Advanced Control Systems - MCB-4B 4-Motor Driver
1
Multi-Axis Stepping Motor Driver/Controller MCB-4B Specifications Electrical Drive Current - 0.250 - 3.00 Amps/Phase (based upon motor type) Logic Power Supply - 5VDC Input+/-5%@120mA Typical Motor Power Supply - 12 to 40VDC @ up to 4Amps Idle Current - 0 to 3.00Amps/phase - Adjustable Motor Requirements 2-Phase Bi-Polar Stepping Motors, or 4-Phase Motors Connected as 2-Phase 4, 6 or 8 Leads 0.250 - 3.00Amp Winding Current Motor Operating Mode Low Noise Bi-polar Chopper Drive Full Step Full/Half Step with Torque Compensation Quarter/Eighth Step with Torque Compensation Environmental Requirements Operating Temperature 0C to 50C (32F to 140F) Storage Temperature -20C to 70C (-4F to 160F) Humidity <95% Non-Condensing Dimensions 13.00L x 6.00W x 1.0”D (330 x 153 x 25.4mm) Mass 28oz. (0.793kg) MCB-4B Features Drives and Controls Up to 4 (Four) 2-Phase Stepping Motors with Stepping Rates to 50,000 Steps/Sec. Adjustable Motor Winding Current 0.250 - 3.00 Amps/Phase High Efficiency, Low Noise, Motor Driver Designed for Laboratory Applications Nonvolatile Memory For Control Variables & Comprehensive Motion Instruction Set Certified Scientific Software spec Driver Support 4 Toggle Switches for Manual Jog Control RS-232 and RS-485 Serial Communica- tions up to 57.6k Baud Optional Single Board Enclosure with I/O Controller Board Optional 19” Rack Enclosure for 8 Boards or 32 Axis of Drive and Control 35 Corporate Park Drive Pembroke, Massachusetts 02359 USA The MCB-4B Stepping Motor Intelligent Motion Driver/ Controller is an open frame 4- axis integrated stepping motor driver/controller that drives and controls any 2-phase stepping motor with phase currents from 0.25 to 3.0Amps/ phase, simultaneously. The MCB-4B performs indexing functions without the need of a host computer, or can operate under the control of a host. The MCB-4B’s internal nonvolatile memory will store and execute a programmed instruction set, with four on-board toggle switches providing manual jog control. High efficiency , low noise motor drivers provide ideal programmable control for multi-axis positioners, beamline shutters and other laboratory control applications. Place Artwork Here www.ACSMotion.com Model: MCB-4B TEL: 781-829-9228 FAX: 781-829-9875
-
Upload
sunthron-somchai -
Category
Documents
-
view
5 -
download
0
description
manual
Transcript of Advanced Control Systems - MCB-4B 4-Motor Driver
Multi-Axis Stepping Motor Driver/Controller
123456789012345123456789012345123456789012345123456789012345
1234567890123456789012345678123456789012345678901234567812345678901234567890123456781234567890123456789012345678
123456789123456789123456789123456789
123456789012345678901234567123456789012345678901234567123456789012345678901234567123456789012345678901234567123456789012345678901234567
MCB-4B Specifications12345678901234123456789012341234567890123412345678901234
ElectricalDrive Current - 0.250 - 3.00 Amps/Phase(based upon motor type)Logic Power Supply - 5VDC Input+/-5%@120mATypicalMotor Power Supply - 12 to 40VDC @ up to4AmpsIdle Current - 0 to 3.00Amps/phase - Adjustable
Motor Requirements2-Phase Bi-Polar Stepping Motors, or4-Phase Motors Connected as 2-Phase4, 6 or 8 Leads0.250 - 3.00Amp Winding Current
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012312345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901231234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123
Motor Operating ModeLow Noise Bi-polar Chopper DriveFull StepFull/Half Step with Torque CompensationQuarter/Eighth Step with Torque Compensation
Environmental RequirementsOperating Temperature 0C to 50C (32F to 140F)Storage Temperature -20C to 70C (-4F to 160F)Humidity <95% Non-Condensing
Dimensions13.00L x 6.00W x 1.0”D (330 x 153 x 25.4mm)
Mass28oz. (0.793kg)
MCB-4B Features
Drives and Controls Up to 4 (Four)2-Phase Stepping Motors with SteppingRates to 50,000 Steps/Sec.
Adjustable Motor Winding Current0.250 - 3.00 Amps/Phase
High Efficiency, Low Noise, Motor DriverDesigned for Laboratory Applications
Nonvolatile Memory For Control Variables& Comprehensive Motion Instruction Set
Certified Scientific Softwarespec Driver Support
4 Toggle Switches for Manual Jog Control
RS-232 and RS-485 Serial Communica-tions up to 57.6k Baud
Optional Single Board Enclosure with I/OController Board
Optional 19” Rack Enclosure for 8 Boardsor 32 Axis of Drive and Control
35 Corporate Park DrivePembroke, Massachusetts 02359 USA
The MCB-4B Stepping Motor Intelligent Motion Driver/Controller is an open frame 4- axis integrated steppingmotor driver/controller that drives and controls any 2-phasestepping motor with phase currents from 0.25 to 3.0Amps/phase, simultaneously. The MCB-4B performs indexingfunctions without the need of a host computer, or can operateunder the control of a host. The MCB-4B’s internal nonvolatilememory will store and execute a programmed instruction set,with four on-board toggle switches providing manual jogcontrol. High efficiency , low noise motor drivers provide idealprogrammable control for multi-axis positioners, beamlineshutters and other laboratory control applications.
PlaceArtwork
Here
123456789123456789123456789123456789
123456789123456789123456789123456789
123456789123456789123456789123456789
123456789123456789123456789123456789
123456789123456789123456789123456789
123456789123456789123456789123456789123456789
123456789123456789123456789123456789
123456789123456789123456789123456789
www.ACSMotion.com
Model: MCB-4B
TEL: 781-829-9228 FAX: 781-829-9875
