Agitator™ Systems...stick-slip, extended reach, and improved efficiency in all modes of drilling,...
Transcript of Agitator™ Systems...stick-slip, extended reach, and improved efficiency in all modes of drilling,...
nov.com/[email protected]
Benefits - Agitator and AgitatorPLUS Systems• Increases sliding and rotary ROP
• Increases the length for extended reach drilling
• Reduces downhole friction and stick-slip
• Improves weight transfer and toolface control
• Prevents weight stacking and drillstring buckling
• Extends bit life
The compression and friction forces that affect your drillstring downhole limit weight-on bit, reduce ROP, and can cause premature bit failure.
With the largest fleet and the most experience, our Agitator™ and Agitator™PLUS systems have provided unparalleled friction reduction through axial oscillation. These solutions have been proven by operators around the world in nearly 50,000 runs, and we provide support at 45 global service facilities. With an Agitator™ system in your drillstring, you can drill faster and drill farther.
Proven Friction Reduction, Improved Weight Transfer
Agitator™ SystemThe Agitator system reduces friction and improves weight transfer by
gently oscillating your drillstring. It also reduces fluctuations in weight
transfer to the bit. The result is enhanced toolface control, reduced
stick-slip, extended reach, and improved efficiency in all modes of
drilling, including rotary applications.
Since the oscillations are low magnitude and only affect the longitudinal
axis of your drillstring, the Agitator system does not cause the harmful
lateral vibrations that can damage downhole tools. The Agitator system
is compatible with all MWD systems.
Proven Applications• Directional drilling
• Wellbore intervention
• Fishing operations
Agitator™PLUS SystemThe AgitatorPLUS system combines our Agitator oscillation tool with
a special low pressure shock tool. Optimized to function as a unified
system, we have configured the AgitatorPLUS system with an overall
pressure drop of 300–400 psi. This allows you to maintain higher flow
rates, run the AgitatorPLUS system on rigs with limited pump pressure
capacity, and run two Agitator systems simultaneously in your BHA.
Proven Applications• Operations with limited pump capacity
• Extended reach drilling
• Tortuous well profile
Agitator™ Systems
Unconventional Essential
nov.com/[email protected]
Agitator™PLUS system increased sliding ROP by 18%.Location: Russia
Agitator™PLUS system successfully drilled 7,437 ft curve and lateral with an overall ROP of 143 ft/hr. Location: Eagle Ford
Agitator™ system and Bowen™ super fishing jar freed a 7,348 ft RSS BHA that had been stuck for four days. Location: Saudi Arabia
Agitator™ system improved ROP by 54% and reduced vibration levels.Location: Saudi Arabia
Agitator™ system enabled drilling twice as far and twice as fast, saving four days.Location: Africa
Agitator™PLUS system helped mitigate stick-slip to extend bit and motor life with 152% faster ROP.Location: China
Agitator™ system increased ROP by 57% and up to 48% less NPT.Location: Venezuela
Agitator™ system achieved equal performance as an RSS tool in horizontal drilling.Location: Argentina
Agitator™ system retrieved 253 m of tubing in 45 minutes without having to jar, minimizing casing damage.Location: Norway
Agitator™PLUS system drilled lateral with RSS 16% faster than RSS alone and 45% faster than motor alone.Location: Alaska
Agitator™ system improved ROP by 115% in the lateral section.Location: Africa
Agitator™ system drilled an entire curve and lateral in one run, saving 20.5 hours.Location: Marcellus
Vertical drilling
Lateral drilling
Curved drilling
RSS drilling
SWell drilling
Fishing
Hammer
Agitator™ system saved the customer $12.8k in the lateral section by increasing the sliding ROP by 22%, and total ROP by 25%.Location: Canada
Agitator™PLUS system combined with a FluidHammer tool outperforms a previous run with RSS, increasing ROP by 222%.Location: Mexico
Regardless of what they say,
no one else hasan Agitator™ System
Tool Size (OD)4 3/4 in 5 in 6 1/2 in 6 3/4 in
4 3/4 in (High Flow) 5 in (High Flow) 6 1/2 in (High Flow) 6 3/4 in (High Flow)
Overall length22.7 ft (LPST)* 23.9 ft (LPST)* 28.8 ft (LPST)* 25.8 ft (LPST)*
23.2 ft (LPST)* 24.4 ft (LPST)* 28.8 ft (LPST)* 26.6 ft (LPST)*
Weight 760 lbs 850 lbs 1,850 lbs 2,100 lbs
Recommended flow range 150-270 gpm 150-270 gpm 375-475 gpm 400-600 gpm
250-330 gpm 250-330 gpm 400-600 gpm 400-900 gpm
Temperature range 320°F 320°F 320°F 320°F
Operating frequency18-19 Hz @ 250 gpm 18-19 Hz @ 250 gpm 15 Hz @ 400 gpm 16-17 Hz @ 500 gpm
16-17 Hz @ 250 gpm 16-17 Hz @ 250 gpm 16-17 Hz @ 500 gpm 13-19 Hz @ 600-900 gpm
Optimal pressure drop generated 300-400 psi 300-400 psi 300-400 psi 300-400 psi
Max pull260,000 lbs 500,000 lbs 570,000 lbs 570,000 lbs
260,000 lbs 500,000 lbs 690,000 lbs 566,000 lbs
Connections 3.5 in IF pin/box 4 in GRANT PRIDECO, XT39 pin/box
4.5 in XH, 4 in IF pin/box, NC-46 pin/box
4.5 in IF pin/box
Tool size (OD) 3 3/4 in 4 3/4 in 5 in 6 1/2 in 6 3/4 in
8 in 9 5/8 in4 3/4 in (High Flow) 5 in (High Flow) 6 1/2 in (High Flow) 6 3/4 in (High Flow)
Overall length 10.25 ft / 15.7 ft (ST)*11.5 ft / 20 ft (ST)* 11.5 ft / 20 ft (ST)* 15.5 ft / 24.9 ft (ST)* 13.5 ft / 27.9 ft (ST)*
13 ft / 25.5 ft (ST)* 12 ft / 22.8 ft (ST)* 12 ft / 20.5 ft (ST)* 12 ft 15.5 ft 12.7 ft
Weight 240 lbs / 340 lbs (ST)* 310 lbs / 690 lbs (ST)* 498 lbs / 878 lbs (ST)* 900 lbs / 1700 lbs (ST)* 1,000 lbs / 1850 lbs (ST)* 1,600 lbs / 3200 lbs (ST)* 2,000 lbs / 4200 lbs (ST)*
Recommended flow range 90-140 gpm
150-270 gpm 150-270 gpm 375-475 gpm 400-600 gpm500-1,000 gpm 600-1,100 gpm
250-330 gpm 250-330 gpm 400-600 gpm 600-900 gpm
Temperature range 302°F 320°F 320°F 320°F 320°F 320°F 320°F
Operating frequency 26 Hz @ 120 gpm
18-19 Hz@ 250 gpm 18-19 Hz @ 250 gpm 15 Hz @ 400 gpm 16-17 Hz @ 500 gpm16 Hz @ 900 gpm 12-13 Hz @ 900 gpm
16-17 Hz @ 250 gpm 16-17 Hz @ 250 gpm 16-17 Hz @ 500 gpm 13-19 Hz @ 600-900 gpm
Optimal pressure drop generated 500-600 psi 500-600 psi 500-600 psi 500-600 psi 500-600 psi 500-600 psi 500-600 psi
Max pull 250,000 lb / 195,000 lbs (ST)* depends on service conn.
260,000 lbs / 300,000 lbs (ST)* 500,000 lbs/ 500,000 lbs (ST)* 570,000 lbs / 555,000 lbs (ST)* 570,000 lbs / 593,000 lbs (ST)*930,000 lbs / 872,000 lbs (ST)* 1,145,000 lbs
260,000 lbs 500,000 lbs 690,000 lbs 566,000 lbs
Connections2.375 in IF, 2.875 in IF, 2.875 in AMOH, 2.875 in Reg pin/box
3.5 in IF pin/box 4 in GRANT PRIDECO, XT39 pin/box
4.5 in XH, 4 in IF pin/box, NC-46 pin/box
4.5 in IF pin/box 6.625 in REG pin/boxNC-56 pin/box
7.625 in REG box up7.625 in REG pin down6.625 in REG pin down
nov.com/[email protected]
Agitator™ System
Agitator™PLUS System
Technical Specifications Reliability With Every Turn
With the most experience and more than 150 locations worldwide, we deliver the highest quality products, equipment, and support to meet the needs of your operation.
Each Agitator system from NOV includes tool and engineering support specific to your job requirements, as well as continuous monitoring and improvements. Everything we do is geared toward providing reliability and improving the efficiency of your operation.
When our solutions arrive at your drill site, we want to deliver performance - so you can.
*Includes NOV Shock Tool.
*Includes NOV Low Pressure Shock Tool.
nov.com/[email protected]
Corporate Headquarters7909 Parkwood Circle Drive Houston, Texas 77036, USA Phone: 713 375 3700 Fax: 713 346 7687
National Oilwell Varco has produced this brochure for general information only, and it is not intended for design purposes. Although every effort has been made to maintain the accuracy and reliability of its content, National Oilwell Varco does not warrant the accuracy or completeness of any data or information contained herein. National Oilwell Varco in no way assumes responsibility for any claim or liability for any loss, damage or injury related to or arising from the use and/or interpretation of the data and information contained herein. The user retains full responsibility for all inferences drawn or decisions made in connection with any such information and data or interpretations of such information and data, and all applications for the material described are at the user’s risk and are the user’s responsibility.
For a complete list of NOV Wellbore Technologies locations, visit us online:
nov.com/locationsw.nov.com/downholelocations
© 2015 National Oilwell Varco All Rights Reserved10107680-201-ENG-MKT-CDT41