Ahmed Shibli, United Kingdom Shaikh Asad Ali Dilawary ... · Oct 18, 2019 Page 2 of 29 Syed Abbas...

Oct 18, 2019

of 29

Session 01 (Lecture Room No 1)

Monday, October 21, 2019 Time 11:00-12:40

Chairperson: Lin Liu and T.I. Khan

11:00 19-249 KN Recent Trends in Additive Manufacturing

Waseem Haider, USA 11:40 19-196 KN Recent Development of Materials for the New Generation of

Higher Efficiency Power and Process Plant Ahmed Shibli, United Kingdom

12:20 19-149 Microstructural Evolution upon Laser Surface Melting and Mo Addition on Plasma Transferred Arc Deposited M2 High Speed Steel Hard Facings

Shaikh Asad Ali Dilawary, Pakistan

12:40-14:00 Lunch Break



Chairperson: F. A. Khalid and Waseem Haider

14:00 19-91 KN Fabrication, Characterization, and Optimization of Cold-Crucible Based Rapidly Solidified Ti Powders for Additive Manufacturing

Taek Soo Kim, South Korea

14:40 19-65 KN Phase Study of Heat Treated CoCrFeNiTi0.5 High Entropy Alloy Powder

Bum Sung Kim, Muhammad Aneeq Haq, Noh Su, Eom Nu Si A, South Korea

15:20 19-N6 Enhanced Piezoelectricity in TA45 Modified (K0.5Na0.5)NbO3 Ceramics to Texture Engineering

Ali Hussain, Pakistan

15:40-16:00 Tea Break



Chairperson: Shahid Akhtar and Hadia Noor

14:00 19-56 Effect of Nano-Silica Volume Reinforcement on the Microstructure, Mechanical, Phase Distribution and Electrochemical Behavior of Pre-Alloyed Titanium-Nickel (TiNi) Powder

Oct 18, 2019

of 29

Syed Abbas Raza, Muhammad Imran Khan, Mairaj Ahmad, Asim Iltaf, Danish Tahir, Pakistan

14:20 19-189 Development of Doped Graphene Oxide-Based Electrodes for Super Capacitor

Umar Latif, Mohsin Ali Raza, Zaeem Ur Rehman, Pakistan

14:40 19-48 Manganese Oxide-Based Hybrid Electrodes for Supercapacitor Applications

Zaeem Ur Rehman, Mohsin Ali Raza, Uzair Naveed, Aoun Hussnain, Farasat Ali, Pakistan

15:00 19-136 Graphene Based Nanocomposites for Photocatalysis and Biomedical Applications

Aqsa Arshad, Aqsa Arshad, Pakistan

15:20 19-85 Synthesis of Silver Impregnated Graphene Oxide and Reduced Graphene Oxide by Re-Modified Hummers Method & its Application for Water Treatment

Shahid Bhutto, Muhammad Yasir Khan, Nusrat Jalbani, Shehzad Khan Pakistan

15:40-16:00 Tea Break



Chairperson: Ahmed Shibli and Sara Qaiser

14:00 19-78 Effect of Rare Earth Elements on Structural, Dielectric, Electrical Polarization and Microwave Absorption Properties of R-Type Hexaferrites

Imran Sadiq, Pakistan

14:20 19-132 Failure Analysis of an Aerospace Grade GFRP Composite Shell Muhammad Haroon Qaiser, Imran Nazir, Amjad Ali, Hamid Zaigham,

Pakistan 14:40 19-115 Strip Size Optimization for Spiral Type Actuator Coil Used in

Electromagnetic Flat Sheet Forming Experiment Shakeel Akbar, F. Pirndad, M. A. Aleem, Pakistan

15:00 19-7 Effect of Precursor Graphite on the Thermal Contact Resistance of Thermally Reduced Graphene Oxide/Silicone Composites Developed for Thermal Interface Applications

Mohsin Ali Raza, Paksiatn

15:20 19-246 Eu Doped Alumina for Simultaneous PL Imaging and Drug Delivery

Numrah Sultan, Syed Mujtaba ul Hassan, Pakistan

Oct 18, 2019

of 29

15:40-16:00 Tea Break

Session 05 Monday, October 21, 2019 Time 16:00-17:15

Exhibition (Open for All Participants during 21-25 October 2019)

17:15-17:25 Ice Cream


Tuesday, October 22, 2019 Time 09:00-10:40

Chairperson: Zulfiqar Ahmed and Hamid Zaigham

09:00 19-53 KN Surface and Structural Characterization of High Voltage Overhead Electrical Conductors: Ageing and Environmental Effects

Amir Azam Khan, Lim Soh Fong, David Bong Boon Liang, Andrew Ragai Henry Rigit, Malaysia

09:40 19-125 KN A Unified Multiscale Elevated Temperature Damage and Crack Growth Prediction of Advanced Alloys

Kamran Nikbin, United Kingdom 10:20 19-58 Temperature Dependent Thermal and Impedance Response of

NiO/Fe2O3 Composite and Compound Nanoparticles Omer Farooq, M. Anis-ur-Rehman, Anwar ul Haq, Pakistan

10:40-11:00 Tea Break

Session 07 (Lecture Room No 1) Tuesday, October 22, 2019 Time 11:00-12:40

Chairperson: Taek Soo Kim and Javed Ahmad

11:00 19-47 KN Nanomaterial Enhanced Low Carbon Technology Solutions for Energy Capture, Generation and Storage

Zulfiqar A Khan, United Kingdom

11:40 19-31 KN Nanoparticle Enhanced Diffusion Bonding Process Tahir I. Khan, United Kingdom

12:20 19-288 3D Woven Composite Materials for Ballistic Applications Yasir Nawab, Pakistan


Oct 18, 2019

of 29



Chairperson: Amir Azan Khan and Kim Bum Sung

14:00 19-VL1 Video Lec.

Processing of Titanium Alloys

Bradly P Wynne, United Kingdom

14:40 19-37 KN Modified ZnO Nanoparticles Thin Films as Visible Light Photocatalysts for Wastewater Treatment

Mohamed Abou El-Fetouh Barakat, Jamshaid Rashaid, Saudi Arabia

15:20 19-287 In-Vitro Study of Commercially Pure Titanium After Ultrasonic Surface Mechanical Attrition Treatment (SMAT)

Kamran Yaseen, Pakistan

15:40-16:00 Tea Break



Chairperson: Ahmed Shibli and Anjum Tauqir

11:00 19-45 La0.7Sr0.3Mn1-XBxO3 (B=Mo, Ti) Nanoparticles for Self- Controlled Hyperthermia

Jihed Makni, Kalthoum Riahi, Firas Ayadi, Virginie Nachbaur, Wissem Cheikhrouhou-Koubaa, Muhammad Asif Hamayun, Mohamed Koubaa, Sadia Manzoor, El-Kbir Hlil, Abdelwaheb Cheikhrouhou, Tunisia

11:20 19-264 Biocompatibility and Toxicity of Gold Nanoparticles Biosynthesized using Monotheca Buxifolia Leaf Extract

Asma Shah, Ghosia Lutfullah, Kafeel Ahmad, Ali Talha Khalil, Khalid Khan, Ghazala Shah, Aftab Ahmad, Pakistan

11:40 19-245 Preparation of Al2O3 Whiskers from AACH Using Hydrothermal Method and Its Use for the Removal of Lead Ions by Adsorption

Asma Ameer, Syed Mujtaba-Ul-Hassan, Syed Muhammad Husnain, Mirza Jamil Ahmad, Fahad Ali, Pakistan

12:00 19-127 Synthesis and Characterization of Rare Earth Substituted M -Type (Sr-Ba) Hexaferrites

Hasan Mehmood, Hasan, Pakistan

12:20 19-110 Novel Yet Simple Nano-Fluid Treatment of Transformer Oil to Improve Dielectric Breakdown Strength

Saim Saher, Affaq Qamar, Kamran Alam, Pakistan

Oct 18, 2019

of 29




Chairperson: A. Cheikhrouhou and Ali Dad Chandio

14:00 19-236 Influence of Zinc Oxide Nanoparticales on Mechanical and Dielectric Properties of Nanocomposities

Hadia Noor, Safir Ullah Khan, Atia Zafar, Saira Riaz, Shahzad Naseem, Pakistan

14:20 19-96 Surface Modification of AZ31B Magnesium Alloy by Microarc Oxidation Method

Ahsan Saleem, Ameeq Farooq, Kaab Bin Tayyab, Abdus Salam, Pakistan

14:40 19-244 Magnetic, Magnetothermal and Magnetocaloric Effect of Ni100-XGex and Ni0.9Cu0.1-XGex Thermoseeds for Self-Controlled Hyperthermia

M Hisham Alnasir, Pakistan

15:00 19-168 Hydrothermal Synthesis of Metal Sulfides via Single Source Precursors for Supercapacitors

Sadia Khalid, Pakistan

15:20 19-204 Crack Repairing of Aluminum Alloy 6061 by Reinforcement of Al2O3 and B4C Particles Using Friction Stir Processing

Zunair Masroor, Ahsan Abdul Rauf, Faisal Mustafa, Syed Wilayat Husain, Pakistan

15:40-16:00 Tea Break



Chairperson: Waseem Haider and Muhammad Yasir Khan

11:00 19-289 Nanoparticle Enhanced Transient Liquid Phase Bonding Process Tahir I. Khan, M. A. Baloch Shar, K. O. Cooke, M. H. Khan, A. AlHazaa,

United Kingdom

11:20 19-105 Development of an Indigenous Hail Testing Machine to Analyze the Reliability of Photovoltaic Modules

Hafiz Basit Ali, Rizwan Mahmood Gul, Muhammad Ali Kamran, Syed Nouman Ali Shah, Pakistan

11:40 19-221 Improving the Corrosion Resistance of API X56 and API X70 Pipeline Steels by Hot Dip Aluminization

Oct 18, 2019

of 29

Muhammad Ramzan Abdul Karim, Akhlaq Ahmad, Ehsan Ul Haq, Sanam Daniel, Khurram Imran Khan, Pakistan

12:00 19-25 Electrophoretic Deposition of Chitosan/Gelatin/Silver – Strontium Doped Mesoporous Bioactive Glass Nanoparticles on PEEK/Bioactive Glass Layers for Orthopedic Implants

Shaher Bano Zaidi, Abdul wadood1, Qaiser Nawaz, Aneeqa Nawaz, M. Atiq Ur Rehman, Aldo R.Boccaccini, Pakistan

12:20 19-69 Modified Zinc Oxide Nanoparticles for Corrosion Resistance Applications

Ali Dad Chandio, Muhammad Hamza Saleem, Iqra Naeem Hyder, Hasan Raza Khan, Maryam Ali, Pakistan




Chairperson: Kamran Nikbin and M Ramzan A Karim

14:00 19-198 Development of Drones and Robots for Industrial Plant Inspection

Ahmed Shibli, United Kingdom

14:20 19-291 Multifunctional Organic-Inorganic Hybrid Thin Films Naureen Akhtar, Norway

14:40 19-27 Fabrication of Nanophotonic Structures as Broadband Super Absorbers

Abdul Ghafar Wattoo, Tauseef Shahid, Pakistan

15:00 19-81 Effect of Polymer Matrix in Polymer/TrGO Nano-Composite for EMI Shielding Application in Microwave and Infrared Region

Hafiz M Fayzan Shakir, Khadija Zubair, Pakistan

15:20 19-9 Thermal Characterization of Various Reduced Derived Fuel Materials for Energy Applications

Tayyab Qureshi, Muhammad Asif Hussain, Tanveer Iqbal, Ehsan Ul Haq, Asif Nadeem Tabish, Muhammad Hamid Siddiqi, Pakistan

15:40-16:00 Tea Break

Session 13 Tuesday, October 22, 2019 Time 16:00-17:15

Poster Session-I Chairperson: Poster Judges

19-1 Fabrication of Selective Calorimetric Sensor for Hg²+ Using

Oct 18, 2019

of 29

Green Synthesized Silver Nanoparticles Shabana Bhagat, Sirajuddin, Huma Ishaque, Pakistan

19-7 Effect of Precursor Graphite on the Thermal Contact Resistance of Thermally Reduced Graphene Oxide/Silicone Composites Developed for Thermal Interface Applications

Muhammad Awais Ali Zubair, Mohsin Ali Raza, Abdur Rehman Shahid, Talha Abid, Pakistan

19-8 Effect of Silica Reinforcement on Properties of Bentonite Based Geoplymers for Construction Applications

Ehsan Ul Haq, Muhammad Nadeem, Furqan Ahmed, Muhammad usama Majeed, Gul Hameed Awan, Muhammad Ramzan Abdul Kareem, Muhammad Asif Hussain, Pakistan

19-12 Effect of Particles Size Variation on the Microstructure, Mechanical and Corrosion Properties of TiNi- Nano Silica Reinforced Composites

Syed Abbas Raza, Muhammad Imran Khan, Mairaj Ahmad, Rashid Ali Sindhu, Danish Tahir, Pakistan

19-14 Effect of Fiber Dimensional Attributes on Mechanical Properties of Natural Fiber Reinforced Composites (NFRC) using FEA

Muhammad Sohail Malik, Shoaib Ijaz, Ramzan Abdul Karim, Pakistan

19-15 Effect of PH and Chloride Concentration on the Corrosion and Pitting Behavior of Al-7075 T6 Tempered Alloy in Sodium Chloride (NaCl) Solution

Syed Abbas Raza, Muhammad Ramzan Abdul Karim, Rashid Ali Sindhu, Pakistan

19-16 Modeling of Reactive Melt Infiltration Used in the Fabrication of Ni-Si/C Composites

Khurram Iqbal, Pakistan

19-18 A Simplistic Approach to Develop CuS/PbS Nanocomposite for Electrocatalytic and Photocatalytic Applications

Mohsin Muhyuddin, Talha Farooq Khan, M. Abdul Basit, Pakistan

19-19 Design Optimization of Leaf Springs Made up of Laminated Composites in Comparison with Steel

Muhammad Sohail Malik, Rohan Ul Haq, Pakistan

19-22 Producing Fe-Based Bulk Metallic Glass Through Powder Metallurgy Route

Syed Zameer Abbas, Ashraf Ali, Fareed Arshad Nazeer, Imad ud Din, Muaz Chaudhry, Pakistan

19-24 Effect of Temperature on Magnetic Properties of NdFeB and SmCo Magnets

Nouman Bashir, Ali Haider, Kaleem Akram, Saleem Akhtar, Pakistan

Oct 18, 2019

of 29

19-26 Physical and Mechanical Properties of Graphene Nanoplatelets Reinforced Al6061-T6 Composites Processed by Spark Plasma Sintering

Mahmood Khan, Anwar ul Hassan, Rafi Ud Din, Abdul Wadood, Syed Wilayat Husain, Shahid Akhtar, Ragnhild Elizabeth Aune, Pakistan

19-28 Development and Characterization of Manganese Bismuth Magnetic Alloy

Hifsa Mazhar, Syed Wilayat Husain, Pakistan

19-29 Sliding Wear Behavior of Tribaloy T-400 Sprayed Coatings by High Velocity Oxy-Fuel (HVOF) Process.

Irum Kulsoom, Pakistan

19-30 Synthesis of All Inorganic Stable Pervoskite Material for Solar Cell Application

Saqib, Muhammad Adnan, Sofia Javed, Aftab Akram, Muhammad Usman, Pakistan

19-32 Plant Extract Based Synthesis of Gold Nanoparticles and their Application in Sensor

Pirah Siyal, SirajUddin, Pakistan

19-35 Enhanced Properties of HSLA Steels by Electroless Ni-P-Al2O3 Nanocomposite Coatings

K. Shahzad, Malik Adee Umer, R.A. Shakoor, F. Rathore, A.Raza, Shoaib Butt, Pakistan

19-38 Corrosion Study of Epoxy Ester-Based Zinc Rich Paints for Cold Galvanizing of Mild Steel

Muhammad Faheem Maqsood, Mohsin Ali Raza, Zaeem Ur Rehman, Muhammad Abid, Muhammad Usman Bhatti, Muhammad Awais Ali Zubair, Pakistan

19-50 Magnetization of SmCo Permanent Magnet at Elevated Temperature

Kaleem Akram, Nouman Bashir, Ali Haider, Saleem Akhtar, Pakistan

19-52 Indigenous Development and Testing of Spin Coating Device for Professional Use

Afnan Haider Khan, Muhammad Naveed, Amir Mahmood, M. Kamran Ashraf, M. Younas, Pakistan

19-57 Effect of PVA Treatment of Bamboo Fibres on Mechanical Properties of Bamboo/Epoxy Composites

Danish Tahir, Muhammad Ramzan Abdul Karim, Azhar Hussain, Ehsan Ul Haq, Sohail Malik, Syed Abbas Raza, Mairaj Ahmad, Pakistan

19-59 Electron Beam Welding of Ti-6Al-4V and Weldment Characterization

Muhammad Omer Farooq, Massab Junaid, Fahd Nawaz Khan, Pakistan

Oct 18, 2019

of 29

19-61 Personalized Cooling System Using Phase Change Material Kashif Ali, Rizwan Mahmood Gul, Muhammad Ali Kamran,

Salman Noshear Arsahd, Pakistan 19-62 Effect of Ni3Al Coating on Vibration Suppresion of Beams of

Different Thicknesses Shoaib Nadeem, Imran Aziz, Hasan Aftab Saeed, Khalid Mehmood, Pakistan

19-63 Development and Characterization of One-Dimensional TiO2 Nanostructure for Dye Sensitized Solar Cells

Muhammad Omer Farooq, Faheem Iqbal, Pakistan

19-64 Structural, Electrical and Spectroscopic Properties of Yb+3 Substituted β-Ferrites KFe11-XYbxO17

Imran Sadiq, Sajjad Hussain, Pakistan

19-66 Yttrium Doping in Bismuth Vanadate Nanoparticles to Enhance Hydrogen Production by Water Splitting in Photoelectrochemical Cell

Muhammad Imran Rameel, Muhammad Hassan, Pakistan

19-67 Failure/Root Cause Analysis of Boiler Super Heater Tubes Jehanzaib Anwar, Haris ikram, Abdul Qadeer, Hamza Butt, Muhammad Irfan, Pakistan

19-68 Failure Analysis of Agricultural Diesel Engine Crankshafts Hamza Butt, Abdul Qadeer, Haris Ikram, Jehanzaib Anwar,

Muhammad Irfan, Pakistan 19-70 Influence of Annealing Temperature on Mechanical and

Corrosion Behavior of 5083 Al Alloy Qanita Tayyaba, Adnan Qayyum Butt, Hassan Waqas, Muhammad Shahzad,

Ammad H. Qureshi, Pakistan 19-73 Fabrication of Graphene Oxide Assisted Polyamide

Nanocomposite Membranes for Water Disinfection: Probing the Effect of Silane Coupling Agent

Hira Kausar, Altaf Hussain, Saima Shabbir, Pakistan

19-74 Impedance Spectroscopy Study of Ag/CNT/Epoxy Nano-Composite

Fizah Dilshad, Pakistan

19-76 Synthesis and Dielectric Properties of Lanthanum Substituted Beta Ferrites

Imran Sadiq, Samreen Saeed, Pakistan

19-77 Industrial Process for Synthesis of ZnO Powder Using Wet Chemical Precipitation Method

Syed Muhammad Ishaq, Sahid Bhutto, Hassan Khattak, Muhammad Bilal, Sheikh Muhammad Umer, Bilal Hasan, Muhammad Yasir Khan, Muhammad Umar, Ahmed Hassan, Pakistan

Oct 18, 2019

of 29

19-79 Influence of Ca Substitution on the Structural, Electrical and Electrical Polarization of Sr Based R-Type Hexagonal Ferrites

Imran Sadiq, Muhammad Junaid Amin, Pakistan

19-80 Study of Effects of Cooling Rate on Microstructural Evolution of FeCrCo Alloy

Salman Waqar, S. Akbar, Ali Haider, Iftikhar us Salam, Saleem Akhtar, Pakistan

19-82 Laser Surface Texturing on an Aerospace Alloy with Sub-Micron Size Ti/TiN Coating

Irfan Nadeem, Anjum Tauqir, Rehan Akhter, Pakistan

19-84 Investigation of Structural, Electric Polarization and FTIR Properties for Lanthanum Substituted β-Ferrites.

Imran Sadiq, Muhammad Shahbaz Qureshi, Pakistan

19-87 Sythesis of Al Doped ZnO Thinfilms and Modification of their Electrical Properties

Muhammad Adnan, Aftab Akram, Pakistan

19-89 Effect of Carbon on the Mechanical Properties of Rapidly Solidified Alloys

Sardar Farhat Abbas, Ju Young Cho, Bum Sung Kim, Taek Soo Kim, South Korea

19-92 Role of Rare Earth Elements in Magnetic Phase Transition of R-Type Hexagonal Ferrites

Imran Sadiq, Mishal Idrees, Pakistan

19-95 Three Dimensional Microstructural Investigation of Silicon Carbide Composite Materials

Fareeha Hameed, L. Mancini, H. Tatlisu, S. Tosti, A. Moriani, Pakistan

19-97 Synthesis of Transparent Heaters Using Silver Nano Wires. Arbaaz Ali, Muhammad Yousuf Hassan, Arsalan Siddique, Pakistan

19-98 Parametric and Failure Analysis of Silicon Cell on Photovoltaic Modules Under Hail Load

Hafiz Basit Ali, Arsalan Ahmad, Rizwan M.Gul, Pakistan

19-99 Effect of Nickel Addition on the Morphology and Electrochemical Behaviour of Zn-Ni Alloy Coating

Ameeq Farooq, Hamna Sajjad, Sohaib Ahmad, Kaab Bin Tayyab, Kashif Mairaj Deen, Pakistan

19-100 Influence of Cold Rolling on the Electrochemical Behavior of 316L (X2CrNiMo 17-13-2) Stainless Steel

Kaab Bin Tayyab, Ameeq Farooq, Abdul Basit Nadeem, Taqi Zahid Butt, Pakistan

Oct 18, 2019

of 29

19-102 A Smart, High Performance Frequency Selective Metamaterial Absorber for S-Band

Hassaan Anasri, Muhammad Adeel Aleem, Danish Malik, Mustehsin Ali, Sidra Hussain, Sara Qaisar, Pakistan

19-103 Improved Drying Efficiency of an Indigenously Developed Solar Food Dehydrator with Advanced Features

Afnan Haider Khan, Muftooh Ur Rehman Siddiqi, Riaz Muhammad, Saqib Muhammad, Ihtisham ul Haq, Pakistan

19-104 Effect of Magnetomechanical Coating Thickness in Beam Structures

Shoaib Nadeem, Imran Aziz, Hasan Aftab Saeed, Pakistan

19-106 Characterization of NiCrMo Dental Restoration Alloy Ali Haider, Omar Farooq Azam, Muhammad Talha, Saleem Akhtar, Pakistan

19-111 Cancer Theranostics with Magnetic and Janus Nanoparticles M. Zubair Iqbal, China

19-113 Structural, Morphological, Mechanical and Optical Modifications in PMMA Thin Films Induced by Laser Produced X-Rays

Saman, Muhammad Shahid Rafique, pakistan

19-117 Temperature and Electric Field Dependent Phase Transformations in [001] PMN-PT Single Crystal

Ghulam Shabbir, Khurram Shahzad, Ammad Hussain Qureshi, Pakistan

19-118 NdFeB Magnets with Superior Magnetic Properties Asif Ali, Shahid Imran, Hamza Afzal, Aamir Nusair Khan, Saleem Akhtar,

Pakistan 19-120 Microstructure, Magnetic Properties and Thermal Stabilities of

Isotropic Alnico Ribbons Prepared by Melt Spinning Method Sajjad Ur Rehman, Zhenchen Zhong, Qingzheng Jiang, China

19-131 Solar Light Responsive Bismuth Doped Titania with Enhanced Ti3+for Efficient Photocatalytic Degradation of Flumequine: a Mechanistic Role of Peroxymonosulphate

Ikhtiar Gul, Murtaza Sayed, Pakistan

19-133 Grain Size Refinement of Ni Containing Age-Hardenable High Alloy Steel

Muhammad Haroon Qaiser, Imran Nazir, Ahnaf Usman, Amjad Ali, Hamid Zaigham, Pakistan

19-135 Nitrogen Doped Carbon Quantum Dots and GO Modified WO3 Nanosheets Combination as an Effective Visible Photo Catalyst

Shamaila Sajjad, Pakistan

Oct 18, 2019

of 29

19-138 Tailoring the Electrical and Optical Characteristics of GaAs Thin Film by 2 MeV Ni Ions Irradiation

Waqar Adil Syed, Pakistan

19-141 Study of Modified Graphene Polyamide-6 Composites as Coating Material

Usman Ali, Pakistan

19-142 Comparative Study of Structural and Transport Properties in RE-Substituted Cobalt Ferrites Nanoparticles

Muhammad Kamran, Pakistan

19-143 Deposition and Characterizations of Germanium Thin Films on Silicon Based Substrate

Eisha Butt, Pakistan

19-144 Structural Analysis of Al-CNT Nanocomposite Using X-Ray Diffraction

Muhammad Mansoor, Liaqat Ali, Pakistan

19-145 Soldering to Gold Thin Films Using Indium Rich Silver Eutectic Alloys


19-146 Microstructural Evaluation of Cold Rolled Austenitic Steel using X-Ray Diffraction

Muhammad Mansoor, Pakistan

19-147 Impact Strength Amelioration of AISI 1020 Steel using Thermal Treatments


19-148 Effect of High Temperature Exposure on Microstructure of Inconel 718

Nouman Zubair, Pakistan

17:15-17:25 Ice Cream Break


Wednesday, October 23, 2019 Time 09:00-10:40

Chairperson: Lin Liu and Ali Dad Chandio

09:00 19- N5 KN- Titanium and Titanium alloys: An Overview Abdul Wadood, Pakistan

09:40 19-123 Predicting the Multiaxial Response of Ti-Aluminide Alloy at Elevated Temperatures

Kamran Nikbin, United Kingdom

Oct 18, 2019

of 29

10:00 19-109 Microstructure, Property and Processing Relationship of Ni Base Superalloy

Syed Shehzad Raza, Tahir Ahmad, Muhammad Kamran, Muhammad Umar Manzoor, Aqil Inam, Pakistan

10:20 19-6 Synthesis of Metal Oxide based Nano Formulations of Leukotriene and COX-2 Inhibitors and its Application for Inflammation Therapy

Syeda Sohaila Naz, Sulaiman, Shabir Ahmad, Sara Qaisar, Pakistan

10:40-11:00 Tea Break



Chairperson: Kamran Nikbin and Naureen Akhtar

11:00 19-101 KN Amorphous Alloys and Amorphous Coatings: Processing and Applications

Lin Liu, China

11:40 19-200 KN Electrophoretic Deposition of Gentamicin Loaded Chitosan/Gelatin/Bioactive Glass Composite Coatings on PEEK/Bioactive Glass Layers: A Comprehensive Study on in Vitro Bioactivity and Antibacterial Effect

Muhammad Attiq Ur Rehman, Aldo R. Boccaccini, Pakistan

12:20 19-140 A System of Alternation TiO2 and MgF2 Multilayer Antireflection Coatings for Optoelectronic Devices

Waqar Adil Syed, Pakistan


Session 16 Wednesday, October 23, 2019 Time 14:00-15:40

Poster Competition: Surface Modification & Smart Coatings (For Judges & Presenters: Evaluation of Posters During 11:00-12:40)

Chairperson: Poster Judges

SMSC-01 (2019-72)

Development of Zinc Dust Pigmented Surface Tolerant Epoxy Coating on Salted Contaminated Steel Surfaces

Nouman Akram, Amir Nadeem, Muhammad Danial, Ameeq Farooq, Abdus Salam, Pakistan

SMSC-02 (2019-252)

Microsecond Laser Texturing of an Aerospace Grade Aluminum Alloy to Synthesize Hydrophobic coating

Aneeqa Naeem, Esham Butt, Hamza Khawaja, Irfan Nadeem, Rehan Akhter,

Oct 18, 2019

of 29

Anjum Tauqir, Pakistan

SMSC-03 (2019-172)

Electrophoretic Deposition of HA on Mg-Zn-Zr Alloy and Its In-Vitro Degradation Behavior in Ringer's Solution

Qanita Tayyaba, Pakistan

SMSC-04 (2019-137)

Mo Alloying and Laser Surface Melting of St-12 Hardfacings Doubles the Sliding Wear Resistance


SMSC-05 (2019-96)

Surface Modification of AZ31B Magnesium Alloy by Microarc Oxidation Method

Saleem , A. Farooq, K. B. Tayyab, A. Salam

SMSC-06 (2019-173)

Laser Cladding to Improve Behavior of Air-Plasma Sprayed Ni-20Cr Coating on Stainless Substrate

M. Rauf, S. Bano, R. Qayyume, M. Shahid, K. Mehmood SMSC-07 (2019-259)

Effect of Plasma Nitriding on Properties of Chromated AA2024 Alloy

Haziq Hanif, Aneela Wakeel, Riffat Asim Pasha, Pakistan

SMSC-08 (2019-166)

Rapid Solidification and Laser Surface Alloying to Generate Thin Metastable Surfaces

Shazeen Akhtar, Pakistan

SMSC-09 (2019-243)

Influence of Addition of Boron Carbide Nano-Particles Through Friction Stir Processing on Wear Properties of Aluminum Alloy AA-7075

Shaher Bano, Pakistan

SMSC-10 (2019-271)

Effect of Titanium Interlayers on Corrosion and Wear Behavior of TiN PVD Coated Stainless Steel

Awais Awan, Riffat Asim Pasha, Rizwan Ahmed Malik, Pakistan

SMSC-11 (2019-134)

Evaluation of Titanium Nitride Modified Bondcoat System Used in Thermal Barrier Coating in Corrosive Salts Environment at High Temperature

Muhammad Haroon Qaiser, Imran Nazir, M. Shahid, Amir Nusair Khan, Amjad Ali, Hamid Zaigham, Pakistan

SMSC-12 (2019-139)

Structural and Photocatalytic Properties of SnO2 Nanorods Decorated Graphene Nanocomposites

Tahira Qamar Nisar, Tahira, Pakistan

SMSC-13 (2019-150)

Effect of Deposition Time and Heat Treatment on Structural and Mechanical Properties of Ni3Al Coating Deposited by Air Plasma Spraying on Tool Steel

Sabah Zaman, Khalid Mehmood, Pakistan

Oct 18, 2019

of 29

SMSC-14 (2019-156)

Effect of Cr2O3Coating on AC and DC Magnetic Properties of Maghamite Nanoparticles

Naman Ahmed, Naman, Aqib Javed, Faisal Zeb, Muhammad Kamran, Kashif Nadeem, Heinz Krenn, Pakistan

SMSC-15 (2019-151)

Structural and Optical Properties of Ni Doped La2O3 Nanosheets

Sadaf Siddique, Pakistan

SMSC-16 (2019-287)

In-Vitro Study of Commercially Pure Titanium After Ultrasonic Surface Mechanical Attrition Treatment (SMAT)

M. K. Yaseen, Pakistan

SMSC-17 (2019-292)

Development of Durable Superhydrophobic Composite Coating for Wood Materials

Syeda Maryam Shah, Tayyab Subhani, Usama Zulfiqar, Pakistan

SMSC-18 (2019-163)

Minimized Surface Energy of ZrO2Coated MnFe2O4 Nanoparticles

Faisal Zeb, Muhammad Ishaque, Kashif Nadeem, Muhammad Kamran, Heinz Krenn, Dorothée Vinga Szaboo, Ulrich Brossmann, I. Letofsky-Papst, Pakistan

SMSC-19 (2019-212)

Mitigating Sulfate Vanadate Hot Corrosion of Yttria Stabilized Zirconia (YSZ) Coatings

Noveed Ejaz, Muhammad Mansoor Malik, Liaqat Ali, Pakistan

SMSC-20 (2019-217)

Oxidation Resistant Aluminide Coating on a Columbium Alloy

Noveed Ejaz, Muhammad Mansoor Malik, Kamran Yasin, Hamid Zaigham, Muhammad Nouman malik, Muhammad Khalid, Muhammad Asad, Khalid Mehmod, Pakistan

SMSC-21 (2019-220)

Wear Behavior of Ni3Al Coatings at High Temperature Deposited by Air Plasma Spraying System

Khalid Mehmood, Pakistan

SMSC-22 (2019-224)

Failure Analysis of a Nitrided Steel Block


SMSC-23 (2019-225)

Comparison of Structural and Magnetic Properties of Uncoated and Crystalline TiO2 Coated CoFe2O4 Nanoparticles

Muhammad Zareef Khan, Kashif Nadeem, Pakistan

SMSC-24 (2019-228)

Prediction of Localized Fatigue Behavior of Functionally Graded Nanocrystalline Top Layer Produced by Ultrasonic Surface Mechanical Attrition on Pure Titanium

Muhammad Mansoor, Noveed Ejaz, Hamid Zaigham, Pakistan

SMSC-25 (2019-250)

Development of Hard Coating and Laser Surface Texturing on Light Aerospace Grade Alloy to Deposit Solid Lubricant for

Oct 18, 2019

of 29

Application in Space

Irfan Nadeem, Rehan Akhter, Aamer Nusair Khan, Anjum Tauqir, Pakistan

SMSC-26 (2019-256)

Fabrication and Characterization of Flexible BNT Film by Electrophoretic Deposition Technique

Muhammad Asif Rafiq, Adnan Maqbool, Imran Hussain Khan, Gul Hameed Awan, Abbas Saeed Hakeem, Pakistan

SMSC-27 (2019-268)

Hot Corrosion of Yttria-Stabilized Zirconia Coating, in a Mixture of Sodium Sulfate and Vanadium Oxide at 950 oC

Qadeer Ahmed, Pakistan

SMSC-28 (2019-269)

Development of Surface Hybrid Composites by Friction Stir Processing to Improve the Tribological Properties of Aluminum Alloy 6061-T6

Talha Ahmed, Zaheer Mushtaq, Wali Muhammad, Hamid Zaigham, Pakistan

SMSC-29 (2019-211)

Facile Fabrication of Hydrophobic/Oleophilic Tri-Junctions of Silica with Activated Carbon and Graphene Oxide for Rapid Oil Spill Cleanup

Attika Malik, Shamaila Sajjad, Pakistan

SMSC-30 (2019-226)

Binary Hetero-Structure of Al2O3 with SnO2 A Potential Photo Catalyst

Maria Masood, Shamaila Sajjad, Pakistan

SMSC-31 (2019-157)

Unusual Magnetic Splitting in M-H Loops of SiO2 Coated NiO Nanoparticles

Hur Abbas, Kashif Nadeem, Heinz Krenn, Pakistan

SMSC-32 (2019-222)

Effect of Hard Chrome Layer on the Tribological Behaviour of the Pressurized Steel Tubes


SMSC-33 (2019-216)

Failure of a Thrust Augmenter Flap due to Coating Degradation

Noveed Ejaz, Muhammad Mansoor Malik, Muhammad Nouman malik, Kamran Yasin, Hamid Zaigham, Pakistan

15:40-16:00 Tea Break



Chairperson: Zulfiqar A Khan and Shahid Bhutto

11:00 19-43 KN Characterization of Drug-Delivery Related Materials by Transmission Electron Microscopy

Dalaver H. Anjum, Saudi Arabia

Oct 18, 2019

of 29

11:40 19-42 Effect of Nano Dispersant Additions to the Electrodes for Aluminum Electrolysis

Shahid Akhtar, Norway

12:00 19-23 Rapid Solidification and Laser Surfaces Alloying to Generate Thin Metastable Surfaces

Shazeen Akhtar, Anjum Tauqir, Pakistan

12:20 19-2 Experimental Investigation of Fracture Toughness of Ti 6Al 2Sn 4Zr 6Mo using Micro Vickers and Nano Indentation Technique

Muhammad Irfan Khan, Pakistan




Chairperson: Taek Soo Kim and Muneeb Asim

11:00 19-N1 KN

Basit Yameen, LUMS, Pakistan.

11:40 19-121 Temperature-Deformation Relations in Reversibility of Shape Memory Alloys

Osman Adiguzel, Turkey

12:00 19-242 Mechanical Properties of Aged-TiNiPdCu High Temperature Shape Memory Alloys

Saif ur Rehman, Mushtaq Khan, Aamer Nusair Khan, Syed Imran Husain Jaffery, Liaqat Ali, Mohammad Khurram, Pakistan

12:20 19- Flexible piezoelectric nano-generator based on ZnO structure for energy harvesting

Adnan Maqbool, Pakistan



Thursday, October 24, 2019 Time 09:00-10:40

Chairperson: D. H. Anjum and Yasir Nawab

09:00 19-3 KN Unsolved Issues in Various TiNi Based High Temperature Shape Memory Alloys

M. Imran Khan, Pakistan

09:40 19-108 KN Residual Stress Study of Nickel Aluminide Coatings Deposited Onto Super alloys

Oct 18, 2019

of 29

Ali Dad Chandio, Pakistan

10:20 19-46 Impedance Spectroscopy Study of Ag/CNT/Epoxy Nanocomposite

Fizah Dilshad, Fizah Khan, Qaribullah, M. Adeel Aleem, M. Asjad, M. Saleem Mirza, Sara Qaiser, Pakistan

10:40-11:00 Tea Break

Session 20 (Lecture Room No 1) Thursday, October 24, 2019 Time 11:00-12:40

Popular Talks

Chairperson: Tahir I. Khan and Walayat Hussain

11:00 PT-01 Bio Materials, Tissue Engineering and Regenerative Medicines: The World and Us

Aqif Anwar Chaudry, Pakistan

11:50 PT-02 Prospective of Lithium Ion Batteries

Ghulam Murtiza, Pakistan




Chairperson: Ahmed Shibli and Shahid Akhtar

14:00 19-41 KN Characterization of Organic Solar-Cell Nano-Materials by Using Advanced Techniques of Transmission Electron Microscopy

Dalaver H. Anjum, Saudi Arabia

14:40 19-154 High Temperature Oxidation Studies of Low Carbon Alloy Steel Ijaz Ahmad, W.Q Khan, Syed Arslan Azhar, Ahmad Iqba, Pakistan

15:00 19- Development of 3D Titanium Structures Kamran Nikbin, United Kingdom

15:20 19-13 Characterization of the Aniline DBSA/ Thermoplastic Polyurethane Blends for the Thermo-Mechanical and Electro-Mechanical Properties

Iqra Abdul Rashid, Pakistan

15:40-16:00 Tea Break


Oct 18, 2019

of 29


Chairperson: Muhammad Shahid and Shaheed Khan

14:00 19-49 In-situ Condition Monitoring Techniques Applied in Surface Engineering

Zulfiqar A Khan, United Kingdom

14:20 19-90 Effect of Carbon on the Mechanical Properties of Rapidly Solidified Alloys

Taek Soo Kim, Sardar Farhat Abbas, South Korea

14:40 19-129 Design Development and Characterization of Super Hydrophobic Surface Coating on Wood Materials

Shahid Hussain Abro, Sameen Fatima, Sidra Abad, Iqra Ashraf, Tooba Rahim, Pakistan

15:00 19-203 Synthesis and Electrochemical Characterization of Non-Precious Metals Electro-Catalysts for Proton Exchange Membrane Fuel Cell (PEMFC) Application.

Afaf Ali, Shahbaz Ahmad, Saim Saher, Pakistan

15:20 19-181 A Smart, High Performance Frequency Selective Metamaterial Absorber for S-Band

Danish Malik, Pakistan

15:40-16:00 Tea Break



Chairperson: Kim Bum Sung and Saif ur Rehman

14:00 19-152 Additively Manufactured 316L Stainless Steel as an Efficient Electrocatalyst

Waseem Haider, USA

14:20 19-10 Effect of Particles Size Variation on the Microstructure, Mechanical and Corrosion Properties of TiNi- Nano Silica Reinforced Composites

Mairaj Ahmad, Muhammad Imran Khan, Syed Abbas Raza, Rashid Ali Sindhu, Danish Tahir, Pakistan

14:40 19-83 Preparation and Characterization of Nano Crystalline Cellulose form Phragmites Karka

Syed Burhanuddin Abdali, Pakistan

15:00 19-158 Micro-Emulsion Based Templated Synthesis of Manganese Oxide Nano Rod Catalyst for Oxidation of Toluene: Experimental and Computational Approach

Oct 18, 2019

of 29

Ataf Ali Altaf, Pakistan

15:20 19-199 Catalytic Degradation of Chloramphenicol by Bismuth Doped Nano Zerovalent Iron

Aamir Khan, Pakistan

15:40-16:00 Tea Break

Session 24 Thursday, October 24, 2019 Time 16:00-17:15

Poster Session-II Chairperson: Poster Judges

19-153 Spatial Investigation of Electronic Properties in Composite Electrolytes for Solid Oxide Fuel Cells Using Embedded Probes

Atif Khan Niaz, Hyung-Tae Lim, South Korea

19-155 Microstructure and Magnetic Properties of High Performance Dy Free NdFeB-Alnico Nano Crystalline Magnetic Alloys

Sajjad Ur Rehman, Qingzheng, Zhenchen Zhong, China

19-159 High Electro-catalytic Activity and Low Charge Transfer Resistance of Cobalt-Nickle/Polypyrole (Co0.1Ni0.1/Ppy) Nanocomposites Based Counter Electrodes Used for Dye Sensitized Solar Cells

Naeem Ahmad, Adnan Gulab, Abdul Wahab, Nasima Arshad, Pakistan

19-160 Synthesis of Naproxen Nano formulations and their Biomedical Applications

Sulaiman, Pakistan

19-161 Thermal Study of High Temperature Elastomer Blends Muhammad Sarfraz Nawaz, Pakistan

19-162 Synthesis and Characterization of Titania Nanotubes by Anodizing Titanium in Fluoride Containing Electrolytes as Effected by PH and Anodic Potential

Akhlaq Ahmad, Ehsan Ul Haq, Furqan Ahmed, Muhammad Arshad, Muhammad Nadeem, Muhammad Awais Altaf, Pakistan

19-165 Novel Graphene-Titania Interfaces as a Potential Catalytic Material Towards Clean Energy Production

Naila Jabeen, Naila, Pakistan

19-167 Development and Characterization of Sustainable Construction Material (Geopolymer Concrete)

Saira Niaz, Pakistan

Oct 18, 2019

of 29

19-169 Electrical Analysis of Bismuth Based Cobaltites with Samarium Contents Under Influence of Temperature

Yasir Abbas, Muhammad Anis-ur-Rehman, Pakistan

19-170 Minimization of Energy Losses by Doping Cerium in Hexaferrites.

Rizwan Khalid, M. Anis-ur-Rehman, Pakistan

19-171 Structural and Electrical Response of Composite Li-Cobaltite Nanoparticles

Sammar Tayyab, Muhammad Anis-ur-Rehman, Pakistan

19-174 Bottom-Up Or Top-Down? an Approach to Gas Pipeline Integrity Management System.

Muhammad Hussain, Tieling Zhang, Richard Dwight, Australia

19-175 Microwave Absorption Properties of Barium-Strontium Hexaferrites Prepared by WOWS Sol-Gel Method

Uzma Afsar, Nahall Niazi, Faiza Arif, M. Anis-ur-Rehman, Pakistan

19-177 Conduction Properties in RE Doped Nano-Tellurides for Energy Applications

Faiza Arif, Nahall Niazi, Uzma Afsar, M. Anis-ur-Rehman, Pakistan

19-178 Strontium Hexaferrites Prepared by Co-Precipitation Method: the Role of Dopant on Structural and Electrical Properties

Nahall Niazi, Faiza Arif, Uzma Afsar, M. Anis-ur-Rehman, Pakistan

19-179 Non Precious Metal Catalysts: A Fuel Cell and ORR study of Thermally Synthesized Nickel and Platinum mixed Nickel nanotubes for PEMFC

Shahbaz Ahmad, Pakistan

19-180 Study of Electrical Properties of Bismuth Telluride Selenide Muhammad Tahir, Muhammad Anis-ur-Rehman, Pakistan

19-182 Correlation of Structural and Electrical Properties of Ceria Based Oxides Rohi Zahra, Muhammad Anis ur Rehman, Pakistan

19-184 Mechanical Properties of Friction Stir Welded AA 2014-T6 with Different Travel Speeds

Talha Ahmed, Hamid Zaigham, Mustasim Billah Bhatty, Ahnaf Usman, Pakistan

19-185 Enhanced Mechanical Properties of AA-6061 Joints Using B4C Nano-Reinforcement by Friction Stir Welding

Umama Javed, Faisal Mustafa, Muhammad Umar Farooq, Syed Wilayat Husain, Pakistan

19-186 Comparison of Mechanical Properties of Friction Stir Welded

Oct 18, 2019

of 29

AA 6061 Thick Plates in Different Heat Treatment Conditions Talha Ahmed, Hamid Zaigham, Mustasim Billah Bhatty, Ahnaf Usman,

Pakistan 19-188 An Innovative Technique to Estimate Thickness of Hard

Submicron Size Coatings on Soft Substrate Irfan Nadeem, Aamer Nusair Khan, Anjum Tauqir, Pakistan

19-190 A New Electrode and Spectroelectrochemical Method to Study Highly Oxidized Iron Species in Metalloenzyme

Afsar Khan, Abdul Naeem, Denis A. Proshlyakov, Grant LeVasseur, Pakistan

19-192 Investigation of Effect of Heat Treatment and Heat Input on Microstructure and Mechanical Properties of Friction Stir Welded Butt Joint of AA 6061

Shaher Bano, Hamza Afzal, Talha Ahmed, Muhammad Umar Farooq, Hamid Zaigham, Pakistan

19-193 Influence of Addition of Boron Carbide Nano-Particles Through Friction Stir Processing on Mechanical Properties of Aluminum Alloy AA-7075

Shaher Bano, Muhammad Umar Farooq, Rehan Qayyume, Mudassar Rauf, Talha Ahmed, Hamid Zaigham, Pakistan

19-194 Replacement of MgO Powder with Alumina Ceramic Beads for Development of Immersion Heater for Oil Refineries

Anjum Shahzad, Pakistan

19-195 Comparative Study of Frequency Dependent Transport Properties in Cobaltite Nanoparticles Synthesized by Wet Chemical Methods

Tanveer Akhtar, Muhammad Anis-ur-Rehman, Pakistan

19-197 Corrosion Protection of ASTM A516 Through Surface Passivation

Muhammad Ali Khan, Aqueel Shah, Syed Husain Imran, Mushtaq Khan, Pakistan

19-201 Effects of Coolant Media on Machining of Titanium Alloy Muhmaad Ali, Syed Husain Imran, Mushtaq Khan, Shahid Ikramullah Butt,

Aamir Jalil, Pakistan 19-205 Self-Assemble Synthesis of Silver Nanoparticles by Base

Hydrolyzed Extracts of Bioactive Phenolic Compounds from Wheat Flour

Aqsa, Ayaz Ali Memon, Shahabuddin Memon, Pakistan

19-206 Optimization of Super Plastic Forming Parameters of AA5083 for Aerospace and Automotive Applications

Tayyaba Zaman, Rehan Qayyume, Chaoli Maa, Pakistan

Oct 18, 2019

of 29

19-207 Flexible Body Armor Utilizing Shear Thickening Fluids Based on Nanosized Silica Particles

Syed Khalid Mehmood Shah, Pakistan

19-209 Microwave Assisted Synthesis of Porous NiCo2O4 Microspheres: Application as High Performance Asymmetric and Symmetric Supercapacitors with Large Areal Capacitance

Syed Khalid Mehmood Shah, Pakistan

19-213 A Chimie Douce Route to Synthesize CPH-Neodymium Oxide Powder

Noveed Ejaz, Liaqat Ali, Gul Hameed, Furqan Ahmed, Muhammad Mansoor, Pakistan

19-214 Graphene Oxide Reinforced Natural/Synthetic Based Nanofluid for Enhanced Oil Recovery Application

Sadia Sagar Iqbal, Asad Mehmood, Pakistan

19-215 Quantitative Analysis of Modifications in Ultra High Molecular Weight Polyethylene Caused by e-Beam Irradiations Using Polarized Light Spectroscopy

Manzoor Ahmad, Malik Sajjad Mehmood, Pakistan

19-218 Influence of Temperature on Structural and Electrical Properties of Cr-Zn Substituted M-Type Strontium Hexaferrite Nanomaterials.

Sana, M. Anis-ur-Rehman, Pakistan

19-223 Metallurgical Investigation of Thick-Walled Cylinder Khalid Mehmood, Pakistan

19-227 Synthesis of Graphene-Tin Oxide Nanostructured Thin Films as Effective Electron Transport Layer

Amjid khan, Pakistan

19-229 Low Temperature Fused Slurry Silicide Coating of R512E Powders Over Nb Alloy C-103


19-230 Effect of Flakes Morphology on Tribological Characteristics of Grey Cast Iron

Muhammad Kamran Yaseen, Muhammad Mansoor, Noveed Ejaz, Pakistan

19-231 Blended Polymer Composites: Ablation, Thermal and Mechanical Aspects

Sadia Sagar Iqbal, Arshad Bashir, Ali Bahadar, farzana siddique, Waheed Gull, Pakistan

19-232 Generation of Micro Porosity Within PVDF Laminate Membranes for the Study of Permeation Flux of Various

Oct 18, 2019

of 29

Solvents Generation of Micro Porosity Within PVDF Laminate Membranes for the Study of Permeation

Sadia Sagar Iqbal, Arshad Bashir, Ali Bahadar, farzana siddique, Waheed Gull, Pakistan

19-233 Role of Heat Treatment in Synthesis of Nanostructured Multiferroic BiFeO3 Perovskite

Saboohi Aftab, Waqar Mehmood, M.S.Awan, Pakistan

19-234 Cobalt Doped Iron Sulfide Nanostructures Ayesha Jamal, Waqar Mahmood, Sadia Khalid, Pakistan

19-235 Mechanical and Magnetic Properties of Zinc Oxide Nanoparticales Induced in Polymer Reinforced Composites

Atia Zafar, Hadia Noor, Saira Riaz, Shahzad Naseem, Pakistan

19-237 Studies of Optical Properties of SiO2-Al2O3 Composites Hadia Noor, Sobia Latif, Saira Riaz, Shahzad Naseem, Sundas Mahmood,

Pakistan 19-238 Development of Highly Sensitive UV Sensor Using Morphology Tuned

ZnO Nanostructures Nazar Abbas Shah, Pakistan

19-241 EFfect of Deep Cryogenic Treatment on Corrosion Behavior of AISI 4340 Steel

Zubia Anwer, Pakistan

19-247 Electrical Properties of 0.36BiScO30.64PbTiO3 Ceramic Doped with Calcium Fluoride

Ghulam Shabbir, Khurram Shahzad, Pakistan

19-248 Effect of Sn Content on Structure and Piezoelectric Properties of Pb(Zr0.35Ti0.65)1-XSnxO3

Haseeb Haroon, Pakistan

19-251 Magnetic and Magnetothermal Properties of Gd5Si4 and Gd5(SixGe1-X)4 Nanoparticles

M Hisham Alnasir, Sadia Manzoor, Pakistan

19-253 Development of Highly Sensitive UV Sensor Using Morphology Tuned ZnO Nanostructures

Murrawat Abbas, Pakistan

19-254 Superior Shuttling of Lithium and Sodium Ions in Manganese Doped Titania at Functionalized Multiwall Carbon Nanotubes Anode

Asim Khan, Pakistan

19-257 Investigation of Structural and Optical Characterization of

Oct 18, 2019

of 29

CZTS Thin Films Hadia Noor, Aftab Ahmad, Adnan Ali, Pakistan

19-258 Synthesis and Characterisation of Activated Carbon from Coconut Shell and Its Role in Adsorption of CO2

Syed Zain ul Abedin, Shayan Ahmed, Ali Shamroz Khan, Talha Yasin, Ali Dad Chandio, Pakistan

19-261 Frequency Analysis of Bi-Layered Thick Functionally Graded Cylindrical Shells by using First Order Shear Deformation Theory

Shahid Hussain Arshad, Zohib Akram, Pakistan

19-262 Lithium and Magnesium Co-Doped with Nickel Oxide Thin Film as Charge Transport Layer for Inorganic Perovskite Solar Cell

Abdul Rehman, Pakistan

19-263 Synthesis and Optical Characterization of ZnS Thin Film Deposited by Chemical Bath Deposition Technique

Hafiz Muhammad Shammas Mushtaq, Pakistan

19-265

Electrical and Magnetic Properties of Gd Doped Ba0.75Sr0.25Fe12-xGdxO19 Nanoparticles

Zain Nawazisch, Anis-ur-Rehman, A. ul Haq, Pakistan

19-266 Impact of Gd Doping on the Dielectric and Magnetic Properties of Sr0.5Ba0.5Fe12O19 Nanoparticles

Arsalan Liaquat, Anis-urrehman, A. ul Haq, Pakistan

19-267 Synthesis and Characterization of Graphene Sheets from Graphite Through Electrochemical Exfoliation and Microwave Reduction

Arshad Hussaun Wazir, Arshad Hussain, Arshad Hussain Wazir, Pakistan

19-272 Estimation of the Annealing Effect on Structural, Optical and Electrical Properties of NiO Thin Films Prepared Using Low Cost Sol-Gel Process

Muhammad Zain ul Abdin Khan, Muhammad Yasir Khan, Shaharyar Hashmi, Sarim Ahmed Khan, Salman Khan, Rahat Ali, Abdullah Bin Amir Sultani, Pakistan

19-273 Synthesis of Graphene Oxide Nanostructures and Its Application in Drinking Water Purification

Mohsin Ali Lashari, Muhammad Yasir Khan, Omer Saeed, Syed Muhammad Ovais, Nasir Hussain, Mirza Adeel Baig, Bilal Ajmal, Pakistan

19-274 Novel Hybrid Method to Modify the Surface Features of Cobalt Doped Zinc Oxide Nanostructures Used as Photo-Anode Material in 3rd Generation Solar Cells: Dye Sensitized Solar Cells

Oct 18, 2019

of 29

Muhammad bin Ahmed, Pakistan

19-275 Parametric Study of Nd: YAG 500 W Pulsed Laser Cutting of 5 mm CFRP Sheet in Single Pass and Multipasses by Using Full Factorial Technique.

Shahid Mehmood, Pakistan

19-276 Mechanical and Microstructural Behavior of 42CRMO4 Low Alloy Steel After Different Hot Forging Reduction Ratios and Thermomechnical Treatment

Sultan Mehmood, Aneela wakeel, Pakistan

19-278 Gas Tungsten Arc Welding of High Strength Steel: Residual Stress Analysis and Hydrogen Embrittlement Investigations

Shahroz Sakhawat, Pakistan

19-279 Micro Plasma Arc Welding of Thin Austenitic Stainless Steel Sheets: Process Optimization, Weldments Characterization and Distortion Investigations

Shahroz Sakhawat, Sagheer Ahmed, Haris Naseem, Pakistan

19-280 Development of Welding Procedure for High Strength Quenched and Tempered Steel and Weldments Characterization

Umer Hayyat, Shahroz Sakhawat, Abul Rahman, Pakistan

19-281 Effect of Graphene on Mechanical Properties of Sandwich Panel for Aerospace Structures

Zainab Naseer, Zaffar M Khan, Pakistan

19-282 In-Situ Synthesis of 3D Ultra-Small Gold Augmented Graphene Hybrid for Highly Sensitive Electrochemical Binding Capability

Ayesha Taj, Ayesha Shaheen, Jie Xu, Pedro Estrela, Adnan Mujahid, Tayyaba Asim,M. Zubair Iqbal, Waheed S. Khan, Sadia Z. Bajwa, Pakistan

19-283 Programable Photo-Active Janus Dendrimersomes and Glycodendrimersomes as a Platform for the Encapsulation of Biologically Synthesized Silver Nanoparticles and Study of Protein-Glycan Interactions

Bilal Javed, Pakistan

19-284 Pd-Doped Zinc Oxide Nanostructures for Liquefied Petroleum Gas Detection at Low Temperature

Musarrat Jabeen, Azhar Iqbal, R Vasant Kumar, Mansoor Ahmed, Pakistan

19-285 Surface Modification of Sputtered Carbon Supercapacitor Electrode by Hydrogen Annealing

Muhammad Uzair Iqbal, Azhar Hussain, Ramzan Abdul Karim, Noor Zaman, Muhammad Shahid, Pakistan

19-290 Hard Anodization and Hybrid PEO Coatings on AZ-Series

Oct 18, 2019

of 29

Magnesium Alloys Zeeshan Ur Rehman, Dongjin Choi, South Korea

19-293 Comparative Study of Fracture Toughness of Weld Zone and Heat Affected Zone of Friction Stir Welded AA 6061

M. Umar, Hamza Afzal, Talha Ahmed, Hamid Zaigham, Pakistan

17:15-17:35 Ice Cream Break


Friday, October 25, 2019 Time 09:00-10:40

Chairperson: Naureen Akhtar and A. Cheikhrouhou

09:00 19-40 KN Aluminum (Al) Metal of Future Challenges and Applications: Light Weight is the Key

Shahid Akhtar, Norway

09:40 19-86 A Comparative Study of Microstructure, Mechanical Properties, Residual Stresses and Electrochemical Corrosion Behavior in TIG and Electron Beam Welding of Ti-5Al-2.5Sn Titanium Alloy

Asim Iltaf, Muhammad Tahir, Syed Abbas Raza, Massab Junaid, Fahd Nawaz Khan, Pakistan

10:00 19-60 Decipher Ultrasonic Signals from Defects in Thick Aluminum Extrusions to Identify Type and Origin of Defects

Lubaba Batool, Zukhruf Nawaz, Irsa Jahangir, Anjum Tauqir, Zeeshan Ahmad Abbasi, Pakistan

10:20 19-26 Physical and Mechanical Properties of Graphene Nanoplatelets Reinforced Al6061-T6 Composites Processed by Spark Plasma Sintering

Mahmood Khan, Pakistan

10:40-11:00 Tea Break

Oct 18, 2019

of 29



Chairperson: Shahid Akhtar and F. A. Khalid

11:00 19-51 KN "Invisible" Nanostructuring Provides Self-Cleaning in Optical Windows

Naureen Akhtar, Bodil Holst, Norway

11:40 19- Development of portable atomic force microscope for in-situ damage detection

Ahmed Shibli, UK 12:00 19-93 Fabrication of SF/HAp/Ce-Doped ZnO Nanoparticles Composite

Scaffolds a Potential Candidate for Orbital Floor Reconstruction Sehrish Sarfaraz, Pakistan

12:20 19-260 Phase Evolution, Microstructural Analysis and High Temperature Sintering Study of Magnesium Titanate Nanocrystals Derived from Hydrothermal Process Using Suspension Titania Precursor

Sumaira Naz, Shahid Khan Durrani, Mazhar Mehmood, Hassan Waqas, Ammad Hussain Qureshi, Pakistan




Chairperson: Taek Soo Kim and Muhammad Shoaib

11:00 19-17 KN Ammonium Ion Detection in Solution Using Vertically Grown ZnO Nanorod Based Field-Effect Transistor

Muhammad Yasir Khan, Pakistan

11:40 19-240 Evaluation of Potential of Uncoated Mesoporous Silica Capsules for Drug Delivery Applications

Tayyab Ali Khan, Syed Mujtaba ul Hassan, Jamil Ahmad, H. Waqas, Ahmad Khurshid, Mazhar Mehmood, Pakistan

12:00 19-39 EMI Shielding Properties of Polymer Blends with Inclusion of Graphene Nano-Platelets

Hafiz M Fayzan Shakir, Asra Tariq, Iqra Abdul Rashid, Ayesha Afzal, Pakistan

12:20 19-255 Effect of Heat Treatment on Microstructure and Mechanical Properties of Medium Carbon Low-Alloy Steel

Syed Bilal Hasan Rizvi, Ali Dad Chandio, Syed Muhammad Shabbir Madad, Muhammad Aftab Qureshi, Zulfiqar Ali, Pakistan

Oct 18, 2019

of 29




Chairperson: M A Barakat and S Burhanuddin

11:00 19-54 Sliding Friction Behavior of Sintered Ni-Cr Composites with Solid Lubricants

Amir Azam Khan, Wan Farhana Mohamad, Malaysia

11:20 19-44 Hybridization of Alumina and Graphene as an Effective Filler for Enhancement of Thermal Properties of Epoxy Composites

Muhammad Wasim Akhtar, Jong Seok Kim, Muddassir Ali Memon, M. Moazam Baloch, Pakistan

11:40 19-36 Multi-Functional Carbon Fiber Reinforced Composite Ayesha Afzal, Pakistan

12:00 19-94 Enhancement in Flexural Characteristics of Honeycomb Sandwich Structures for Diverse Core Configurations

Sohail Gohar, Muhammad Sohail Malik, Ghulam Hussain, Pakistan

12:20 19-21 Effect of Stearic Acid Modification on Mechanical and Physical Properties of Epoxy Composite Coating

Waseem Shehzad, Danish Tahir, Muhammad Ramzan Abdul Karim, Pakistan


0

Ahmed Shibli, United Kingdom Shaikh Asad Ali Dilawary ... · Oct 18, 2019 Page 2 of 29 Syed Abbas...

Documents

Transcript of Ahmed Shibli, United Kingdom Shaikh Asad Ali Dilawary ... · Oct 18, 2019 Page 2 of 29 Syed Abbas...