7/25/2019 ACS11

1/3

Chevron U.S.A. Inc. CLASS 150 CARBON STEEL ACS11

February 2012

Page 1 of 3

SERVICE: Process Sweet MATERIAL: Carbon Steel

RATING CLASS: 150, ASME B16.5-2009/B16.47-2006 DESIGN CODE: ASME B31.3-2010

TEMPERATURE LIMIT: -20F TO 400F (-29C to 204C) STRESS RELIEF: Not Required

NOMINAL CORROSION ALLOWANCE: 0.0625 inches (0.0500 inches MIN) EXAMINATION: 5% RT, PT, Visual.

VALVE TRIM: API# 12 ( 316 SS & HF) RATING LIMITED BY: Flanges

PRESSURE-TEMPERATURE RATINGS per ASME B16.5 Table 2-1.1 AND

B16.47 TABLE 3 - 1.

TEMP F -20 to 100 200 300 400 Hydrotest @ Ambient

TEMP C -29 to 38 93 149 204

psig 285 260 230 200 450

kPag 1965 1795 1585 1380 3110

PIPE NPS SCH/RAT DESCRIPTION NOTES

- 3/4 160 CS, SMLS, ASTM A106-B

1 2 XS CS, SMLS, ASTM A106-B

3 24 STD CS, SMLS, ASTM A106-B

30 36 STD CS, EFW, ASTM A671 CC60, CLASS 12, S-2

42 48 XS CS, EFW, ASTM A671 CC60, CLASS 12, S-2

NIPPLES NPS SCH/RAT MARK ENDS DESCRIPTION NOTES

Branch 1/2 3/4 160 THRD CS, SMLS, ASTM A106-B 03

Swage 1/2 3/4 160 THRD CS, ASTM A234-WPB-S, MSS SP-95 03

FITTINGS NPS SCH/RAT MARK ENDS DESCRIPTION NOTES

Cap 1/2 3/4 Class 3000 THRD CS, ASTM A105, ASME B16.11 03

Coupling 1/2 3/4 Class 3000 THRD CS, ASTM A105, ASME B16.11 03

Plug 1/2 3/4 Solid THRD CS, ASTM A105, ROUND HEAD, ASME B16.11 03Thredolet 1/2 3/4 Class 3000 THRD CS, ASTM A105, MSS SP-97 03

45 ELL LR 1/2 24 WELD CS, ASTM A234-WPB-S, ASME B16.9 02

45 ELL LR 26 48 WELD CS, ASTM A234-WPB-W, ASME B16.9 02

90 ELL LR 1/2 24 WELD CS, ASTM A234-WPB-S, ASME B16.9 02

90 ELL LR 26 48 WELD CS, ASTM A234-WPB-W, ASME B16.9 02

Cap 1/2 48 WELD CS, ASTM A234-WPB-S, ASME B16.9 02

Reducer 1/2 24 WELD CS,ASTM A234-WPB-S, ASME B16.9 02

Reducer 26 48 WELD CS,ASTM A234-WPB-W, ASME B16.9 02

Tee 1/2 24 WELD CS,ASTM A234-WPB-S, ASME B16.9 02

Tee 26 48 WELD CS,ASTM A234-WPB-W, ASME B16.9 02

FLANGES NPS SCH/RAT MARK ENDS DESCRIPTION NOTES

Blind Spectacle 1/2 12 Class 150 RF CS, ASTM A516-70, ASME B16.48 11

Spacer Ring 14 24 Class 150 RF CS, ASTM A516-70, ASME B16.48 11

Blind Plate 14 24 Class 150 RF CS, ASTM A516-70, ASME B16.48 11

Blind 1/2 24 Class 150 RF CS, ASTM A105, ASME B16.5 11

Blind 26 48 Class 150 RF CS, ASTM A105, ASME B16.47, Series A 11, 501

Orifice 2 24 Class 300 RF CS, ASTM A105, ASME B16.36, 3/4 SW Taps 02

Weld Neck 1/2 24 Class 150 RF CS, ASTM A105, ASME B16.5 02, 11

Weld Neck 1/2 24 Class 300 RF CS, ASTM A105, ASME B16.5 02, 11

Weld Neck 26 48 Class 150 RF CS, ASTM A105, ASME B16.47, Series A 02, 11, 501

GASKETS NPS SCH/RAT MARK ENDS DESCRIPTION NOTES

1/2 24 Class 150 ASME B16.20 Spiral wound type 316L SS w/flexible

graphite filler and 316L inner ring

14

1/2 24 Class 150 KAM style, 316L SS w/APX-2 Graphite,

EXH-SU-5151

301

1/2 24 Class 300 ASME B16.20 Spiral wound type 316L SS w/flexible

graphite filler and 316L inner ring

14

1/2 24 Class 300 KAM style, 316L SS w/APX-2 Graphite,

EXH-SU-5151

301

26 48 Class 150 ASME B16.20 Spiral wound type 316L SS w/flexible

graphite filler and 316L inner ring (B16.47 Series A)

14, 501

BOLTING MARK DESCRIPTION NOTES

Stud Bolts 1/2 48 ASTM A193 Gr. B7 stud w/2 ASTM A194 Gr. 2H heavy hex

nuts, PTFE coated per PIM-SU-5300 TABLE 2.

7/25/2019 ACS11

2/3

Chevron U.S.A. Inc. CLASS 150 CARBON STEEL ACS11

February 2012

Page 2 of 3

VALVES NPS SCH/RAT MARK ENDS DESCRIPTION NOTES

Globe 1/2 1-1/2 Class 800 GL300 SW ITCS Body, Trim API #12

Globe 2 3 Class 150 GL500 RF ITCS Body, Trim API #12

Globe 4 12 Class 150 GL500G RF ITCS Body, Trim API #12, GO

Check 1/2 1-1/2 Class 800 CS300 SW ITCS Body, Trim API #12, Swing Check 62

Check 2 24 Class 150 CD700 ITCS Body w/316 SS Dual Plates, Lug Style API 594,TRIM #12

07, 63

Check 26 48 Class 150 CD701 ITCS Body w/316 SS Dual Plates, Lug Style API 594, TRIM#12, ASME B16.47 Series A

07, 63

Ball 1/2 1-1/2 Class 300 BA300 SW ITCS Body 316 SS Ball & Stem, RP, RTFE Seats 09

Ball 1/2 1-1/2 Class 300 BA210 T/SW ITCS Body 316 SS Ball & Stem, RP, RTFE Seats 06, 09Ball 2 6 Class 150 BA500 RF ITCS Body 316 SS Ball & Stem, RP, RTFE Seats 09

Ball 2 6 Class 150 BA501 RF ITCS Body 316 SS Ball & Stem, FP, RTFE Seats 08, 09

Ball 8 24 Class 150 BA502G RF ITCS body 316 SS Ball & Stem , RP, RTFE Seats, GO 09

Ball 8 24 Class 150 BA504G RF ITCS body 316 SS Ball & Stem , FP, RTFE Seats, GO 08, 09

Butterfly 8 24 Class 150 BF500G RF ITCS body, 316 SS Disc, Metal Seats, Triple Offset, Double

Flanged, GO

09

Butterfly 26 48 Class 150 BF501G RF ITCS body, 316 SS Disc, Metal Seats, Triple Offset, DoubleFlanged, GO, ASME B16.47 Series A

09

90 BRANCH CONNECTION

Legend and Chart

BRANCHS

IZE

48 T LEGEND

RT Reducing Tee

T Tee

W Weldolet

NOTES: 05

42 RT T

36 RT RT T

30 RT RT RT T

24 RT RT RT RT T

20 W RT RT RT RT T

18 W RT RT RT RT RT T

16 W RT RT RT RT RT RT T

14 W W W RT RT RT RT RT T

12 W W W RT RT RT RT RT RT T

10 W W W RT RT RT RT RT RT RT T

8 W W W W W RT RT RT RT RT RT T

6 W W W W W W W RT RT RT RT RT T

4 W W W W W W W W W W RT RT RT T

3 W W W W W W W W W W W W RT RT T

2 W W W W W W W W W W W W W RT RT T

1-1/2 W W W W W W W W W W W W W W W RT T

1 W W W W W W W W W W W W W W W W RT T

3/4 W W W W W W W W W W W W W W W W RT RT T

1/2 W W W W W W W W W W W W W W W W RT RT RT T

48 42 36 30 24 20 18 16 14 12 10 8 6 4 3 2 1-1/2 1 3/4 1/2

HEADER SIZE

7/25/2019 ACS11

3/3

Chevron U.S.A. Inc. CLASS 150 CARBON STEEL ACS11

February 2012

Page 3 of 3

NOTES

02 All Butt-welded component thickness shall match pipe thickness.

03 Threaded joints are permitted only at outlet of vent and drain valves, at hydrostatic connections, at outlet of instrument take-off valves and to matchequipment.

05 Integrally reinforced branch connections outside the sizes shown in the branch connection tables are permitted. If applicable, weld thickness of integrallyreinforced branch connection shall be checked to determine if PWHT is required.

06 These valves shall be used only for vent, drain, and instrument connections.

07 These valves have no flanges, but are installed between line flanges with extra length bolts.

08 Full port valves shall be used when indicated on the P&ID.09 Pressure and temperature may be limited for these valves. Refer to manufacturer 's recommended pressure temperature limits.

11 Provide flat face flanges to mate to flat face equipment nozzles or other flat face flanges.

14 Full-face gaskets shall be used at flat faced flanges.

15 These valves shall be used when mating to flanged nozzles.

26 To be used only when indicated on P&ID.

62 These check valves shall be installed in horizontal position with cover up or in vertical position with upward flow.

63 These check valves shall be installed in a horizontal position with hinge pin vertical or in a vertical position with upward flow.

301 For use in VOC regulated services; in flanges with slightly damaged gasket seating faces; or in flanges with history of leakage.

501 Use ASME B 16.47 Series B flanges when mating to ASME B 16.47 Series B flanges.

SERVICE TABLE

Service

Air Instrument

Diesel Fuel

Equipment Exhaust

Fuel Gas

Hydrocarbon Liquid & Gas Sweet

Glycol

Nitrogen

Process Liquid & Gas Sweet

Produced Water Sweet