adding devices to cacti monitoring system
-
Upload
jh0n-fredy-h -
Category
Documents
-
view
222 -
download
0
Transcript of adding devices to cacti monitoring system
-
8/14/2019 adding devices to cacti monitoring system
1/6
-
8/14/2019 adding devices to cacti monitoring system
2/6
# When you save the configuration cacti add additional options
By default cacti add SNMP Interface statistics as Data Query we can use
it to monitor a specific interface.
# Click Create Graphs for this host
Check Cisco CPU Usage
# Click to Create
# We can select the color to use with the graphic # Click create
-
8/14/2019 adding devices to cacti monitoring system
3/6
# Now, we need to enable snmp in the SW2
snmp-server community public RO
snmp-server location MEDELLIN/COLOMBIA
snmp-server host 192.168.180.3 version 2c public
snmpwalk -v 2c -c public 192.168.180.4 sysUpTimeInstance
snmpwalk -v 2c -c public 192.168.180.4 .1.3.6.1.2.1.4.20.1.2
-
8/14/2019 adding devices to cacti monitoring system
4/6
As we can see the NMS is sending snmp queries
Now in the host configuration click Create Graphs for this Host
Select Vlan11 and In/Out Bytes with Total Bandwidth and click to create
-
8/14/2019 adding devices to cacti monitoring system
5/6
Now over Devices we can see that SW1 have two Data Sources and Two Graphs.
Select Graph Trees, select Routes click add
Click to Create
-
8/14/2019 adding devices to cacti monitoring system
6/6
Now, select Graphs tab and select the device desired