Acoustic Emission testing
-
Upload
hareesha-n-gowda-dayananda-sagar-college-of-engg-bangalore -
Category
Engineering
-
view
1.368 -
download
9
description
Transcript of Acoustic Emission testing
6/3/2014 1 Hareesha N G, Dept of Aero Engg,
DSCE
Outline 1. Acoustic Emission phenomena. 2. History of Acoustic Emission from Stone Age to these days. 3. AE instrumentation:
1. Sensors, preamplifiers, cables (types, specific applications). 2. Data Acquisition systems (analog and digital, signal digitation,
filtration). 4. Principals of AE data measurement and analysis. 5. Source location. Attenuation, dispersion, diffraction and scattering
phenomena. 6. AE in metals. 7. Relationship between AE and fracture mechanics parameters and effects of
AE. 8. AE applications. 9. International AE standards. 10. Conclusions.
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 2
Definition of Acoustic Emission Phenomenon
• Acoustic Emission is a phenomenon of sound and ultrasound wave radiation in materials undergo deformation and fracture processes.
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 3
Acoustic Emission Instrumentation Typical AE apparatus consist of the following components: • Sensors used to detect AE events. • Preamplifiers amplifies initial signal. • Cables transfer signals on distances up to 200m to AE devices. Cables are
typically of coaxial type. • Data acquisition device performs filtration, signals’ parameters evaluation,
data analysis and charting.
Sensors Main amplifiers
with filters Measurement Circuitry Preamplifiers
with filters Computer
Acquisition
software Data
storage
Data presentation
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 4
AE Sensors
• Purpose of AE sensors is to detect stress waves motion that cause a local dynamic material displacement and convert this displacement to an electrical signal.
• AE sensors are typically piezoelectric sensors with elements maid of special ceramic elements like lead zirconate titanate (PZT). Mechanical strain of a piezo element generates an electric signals.
• Sensors may have internally installed preamplifier (integral sensors). • Other types of sensors include capacitive transducers, laser
interferometers.
Regular piezoelectric sensor Integral piezoelectric sensor Preamplifier 60 dB
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 5
Sensors Characteristics • Typical frequency range in AE applications varies between 20 kHz and 1 MHz. • Selection of a specific sensor depends on the application and type of flaws to be
revealed. • There are two qualitative type of sensor according to their frequency responds:
resonant and wideband sensors. • Thickness of piezoelectric element defines the resonance frequency of sensor. • Diameter defines the area over which the sensor averages surface motion. • Another important property of AE sensors includes Curie Point, the temperature
under which piezoelectric element loses permanently its piezoelectric properties. Curie temperature varies for different ceramics from 120 to 400C0. There are ceramics with over 1200C0 Curie temperature.
AE signal of lead break and corresponding Power spectrum. 6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 6
Installation of Sensors on Structure Type of installation and choice of couplant material is defined by a specifics of
application. • Glue (superglue type) is commonly used for piping inspections. • Magnets usually used to hold sensors on metal pressure vessels. Grease and oil
then used as a couplant. • Bands used for mechanical attachment of sensors in long term applications. • Waveguides (welded or mechanically attached) used in high temperature
applications. • Rolling sensors are used for inspection rotating structures. • Special Pb blankets used to protect sensors in nuclear industry.
Sensor attached with magnet
Pb blanket in nuclear applications
Waveguide Rolling sensor produces by
PAC 6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 7
Methods of AE Sensors Calibration • The calibration of a sensor is the measurement of its voltage output into an established
electrical load for a given mechanical input. Calibration results can be expressed either as frequency response or as an impulse response.
• Surface calibration or Rayleigh calibration: The sensor and the source are located on the same plane surface of the test block. The energy at the sensor travels at the Rayleigh speed and the calibration is influenced by the aperture effect.
• Aperture Effect:
2
1( ) ( , , ) ( , )
( , ) local sensitivity of the tranducer face
region ( ) of the surface contacted by the sensor
area of region
( , , ) displacement ( ) of the surface
S
U t u x y t r x y dxdyA
r x y
S m
A S
u x y t m
Through pulse calibration: The sensor and the source are coaxially located on opposite parallel surfaces. All wave motion is free of any aperture effect.
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 8
AE Data Acquisition Devices
Example of AE device parameters:
• 16 bit, 10 MHz A/D converter.
• Maximum signal amplitude 100 dB AE.
• 4 High Pass filters for each channel with a range from 10 KHz to 200 KHz (under software control).
• 4 Low Pass filters for each channel with a range from 100 KHz to 2.1 MHz (under software control).
• 32 bit Digital Signal Processor.
• 1 Mbyte DSP and Waveform buffer.
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 9
Principals of AE Data Measurement and Analysis
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 10
Threshold and Hit Definition Time (HDT)
Hit 1
Hit 1
Hit 2
Short HDT
Long HDT
Time
Vo
ltag
e
Threshold
Long HDT
Short HDT
Threshold and HDT are parameters that used for detection AE signals in traditional AE devices. HDT: Enables the system to determine the end of a hit, close out the measurement process and store the measured attributes of the signal.
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 11
Burst and Continuous AE Signals
Burst AE is a qualitative description of the discrete signal's related to individual emission events occurring within the material. Continuous AE is a qualitative description of the sustained signal produced by time-overlapping signals.
“AE Testing Fundamentals, Equipment, Applications” , H. Vallen
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 12
AE Parameters
• Peak amplitude - The maximum of AE signal. dB=20log10(Vmax/1µvolt)-preamlifier gain
• Energy – Integral of the rectified voltage signal over the duration of the AE hit. • Duration – The time from the first threshold crossing to the end of the last threshold
crossing. • Counts – The number of AE signal exceeds threshold. • Average Frequency –Determines the average frequency in kHz over the entire AE hit. • Rise time - The time from the first threshold crossing to the maximum amplitude. • Count rate - Number of counts per time unit.
. [ ]AE counts
A F kHzDuration
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 13
Background Noise Background Noise: Signals produced by causes other than acoustic emission and are not relevant to the purpose of the test
Types of noise:
• Hydraulic noise –Cavitations, turbulent flows, boiling of fluids and leaks.
• Mechanical noise –Movement of mechanical parts in contact with the structure e.g. fretting of pressure vessels against their supports caused by elastic expansion under pressure.
• Cyclic noise – Repetitive noise such as that from reciprocating or rotating machinery.
• Electro-magnetic noise.
Control of noise sources:
• Rise Time Discriminator – There is significant difference between rise time of mechanical noise and acoustic emission.
• Frequency Discriminator – The frequency of mechanical noise is usually lower than an acoustic emission burst from cracks.
• Floating Threshold or Smart Threshold – Varies with time as a function of noise output. Used to distinguish between the background noise and acoustic emission events under conditions of high, varying background noise.
Time
Am
plit
ude
0 200 400 600 800 1000 1200 1400 1600 1800-150
-100
-50
0
50
100
150
Floating threshold
Master – Slave Technique – Master sensor are mounted near the area of interest and are surrounded by slave or guard sensors. The guard sensors eliminate noise that are generated from outside the area of interest.
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 14
Attenuation, Dispersion, Diffraction and Scattering Phenomena
The following phenomena take place as AE wave propagate along the structure:
Attenuation: The decrease in AE amplitude as a stress wave propagate along a structure due to Energy loss mechanisms, from dispersion, diffraction or scattering.
Dispersion: A phenomenon caused by the frequency dependence of speed for waves. Sound waves are composed of different frequencies hence the speed of the wave differs for different frequency spectrums.
Diffraction: The spreading or bending of waves passing through an aperture or around the edge of a barrier.
Scattering: The dispersion, deflection of waves encountering a discontinuity in the material such as holes, sharp edges, cracks inclusions etc….
Attenuation tests have to be performed on the actual structures during their inspection.
The attenuation curves allows to estimate amplitude or energy of a signal at the at the given the distance from the sensor.
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 15
Source Location
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 16
Source Location Concepts
• Time difference based on threshold crossing.
• Cross-correlation time difference.
• Zone location.
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 17
Linear Location • Linear location is a time difference method commonly used to locate AE source
on linear structures such as pipes. It is based on the arrival time difference between two sensors for known velocity.
• Sound velocity evaluated by generating signals at know distances.
1
2
distance from first hit sensor
D = distance between sensors
wave velocity
d D T V
d
V
Material Effective velocity in a thin rod [m/s]
Shear [m/s]
Longitudinal [m/s]
Brass 3480 2029 4280
Steel 347 5000 3089 5739
Aluminum 5000 3129 6319 6/3/2014
Hareesha N G, Dept of Aero Engg, DSCE
18
Two Dimensional Source Location • For location of an AE source on a plane two sensors are used. The source is
situated on a hyperbola.
1,2 1 2
2
2 2 2
1 2
2 2 2 2
2 1 2
2 2 2
2 1
1 1,2 2
2 2 2
1,2
2
1,2
sin
( )
sin ( cos )
2 cos
1
2 cos
t V R R
Z R
Z R D R
R R D R
R R D D
R t V R
D t VR
t V D
Sensor 1
Sensor 2
Sensor 1
1
2
1,2
2
distance between sensor 1 and 2
distance between sensor 1 and source
distance between sensor 2 and source
time differance between sensor 1 and 2
angle between lines and
line perpend
D
R
R
t
R D
Z
icular to D
Z D
R3 R2
R1
R1
R2 R3
Sensor 2
Sensor 3
Three sensors are used to locate a source to a point by intersecting two hyperbolae using the same technique as two sensors.
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 19
Ch 1
Ch 2
Δt
Normalized cross-correlation function
Δt )}(max{
21 )()()(
tC
ChCh
tt
dttSStC
Cross-correlation function
Cross-correlation based Location
Cross-correlation method is typically applied for location of continuous AE signals.
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 20
Zone Location • Zone location is based on the principle that the sensor with the highest
amplitude or energy output will be closest to the source.
• Zonal location aims to trace the waves to a specific zone or region around a sensor.
• Zones can be lengths, areas or volumes depending on the dimensions of the array.
• With additional sensors added, a sequence of signals can be detected giving a more accurate result using time differences and attenuation characteristics of the wave.
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 21
Acoustic Emission in Metals
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 22
Sources of AE in Metals
Microscopic sources
includes dislocation movement, interaction, annihilation, slip formation, voids nucleation, growth and interaction and many other.
Major macroscopic sources
of AE in metals are: crack jumps, plastic deformation development, fracturing and de-bonding of hard inclusions.
……..
interaction
motion
formation
……..
interaction
motion
formation
Phase
changes
Possible combinations
AE SOURCES
6.9 10236
Twining
Slip
……
branching
development
nucleation
……
branching
development
nucleation
crack
formation
fracturing
bond
connection
fracturing
crack
formation
fracturing
bond
connection
fracturing
Inclusions
interaction
growth
nucleation
interaction
growth
nucleation
Micro-crack
Voids
movement
annihilation
interaction
migration
generation
nucleation
movement
annihilation
interaction
migration
generation
nucleation
Dislocations
Recrystalli-
zation
More then 80% of energy expended on fracture in common industrial metals goes to development of plastic deformation.
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 23
Plastic Deformation • Plastic deformation development is accompanied by the motion of a large numbers of dislocations.
The process by which plastic deformation is produced by dislocation motions is called slip. The crystallographic plane along which the dislocation line moves is called the slip plane and the direction of movement is called the slip direction. The combination of the two is termed the slip system.(1)
• The motion of a single vacancy and a single dislocation emits a signal of about 0.01-0.05eV. • The best sensitivity of modern AE devices equals 50-100eV.
Edge dislocation Screw dislocation Mixed dislocation
Edge dislocation motion
1 2 3 4 5
Edge and screw are the two fundamental types of dislocation.
(1) Materials Science and Engineering an Introduction, William D. Callister, Jr.
Physical
Process
Activation
Energy (eV)
Dislocation
glide
1.2
Formation of dislocation
8-10
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 24
Plastic Zone at the Crack Tip • Flaws in metals can be revealed by detection of indications of plastic
deformation development around them. • Cracks, inclusions, and other discontinuities in materials concentrate stresses. • At the crack tip stresses can exceed yield stress level causing plastic
deformation development. • The size of a plastic zone can be evaluated using the stress intensity factor K,
which is the measure of stress magnitude at the crack tip. The critical value of stress intensity factor, KIC is the material property called fracture toughness.
2
1
2
plastic zone size in elastic material
Iy
ys
y
Kr
r
Fracture Mechanics Fundamentals and Applications, Second Edition, T.L Anderson. 6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 25
Factors that Tend to Increase or Decrease the Amplitude of AE
Nondestructive Testing Handbook, volume 6 “Acoustic Emission Testing”, Third Edition, ASNT.
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 26
Relationship between AE and Fracture Mechanics Parameters
and AE Effects
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 27
Models of AE in Metals Plastic Deformation Model
• Plastic deformation model relates AE and the stress intensity factor ( ).
• AE is proportional to the size of the plastic deformation zone.
• Several assumptions are made in this model: (1) The material gives the highest rate of AE when it is loaded to the yield strain. (2) The size and shape of the plastic zone ahead of the crack are determined from linear elastic fracture mechanics concepts.
1K
2
11
2 or 6 (plain stress or plain strain)
y
ys
Kr
(3) Strains at the crack tip vary at where r is the radial distance from the crack tip. (4)
AE count rate
volume strained between (yield strain) and (uniform strain)
p
p y u
N V
N
V
0.5r
2 22 2 4 4
2 2 4
4
4
1 1
2 2 4 4
plate thickness
V
u y
p y u
y u y u
p
K K BV r r B B K
E E E
B
K
N K
The assumptions lead to development of the following equations for the model ( ) 2
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 28
Fatigue Crack Model • Several models were developed to relate AE count rate with crack
propagation rate.
2' '
2
'
'
' ' '
AE count rate due to plastic deformation
AE count rate due to fracture
(1 )(1 )
mm
p p c s m
p
c
p c
K KN C K N C
RR
N
N
N N N
'
'
(Eq.1) The relation between AE count rate and stress intensity factor
(Eq.2) Paris law for crack propo
AE count rate per cycle
Stress intensity factor
, constants
m
n
da
dN
N A K
N
K
A n
C K
gation in fatigue
The combined contribution of both plastic deformation and fracture mechanism is as follows for plastic yielding:
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 29
AE Effects • Kaiser effect is the absence of detectable AE at a fixed sensitivity level, until
previously applied stress levels are exceeded.
• Dunegan corollary states that if AE is observed prior to a previous maximum load, some type of new damage has occurred. The dunegan corollary is used in proof testing of pressure vessels.
• Felicity effect is the presence of AE, detectable at a fixed predetermined sensitivity level at stress levels below those previously applied. The felicity effect is used in the testing of fiberglass vessels and storage tanks.
stress at onset of AEfelicity ratio
previous maximum stress
Kaiser effect (BCB)
Felicity effect (DEF) 6/3/2014
Hareesha N G, Dept of Aero Engg, DSCE
30
Applications
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 31
AE Inspection of Pressure Vessels
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 32
AE Inspection of Pressure Vessels
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 33
AE Testing of Pressure Vessels
(1)Nondestructive Testing Handbook, volume 6 “Acoustic Emission Testing”, Third Edition, ASNT.
Pressure Policy for a New Vessel(1)
Example of Transducers Distribution on Vessel's Surface(1) Typical Results Representation of Acoustic Emission Testing(1)
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 34
Example of Pressure Vessel Evaluation
• Historic index is a ratio of average signal strength of the last 20% or 200, whichever is less, of events to average signal strength of all events.
N
i
i
N
Kt
i
S
S
KN
NtH
1
0
1
0
)(
10
1
010
1 i
i
iav SS
(1)Nondestructive Testing Handbook, volume 6 “Acoustic Emission Testing”, Third Edition, ASNT.
The numbers on plot correspond to sensors numbers.(1)
N – number of hits, S0i – the signal strength of the i-th event, J – specific number of events K=0.8J for J≤N≤1000 and K=N-200 for N>1000
Severity is the average of ten events having the largest numerical value of signal strength.
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 35
AE Standards
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 36
AE Standards ASME - American Society of Mechanical Engineers • Acoustic Emission Examination of Fiber-Reinforced Plastic Vessels, Article 11, Subsection A, Section V, Boiler and
Pressure Vessel Code • Acoustic Emission Examination of Metallic Vessels During Pressure Testing, Article 12, Subsection A, Section V, Boiler and
Pressure Vessel Code • Continuous Acoustic Emission Monitoring, Article 13 Section V ASTM - American Society for Testing and Materials • E569-97 Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation • E650-97 Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors • E749-96 Standard Practice for Acoustic Emission Monitoring During Continuous Welding • E750-98 Standard Practice for Characterizing Acoustic Emission Instrumentation • E976-00 Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response • E1067-96 Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels • E1106-86(1997) Standard Method for Primary Calibration of Acoustic Emission Sensors • E1118-95 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) • E1139-97 Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries • E1211-97 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors • E1316-00 Standard Terminology for Nondestructive Examinations • E1419-00 Standard Test Method for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission • E1781-98 Standard Practice for Secondary Calibration of Acoustic Emission Sensors • E1932-97 Standard Guide for Acoustic Emission Examination of Small Parts • E1930-97 Standard Test Method for Examination of Liquid Filled Atmospheric and Low Pressure Metal Storage Tanks
Using Acoustic Emission • E2075-00 Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod • E2076-00 Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 37
AE Standards ASNT - American Society for Nondestructive Testing • ANSI/ASNT CP-189, ASNT Standard for Qualification and Certification of Nondestructive Testing Personnel. • CARP Recommended Practice for Acoustic Emission Testing of Pressurized Highway Tankers Made of
Fiberglass reinforced with Balsa Cores. • Recommended Practice No. SNT-TC-1A.
Association of American Railroads • Procedure for Acoustic Emission Evaluation of Tank Cars and IM-101 tanks, Issue 1, and Annex Z thereto, “
Test Methods to Meet FRA Request for Draft Sill Inspection program, docket T79.20-90 (BRW) ,” Preliminary 2
Compressed Gas Association • C-1, Methods for Acoustic Emission Requalification of Seamless Steel Compressed Gas Tubes.
European Committee for Standardization • DIN EN 14584, Non-Destructive Testing – Acoustic Emission – Examination of Metallic Pressure Equipment
during Proof Testing; Planar Location of AE Sources. • EN 1330-9, Non-Destructive Testing – Terminology – Part 9, Terms Used in Acoustic Emission Testing. • EN 13477-1, Non-Destructive Testing – Acoustic Emission – Equipment Characterization – Part 1,
Equipment Description. • EN 13477-2, Non-Destructive Testing – Acoustic Emission – Equipment Characterization – Part 2,
Verification of Operating Characteristics. • EN 13554, Non-Destructive Testing – Acoustic Emission – General Principles.
Institute of Electrical and Electronics Engineers • IEEE C57.127, Trial-Use guide for the Detection of Acoustic Emission from Partial Discharges in Oil-
Immersed Power Transformers.
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 38
AE Standards International Organization for Standardization • ISO 12713, Non-Destructive Testing - Acoustic Emission Inspection – Primary Calibration of
Transducers. • ISO 12714, Non-Destructive Testing - Acoustic Emission Inspection – Secondary Calibration of
Acoustic Emission Sensors. • ISO 12716, Non-Destructive Testing - Acoustic Emission Inspection – Vocabulary • ISO/DIS 16148, gas Cylinders – Refillable Seamless Steel gas Cylinders – Acoustic Emission
Examination (AEE) for Periodic Inspection.
Japanese Institute for Standardization • JIS Z 2342, Methods for Acoustic Testing of Pressure Vessels during Pressure Tests and
Classification of Test Results.
Japanese Society for Nondestructive Inspection • NDIS 2106-79, Evaluation of performance Characteristics of Acoustic Emission Testing
Equipment. • NDIS 2109-91, Methods for Absolute calibration of Acoustic Emission Transducers by
Reciprocity Technique. • NDIS 2412-80, Acoustic Emission Testing of Spherical Pressure Vessels of High Tensile
Strength Steel and Classification of Test Results.
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 39
More educational materials on Acoustic Emission available at
www.muravin.com
6/3/2014 Hareesha N G, Dept of Aero Engg,
DSCE 40