CONNECTIVITY IN AUTONOMOUS MOBILE MESH NETWORKS USING ONE-HOP NEIGHBOR INFORMATION UPDATE
Aglue Mesh Connectivity
-
Upload
jayendra-patil -
Category
Documents
-
view
5 -
download
0
description
Transcript of Aglue Mesh Connectivity
Proper mesh connectivity is created only if areas
Are properly connected.
Aglue/aovlap/aadd commands can be used to create connectivity between different areas.
fini/clear/prep7/title,agluek,1,0,0,0k,2,50k,3,50,100k,4,0,100k,5,50,40,0k,6,150,40,0k,7,150,70,0k,8,50,70,0a,1,2,3,4a,5,6,7,8et,1,plane42esize,7amesh,allaclear,allaglue,allamesh,all
Create two areas
k,1,0,0,0k,2,50k,3,50,100k,4,0,100k,5,50,40,0k,6,150,40,0k,7,150,70,0k,8,50,70,0a,1,2,3,4a,5,6,7,8
Observe that there is no common line in the definition of two areas.
Create area mesh..
et,1,plane42esize,7amesh,all
Observe improper mesh connectivity.
Clear the mesh and glue the areas
aclear,allaglue,all
Plot lines and list the areas.
Observe that line 8 is now common in both areas. Areas are now properly connected.
amesh,all
Observe proper mesh connectivity.