ACOUSTOELECTRIC DEVICES IEC - TISIlibrary.tisi.go.th/downloadable/new_release/33_jan-mar53.pdf ·...

TISI Library Accession Lists (Jan-Mar 2010)

TISI Library Accession List

(January-March 2010)

ACOUSTOELECTRIC DEVICES IEC

IEC 60318-1 2009 Electroacoustics - Simulators of human head and ear - P. 1: Ear simulator for the measurement of supra-aural and circumaural earphones /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2009.

AEROSPACE TRANSPORT AWS

AWS D17.2/D17.2M 2007 Resistance welding for aerospace applications /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2007.

AIR ISO ISO 16000-9 2006 Indoor air - P. 9: Determination of the emission of volatile organic

compounds from building products and furnishing - Emission test chamber method /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO 16000-10 2006 Indoor air - P. 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO 16000-11 2006 Indoor air - P. 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

AIR -CONDITIONING EQUIPMENT BSI

BS EN 12102 2008 Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level /By British Standards Institution (BSI). London: BSI, 2008.


AIR-CONDITIONING SYSTEMS

BSI BS EN 12102 2008 Air conditioners, liquid chilling packages, heat pumps and dehumidifiers

with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level /By British Standards Institution (BSI). London: BSI, 2008.

AIRBORNE SOUND INSULATION BSI BS EN 12102 2008 Air conditioners, liquid chilling packages, heat pumps and dehumidifiers

with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level /By British Standards Institution (BSI). London: BSI, 2008.

AIRCRAFT BSI BS EN 3476 2006 Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Softened -

Forging stock - a or D ≤ 300 mm /By British Standards Institution (BSI). London: BSI, 2006.

ALKALI-RESISTANCE TESTS SPRING Singapore SS 5-G2 2003 Methods of test for paints, varnishes and related materials - P.G2: Alkali

resistance (spotting method) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

ALLOY STEELS AWS

AWS A5.20/A5.20M 2005 Carbon steel electrodes for flux cored arc welding /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2005.

ALTERNATING CURRENT SAA

AS 62271.102 2005 High voltage switchgear and controlgear - P. 102: Alternating current disconnectors and earthing switches /By Standards Australia (SAA). New South Wales: SAA, 2005.


ALUMINIUM BSI BS EN 1706 2010 Aluminium and aluminium alloys - Castings - Chemical composition and

mechanical properties /By British Standards Institution (BSI). London: BSI, 2010.

ALUMINIUM ALLOYS AWS AWS D3.7 2004 Guide for aluminium hull welding /By American Welding Society (AWS) and

American National Standards Institute (ANSI). Miami: AWS, 2004.

BSI BS EN 1706 2010 Aluminium and aluminium alloys - Castings - Chemical composition and

mechanical properties /By British Standards Institution (BSI). London: BSI, 2010.

AMBULANCES BSI

BS EN 1789 2007 Medical vehicles and their equipment - Road ambulances /By British Standards Institution (BSI). London: BSI, 2007.

ANIMAL FEED ISO ISO/TS 10272-3 2010 Microbiology of food and animal feeding stuffs - Horizontal method for

detection and enumeration of Campylobacter spp. - P. 3: Semi-quantitative method /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

APPROVAL TESTING SAA AS/NZS 3100 2009 Approval and test specification - General requirements for electrical

equipment /By Standards Australia (SAA). 3rd ed. New South Wales: SAA, 2009.

ARC WELDING AWS AWS A5.20/A5.20M 2005 Carbon steel electrodes for flux cored arc welding /By American

Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2005.


AWS A5.24/A5.24M 2007 Low-alloy steel electrodes and fluxes for submerged arc welding /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2007.

AWS A5.29/A5.29M 2005 Low-alloy steel electrodes for flux cored arc welding /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2005.

AWS D10.7M/D10.7 2008 Guide for the gas shielded arc welding of aluminium and aluminium alloy pipe /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2008.

AWS D16.1M/D16.1 2004 Robotic arc welding safety /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2004.

AWS D16.2M/D16.2 2007 Guide for components of robotic and automatic arc welding installations /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2007.

AWS D16.3M/D16.3 2009 Risk Assessment Guide for Robotic Arc Welding /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2009.

AWS D16.4M/D16.4 2005 Qualification of robotic arc welding personnel /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2005.

BSI

BS EN 1011-1 2009 Welding - Recommendations for welding of metallic materials - P. 1: General guidance for arc welding /By British Standards Institution (BSI). London: BSI, 2009.

ATOMS ISO

ISO 80000-10 2009 Quantities and units - P. 10: Atomic and nuclear physics /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

AUSTENITIC STEELS AWS

AWS A4.2M 2006 Standard procedures for calibrating magnetic instruments of measure the delta Ferrite content of austenitic and duplex Ferritic-austenitic stainless steel weld metal /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2006.


AUTOMOTIVE ENGINEERING AWS AWS D8.1M 2007 Automotive weld quality - Resistance spot welding of steel /By American

Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2007.

BANKS ISO ISO/TR 13569 2005 Financial services - Information security guidelines /By International

Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.

BAR CODES SPRING Singapore SS 362-1 2004 EAN bar coding system - P. 1: EAN -An unambiguous international product

identification system /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2004.

SS 362-2 2004 EAN bar coding system - P. 2: EAN code 128 and application identifier standard /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2004.

BELT DRIVES SAA AS 2784 2002 Endless wedge belt and V-belt drives /By Standards Australia (SAA). 2nd ed.

New South Wales: SAA, 2002.

BEND TESTING SPRING Singapore SS 5-F1 2003 Methods of test for paints, varnishes and related materials - P.F1: Bend test

(cylindrical mandrel) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

BIOLOGICAL ANALYSIS AND TESTING ISO ISO 10993-7 2008 Biological evaluation of medical devices - P.7: Ethylene oxide sterilization

residuals /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.


BLOOD TRANSFUSION EQUIPMENT ISO

ISO 1135-4 2010 Transfusion equipment for medical use - P. 4: Transfusion sets for single use /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2010.

ISO 3826-2 2008 Plastics collapsible containers for human blood and blood components - P. 2: Graphical symbols for use on labels and instruction leaflets /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

BOARD (PAPER) BSI BS EN 12497 2005 Paper and board - Paper and board intended to come into contact with

foodstuffs - Determination of mercury in an aqueous extract /By British Standards Institution (BSI). London: BSI, 2005.

ISO ISO 9197 2006 Paper, board and pulps - Determination of water-soluble chlorides /By

International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

BOILING PANS BSI

BS EN 203-2-3 2005 Gas heated catering equipment - P. 3: Specific requirements - Boiling pans /By British Standards Institution (BSI). London: BSI, 2005.

BOXES (ELECTRIC) BSI BS 4662 2006 Boxes for flush mounting of electrical accessories - Requirements, test

methods and dimensions /By British Standards Institution (BSI). London: BSI, 2006.

BRIDGES - STRUCTURAL STEELS AWS

AASHTO/AWS D1.5/D1.5 2008 Bridge Welding Code /By American Welding Society (AWS), American National Standards Institute (ANSI) and American Association of State Highway and Transportation Officials (AASHTO). 5th ed. Miami: AWS, 2008.


BRUSHING (COATING) SPRING Singapore

SS 5-B9 2003 Methods of test for paints, varnishes and related materials - P.B9: Brushing properties /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

BUILDING SITES Spring Singapore

CP 102 2004 Code of practice for Temporary housing quarters on construction sites /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2004.

CALIBRATING AWS


CARBON-ARC WELDING AWS

AWS A5.2/A5.2M 2007 Carbon and low-alloy steel rods for oxyfuel gas welding /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2007.

CARBON ELECTRODES AWS


CASTINGS BSI

BS EN 1706 2010 Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties /By British Standards Institution (BSI). London: BSI, 2010.


CATHETERS - RESPIRATORY SYSTEMS ISO

ISO 8836 2007 Suction catheters for use in the respiratory tract /By 11.040.25 and International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.

CERAMICS ISO

ISO 22197-1 2007 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - P. 1: Removal of nitric oxide /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

ISO 27447 2009 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antibacterial activity of semiconducting photocatalytic materials /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

CHARACTER SETS SPRING Singapore

SS 501-1 2003 Public key infrastructure security standards - P.1: Framework overview /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2003.

CHEMICAL ANALYSIS AND TESTING ISO

ISO 9197 2006 Paper, board and pulps - Determination of water-soluble chlorides /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

CHEMISTRY ISO

ISO 80000-9 2009 Quantities and units - P. 9: Physical chemistry and molecular physics /By International Organization for Standardization (ISO). Geneva: ISO, 2009.


CHILLIES SPRING Singapore

SS 487 2001 Chillies and capsicums, whole or ground (powdered) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2001.

CIRCUIT-BREAKERS SPRING Singapore

SS 97-1 2005 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - P. 1: General rules /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2005.

SS 480-1 2005 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - P. 1: General rules /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2005.

CLASSIFICATION SYSTEMS IEC

IEC 81346-2 2009 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - P. 2: Classification of objects and codes for classes /By International Electrotechnical Commission (IEC). Geneva: IEC, 2009.

CLEANING - PERFORMANCE SPRING Singapore

SS 533 2007 Cleaning performance for public housing estates /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2007.

COATINGS BSI

BS EN 13438 2005 Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes /By British Standards Institution (BSI). London: BSI, 2005.


SAA

AS 3894.2 2002 Site testing of protective coatings - M. 2: Non-conductive coatings - Continuity testing - Wet sponge method /By Standards Australia (SAA). New South Wales: SAA, 2002.

AS 3894.3 2002 Site testing of protective coatings - M. 3: Determination of dry film thickness /By Standards Australia (SAA). New South Wales: SAA, 2002.

CODES IEC IEC 61231 2010 International lamp coding system (ILCOS) /By International Electrotechnical

Commission (IEC). Geneva: IEC, 2010.

COLLAPSIBLE CONTAINERS ISO ISO 3826-2 2008 Plastics collapsible containers for human blood and blood components - P.

2: Graphical symbols for use on labels and instruction leaflets /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

COLOUR-FASTNESS TESTS SPRING Singapore SS 5-G3 2003 Methods of test for paints, varnishes and related materials - P.G3: Colour

fastness to light (Xenon arc) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

COMMUNICATION EQUIPMENT SPRING Singapore SS 337 2001 Safety of information technology equipment /By Singapore, Productivity and

Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2001.

COMPRESSED AIR

ISO

ISO 8573-2 2007 Compressed air - P. 2: Test methods for oil aerosol content /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.


COMPRESSORS BSI

BS EN 12102 2008 Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level /By British Standards Institution (BSI). London: BSI, 2008.

COMPUTER-AIDED DESIGN SPRING Singapore

CP 83-5 2001 Code of practice for construction computer-aided design (CAD) - P.5: Colour and linetype /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2001.

CONCRETES BSI

BS EN 13577 2007 Chemical attack on concrete - Determination of aggressive carbon dioxide content in water /By British Standards Institution (BSI). London: BSI, 2007.

CONFORMITY ASSESSMENT ISO

ISO/IEC 17043 2010 Conformity assessment - General requirements for proficiency testing /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

CONSTANT-STRESS FLEXOMETER ISO

ISO 4666-4 2007 Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - P. 4: Constant-stress flexometer /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

CONSTRUCTION MATERIALS BSI

BS EN 13577 2007 Chemical attack on concrete - Determination of aggressive carbon dioxide content in water /By British Standards Institution (BSI). London: BSI, 2007.


SPRING Singapore SS 70 2001 Clay roofing tiles and fittings /By Singapore, Productivity and Innovation Board

(SPRING Singapore). Singapore: SPRING Singapore, 2001.

COOKING APPLIANCES BSI BS EN 203-1 2005 Gas heated catering equipment - P. 1: General safety rules /By British

Standards Institution (BSI). London: BSI, 2005. BS EN 203-2-1 2005 Gas heated catering equipment - P. 2-1: Specific requirements - Open

burners and wok burners /By British Standards Institution (BSI). London: BSI, 2005. BS EN 203-2-3 2005 Gas heated catering equipment - P. 3: Specific requirements - Boiling

pans /By British Standards Institution (BSI). London: BSI, 2005. BS EN 203-2-9 2005 Gas heated catering equipment - P. 2-9: Specific requirements - Solid

tops, warming plates and griddles /By British Standards Institution (BSI). London: BSI, 2005.

CRANES ISO ISO 9926-3 2005 Cranes - Training of drivers - P. 3: Tower cranes /By International

Organization for Standardization (ISO). Geneva: ISO, 2005.

SPRING Singapore SS 536 2008 Code of practice for the safe use of mobile cranes /By Singapore, Productivity

and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2008.

CUTTING SPRING Singapore SS 510 2005 Code of practice for safety in welding and cutting (and other operations

involving the use of heat) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2005.

DAIRY PRODUCTS ISO ISO 3889 2006 Milk and milk products - Specification of Mojonnier-type fat extraction flasks

/By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.


DANGEROUS MATERIALS SPRING Singapore CP 100 2004 Code of practice for hazardous waste management /By Singapore, Productivity

and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2004. SS 532 2007 Code of practice for the storage of flammable liquids /By Singapore,

Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2007.

DENSITY MEASUREMENT SPRING Singapore SS 5-B7 2003 Methods of test for paints, varnishes and related materials - P.B7: Density /By

Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

DESIGN SIGNS SPRING Singapore SS 508-1 2004 Graphical symbols - Safety colours and safety signs - P.1: Design principles

for safety signs in workplaces and public areas /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2004.

DESIGNATIONS IEC IEC 81346-1 2009 Industrial systems, installations and equipment and industrial products -

Structuring principles and reference designations - P. 1: Basic rules /By International Electrotechnical Commission (IEC). Geneva: IEC, 2009.


DETERMINATION OF CONTENT - OPACITY SPRING Singapore

SS 5-E2 2003 Methods of test for paints, varnishes and related materials - P.E2: Determination of contrast ratio (opacity) of light-colour paints at a fixed spreading rate /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.


DOORS BSI

BS EN 13126-1 2006 Building hardware - Requirements and test methods for windows and doors height windows - P. 1: Requirements common to all types of hardware /By British Standards Institution (BSI). London: BSI, 2006.

DRY-HEAT TESTS SPRING Singapore

SS 5-D2 2003 Methods of test for paints, varnishes and related materials - P.D2: Surface-drying test (Ballotini method) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-D5 2003 Methods of test for paints, varnishes and related materials - P.D5: Determination of through-dry state and through-dry time /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

EARPHONES IEC

IEC 60318-1 2009 Electroacoustics - Simulators of human head and ear - P. 1: Ear simulator for the measurement of supra-aural and circumaural earphones /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2009.

EARTH-MOVING EQUIPMENT ISO

ISO 5010 2007 Earth-moving machinery - Rubber-tyred machines - Steering requirements /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2007.

EARTHING SWITCHES SAA



ELECTRIC BALLASTS BSI BS EN 61347-2-7 2006 Lamp controlgear - P. 2-7: Particular requirements for d.c. supplied

electronic ballasts for emergency lighting /By British Standards Institution (BSI). London: BSI, 2006.

ELECTRIC CABLES BSI BS 8434-1 2003 Methods of test for assessment of the fire integrity of electric cables - P. 1:

Test for unprotected small cables for use in emergency circuits - BS EN 50200 with addition of water spray /By British Standards Institution (BSI). London: BSI, 2003.

ELECTRIC CONTROL EQUIPMENT BSI BS EN 61326-2-2 2006 Electrical equipment for measurement, control and laboratory use -

EMC requirements - P.2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems /By British Standards Institution (BSI). London: BSI, 2006.

ELECTRIC SOCKETS - PORTABLE SPRING Singapore

SS 488 2001 Portable 2-pin socket-outlets of class II equipment for household and similar purposes /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2001.

ELECTRICAL ACCESSORIES BSI BS 4662 2006 Boxes for flush mounting of electrical accessories - Requirements, test

methods and dimensions /By British Standards Institution (BSI). London: BSI, 2006.

ELECTRICAL ENGINEERING IEC IEC 81346-1 2009 Industrial systems, installations and equipment and industrial products -

Structuring principles and reference designations - P. 1: Basic rules /By International Electrotechnical Commission (IEC). Geneva: IEC, 2009.



ELECTRICAL EQUIPMENT BSI

BS EN 60079-0 2009 Explosive atmospheres - P. 0: Equipment - General requirements /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 61241-0 2006 Electrical apparatus for use in the presence of combustible dust - P. 0: General requirements /By British Standards Institution (BSI). London: BSI, 2006.

BS EN 61241-1 2004 Electrical apparatus for use in the presence of combustible dust - P. 1: Protection by enclosures "tD" /By British Standards Institution (BSI). London: BSI, 2007.

IEC

IEC 60079-15 2010 Explosive atmospheres - P. 15: Equipment protection by type of protection "n" /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2010.

SAA

AS/NZS 3100 2009 Approval and test specification - General requirements for electrical equipment /By Standards Australia (SAA). 3rd ed. New South Wales: SAA, 2009.

SPRING Singapore

SS 538 2008 Code of practice for maintenance of electrical equipment of electrical installations /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2008.

ELECTRICAL HOUSEHOLD APPLIANCES BSI

BS EN 55014-1 2006 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - P.1: Emission /By British Standards Institution (BSI). London: BSI, 2006.


BS EN 55014-2 1997 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - P. 2: Immunity - Product family standard /By British Standards Institution (BSI). London: BSI, 2008.

BS EN 60320-1 2001 Appliance couplers for household and similar general purposes - P. 1: General requirements /By British Standards Institution (BSI). London: BSI, 2007.

BS EN 60335-2-40 2003 Household and similar electrical appliances - Safety - P. 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 62233 2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure /By British Standards Institution (BSI). London: BSI, 2008.

IEC IEC 60335-2-73 2006 Household and similar electrical appliances - Safety - P.2-73: Particular

requirements for fixed immersion heaters /By International Electrotechnical Commission (IEC). Geneva: IEC, 2006.

IEC 60335-2-74 2002 Household and similar electrical appliances - Safety - P.2-74: Particular requirements for portable immersion heaters /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2006.

IEC 60364-5-56 2009 Low-voltage electrical installations - P. 5-56: Selection and erection of electrical equipment - Safety services /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2009.

IEC 60704-2-2 2009 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - P. 2-2: Particular requirements for fan heaters /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2009.

SAA AS/NZS 62301 2005 Household electrical appliances - Measurement of standby power /By

Standards Australia (SAA). New South Wales: SAA, 2005.

ELECTRICAL INSTALLATIONS SAA

AS/NZS 3001 2008 Electrical installations - Transportable structures and vehicles including their site supplies /By Standards Australia (SAA). New South Wales: SAA, 2008.


SPRING Singapore

CP 88-3 2004 Code of practice for temporary electrical installations - P.3: Shipbuilding and ship-repairing yards /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2004.

SS 538 2008 Code of practice for maintenance of electrical equipment of electrical installations /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2008.

ELECTRICAL MEASUREMENT SPRING Singapore

CP 97-1 2002 Code of practice for construction electronic measurement standards (CEMS) - P.1: Standard method of measurement (SMM) for building works /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2002.

ELECTRICAL MEASURING INSTRUMENT BSI

BS EN 61326-2-2 2006 Electrical equipment for measurement, control and laboratory use - EMC requirements - P.2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems /By British Standards Institution (BSI). London: BSI, 2006.

ELECTRICAL SAFETY SAA

AS 60529 2004 Degrees of protection provided by enclosures (IP Code) /By Standards Australia (SAA). New South Wales: SAA, 2004.

AS/NZS 4761.1 2008 Competencies for working with electrical equipment for hazardous areas (EEHA) - P. 1: Competency standards /By Standards Australia (SAA). New South Wales: SAA, 2008.

AS/NZS 4761.2 2008 Competencies for working with electrical equipment for hazardous areas (EEHA) - P. 2: Guide to assessing competency /By Standards Australia (SAA). New South Wales: SAA, 2008.


ELECTRICALLY-INSULATED BUSHINGS SAA

AS/NZS 60137 2008 Insulated bushings for alternating voltages above 1000 V /By Standards Australia (SAA). New South Wales: SAA, 2008.

ELECTRODES AWS


ELECTROMAGNETIC COMPATIBILITY (EMC) BSI


BS EN 55014-2 1997 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - P. 2: Immunity - Product family standard /By British Standards Institution (BSI). London: BSI, 2008.

ELECTROMAGNETIC FIELDS BSI

BS EN 62233 2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure /By British Standards Institution (BSI). London: BSI, 2008.

EMERGENCY LIGHTING BSI

BS EN 61347-2-7 2006 Lamp controlgear - P. 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting /By British Standards Institution (BSI). London: BSI, 2006.


EMERGENCY VEHICLES BSI

BS EN 1789 2007 Medical vehicles and their equipment - Road ambulances /By British Standards Institution (BSI). London: BSI, 2007.

EMISSION BSI


ENVIRONMENTAL TESTING IEC

IEC 60068-2-2 2007 Environmental testing - P. 2-2: Tests - Test B: Dry heat /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2007.

ERGONOMICS ISO ISO/TR 22411 2008 Ergonomics data and guidelines for the application of ISO/IEC Guide 71

to products and services to address the needs of older persons and persons with disabilities /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ESCALATORS SPRING Singapore CP 15 2004 Code of practice for installation, operation and maintenance of escalators and

passenger conveyors /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2004.

ETHANOL BSI BS EN 15489 2007 Ethanol as a blending component for petrol - Determination of water

content - Karl Fischer coloumetric titration method /By British Standards Institution (BSI). London: BSI, 2007.


BS EN 15691 2009 Ethanol as a blending component for petrol - Determination of total dry residue (involatile material) - Gravimetric method /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 15721 2009 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and volatile impurities - Gas chromatographic method /By British Standards Institution (BSI). London: BSI, 2009.

EXHIBITION MANAGEMENT SERVICES SPRING Singapore

SS 539 2008 Guidelines for safety and operational management for indoor exhibitions /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2008.

EXPLOSIVE ATMOSPHERES IEC

IEC 60079-15 2010 Explosive atmospheres - P. 15: Equipment protection by type of protection "n" /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2010.

IEC 60079-20-1 2010 Explosive atmospheres - P. 20-1: Material characteristics for gas and vapour classification - Test methods and data /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

EYE PROTECTORS SAA

AS/NZS 1337.6 2007 Personal eye protection - P. 6: Prescription eye protectors against low and medium impact /By Standards Australia (SAA). New South Wales: SAA, 2008.

FENCES BSI

BS 1722-2 2006 Fences - P. 2: Specification for strained wire and wire mesh netting fences /By British Standards Institution (BSI). London: BSI, 2006.


FILLER METAL - ALLOYS AWS

AWS A5.02/A5.02M 2007 Filler metal standard sizes, packaging, and physical attributes /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2007.

FILLERS AWS


FILLERS - PHYSICAL PROPERTIES OF MATERIALS AWS


FIRE ALARMS NFPA

NFPA 72 2007 National fire alarm and signaling code /By National Fire Protection Association (NFPA). Quincy: NFPA, 2007.

FIRE DETECTORS BSI

BS 5839-1 2002 Fire detection and fire alarm systems for buildings - P. 1: Code of practice for system design, installation, commissioning and maintenance /By British Standards Institution (BSI). London: BSI, 2008.

FIRE DOORS PRING Singapore

SS 332 2007 Fire doors /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: PRING Singapore, 2007.


FIRE PROTECTION BSI

BS 7346-5 2005 Components for smoke and heat control systems - P. 5: Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing time-dependent design fires - Code of practice /By British Standards Institution (BSI). London: BSI, 2005.

BS 7346-6 2005 Components for smoke and heat control systems - P. 6: Specifications for cable systems /By British Standards Institution (BSI). London: BSI, 2005.

BS 7346-7 2006 Components for smoke and heat control systems - P. 7: Code of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car parks /By British Standards Institution (BSI). London: BSI, 2006.

FIRE SAFETY BSI




FIRE TESTS SAA

AS 1530.4 2005 Methods for fire tests on building materials, components and structures - P. 4: Fire-resistance test of elements of construction /By Standards Australia (SAA). 5th ed. New South Wales: SAA, 2005.


FLEXIBLE CABLES SPRING Singapore

SS 358-5 2005 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - P. 5: Flexible cables (cords) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2005.

FLUORESCENT LAMPS JSA

JIS C 8324 1979 Lampholders and starterholders for fluorescent lamps /By Japanese Standards Association (JSA). Tokyo: JSA, 1979.

FLUXES AWS




FOOD PRODUCTS BSI

BS EN 12821 2009 Foodstuffs - Determination of vitamin D by high performance liquid chromatography - Measurement of cholecalciferol (D3) or ergocalciferol (D2) /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 15607 2009 Foodstuffs - Determination of d-biotin by HPLC /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 15652 2009 Foodstuffs - Determination of niacin by HPLC /By British Standards Institution (BSI). London: BSI, 2009.


ISO

ISO/TS 10272-3 2010 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - P. 3: Semi-quantitative method /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

FOOD TESTING BSI

BS EN 14166 2009 Foodstuffs - Determination of vitamin B6 by microbiological assay /By British Standards Institution (BSI). London: BSI, 2009.

FORK TRUCKS SPRING Singapore

CP 101 2004 Code of practice for safe use of powered counterbalanced forklifts /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore; SPRING Singapore, 2004.

FUEL OIL AWS


FUELS BSI

BS EN 15489 2007 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method /By British Standards Institution (BSI). London: BSI, 2007.




FUME CUPBOARDS BSI BS EN 14175-1 2003 Fume cupboards - P. 1: Vocabulary /By British Standards Institution

(BSI). London: BSI, 2003. BS EN 14175-2 2003 Fume cupboards - P. 2: Safety and performance requirements /By

British Standards Institution (BSI). London: BSI, 2007. BS EN 14175-3 2003 Fume cupboards - P. 3: Type test methods /By British Standards

Institution (BSI). London: BSI, 2003. BS EN 14175-4 2004 Fume cupboards - P. 4: On-site test methods /By British Standards

Institution (BSI). London: BSI, 2004. BS EN 14175-6 2006 Fume cupboards - P. 6: Variable air volume fume cupboards /By British

Standards Institution (BSI). London: BSI, 2006. DD CEN/TS 14175-5 2006 Fume cupboards - P. 5: Recommendations for installation and

maintenance /By British Standards Institution (BSI). London: BSI, 2006.

FUSES SAA

AS 60269.2.0 2005 Low-voltage fuses - P. 2.0: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) /By Standards Australia (SAA). New South Wales: SAA, 2005.

GAS CYLINDERS SAA

AS 2337.1 2004 Gas cylinder test stations - P. 1: General requirements, inspection and tests - Gas cylinders /By Standards Australia (SAA). New South Wales: SAA, 2004.

AS 2337.2 2004 Gas cylinder test stations - P. 2: LP Gas fuel vessels for automotive use /By Standards Australia (SAA). New South Wales: SAA, 2004.

SPRING Singapore

SS 152 2003 Identification of contents of industrial gas containers /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2003.


GAS PIPES SPRING Singapore

CP 51 2004 Code of practice for manufactured gas pipe installation /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2004.

GAS-WELDING EQUIPMENT AWS


GENERATING SETS SPRING Singapore

SS 535 2007 Code of practice for installation, operation, maintenance, performance and construction requirements of mains failure standby generating systems /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2007.

GLOSS (OF SURFACE) SPRING Singapore

SS 5-E1 2003 Methods of test for paints, varnishes and related materials -P. E1: Measurement of specular gloss of non-metallic paint films at 20°, 60°; and 85° /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

GLOVES

BSI

BS EN 455-2 2009 Medical gloves for single use - P. 2: Requirements and testing for physical properties /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 455-4 2009 Medical gloves for single use - P. 4: Requirements and testing for shelf life determination /By British Standards Institution (BSI). London: BSI, 2009.


GRAPHIC SYMBOLS ISO


ISO 15223-2 2010 Medical devices - Symbols to be used with medical device labels, labelling, and information to be supplied - P. 2: Symbol development, selection and validation /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

HAZARDOUS AREAS CLASSIFICATION (FOR ELECTRICAL EQUIPMENT) SAA

AS/NZS 4761.1 2008 Competencies for working with electrical equipment for hazardous areas (EEHA) - P. 1: Competency standards /By Standards Australia (SAA). New South Wales: SAA, 2008.

AS/NZS 4761.2 2008 Competencies for working with electrical equipment for hazardous areas (EEHA) - P. 2: Guide to assessing competency /By Standards Australia (SAA). New South Wales: SAA, 2008.

HEALTH AND SAFETY REQUIREMENTS PSB

SS 506-1 2009 Occupational safety and health (OSH) management systems - P. 1: Requirements /By Singapore Productivity and Standards Board (PSB). Science Park Drive: PSB, 2009.

SS 506-2 2009 Occupational safety and health (OSH) management systems - P. 2: Guidelines for the implementation of SS 506-1 2009 /By Singapore Productivity and Standards Board (PSB). Science Park Drive: PSB, 2009.


HEALTH SERVICES ISO

ISO/TR 11633-1 2009 Health informatics - Information security management for remote maintenance of medical devices and medical information systems - P. 1: Requirements and risk analysis /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

ISO/TR 11633-2 2009 Health informatics - Information security management for remote maintenance of medical devices and medical information systems - P. 2: Implementation of an information security management system (ISMS) /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

ISO/TR 11636 2009 Health informatics - Dynamic on-demand virtual private network for health information infrastructure /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

ISO 15882 2008 Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

HEAT PUMPS BSI

BS EN 60335-2-40 2003 Household and similar electrical appliances - Safety - P. 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers /By British Standards Institution (BSI). London: BSI, 2009.

DD CEN/TS 14825 2003 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Testing and rating at part load conditions /By British Standards Institution. London: BSI, 2003.

HELMETS (PROTECTIVE) PSB

SS 98 2005 Industrial safety helmets /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2005.


HIGH-VOLTAGE SAA

AS 62271.200 2005 High-voltage switchgear and controlgear - P. 200: A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV /By Standards Australia (SAA). New South Wales: SAA, 2005.

HIGH-VOLTAGE EQUIPMENT SAA


HIGH-VOLTAGE TESTS SAA

AS 60270 2001 High-voltage test techniques - Partial discharge measurements /By Standards Australia (SAA). New South Wales: SAA, 2001.

HOISTING SLINGS SPRING Singapore

SS 343-1 2001 Lifting gear - P.1: Wire rope slings /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2001.

HOSPITAL EQUIPMENT BSI BS EN 13795-1 2002 Surgical drapes, gowns and clean air suits, used as medical devices,

for patients, clinical staff and equipment - P. 1: General requirements for manufacturers, processors and products /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 13795-2 2004 Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - P. 2: Test methods /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 13795-3 2006 Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - P. 3: Performance requirements and performance levels /By British Standards Institution (BSI). London: BSI, 2009.


HOT-DIP COATING ISO ISO 1461 2009 Hot dip galvanized coatings on fabricated iron and steel articles -

Specifications and test methods /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.

HOT-DIP GALVANIZING

ISO ISO 1461 2009 Hot dip galvanized coatings on fabricated iron and steel articles -

Specifications and test methods /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.

SAA AS/NZS 4680 2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles /By


HOTELS

PSB SS 545 2009 Hotel security /By Singapore Productivity and Standards Board (PSB). Science

Park Drive: PSB, 2009.

HOUSING

PSB SS 547 2009 Code of practice for temporary housing quarters on construction sites /By

Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2009.

HULL COMPARTMENTS

AWS AWS D3.7 2004 Guide for aluminium hull welding /By American Welding Society (AWS) and

American National Standards Institute (ANSI). Miami: AWS, 2004.


HYDRAULIC EQUIPMENT BSI

BS EN 982 1996 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics /By British Standards Institution (BSI). London: BSI, 2009.

IDENTITY CARDS ISO

ISO/IEC 18013-3 2009 Information technology - Personal identification - ISO-compliant driving license P. 3: Access control, authentication and integrity validation /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

IMMERSION HEATERS IEC

IEC 60335-2-73 2006 Household and similar electrical appliances - Safety - P.2-73: Particular requirements for fixed immersion heaters /By International Electrotechnical Commission (IEC). Geneva: IEC, 2006.


INFORMATION ISO

ISO/TR 11636 2009 Health informatics - Dynamic on-demand virtual private network for health information infrastructure /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

INFORMATION SECURITY MANAGEMENT ISO

ISO/IEC 27003 2010 Information technology - Security techniques - Information security management system implementation guidance /By International Organization for Standardization (ISO). Geneva: ISO, 2010.


ISO/IEC 27004 2009 Information technology - Security techniques - Information security management - Measurement /By International Organization for Standardization (ISO). Geneva: ISO, 2009.



INFORMATION TECHNOLOGY ISO ISO/IEC 27003 2010 Information technology - Security techniques - Information security

management system implementation guidance /By International Organization for Standardization (ISO). Geneva: ISO, 2010.


ISO/IEC 38500 2008 Corporate governance of information technology /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

SPRING Singapore

SS 507 2008 Information and communications technology disaster recovery services /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2008.

INFRARED RADIATION BSI

BS EN 14078 2009 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method /By British Standards Institution (BSI). London: BSI, 2010.


INSTRUMENT TRANSFORMERS SAA

AS 60044.1 2007 Instrument transformers - P. 1: Current transformers /By Standards Australia (SAA). 2nd ed. New South Wales: SAA, 2007.

AS 60076.1 2005 Power transformers - P. 1: General /By Standards Australia (SAA). New South Wales: SAA, 2005.

AS/NZS 60076.10 2009 Power transformers - P. 10: Determination of sound levels /By Standards Australia (SAA). New South Wales: SAA, 2009.

AS/NZS 60076.3 2008 Power transformers - P. 3: Insulation levels, dielectric tests and external clearances in air /By Standards Australia (SAA). New South Wales: SAA, 2008.

INSULATED CABLES SPRING Singapore

SS 358-2 2005 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - P. 2: Test methods /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2005.


INTERIOR LIGHTING SPRING Singapore

SS 531-1 2006 Code of practice for lighting of work places - P.1: Indoor /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2006.

INTERLOCKS BSI

BS EN 1088 1995 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection /By British Standards Institution (BSI). London: BSI, 2009.


IRON ISO

ISO 1461 2009 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.

ISOLATOR SWITCHES SAA


ISOLATOR SYSTEM ISO

ISO 22762-1 2005 Elastomeric seismic-protection isolators - P. 1: Test methods /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

KNOWLEDGE MANAGEMENT SAA

HB 189 2004 Handbook - Knowledge management terminology and reading list - An Australian guide /By Standards Australia (SAA). New South Wales: SAA, 2004.

LABELS ISO


LAMPS IEC

IEC 61231 2010 International lamp coding system (ILCOS) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.


LENSES ISO

ISO 21987 2009 Ophthalmic optics - Mounted spectacle lenses /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

LIGHT ISO

ISO 80000-7 2008 Quantities and units - P. 7: Light /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

LIGHTING COLUMNS BSI

BS EN 40-2 2004 Lighting columns - P. 2: General requirements and dimensions /By British Standards Institution (BSI). London: BSI, 2004.

LIGHTING EQUIPMENT BSI

BS EN 55015 2006 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment /By British Standards Institution (BSI). London: BSI, 2007.

LIQUEFIED NATURAL GAS SAA

AS 3961 2005 The storage and handling of liquefied natural gas /By Standards Australia (SAA). New South Wales: SAA, 2005.

LIQUID CHROMATOGRAPHY BSI

BS EN 12821 2009 Foodstuffs - Determination of vitamin D by high performance liquid chromatography - Measurement of cholecalciferol (D3) or ergocalciferol (D2) /By British Standards Institution (BSI). London: BSI, 2009.


BS EN 15607 2009 Foodstuffs - Determination of d-biotin by HPLC /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 15652 2009 Foodstuffs - Determination of niacin by HPLC /By British Standards Institution (BSI). London: BSI, 2009.

LIQUID FUELS BSI


LOW-ALLOY STEELS AWS




MACHINERY AWS

AWS D14.4/D14.4M 2005 Welded joints in machinery and equipment /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2005.

MAGNETIC MATERIALS AWS



MAGNETIC MEASUREMENT AWS


MANAGEMENT TECHNIQUES BSI

PAS 99 2006 Common management system requirements as a framework for integration /By British Standards Institution (BSI). London: BSI, 2006.

IEC

IEC/ISO 31010 2009 Risk management - Risk assessment techniques /By International Electrotechnical Commission (IEC). Geneva: IEC, 2009.

ISO

IWA 4 2009 Quality management systems - Guidelines for the application of ISO 9001: 2008 in local government /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

MARKING BSI

BS EN 13986 2004 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking /By British Standards Institution (BSI). London: BSI, 2004.

MATERIALS HANDLING SAA

AS 2714 2008 The storage and handling of organic peroxides /By Standards Australia (SAA). 3rd ed. New South Wales: SAA, 2008.

AS 3780 2008 The storage and handling of corrosive substances /By Standards Australia (SAA). 2nd ed. New South Wales: SAA, 2009.


MATTRESSES BSI

BS 6807 2006 Methods of test for assessment of the ignitability of mattresses, upholsterde divans and upholstered bed bases with flaming types of primary and secondary sources of ignition /By British Standards Institution (BSI). London: BSI, 2006.

MEASURING INSTRUMENTS IEC

CISPR 16-1-1 2010 Radio disturbance and immunity measuring apparatus and methods - P. 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.

MEDICAL EQUIPMENT BSI

BS EN 455-2 2009 Medical gloves for single use - P. 2: Requirements and testing for physical properties /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 455-4 2009 Medical gloves for single use - P. 4: Requirements and testing for shelf life determination /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 868-10 2009 Packaging materials for terminally sterilized medical devices - P. 10: Adhesive coated nonwoven materials of polyolefines - Requirements and test methods /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 868-2 2009 Packaging materials for terminally sterilized medical devices - P. 2: Sterilization wrap - Requirements and test methods /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 868-3 2009 Packaging for terminally sterilized medical devices - P. 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 868-4 2009 Packaging materials for terminally sterilized medical devices - P. 4: Paper bags - Requirements and test methods /By British Standards Institution (BSI). London: BSI, 2009.


BS EN 868-5 2009 Packaging for terminally sterilized medical devices - P. 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 868-6 2009 Packaging materials for terminally sterilized medical devices - P. 6: Paper for low temperature sterilization processes - Requirements and test methods /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 868-7 2009 Packaging for terminally sterilized medical devices - P. 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 868-8 2009 Packaging materials for terminally sterilized medical devices - P. 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 868-9 2009 Packaging for terminally sterilized medical devices - P. 9: Uncoated nonwoven materials of polyolefin - Requirements and test methods /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 55011 2009 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement /By British Standards Institution (BSI). London: BSI, 2009.

ISO

ISO 1135-4 2010 Transfusion equipment for medical use - P. 4: Transfusion sets for single use /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2010. .


ISO 8836 2007 Suction catheters for use in the respiratory tract /By 11.040.25 and International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.

ISO 10993-7 2008 Biological evaluation of medical devices - P.7: Ethylene oxide sterilization residuals /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.


ISO/TS 11135-2 2008 Sterilization of health care products - Ethylene oxide - P.2: Guidance on the application of ISO 11135-1 /By International Organization for Standardization (ISO). Geneva: ISO, 2008.





ISO 81060-1 2007 Non-invasive sphygmomanometers - P. 1: Requirements and test methods for non-automated measurement type /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

ISO 81060-2 2009 Non-invasive sphygmomanometers - P. 2: Clinical validation of automated measurement type /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

METAL COATINGS SAA AS/NZS 4534 2006 Zinc and zinc/aluminium-alloy coatings on steel wire /By Standards

Australia (SAA). 2nd ed. New South Wales: SAA, 2006. AS/NZS 4680 2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles /By


METALS SAA

AS 1391 2007 Metallic materials - Tensile testing at ambient temperature /By Standards Australia. New South Wales: SAA, 2007.


AS 2314 2006 Radiography of metals - Image quality indicators (IQI) and recommendations for their use /By Standards Australia (SAA). New South Wales: SAA, 2006.

MICROBIOLOGICAL ANALYSIS ISO


MICROBIOLOGICAL SAFETY CABINETS BSI

BS 5726 2005 Microbiological safety cabinets - Information to be supplied by the purchaser to the vendor and to the installer, and sitting and use of cabinets - Recommendations and guidance /By British Standards Institution (BSI). London: BSI, 2005.

MICROBIOLOGY ISO


MILK ISO

ISO 3889 2006 Milk and milk products - Specification of Mojonnier-type fat extraction flasks /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

MILK PRODUCTS ISO

ISO 3889 2006 Milk and milk products - Specification of Mojonnier-type fat extraction flasks /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

ISO 27205 2010 Fermented milk products - Bacterial starter cultures - Standard of identity /By International Organization for Standardization (ISO). Geneva: ISO, 2010.


MOTOR CYCLES ISO

ISO 6460-1 2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - P. 1: General test requirements /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

ISO 6460-2 2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - P. 2: Test cycles and specific test conditions /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

ISO 6460-3 2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - P. 3: Fuel consumption measurement at a constant speed /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

NATURAL GAS ISO

ISO 23251 2006 Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

NICKEL ALLOYS AWS

AWS A5.14/A5.14M 2009 Nickel and nickel-alloy bare welding electrodes and rods /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2009.

NON-DESTRUCTIVE TESTING ISO

ISO 3452-1 2008 Non-destructive testing - Penetrant testing - P. 1: General principles /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ISO 3452-2 2006 Non-destructive testing - Penetrant testing - P. 2: Testing of penetrant materials /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

ISO 3452-5 2008 Non-destructive testing - Penetrant testing - P. 5: Penetrant testing at temperatures higher than 50°C /By International Organization for Standardization (ISO). Geneva: ISO, 2009.


ISO 7963 2006 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

SAA

AS 1929 2009 Non-destructive testing - Glossary of terms /By Standards Australia (SAA). New South Wales: SAA, 2009.

AS 3669 2006 Non-destructive testing - Qualification and approval of personnal - Aerospace /By Standards Australia (SAA). New South Wales: SAA, 2006.

AS 4749 2007 Non-destructive testing - Terminology of and abbreviations for fusion weld imperfections as revealed by radiography /By Standards Australia (SAA). 2nd ed. New South Wales: SAA, 2007.

NON-VOLATILE MATTER DETERMINATION ISO

ISO 3251 2008 Paints, varnishes and plastics - Determination of non-volatile-matter content /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2008.

SPRING Singapore

SS 5-B2 2003 Methods of test for paints, varnishes and related materials - P.B2: Determination of non-volatile matter /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

NON-WOVEN CLOTH ISO

ISO 9073-17 2008 Textiles - Test methods for nonwovens - P. 17: Determination of water penetration (spray impact) /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

NUCLEAR PHYSICS ISO



NUMBERS ISO ISO 80000-11 2008 Quantities and units - P. 11: Characteristic numbers /By International

Organization for Standardization (ISO). Geneva: ISO, 2008.

OCCUPATIONAL SAFETY BSI

BS 18004 2008 Guide to achieving effective occupational health and safety performance /By British Standards Institution (BSI). London: BSI, 2008.

PSB SS 506-1 2009 Occupational safety and health (OSH) management systems - P. 1:

Requirements /By Singapore Productivity and Standards Board (PSB). Science Park Drive: PSB, 2009. SS 506-2 2009 Occupational safety and health (OSH) management systems - P. 2:

Guidelines for the implementation of SS 506-1 2009 /By Singapore Productivity and Standards Board (PSB). Science Park Drive: PSB, 2009.

OPHTHALMIC EQUIPMENT ISO ISO 21987 2009 Ophthalmic optics - Mounted spectacle lenses /By International Organization

for Standardization (ISO). Geneva: ISO, 2009.

OUTDOOR SPORTS EQUIPMENT SPRING Singapore

SS 534 2007 Outdoor fitness equipment for public use /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2007.

PACKAGES IEC

IEC 60191-6-18 2010 Mechanical standardization of semiconductor devices - P. 6-18: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for ball grid array (BGA) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.


PACKAGING - DIMENSIONS AWS


PACKAGING MATERIALS BSI BS EN 868-2 2009 Packaging materials for terminally sterilized medical devices - P. 2:

Sterilization wrap - Requirements and test methods /By British Standards Institution (BSI). London: BSI, 2009.









BS EN 868-10 2009 Packaging materials for terminally sterilized medical devices - P. 10: Adhesive coated nonwoven materials of polyolefin - Requirements and test methods /By British Standards Institution (BSI). London: BSI, 2009.

PAINTS BSI

BS EN 13438 2005 Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes /By British Standards Institution (BSI). London: BSI, 2005.

ISO


SPRING Singapore

SS 5-A1 2003 Methods of test for paints, varnishes and related materials - P.A1: Sampling /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-A2 2003 Methods of test for paints, varnishes and related materials - P.A2: Examination and preparation of samples for testing /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-A3 2003 Methods of test for paints, varnishes and related materials - P.A3: Standard panels for testing /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-A4 2003 Methods of test for paints, varnishes and related materials - P.A4: Temperature and humidities for conditioning and testing /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-B1 2003 Methods of test for paints, varnishes and related materials - P.B1: Determination of film thickness /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.


SS 5-B10 2003 Methods of test for paints, varnishes and related materials - P.B10: Spraying properties /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-B11 2003 Methods of test for paints, varnishes and related materials - P.B11: Determination of viscosity by Ford viscosity cup /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-B12 2003 Methods of test for paints, varnishes and related materials - P.B12: Consistency of paints using the stormer viscometer /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-B13 2003 Methods of test for paints, varnishes and related materials - P.B13: fineness of grind /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.


SS 5-B4 2003 Methods of test for paints, varnishes and related materials - P.B4: Condition in container /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-B5 2003 Methods of test for paints, varnishes and related materials - P.B5: Skinning (partially filled container) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-B7 2003 Methods of test for paints, varnishes and related materials - P.B7: Density /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.


SS 5-D1 2003 Methods of test for paints, varnishes and related materials - P.D1: Wet edge time /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.




SS 5-E1 2003 Methods of test for paints, varnishes and related materials -P. E1: Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-E2 2003 Methods of test for paints, varnishes and related materials - P.E2: Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-E3 2003 Methods of test for paints, varnishes and related materials - P.E3: Visual comparison of the colour of paints /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-F1 2003 Methods of test for paints, varnishes and related materials - P.F1: Bend test (cylindrical mandrel) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-F2 2003 Methods of test for paints, varnishes and related materials - P.F2: Scratch test /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-F3 2003 Methods of test for paints, varnishes and related materials - P. F3: Abrasion resistance (Taber abrader) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-G1 2003 Methods of test for paints, varnishes and related materials - P.G1: Determination of resistance to continuous neutral salt spray /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.


SS 5-G2 2003 Methods of test for paints, varnishes and related materials - P.G2: Alkali resistance (spotting method) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-G3 2003 Methods of test for paints, varnishes and related materials - P.G3: Colour fastness to light (Xenon arc) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-G4 2003 Methods of test for paints, varnishes and related materials - P.G4: Accelerated weathering (Xenon arc) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-G6 2003 Methods of test for paints, varnishes and related materials - P.G6: Resistance to humidity under condensation condition /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-H6 2003 Methods of test for paints, varnishes and related materials - P. H6: Evaluating degree of bleeding of road marking paint /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-H7 2003 Methods of test for paints, varnishes and related materials - P. H7: Rating of degree of chalking by tape method /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SS 5-0 2003 Methods of test for paints, varnishes and related materials - P.0: General introduction /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2003.

PAPER ISO


PAPER PULP ISO



PARTICLE BOARDS SAA

AS/NZS 1859.1 2004 Reconstituted wood-based panels - Specifications - P. 1: Particleboard /By Standards Australia (SAA). New South Wales: SAA, 2006.

PASSENGER CONVEYORS SPRING Singapore

CP 15 2004 Code of practice for installation, operation and maintenance of escalators and passenger conveyors /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2004.

PEDESTRIAN ROADS SPRING Singapore

SS 485 2001 Slip resistance classification of public pedestrian surface materials /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2001.

PENETRATION TESTS ISO

ISO 3452-1 2008 Non-destructive testing - Penetrant testing - P. 1: General principles /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ISO 3452-2 2006 Non-destructive testing - Penetrant testing - P. 2: Testing of penetrant materials /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

ISO 3452-5 2008 Non-destructive testing - Penetrant testing - P. 5: Penetrant testing at temperatures higher than 50°C /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

PERFORMANCE IEC

IEC 60034-1 2010 Rotating electrical machines - P. 1: Rating and performance /By International Electrotechnical Commission (IEC). 12th ed. Geneva: IEC, 2010.


SAA

AS 4594.0 1999 Internal combustion engines - Performance - P. 0: Application /By Standards Australia (SAA). New South Wales: SAA, 1999.

PERFORMANCE EVALUATION AWS

AWS B2.1/B2.1M 2009 Welding procedure and performance qualification /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2009.

PERFORMANCE STANDARDS AWS

AWS B2.3/B2.3M 2008 Soldering procedure and performance qualification /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2008.

PERSONAL IDENTIFICATION ISO

ISO/IEC 18013-1 2005 Information technology - Personal identification - ISO-compliant driving license - P. 1: Physical characteristics and basic data set /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO/IEC 18013-2 2008 Information technology - Personal identification - ISO-compliant driving license P. 2: Machine-readable technologies /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ISO/IEC 18013-3 2009 Information technology - Personal identification - ISO-compliant driving license P. 3: Access control, authentication and integrity validation /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

PETROLEUM ISO

ISO 23251 2006 Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems /By International Organization for Standardization (ISO). Geneva: ISO, 2006.


PETROLEUM PRODUCTS BSI

BS EN 14331 2004 Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates - Liquid chromatography (LC)/gas chromatography (GC) method /By British Standards Institution (BSI). London: BSI, 2004.

BS EN 15489 2007 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer colormetric titration method /By British Standards Institution (BSI). London: BSI, 2007.



PHYSICAL CHEMISTRY ISO


PHYSICAL PROPERTIES OF MATERIALS AWS


PIPES - GAS SUPPLY SPRING Singapore

CP 51 2004 Code of practice for manufactured gas pipe installation /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2004.


PIPES - PLASTICS BSI

DD CEN/TS 1852-2 2009 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - P. 2: Guidance for the assessment of conformity /By British Standards Institution (BSI). London: BSI, 2009.

PIPES - POLYPROPYLENE BSI DD CEN/TS 1852-2 2009 Plastics piping systems for non-pressure underground drainage and

sewerage - Polypropylene (PP) - P. 2: Guidance for the assessment of conformity /By British Standards Institution (BSI). London: BSI, 2009.

PIPEWORK SYSTEMS BSI DD CEN/TS 1852-2 2009 Plastics piping systems for non-pressure underground drainage and

sewerage - Polypropylene (PP) - P. 2: Guidance for the assessment of conformity /By British Standards Institution (BSI). London: BSI, 2009.

PLASTICS ISO ISO 291 2008 Plastics - Standard atmospheres for conditioning and testing /By International

Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2008. ISO 527-5 2009 Plastics - Determination of tensile properties - P. 5: Test conditions for

unidirectional fibre-reinforced plastic composites /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.


PLASTICS PRODUCTS ISO ISO 3826-2 2008 Plastics collapsible containers for human blood and blood components -

P. 2: Graphical symbols for use on labels and instruction leaflets /By International Organization for Standardization (ISO). Geneva: ISO, 2008.


PLAYGROUND EQUIPMENT SPRING Singapore

SS 457 2007 Playground equipment for public use /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2007.

PLUG ADAPTORS SPRING Singapore

SS 246 2004 Fused and unfused adaptors /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2004.

POLYVINYL CHLORIDE SPRING Singapore SS 358-2 2005 Polyvinyl chloride insulated cables of rated voltages up to and including

450/750 V - P. 2: Test methods /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2005.


POWER TRANSFORMERS IEC IEC/TS 60076-14 2009 Power transformers - P. 14: Design and application of liquid-

immersed power transformers using high-temperature insulation materials /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2009.

PRESSURES PIPES SAA

AS/NZS 4131 2010 Polyethylene (PE) compounds for pressure pipes and fittings /By International Organization for Standardization (ISO). New South Wales: SAA, 2010.


PRIMERS (PAINT) - IRON SPRING Singapore

SS 494 2001 Lead and chromate-free primer for iron and steel substrates /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2001.

PRIMERS (PAINT) - STEELS SPRING Singapore

SS 494 2001 Lead and chromate-free primer for iron and steel substrates /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2001.

PROFICIENCY TESTING ISO

ISO/IEC 17043 2010 Conformity assessment - General requirements for proficiency testing /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

PROTECTIVE COATINGS SAA AS 3894.2 2002 Site testing of protective coatings - M. 2: Non-conductive coatings -

Continuity testing - Wet sponge method /By Standards Australia (SAA). New South Wales: SAA, 2002.


PROTECTIVE EQUIPMENT PSB

SS 549 2009 Code of practice for selection, use, care and maintenance of hearing protectors /By Singapore Productivity and Standards Board (PSB). Science Park Drive: PSB, 2009.

QUALIFICATION APPROVAL AWS



AWS B2.1/B2.1M-BMG 2009 Base metal grouping for welding procedure and performance qualification /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2009.

AWS/SENSE QC10 2008 Qualification and certification of level I - Entry welder /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2008.

QUALITY ASSURANCE AWS



QUALITY - MANAGEMENT TECHNIQUES ISO

IWA 4 2009 Quality management systems - Guidelines for the application of ISO 9001: 2008 in local government /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

SAA

HB 90.2 2000 The service industry handbook guide to ISO 9001 : 2000 - The competency approach to implementing management systems /By Standards Australia (SAA). New South Wales: SAA, 2000.

QUANTITY ISO

ISO 80000-1 2009 Quantities and units - P. 1: General /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

ISO 80000-2 2009 Quantities and units - P. 2: Mathematical signs and symbols to be used in the natural sciences and technology /By International Organization for Standardization (ISO). Geneva: ISO, 2009.


ISO 80000-7 2008 Quantities and units - P. 7: Light /By International Organization for Standardization (ISO). Geneva: ISO, 2008.



ISO 80000-11 2008 Quantities and units - P. 11: Characteristic numbers /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

ISO 80000-12 2009 Quantities and units - P. 12: Solid state physics /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

RADIO DISTURBANCES BSI BS EN 55011 2009 Industrial, scientific and medical equipment - Radio-frequency disturbance

characteristics - Limits and methods of measurement /By British Standards Institution (BSI). London: BSI, 2009.

BS EN 55015 2006 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment /By British Standards Institution (BSI). London: BSI, 2007.

IEC

CISPR 16-1-1 2010 Radio disturbance and immunity measuring apparatus and methods - P. 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.

RATINGS IEC

IEC 60034-1 2010 Rotating electrical machines - P. 1: Rating and performance /By International Electrotechnical Commission (IEC). 12th ed. Geneva: IEC, 2010.

RECORDING SYSTEMS IEC

IEC 62546 2009 High Definition (HD) recording link guidelines /By International Electrotechnical Commission (IEC). Geneva: IEC, 2009.


REINFORCING MATERIALS AWS

AWS D1.4/D1.4M 2005 Structural Welding Code - Reinforcing Steel /By American Welding Society (AWS) and American National Standards Institute (ANSI). 6th ed. Miami: AWS, 2005.

REINFORCING STEELS AWS


RESISTANCE WELDING ISO

ISO 5182 2008 Resistance welding - Materials for electrodes and ancillary equipment /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.

RISK MANAGEMENT AWS AWS D16.3M/D16.3 2009 Risk Assessment Guide for Robotic Arc Welding /By American

Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2009. ISO ISO/TR 11633-1 2009 Health informatics - Information security management for remote

maintenance of medical devices and medical information systems - P. 1: Requirements and risk analysis /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

SAA

HB 141 2004 Risk financing guidelines /By Standards Australia (SAA). New South Wales: SAA, 2004.

ROAD MARKING BSI

BS EN 1436 2007 Road marking materials - Road marking performance for road users /By British Standards Institution (BSI). London: BSI, 2008.


SAA

AS 4049.4 2006 Paints and related materials - Pavement marking materials - P. 4: High performance pavement marking systems /By Standards Australia (SAA). New South Wales: SAA, 2006.

ROAD SURFACING SPRING Singapore

SS 485 2001 Slip resistance classification of public pedestrian surface materials /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2001.

ROOF COVERINGS SPRING Singapore

CP 89 2001 Code of practice for metal roofing /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2001.

ROOFING TILES SPRING Singapore

SS 70 2001 Clay roofing tiles and fittings /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2001.

ROTARY FLEXOMETER ISO

ISO 4666-2 2008 Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - P. 2: Rotary flexometer /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

SAFETY BELTS PSB

SS 541 2008 Pestraint belts /By Singapore Productivity and Standards Board (PSB). Science Park Drive: PSB, 2008.


SAFETY MEASURES BSI

BS EN 50272-4 2007 Safety requirements for secondary batteries and battery installations - P. 4: Batteries for use in portable appliances /By British Standards Institution (BSI). London: BSI, 2007.

IEC


SPRING Singapore

SS 337 2001 Safety of information technology equipment /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2001.

SS 146-2-8 2007 Household and similar electrical appliances - Safety - P.2-8: Particular requirements for storage water heaters /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2007.

SS 510 2005 Code of practice for safety in welding and cutting (and other operations involving the use of heat) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2005.

SALT-SPRAY TESTS SPRING Singapore

SS 5-G1 2003 Methods of test for paints, varnishes and related materials - P.G1: Determination of resistance to continuous neutral salt spray /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SAMPLING METHODS SPRING Singapore



SANITARY ENGINEERING AWS

AWS D18.3/D18.3M 2005 Welding of tanks, vessels, and other equipment in sanitary (hygienic) applications /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2005.

SCAFFOLDING SPRING Singapore

SS 311 2005 Steel tubes and fittings used in tubular scaffolding /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2005.

SCRATCH TESTS SPRING Singapore

SS 5-F2 2003 Methods of test for paints, varnishes and related materials - P.F2: Scratch test /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SCAFFOLDS - METALS PSB

SS 280-2 2009 Metal scaffoldings P. 2: Modular scaffoldings /By Singapore Productivity and Standards Board (PSB). Science park Drive: PSB, 2009.

SECURITY TECHNIQUES ISO

ISO/IEC 27003 2010 Information technology - Security techniques - Information security management system implementation guidance /By International Organization for Standardization (ISO). Geneva: ISO, 2010.



SPRING Singapore

SS 507 2008 Information and communications technology disaster recovery services /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2008.

SEISMIC AREAS AWS

AWS D1.8/D1.8M 2005 Structural welding code - Seismic supplement /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2005.

SEMICONDUCTOR DEVICES IEC

IEC 60191-6-18 2010 Mechanical standardization of semiconductor devices - P. 6-18: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for ball grid array (BGA) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

SHEET MATERIALS AWS

AWS D1.3/D1.3M 2008 Structural Welding Code - Sheet Steel /By American Welding Society (AWS) and American National Standards Institute (ANSI). 5th ed. Miami: AWS, 2008.

SIGNS SPRING Singapore

SS 508-1 2004 Graphical symbols - Safety colours and safety signs - P.1: Design principles for safety signs in workplaces and public areas /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2004.

SS 508-3 2004 Graphical symbols - Safety colours and safety signs - P.3: Safety signs used in workplaces and public areas /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2004.


SMOKE CONTROL BSI

BS 7346-4 2003 Components for smoke and heat control systems - P. 4: Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing steady-state design fires - Code of practice /By British Standards Institution (BSI). London: BSI, 2003.




SOCKET ADAPTORS SPRING Singapore

SS 246 2004 Fused and unfused adaptors /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2004.

SOLDERING AWS


SOLDERING EQUIPMENT AWS



SOLID-STATE PHYSICS ISO


SPECIMEN PREPARATION SPRING Singapore


SPECTACLE LENSES ISO


SPECTROSCOPY BSI


SPHYGMOMANOMETERS BSI

BS EN 1060-4 2004 Non - invasive sphygmomanometers - P. 4: Test procedures to determine the overall system accuracy of automated non-invasive sphygmomanometers /By British Standards Institution (BSI). London: BSI, 2004.

ISO

ISO 81060-1 2007 Non-invasive sphygmomanometers - P. 1: Requirements and test methods for non-automated measurement type /By International Organization for Standardization (ISO). Geneva: ISO, 2007.


ISO 81060-2 2009 Non-invasive sphygmomanometers - P. 2: Clinical validation of automated measurement type /By International Organization for Standardization (ISO). Geneva: ISO, 2009.

SPORTS EQUIPMENT SPRING Singapore

SS 534 2007 Outdoor fitness equipment for public use /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2007.

SPRAYING (COATING) SPRING Singapore SS 5-B10 2003 Methods of test for paints, varnishes and related materials - P.B10: Spraying

properties /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

SPRINKLER SYSTEMS NFPA NFPA 13 2007 Installation of sprinkler systems /By National Fire Protection Association

(NFPA). Quincy: NFPA, 2007.

SPRINKLERS NFPA NFPA 13 2007 Installation of sprinkler systems /By National Fire Protection Association

(NFPA). Quincy: NFPA, 2007.

STEEL PIPES SPRING Singapore SS 311 2005 Steel tubes and fittings used in tubular scaffolding /By Singapore, Productivity

and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2005.

STEEL-WIRE ROPES BSI BS EN 13414-2 2003 Steel wire rope slings - Safety - P. 2: Specification for information for

use and maintenance to be provided by the manufacturer /By British Standards Institution (BSI). London: BSI, 2003.


BS EN 13414-3 2003 Steel wire rope slings - Safety - P. 3: Grommets and cable-laid slings /By British Standards Institution (BSI). London: BSI, 2003.

SAA

AS 3569 2010 Steel wire ropes - Product specification /By Standards Australia (SAA). 2nd ed. New South Wales: SAA, 2010.

STEELS BSI

BS EN 3476 2006 Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Softened - Forging stock - a or D ≤ 300 mm /By British Standards Institution (BSI). London: BSI, 2006.

ISO

ISO 1461 2009 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.

STERILIZATION (HYGIENE) BSI

BS EN 868-2 2009 Packaging materials for terminally sterilized medical devices - P. 2: Sterilization wrap - Requirements and test methods /By British Standards Institution (BSI). London: BSI, 2009.









BS EN 868-10 2009 Packaging materials for terminally sterilized medical devices - P. 10: Adhesive coated nonwoven materials of polyolefin - Requirements and test methods /By British Standards Institution (BSI). London: BSI, 2009.

ISO

ISO/TS 11135-2 2008 Sterilization of health care products - Ethylene oxide - P.2: Guidance on the application of ISO 11135-1 /By International Organization for Standardization (ISO). Geneva: ISO, 2008.

STORAGE SPRING Singapore

SS 532 2007 Code of practice for the storage of flammable liquids /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2007.

STORAGE BATTERIES BSI

BS EN 50272-4 2007 Safety requirements for secondary batteries and battery installations - P. 4: Batteries for use in portable appliances /By British Standards Institution (BSI). London: BSI, 2007.


STORAGE WATER HEATERS Spring Singapore

SS 146-2-8 2007 Household and similar electrical appliances - Safety - P.2-8: Particular requirements for storage water heaters /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2007.

STRUCTURAL STEELS - CODES AWS

AWS D1.1/D1.1M 2008 Structural Welding Code - Steel /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2008.


AWS D1.9/D1.9M 2007 Structural Welding Code - Titanium /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2007.

SUBMERGED ARC WELDING AWS


SUCTION APPARATUS (MEDICAL)

ISO

ISO 8836 2007 Suction catheters for use in the respiratory tract /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.

SULPHURIC ACID

SS 130 2001 Sulphuric acid /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2001.


SYMBOLS

SPRING Singapore

SS 362-1 2004 EAN bar coding system - P. 1: EAN -An unambiguous international product identification system /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2004.

SS 362-2 2004 EAN bar coding system - P. 2: EAN code 128 and application identifier standard /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2004.

TANK (CONTAINERS)

AWS


BSI

BS EN 14620-1 2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between O° C and - 165° C - P. 1: General /By British Standards Institution (BSI). London: BSI, 2006.

BS EN 14620-2 2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between O° C and - 165° C - P. 2: Metallic components /By British Standards Institution (BSI). London: BSI, 2006.

BS EN 14620-3 2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between O° C and - 165° C - P. 3: Concrete components /By British Standards Institution (BSI). London: BSI, 2006.

BS EN 14620-4 2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between O° C and - 165° C - P. 4: Insulation components /By British Standards Institution (BSI). London: BSI, 2006.


BS EN 14620-5 2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between O° C and - 165° C - P. 5: Testing, drying, purging and cool-down /By British Standards Institution (BSI). London: BSI, 2006.

TECHNICAL DOCUMENTS IEC

IEC 81346-1 2009 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - P. 1: Basic rules /By International Electrotechnical Commission (IEC). Geneva: IEC, 2009.


TELECOMMUNICATION NETWORKS Information Handling Services (IHS)

TIA Telecommunication standards database /By Telecommunication Industry Association (TIA) and Information Handling Services (IHS). Englewood: Information Handling Services (IHS), 2009.

TELECOMMUNICATION SYSTEMS Information Handling Services (IHS)


TELECOMMUNICATIONS Information Handling Services (IHS)



TEMPERATURE MEASUREMENT AWS


TENSILE TESTING SAA

AS 1391 2007 Metallic materials - Tensile testing at ambient temperature /By Standards Australia. New South Wales: SAA, 2007.

TESTING BSI BS EN 13126-1 2006 Building hardware - Requirements and test methods for windows and

doors height windows - P. 1: Requirements common to all types of hardware /By British Standards Institution (BSI). London: BSI, 2006.

BS EN 13795-2 2004 Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - P. 2: Test methods /By British Standards Institution (BSI). London: BSI, 2009.

IEC

IEC 60079-20-1 2010 Explosive atmospheres - P. 20-1: Material characteristics for gas and vapour classification - Test methods and data /By International Electrotechnical Commission (IEC). Geneva: IEC, 2010.

ISO

ISO 22762-1 2005 Elastomeric seismic-protection isolators - P. 1: Test methods /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

SAA

AS 3894.2 2002 Site testing of protective coatings - M. 2: Non-conductive coatings - Continuity testing - Wet sponge method /By Standards Australia (SAA). New South Wales: SAA, 2002.



SPRING Singapore





SS 5-E3 2003 Methods of test for paints, varnishes and related materials - P.E3: Visual comparison of the colour of paints /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.



SS 358-2 2005 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - P. 2: Test methods /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2005.


TESTING CONDITIONS ISO

ISO 291 2008 Plastics - Standard atmospheres for conditioning and testing /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2008.

SPRING Singapore


TESTING METHODS AOCS

AOCS 2009 Official Methods and Recommended Practices of the AOCS /By David Firestone Editor. 6th ed. Urbana: AOCS, 2009.

THERMAL ENVIRONMENT SYSTEMS ISO

ISO 14505-2 2006 Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - P. 2: Determination of equivalent temperature /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

THERMOPLASTIC POLYMERS ISO

ISO 4665 2006 Rubber, vulcanized or thermoplastic - Resistance to weathering /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

TITANIUM ALLOYS AWS

AWS A5.16/A5.16M 2007 Titanium and Titanium-alloy welding electrodes and rods /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2007.



TOYS ISO

ISO 8124-3 2010 Safety of toys - P. 3: Migration of certain elements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.

ISO 8124-4 2010 Safety of toys - P. 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use /By International Organization for Standardization (ISO). Geneva: ISO, 2010.

TRANSFORMERS IEC

IEC/TS 60076-14 2009 Power transformers - P. 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2009.

UNITS OF MEASUREMENT ISO



ISO 80000-11 2008 Quantities and units - P. 11: Characteristic numbers /By International Organization for Standardization (ISO). Geneva: ISO, 2008.


VARNISHES ISO

ISO 3251 2008 Paints, varnishes and plastics - Determination of non-volatile-matter content /By International Organization for Standardization (ISO). 4th ed. - - Geneva: ISO, 2008.


SPRING Singapore









SS 5-B5 2003 Methods of test for paints, varnishes and related materials - P.B5: Skinning (partially filled container) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.


SS 5-B7 2003 Methods of test for paints, varnishes and related materials - P.B7: Density /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.


SS 5-B10 2003 Methods of test for paints, varnishes and related materials - P.B10: Spraying properties /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.


SS 5-B13 2003 Methods of test for paints, varnishes and related materials - P.B13: fineness of grind /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.







VESSELS AWS


VISCOSITY MEASUREMENT SPRING Singapore


VITAMIN B COMPLEX BSI

BS EN 14166 2009 Foodstuffs - Determination of vitamin B6 by microbiological assay /By British Standards Institution (BSI). London: BSI, 2009.

VOCABULARY SAA

AS 1929 2009 Non-destructive testing - Glossary of terms /By Standards Australia (SAA). New South Wales: SAA, 2009.

SAA

AS 4749 2007 Non-destructive testing - Terminology of and abbreviations for fusion weld imperfections as revealed by radiography /By Standards Australia (SAA). 2nd ed. New South Wales: SAA, 2007.

VULCANIZED RUBBER ISO

ISO 4665 2006 Rubber, vulcanized or thermoplastic - Resistance to weathering /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.


ISO 4666-2 2008 Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - P. 2: Rotary flexometer /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.

ISO 4666-4 2007 Rubber, vulcanized - Determination of temperature rise and resistance to fatigue in flexometer testing - P. 4: Constant-stress flexometer /By International Organization for Standardization (ISO). Geneva: ISO, 2007.

WASTE HANDLING SPRING Singapore

CP 100 2004 Code of practice for hazardous waste management /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2004.

WATER SUPPLY SPRING Singapore

CP 48 2005 Code of practice for water services /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2005.

WEAR RESISTANCE SPRING Singapore SS 5-F3 2003 Methods of test for paints, varnishes and related materials - P. F3: Abrasion

resistance (Taber abrader) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.

WEATHER RESISTANCE ISO ISO 4665 2006 Rubber, vulcanized or thermoplastic - Resistance to weathering /By

International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

WEATHERING SPRING Singapore SS 5-G4 2003 Methods of test for paints, varnishes and related materials - P.G4: Accelerated

weathering (Xenon arc) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2003.


WELDED JOINTS AWS

AWS D14.4/D14.4M 2005 Welded joints in machinery and equipment /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2005.

WELDED JOINTS - QUALITY CONTROL AWS

AWS D8.1M 2007 Automotive weld quality - Resistance spot welding of steel /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2007.

WELDERS AWS


WELDERS (PERSONNEL) AWS


WELDING AWS






AWS D16.2M/D16.2 2007 Guide for components of robotic and automatic arc welding installations /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2007.

AWS D17.2/D17.2M 2007 Resistance welding for aerospace applications /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2007.



ISO

ISO 5182 2008 Resistance welding - Materials for electrodes and ancillary equipment /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.

SPRING Singapore

SS 510 2005 Code of practice for safety in welding and cutting (and other operations involving the use of heat) /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: Spring Singapore, 2005.

WELDING - ACCEPTANCE (APPROVAL)

AWS




WELDING - CODES AWS

AASHTO/AWS D1.5/D1.5 2008 Bridge Welding Code /By American Welding Society (AWS), American National Standards Institute (ANSI) and American Association of State Highway and Transportation Officials (AASHTO). 5th ed. Miami: AWS, 2008.



AWS D1.8/D1.8M 2005 Structural welding code - Seismic supplement /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2005.


WELDING ELECTRODES AWS




AWS A5.24/A5.24M 2005 Zirconium and Zirconium-alloy welding electrodes and rods /By American Welding Society (AWS) and American National Standards Institute (ANSI). Miami: AWS, 2005.





WELDING EQUIPMENT AWS


WELDING - QUALITY CONTROL AWS


WELDING RODS AWS






WET-STRENGTH TESTS SPRING Singapore


WINDOWS BSI

BS EN 13126-1 2006 Building hardware - Requirements and test methods for windows and doors height windows - P. 1: Requirements common to all types of hardware /By British Standards Institution (BSI). London: BSI, 2006.

SAA

AS 5040 2003 Installation of security screen doors and window grilles /By Standards Australia (SAA). New South Wales: SAA, 2003.

SPRING Singapore

SS 212 2007 Aluminium alloy windows /By Singapore, Productivity and Innovation Board (SPRING Singapore). Singapore: SPRING Singapore, 2007.

WIRE ROPES SAA

AS 3569 2010 Steel wire ropes - Product specification /By Standards Australia (SAA). 2nd ed. New South Wales: SAA, 2010.

WOODBASED SHEET MATERIALS BSI

BS EN 13986 2004 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking /By British Standards Institution (BSI). London: BSI, 2004.

BS EN 14354 2004 Wood-based panels - Wood veneer floor covering /By British Standards Institution (BSI). London: BSI, 2004.


WROUGHT ALLOYS AWS


ZIRCONIUM AWS



/012304567

89:;98<=>2?@

#$%. 2366 2551 IJKLJIMNOPQR MSTU 4: IJKLJIMNOPQRVVIWXLQYSZ[WUTU\]TV^_T`^ Na`ZPJKP[KKWbbcÌP[dNNSJK

801A/4BC05DDE0

#$%. 2439 2552 MePfgV^h]iWbbc`Na`ZPJKhZie_ÙPiVjkV^MZS_ Mlm`[Li`je_ÙnSVLoJp

802@9;802FG>1H9IJ?

#$%. 14040 2552 I`PRJLI`PNOg^d_LSiVU: I`PnP[MUOj_JqRJIP]\_Or: ZSJII`PdS[IPVKI`PLa`MjOjI`P

#$%. 14044 2552 I`PRJLI`PNOg^d_LSiVU: I`PnP[MUOj_JqRJIP]\_Or: kiVIa`ZjLdS[kiVdj[ja`

KL0/MGN;H97


<K2OPNQK29L

#$%. 2440 2552 MePfgV^h]iMZSsIISi`WPiNjOU: o`]j[Zt^riUu\gU\PVpnP[N`j

<K2OPNQRQ80SD


<K2OPNQTRA - <UGV88GA052A=4>/


<K2OPNQTRAT4K29L<2ON4


<K2OPNQTRA5DDE0T4:A04


<K2OPNQTRAN><GV862N4>8=?

#$%. 2368 2551 KPOoJvwQWbbc`dS[VOMSsIuPVjOINQu\gV`RU\N`PVJjrP`p: I`PIa`RJLI`Ph]iN`PVJjrP`pK`^]jOL


<K2OPNQ1A/5WX


<K2OPNQ19;5D

#$%. 2425 2552 MePfgV^rJL_^RPh]iIP[dNMZSfVdKKWUTU\VtnIPvQncVÎJjIP[dNMIOj Na`ZPJKh]ihju\gVpxTV`yJpdS[h]ihjSJIzv[u\geSi`pIJj MSTU 1 ZSJIMIvwQuJg_Wn

<K2OPNQ19;LQ@282YS=5DDE0

#$%. 2425 2552 MePfgV^rJL_^RPh]iIP[dNMZSfVdKKWUTU\VtnIPvQncVÎJjIP[dNMIOj Na`ZPJKh]ihju\gVpxTV`yJpdS[h]ihjSJIzv[u\geSi`pIJj MSTU 1 ZSJIMIvwQuJg_Wn

<K2OPNQ6C0Z7<8>2?1


<K2OPNQN[X44/


<K2OPNQN[X4N0U02


\G08<W]7L

#$%. 14025 2552 lSÌNOg^d_LSiVUdS[ea`nP[I`yNOg^d_LSiVU: ea`nP[I`yNOg^d_LSiVUnP[Mouu\g 3: ZSJII`PdS[kJ{jrVjI`PnqOKJrO

;LQZK/5DDE0


19L4C05DDE0

#$%. 2427 2552 rJ_ja`Wbbc`kV^N`pWbbc`ZtiUlj_j

40 >̂80 - S:1<1N2]P

#$%. 2304 2552 dKrMrVP\gn|UoxUO MSTU 3 dKrMrVP\gj`}OI`


4><L_L>670 - 802@9;802

#$%. 14025 2552 lSÌNOg^d_LSiVUdS[ea`nP[I`yNOg^d_LSiVU: ea`nP[I`yNOg^d_LSiVUnP[Mouu\g 3: ZSJII`PdS[kJ{jrVjI`PnqOKJrO



S:1<1N2]P #$%. 2304 2552 dKrMrVP\gn|UoxUO MSTU 3 dKrMrVP\gj`}OI`

H0R4YU[Q1A/ #$%. 2440 2552 MePfgV^h]iMZSsIISi`WPiNjOU: o`]j[Zt^riUu\gU\PVpnP[N`j

LQ@2R]L>1FG>1H9IJ? #$%. 14040 2552 I`PRJLI`PNOg^d_LSiVU: I`PnP[MUOj_JqRJIP]\_Or: ZSJII`PdS[IPVKI`P

La`MjOjI`P

#$%. 14044 2552 I`PRJLI`PNOg^d_LSiVU: I`PnP[MUOj_JqRJIP]\_Or: kiVIa`ZjLdS[kiVdj[ja`.

L9=;[SGYN[M82I?5DDE0 #$%. 2425 2552 MePfgV^rJL_^RPh]iIP[dNMZSfVdKKWUTU\VtnIPvQncVÎJjIP[dNMIOj Na`ZPJKh]ihju\gVpxT

V`yJpdS[h]ihjSJIzv[u\geSi`pIJj MSTU 1 ZSJIMIvwQuJg_Wn


#$%. 2427 2552 rJ_ja`Wbbc`kV^N`pWbbc`ZtiUlj_j

L> ]̀6;=N: #$%. 2381 &. 2(11) 2552 I`PuLNVKVJjrP`pRÌWb MSTU 2(11) _O~\uLNVKS_LPtT^dN^/S_LPiVj -

_O~\uLNVKI`PStIWZUikV^�SOroJvwQNa`MPsRLi_pS_LPtT^dN^

#$%. 2381 &. 2(12) 2552 I`PuLNVKVJjrP`pRÌWb MSTU 2(12) _O~\uLNVKS_LPtT^dN^/S_LPiVj - _O~\uLNVKI`PStIWZUikV^_JNLtLi_pS_LPtT^dN^


#$%. 2381 &. 2(13) 2552 I`PuLNVKVJjrP`pRÌWb MSTU 2(13) _O~\uLNVKS_LPtT^dN^/ S_LPiVj - _O~\uLNVKI`PRtLrOLWbkV^_JNLtLi_pS_LPtT^dN^

#$%. 2381 &. 10(2) 2552 I`PuLNVKVJjrP`pRÌWb MSTU 10(2) e_ÙPiVj�OLnIrO - I`PuLNVKI`PILLi_pSxIISU

=07Z62_9a6? #$%. 2434 2552 N`pMeMKOSYuPeUjèU rJ_jaùV^dL^ ZtiUlj_jmVSOYVMSb�j Na`ZPJKI`PrOLrJ{^

dKKdk_jhjVÌ`y

=075DDE0 #$%. 2427 2552 rJ_ja`Wbbc`kV^N`pWbbc`ZtiUlj_j

=>PQSL;GAN/ - 802@9;802 #$%. 14025 2552 lSÌNOg^d_LSiVUdS[ea`nP[I`yNOg^d_LSiVU: ea`nP[I`yNOg^d_LSiVUnP[Mouu\g 3:

ZSJII`PdS[kJ{jrVjI`PnqOKJrO



U/AN8bL7<1]c7L #$%. 2440 2552 MePfgV^h]iMZSsIISi`WPiNjOU: o`]j[Zt^riUu\gU\PVpnP[N`j

U/AN1A/GA0Q #$%. 2439 2552 MePfgV^h]iWbbc`Na`ZPJKhZie_ÙPiVjkV^MZS_ Mlm`[Li`je_ÙnSVLoJp

U/AN1[b4 #$%. 2439 2552 MePfgV^h]iWbbc`Na`ZPJKhZie_ÙPiVjkV^MZS_ Mlm`[Li`je_ÙnSVLoJp

U/AN6C0N0U02TRAKL0/;94 #$%. 2439 2552 MePfgV^h]iWbbc`Na`ZPJKhZie_ÙPiVjkV^MZS_ Mlm`[Li`je_ÙnSVLoJp

U/AN4dPQ #$%. 2439 2552 MePfgV^h]iWbbc`Na`ZPJKhZie_ÙPiVjkV^MZS_ Mlm`[Li`je_ÙnSVLoJp


UGN;5DDE0 #$%. 2368 2551 KPOoJvwQWbbc`dS[VOMSsIuPVjOINQu\gV`RU\N`PVJjrP`p: I`PIa`RJLI`Ph]iN`PVJjrP`p

K`^]jOL

N941207@085D - L>`]6;=N: #$%. 2381 &. 2(11) 2552 I`PuLNVKVJjrP`pRÌWb MSTU 2(11) _O~\uLNVKS_LPtT^dN^/S_LPiVj -

_O~\uLNVKI`PStIWZUikV^�SOroJvwQNa`MPsRLi_pS_LPtT^dN^

#$%. 2381 &. 2(12) 2552 I`PuLNVKVJjrP`pRÌWb MSTU 2(12) _O~\uLNVKS_LPtT^dN^/S_LPiVj - _O~\uLNVKI`PStIWZUikV^_JNLtLi_pS_LPtT^dN^

#$%. 2381 &. 2(13) 2552 I`PuLNVKVJjrP`pRÌWb MSTU 2(13) _O~\uLNVKS_LPtT^dN^/ S_LPiVj - _O~\uLNVKI`PRtLrOLWbkV^_JNLtLi_pS_LPtT^dN^

#$%. 2381 &. 10(2) 2552 I`PuLNVKVJjrP`pRÌWb MSTU 10(2) e_ÙPiVj�OLnIrO - I`PuLNVKI`PILLi_pSxIISU


Alphabetical Subject Index

Descriptor page

Acoustoelectric devices 1

Aerospace transport 1

Air 1

Air -conditioning equipment 1

Air -conditioning systems 2

Airborne sound insulation 2

Aircraft 2

Alkali-resistance tests 2

Alloy steels 2

Alternating current 2

Aluminium 3

Aluminium alloys 3

Ambulances 3

Animal feed 3

Approval testing 3

Arc welding 3

Atoms 4

Austenitic steels 4

Automotive engineering 5

Banks 5

Bar codes 5

Belt drives 5


Descriptor page

Bend testing 5

Biological analysis and testing 5

Blood transfusion equipment 6

Board (paper) 6

Boiling pans 6

Boxes (electric) 6

Bridges - Structural steels 6

Brushing (coating) 7

Building sites 7

Calibrating 7

Carbon-arc welding 7

Carbon electrodes 7

Castings 7

Catheters - Respiratory systems 8

Ceramics 8

Character sets 8

Chemical analysis and testing 8

Chemistry 8

Chillies 9

Circuit-breakers 9

Classification systems 9

Cleaning - Performance 9

Coatings 9


Descriptor page

Codes 10

Collapsible containers 10

Colour-fastness tests 10

Communication equipment 10

Compressed air 10

Compressors 11

Computer-aided design 11

Concretes 11

Conformity assessment 11

Constant-stress flexometer 11

Construction materials 11

Cooking appliances 12

Cranes 12

Cutting 12

Dairy products 12

Dangerous materials 13

Density measurement 13

Design - Signs 13

Designations 13

Determination of content - Opacity 13

Doors 14

Dry-heat tests 14

Earphones 14


Descriptor page

Earth-moving equipment 14

Earthing switches 14

Electric ballasts 15

Electric cables 15

Electric control equipment 15

Electric sockets - Portable 15

Electrical accessories 15

Electrical engineering 15

Electrical equipment 16

Electrical household appliances 16

Electrical installations 17

Electrical measurement 18

Electrical measuring instrument 18

Electrical safety 18

Electrically-insulated bushings 19

Electrodes 19

Electromagnetic compatibility (EMC) 19

Electromagnetic fields 19

Emergency lighting 19

Emergency vehicles 20

Emission 20

Environmental management

Environmental testing 20


Descriptor page

Ergonomics 20

Ethanol 20

Exhibition management services 21

Explosive atmospheres 21

Eye protectors 21

Fences 21

Filler metal - Alloys 22

Fillers 22

Fillers - Physical properties of materials 22

Fire alarms 22

Fire detectors 22

Fire doors 22

Fire protection 23

Fire safety 23

Fire tests 23

Flexible cables 24

Fluorescent lamps 24

Fluxes 24

Food products 24

Food testing 25

Fork trucks 25

Fuel oil 25

Fuels 25


Descriptor page

Fume cupboards 26

Fuses 26

Gas cylinders 26

Gas pipes 27

Gas-welding equipment 27

Generating sets 27

Gloss (of surface) 27

Gloves 27

Graphic symbols 28

Hazardous areas classification (for electrical equipment) 28

Health and safety requirements 28

Health services 29

Heat pumps 29

Helmets (protective) 29

High-voltage 30

High-voltage equipment 30

High-voltage tests 30

Hoisting slings 30

Hospital equipment 30

Hot-dip coating 31

Hot-dip galvanizing 31

Hotels 31

Housing 31


Descriptor page

Hull compartments 31

Hydraulic equipment 32

Identity cards 32

Immersion heaters 32

Information 32

Information security management 32

Information technology 33

Infrared radiation 33

Instrument transformers 34

Insulated cables 34

Interior lighting 34

Interlocks 34

Iron 35

Isolator switches 35

Isolator system 35

Knowledge management 35

Labels 35

Lamps 35

Lenses 36

Light 36

Lighting columns 36

Lighting equipment 36

Liquefied natural gas 36


Descriptor page

Liquid chromatography 36

Liquid fuels 37

Low-alloy steels 37

Machinery 37

Magnetic materials 37

Magnetic measurement 38

Management techniques 38

Marking 38

Materials handling 38

Mattresses 39

Measuring instruments 39

Medical equipment 39

Metal coatings 41

Metals 41

Microbiological analysis 42

Microbiological safety cabinets 42

Microbiology 42

Milk 42

Milk products 42

Motor cycles 43

Natural gas 43

Nickel alloys 43

Non-destructive testing 43


Descriptor page

Non-volatile matter determination 44

Non-woven cloth 44

Nuclear physics 44

Numbers 45

Occupational safety 45

Ophthalmic equipment 45

Outdoor sports equipment 45

Packages 45

Packaging - Dimensions 46

Packaging materials 46

Paints 47

Paper 50

Paper pulp 50

Particle boards 51

Passenger conveyors 51

Pedestrian roads 51

Penetration tests 51

Performance 51

Performance evaluation 52

Performance standards 52

Personal identification 52

Petroleum 52

Petroleum products 53


Descriptor page

Physical chemistry 53

Physical properties of materials 53

Pipes - Gas supply 53

Pipes - Plastics 54

Pipes - Polypropylene 54

Pipework systems 54

Plastics 54

Plastics products 54

Playground equipment 55

Plug adaptors 55

Polyvinyl chloride 55

Power transformers 55

Pressures pipes 55

Primers (paint) 56

Primers (paint) - Iron 56

Primers (paint) - Steels 56

Proficiency testing 56

Protective coatings 56

Protective equipment 56

Qualification approval 57

Quality assurance 57

Quality - Management techniques 57

Quantity 57


Descriptor page

Radio disturbances 58

Ratings 58

Recording systems 58

Reinforcing materials 59

Reinforcing steels 59

Resistance welding 59

Risk management 59

Road marking 59

Road surfacing 60

Roof coverings 60

Roofing tiles 60

Rotary flexometer 60

Safety belts 60

Safety measures 61

Salt-spray tests 61

Sampling methods 61

Sanitary engineering 62

Scaffolding 62

Scratch tests 62

Scaffolds - Metals 62

Security techniques 62

Seismic areas 63

Semiconductor devices 63


Descriptor page

Sheet materials 63

Signs 63

Smoke control 64

Socket adaptors 64

Soldering 64

Soldering equipment 64

Solid-state physics 65

Specimen preparation 65

Spectacle lenses 65

Spectroscopy 65

Sphygmomanometers 65

Sports equipment 66

Spraying (coating) 66

Sprinkler systems 66

Sprinklers 66

Steel pipes 66

Steel-wire ropes 66

Steels 67

Sterilization (hygiene) 67

Storage 68

Storage batteries 68

Storage water heaters 69

Structural steels - Codes 69


Descriptor page

Submerged arc welding 69

Suction apparatus (medical) 69

Sulphuric acid 69

Symbols 70

Tank (containers) 70

Technical documents 71

Telecommunication networks 71

Telecommunication systems 71

Telecommunications 71

Temperature measurement 72

Tensile testing 72

Testing 72

Testing conditions 74

Testing methods 74

Thermal environment systems 74

Thermoplastic polymers 74

Titanium alloys 74

Toys 75

Transformers 75

Varnishes 75

Vessels 78

Viscosity measurement 78

Vitamin B complex 78


Descriptor page

Vocabulary 78

Vulcanized rubber 78

Waste handling 79

Water supply 79

Wear resistance 79

Weather resistance 79

Weathering 79

Welded joints 80

Welded joints - Quality control 80

Welders 80

Welders (personnel) 80

Welding 80

Welding - Acceptance (approval) 81

Welding - Codes 82

Welding electrodes 82

Welding - Quality control 83

Welding rods 83

Wet-strength tests 84

Windows 84

Wire ropes 84

Woodbased sheet materials 84

Wrought alloys 85

Zirconium 85


;22R4]U9L<2OPNQ

U9L<2OPNQ U4A0

IJKLJIMNOPQR 86

I`riUj{a`Wbbc` 86

I`PRJLI`P�SOroJvwQ 86

e_ÙnSVLoJp 86

MePfgVêPJ_ 86

MePfgV^]Î`db 86

MePfgV^h]i - MZSsIISi`WPiNjOU 86

MePfgV^h]ihjePJ_MPfVj 86

MePfgV^h]iWbbc`hjKi`j 86

MePfgV^h]iVOMSsIuPVjOINQ 86

MePfgV^riUWkT 87

MePfgV^rJLWb 87

MePfgV^rJL_^RPIP[dNWbbc` 87

MePfgVûa`YpMIOPQr 87

MePfgV^VtTjjU 87

MePfgV^VtTjV`Z`P 87

lSÌMk\p_ 87

L_^YeUWbbc` 87

rJ_ja`Wbbc` 87

j`}OI` - dKrMrVP\g 87

jOM_y_Oup` - I`PRJLI`P 88

dKrMrVP\g 88


U9L<2OPNQ U4A0

o`]j[Zt^riU 88

_^RP]\_Or�SOroJvwQ 88

_JNLtdS[VtnIPvQWbbc` 88

_O~\uLNVK 88

N`pYuPyJmuQ 89

N`pWbbc` 89

NOg^d_LSiVU - I`PRJLI`P 89

ZUiVI�_pMr\�p_ 89

ZUiVriUSi`^ 89

ZUiVrt�j 89

ZUiVua`V`Z`Ph]ie_`ULJj 89

ZUiVj�g^ 89

ZSVLWbbc` 90

VJjrP`pR`IWb - _O~\uLNVK 90

ACOUSTOELECTRIC DEVICES IEC - TISIlibrary.tisi.go.th/downloadable/new_release/33_jan-mar53.pdf ·...

Documents

Transcript of ACOUSTOELECTRIC DEVICES IEC - TISIlibrary.tisi.go.th/downloadable/new_release/33_jan-mar53.pdf ·...