Air Cooling System.pdf 1
-
Upload
enviro-tech-industrial-products -
Category
Documents
-
view
218 -
download
0
Transcript of Air Cooling System.pdf 1
-
7/31/2019 Air Cooling System.pdf 1
1/8
Air Cooling System
We are involved in offering a wide range of Air Cooling System, which includes Air
Washer, Air handing Unit,Fresh Air Unit and Cellulose Paper Pad / Cooling PadsPVCFills, FAN COIL UNITDuctable Unit. These are commonly used for dissipating heat, whichworks with an increased flow of air over its surface. These are available in variouscustomized finishes as per the clients need.
1. Air Washer
Central Air- Cooling is the ideal alternative in places likes bungalows, restaurants, offices etc.where
large area, separate rooms or cabins & different floors are involved.
The conventional air washer, comprising distribution louvers, sprays header piping & eliminator,
occupies large space, involves on site fabrication GI/RCC, expert consultancy & supervision & huge
cost. Due to these inherent problems in conventional Air Washers, Central Air Cooling was not
installed in Bungalows, Restaurants & Offices.
ENVIRO TECH Air Washer has now overcome all these problems. It is the latest & most advanced
factory assembled unit, having 3000 CFM to 25000CFM capacity : suitable for floor area 600 sq. ft. to
4000 sq.ft. And above.
2. AHU Unit
-
7/31/2019 Air Cooling System.pdf 1
2/8
Enviro Tech manufacturing of single & double skin air handling unit and ceiling suspended units of
higher capacity 800 cfm to 60000 cfm-v-beltt drive & direct drive static presure 10 mm to 300 mm w.
G. Depends on the application and requirement.
Technical Specifications.
we are manufacturing air handling unit & ceiling suspended units in single & double skin configurations
casing the standard aluminum hollow profile, panel thick 25mm insulation p. U. F outer color coated
sheet. Inner gi plain sheet, blower centrifugal type forward curved, wet and dry sections, cooling coil
filter section easly slided for 50 mm thick pre air filter box type washable type & canvas.
APPLICATION.
Air conditioning, showroom, shopping mall, restaurant & bar, hotels, office, call centre, building,
schools, studio, institute, hospital, Pharma Company, clean room, etc.
3. Fresh Air Unit / Dust Free Unit
Unit Capacity
From 2000 cfm to 50000 cfm or above
Casing
In Double skin construction the structure is made of hollow aluminum profile with nylon corners andpanels are made of 0.6 mm thickness pre - coated outer sheet and GI inner sheet. The panels areinsulated with injected PUF (38kg / cubic m.) / EPS slabs / Kini Foam. In Single skin construction thestructure is modular type, made of GI hollow profile and is mechanically bolted with Top and BottomTray. Panels are made of 18g. Or 16g. (Thickness varies according to the size of unit).
Blower
The Blowers used in Unit are imported or indigenous and is centrifugal type Forward Curved fornormal static pressure, Mounted on Rubber Isolators for smooth and quite operation. Sant makeBlowers are dynamically and statically balanced on FIE make computerized Balancing machine.
Motor
The motor used is Drip proof mounted on specially designed adjustable motor base. Electrical supplynormally is 3 ph / + / -415 volts.
Flat Filter Section
Filter section channels are designed for 50 mm thick Expanded Aluminum Mesh washable Pre Filterswith easily removable facility.
-
7/31/2019 Air Cooling System.pdf 1
3/8
4. Cellulose Paper Pad
Apart from manufacturing the fans for various applications. Enviro tech markets the cell deck cooling
pad, made by various companies in India and abroad and is well established withrespect to poultry,
horticulture (greenhouse) andindustrial applications.
the evaporative cooling pad (ecp) made of cell deck cooling pad paper is engineered from cross-
sectional, specially treated flute media capable of absorbing and retaining water to provide the
maximum cooling efficiencies. The cell deck cooling pad media is treated with stiffening and wetting
agents to provide the cooling, without any water carryover.
The pads are designed for tropical and subtropical countries, ensures greater performance during
summer seasons. The pad media is treated with anti-rot and rigidifying resins. The media is cross-
corrugated to maximize the mixing of air and wather. Saturation effectiveness ranging from 50 to
98% can be achieved depending upon air velocity and depth of the cooling pad.
Air flows horizontally, while the re-circulating water flows vertically, through the pad. The water is
collected at bottom of the pad and is re-circulated again by a pump through the unique gutter system
made of g. I. Sheet.
Cellulose paper pad Applications:
* Livestocks.
* Greenhouses.
* Gas Turbine.
* Pre Cooler For Air Cooled Condenser.
* Spray Painting Booth.* Industrial Applications.
* Commercilal Applications.
* Humidification.
-
7/31/2019 Air Cooling System.pdf 1
4/8
5. FAN COIL UNIT.
Fan coil units are available in two configurations: Horizontal type suitable for ceiling suspension and
Vertical type suitabia for floor mounting:
Technical Specifications:
Casing: Galvanised sheets of heavy gauge steel with suitable drain tray to avoid sweating. TheFan Coil Unit are (double skin) Powder coating.
Blowers: The multiblade forward curved centrifugal type aluminium fan wheels statically and
dynamically Balanced are driven by extended shaft motor.
Fan Motor: 3 speed, permanent split capacitor type motor with extended manual speed
selection.
Drain Fan: Heavy gauge. Double skin Insulated drain pan extend full width of coil collect
condensate from Chilled water coils, valve and fitting with provision of drain nipple to avoidoverflow.
Cooling Coil: 3 row deep, 3/8 O.D. copper tubing, Aluminum fin constuctioin providemaximum. Heat transfer. The water inlet and outlet are provided with flare nut for connections to
control valves.
Air Filter: Filter are made of expanded aluminum mesh/ HDPE media/synthetic non-w oven
media and Are permanent cleanable type filter the air to a maximum deg
-
7/31/2019 Air Cooling System.pdf 1
5/8
6. Ductable Unit.
Ceiling suspended ductable units [capacity 1000 cfm-10000 cfm]
Direct drive ceiling suspended ductable units [capacity 1000 cfm-5000 cfm.
7. Axial Flow Fan.
Enviro Tech Axial Flow Fans have MS Casing / Bracket with cast aluminium alloy impeller with
aerofoil section blades suitable for various mountings.
Enviro Tech Axial Flow Fans are used in industry for providing general ventilation, fume exhaust and removal of hot
spots and as roof extractor.
Enviro Tech offers a most economical and efficient installation for the industry such as Thermal Power stations,
fertilizers, heavy engineering, chemical, textiles, food, general, paper and sugar pharmaceuticals ets.
-
7/31/2019 Air Cooling System.pdf 1
6/8
8. Air Curtain.
An Air Curtain is a modern device which when installed on a door forms an invisible curtain of continuous air which
restrict the escape of conditioned air and also prevent entry of outside hot, humid, dirty and unwanted polluted air.
Enviro Tech Air Curtains areavailable in two configuration (both vertical and horizontal) and 4 different velocities.
They are suited for door opening ranging from 2. 5 ft. (0mm) wide to 8 ft. (2. 44 mtrs) wide and invelocities ranging
from 7 m/sec. Or above as per customer requirements. These velocities are divided in 4 different groups for the
convenience of our customers which are as below :
Normal Velocity : (7 to 9 m/sec. ) air curtain of this range generally used for internal doors, windows and such
spaces where the outside wind velocity is not very high.
High Velocity : (10 to 12 m/sec. ) this is the most popular range of velocity for the air curtains required by the
customers. This is used for internal as well as external doors.
Extra Velocity : (13 to 15 m/sec. ) air curtains in this velocity range are used for external door where outside wind
velocity is very high or where it is very important that no dust insects or flies should enter.
Special Purpose : ( 13 m/sec or above). these air curtains are special purpose type and are made according to
specific requirements of valued customers. These are ideally suited for dairies, food processing units or other
application where it is extremely important that no outside air should enter the premise.
Technical Specifications
Cabinets Material Used :
(a) Cold Rolled Mild Steel : 16 swg for base plate.
18 swg for body
20 swg for grilies
(b) Galvanised Iron Sheet: 20 swg for blower housing.
Interior Finish: anti rust treatment primer paint.
Exterior Finish: power coating
Fan & Motors: the multiblade forward curved centrifugal type al. Fan dynamically balanced are driven by extended
motor shaft.
APPLICATION : air curain have numerous uses right from cutting down the elericity bills to prevention of entry of
unwanted insects,files,hot,humid air etc, & popularly used by offices departmental stores,garment manufactures,cold
storage,hotel,rrestaurants,kitchens,bakeries,dairiesa
pharmaceutical plants, taxtile mills,cement plants; and all those industries where surrounding air contains high dust
concentrations such as coal andlight mines, steel plants, foundries cement plant and other similar industries.
How To Order: while sending your requirements or for enabling us to suggest suitable air curtains,
please send us the following information:
1. Size of door.
2. Clear space available above and sides of door opening.
3. Frequency of door.
4. Purpose for which your place is being used.
5. Position of door and appropriate wind velocity.
-
7/31/2019 Air Cooling System.pdf 1
7/8
9. Impellers
We facilitate our clients with Impellers that help fans/blowers to exhaust and supply air, gas, fume and dust in various
industry processes. Manufactured using high grade raw material, our range is known for steady construction and
durability. Our aerodynamically balanced range is high in efficiency and can be availed at industry leading price.
Our range includes:
Backward curved bladed Impeller
Forward carved bladed Impeller
Straight radial bladed Impeller
Backward inclined Aerofoil blades Impeller
Impellers of Limit Load Fan (LL Fan)
Single Inlet type dia 2800 mm impeller
-
7/31/2019 Air Cooling System.pdf 1
8/8
TERMS & CONDITIONS:
1. Prices are EX WORKS Delhi Forwarding, Transport, & special packing Charges extra2. Sales tax and other duties are extra.3. Prices are subject to change without notice.
4. Payments 30% Advance and Balance against delivery at works.5. Our risk & responsibility ceases on delivery of the goods to the carriers.
Thanking you, and looking for an early feedback.
Yours faithfully,
For Enviro Tech Industrial Products.
CONTACT DETAILS :
ENVIRO TECH INDUSTRIAL PRODUCTSFactory:-X/858 Chand Mohalla, Gandhi Nager, Delhi-110031.
OFFICE:-A-12,Basement, Pandav Nager Complex, Ganesh Nager, Near
Aggarwal Sweet, Delhi-110092.
Phone : (O) +91-22483365
Phone : (F) +91-22083434
Tel-Fax: (O) +91-22083434
E-mail : [email protected].
Contact PersonMr. R.P.SHARMA.
Mobile: 9871034100.
Mr. D.P.SHARMA.
Mobile: 9871014210, 9868958924.