Acrylic floor finish - ABC Compounding tds.pdfUSE DIRECTIONS (New/existing floors) Thoroughly strip...
1
This metal-crosslinked, all acrylic floor finish provides superior durability and dirt resistance. It can be maintained with either conventional low-speed programs or infrequent (2-3 times a week) high speed burnishing. USE DIRECTIONS (New/existing floors) Thoroughly strip floor with a stripper. Rinse floor thoroughly with clean water. Apply a sealer base (optional) to worn floors or high traffic floors to improve wear resistance and enhance gloss. Apply 2-4 coats of floor finish in uniform thin coats allowing time to dry thoroughly between coats. Allow for longer drying time in damp weather. MAINTENANCE: Sweep as necessary. Damp mop or scrub lightly with a mild, neutral detergent. Spray buff or buff lightly with appropriate pad. Also excellent for high speed buffing. In high traffic areas, re-coat worn spots as necessary. HIGHLIGHTS Outstanding durability with low maintenance programs Metal crosslinked all acrylic polymers Superior dirt resistance Excellent burnish response with no powdering or dusting Decreased labor cost through less frequent need to buff, burnish and re-coat, and a reduction in the number of floor strippings l l l l l SAFETY CAUTIONS Keep out of reach of children It is recommended that protective gloves and safety glasses be worn when using this product Make sure there is adequate ventilation Refer to M.S.D.S. for additional safety information l l l l TYPICAL PROPERTIES l l l l o l l l l l l l l l Specific Gravity: 1.03 Solids: 22% pH: 8.5 James Static Coefficient f Friction: 0.6 Leveling: Excellent Film Formation: Excellent Gloss: Excellent Water resistance: Excellent Detergent resistance: Excellent Removability: Excellent Black heal mark resistance: Excellent Odor: Mild acrylic Appearance: White emulsion HMIS RATINGS resilient floor care aero ® Acrylic floor finish to Believe! to Believe! ® Extreme durability Superior dirt resistance l l Flammability Health Reactivity Personal Protection 0 0 1 B Manufactured exclusively by: ABC Compounding Co., Inc. P. O. Box 16247, Atlanta, GA 30321 AERO is a registered trademark of ABC Compounding Co., Inc. 6967TDS-1409rev.
Transcript of Acrylic floor finish - ABC Compounding tds.pdfUSE DIRECTIONS (New/existing floors) Thoroughly strip...
This metal-crosslinked, all acrylic floor finish provides superior durability and dirt resistance. It can be maintained with either conventional low-speed programs or infrequent (2-3 times a week) high speed burnishing.
USE DIRECTIONS (New/existing floors)
Thoroughly strip floor with a stripper. Rinse floor thoroughly with clean water. Apply a sealer base (optional) to worn floors or high traffic floors to improve wear resistance and enhance gloss. Apply 2-4 coats of floor finish in uniform thin coats allowing time to dry thoroughly between coats. Allow for longer drying time in damp weather.
MAINTENANCE: Sweep as necessary. Damp mop or scrub lightly with a mild, neutral detergent. Spray buff or buff lightly with appropriate pad. Also excellent for high speed buffing. In high traffic areas, re-coat worn spots as necessary.
HIGHLIGHTS
Outstanding durability withlow maintenance programs
Metal crosslinked all acrylicpolymers
Superior dirt resistance
Excellent burnish responsewith no powdering or dusting
Decreased labor costthrough less frequent need tobuff, burnish and re-coat, anda reduction in the number offloor strippings
l
l
l
l
l
SAFETY CAUTIONS
Keep out of reach of children
It is recommended that protective gloves and safety glasses be worn when using this product
Make sure there is adequateventilation
Refer to M.S.D.S. for additional safety information
l
l
l
l
TYPICAL PROPERTIES
l
l
l
lo
l
l
l
l
l
l
l
l
l
Specific Gravity: 1.03
Solids: 22%
pH: 8.5
James Static Coefficientf Friction: 0.6
Leveling: Excellent
Film Formation: Excellent
Gloss: Excellent
Water resistance: Excellent
Detergent resistance: Excellent
Removability: Excellent
Black heal mark resistance: Excellent
Odor: Mild acrylic
Appearance: White emulsion
HMIS RATINGS
resi
lient
floo
r car
eae
ro®
Acrylic floor finish
to Believe!to Believe!
®
Extreme durability
Superior dirt resistance
l
l
Flammability
Health Reactivity
Personal Protection
001
B Manufactured exclusively by:ABC Compounding Co., Inc. P. O. Box 16247, Atlanta, GA 30321AERO is a registered trademark of ABC Compounding Co., Inc. 69
67TD
S-14
09re
v.
