How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 1 of 33

How to Find ADIC Firmware and Software Versions

Hardware Products (Firmware Versions) ................................................................ 2 FastStor 2: LTO-3, LTO-2 HH and SDLT600 (Library and Drive) ............ 2 FastStor 2: LTO-1, LTO-2 and SDLT320 (Library and Drive) ................... 5 FastStor 7 (Library and Drive)...................................................................... 7 FastStor 22 (Library and Drive)................................................................... 7 Scalar 24 (Library, Drives, RMU, SNC and AMC) ..................................... 8 Scalar 100 (Library, Drives, RMU, SNC and AMC) ................................. 12 Scalar 218 (Library):................................................................................... 15 Scalar 220 (Library):................................................................................... 16 Scalar 224/234/424/434/448/458 (Library): ............................................... 16 Scalar 440/480 (Library):............................................................................ 17 Scalar 1000 (Library, Drives, RMU, SNC and AMC) ............................... 18 Scalar i2000 (Library, Drvies and SNC) .................................................... 21 Scalar 10K (Library, Drives, RMU, SNC and AMC) ................................ 23 AML 2/E/J (Library and Drives) ................................................................ 28 Pathlight VX (Library and SNC) ................................................................ 29

Software Products (Software Versions)................................................................. 32 StorNext Management Suite ....................................................................... 32 StorNext File System .................................................................................. 32 AMASS....................................................................................................... 32 Data Manager.............................................................................................. 33 FileServ ....................................................................................................... 33 VolServ ....................................................................................................... 33 Scalar DLC.................................................................................................. 33

Use the BookMarks to navigate quickly to your desired product

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 2 of 33

Hardware Products (Firmware Versions)

FastStor 2: LTO-3, LTO-2 HH and SDLT600 (Library and Drive) Remote Identification (Library Firmware): Login to the RMU. The library firmware level (Controller Firmware Revision) is the forth item in the Autoloader information. From other screens in the RMU, you can get back to the library firmware level by selecting Information and Autoloader

Remote Identification (Drive Firmware): Login to the RMU and select drive. The drive firmware level (Firmware Revision) is the fifth item in the Drive information. From other screens in the RMU, you can get back to the drive firmware level by selecting Information and Drive

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 3 of 33

Physical Location: The shipping label contains the library and drive firmware levels at the time of shipment. If your product is not new, please go to the operator panel.

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 4 of 33

Using the Operator Panel: Follow the instruction below to find your library (product) and drive firmware levels.

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 5 of 33

FastStor 2: LTO-1, LTO-2 and SDLT320 (Library and Drive) Remote Identification: No remote identification options Physical Location: The shipping label contains the library and drive firmware levels at the time of shipment. If your product is not new, please go to the operator panel.

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 6 of 33

Using the Operator Panel: The Autoloader SCSI Controller and Autoloader Robotics Controller are the same firmware level. This is your product firmware.

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 7 of 33

FastStor 7 (Library and Drive) Remote Identification: No remote identification options Physical Location: The shipping label contains the library and drive firmware levels at the time of shipment. If your product is not new, please go to the operator panel.

Using the Operator Panel: Not available from the display

FastStor 22 (Library and Drive) Remote Identification: No remote identification options Physical Location: Back of the chassis. Example: (S/N 920000123) Using the Operator Panel: Not available from the display

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 8 of 33

Scalar 24 (Library, Drives, RMU, SNC and AMC) Remote Identification (Library, Drives, RMU, SNC and AMC)

Library and RMU FW: Go to the RMU Status tab. (Library FW and RMU FW circled below)

Drive FW: Go to the RMU Firmware tab. If not logged in, enter your login name and password (the default login is “admin” and the default password is “secure”) and select submit. The current drive FW version is displayed in the circles below (25D4).

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 9 of 33

SNC 4000 Version: Open the AMC client. If not logged in, enter your login name and password (the default login is “admin” and the default password is “password”) and select submit. The SNC firmware version is circled below.

AMC for the SC24: Open the AMC client. If not logged in, enter your login name and password (the default login is “admin” and the default password is “password”) and select submit.

1. Select Help and About

The AMC software versions are circled above

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 10 of 33

Physical Location (Library and Drives): The shipping label contains the library and drive firmware levels at the time of shipment

. Using the Operator Panel (Library, Drives and RMU):

1. Push the arrow keys until the STATUS menu is highlighted.

2. Push the yellow button to access the status menu.

3. Push the arrow keys until the display FW menu is highlighted.

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 11 of 33

4. Push the yellow button to access the status menu.

5. Push the up/down buttons to locate the library (application), drive # and RMU FW versions

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 12 of 33

Scalar 100 (Library, Drives, RMU, SNC and AMC) Remote Identification (Library, Drives, RMU, SNC and AMC)

Library and RMU FW: Go to the RMU Status tab. (Library FW and RMU FW circled below)

Drive FW: Go to the RMU Firmware tab. If not logged in, enter your login name and password (the default login is “admin” and the default password is “secure”) and select submit. The current drive FW version is displayed in the circles below (25D4).

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 13 of 33

SNC Version: Open the AMC client. If not logged in, enter your login name and password (the default login is “admin” and the default password is “password”) and select submit. The AMC firmware version is circled below.

AMC for the SC100: Open the AMC client. If not logged in, enter your login name and password (the default login is “admin” and the default password is “password”) and select submit.

1. Select Help and About

The AMC software versions are circled above

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 14 of 33

Physical Location: The shipping label contains the library and drive firmware levels at the time of shipment. If your product is not new, please use the RMU or operator panel.

Using the Operator Panel (Library, RMU and Drives):

1. Select More 2. Select About

3. Library Firmware is circled. 4. Select Details for more Firmware

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 15 of 33

6. Select Details until RMU Firmware is displayed. Note: The drive App and boot code are not the drive firmware version. See below to find drive firmware: For Drive Firmware Versions

1. Select Status 2. Select Drives

3. Drive Firmware circled. Select Change Drive for info on additional drives.

Scalar 218 (Library): Remote Identification: No remote identification options Physical Location: No physical listing of the Firmware Version Using the Operator Panel:

1. Go to the diagnostic menu and select enter

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 16 of 33

2. Go to the Firmware Revision screen and select enter

3. The Firmware version is circled above. Press ESC to return.

Scalar 220 (Library): Remote Identification: No remote identification options Physical Location: No No physical listing of the Firmware Version Using the Operator Panel: The firmware version comes up on the main screen when power is applied to the library.

Scalar 224/234/424/434/448/458 (Library): Remote Identification: No remote identification options Physical Location: No physical listing of the Firmware Version Using the Operator Panel: Using the Operator Panel:

1. Go to the diagnostic menu and select enter

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 17 of 33

2. Go to the Firmware Revision screen and select enter

3. The Firmware version is circled above. Press ESC to return.

Scalar 440/480 (Library): Remote Identification: No remote identification options Physical Location: Look on the back of the Scalar 480. There will be a sticker in the middle and at the bottom of the Scalar 480 frame, next to the AC power cord. Example: (S/N 12000123) Using the Operator Panel: The firmware version comes up on the main screen when power is applied to the library.

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 18 of 33

Scalar 1000 (Library, Drives, RMU, SNC and AMC) Remote Identification (Library, RMU, SNC and AMC)

Library and RMU FW: Go to the RMU Status tab. (Library FW and RMU FW circled below)

Drive FW: Only available off the Operator Panel. See “Using the Operator Panel” section below. The same sequesnce can be used for the RMU.

SNC Version: Open the AMC client. If not logged in, enter your login name and password (the default login is “admin” and the default password is “password”) and select submit. The AMC firmware version is circled below.

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 19 of 33

AMC for the SC1000: Open the AMC client. If not logged in, enter your login name and password (the default login is “admin” and the default password is “password”) and select submit.

1. Select Help and About

The AMC software versions are circled above

Physical Location: No physical listing of the Firmware Version Using the Operator Panel (Library, RMU and Drives): Not available from the display

1. Select ENTER 2. Use the arrow keys to move to “About” and select ENTER

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 20 of 33

3. The Library and RMU Firmware is circled above Drive Firmware Versions Go to: Main Screen > Status > Drives > Drive State > Then input the coordinate of the desired drive. You can also find the Library and Drive firmware versions from the AMC Client session when you look at the devices on the appropriate SCSI channels.

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 21 of 33

Scalar i2000 (Library, Drvies and SNC) Note: Remote monitoring and the AMC software are integrated into the standard library firmware for the i2000 Remote Identification: Use Scalar i2000 Library Management Console

1. Select Help and About

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 22 of 33

The Library FW is circled above Drive Firmware Versions Use Scalar i2000 Library Management Console

Select Monitor and Drives

Drive Firmware versions are circled. SNC Firmware Versions The SNC firmware is packaged within the library firmware. It is not necessary to independently determine this firmware level Physical Location: No physical listing of the Firmware Version Using the Operator Panel: Same as the remote identification

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 23 of 33

Scalar 10K (Library, Drives, RMU, SNC and AMC) Remote Identification (Library, Drives, RMU, SNC and AMC)

Library and RMU FW: Go to the RMU Status tab. (Library FW and RMU FW circled below)

Drive FW: Only available off the Operator Panel. See “Using the Operator Panel” section below. The same sequesnce can be used for the RMU.

SNC Version: Open the AMC client. If not logged in, enter your login name and password (the default login is “admin” and the default password is “password”) and select submit. The AMC firmware version is circled below.

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 24 of 33

AMC for the SC10K: Open the AMC client. If not logged in, enter your login name and password (the default login is “admin” and the default password is “password”) and select submit.

1. Select Help and About

The AMC software versions are circled above

Physical Location: No physical listing of the Firmware Version Using the Operator Panel (Library and Drives) Library Firmware from the SC10K Operator Panel

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 25 of 33

1. Select ENTER

2. Use the arrow keys to move to “Status” and select ENTER

3. Use the arrow keys to move to “Library>” and select ENTER

4. Use the arrow keys to move to “Firmware.” and select ENTER

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 26 of 33

5. The library Firmware is circled above Drive Firmware from the SC10K Operator Panel

1. Select ENTER

2. Use the arrow keys to move to “Status>” and select ENTER

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 27 of 33

3. Move to “Drives>”, select ENTER 4. Move to “Firmware.”, select ENTER

5. Use the arrow keys and the ENTER key to select the coordinate of the drive

6. Move to Accept by selecting the ENTER key. Change from N to Y using the arrow key. Then select ENTER.

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 28 of 33

The drive firmware is circled above

AML 2/E/J (Library and Drives) Remote Identification: No remote identification options Physical Location: No physical listing of the Firmware Version Using the Operator Panel: Not available from the display

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 29 of 33

Pathlight VX (Library and SNC) Note: Remote monitoring and the AMC software are integrated into the standard library firmware for the i2000 Remote Identification: Use Pathlight Library Management Console

1. Select Tools and System Configurations for the SNC firmware and About Pathlight for the library firmware.

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 30 of 33

SNC firmware version is circled above (I/O Blade Version)

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 31 of 33

Library firmware version is circled above (CLM Version) Physical Location: No physical listing of the Firmware Version Using the Operator Panel: No local display for Pathlight

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 32 of 33

Software Products (Software Versions)

StorNext Management Suite Method 1: From the command line run the ‘cat /usr/adic/.version’ Example: # cat /usr/adic/.version 2.2.1(45) # Method 2: On the StorNext GUI Home screen select Help -> Version

StorNext File System From the command line run the command ‘/usr/cvfs/bin/cvversions’ Example: # /usr/cvfs/bin/cvversions File System Server: Server Revision 2.2.1 Build 52 Built for SunOS 5.8 Created on Thu May 6 15:14:14 MDT 2004 File System Client: Client Revision 2.2.1 Build 52 Built for SunOS 5.8 Created on Tue Feb 10 14:20:31 MST 2004 #

AMASS From the command line run the command ‘/usr/amass/bin/amassstat –v’ Example: # /usr/amass/bin/amassstat -v 5.3.3 (rev 37) #

How to Find ADIC Firmware and Software Versions Revison January, 2005 Page 33 of 33

Data Manager From the command line run the command ‘/etc/dm/usr/utils/dm_version’ Example: # /etc/dm/usr/utils/dm_version System information: SunOS brutus 5.6 Generic_105181-23 sun4u sparc SUNW,Ultra-1 DataMgr software Version 3.5.1, Revision 4 DataMgr DMFS Driver version 3.5.1, Device major number 143 DataMgr software serial number: 123 DataMgr software authorization string: H747GJLMNPUV6K4U6RFW56Q # FileServ From the command line run the command ‘fsversion’ Example: # fsversion FS0418 29 141884 fsversion completed: Current FileServ software version is 4.4.2 # VolServ On the vswin GUI screen select Options -> Copyright Scalar DLC Login as administrator On the bottom of the windows screen “right click” on the 3 penguins and then click “About”