ACOUSTICAL CEILINGS AND FLOORS

GUIDED BY :RICHA PATHE

PRESENTED BY :DEEPA SHARMA (101110047)AVISHA VERMA (101110048)PRITI PRASAD (101110049)DEEPAK BAJAJ (101110051)IMRAN KHAN (101110056)SUPRIYA SHARMA (101110102)SWARNABHA MANDAL (101110105)SAUMYA SHARMA (101110107)

ACOUSTIC CEILINGS• Acoustic ceilings are a type of ceiling made with tiles of

material that dampen noise. • they can be painted to match the decor of the room.• One popular use of acoustic ceilings is an instant fix for

unappealing rooms. Instead of an expensive renovation of a dilapidated ceiling, a grid can be installed in a few hours and acoustic ceiling tiles dropped in. Special fluorescent lighting panels which match the dimensions of a single grid can also be wired in minutes and dropped into place.

Acoustic music room ceilingAcoustic ceiling panels

• Aspen™ Acoustical Ceiling Panelsnaturally random-textured panels that provide a sculptured, upscale appearance at an economical price. excellent sound control, good ceiling attenuation class (CAC) performance, can be cleaned easily with a soft brush or vacuum.(CAC- measure for rating the performance of a ceiling system as a barrier to airborne sound transmission )

Suspended acoustic ceiling Theatre acoustic ceiling

• Arctic ClimaPlus™ Acoustical Ceiling Panelsuniquely textured, easy-to-install, exclusive cast process that enhances the surface appearance, delivers excellent sound control and durability, feature a backing that acts as a sound barrier and resists "breathing" (air passing through the surface), resulting in a surface that stays cleaner longer.

ACOUSTIC PANELSSTYLE NOMINAL

SIZESQ. FT. PER CTN

FINISH APPLICATION

WARRANTY

BAROQUE 24x24x5/8 64 1 YEAR

BAROQUE CUSTOMLINE

24x48x3/4 64 10-15 YEAR

DIRECTIONAL FISSURED

24x48x5/8 64

ACOUSTIC PANELSSTYLE NOMINAL

SIZESQ. FT. PER CTN

FINISH APPLICATION

WARRANTY

FINE FISSURED

24x24x5/8 64 1 YEAR

NON DIRECTIONAL PERFORATED

24x48x5/8 64 1 YEAR

CASHMERE 24x24x3/4 64 10-15 YEAR

KEY ATTRIBUTES• intelligent blending of calibrated micro fibres with mineral binders,

extraordinary micro-cell finish, For ceilings, it has edge profiles in Normal, Steppe .

For paneling, edge profiles consist of Normal, F-Spline groove (for 20 mm thickness only).FEATURES• Volume Density - 600 kgs/m3 • Surface density for 15mm - 9 kgs/m2• Sizes - Width 600mm; Lengths 600 / 1200 mm• Thickness - 10 / 15 / 20 mmSITE CONSIDERATION AND WARRANTY• must be stored on a flat surface, Installation surfaces must be dry

and level, .10 years warranty

KEY ATTRIBUTES• features ribbed non-wovens that offers contemporary wall designs

for classy interiors, demanding performance to special venues like multiplexes, auditoria, banquet halls, studios, high impact resistance

FEATURES• Sizes - Width - 600mm; Length - 1200, 2400 mm• Thickness - 20 / 25/ 30 / 40 / 50mm• Edge profiles - Square with long edges kerfed for SoundSpline™ H-

system

SoundSpline™ H-system

KEY ATTRIBUTES• thermally-bonded polyester fibres,10-40 microns thick. No additives

or other resins are used.• eco-friendly, thermacoustic performance enhancer FEATURES• Rolls of 600 mm width and 9m length - easy handling• Surface Densities 500, 1000, 1500 gsm, Thicknesses 10, 25, 50 mm• Non-toxic, non-allergic, non-irritant, lightweight, dimensionally

stable, non-corrosive, temperature resistance - 150 °C, resistant to insect & rodent attack, fully recyclable.

Installation of SoundSynth

1. Acoustic ceilings. 2. Rockwool insulation under floors. 3. Rockwool wall insulation. 4. Rockwool roof insulation. 5. Rockwool façade insulation.

ACOUSTIC FLOORS

ACOUSTIC FLOOR UNDERLAYMENT - RUBBER BASED ACOUSTIC FLOOR MATERIAL• Rubber based floor underlayment made from recycled rubber tires,

used under laminate or engineered hardwood flooring, excellent for use in wood sub floor construction due to its weight & mass, available in thickness of 3.2mm, 6.4mm and 12mm, economically priced, available in 4’ x 25’ & 4’ x 50’ rolls

• Environmentally friendly, made from recycled materials, using 92% post-consumer recycled content

VARIOUS COMPONENTS OF ACOUSTIC FLOORS

COMPONENTS OF ACOUSTIC FLOORS• Standard Resilient Bar system on the ceiling below • Acoustic Mineral Wool (1200 x 600mm x 100mm thick) For use

in the cavity• Acoustic Sealant (10 Linear metres) For sealing the floorboards• Soundproofing Mats (1800 x 1200mm) Laid on top of the

floorboards OPTIONAL• R-10 Roll (5m x 1m) Loose laid on top of the Soundproofing

Mat• Quietboard (1200 x 600mm) Loose laid on top of the R-10

QuietBoard is a revolutionary, waterproof, cement impregnated high-density acoustic floor panel designed to reduce airborne noise transfer through separating floors.

A recycled rubber resilient insulation to isolate floors for effective impact noise reduction through timber suspended floors

SBM5 Soundproofing Mat is a thin, flexible, very effective mineral loaded acoustic mat designed to reduce airborne noise through stud partitions, and timber joisted floors. Particularly useful for many domestic soundproofing projects.

REFERENCE• http://www.acousticalsurfaces.com/applications/applicat.htm• http://www.acousticsupply.com/acoustical.html• Ar. Rajesh Chaubey Amazing Art Shahdol , MP

THANK YOU