Additives & Lubricants

Matex Core Drilling Additives

DD Xpress All-In-One-PailAn environmentally safe DSPA (Dry Suspended Polyacrylamide). Add to water to create a very high viscosity drilling fluid used for removal of cuttings, continuous borehole wall conditioning, in hole torque reduction and optimized core recovery. Protecting against rod wear, preventing rust and polymer build up while extending all tool life.

Ultravis Viscosity ControlAn easy to mix highly concentrated liquid polymer. Mixed with Torqueless and water creating a high viscosity drilling fluid used for removal of cuttings and continuous borehole wall conditioning.

Sand Drill StabilizerA drilling additive for reducing the difficulties of drilling overburden, sand, gravel and cobbles while achieving maximum potential core recovery in these conditions.

ES Thread ControlAn environmentally safe vegetable oil based replacement for the present pipe dopes that contain heavy metals and petroleum carriers.

Sand Xpress All-In-One-PailAn environmentally safe DSPA (Dry Suspended Polyacrylamide). Add to water to create a drilling fluid designed to reduce the difficulties of drilling unconsolidated formations while achieving maximum potential performance and core recovery in sands and gravels.

Slo-Freeze ES Fluid ControlAn environmentally safe DSPA (Dry Suspended Polyacrylamide). Add to water to create a drilling fluid designed to reduce the difficulties of drilling unconsolidated formations while achieving maximum potential performance and core recovery in sands and gravels.

DD X-Pand StabilizerAn environmentally safe, solid, granular polymer that helps minimize water loss. When introduced to water, DD X-Pand expands 50 to 100 times its size, making it an ideal application to shut off water flows or plug voids.

Hole ControlAn environmentally safe, solid, granular polymer that helps minimize water loss. When introduced to water, DD X-Pand expands 50 to 100 times its size, making it an ideal application to shut off water flows or plug voids.

DD-2000 Viscosity ControlAn environmentally safe dry powdered polymer. DD 2000 is mixed with Torqueless and water to create a very high viscosity drilling fluid used for removal of cuttings and continuous borehole wall conditioning.

Torqueless Torque ReducerThe ultimate rotary and diamond drilling product for in hole torque reducing. Protects against rod wear, prevents rust, and extends bit life.

Core Wrap Viscosity ControlCore Wrap is a new powdered polymer that helps improve core recovery, especially in difficult ground conditions. As the name suggests, this drilling fluid additive wraps the core in a protective film that helps prevent crumbling and breakage. The protective film also adheres to the walls of the bore hole to increase stability of the hole.

RDO 302 ESAn environmentally safe product developed for reverse circulation DTH hammers. RDO-302ES rock drill oils are used to reduce wear and improve performance.

DD-955 Viscosity ControlA multi-charged liquid formation stabilizer for use with shale and clay reducing inhole swelling and instability problems.

Matex Air Drilling Additives

Matex Core Drilling Additives

Matex Core Drilling Additives

Matex Xpress Drilling Additives

Drilling fluid additives are great products that can help resolve a lot of issues that are a result of difficult ground conditions often found in mineral exploration, geotechnical and environmental drilling.

Using drilling fluid additives can have a significant positive impact on drilling performance. Drillers routinely encounter abrasive or fragmented ground, flowing sands and dry hole conditions.

See our products at www.fordia.com

Fab Four

Fab FourFab Four

Fab Four

New