Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and...
Transcript of Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and...
![Page 1: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/1.jpg)
Adventures in Engineering:Lasers and Mechatronics
Robert Morris UniversityThe Penn State Electro-Optics Center
Nov 17th, 2018Westinghouse Science Honors Institute
Presented by:Benjamin Campbell, Ph.D.
![Page 2: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/2.jpg)
Lasers and Mechatronics
Educational BackgroundPine‐Richland High School 1994 ‐ 1998Penn State 1998 ‐ 2003
B.S. Physics, Electronics Option Minor: MathematicsMinor: BusinessMinor: Astronomy and Astrophysics
M.S. Electrical Engineering
Robert Morris University 2005 ‐ 2008Engineering Ph.D.
Penn State Electro Optics Center 2003 ‐ 2011Research Engineer
Robert Morris University 2011‐ presentAssociate Professor of Engineering
Work History
![Page 3: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/3.jpg)
Lasers and Mechatronics
What is a Laser?
![Page 4: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/4.jpg)
Lasers and MechatronicsHow Do Lasers Work?
Light Amplification by Stimulated Emission of Radiation
•Assume that all the atoms start out from the ground state.
•Then most of them are pumped up to a higher energy level E3.
•They quickly fall from the short-lived level E3 to the metastable upper level E2, which has a much longer lifetime (typically thousands of times longer).
•The result is the population inversion between energy level E2 and depopulated level E1, which are the laser transition levels. A model of a three-level laser
![Page 5: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/5.jpg)
Lasers and Mechatronics
How Do Lasers Work?Pumping for a Population Inversion
Pumping is the process of delivering energy to the lasing material to create a population inversion. The most common forms of energy delivery are:
•Electricity
•Light
![Page 6: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/6.jpg)
Lasers and Mechatronics
Laser Light is:• Coherent. Different parts of the laser beam are related to each other
in phase. These phase relationships are maintained over long enough time so that interference effects may be seen or recorded photographically. This coherence property is what makes holograms possible.
1. Spatial Coherence 2. Temporal Coherence
• Monochromatic. Laser light consists of essentially one wavelength, having its origin in stimulated emission from one set of atomic energy levels.
• Typically Highly Collimated. Because of bouncing back between mirrored ends of a laser cavity, those paths which sustain amplification must pass between the mirrors many times and be very nearly perpendicular to the mirrors. As a result, laser beams are very narrow and do not spread very much.
![Page 7: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/7.jpg)
Lasers and Mechatronics
The typical output power is less than 1 mW
The Inner Workings of a Laser Pointer
![Page 8: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/8.jpg)
Lasers and Mechatronics
What happens if we add up a bunch of laser
pointers and give them a really big battery?
![Page 9: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/9.jpg)
Lasers and Mechatronics
Laser Defense: Land, Sea, Air,
![Page 10: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/10.jpg)
Lasers and Mechatronics
CNN: Navy's drone death ray takes out targets.
Gizmodo: The Navy Wants to Kill Drones With This Ginormous Laser Gun.
![Page 11: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/11.jpg)
Lasers and Mechatronics
LAWS: LAser Weapons System
![Page 12: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/12.jpg)
Lasers and Mechatronics
LAWS Demonstration
![Page 13: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/13.jpg)
Lasers and Mechatronics
Material is ablated by squeezing energy into an ultrashort time span to superheat and liberate the surface material before heat
transfer negatively affects the surrounding material
Ultrashort Pulse Drilling
![Page 14: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/14.jpg)
Lasers and Mechatronics
How Short is Ultrashort?
Prefix Valuemilli- 10-3
micro- 10-6
nano- 10-9
pico- 10-12
femto- 10-15
atto- 10-18
One attosecond (one billionth of a billionth of
a second) is the approximate time that it takes light to travel the
diameter of an atom
In 200 femtoseconds, light can barely travel
the thickness of a strand of hair (60 micrometers)
![Page 15: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/15.jpg)
Lasers and Mechatronics
Power = (Energy)/(Time Duration)1 Watt = (1 Joule)/( 1 Second)
A laser pointer is a Continuous Wave (CW) laser. If it has an output of 1milliWatt
for 1 second, the energy is 1milliJoule. For example, we will use 0.242 milliJoules
If we compress that energy into a pulse that is 200 femtoseconds we get a laser pointer with a power of...
![Page 16: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/16.jpg)
Lasers and Mechatronics
1.21 GigaWatts!
![Page 17: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/17.jpg)
Lasers and Mechatronics
A Manufacturing Technology
![Page 18: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/18.jpg)
Lasers and Mechatronics
Comparison of picosecond laser cut to mechanical methods (metal
shears) for thin metalLaser cut copper
Mechanically cut copper
![Page 19: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/19.jpg)
Lasers and Mechatronics
Laser Machining Examples
Ceramic Matrix Composite
CVD Diamond
![Page 20: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/20.jpg)
Lasers and Mechatronics
Laser cut micro‐channels in silicon carbide using ps and fs lasers
![Page 21: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/21.jpg)
Lasers and Mechatronics
Marking Plastics3 micron marks with femtosecond laser (below) and 25 micron spot size patterning with picosecond laser (right) in various plastics
![Page 22: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/22.jpg)
Lasers and Mechatronics
Ultra-Short Pulse Laser Machining
BenefitsPrecise machining with negligible heat affectsHigher reliability and improved performanceLower pollution
Improved Fuel Injection
5-ton diesel truck
Femtosecond laser-drilled holes.
Improved Performance and Lower Pollution
![Page 23: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/23.jpg)
Lasers and Mechatronics
Spinning Wedge Trepanning System
• This system uses two pairs of wedges to give the beam offset from the center axis and add an attack angle through the processing lens
• Acts as a corkscrew pattern for drilling
• By changing wedge parameter the taper of the hole can be adjusted, to get positive, negative, or no taper.
![Page 24: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/24.jpg)
Lasers and Mechatronics
Shapes made by Spinning WedgesRepresentative Image Shape
Circle
Line
7 - armed asterisk
9 - point star
Picture courtesy of LaserMech Inc.
![Page 25: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/25.jpg)
Lasers and Mechatronics
Spinning Wedge Model
Using geometric optic principles to
calculate beam deflections at each interface
![Page 26: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/26.jpg)
Lasers and Mechatronics
3D Modifications• Snell’s Law can be altered to give outputs in vector
form as seen below. We incorporate a rotational matrix around the z-axis with respect to gamma, a rotational parameter, and find the angle between planar norms. We use an initial input directionality to convert the vector back to output angles
or
![Page 27: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/27.jpg)
Lasers and Mechatronics
Output Examples
![Page 28: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/28.jpg)
Lasers and Mechatronics
Photos show 282 m deflection effected with a single pulse 7J (~190J/cm^2) laser pulse
7J laser pulse
Keyence proximity sensor
A before (left) and after (right) image of laser bending of uncoated Neyoro®G sample
![Page 29: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/29.jpg)
Lasers and Mechatronics
Fun with Lasers…
Laser Bending Video And some laser music!
(Courtesy of Ben Hall at PSU’s ARL)
![Page 30: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/30.jpg)
Lasers and Mechatronics
Laser Writing Inside Materials• Unfocused lasers can be
transmitted through transparent materials
• If the laser is focused, it will only interact with the material over a fluencethreshold (high energy density)
• The material will be damaged at the focus with the highest fluence.
• Moving the focus within the material will shape the damage zone.
![Page 31: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/31.jpg)
Lasers and Mechatronics
Challenge:Cut wires that are embedded in glass
Short circuits were found in a thick window of glass that had an electrical network of tungsten wire less than 25 microns thick embedded into it at depths between 10 and 50 mm. Can a laser be used to effectively sever the wire?
Applications: Repairing wiring in windows and embedded displays
![Page 32: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/32.jpg)
Lasers and Mechatronics
Cutting of embedded wires in transparent armor
To reduce the amount of heat transfer into the glass, a femtosecond and picosecond laser were used for testing.
The femtosecond pulses tended to discolor the glass that it passed through
The picosecond laser did not cause these distortions.
![Page 33: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/33.jpg)
Lasers and Mechatronics
Picosecond laser cutting of embedded wires in transparent armor
532nm at 100kHz
1064 nm at 10kHz
![Page 34: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/34.jpg)
Lasers and Mechatronics
How Small is Micromachining?
![Page 35: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/35.jpg)
Lasers and Mechatronics
The Gettysburg Address contains 267 words (1189 characters) and is compressed into an area measuring less than 4mm (3/16 inch) by 6mm (1/4 inch). The height of each letter is 1/10 of a millimeter tall (four-thousandths of an inch),
The Gettysburg Address etched on a Lincoln PennyHow Small Can We Laser Etch?
![Page 36: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/36.jpg)
Lasers and Mechatronics
Laser micromachining the Declaration of Independence
on a Jefferson nickel
The Declaration of Independence contains:
6,716 Characters1,327 Words
The program to etch the nickel was:
4,427 pages in size 10 font 252,298 lines of code.
Still enough room left to add the signatures of the founding fathers below the text.
![Page 37: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/37.jpg)
Lasers and Mechatronics
Exploring Engineering at Robert Morris
University in Moon, PA
• Only Manufacturing Engineering Major offered in PA• Engineering degrees with concentrations in Mechanical,
Biomedical, Software and Industrial Engineering, Masters in Engineering Management
• Private School with small class sizes (typically 20 or less)• ABET Accredited Engineering Degree• Launched a Mechatronics Minor in 2014
![Page 38: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/38.jpg)
Lasers and Mechatronics
Mechatronics
• Mechatronics is a new term that covers three areas of engineering:– Mechanical Engineering– Software Engineering– Electrical Engineering
• Multidisciplinary approach to robotics andautomation
![Page 39: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/39.jpg)
Lasers and Mechatronics
Neural Interface
![Page 40: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/40.jpg)
Lasers and Mechatronics
Neural Interface
![Page 41: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/41.jpg)
Lasers and Mechatronics
• Exploring mental control of more advanced devices
• Using Arduino controller to read signals from EEG headsets and trigger other devices
• Exploring control of Lego Mindstorm based robots via Bluetooth
Neural Interface
![Page 42: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/42.jpg)
Lasers and Mechatronics
Artificial Finger Project
What is the Problem? ‐ Prosthetic hands cannot operate touch screens‐ Most gloves inhibit touch screen use‐ Many different types of touchscreens are made
Engineering Investigation‐ What types of touchscreens can we identify‐ Test common materials on each‐ Design new materials to be universal activator
![Page 43: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/43.jpg)
Lasers and Mechatronics
Artificial Finger ProjectBuilding prototypes to effect capacitance fields through insulating material.Student designed app for testing accuracy of touching targets. Comparing:• Normal fingers• Finger with Band‐aid• Glove with conductive fingertip• Stylus• Prototype prostheses
![Page 44: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/44.jpg)
Lasers and Mechatronics
Transmission Plastic Welding with Lasers
Incident Laser Beam
Transmissive Layer
Absorbing Layer
Weld Seam
Clamping Tool
![Page 45: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/45.jpg)
Lasers and Mechatronics
Transmission Welding SamplesBad Weld Good Weld
A clear polycarbonate on top of an opaque gray polycarbonate
![Page 46: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/46.jpg)
Lasers and Mechatronics
Transmission Welding Samples
Bad Weld Good Weld
![Page 47: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/47.jpg)
Lasers and Mechatronics
Transmission Welding Samples
![Page 48: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/48.jpg)
Lasers and Mechatronics
Direct Laser Welding: Infrared Welding of Similar MaterialsWeld Process
1. Load2. Melt3. Seal4. Unload 2 2
3
The area to be joined must be brought up to melting temperature and ideally kept beneath decomposition temperature. The surface will usually stay molten for a few seconds, but the pressing together of the parts can usually be performed in less than a second.
![Page 49: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/49.jpg)
Lasers and Mechatronics
MECCO 50W Plastic Welding System
![Page 50: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/50.jpg)
Lasers and Mechatronics
Laser Ablation TomographyCourtesy of Lasers for Innovative Solutions
• A laser can completely burn a sample layer by layer• A camera collects images during the burning process• A spectrometer can capture the wavelengths emitted as the matter
is excited by the laser, and identify the constituent elements
![Page 51: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/51.jpg)
Lasers and Mechatronics
*Warning, this transporter destroys subject and produces cheap plastic copies anywhere in the world.
Enter at your own risk.
Creating a Matter Transporter*Courtesy of Lasers for Innovative Solutions
![Page 52: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/52.jpg)
Lasers and Mechatronics
Creating a Matter Transporter*Courtesy of Lasers for Innovative Solutions
![Page 53: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/53.jpg)
Lasers and Mechatronics
Laser Ablation 3D Printing Transporter
![Page 54: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/54.jpg)
Lasers and Mechatronics
RMU Research• RMU Engineering Learning Factory
http://www.youtube.com/watch?v=k92vlAvnFz0
![Page 55: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/55.jpg)
Lasers and Mechatronics
PGSS at Carnegie MellonThe Pennsylvania Governor’s School for the Sciences
http://sciences.pa‐gov‐schools.org/• 5 week intensive residential summer program• Study advanced topics in Biology, Chemistry, Computer Science, Mathematics and Physics
• Choose from electives and a lab in those subjects• Complete an original research project in a team• FREE program for rising seniors, applications due Jan 31st
![Page 56: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/56.jpg)
Lasers and Mechatronics
So what is PGSS like?
![Page 57: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/57.jpg)
Lasers and Mechatronics
College is a time to figure out your Ikigai (pronounced ee-key-guy). In my career the work that has been most satisfying too me has been at the center of this.
Most continue through school to gain skills for a vocation or a profession.
I challenge you to move beyond those circles and discover your passion and your mission in life to reach your Ikigai.
![Page 58: Adventures in Engineering - Westinghouse Nuclear...Adventures in Engineering: Lasers and Mechatronics Robert Morris University The Penn State Electro-Optics Center Nov 17th, 2018 Westinghouse](https://reader034.fdocuments.in/reader034/viewer/2022050315/5f7741aec0bc657ef3287c0a/html5/thumbnails/58.jpg)
Lasers and Mechatronics
Questions? Email:
Website: https://sites.google.com/a/rmu.edu/campbellb/