Differential and Spring Color
20 psi (1,4 bar), Yellow**
60 psi (4,1 bar), Green***
125 psi (8,6 bar), Blue***
400 psi (27,6 bar), Red***
Actuator Size and Outlet Pressure Range (Select One)
Type 1098 Size 40, maximum set pressure 75 psig (5,2 bar) (standard)
2-inches w.c. to 2 psig (5 to 138 mbar)***
2 to 10 psig (138 mbar to 0,7 bar)***
3 to 40 psig (207 mbar to 2,8 bar)***
35 to 75 psig (2,4 to 5,2 bar)***
Type 1098 Size 30, maximum set pressure 100 psig (6,9 bar)
2-inches w.c. to 2 psig (5 to 138 mbar)**
2 to 10 psig (138 mbar to 0,7 bar)**
3 to 40 psig (207 mbar to 2,8 bar)**
35 to 100 psig (2,4 to 6,9 bar)**
Type 1098 Size 70, maximum set pressure 50 psig (3,4 bar)
2-inches w.c. to 2 psig (5 to 138 mbar)**
2 to 10 psig (138 mbar to 0,7 bar)**
3 to 40 psig (207 mbar to 2,8 bar)**
25 to 50 psig (1,7 to 3,4 bar)**
Type 1098H Size 30H, maximum set pressure 300 psig (20,7 bar)
2 to 10 psig (138 mbar to 0,7 bar)**
3 to 40 psig (207 mbar to 2,8 bar)**
35 to 125 psig (2,4 to 8,6 bar)**
85 to 200 psig (5,9 to 13,8 bar)**
175 to 220 psig (12,1 to 15,2 bar)**
200 to 300 psig (13,8 to 20,7 bar)**
Main Valve Body Size (Select One)
1-inch (DN 25)
2-inch (DN 50)
3-inch (DN 80)
4-inch (DN 100)
6-inch (DN 150)
8 x 6-inch (DN 200 x 150) (Not available in Cast Iron)
12 x 6-inch (DN 300 x 150) (Not available in Cast Iron)
Cage and Cage Material (Select One)
CF8M Stainless steel linear cage***
416 Stainless steel Whisper Trim® cage***
316 Stainless steel Whisper Trim® cage**
ENC Coated cast iron quick opening cage***
Actuator and Bonnet Material (Select One)
Steel casing with steel bonnet***
Stainless steel casing with Stainless steel bonnet**
Body Flange Material (Select One)
ENC Coated cast iron***
ENC Coated steel***
ENC Coated CF8M Stainless steel**
Plug and Seat Ring (Select One)
416 Stainless steel***
316 Stainless steel**
Main Valve Body and End Connection Style (Select One)
Cast Iron Body
NPT (1 and 2-inch only)***
CL125 FF***
CL250 RF***
WCC Steel Body
NPT (1 or 2-inch only)***
CL150 RF***
CL300 RF***
CL600 RF*
BWE*
SWE (1 and 2-inch only)*
PN 16/25/40*
CF8M Stainless Steel
NPT (1 or 2-inch only)**
CL150 RF**
CL300 RF**
CL600 RF* BWE*
SWE (1 or 2-inch only)*
PN 16/25/40*
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 82/104
Types 1098-EGR and 1098H-EGR
Pressure Reducing Regulators
82
AIR P RODUCTS
Specication Worksheet
Application:
Specic Use
Line Size
Fluid Type
Specic Gravity
Temperature
Does the Application Require Overpressure Protection?
Yes No
Pressure:
Maximum Inlet Pressure
Minimum Inlet Pressure
Differential Pressure
Set Pressure
Maximum Flow
Accuracy Requirements:
Less Than or Equal To:
5% 10% 20% 40%
Construction Material Requirements (if known):
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your local
Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your local
Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
Ordering Guide (continued)
Diaphragm, O-rings, and Other Elastomers (Select One)
Nitrile (NBR)***
Fluoroelastomer (FKM)***
Ethylenepropylene (EPDM)**
Tubing and Fittings (Select One)
Stainless steel tubing and steel plated ttings*** Stainless steel tubing and ttings**
Main Valve Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match this order.
Actuator Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match this order.
Pilot Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match this order.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 83/104
1301 Series Instrument Supply Regulators
83
AIR P RODUCTS
Introduction
The Types 1301F and 1301G direct-operated
regulators are used for numerous high-
pressure applications with inlet pressures
up to 6000 psig (414 bar). These regulators
are available in brass or stainless steel
construction. Their rugged design offers
versatility for a wide range of applications.
Body Sizes and End Connection Styles
1/4-inch threaded NPT
Flow Coefficients
Wide-Open Cg: 5.0
Wide-Open Cv: 0.13
C1: 38.5
K m: 0.72
IEC Sizing Coefficients
XT: 0.94
FD: 0.50
FL: 0.85
Pressure Registration
Internal
Maximum Inlet Pressure
6000 psig (414 bar)
Maximum Emergency Outlet Pressures
Type 1301F: 250 psig (17,2 bar)
Type 1301G: 550 psig (37,9 bar)
Outlet Pressure Ranges
Type 1301F: 10 to 225 psig (0,7 to 15,5 bar)
in three ranges
See Table 2
Type 1301G: 200 to 500 psig (13,8 to 34,5 bar)See Table 3
Temperature Capabilities
Nylon Valve Disk and Neoprene Gaskets:
-20° to 180°F (-29° to 82°C)
Polytetrauoroethylene (PTFE) Valve Disk
and Fluoroelastomer (FKM) Gaskets:
-20° to 400°F (-29° to 204°C)
PTFE Valve Disk and Ethylenepropylene
(EPDM) Gaskets:
-40° to 300°F (-40° to 149°C)
Additional Technical Data
For more technical information, contact
your local Sales Ofce or log on to:
www.emersonprocess.com/regulators • Durable Stainless
Steel Diaphragm
• Spare Valve Disk Provided
• ANSI Class VI Shutoff
• Sour Gas Service Capability
Figure 1. Type 1301F
Instrument Supply Regulator
Figure 2. Type 1301F Operational Schematic
Table 1. Construction Materials
BODYBOTTOM CAP AND
SPRING CASEORIFICE
ORIFICE
YOKEGASKETS
VALVE
SPRING
VALVE DISKS
AND HOLDERDIAPHRAGM
Brass Brass303
Stainless steelBrass
Neoprene,
Fluoroelastomer (FKM),
or Ethylenepropylene
(EPDM)
302
Stainless steel
Nylon and zinc-plated
brass or PTFE and
zinc-plated brass
302
Stainless steel
316
Stainless steel 316 Stainless steel303
Stainless steel
316
Stainlesssteel
Neoprene,
Fluoroelastomer (FKM),
or Ethylenepropylene
(EPDM)
302
Stainless steel
Nylon and 316
Stainless steel or
PTFE and
316 Stainless steel
302
Stainless steel
P1025
M1015
Features
INLET PRESSURE
OUTLET PRESSURE
ATMOSPHERIC PRESSURE
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 84/104
1301 Series Instrument Supply Regulators
84
AIR P RODUCTS
Table 2. Type 1301F Capacities
OUTLET PRESSURE
RANGE, SPRING PART
NUMBER, AND COLOR,
PSIG (bar)
OUTLET
PRESSURE
SETTING,
PSIG (bar)
CAPACITIES IN SCFH (Nm3 /h) OF AIR
Inlet Pressure, Psig (bar)
100 (6,9) 250 (17,2) 500 (34,5) 750 (51,7)
10% Droop 20% Droop 10% Droop 20% Droop 10% Droop 20% Droop 10% Droop 20% Droop
10 to 75 psig
(0,7 to 5,2 bar)
1D387227022
Blue
25 (1,7)
50 (3,4)
75 (5,2)
190 (5,09)
280 (7,50)
250 (6,7)
290 (7,77)
400 (10,7)
400 (10,7)
300 (8,04)
480 (12,9)
600 (16,1)
480 (12,9)
800 (21,4)
900 (24,1)
400 (10,7)
720 (19,3)
900 (24,1)
650 (17,4)
1000 (26,8)
1400 (37,5)
500 (13,4)
840 (22,5)
1000 (26,8)
750 (20,1)
1200 (32,2)
1600 (42,9)
50 to 150 psig
(3,4 to 10,3 bar)
1B788527022
Silver
75 (5,2)150 (10,3)
200 (5,36)- - - -
350 (9,38)- - - -
500 (13,4)750 (20,1)
800 (21,4) 1000 (26,8)
800 (21,4) 1100 (29,5)
1300 (34,8)1800 (48,2)
950 (25,5) 1450 (38,9)
1500 (40,2)2300 (61,6)
100 to 225 psig
(6,9 to 15,5 bar)
1D465127142
Red
150 (10,3)
225 (15,5)
- - - -
- - - -
- - - -
- - - -
650 (17,4)
500 (13,4)
900 (24,1)
800 (21,4)
1000 (26,8)
1400 (37,5)
1700 (45,6)
2100 (56,3)
1350 (36,2)
1900 (50,9)
2200 (59,0)
2900 (77,7)
- continued -
Table 2. Type 1301F Capacities (continued)
OUTLET PRESSURE
RANGE, SPRING PART
NUMBER, AND COLOR,PSIG (bar)
OUTLET
PRESSURE
SETTING,PSIG (bar)
CAPACITIES IN SCFH (Nm3 /h) OF AIR
Inlet Pressure, Psig (bar)
1000 (69) 1500 (103) 2000 (138)
10% Droop 20% Droop 10% Droop 20% Droop 10% Droop 20% Droop
10 to 75 psig
(0,7 to 5,2 bar)
1D387227022
Blue
25 (1,7)
50 (3,4)
75 (5,2)
520 (13,9)
900 (24,1)
1100 (29,5)
770 (20,6)
1300 (34,8)
1700 (45,6)
540 (14,5)
950 (25,5)
1200 (32,2)
800 (21,4)
1400 (37,5)
1800 (48,2)
560 (15,0)
1000 (26,8)
1300 (34,8)
820 (22,0)
1500 (40,2)
1900 (50,9)
50 to 150 psig
(3,4 to 10,3 bar)
1B788527022
Silver
75 (5,2)
150 (10,3)
1000 (26,8)
1600 (42,9)
1600 (42,9)
2600 (69,7)
1100 (29,5)
1700 (45,6)
1700 (45,6)
2800 (75,0)
1200 (32,2)
1800 (48,2)
1800 (48,2)
3000 (80,4)
100 to 225 psig
(6,9 to 15,5 bar)
1D465127142
Red
150 (10,3)
225 (15,5)
1500 (40,2)
2400 (64,3)
2250 (60,3)
3500 (93,8)
1650 (44,2)
2700 (72,4)
2750 (73,7)
4000 (107)
1800 (48,2)
3000 (80,4)
3000 (80,4)
4500 (121)
Table 3. Type 1301G Capacities
OUTLET PRESSURE
RANGE, SPRING
PART NUMBER,
AND COLOR
OUTLET
PRESSURE
SETTING,
PSIG (bar)
OFFSET,
PSIG (bar)
CAPACITIES IN SCFH (Nm3 /h) OF AIR
Inlet Pressure, Psig (bar)
300 (20,7) 500 (34,5) 750 (51,7) 1000 (68,9) 1500 (103) 2000 (138) 2250 (155)
200 to 500 psig
(13,8 to 34,5 bar)
1K156027142
Silver
200 (13,8)
10 (0,7)
20 (1,4)
30 (2,1)
40 (2,8)
350 (9,38)
650 (17,4)
900 (24,1)
1100 (29,5)
550 (14,7)
900 (24,1)
1350 (36,2)
1650 (44,2)
750 (20,1)
1200 (32,2)
1700 (45,6)
2100 (56,3)
950 (25,5)
1500 (40,2)
2000 (53,6)
2500 (67)
1100 (29,5)
1800 (48,2)
2300 (61,6)
3000 (80,4)
1250 (33,5)
2000 (53,6)
2700 (72,4)
3500 (93,8)
1400 (37,5)
2100 (56,3)
3000 (80,4)
3700 (99,2)
500 (34,5)
15 (1,0)
25 (1,7)
50 (3,4)
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
800 (21,4)
1400 (37,5)
2200 (59,0)
1000 (26,8)
1600 (42,9)
2800 (75,0)
1300 (34,8)
2000 (53,6)
3300 (88,4)
1500 (40,2)
2600 (69,7)
4000 (107)
1600 (42,9)
2800 (75,0)
4500 (121)
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 85/104
1301 Series Instrument Supply Regulators
85
AIR P RODUCTS
Table 4. Dimensions and Shipping Weights
TYPE BODY MATERIAL
DIMENSIONS, INCHES (mm) APPROXIMATE
SHIPPING WEIGHTS,
POUNDS (kg)A B
1301FBrass 3.38 (85,9) 1.69 (42,9)
8 (3,6)Stainless steel 3.62 (91,9) 1.75 (44,5)
1301GBrass 3.38 (85,9) 1.69 (42,9)
8 (3,6)Stainless steel 3.62 (91,9) 1.75 (44,5)
INCHES(mm)
Figure 3. Dimensions
2.75 Ø
(69,9)
4.19 (106)
MAXIMUM
B
A
OPTIONAL
HANDWHEEL
OPTIONAL 1/4-INCH NPTVENT CONNECTION
1/4-INCH NPTSUPPLY CONNECTION
1/4-INCH NPT OPTIONALOUTPUT CONNECTION
3.75 (95,3)
MAXIMUM
1.88
(47,8)
3.50 Ø
(88,9)
B
B
A
3.50 Ø(88,9)
B
5.00 Ø(127)
4.62 (117)MAXIMUM
1.88
(47,8)
1/4-INCH NPT OPTIONALOUTPUT CONNECTION
1/4-INCH NPT
SUPPLY CONNECTION
TYPE 1301F
TYPE 1301G
1/8-INCH NPTVENT CONNECTION
OPTIONAL
TEE HANDLE
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 86/104
1301 Series Instrument Supply Regulators
86
AIR P RODUCTS
Ordering Guide
Type (Select One)
1301F
10 to 75 psig (0,7 to 5,2 bar)***
50 to 150 psig (3,4 to 10,3 bar)***
100 to 225 psig (6,9 to 15,5 bar)***
1301G
200 to 500 psig (13,8 to 34,5 bar)***
Body and Spring Case Materials (Select One)
Brass***
Stainless steel**
Valve Disk (Select One)
Nylon***
PTFE**
Gaskets (Select One)
Neoprene***
Fluoroelastomer (FKM)**
Ethylenepropylene (EPDM)*
Replacement Parts Kit (Optional)
Yes, send one replacement parts kit to match this order.
Specication Worksheet
Application:
Specic Use
Line Size
Fluid Type
Specic GravityTemperature
Does the Application Require Overpressure Protection?
Yes No
Pressure:
Maximum Inlet Pressure
Minimum Inlet Pressure
Differential Pressure
Set Pressure
Maximum Flow
Accuracy Requirements:
Less Than or Equal To:
5% 10% 20% 40%
Construction Material Requirements (if known):
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your local
Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your local
Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 87/104
Type 1367 High-Pressure Instrument Supply System
87
AIR P RODUCTS
Table 1. Construction Materials
TYPE 252 FILTER TYPE 1301F REGULATOR TYPE H120 RELIEF VALVE TYPE 67CF REGULATOR TYPE H800 RELIEF VALVE
Part Material Part Material Part Material Part Material Part Material
Body AluminumBody and
Spring CaseBrass Disk Nitrile (NBR)
Body and
Spring Case Aluminum
Body and
Spring Case Aluminum
Filter Cartridge Polyethylene Disk olytetrauoroethylene
(PTFE)
Spring
and PinStainless steel
Diaphragm
and Plug
Nitrile (NBR) or
Fluoroelastomer (FKM)Diaphragm Nitrile (NBR)
O-rings Nitrile (NBR) GasketsNeoprene and
Fluoroelastomer (FKM)
Body Brass
StemBrass or
Stainless steel
Other PartsSteel and
Stainless steel
Drain Valve316
Stainless steelOther Parts
Brass and
Stainless steel
Filter
Cellulose or
Stainless steel
Other PartsBrass, Polyester resin,
Steel, and Stainless steel
Introduction
The Type 1367 high-pressure instrument supply
system takes a pressure of up to 2000 psig
(138 bar) and reduces it to a controlled pressure
to be used for supplying a pneumatic instrument.
This system consists of lters, regulators, and
relief valves as follows:
1. A Type 252 extended body lter
with drain valve.
2. A rst-stage Type 1301F regulator, with
mounting bracket for an actuator yokeor casing.
3. A Type H120 relief valve, mounted in the
side outlet of the Type 1301F regulator.
4. A second-stage Type 67CF
lter-style regulator, mounted on the
Type 1301F regulator.
5. A Type H800 relief valve, nipple-mounted
in the outlet of the Type 67CF regulator.
Pressure Registration
Internal
Maximum Inlet Pressure
2000 psig (138 bar)
Outlet (Supply) Pressure Range
5 to 35 psig (0,3 to 2,4 bar)
Temperature Capabilities
-20° to 150°F (-29° to 66°C)
Approximate Weight
12 pounds (5,4 kg)
Additional Technical Data
For more technical information, contact
your local Sales Ofce or log on to:
www.emersonprocess.com/regulators
Figure 1. Type 1367 High-Pressure
Instrument Supply System
Figure 2. Dimensions
INCHES
(mm)
39A3365_B
Features
• Regulation and Overpressure
Protection in One Complete Package
• Installation Flexibility
• Capability for Continuous
Moisture Removal
• NACE Capabilities
1.15(29)
2.00(50,8)
9.22(234)
2.00
(50,8)
9.9(251)
4.93
(125)
W8649
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 88/104
Type 1367 High-Pressure Instrument Supply System
88
AIR P RODUCTS
Ordering Guide
Specication Worksheet
Application:
Specic Use
Line Size
Fluid TypeSpecic Gravity
Temperature
Does the Application Require Overpressure Protection?
Yes No
Pressure:
Maximum Inlet Pressure
Minimum Inlet Pressure
Differential Pressure
Set Pressure
Maximum Flow
Accuracy Requirements:
Less Than or Equal To:
5% 10% 20% 40%
Construction Material Requirements (if known):
Type 1367 (Select)
Specify quantity
Mounting (Select One)
Yoke***
Casing***
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your local
Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your local
Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 89/104
Type 2625 Volume Booster
89
AIR P RODUCTS
Introduction
The Type 2625 volume booster is used in
conjunction with a positioner on a throttling
control valve to increase stroking speed.
End Connection Sizes and Styles
Input Signal: 1/4-inch threaded NPT
Supply and Output: 3/4-inch threaded NPT
Flow Coefficients
See Table 2
Fixed Input to Output Pressure Ratio
1 to 1
Port Diameters
Supply Port: 3/8 or 1/2-inch (9,5 or 12,7 mm)
Exhaust Port: 3/32, 3/8, or 1/2-inch
(2,4; 9,5; or 12,7 mm)
Approximate Shipping Weights
Aluminum Body: 5 pounds (2,3 kg)
Brass Body: 11 pounds (5 kg)
Input Signal Pressure
Maximum: 150 psig (10,3 bar)
Normal: Positioner Output
Supply Pressure Ranges
When Normally Used With Diaphragm
Actuators: Up to 40 psig (2,8 bar)
When Normally Used With Piston
Actuators: Up to 150 psig (10,3 bar)
Nominal Deadband
Percent of Positioner Output Span:3/32-inch (2,4 mm) exhaust port: 2%
3/8-inch (9,5 mm) exhaust port: 3.5%
1/2-inch (12,7 mm) exhaust port: 5%
Temperature Capability
-40° to 160°F (-40° to 71°C)
Additional Technical Data
For more technical information, contact
your local Sales Ofce or log on to:
www.emersonprocess.com/regulators
Figure 1. Type 2625 Volume Booster
W4727
Features
• Fast Response
• Adjustable Response
• Efcient Operation
• Maintains Accuracy
Table 1. Construction Materials
BODY SEAT RING DIAPHRAGMSUPPER AND
LOWER PLUG VALVESO-RINGS
Aluminum
or BrassBrass
Nitrile (NBR)/
Nylon
Nitrile-Hypalon rubber/ Aluminum/
Stainless steel
Nitrile
(NBR)
Figure 2. Type 2625 Operational Schematic
INLET PRESSURE
OUTLET PRESSURE
LOADING PRESSURE
M1040
Table 2. Maximum Flow Coefcients
ORIFICE SIZE COMBINATIONS,
INCHES (mm)
SUPPLY ORIFICE
COEFFICIENTS
EXHAUST ORIFICE
COEFFICIENTS
Supply Orice Exhaust Orice Cv
Cg
C1
Cv
Cg
C1
3/8 (9,5)
3/32
3/8
1/2
(2,4)
(9,5)
(12,7)
3.74
3.74
3.74
113
113
113
30.2
30.2
30.2
0.23
2.29
2.52
8.05
80.2
88.2
35.0
35.0
35.0
1/2 (12,7)
3/32
3/8
1/2
(2,4)
(9,5)
(12,7)
4.98
4.98
4.98
160
160
160
32.1
32.1
32.1
0.24
2.30
2.72
8.43
80.7
95.4
35.0
35.0
35.0
Type 3570 Valve Positioner 0.25 8.8 35.2 0.25 8.8 35.2
Type 3582 Valve Positioner 0.17 6.0 35.3 0.19 6.65 35.0
Types 3610J, 3610JP, 3611JP,
3620J, 3620JP, and 3621JP0.37 13.0 35.0 0.30 10.5 35.0
Table 3. Dimensions
DIMENSIONS, INCHES (mm)
A B C D E
4.38 (111) 4.75 (121) 1.88 (48) 2.38 (60) 0.84 (21)
A
C
B
D
E1/4-INCH NPT
INPUT CONNECTION
9 EXHAUST HOLES
0.28 (7) DIAMETER
3/4-INCH NPT
SUPPLY CONNECTION
3/4-INCH NPT OUTPUT
TO ACTUATOR
Figure 3. Dimensions
A0807
INCHES
(mm)
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 90/104
Type 2625 Volume Booster
90
AIR P RODUCTS
Specication Worksheet
Application:
Specic Use
Line Size
Fluid Type
Specic GravityTemperature
Does the Application Require Overpressure Protection?
Yes No
Pressure:
Maximum Inlet Pressure
Minimum Inlet Pressure
Differential Pressure
Set Pressure
Maximum Flow
Accuracy Requirements:
Less Than or Equal To:
5% 10% 20% 40%
Construction Material Requirements (if known):
Ordering Guide
Body Material (Select One)
Aluminum***
Brass**
Supply Port Size (Select One)
3/8-inch (9,5 mm)***
1/2-inch (12,7 mm)**
Exhaust Port Size (Select One)
3/32-inch (2,4 mm)**
3/8-inch (9,5 mm)***
1/2-inch (12,7 mm)***
Maximum Supply Pressure (Select One)
40 psig (2,8 bar)
150 psig (10,3 bar)
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your local
Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your local
Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 91/104
H120 Series Relief Valve
91
AIR P RODUCTS
Introduction
The H120 Series relief valves are available
in nine factory set relief pressure settings.
These pop style relief valves are commonly
used in pneumatic lines of air drills,
jackhammers, and other similar equipment.
Body Size and End Connection Style
1/4-inch threaded NPT
Wide-Open Flow Coefficient
Cg: 80
K m: 0.79
IEC Sizing Coefficients
XT: 0.78
FD: 0.50
FL: 0.89
• Space-Saving Construction
• Economical
• Durable
• Optional Protective Cap
Maximum Allowable Relief
(Inlet) Pressure
420 psig (29 bar)
Fixed Relief Pressures
35 to 350 psig (2,4 to 24,1 bar)
in nine xed settings
See Table 2
Approximate Shipping Weight
0.25 pound (0,1 kg)
Temperature Capabilities
-20° to 160°F (-29° to 71°C)
Additional Technical Data
For more technical information, contact
your local Sales Ofce or log on to:
www.emersonprocess.com/regulators
Table 1. Construction Materials
BODY, POPPET, AND
SPRING RETAINERDISK
SPRING AND
RETAINER PIN
Brass Nitrile (NBR) Stainless steel
Table 2. Relief Pressures and Capacities
FIXED RELIEF
PRESSURE
SETTING,
PSIG (bar)
BUILDUP OVER
RELIEF PRESSURE
SETTING,
PSIG (bar)
CAPACITIES IN
SCFH (Nm3 /h)
OF AIR
SPRING PART
NUMBER AND
COLOR
35
60
(2,4)
(4,1)
25
25
(1,7)
(1,7)
4650
6336
(125)
(170)
T1217837022
Yellow
120 (8,3) 25 (1,7) 9939 (266)T12687T0012
Orange
150
175
(10,3)
(12,1)
30
35
(2,1)
(2,4)
11 540
13 485
(309)
(361)
T12688T0012
Brown
200
225
275
350
(13,8)
(15,5)
(19,0)
(24,1)
40
45
55
70
(2,8)
(3,1)
(3,8)
(4,8)
15 771
16 856
18 232
26 784
(423)
(452)
(489)
(718)
1F790837022
Black
Figure 1. Type H120 Relief Valve
W4107
0.84(21)
RETAINER
PIN
1.35
(34)
INCHES(mm)
Figure 3. Dimensions
AF6126-H A3283
Features
Figure 2. Type H120 Operational Schematic
M1052
INLET PRESSURE
ATMOSPHERIC PRESSURE
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 92/104
H120 Series Relief Valve
92
AIR P RODUCTS
Ordering Guide
Fixed Relief Pressure Setting (Select One)
35 psig (2,4 bar)***
60 psig (4,1 bar)***
120 psig (8,3 bar)***
150 psig (10,3 bar)***
175 psig (12,1 bar)***
200 psig (13,8 bar)***
225 psig (15,5 bar)***
275 psig (19 bar)**
350 psig (24,1 bar)**
Other Start-to-Discharge Point (Optional)
Designate desired setpoint in multiples of 5 psig (0,3 bar)
Quantity
Specication Worksheet
Application:
Specic Use
Line Size
Fluid Type
Specic GravityTemperature
Does the Application Require Overpressure Protection?
Yes No
Pressure:
Maximum Inlet Pressure
Minimum Inlet Pressure
Differential Pressure
Set Pressure
Maximum Flow
Accuracy Requirements:
Less Than or Equal To:
5% 10% 20% 40%
Construction Material Requirements (if known):
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your local
Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your
local Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 93/104
Type H200 Relief Valve
93
AIR P RODUCTS
Introduction
The Type H200 relief valve is available in
several factory set relief pressure settings. These
pop style relief valves are commonly used in
pneumatic lines of air drills, jackhammers, and
other similar equipment.
Body Styles and End Connections
Type H202: 3/4-inch threaded NPT
Type H203: 1-inch threaded NPT
Wide-Open Flow CoefficientC
g: 405
IEC Sizing Coefficient
XT: 0.78
FD: 0.50
FL: 0.89
K m: 0.79
Maximum Allowable Relief (Inlet) Pressure
400 psig (27,6 bar)
Relief Pressure Settings
25 to 300 psig (1,7 to 20,7 bar)
in twelve settings
See Table 2
Temperature Capabilities
-20° to 160°F (-29° to 71°C)
Approximate Shipping Weight0.5 pounds (0,2 kg)
Additional Technical Data
For more technical information, contact
your local Sales Ofce or log on to:
www.emersonprocess.com/regulators
Table 1. Construction Materials
BODY, POPPET, AND
SPRING RETAINERDISK SPRING
Brass Nitrile (NBR) 302 Stainless steel
Table 2. Relief Set Pressures and CapacitiesRELIEF SETTING
TOLERANCE,
PSIG (bar)
RELIEF SET
PRESSURE,
PSIG (bar)
SET PRESSURE
PLUS BUILDUP,
PSIG (bar)
CAPACITIES IN SCFH
(Nm³/h) OF AIR
± 5 �± 0,34
25 (1,7)
50 (3,4)
75 (5,2)
100 (6,9)
125 (8,6)
50 (3,4)
75 (5,2)
100 (6,9)
120 (8,3)
150 (10,3)
26 505 (710)
36 735 (984)
46 500 (1246)
53 940 (1446)
64 635 (1732)
± 8 �± 0,6
150 (10,3)
175 (12,1)
200 (13,8)
225 (15,5)
250 (17,2)
180 (12,4)
210 (14,5)
240 (16,5)
270 (18,6)
300 (20,7)
77 888 (2087)
91 140 (2443)
102 300 (2742)
116 250 (3116)
127 875 (3427)
± 15 �± 1,0275 (19,0)
300 (20,7)
330 (22,8)
360 (24,8)
139 500 (3739)
151 125 (4050)
Figure 1. H200 Series Relief Valve
W1929_1
Features
• Space-Saving Construction
• Economical • Durable
• Protective Cap
Figure 3. H200 Series Dimensions
AE8234
Figure 2. H200 Series Operational Schematic
M1053
INCHES
(mm)
3.06(77,7)
1.75(44,5)
INLET PRESSURE
ATMOSPHERIC PRESSURE
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 94/104
Type H200 Relief Valve
94
AIR P RODUCTS
Ordering Guide
Body Size (Select One)
3/4-inch***
1-inch***
Fixed Relief Pressure Setting (Select One)
3/4-inch
25 psig (1,7 bar)***
30 psig (2,1 bar)***
35 psig (2,4 bar)***
50 psig (3,4 bar)***
75 psig (5,2 bar)***
250 psig (17,2 bar)***
1-inch
25 psig (1,7 bar)***
35 psig (2,4 bar)***
50 psig (3,4 bar)***
60 psig (4,1 bar)***
75 psig (5,2 bar)***
100 psig (6,9 bar)***
125 psig (8,6 bar)***
150 psig (10,3 bar)***
175 psig (12,1 bar)***
200 psig (13,8 bar)***
250 psig (17,2 bar)***
300 psig (20,7 bar)***
Specication Worksheet
Application:
Specic Use
Line Size
Fluid Type
Specic GravityTemperature
Does the Application Require Overpressure Protection?
Yes No
Pressure:
Maximum Inlet Pressure
Minimum Inlet Pressure
Differential Pressure
Set Pressure
Maximum Flow
Accuracy Requirements:
Less Than or Equal To:
5% 10% 20% 40%
Construction Material Requirements (if known):
Other Start-to-Discharge Point (Optional)
Designate desired setpoint in multiples of 5 psig (0,3 bar)
Type P145 Rain Cap (Optional)
Yes
Quantity
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your local
Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your local
Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 95/104
Type H800 Relief Valves
95
AIR P RODUCTS
Introduction
The Type H800 relief valve is a compact,
lightweight, direct-operated relief valve.
It is used primarily between a pneumatic
instrument and its supply pressure
regulator to limit the instrument supply
pressure to 50 psig (3,4 bar) should the
supply pressure regulator fail to close.
Body Size and End Connection Style
1/4-inch threaded NPT
Flow Coefficient
Wide-Open Cg: 55
K m: 0.79
IEC Sizing Coefficient
XT: 0.775
FD: 0.50
FL: 0.89
Maximum Allowable Inlet
(Relief) Pressure
250 psig (17,2 bar)
Relief Pressure Range
Non-adjustable, start-to-discharge between
39 to 44 psig (2,7 to 3,0 bar)
Reseat Pressure
35 psig (2,4 bar) or higher
Temperature Capabilities
-20° to 150°F (-29° to 66°C)
Approximate Shipping Weight
5 ounces (140 grams)
Additional Technical Data
For more technical information, contact
your local Sales Ofce or log on to:
www.emersonprocess.com/regulators
Figure 1. Type H800 Relief Valve
FROM SUPPLY
REGULATOR TO INSTRUMENT
RELIEF DISCHARGE
Figure 2. Type H800 Operational Schematic
1/4-INCH NPT
1.00(25)
2.00
(51)
1/2 NPT
1.38
(35)
1/4 NPT
3.12
(79)
INCHES(mm)
Figure 4. Dimensions
Table 1. Construction MaterialsBODY AND
SPRING CASESPRING CUP DIAPHRAGM DIAPHRAGM DISK SPRING
DISK RESTRICTION
AND SCREEN
INTERNAL
RETAINING RING
Aluminum Valox® 730 plastic Nitrile (NBR) Zinc-plated steel Plated steel Stainless steel Plated steel
W3618
M1034
A2900
Features
• Application Dependability
• Easy Installation
• Economical
• Tamper-Resistant
Figure 3. Relief Capacities
AIR FLOW, SCFH (14.7 PSIA AT 60°F)
AIR FLOW, Nm³/h (1,01 bar ABSOLUTE AT 0°C)
4.0
3.0
2.0
1.0
0
I N L E T P R E S S U R E T O R E L I E F V A L V E , b a r60
50
40
30
20
10
0
I N L E T P R E S S U R E T O
R E L I E F V A L V E , P S I G
START-TO-DISCHARGERANGE
MINIMUM RESEAT
RELIEF PERFORMANCE 1/4-INCH TYPE H800
RELIEF VALVE WITH VENT SCREEN AND DISKRESTRICTION NON-ADJUSTABLE SETPOINT
6050403020100 70 80 90 100 110
24002000160012008004000 2800 3200 3600 4000
INLET PRESSUREATMOSPHERIC PRESSURE
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 96/104
Type H800 Relief Valves
96
AIR P RODUCTS
Ordering Guide
Type H800 (Select)
Specify quantity
Factory Mounted
Do you want this relief valve factory mounted on a
67C Series Instrument Supply Regulator?
Yes. If so, also complete the Ordering Guide
for the 67C Series regulator.
No
Specication Worksheet
Application:
Specic Use
Line Size
Gas Type and Specic Gravity
Gas TemperatureDoes the Application Require Overpressure Protection?
Yes No If yes, which is preferred:
Relief Valve Monitor Regulator Shutoff Device
Is overpressure protection equipment selection assistance
desired?
Pressure:
Maximum Inlet Pressure (P1max
)
Minimum Inlet Pressure (P1min
)
Downstream Pressure Setting(s) (P2)
Maximum Flow (Qmax
)
Performance Required:
Accuracy Requirements?
Need for Extremely Fast Response?Other Requirements:
Regulators Quick Order Guide
* * * Readily Available for Shipment
* * Allow Additional Time for Shipment
*Special Order, Constructed from Non-Stocked Parts. Consult your
local Sales Ofce for Availability.
Availability of the product being ordered is determined by the component with the
longest shipping time for the requested construction.
To order this product, complete this page or complete
the Specication Worksheet and forward to your local
Sales Ofce.
If the construction you need is not offered on this page,
contact your local Sales Ofce.
To locate your local Sales Ofce log on to:
www.emersonprocess.com/regulators
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 97/104
Y600A Series Pressure Reducing Regulators
97
AIR P RODUCTS
Introduction
The Y600A Series self-operated, spring-
loaded regulators provide economical
pressure reducing control in a variety of
commercial and industrial applications.
The large diaphragm area provides more
accurate control at low-pressure settings,
and the pitot tube of the Type Y600A or
Y600AR regulator also creates a dynamic
boost that helps provide greater capacity.
The Type Y600A features internal
registration. The Type Y600AR hasinternal registration and relief. The
Type Y600AM uses external registration
with a 1/2-inch threaded NPT
downstream control line connection and
an O-ring stem seal.
Body Sizes and End Connection Styles
3/4 or 1-inch threaded NPT
Flow and Sizing Coefficients
See Table 2
Pressure Registration
Internal or External
Maximum Inlet Pressure
150 psig (10,3 bar)
See Table 2
Maximum Outlet (Casing) Pressure
20 psig (1,4 bar)
Outlet (Control) Pressure Ranges
4-inches w.c. to 7 psig
(10 mbar to 0,5 bar) in 6 ranges
See Table 3
Temperature Capabilities-20° to 180°F (-29° to 82°C)
Additional Technical Data
For more technical information, contact
your local Sales Ofce or log on to:
www.emersonprocess.com/regulatorsFigure 1. Type Y600A or Y600AR
Pressure Reducing Regulator
Figure 2. Type Y600A Pressure Reducing Regulator
Operational Schematic
• Corrosion Resistance
• Tamper-Resistant Adjustment
• Ease of Inspection and Maintenance
• Precision Control at
Low-Pressure Settings
Table 1. Construction Materials
BODY, DIAPHRAGM
CASING, AND
SPRING CASE
ORIFICE
SPRING, DIAPHRAGM
HEAD, AND
LEVER ASSEMBLY
DIAPHRAGM
AND DISK
PUSHER POST AND
ADJUSTING SCREWDISK HOLDER CLOSING CAP STEM
Cast iron Aluminum Plated steel Nitrile (NBR)
Types Y600A and
Y600AM: Aluminum
Type Y600AR: Zinc
Aluminum Thermoplastic Stainless steel
W7095
B2622
ATMOSPHERIC PRESSURE
INLET PRESSURE
OUTLET PRESSURE
Features
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 98/104
Y600A Series Pressure Reducing Regulators
98
AIR P RODUCTS
Table 2. Maximum Operating Inlet Pressures and Coefcients
ORIFICE SIZE,
INCHES (mm)
MAXIMUM OPERATING INLET PRESSURE, PSIG (bar)
WIDE-OPEN FLOW
COEFFICIENTS FOR
EXTERNAL RELIEF SIZING
IEC SIZING COEFFICIENT
With 1.2 Psig
(0,08 bar) or
Less Outlet
Pressure Setting
With 1.2 to 2.5 Psig
(0,08 to 0,17 bar)
Outlet Pressure
Setting
With 2.5 to 4.5 Psig
(0,17 to 0,31 bar)
Outlet Pressure
Setting
With 4.5 to 7 Psig
(0,31 to 0,48 bar)
Outlet Pressure
Setting
Cg
Cv
C1
Km
XT
FD
FL
1/8
3/16
1/4
(3,2)
(4,8)
(6,4)
150
150
75
(10,3)
(10,3)
(5,2)
150
150
150
(10,3)
(10,3)
(10,3)
150
150
150
(10,3)
(10,3)
(10,3)
150
150
150
(10,3)
(10,3)
(10,3)
12.3
27.6
50
0.35
0.79
1.43
35
0.79 0.775 0.50 0.893/8
1/2
9/16
(9,5)
(12,7)
(14,3)
35
8
5
(2,4)
(0,55)
(0,34)
60
10
6
(4,1)
(0,69)
(0,41)
60
12
8
(4,1)
(0,83)
(0,55)
60
12
9
(4,1)
(0,83)
(0,62)
110
200
250
3.14
5.71
7.14
35
Table 3. Outlet (Control) Pressure Ranges
TYPESCONTROL
SPRING COLOR
CONTROL SPRING
PART NUMBER
OUTLET PRESSURE RANGE WITH SPRING CASE
ABOVE DIAPHRAGM(1)
APPROXIMATE POINT ABOVE PRESSURE
SETTING AT WHICH TYPE Y600AR INTERNAL
RELIEF STARTS TO DISCHARGE
Y600A, Y600AR, Y600AM
Red 1B653827052 4 to 8-inches w.c. (10 to 20 mbar) 10 to 24-inches w.c. (25 to 60 mbar)
Olive drab 1B653927022 7 to 16- inches w.c . (17 to 40 mbar)10 to 26-inches w.c. (25 to 65 mbar)
Yellow 1B537027052 15-inches w.c. to 1.2 psig (37 to 83 mbar)
Light green 1B537127022 1.2 to 2.5 psig (83 to 172 mbar) 0.5 to 2 psig (34 to 138 mbar)
Light blue 1B537227022 2.5 to 4.5 psig (172 mbar to 0,3 bar) 0.5 to 3 psig (34 to 207 mbar)
Black 1B537327052 4.5 to 7 psig (0,3 to 0,5 bar) 1 to 4 psig (69 to 276 mbar)
1. Minimum outlet pressure setting may be approximately 1-inch w.c. (2 mbar) lower if spring case is below diaphragm.
Figure 3. Types Y600AR and Y600AM Operational Schematics
TYPE Y600AR TYPE Y600AM
B2624
OUTLET PRESSURE
ATMOSPHERIC PRESSURE
INLET PRESSURE
B2623
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 99/104
Y600A Series Pressure Reducing Regulators
99
AIR P RODUCTS
- continued -
Table 4. Capacities for 3/4-inch Body
OUTLET PRESSURE
RANGE, CONTROL
SPRING PART NUMBER,
AND COLOR
OFFSET
FROM
SETPOINT
OUTLET
PRESSURE
SETTING
INLET
PRESSURE,
PSIG (bar)
Orice Size, Inches (mm)
Capacities in SCFH (Nm3 /h) of Air
1/8 (3,2) 3/16 (4,8) 1/4 (6,4) 3/8 (9,5) 1/2 (12,7) 9/16 (14,3)
4 to 8-inches w.c.
(10 to 20 mbar)
1B653827052
Red
1-inch w.c.
(2 mbar)
7-inches w.c.
(17 mbar)
1 (0,069) 69.8 (1,87) 132 (3,54) 178 (4,77) 194 (5,2) 318 (8,52) 341 (9,14)
5 (0,34) 171 (4,58) 217 (5,82) 349 (9,35) 380 (10,2) 403 (10,8) 752 (20,2)
8 (0,55) 178 (4,77) 372 (9,97) 411 (11,0) 419 (11,2) 457 (12,2)
20 (1,4) 403 (10,8) 465 (12,5) 481 (12,9) 504 (13,5)
35 (2,4) 512 (13,7) 519 (13,9) 651 (17,4) 698 (18,7)
75 (5,2) 597 (16,0) 651 (17,4) 744 (19,9)
150 (10,3) 1302 (34,9) 1790 (48,0)
7 to 16-inches w.c.
(17 to 40 mbar)
1B653927022
Olive drab
1-inch w.c.
(2 mbar)
11-inches
w.c.
(27 mbar)
1 (0,069) 69.8 (1,87) 101 (2,71) 124 (3,32) 147 (3,94) 178 (4,77) 194 (5,2)
5 (0,34) 124 (3,32) 194 (5,2) 217 (5,82) 271 (7,26) 411 (11,0) 581 (15,6)
8 (0,55) 132 (3,54) 271 (7,26) 333 (8,92) 349 (9,35) 419 (11,2)
20 (1,4) 271 (7,26) 380 (10,2) 457 (12,2) 473 (12,7)
35 (2,4) 403 (10,8) 411 (11,0) 481 (12,9) 504 (13,5)
75 (5,2) 504 (13,5) 512 (13,7) 729 (19,5)
150 (10,3) 1302 (34,9) 1597 (42,8)
15-inches w.c.
to 1.2 psig
(37 mbar to 83 mbar)
1B537027052
Yellow
5.5-inches w.c.
(14 mbar)
15-inches
w.c.
(37 mbar)
2 (0,14) 69.8 (1,87) 264 (7,08) 388 (10,4) 698 (18,7) 853 (22,9) 891 (23,9)
6 (0,41) 194 (5,2) 419 (11,2) 721 (19,3) 1271 (34,1) 1628 (43,6)
10 (0,69) 264 (7,08) 620 (16,6) 1070 (28,7) 1504 (40,3)
30 (2,1) 527 (14,1) 1124 (30,1) 1852 (49,6) 1899 (50,9)
60 (4,1) 899 (24,1) 1907 (51,1) 2697 (72,3)
150 (10,3) 1992 (53,4) 2100 (56,3)
1.2 psig
(83 mbar)
2 (0,14) 69,8 (1,87) 202 (5,41) 318 (8,52) 465 (12,5) 628 (16,8) 543 (14,6)
6 (0,41) 194 (5,2) 357 (9,57) 543 (14,6) 1000 (26,8) 1101 (29,5)
10 (0,69) 240 (6,43) 512 (13,7) 791 (21,2) 1101 (29,5)
30 (2,1) 519 (13,9) 859 (23,0) 1597 (42,8) 1883 (50,5)
60 (4,1) 884 (23,7) 1690 (45,3) 2596 (69,6)
150 (10,3) 1922 (51,5) 2054 (55,0)
- Blank areas indicate where maximum operating inlet pressure for a given orice is exceeded.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 100/104
Y600A Series Pressure Reducing Regulators
100
AIR P RODUCTS
Table 4. Capacities for 3/4-inch Body (continued)
OUTLET PRESSURE
RANGE, CONTROL
SPRING PART NUMBER,
AND COLOR
OFFSET
FROM
SETPOINT
OUTLET
PRESSURE
SETTING
INLET
PRESSURE,
PSIG (bar)
Orice Size, Inches (mm)
Capacities in SCFH (Nm3 /h) of Air
1/8 (3,2) 3/16 (4,8) 1/4 (6,4) 3/8 (9,5) 1/2 (12,7) 9/16 (14,3)
1.2 to 2.5 psig
(83 to 172 mbar)
1B537127022
Light green
0.2 psig
(14 mbar)
1.2 psig
(83 mbar)
2 (0,14) 93 (2,49) 132 (3,54) 171 (4,58) 271 (7,26) 380 (10,2) 403 (10,8)
6 (0,41) 140 (3,75) 264 (7,08) 349 (9,35) 574 (15,4) 659 (17,7) 829 (22,2)
10 (0,69) 147 (3,94) 341 (9,14) 457 (12,2) 783 (21) 907 (24,3)
30 (2,1) 434 (11,6) 698 (18,7) 1201 (32,2) 1333 (35,7)
60 (4,1) 667 (17,9) 860 (23,0) 1922 (51,5) 1814 (48,6)
150 (10,3) 1542 (41,3) 2697 (72,3) 2713 (72,7)
2.5 psig
(172 mbar)
6 (0,41) 109 (2,92) 147 (3,94) 202 (5,41) 349 (9,35) 457 (12,2) 527 (14,1)
10 (0,69) 132 (3,54) 264 (7,08) 380 (10,2) 442 (11,8) 667 (17,9)
30 (2,1) 333 (8,92) 512 (13,7) 760 (20,4) 798 (21,4)
60 (4,1) 581 (15,6) 659 (17,7) 1504 (40,3) 1744 (46,7)
150 (10,3) 1147 (30,7) 1798 (48,2) 2596 (69,6)
0.3 psig
(21 mbar)
2.5 psig
(172 mbar)
4 (0,28) 101 (2,71) 140 (3,75) 147 (3,94) 240 (6,43) 287 (7,69) 372 (9,97)
8 (0,55) 109 (2,92) 217 (5,82) 279 (7,48) 403 (10,8) 550 (14,7) 620 (16,6)
12 (0,83) 147 (3,94) 279 (7,48) 380 (10,2) 527 (14,1) 721 (19,3)
30 (2,1) 333 (8,92) 481 (12,9) 698 (18,7) 860 (23)
60 (4,1) 512 (13,7) 783 (21,0) 1341 (35,9) 1418 (38)
150 (10,3) 1217 (32,6) 1597 (42,8) 3581 (96)
4.5 psig
(0,3 bar)
8 (0,55) 93 (2,49) 147 (3,94) 194 (5,2) 310 (8,31) 403 (10,8) 419 (11,2)
12 (0,83) 124 (3,32) 163 (4,37) 248 (6,65) 411 (11) 558 (14,9)
30 (2,1) 233 (6,24) 357 (9,57) 589 (15,8) 643 (17,2)
60 (4,1) 457 (12,2) 628 (16,8) 953 (25,5) 1039 (27,8)
150 (10,3) 953 (25,5) 1271 (34,1) 2798 (75)
4.5 to 7 psig
(0,3 to 0,5 bar)
1B537327052
Black
0.7 psig
(48 mbar)
4.5 psig
(0,3 bar)
9 (0,62) 147 (3,94) 240 (6,43) 333 (8,92) 481 (12,9) 721 (19,3) 767 (20,6)
12 (0,83) 163 (4,37) 310 (8,31) 434 (11,6) 628 (16,8) 891 (23,9)
30 (2,1) 403 (10,8) 667 (17,9) 853 (22,9) 1403 (37,6)
60 (4,1) 667 (17,9) 1178 (31,6) 1589 (42,6) 2100 (56,3)
150 (10,3) 1519 (40,7) 2697 (72,3) 3906 (105)
7 psig(0,5 bar)
9 (0,62) 124 (3,32) 163 (4,37) 209 (5,6) 403 (10,8) 481 (12,9) 512 (13,7)
12 (0,83) 147 (3,94) 240 (6,43) 287 (7,69) 504 (13,5) 667 (17,9)
30 (2,1) 287 (7,69) 543 (14,6) 698 (18,7) 1031 (27,6)
60 (4,1) 620 (16,6) 1000 (26,8) 1333 (35,7) 1899 (50,9)
150 (10,3) 1480 (39,7) 2596 (69,6) 3139 (84,1)
- Blank areas indicate where maximum operating inlet pressure for a given orice is exceeded.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 101/104
Y600A Series Pressure Reducing Regulators
101
AIR P RODUCTS
- continued -
Table 5. Capacities for 1-inch Body
OUTLET PRESSURE
RANGE, CONTROL
SPRING PART NUMBER,
AND COLOR
OFFSET
FROM
SETPOINT
OUTLET
PRESSURE
SETTING
INLET
PRESSURE,
PSIG (bar)
Orice Size, Inches (mm)
Capacities in SCFH (Nm3 /h) of Air
1/8 (3,2) 3/16 (4,8) 1/4 (6,4) 3/8 (9,5) 1/2 (12,7) 9/16 (14,3)
4 to 8-inches w.c.
(10 to 20 mbar)
1B653827052
Red
1-inch w.c.
(2 mbar)
7-inches w.c.
(17 mbar)
1 (0,069) 69.8 (1,87) 171 (4,58) 194 (5,2) 233 (6,24) 318 (8,52) 411 (11)
5 (0,34) 171 (4,58) 333 (8,92) 349 (9,35) 884 (23,7) 1473 (39,5) 1488 (39,9)
8 (0,55) 178 (4,77) 380 (10,2) 411 (11) 1659 (44,5) 1829 (49)
20 (1,4) 403 (10,8) 752 (20,2) 1403 (37,6) 907 (24,3)(1)
35 (2,4) 550 (14,7) 1147 (30,7) 1783 (47,8)(1) 721 (19,3)(1)
75 (5,2) 798 (21,4) 853 (22,9)(1) 1077 (28,9)(1)
150 (10,3) 1302 (34,9)(1) 899 (24,1)(1)
7 to 16-inches w.c.
(17 to 40 mbar)
1B653927022
Olive drab
1-inch w.c.
(2 mbar)
11-inches w.c.
(27 mbar)
1 (0,069) 69.8 (1,87) 124 (3,32) 132 (3,54) 163 (4,37) 178 (4,77) 194 (5,2)
5 (0,34) 124 (3,32) 233 (6,24) 240 (6,43) 403 (10,8) 481 (12,9) 899 (24,1)
8 (0,55) 132 (3,54) 279 (7,48) 333 (8,92) 899 (24,1) 1132 (30,3)
20 (1,4) 271 (7,26) 450 (12,1) 605 (16,2) 1263 (33,8)
35 (2,4) 434 (11,6) 798 (21,4) 2201 (59) 922 (24,7)(1)
75 (5,2) 953 (25,5) 1000 (26,8) 1170 (31,4)(1)
150 (10,3) 1349 (36,2) 961 (25,8)
15-inches w.c.
to 1.2 psig
(37 to 83 mbar)
1B537027052
Yellow
5.5-inches
w.c.
(14 mbar)
15-inches w.c.
(37 mbar)
2 (0,14) 69.8 (1,87) 357 (9,57) 388 (10,4) 853 (22,9) 899 (24,1) 1008 (27)
6 (0,41) 194 (5,2) 581 (15,6) 721 (19,3) 1938 (51,9) 2170 (58,2)
10 (0,69) 264 (7,08) 713 (19,1) 1232 (33) 2519 (67,5)
30 (2,1) 527 (14,1) 1209 (32,4) 2193 (58,8) 4232 (113)
60 (4,1) 899 (24,1) 1976 (53) 3581 (96)
150 (10,3) 1992 (53,4) 2147 (57,5)
1.2 psig
(83 mbar)
2 (0,14) 69.8 (1,87) 310 (8,31) 357 (9,57) 636 (17) 651 (17,4) 698 (18,7)
6 (0,41) 194 (5,2) 488 (13,1) 543 (14,6) 1201 (32,2) 1248 (33,4)
10 (0,69) 248 (6,65) 667 (17,9) 791 (21,2) 1798 (48,2)
30 (2,1) 519 (13,9) 1194 (32) 1976 (53) 3402 (91,2)
60 (4,1) 884 (23,7) 1976 (53) 3247 (87)
150 (10,3) 1992 (53,4) 2403 (64,4)
1. Indicates capacity limited due to boost.
- Blank areas indicate where maximum operating inlet pressure for a given orice is exceeded.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 102/104
Y600A Series Pressure Reducing Regulators
102
AIR P RODUCTS
Table 5. Capacities for 1-inch Body (continued)
OUTLET PRESSURE
RANGE, CONTROL
SPRING PART NUMBER,
AND COLOR
OFFSET
FROM
SETPOINT
OUTLET
PRESSURE
SETTING
INLET
PRESSURE,
PSIG (bar)
Orice Size, Inches (mm)
Capacities in SCFH (Nm3 /h) of Air
1/8 (3,2) 3/16 (4,8) 1/4 (6,4) 3/8 (9,5) 1/2 (12,7) 9/16 (14,3)
1.2 to 2.5 psig
(83 to 172 mbar)
1B537127022
Light green
0.2 psig
(14 mbar)
1.2 psig
(83 mbar)
2 (0,14) 93 (2,49) 163 (4,37) 178 (4,77) 279 (7,48) 481 (12,9) 512 (13,7)
6 (0,41) 140 (3,75) 264 (7,08) 349 (9,35) 581 (15,6) 682 (18,3) 837 (22,4)
10 (0,69) 147 (3,94) 434 (11,6) 504 (13,5) 891 (23,9) 1356 (36,3)
30 (2,1) 488 (13,1) 953 (25,5) 1240 (33,2) 1480 (39,7)
60 (4,1) 783 (21) 1899 (50,9) 2790 (74,8) 1876 (50,3)
150 (10,3) 1891 (50,7) 2697 (72,3) 2999 (80,4)
2.5 psig
(172 mbar)
6 (0,41) 109 (2,92) 202 (5,41) 209 (5,6) 388 (10,4) 519 (13,9) 527 (14,1)
10 (0,69) 140 (3,75) 349 (9,35) 380 (10,2) 550 (14,7) 667 (17,9)
30 (2,1) 442 (11,8) 558 (15) 798 (21,4) 1271 (34,1)
60 (4,1) 659 (17,7) 1418 (38) 1953 (52,3) 2426 (65)
150 (10,3) 1697 (45,5) 2596 (69,6) 2697 (72,3)
0.3 psig
(21 mbar)
2.5 psig
(172 mbar)
4 (0,28) 109 (2,92) 140 (3,75) 147 (3,94) 318 (8,52) 333 (8,92) 372 (9,97)
8 (0,55) 140 (3,75) 248 (6,65) 279 (7,48) 550 (14,7) 574 (15,4) 698 (18,7)
12 (0,83) 147 (3,94) 310 (8,31) 380 (10,2) 721 (19,3) 744 (19,9)
30 (2,1) 333 (8,92) 481 (12,9) 698 (18,7) 1418 (38)
60 (4,1) 512 (13,7) 1248 (33,4) 1349 (36,2) 2302 (61,7)
150 (10,3) 1558 (41,8) 3170 (85) 5162 (138)
4.5 psig
(0,3 bar)
8 (0,55) 93 (2,49) 147 (3,94) 194 (5,2) 380 (10,2) 403 (10,8) 419 (11,2)
12 (0,83) 124 (3,32) 163 (4,37) 248 (6,65) 473 (12,7) 659 (17,7)
30 (2,1) 302 (8,09) 403 (10,8) 589 (15,8) 1054 (28,2)
60 (4,1) 488 (13,1) 651 (17,4) 953 (25,5) 2000 (53,6)
150 (10,3) 1077 (28,9) 2232 (59,8) 3867 (104)
4.5 to 7 psig
(0,3 to 0,5 bar)
1B537327052
Black
0.7 psig
(0,5 bar)
4.5 psig
(0,3 bar)
9 (0,62) 163 (4,37) 240 (6,43) 333 (8,92) 597 (16) 752 (20,2) 814 (21,8)
12 (0,83) 178 (4,77) 310 (8,31) 434 (11,6) 783 (21) 1000 (26,8)
30 (2,1) 403 (10,8) 667 (17,9) 853 (22,9) 1612 (43,2)
60 (4,1) 682 (18,3) 1178 (31,6) 1589 (42,6) 2829 (75,8)
150 (10,3) 1597 (42,8) 2720 (72,9) 4650 (125)
7 psig
(0,5 bar)
9 (0,62) 124 (3,32) 163 (4,37) 209 (5,6) 457 (12,2) 481 (12,9) 512 (13,7)
12 (0,83) 163 (4,37) 240 (6,43) 287 (7,69) 597 (16) 690 (18,5)
30 (2,1) 287 (7,69) 543 (14,6) 689 (18,5) 1279 (34,3)
60 (4,1) 620 (16,6) 1000 (26,8) 1333 (35,7) 2139 (57,3)
150 (10,3) 1558 (41,8) 2627 (70,4) 3209 (86)
- Blank areas indicate where maximum operating inlet pressure for a given orice is exceeded.
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 103/104
Y600A Series Pressure Reducing Regulators
103
AIR P RODUCTS
Table 6. Dimensions and Shipping Weight
BODY SIZE,
INCHES
DIMENSIONS, INCHES (mm)APPROXIMATE SHIPPING WEIGHT,
POUNDS (kg)AD
(Diameter)E F G
3/4 and 1 4 (102) 8.38 (213) 6.25 (159) 10.69 (272) 1.00 (25) 13 (5,9)
Figure 4. Y600A Series Dimensions
1/4-INCH NPT VENTCONNECTION WITH
REMOVABLE VENT
1/2-INCH NPT CONTROLLINE CONNECTION ON
TYPE Y600AM
INCHES
(mm)
5.56
(141)
A/2
A
D
F
E
G
B2604
8/11/2019 Air Plant and Instruments.pdf
http://slidepdf.com/reader/full/air-plant-and-instrumentspdf 104/104
Y600A Series Pressure Reducing Regulators
AIR P RODUCTS
Specication Worksheet
Application:
Specic Use
Li Si
Ordering Guide
Type (Select One)
Y600A (internal pressure registration)***
Y600AM (external pressure registration)**
Y600AR (internal relief/internal pressure registration)**
Body Size (Select One)
3/4-inch***
1-inch***
Orifice Size (Select One) 1/8-inch (3,2 mm)***
3/16-inch (4,8 mm)***
1/4-inch (6,4 mm)***
3/8-inch (9,5 mm)***
1/2-inch (12,7 mm)***
9/16-inch (14,3 mm)***
Outlet Pressure Ranges (Select One)
4 to 8-inches w.c. (10 to 20 mbar)***
7 to 16-inches w.c. (17 to 40 mbar)***
15-inches w.c. to 1.2 psig (37 to 83 mbar)***
1.2 to 2.5 psig (83 to 172 mbar)***
2.5 to 4.5 psig (172 mbar to 0,3 bar)***
4.5 to 7 psig (0,3 to 0,5 bar)***