Adhesives And Their Uses
-
Upload
jillian-fry -
Category
Documents
-
view
55 -
download
8
description
Transcript of Adhesives And Their Uses
![Page 1: Adhesives And Their Uses](https://reader036.fdocuments.in/reader036/viewer/2022081417/56813152550346895d97cdb4/html5/thumbnails/1.jpg)
Adhesives And Their
Uses
![Page 2: Adhesives And Their Uses](https://reader036.fdocuments.in/reader036/viewer/2022081417/56813152550346895d97cdb4/html5/thumbnails/2.jpg)
PVA adhesivePVA Adhesive (Polyvinyl Acetate) is a water based adhesive that is white and creamy in appearance. It used for gluing wood to wood. PVA is applied as a thin layer on one surface then the work is cramped, excess glue removed and left to cure. The adhesive sets in 2 hours and is fully cured within 24 hours. PVA adhesive is generally Not Waterproof and therefore unsuitable for exterior work.
![Page 3: Adhesives And Their Uses](https://reader036.fdocuments.in/reader036/viewer/2022081417/56813152550346895d97cdb4/html5/thumbnails/3.jpg)
PVA adhesive
One of the main problems with PVA adhesive is illustrated in these three pictures. If a glue stain is left on the surface of the wood this will prevent varnish from penetrating the wood properly and leave a white stain.Too much glue
applied
Glue carelessly wiped off White staining showing glue
![Page 4: Adhesives And Their Uses](https://reader036.fdocuments.in/reader036/viewer/2022081417/56813152550346895d97cdb4/html5/thumbnails/4.jpg)
Using PVA adhesive
1) Remove any dust from the joint
2) Apply PVA adhesive to all contact surfaces
3) Spread glue thoroughly
4) Clamp
5) Remove excess glue with damp cloth and allow to dry
6) Finished
![Page 5: Adhesives And Their Uses](https://reader036.fdocuments.in/reader036/viewer/2022081417/56813152550346895d97cdb4/html5/thumbnails/5.jpg)
Cyanoacrylate adhesiveCyanoacrylate Adhesive (super glues) has been formulated to quickly bond rubber, plastics,metal, and ceramics.
CautionCare must be taken to avoid contact with skin/eyes as this type of adhesive sets in seconds
![Page 6: Adhesives And Their Uses](https://reader036.fdocuments.in/reader036/viewer/2022081417/56813152550346895d97cdb4/html5/thumbnails/6.jpg)
Cascamite is a waterproof, synthetic resin adhesive for use for joining wood to wood especially outside woodwork and boat building.
Cascamite adhesive
Supplied as a powder to be mixed with water. To mix add 2 parts powder to 1 part water (by weight) in a non metallic container and mix into a creamy paste.This glue is then applied to the joint and cramped for 6 hours.
Cascamite is a waterproof adhesive suitable for outdoor use.
![Page 7: Adhesives And Their Uses](https://reader036.fdocuments.in/reader036/viewer/2022081417/56813152550346895d97cdb4/html5/thumbnails/7.jpg)
Epoxy Resin adhesive
Epoxy resin adhesives are generally two part adhesives (Adhesive & Hardener) When mixed they can be used to bond most materials. Typically Wood, Ceramics, Glass, Metals, Rubber, Fabric, Leather and most Hard Plastics.
![Page 8: Adhesives And Their Uses](https://reader036.fdocuments.in/reader036/viewer/2022081417/56813152550346895d97cdb4/html5/thumbnails/8.jpg)
Impact adhesiveEVOSTIK IMPACT ADHESIVE
This is a one part contact adhesive ideal for numerous jobs around the home and in the workshop.Impact adhesives provide a strong bond on contact without the need for jigs, clamps or weights.
Suitable for bonding many types of substrates. Typically you could use an impact adhesive to glue Plastic Laminate to a kitchen worktop
Warning Impact adhesive should only be used in a well ventilated area as this type of adhesive can produce noxious fumes.
Plastic Laminate
![Page 9: Adhesives And Their Uses](https://reader036.fdocuments.in/reader036/viewer/2022081417/56813152550346895d97cdb4/html5/thumbnails/9.jpg)
Tensol Cement is a single component adhesive used to glue Acrylic to Acrylic. This type of adhesive hardens due to solvent evaporationto produce a clear bond in cast acrylic sheets.The product is quickly and easily used direct from the bottle and cures within 24 hrs.
Tensol Cement
Warning Tensol Cement should only be used in a well ventilated area as this type of adhesive produces noxious fumes.
Acrylic to Acrylic.
![Page 10: Adhesives And Their Uses](https://reader036.fdocuments.in/reader036/viewer/2022081417/56813152550346895d97cdb4/html5/thumbnails/10.jpg)
The End