AesculapSterileTechnology Instrument Organization...
Transcript of AesculapSterileTechnology Instrument Organization...
Aesculap Sterile TechnologyInstrument Organization System
A smarter way to organize and protect yourinstruments
• Protect delicate instruments• Organize large sets• Provide more efficient sterilization
2
Instrument Organization SystemOrganization and protection of surgical instruments
Aesculap’s new Instrument Organization System is anadvanced system of organizing, storing and protectingyour instrument set during transportation andsterilization.
• Instruments organized with the InstrumentOrganization System are guarded against damagefrom instrument on instrument impact duringtransportation
• Protected instruments reduce the cost of repairs& reduce set down time
• Protected instruments increase instrument life &reduce replacement cost
In the O.R. a set organized with Aesculap’s InstrumentOrganization System can also help cases flow moreefficiently by:
• Allowing staff to quickly identify and select thecorrect instruments
• Work directly from the organized set• Replace used instruments into the correct slotmaking final instrument count easier
During Sterilization, Aesculap’s Instrument OrganizationSystem allows:
• Better sterilant flow between instruments• Consistent sterilization results every time becauseyour instruments are in the same place
Transsphenoidalhypophysectomy set
3
Bone tray accessory
Tympanoplasty set
Microvasculartray accessory
4
Instrument Organization System
JF 120 R
JG 312
JG 330
This shows just a few examples of the many number ofways the Aesculap Instrument Organization System canbe configured.
For a list of products used in these trays, see back pageof this brochure
JF 346
Transsphenoidalhypophysectomy set
5
JG 308
JG 317
JF 110 R
JF 148 R
JG 358
JG 308
JF 148 R
JG 304
JG 365 R
JG 306JG 300
Tympanoplasty set
Microvasculartray accessory -
6
Silicone Type/Style/Instrument Racks (Mounting type = A)* Description Width x Height Item No.
Instrument Organization SystemProduct listing
*See page 10
JG 304
JG 305
JG 306
1
43⁄4” x 11⁄2”
61⁄4” x 11⁄2”
91⁄2” x 11⁄2”
JG 308
JG 309
JG 310
2
43⁄4” x 11⁄2”
61⁄4” x 11⁄2”
91⁄2” x 11⁄2”
JG 312
JG 313
JG 314
3
43⁄4” x 11⁄2”
61⁄4” x 11⁄2”
91⁄2” x 11⁄2”
JG 316
JG 317
JG 318
4
43⁄4” x 11⁄2”
61⁄4” x 11⁄2”
91⁄2” x 11⁄2”
JG 3211 47⁄8” x 3⁄4”
JG 3222 47⁄8” x 3⁄4”
JG 3233 47⁄8” x 3⁄4”
JG 324Support
for angled
instruments
47⁄8” x 13⁄4”
7
Large Silicone holders (Mounting Type B)* Diameter Item No.
Separating racks (Mounting Type A)* Width x Height Item No.
JG 358
JG 359
JG 360
43⁄4” x 11⁄2”
61⁄4” x 11⁄2”
91⁄2” x 11⁄2”
JG 330
JG 331
JG 332
1⁄2” (15mm)
1” (20mm)
11⁄8” (30mm)
Small Silicone holders (Mounting Type A)* Diameter Item No.
JG 340
JG 341
JG 342
JG 343
JG 344
1⁄8” (5mm)
1⁄4” (7.5mm)
5⁄16” (8.5mm)
3⁄8” (10mm)
1⁄2” (12mm)
Metal clamp with silicone inlay (Mounting Type A)* Diameter Item No.
JG 352 R
JG 353 R
JG 354 R
1⁄2” - 3⁄4” (15-20mm)
3⁄4” - 11⁄8” (20-30mm)
11⁄8” - 13⁄4” (30-45mm)
Fixation pins for ring handle instruments Diameter Item No.
*See page 10
1”, height 11⁄8” JF 346
1⁄4”, height 17⁄8” JF 343
Comes with nuts and screws for mounting
Mounting type A - built in - does not require additional fixation pins
For all “Type A” mounting items, fixation pins and screwdriver are required, see page 8.
8
Instrument Organization SystemProduct listing
Fixation elements Item No.
Optics holders (Mounting Type A)* Item No.
JG 367
JG 368
JG 369
Eyepiece holder
Sleeve holder
Support for angled optics
Tray insert (Mounting Type C)* Dimensions Item No.
JF 110 R
JF 210 R
10” x 73⁄4”
171⁄4” x 10”
Silicone rack for tray inserts (Mounting Type C)* Dimensions Item No.
JG 37091⁄2” x 11⁄8”
*See page 10
Use JG302 allen head
screw driver to mount
Fixation pin formounting type A
JG 300 10 pins/pack
Fixation clamp formounting type B(JG330 - JG332)
JG 301 R 10 pins/pack
Screwdriver with an allenhead for use withJG300, 3mm head
JG 302
To be used with trayinserts JF110F & JF210F
9
Silicone mesh mats Dimensions Item No.
JF 938
JF 939
91⁄2” x 97⁄8”
187⁄8” x 97⁄8”For use with 1/2 size containers
Mini tray with lid Dimensions Item No.
JF 148 R53⁄4” x 13⁄4” x 1”
Needle box holders Mounting Dimensions Item No.
JG 365 R
JG 366 R
23⁄8”
35⁄8”
Mounting to be pushedthrough the mesh frombelow until it engagesaudibly
Storage frame for bone punches Dimensions Item No.
JF 120 R91⁄2” x 87⁄8” x 63⁄8”
For use with 3/4 size containers
For use with JF 110 R
For use with JF 210 R
For use with JF 159 R
For use with full size containers
Mini tray can be mountedon a perforated basket withfixation pin type A (JG300)
JF 940
JF 941
157⁄8” x 97⁄8”
211⁄8” x 97⁄8”
JF 942
JF 943
JF 946
71⁄2” x 91⁄8”
17” x 91⁄8”
101⁄8” x 41⁄2”
Sits inside half, 3/4or full size basket
10
Mounting Type A For instrument racks with fixation pin
Instrument Organization SystemHow to assemble
12
Mounting type A allows for easy top downassembly of the majority of STERILCONTAINER™Storage System silicone dividers
1 Insert fixation pin JG 300 in the rack.Install rack with fixation pin in the tray.
2 Push the fixation pin down, then turn itby 45° using JG 302 - Allen screwdriver.
1 Press fixation clamp JG 301 R into tray frombelow.
2 Slide in silicone holder sideways.
Mounting Type B For silicone holders with fixation clamps
21
Mounting Type C For silicone racks in tray inserts
1 Pull the silicone rack through the longitudinalslots in the tray.
*Mounting type C can only be used with JF 110 R and JF 210 Rbaskets
1
For use withJG330, JG331and JG332 only
For use when inserting JG310into JF110R and JF210R
11
Set Name - Microvascular Tray
Part Number Description Quantity
JF 252 R 3/4 Size Perforated Basket 2” 1
JG 306 Silicone Instrument Rack Type 1 240mm 2
JG 304 Silicone Instrument Rack Type 1 120mm 2
JF 148 R Mini Tray with Lid 1
JG 365 R Needle Box Holder 1
JG 300 Fixation Pins (Pack of 10) 1
JG 302 Hex Head Screwdriver for Fixation Pins 1
Set Name - Tympanoplasty Set
Part Number Description Quantity
JG 300 Fixation Pins (Pack of 10) 1
JG 358 Separating Racks 1
JG 308 Silicone Instrument Racks 2
JF 148 R Mini Tray with Lid 1
JF 110 R Tray Insert 1
JG 317 Silicone Instrument Racks 2
JF 346 Fixation Pins for Ring Handle Instruments 6
JF 343 Fixation Pins for Ring Handle Instruments 6
JF 224 R Full Size Perforated Basket, 4 Inches 1
Set Name - Transsphenoidal Hypophysectomy Set
JG 330 Large Silicone Holders 2
JG 312 Silicone Instrument Racks 2
JF 346 Fixation Pins for Ring Handle Instruments 4
JF 120 R Storage Frame for Bone Punches 1
JG 300 Fixation Pins (Pack of 10) 1
JG 301 R Fixation Clamp 1
JF 224 R Full Size Perforated Basket, 4 Inches 1
Below is a list of Instrument Organization System parts used for the trays on page’s 4 and 5 of the brochure.
Aesculap, Inc.
3773 Corporate ParkwayCenter Valley, PA 18034Phone: 800-282-9000
http://www.aesculapusa.com©2007 AESCULAP. ALL RIGHTS RESERVED. PRINTED IN THE USA. DOC672 5M 1/07Aesculap is an equal opportunity employer
All rights reserved. Technical alterations are possible. This leaflet may beused for no other purposes than offering, buying and selling of our products.No part may be copied or reproduced in any form. In the case of misuse weretain the rights to recall our catalogues and pricelists and to take legal actions.