AIR FILTERATION USING HEPA FILTERS
-
Upload
tiaiosycollege -
Category
Engineering
-
view
175 -
download
3
Transcript of AIR FILTERATION USING HEPA FILTERS
By: Shaikh Maaz Zubair Sayyed Mohammad Faiz
IMPROVING AIR QUALITY OF SICK
BUILDING USING HEPA FILTER
MHSSCOE
According to WHO delhi is one of the most polluted cities in the world, with people on risk of respiratory disease.
Often the air quality inside a building is worse than the air quality outside
Harmful compounds can be found in carpets, building materials, paints and furniture – especially when they are new
Air pollution can cause serious health problems, especially for people who are very young, very old, or who have heart or lung problems.
Sick-Building Syndrome Sick-building syndrome is a set of
symptoms, such as headache, fatigue, eye irritation, and dizziness, that may affect workers in modern, airtight office buildings.
Sick-building syndrome is believed to be caused by indoor air pollutants.
Sick-building syndrome is most common in hot places where buildings are tightly sealed to keep out the heat.
What is a HEPA FILTER?HEPA is an acronym for “High Efficiency
Particulate Air”This type of air filter can remove at least 99.97%
of dust, pollen, mold, bacteria and any airborne particles with a size of 0.3 micrometres (μm)
• Human Hair: 50 150 microns • Household dust and lint: 0.01 100 micron• Pollen: 10 110 microns • Mold: 1 50 microns • Pet dander: 0.1 10 microns • Tobacco Smoke: 0.01 1 micron • Viruses and Bacteria: 0.001 10 microns
Construction:HEPA filter is constructed of borosilicate
microfibres in the form of pleated sheetSheet is pleated to increase the overall
filtration surface area.The pleats are separated by serrated
aluminum baffles or stitched fabric ribbons, which direct airflow through the filter
This combination of pleated sheets and baffles acts as filtration medium.
HEPA FILTER
Filtration mechanisms: 1. Inertial Impaction :
larger particles are filtered due to the impaction
mechanism. Larger particles have higher mass and are harder to
turn than smaller particles due to inertia. Because of this inertial effect, the particles continue to travel in a somewhat straight line even though the airstream is turning to move past the fiber.
Once the particle comes in contact with the fiber, it becomes attached and is “filtered” from the airstream
Filtration mechanisms:2. Diffusion:
it is the most difficult air filtration mechanism to imagine or explain.
Very small particles come in contact with fibers due to diffusive effects.
The particles collide with air molecules and are “pushed around.” This effect is called Brownian motion. Because of Brownian motion, small particles don’t precisely follow the airstream, but instead “vibrate” or move erratically.
Filtration mechanisms: 3.Interception :
In order to be intercepted, a particle must come within a distance from a fiber of one radius of itself. Thus, the particle makes contact with the fiber and becomes attached.
The interception mechanism can be contrasted with the impaction mechanism in that a particle which is intercepted is smaller and its inertia is not strong enough to cause the particle to continue in a straight line.
Overall Design
There’s also the powerful combination of an activated carbon pre-filter. That’s double the precaution and filtration. Nothing gets through, dust, gases, or smells. Activated carbon filters or anti bacterial filters are rarely used alone to clean the air, but as a helper they work wonders!
Function of Pre-filtersHaving pre-filters inbuilt into purifiers is a
hefty advantage over cleaners that don’t. This is the first step in the filtration process where the pre-filters job is to capture large particles the main filter usually can’t, or particles that get stuck to it.
It prevents debris getting into the main filter, and this is why pre-filters come in handy as an additional strength in filter technology.
Anti Bacterial Filters Anti bcterial filter are special in a few ways.
similar kind is activated carbon filter.Activated carbon is also called activated
charcoal which goes through a process with oxygen to open up the pores between atoms.
The main function of activated charcoal is to adsorb the odors or colored substances from liquids or gases.
PROPOSAL FOR PROJECT (B)
The model consist of a powerful fan placed in a timber or
plastic frame and installing pre-filter, HEPA filter and carbon filter in front of the fan the edges of the unit will be tape with duct tape to ensure that air will properly flow through the filters and the fan.
Proposed Design.
Testing of the model will be done on respiratory dust sampler machine in the environment lab of the college.
The output of HEPA filter can be connected on the outside plate of sampler along with the filter paper to test out the concentration of particulate matter removed by HEPA filter in the room.
The output of HEPA filter can be connected on the outside plate of sampler along with the filter paper to test out the concentration of particulate matter removed by HEPA filter in the room.
A typical dust sampler at
environment lab of MHSSCOE
Thank
you…!