ADL DOWNLIGHTS - Mondoluce · The ADL CFL & MH downlights are designed specifically for use with...
Embed Size (px)
Transcript of ADL DOWNLIGHTS - Mondoluce · The ADL CFL & MH downlights are designed specifically for use with...
-
Efficient Lighting Systems
AUSTRALIAN MADE COMPACT FLUORESCENT & METAL HALIDE DOWNLIGHTS
ADL DOWNLIGHTS
-
2
CONTENTS
Efficient Lighting Systems – An Australian owned company supplying Australian designed, made/assembled products.
INTRODUCTION P4ADL100 P5ADL100 SHALLOW P5ADLH125 P6ADL125 HID P7ADL220 CFL P8ADL220 HID P9ADLS100 P10 ADLS130 CFL P11ADLS130 HID P11
-
3
Efficient Lighting Systems Pty. Ltd.
Good design – Australian designed for Australian conditions is where it all starts, and where extensive experience is a must. We know what works, and just as importantly, we know what will not work.
Quality components – only top quality components are used. World recognised quality component suppliers are chosen for their quality, not price. With so many unknown new comers in lighting you will find comfort in the fact that the manufacturers of all our components are well recognised for top quality.
Independent photometric test reports – There is no need to print brochures with green trees to suggest energy efficiency. All our products are supported by independent photometric test reports. Files are available from the web site and full copies of test reports are available if required.
EMC compliance – All products are tested for compliance to AS/NZS CISPR15
Australian assembly and testing – The ultimate final assurance of quality as all fittings are assembled, electrically tested, and packaged in our Melbourne based facility. You’re welcome to visit anytime to view this process.
WITH OVER 20 YEARS OF EXPERIENCE IN MANUFACTURING LIGHT FITTINGS, ELS KNOWS WHAT IS REQUIRED TO MAKE QUALITY PRODUCTS
-
4
SERIES ADL DOWNLIGHTS
Energy Efficient Compact Fluorescent & Metal Halide DownlightsThe ADL CFL & MH downlights are designed specifically for use with energy efficient lamps. For many years 50w low voltage halogen downlights have been used for general lighting and display lighting. However, the halogen lamp is not the most energy efficient option. While LED's are growing in popularity for these types of installations they are often still an expensive option, while compact fluorescent and metal halide lamps offer energy savings that will result in less green house gas emissions while providing a lower cost alternative to many LED options. The Australian Building Code section J6 has also now specified maximum lamp power density in watts/ square metre, and minimum light source efficiency in lumens/watt.The following chart demonstrates the efficiency of lamps in lumens per watt. This clearly shows that fluorescent and metal halide lamps produce 3 to 4 times the amount of light for each watt of power compared to a low voltage halogen lamp.
Maintenance is also greatly reduced with the use of both fluorescent and metal halide lamps with an average life of 10,000 hours. The fluorescent and metal halide lamps do require purpose made light fittings to optimise the lamps' superior performance. ELS are pleased to offer the following solutions.
Fluorescent lampsBest for general lighting of spaces in both residential and commercial installationsFeatures• Instanton—hotrestrike• Dimmingoptionsavailable• Lampcolourchoice–2700k,3000k,4000k• Lampreplacementdoesnotrequirecontrolgearreplacement.Theelectroniccontrolgearhasalifeof50,000hours
Metal halideBest for display, accent lighting, retail use — areas that require some sparkle. Generally not recommended for interior residential use.Features• Requireawarmupperiod• Willnotrestrikehot–mayneeda10minutecoolofperiodbeforerestrike• Availablein3000kcolour–similartohalogenlamps• Lampreplacementdoesnotrequirecontrolgearreplacement.Theelectroniccontrolgearhasalifeof50,000hours
AUSTRALIAN MADE COMPACT FLUORESCENT & METAL HALIDE DOWNLIGHTS
20 lumens/watt50w MR16 1000 lumens
18w TC-T 1200 lumens
20w MH 1700 lumens
66 lumens/watt
82 lumens/watt
-
Description Part Number
1X20w MH CDM-Tm PGj5 narrow beam ADL100/20N
1X20w MH CDM-Tm PGj5 medium beam ADL100/20M
1X20w MH CDM-Tm PGj5 wide beam ADL100/20W
Description Part Number
1X20w MH CDM-Tm PGj5 narrow beam ADL100SH/20N
1X20w MH CDM-Tm PGj5 medium beam ADL100SH/20M
ADL100• 20wMHminiaturelamps• 3reflectorbeams—narrow,medium,wide• Anodisedaluminiumreflector• Electroniccontrolgear• Ceilingmountingwithouttools• White/silvertrimavailable• Australianmade• Suitableforcommercialorretailapplications
ADL100 SHALLOW• 20wMHminiaturelamps• 2reflectorbeams—narrowandmedium• Frostedanodisedaluminiumreflector• Electroniccontrolgear• Ceilingmountingwithouttools• White/silvertrimavailable• Australianmade• Suitableforcommercialorretailapplications
5
CEILING OPENING95
102
100
CEILING OPENING95
102
70
8000
16000
24000
400
800
1200
ADL100SH/20N ADL100SH/20M
5000
10000
15000
600
1200
1800
250
500
750
ADL100/20N ADL100/20M ADL100/20W
-
Dimming Type Part Number TC-T 18w
High frequency ballast (NON DIM) ADLH125.51.18.63
Analogue dimmable HF ballast (1-10v) ADLH125.51.18.64
Digital dimmable HF ballast (DSI) ADLH125.51.18.65
Digital dimmable HF ballast (DALI) ADLH125.51.18.66
Dimming Type Part Number TC-T 18w Clear Lens
Part Number TC-T 18w Frosted Lens
High frequency ballast (NON DIM) ADLH125.51.18.63.901 ADLH125.51.18.63.900
Analogue dimmable HF ballast (1-10v) ADLH125.51.18.64.901 ADLH125.51.18.64.900
Digital dimmable HF ballast (DSI) ADLH125.51.18.65.901 ADLH125.51.18.65.900
Digital dimmable HF ballast (DALI) ADLH125.51.18.66.901 ADLH125.51.18.66.900
ADLH125• Compactfluorescentlamps—18w• 2.5mmwhitepolycarbonatetrim• Frostedclipinpolycarbonatelens• Anodisedaluminiumreflector• Ceilingmountingwithouttools• Suitableforcommercialordomesticapplications
ADLH125 IP• Compactfluorescentlamps—18w• IPX4frombelowtheceiling• Removabletwistlockdiecastaluminiumtrim• Clear/frostedglassinlay• Anodisedaluminiumreflector• Ceilingmountingwithouttools• Suitableforcommercialordomesticapplications
6
CEILING OPENING
125
110
116
2.5
CEILING OPENING
125
110
116
6.5
100
200
300
100
200
300
ADLH125.51.18.63.900 ADLH125.51.18.63.901
-
Description Part Number
1X20w MH CDM-Tm PGj5 ADL125/20
1X35w MH HIT/CDM-T G12 ADL125/35
ADL125 MH• 20wminiatureMHor35wMHlamps• Anodisedaluminiumreflector• Electroniccontrolgear• Ceilingmountingwithouttools• White/silvertrimavailable• Australianmade• Suitableforcommercialorretailapplications
7
CEILING OPENING
125
130
116
ADL125/20
CEILING OPENING
125
130
116
ADL125/35
400
800
1200
300
600
900
ADL125/20 ADL125/35
-
Dimming Type Part Number TC-T 1x14w
Part Number TC-T 2x14w
Part Number TC-T 1x17w
Part Number TC-T 2x17w
High frequency ballast (NON DIM) ADL220.51.14.63 ADL220.52.14.63 ADL220.51.17.63 ADL220.52.17.63
Analogue dimmable HF ballast (1-10v) ADL220.51.14.64 ADL220.52.14.64 ADL220.51.17.64 ADL220.52.17.64
Digital dimmable HF ballast (DSI) ADL220.51.14.65 ADL220.52.14.65 ADL220.51.17.65 ADL220.52.17.65
Digital dimmable HF ballast (DALI) ADL220.51.14.66 ADL220.52.14.66 ADL220.51.17.66 ADL220.52.17.66
Dimming Type Part Number TC-D 1x18w
Part Number TC-D 2x18w
Part Number TC-D 1x26w
Part Number TC-D 2x26w
High frequency ballast (NON DIM) ADL220.51.18.53 ADL220.52.18.53 ADL220.51.26.53 ADL220.52.26.53
Analogue dimmable HF ballast (1-10v) ADL220.51.18.54 ADL220.52.18.54 ADL220.51.26.54 ADL220.52.26.54
Digital dimmable HF ballast (DSI) ADL220.51.18.55 ADL220.52.18.55 ADL220.51.26.55 ADL220.52.26.55
Digital dimmable HF ballast (DALI) ADL220.51.18.56 ADL220.52.18.56 ADL220.51.26.56 ADL220.52.26.56
ADL220• Compactfluorescentlamps14,17,18or26w• Aluminiumreflector• Steelbodyandmountingring• Whitepolycarbonatetrim• Electroniccontrolgear• Ceilingmountingwithouttools• Australianmade
8
CEILING OPENING
220
155
206
OPTIONAL ACCESSORIES
220.G2 - Frosted inner, clear outer glass
220.G3 - Frosted outer circle (hole in centre) glass
100
200
300
80
160
240
150
300
450
200
400
600
ADL220.52.14.63 ADL220.51.17.63 ADL220.52.18.53 ADL220.51.26.53
-
OPTIONAL ACCESSORIES
220.G2 - Frosted inner, clear outer glass
220.G3 - Frosted outer circle (hole in centre) glass
Dimming Type Part Number 1x70w E27
Part Number 1x100w E27
Part Number 1x150w E27
Magnetic ballast ADL220/70 ADL220/100 ADL220/150
High frequency ballast (NON DIM) ADL220/70E ADL220/100E ADL220/150E
ADL220 HID• Metalhalidelamps70,100or150w• Whitepolycarbonatetrim• Aluminiumfacetedlowglarereflector• Steelbodyandmountingring• Electroniccontrolgearavailable• Ceilingmountingwithouttools• Australianmade
9
CEILING OPENING
220
240
206
120
240
360
ADL220/70
Utilization factors UF(F) SHR NOM = 1.25
Room Reflectances Room Index
C W F 0.75 1.00 1.25 1.50 2.00 2.50 3.00 4.00 5.00
0.70 0.50 0.200.30
0.10
0.44 0.49 0.52 0.54 0.57 0.58 0.60 0.61 0.620.41 0.46 0.49 0.52 0.55 0.57 0.58 0.60 0.61 0.39 0.44 0.47 0.50 0.53 0.55 0.56 0.58 0.60
0.50 0.50 0.200.300.10
0.44 0.48 0.51 0.53 0.55 0.57 0.58 0.59 0.600.41 0.46 0.49 0.51 0.53 0.55 0.56 0.58 0.590.39 0.44 0.47 0.49 0.52 0.54 0.55 0.57 0.58
0.30 0.50 0.200.300.10
0.43 0.47 0.50 0.51 0.54 0.55 0.56 0.57 0.580.41 0.45 0.48 0.50 0.52 0.54 0.55 0.56 0.570.39 0.43 0.46 0.48 0.51 0.53 0.54 0.55 0.56
0.00 0.00 0.00 0.38 0.42 0.45 0.47 0.49 0.51 0.52 0.53 0.54
-
ADLS100 MH• 20wMHminiaturelamps• 3reflectorbeams—narrow,medium,wide• Anodisedaluminiumreflector• Electroniccontrolgear• Ceilingmountingwithouttools• White/silvertrimavailable• Australianmade• Suitableforcommercialorretailapplications
10
Description Part Number
1X20w MH CDM-Tm PGj5 narrow beam ADLS100/20N
1X20w MH CDM-Tm PGj5 medium beam ADLS100/20M
1X20w MH CDM-Tm PGj5 wide beam ADLS100/20W
5000
10000
15000
600
1200
1800
250
500
750
ADLS100/20N ADLS100/20M ADLS100/20W
CEILING OPENING
110
110
95
-
ADLS130 CFL• Compactfluorescentlamp18wT• Anodisedaluminiumreflector• Electroniccontrolgear• Ceilingmountingwithouttools• White/silvertrimavailable• Australianmade• Suitableforcommercialordomesticapplications
ADLS130 MH• 35wMHlampG12• Anodisedaluminiumreflector• Electroniccontrolgear• Ceilingmountingwithouttools• White/silvertrimavailable• Australianmade• Suitableforcommercialorretailapplications
11
Dimming Type Part Number
High frequency ballast (NON DIM) ADLS130/18E
Analogue dimmable HF ballast (1-10v) ADLS130/18ED
Digital dimmable HF ballast (DSI) ADLS130/18EDD
Digital dimmable HF ballast (DALI) ADLS130/18DALI
100
200
300
ADLS130/18E
250
500
750
ADLS130/35
Description Part Number
1X35w MH HIT/CDM-T G12 ADL125/35
CEILING OPENING
130
120
110
CEILING OPENING
130
100
110
-
EFFICIENT LIGHTING SYSTEMS39 TINNING ST BRUNSWICK VIC 3056PO BOX 5084 MORELAND WEST VIC 3055
PHONE: 03 9222 5522FAX: 03 9222 5521
EMAIL: [email protected] catalogue is printed on 100% recycled paper
E f f icient L ight ing Systems has dis tr ibutors in each capi tal ci t y in Australia and New Zealand. To f ind your local dis tr ibutor v isi t www.elslighting.com.au