ADA Ramp - Deck and Leg Set Up Guide for 282A019 - 24” (61 ... 282A019 ADA Ramp Setup.pdf · LDB...
Transcript of ADA Ramp - Deck and Leg Set Up Guide for 282A019 - 24” (61 ... 282A019 ADA Ramp Setup.pdf · LDB...
This guide shows assembled component placement only, see the Assembly Instructions for assembly procedures.
ADA Ramp - Deck and Leg Set Up Guidefor 282A019 - 24” (61 cm) Elevation Ramp
with Right Hand Switchback and Left Hand Landing
1Deck
2Deck
3LHRail
Wenger Corporation555 Park Drive, P.O. Box 448Owatonna, MN 55060 U.S.A.(800) 4WENGER (493-6437) 1-507-455-4100wengercorp.com
12-1/2”(32 cm)Deck
Elevation
24”(61 cm)Seam
Elevation
12-1/2”(32 cm)Deck
Elevation
24”(61 cm)Deck
Elevation
3Deck
6Deck
7Deck
5Deck
4Deck
1Deck
2Deck
3Deck
6Deck
7Deck
5Deck
4Deck
24”(61 cm)Deck
Elevation
Dow
n from S
witchback
Up from
Sw
itchback
©Wenger Corporation 2016 Printed in USA 06/16 Part #282A298-01
SBRail
SwitchbackBracket
4LHRail
2LHRail
2RHRail
5RHRail
5LHRail
1LHRail
1RHRail
6RHRail 6LH
Rail
LDBRail
LDARail
LDCRail
12-1/2”(32 cm)Seam
Elevation
12-1/2”(32 cm)Seam
Elevation
24”(61 cm)Seam
Elevation
20-1/2”(52 cm)Seam
Elevation
20-1/2”(52 cm)Seam
Elevation
4-1/2”(12 cm)Seam
Elevation
4-1/2”(12 cm)Seam
Elevation
Shown with optional Mid Rails
To Stage
SwitchbackDown BracketPre-attached
to Deck 3
Flat FootLeg
Flat FootLeg
RailPocket
RailPocket
RailPocket
RailPocket
SwivelFoot Leg
Leg heights may need to be adjusted to accommodate elevation changes and differences.
Up BracketPre-attached
to Deck 4
Two Leg DeckConnector
Down BracketPre-attached
to Deck 7
Rampto Deck
Connector
FlatFoot LegwithoutInsert
FlatFoot LegwithoutInsert
Flat FootLeg
Flat FootLeg
ADA Ramp - Rail Set Up Guide for 282A019 - 24” (61 cm) Elevation Ramp
with Right Hand Switchback and Left Hand Landing
Wenger Corporation555 Park Drive, P.O. Box 448Owatonna, MN 55060 U.S.A.(800) 4WENGER (493-6437) 1-507-455-4100wengercorp.com
©Wenger Corporation 2016 Printed in USA 06/16 Part #282A298-01
Shown without optional Mid Rails
3LH
SB
4LH
2LH
2RH
5RH
5LH
1LH
1RH
6RH
6LH
LDBLDA
LDC
Toe Kicks always toward inside
1RHApproachInside Rail
2RH8’ RH Inside
Switchback Down Rail
1LHApproach
Outside Rail
2LH8’ LH Outside
Switchback Down Rail
3LH 5’ LH Outside
Switchback LandingDown Rail
6RH42” RH Inside
Landing Up Rail5RH
8’ RH InsideSwitchback Up Rail
LDB 5’ RH Inside
Landing Down Rail
LDC RH No Turn
Top Landing Rail
SB8’ SwitchbackLanding Rail
6LH 42” LH OutsideLanding Up Rail5LH
8’ LH OutsideSwitchback Up Rail
4LH5’ LH Outside
Switchback LandingUp Rail
LDALH Turn
Top Landing Rail
This guide shows assembled component placement only,see the Assembly Instructions for assembly procedures.