Acknowledgement
-
Upload
ojaswita-shrivastava -
Category
Documents
-
view
329 -
download
0
Transcript of Acknowledgement
Summer Internship Project
Inventory Planning & Managementfor Grasim stores
Submitted in partial fulfillment of PGDM program2009-11
Submitted byOjaswita Shrivastava
17/095
Company Guide Faculty GuideMr.Rahul Jhamb Mrs Neetu SardanaHead Retail Business, Grasim Bhiwani Textiles Ltd.
Apeejay School of ManagementNew Delhi
July 2010
1
2
CERTIFICATE
This is to certify that the project work done on “Inventory Planning and Management for Grasim Store” submitted to Apeejay School of Management, Dwarka by Ojaswita Shrivastava in partial fulfillment of the requirement for the award of PG Diploma in Business Management, is a bonafide work carried out by him/her under my supervision and guidance. This work has not been submitted anywhere else for any other degree/diploma. The original work was carried during 10-05-10 to 18-06-10 in Grasim Bhiwani Textiles Ltd
Date: Seal/Stamp of the Organization Name of the guide
Address:
3
DECLARATION
I hereby declare that the project work entitled “Inventory Planning and
management for Grasim stores” is submitted to Apeejay School of
Management, Dwarka is a record of original work done by me under the
guidance of Mrs. Neetu Sardana, faculty member, Apeejay School of
Management, Dwarka and this project work has not been performed the
basis for the award of any degree or diploma and similar project if any.
Ojaswita Shrivastava
Roll number: 17/095
4
ACKNOWLEDGEMENT
I take this opportunity to extend my sincere thanks to Grasim Industries Limited
for offering me a unique platform to earn exposure and garner knowledge in the
field of retail management.
I wish to extend my sincere and heartfelt gratitude to my mentor Mr. Rahul
Jhamb, Head Retail Business, who guided supported and encouraged me during
the entire tenure of the project. I also thank Mr. Suneet Kashyap regional head
manager, for their co-operation and valuable advice through the course of my
project. I am able to say with conviction that I have immensely benefited from
auspicious and prestigious association as a summer intern with Grasim Industries
Ltd.
I express my sincere thanks to my college mentor Ms Neetu Sardana, who has
been guiding me throughout my project.
I also wish to thank each and every employee of the organization who contributed
in their own ways in successful completion of this project.
Ojaswita Shrivastava
Apeejay School of Management
5
TABLE OF CONTENT
1. Executive Summary……………………………………8
2. Company Brief…………………………………………8
3. Need of the project……………………………………..9
4. Overview of the Grasim industry……………………...13
5. Vision, Mission and values……………………………14
6. Distribution channel…………………………………...15
7. Grasim retail identity………………………………….15
8. Management Team……………………………………17
9. The Brand……………………………………………..19
10. Product line…………………………………………...22
11. Strategies of BTM…………………………………....30
12. Competitors Analysis………………………………...33
13. SWOT Analysis of BTM…………………………….34
14. HR policies…………………………………………..36
PART-B
1. About the project……………………………………...38
2. Literature review……………………………………...40
3. Research methodology………………………………..42
4. Problem identification………………………………...42
6
5. Approach to problem…………………………………....43
6. Basic fixed order quantity model and reorder Behavior..48
7. Primary research………………………………………...50
8. Secondary research……………………………………...51
9. Sample size……………………………………………...52
10. Data Collection…………………………………………..52
11. Data Analysis……………………………………………53
12. Synopsis…………………………………………………60
13. DFD of Inventory management process………………...61
PART –C
1. Key learning and conclusion……………………………66
2. Recommendations………………………………………70
3. Annexure – Questionnaire……………………………...71
4. Annexure – Layout and elevation plans of stores………74
5. Bibliography…………………………………………….78
7
EXECUTIVE SUMMARY
Inventory management is primarily about specifying the size and placement of
stocked goods. Inventory management is required at different locations within
a facility or within multiple locations of a supply network to protect the regular
and planned course of production against the random disturbance of running out
of materials or goods. The scope of inventory management also concerns the
fine lines between replenishment lead time, carrying costs of inventory, asset
management, inventory forecasting, inventory valuation, inventory visibility,
future inventory price forecasting, physical inventory, available physical space
for inventory, quality management, replenishment, returns and defective goods
and demand forecasting. Balancing these competing requirements leads to
optimal inventory levels, which is an on-going process as the business needs
shift and react to the wider environment.
COMPANY BRIEF: Grasim has a strong presence in fabrics and synthetic
yarns through its subsidiary, Grasim Bhiwani Textiles Limited, and is well
known for its branded suitings, Grasim and Graviera, mainly in the polyester -
cellulosic branded menswear. Its textile plants are located at Bhiwani
(Haryana) and Malanpur (Madhya Pradesh). Fabric operations are centralised
at Bhiwani with a processing capacity of 17.0 million metres a year, while the
Malanpur unit manufactures worsted dyed yarn spun from 100 per cent merino
8
wool along with polyester and other blends.
Grasim's strong nationwide retail network includes 50 exclusive showrooms as
well as 200 wholesalers and 25,000 multi-brand outlets through which it reaches its
customers. Grasim caters to international fashion houses in the USA and UK
supplying fabric to them for manufacturing of garments, which are available in
some of the largest retail chain stores.
NEED OF THE PROJECT: In this competitive market, it is must for any
business to have the best plan for its inventory. The best planned and managed
inventory serves as a ground work for the marketing.
There are three basic reasons for keeping an inventory:
Time : The time lags present in the supply chain, from supplier to user at every
stage, requires that you maintain certain amount of inventory to use in this "lead
time".
Uncertainty : Inventories are maintained as buffers to meet uncertainties in
demand, supply and movements of goods.
Economies of scale : Ideal condition of "one unit at a time at a place where user
needs it, when he needs it" principle tends to incur lots of costs in terms of
logistics. So bulk buying, movement and storing brings in economies of scale,
thus inventory.
Thus inventory planning and management is required for the efficient on going of
the business.
9
OVERVIEW OF THE GRASIM INDUSTRY
The Aditya Birla Group is a multinational corporation based in Mumbai, India
with operations in 25 countries.
A US$ 28 billion conglomerate, with a market capitalization of US$ 31.5 billion,
over 50 per cent of its revenues flow from its operations across the world. The
group is a major player in all the industry sectors it operates in. The Group has
been adjudged the best employer in India and among the top 20 in Asia by the
Hewitt-Economic Times and Wall Street Journal Study 2007. The origins of the
group lie in the conglomerate once held by one of India’s foremost industrialists
Mr. Ghanshyam Das Birla. He bequeathed most of these companies to his
grandson, Mr. Aditya Vikram Birla – the father of the current chairman of the
group, Mr. Kumar Manglam Birla.
Grasim Industries Limited, a flagship company of the Aditya Birla Group, ranks
among India's largest private sector companies, with consolidated net turnover of
Rs.184 billion and a consolidated net profit of Rs.22 billion (FY2009).
Starting as a textiles manufacturer in 1948, today Grasim's businesses comprise
viscose staple fibre (VSF), cement, chemicals and textiles. Its core businesses are
VSF and cement, which contribute to over 90 per cent of its revenues and
operating profits.
10
The Aditya Birla Group is the world’s largest producer of VSF, commanding a 23
per cent global market share. Grasim, with an aggregate capacity of 333,975 tpa
has a global market share of 12 per cent. It is also the second largest producer of
caustic soda (which is used in the production of VSF) in India.
In cement, Grasim along with its subsidiary UltraTech Cement Ltd. has a capacity
of 45.7 million tpa as on 30 June 2009 and is a leading cement player in India. In
July 2004, Grasim acquired a majority stake and management control in UltraTech
Cement Limited. One of the largest of its kind in the cement sector, this
acquisition catapulted the Aditya Birla Group to the top of the league in India.
VISCOSE STAPLE FIBRE
Grasim is India's pioneer in Viscose Staple Fibre (VSF), a man-made,
biodegradable fibre with characteristics akin to cotton. As an extremely versatile
and easily blendable fibre, VSF is widely used in apparels, home textiles, dress
material, knitted wear and non-woven applications.
Grasim's VSF plants are located at Nagda in Madhya Pradesh, Kharach in Gujarat
and Harihar in Karnataka, with an aggregate capacity of 333,975 tpa.
CEMENT
Grasim ventured into cement production in the mid 1980s, setting up its first
cement plant at Jawad in Madhya Pradesh and since then it has grown to become a
leading cement player in India.
Grasim’s cement operations today span the length and breadth of India, with 11
composite plants, 11 split grinding units, four bulk terminals and 64 ready-mix
concrete plants as on 30 June 2009.
11
Leveraging the strong equity and goodwill of the house mark, the company has a
strong national brand UltraTech cement under the Aditya Birla Group logo.
Grasim is also nurturing some regional brands like Vikram Cement and Rajashree
Cement.
Grasim is one of the largest ready mix concrete (RMC) players in India. RMC
business is in a rapid growth phase. The company has consolidated capacity of
11.31 million cubic meters with the network of 64 plants as on 30 June 2009.
Grasim is also the largest producer of white cement in India, with a capacity of
560,000 tpa as on 30 June 2009. Branded as "Birla White",
white cement division manufactures world-class white cement
in a variety of textures and finishes. It has applications in
floorings and exterior wall finishes, apart from other innovative
uses. The division also manufactures value added products like putty, GRC etc.
which are used in wall finishing and various architectural applications.
CHEMICALS
Rayon grade caustic soda is an important raw material in VSF production. To
achieve a reliable and economical supply of this chemical, Grasim set up a rayon
grade caustic soda unit at Nagda in 1972, with an initial capacity of 33,000 tpa.
This has since grown to 258,000 tpa, making it the country's second largest caustic
soda unit.
TEXTILES
Rayon grade caustic soda is an important raw material in VSF production. To
achieve a reliable and economical supply of this chemical, Grasim set up a rayon
grade caustic soda unit at Nagda in 1972, with an initial capacity of 33,000 tpa.
12
This has since grown to 258,000 tpa, making it the country's second largest caustic
soda unit.
It uses cost-effective membrane cell technology and is 100 per cent self-sufficient
in power. For gainful utilisation of chlorine, the unit has expanded its operations
with the production of stable bleaching powder (SBP) used in water purification,
sanitation and as a bleaching agent; poly aluminium chloride (PAC) used in water
treatment, paper sizing and effluent treatment; and chloro sulphonic acid, used in
vinyl sulphate, the raw material for dyes and intermediates, saccharin, drugs and
pharmaceuticals, etc.
Grasim Bhiwani Textiles Ltd. (GBTL) is a subsidiary of GIL, AB group. It has
strong nation wide presence in fabrics and is well known for its branded suitings,
shirtings and ready made garments.
The brand has grown at 10-15% consistently over the last 3 years. It commands a
market share of 22% in a PV branded menswear fabric market.
13
VISION
"To actively contribute to the social and economic development of the
communities in which we operate. In so doing, build a better, sustainable
way of life for the weaker sections of society and raise the country's
human development index."
— Mrs. Rajashree Birla, Chairperson,
The Aditya Birla Centre for Community Initiatives and Rural Development
MISSION
To deliver superior value to our customers, shareholders, employees and
society at large.
VALUES
Integrity
Commitment
Passion
Seamlessness
Speed
14
DISTRIBUTION CHANNEL
Brand Grasim reaches out to the consumers through a robust distribution
channel of around 100 dealers, 15000 MBO’S and 70 Exclusive showrooms.
Brand Grasim’s retail foray has been lined up along with it’s commitment to
bring innovative products, international styles and designs at very affordable
prices to customers. Brand Grasim already enjoys huge acceptance and
popularity across the country due to its innovative and customer oriented
offerings.
A WORLD OF OPPORTUNITY
The showrooms will offer products in various blends like PV/PC/CVC/100%
Cotton/PW/PMW. Also on offer would be speciality products for the
exclusive showrooms like Lenin, Tweeds and Corduroy Suitings, Designer
Shirting with Prints & Embroidery etc. and exclusive range of shirting and
ready-mades to complement the entire line of menswear.
GRASIM RETAIL IDENTITY
15
The retail identity of GRASIM EXCLUSIVE SHOWROOM aims to establish
a “formal menswear wardrobe destination” for a 30+ urban customer of tier
2/3/4 town, who is :
A careful spender
One who affordable fashion
Strong on middle-class value system
High on self-worth and self-esteem
Keen to make a mark for himself
A SELF MADE MAN
16
MANAGEMENT TEAM
BOARD OF DIRECTORS
:: Mr. Kumar Mangalam Birla, Chairman
:: Mrs. Rajashree Birla
:: Mr. M. L. Apte
:: Mr. B. V. Bhargava
:: Mr. R. C. Bhargava
:: Mr. Y. P. Gupta
:: Ms. Cyril Shroff
:: Mr. S. G. Subhrahmanyan
:: Mr. Shailendra K. Jain (Whole-time Director)
:: Mr. D. D. Rathi (Whole-time Director)
:: Mr. S. B. Mathur (w.e.f. 28 January 2005)
BUSINESS HEAD
17
:: Mr. Shailendra K. Jain, viscose staple fibre
:: Mr. Saurabh Misra, cement
:: Mr. Ravi Kastia, sponge iron
:: Mr. S. K. Saboo, textiles, spinning
:: Mr. Vikram Rao, textiles, fabrics
:: Mr. K. K. Maheshwari, chemicals
WHOLE-TIME DIRECTOR AND CHIEF FINANCIAL OFFICER
:: Mr. D. D. Rathi
COMPANY SECREATORY
:: Mr. Ashok Malu
18
THE BRAND LOGO
A MARQUE OF EXCELLENCE
The name "Aditya Birla" evokes all that is positive in business and in life. It
typifies integrity, quality, performance, perfection, and above all, character.
Our corporate logo, 'The Rising Sun', symbolizes these traits. ('Aditya' is the
Sanskrit word for sun).
The logo consists of an inner circle, symbolizing the internal universe of the
Aditya Birla Group, an outer circle, symbolizing the external universe, and a
dynamic meeting of rays converging and diverging between the two.
Grasim is a major brand in the Rs 2500 crore Ready to Stitch market. The
brand which had its existence since 1957 .Grasim is a major player in the Rs
2500 crore Ready to Stitch textile segment.
19
Grasim has repositioned itself. The brand was earlier positioned as a Modern
Fashion Brand. The positioning was reinforced by a series of new fiber
launches. The collections like Aqua Soft, Ice Touch etc kept the brand in the
limelight. The brand used the tagline "Power of Fashion" to convey the
positioning. Now the brand has changed its positioning. Grasim has roped in
the Bollywood Super hero Akshay Kumar as the brand ambassador. The
tagline has been changed to "For the Self Made". The TVC featuring the
actor is now on air.
20
THE GRASIM BRAND AMBASSADOR
The Grasim brand already enjoys huge acceptance and popularity across the
country due to its innovative and customer-oriented offerings. To bolster its
brand presence, the company has roped in bollywood actor Akshay Kumar.
Akshay Kumar is not only the bollywood superstar but he is the self made
man. His personality matches with the brand as the Grasim has also raised
itself on its own.
21
PRODUCT LINE
Grasim's products include viscose staple fibre (VSF), grey cement,
white cement, chemicals, sponge iron and textiles.
:: VSF
:: CEMENT
:: CHEMICALS
:: TEXTILES
Product
Installed capacity (as on 30 June 2009)
Viscose staple fibre 333,975 tpa
VSF, joint venture — Birla Jingwei Fibres Company
Limited35,000 tpa
Grey cement (Incl. UTCL) 45.65 million tpa
White cement 560,000 tpa
Ready-mix concrete plants (64) (Incl. UTCL) 11.31 million cubic metres
Chemicals 258,000 tpa
Textiles (Yarn) 8832 spindles
Textiles, subsidiaries — Grasim Bhiwani Textiles
Ltd. (Fabric)148 looms
Textiles, subsidiaries — Grasim Bhiwani Textiles
Ltd. (Yarn)35,808 spindles
22
1. VISCOSE STAPLE FIBRE:-
The Aditya Birla Group is the world's largest producer of VSF,
commanding a 24 per cent global market share. The company
meets over 98 per cent of India's domestic VSF requirements.
2. CEMENT:-
The Aditya Birla Group is the 11th largest cement producer in
the world and the seventh largest in Asia.
3. SPONGE IRON:-
It is the largest merchant producer of sponge iron in India.
4. CHEMICALS:-
Grasim has India's second largest caustic soda unit.
5. TEXTILES:-
Its premium brands, the 'Grasim' and 'Graviera' range of
fabrics, have distinctively positioned themselves as 'the
power of fashion'.
All of Grasim's units have earned ISO 9002 and 14001
certifications.
Product quality, innovation and eco-friendliness are a
hallmark of all the company's divisions.
23
PREMIUM BRAND OF GRASIM SUITINGS
UNCRUSHABLES
PURISTA
CLEANFAB
ICETOUCH
FINESSEE
STRETCH
FREEDOM
24
GRASIM SUITINGS AND GRAVIERA SUITINGS
ICE TOUCH
One of the most successful innovations of Grasim in the past couple of years
is ‘ICETOUCH’. Ice Touch is a pioneer and continues to hold its preeminent
position in moisture management based products in India. This product is well
accepted all over India continues to be the market leader.
This product is based on Japanese technology. Grasim have collaborated to
and innovated its use on Polyester Viscose blended fabrics to adapt this
product to the Indian conditions and the Indian consumer.
The unique properties of ‘ICE TOUCH’ are its instantaneous absorption of
water, spreading of the same over a large surface area and its quick
evaporation. When you sweat the liquid is quickly absorbed by the fabric and
evaporated. When this liquid evaporates it takes heat from the inside of the
fabric and thereby giving the wearer a very cool feeling.
Ice Touch is a specially engineered product produced from selected fabric
constructions using innovative processing routines along with the aforesaid
technology to get a wonderful handle and feel coupled with the above
25
properties. Ice Touch provides cotton like comfort and PV like drape and
wears properties.
In short ICE TOUCH is a unique range of fabrics possessing excellent handle,
feel and drape along with extraordinary moisture absorption and evaporation
giving a very cool and icy feeling.
CLEANFAB:-
CLEAN FAB is one of the most recent in-house innovations of Grasim
Industries. This is a functional Polyester Viscose blended fabric in which for
the first time dust free and soil free concept has been introduced. This fabric is
ideally suited for the dusty atmosphere and environment prevalent in most
parts of the country for most of the year.
Generally soiling and soil release is a serious problem when hydrophobic
fibers (like polyester) are blended with cellulosic fibers (like cotton , viscose
etc.) since these hydrophobic fibers attract soil to a greater extent and release
the soil less readily during laundering.
In short CLENFAB is the ultimate product in terms of giving good comfort
along with the soil prevention and easy soil release properties.
UNCRUSHABLES:-
Uncrushables is a low crush fabric, first winter poly-wool fabric with anti-
wrinkling quality to be launched in the industry.
26
While no fabric is ever 100% wrinkle free, Uncrushables is far superior to
other competitive products with better crease recovery. The fabric is easy to
wash and care of. Meant for the hard and rugged life indoors or outdoors, it is
available in 15 colors.
FINESSE:–Fine Fabric for Fine People
One of the most comfortable trousers made out of fine yarn. The fabric has a
finer count which lends itself to luxurious feel and handle. It is ideal for night
wear, party wear and outdoors.
Finesse is very easy to maintain and can be washed easily and carries a very
elegant shape and drape all day long.
The fabric provides greater comfort like cotton and comes in some of the most
exotic colors blue, black, beige, limestone, graphite and grey.
27
MAIN UNITS OF GRASIM INDUSTRIES
Viscose Staple Fibre
Nagda(M.P.)
Rayon Grade Pulp
Mavoor (Kerela)
Hariar Poly Fibres
Karnataka
Rayon Grade Caustic Soda
Nagda (M.P.)
Vikram Cement
Jawad (M.P.)
28
Vikram Iron &Steel (Sponge Iron)
Maharashtra
Grasim cement
Raipur (M.P.)
Graviera & Grasim Suiting
Bhiwani (Hry.)
Elegant Spinners
Bhiwani (Hry.)
Vikram Ispat
Raigarh (M.P.)
Aditya Cement
Shambhupura
Birla Telecom Ltd. & Birla Communication Ltd.
Mumbai
Ultra Tech Cement
South Hydrabad
29
STRATEGIES OF BTM
(BHIWANI TEXTILES MILL)
Strategies are key to achieve objective. Every company must
have set strategies through which it achieves its objective.
B.T.M. has also its well defined strategies which is
Implemented in all the three levels. The strategies are:-
30
World Class Manufacturing
Birla Management Centre
Quality Circles
5-S ( a house keeping practice )
Total Quality Management (TQM)
Participative Management
1. WORLD CLASS MANUFACTURING(WCM)
In order to delight customers, employees, stakeholders and to
become a
successful competitor in global market, Aditya Birla Group has
evolved and
promoted this top rank methodology of W.C.M. to sustain
excellence in
company wise performance. This is multidimensional viz.
waste elimination,
5-S, JIT, TPM System & Cash Flows.
2. BIRLA MANAGEMENT CENTER (BMC)
Philosophy behind its logo: The philosophy of BMC is
beautifully capture in its symbol.
The logo has been designee to reflect concept of group dynamics and group
Synergy, six symbolic person, one is dark blue and five is light blue denote
one group, all fusing their energies and knowledge to form a strong nucleus.
31
3. QUALITY CIRCLES
Quality is match word of the unit. It is not imposed by checks
and counters
Checks. It is a part of total manufacturing system. Quality is
first parameter.
Again in order to maintain a superior quality of the product
various
Management practices and being carries out by top
management. Quality
Circles meetings have been formed by the top management
with a view to
Increase the involvement and responsibility in their individual
work areas.
After completion of the Project, award by way of recognition
are given to all
The quality circles team members.
4 .5-S (A HOUSE-KEEPING MANAGEMENT)
Good quality management producers can prosper only in clean and serene
Atmosphere an so the top management at BTM have implemented the 5-S
Technique(related to the wok environment).
32
Seiri Sorting out unnecessary
items.
Seiton Systematizing necessary
items.
Seison Sweeping of work place
and machines.
Seiketsu Sanitizing.
Shitsuke Self disciplining
5. TOTAL QUALITY MANAGEMENT (TQM)
Today’s executive view the task of improving product and service quality as
their top priority. Most customers, whether they are internal or external will
no longer accept average quality performance. If company wants to stay in
they have no choice but to adopt TQM.
Because of this strong quality consciousness of BTM, in 1994 Graviera
was
awarded the prestigious ISO 9002 so certification. Each
process from buying the fiber to the finished fabric monitored
by the computerized machines, highly observant workers and
technicians.
33
COMPETITORS ANALYSIS
Which brand comes into your mind when you go for buying a
fabric.
raymond
wills life style
van hussain
wrangler
allen solly
allen cooper
john player
arrow
levis
dockers
peter england
flying machine
reid & taylor
koutons
louis philips
provogue
raymond
wills life style
van hussain
wrangler
allen solly
allen cooper
john player
arrow
levis
dockers
peter england
flying machine
reid & taylor
koutons
louis philips
provogue
34
The graph conveys that Grasim lags behind many brands in the brand recall.
36% consumers prefer Raymond & their sub brands like Parx, Park Avenue
over other brand. It shows that brand of the Raymond are very strong over
the other brands. Levis, Van husain, Peter England, John players are the other
brands which consumer prefer while buying fabric or garment.
SWOT ANALYSIS OF BTM
STRENGTHS:-
1. BTM is a composite firm in Haryana.
2. BTM is a financially sound firm.
3. Working environment is peacefully (Union is strength
principle
is followed)
4. Facilities given to employees & employers on time and upto
date.
5. Viable stand with wholesellers.
6. Developed our own niche in market.
WEAKNESS:-
35
1. The distribution of Grasim is not much strong.
2. Retailers have developed reluctance for Grasim because
of rucks created by wholesalers in their variegated
discounting schemes.
3. Grasim lacks a merchandiser to look after the product
mix and pricing.
4. Marketing and visibility needs inertia of motion.
5. It needs more promotional strategies for RMG section..
OPPORTUNITIES:-
1. Given chance to Grasim to make & sale its product
providing them manpower, machine, money, market,
material.
2. In near future Grasim will start with accessories.
3. Diversification in attention required from wholesalers to
retailers.
4. Grasim can be more rigorous in introducing the sub-
brands with whole new quality and designs.
THREATS:-
1. BTM face threats from its competitors like Vimal , ocm ,
Siyaram , Raymonds
36
2. BTM face in overseas market like Phillipines , Malaysia ,
Canada , Mexico
HR POLICIES
1.Basic HR Policies
2.Compensation and benefits policies
3.General HR policies
4.Job analysis and Evaluation
5.Learning and development
6.Organizational effectiveness
7.Talent management
8.Talent staffing (policies related to recruitment)
37
Part -B38
ABOUT THE PROJECT
Good inventory control is critical to ensuring an adequate level of stock on
hand for the amount of sales being generated. Having too much inventory (or
the wrong type) during certain periods can slow the cash flow and reduce
profits with too many markdowns i.e, there can be planned reduction in the
selling price of an item, usually to take effect either within a certain number of
days after seasonal merchandise is received or at a specific date.
On the other hand, if you under buy and miss sales opportunities then you are
not making your potential profit. So the proper planning for the inventory is
inevitable.
The present project is to identify the optimum stock level by taking into
consideration the sales and demand per year, present stock quantity available
and the storage capacity for all the forty consignment stores of Grasim in
India.
39
For every store maximum stock level, minimum stock level and optimum
stock level has to be maintained. Maximum stock level is the stock that needs
to be maintained to ensure cost effectiveness. Minimum stock level refers to
the point below which the stock level may not go. Optimum level is the level
which is sufficient for a store to maintain its working capital.
Optimum level is required to avoid the working capital blockage. The
working capital blockage came through deadstock.
Dead stock is the old store item that is unused and never sold. Sometimes
referred to as NOS (never off shelf). Often come with original packaging,
tags, etc. These items may further be called "new old stock".
When such stock is created than company takes the stock correction plan in
which it redefine the stock quantity and stock value.
40
LITERATURE REVIEW
A retailer utilizes inventory management to acquire and maintain a proper
merchandise assortment while ordering, shipping, handling, storing,
displaying and selling costs are kept in check. First a retailer places an order
based on a sales forecast or actual customer behavior. Both the number of
items and their variety are requested in ordering. Order size and frequency
depend on quantity discounts and inventory costs. Second, a supplier fills the
order and sends merchandiser to a warehouse or directly to the store(s).
Third, the retailer receives products, makes items available for sale, and
completes customer transactions. The cycle starts a new when a retailer
places another order.
Techniques to plan inventory levels are the basic stock, percentage variation,
quarter’s supply, and stock to sales methods.
With the basic stock method, a retailer carries more items than it expects to
sell over a specified period. There is a cushion if sales are more than
41
anticipated, shipments are delayed, or customers wants to select from a variety
of items.
Basic stock (at retail) = Average monthly stock at retail- Average monthly
sales.
Beginning of month planned inventory level = Planned inventory sales + basic
stock
In the percentage variation method, beginning of month planned inventory
during any month differs from planned average monthly stock by one half of
that month’s variation from estimated average monthly sales. This method is
recommended if stock turnover is more than six times a year or relatively
stable, since it results in planned inventories closer to the monthly average
than other techniques.
Beginning of month planned inventory level= Planned average monthly stock
at retail * 1/2[1 + (estimated monthly sales/ estimated average monthly sales)]
The week’s supply method forecasts average sales weekly, so beginning
inventory equals several week’s expected sales. It assumes inventory is in
proportion to sales. Too much merchandise may be stocked in peak periods
and too little during slow periods:
Beginning of month planned inventory level = Average estimated weekly
sales * Number of weeks to be stocked
With the stock to sales method, a retailer wants to maintain a specified ratio
of goods on hand to sales.
42
RESEARCH METHODOLOGY
PROBLEM RECOGNISED:
1. Creation of dead stock and lack of optimization of stock at various
stores.
2. The designs which are in demand in the market are not supplied to the
store on time.
43
APPROACH TO THE PROBLEM:
Techniques to plan inventory levels are the basic stock, percentage variation,
quarter’s supply, and stock to sales methods.
With the basic stock method, a retailer carries more items than it expects to
sell over a specified period. There is a cushion if sales are more than
anticipated, shipments are delayed, or customers wants to select from a variety
of items.
Basic stock (at retail) = Average monthly stock at retail- Average monthly
sales.
The process of inventory planning is a step-by-step process. The various
processes which are related to inventory are as:
PROCESS OF TAKING PURCHASE ORDERS AT STORE END
44
These purchase orders are taken at the store end. Now the store managers send these orders to Bhiwani, the manufacturing plant.
Sampling is done. Square sample of different types of fabrics are cut from inner side of thans and code number and rate per meter is written.
The party selects the sample as per their requirements and send the order.
45
These samples are sent to the different parties (trade partners).
The purchase order has to be taken from the party.
PROCESS OF TAKING BOOKING ORDERS AND
SHIPMENT AT BHIWANI
Sampling in conference is done. First it is decided which samples are to be shown to the trade partners.
Selected samples that is called LE (latest estimation) are then taken.
Then booking orders of the same is taken.
46
Then compilation of the order is done in national label.
The order is passed away to the production team. Example 1000 meter in this particular quality(fabric) is needed.
This is how whole process of taking orders and booking and dispatching of
stock takes place at Bhiwani.
Before showing to the trade partners sampling in conference is done in which
it is decided which samples are to be shown to the clients. Then selected
samples called latest estimation are taken. The booking orders of the same is
then taken and compilation of the order in national label is done. After this
order is passed away to the production team according to the demand. The
production team take 30-45 days to deliver the order. Then it is sended to
folding department for grading like 12 meter than, 12.5 meter than. After this
47
The production team takes 30-45 days to deliver the ordered quantity.
Then it is sended to folding department for grading like 12 meter than, 12.50 than
After grading it is sent to warehouse. The warehouse is at Bhiwani.
Then for selling the stock is dispatched to different stores through transport.
The company takes quarter wise booking or three months advance booking.
all the stock is sent to warehouse at Bhiwani and from there it is dispatched to
different stores through transport. The transport takes 15 days and through
courier it takes 5 days. The company takes quarter wise booking or three
months booking in advance.
INVENTORY PLANNING FOR THE NEW STORES
For the new stores following steps are taken:
1. The focus is on the area where the store has to be open.
2. If it is not the tear 1 town, then retail space of 300-400 square feet is to
be found out.
3. Then franchisees are asked that at what price point they can sell in this
market. They give the better idea of pricing.
4. Then company sends 170-200 thans accordingly.
5. The focus is to display all the varieties and all available collection.
6. The company sends the replenishment quarterly.
48
BASIC FIXED ORDER QUANTITY MODEL AND
REORDER POINT BEHAVIOR
This model sometimes called Production Order Quantity Model. In the basic
model we have assumed that the entire inventory, which is ordered, arrives
R = Reorder pointQ = Economic order quantityL = Lead time
L L
Q QQ
R
Time
Numberof unitson hand
49
simultaneously. However, this is not a valid assumption, because the vendor
delivers the order in partial shipment or portions over a period of time. In the
case of GBTL, the replenishment is done quarterly, the whole stock is sent at
once.
In such cases inventory is being used while new inventory is still being
received and the inventory does not build up immediately to its maximum
point. Instead, it builds up gradually when inventory is received faster than it
is being used; then it declines to its lowest level as incoming shipments stop
and the use of inventory continues. This version of the EOQ model is also
referred to as the “Gradual Usage Model ” and “Production Lot Size Model”.
In this, noninstantaneous receipt model, the order quantity is received
gradually over time, and the inventory level is depleted at the same time it is
being replenished.
GBTL uses fixed order quantity model as it replenishes the stock quarterly in
a certain fixed ratio. But for the stores where the stock value is high and
already the problem of over stocking is existing, the company avoids the
replenishment. If the replenishment of the stock is required in such stores
than the old stock is sell out through discount schemes. And then the stock
correction is done.
GBTL also follows the Just-in-time plan as the stock is also dispatched
according to the demand created. If certain store requires certain quantity in
particular shade and variety and if its available in the warehouse than it is
courier to that store and hence just-in-time process is also followed.
50
PRIMARY RESEARCH:
Primary research is the basic market research which helps to know the current
trends. It helps to get the real picture of the sector we are reaching for.
For our primary research we had the tools as:-
Questionnaire (affixed in the annexture)
Brainstorming with store managers.
The primary research helped to know the existing problems in the stores.
Through brainstorming with the store managers the reasons for the dead stock
and the reasons for the lack of variants which are in demand in the market
came out. These problems affects the sales of the store and hence the profit of
the company. The survey which is conducted is a telephonic survey. The
company maintains the stock and sales data through a software called shopper
9.
51
SECONDARY RESEARCH:
The secondary research is basically getting important information from a lot
of data stored in the books and different sites. Secondary research enabled me
to get a view about the textile and garment industry and the inventory
management processes. It gives the idea about how to maximize control over
operations and inventory in order to better service customers.
There are various processes or models that our followed while maintaining
and planning the inventory called inventory model. For eg. Fixed order
quantity model, Fixed time period model, Just in time model.
Different industries uses different software and the models that suits their
business.
52
SAMPLE SIZE:
The sample size for this is the focus group of 40 respondents. These 40
respondents include the store managers of the various Grasim stores exclusive
and franchisee across the country.
DATA COLLECTION:
The data was collected through the telephonic survey. The questions were
open ended so as to get the better insight of the store issues. A study was
conducted in which all the stores were covered to know the present stock data
and sales data and compared to the storage capacity available.
53
DATA ANALYSIS
There are three sections in every store, these are suiting section, shirting
section and RMG section. The layout and elevation plans of all the stores
are provided. Layout plan is the map of the store when seen from the roof
or top. Elevation plan is the front view of any section. Each plan is divided
into three section AA’, BB’ and CC’ depicting the suiting, shirting and
RMG section respectively (shown in annexure).
These maps help to find out the storage capacity in a store. There are two
kinds of shelves available for suiting racks, these are upper vertical shelves
and lower horizontal shelves. The upper vertical shelves are visible to the
customers but the lower horizontal shelves are hidden due to the counters
and the seating arrangements.
For every store the maximum stock level, minimum stock level and
optimum stock level has to be maintained. The maximum stock level is
achieved when the entire shelves are required to be filled i.e, the entire
storage capacity is fulfilled. The minimum stock level is the stock that is
filled only to those shelves which are displayed and visible to customers.
In the vertical big shelves the thaan patties are kept vertically or
54
standing rolls are kept while in the lower shelves the thaan patties are
placed horizontally. The optimum level is also needed to be defined.
Optimum level is the level which is sufficient for that store to maintain its
working capital. There should be no working capital blockage. The
working capital blockage comes through deadstock.
55
1. ALLAHABAD STORE
0
10
20
30
40
50
60
70
suitingstock
sellthrough
shirtingstock
sellthrough
rmgstock
sellthrough
allahabad stock and sales analysis
Series1
Inferences:
Out of total stock suiting stock is 52.59% and sales is 48.34%
The ratio of sales to stock value that is sell through is 49.60%
This shows that sales of suiting are half of the total sales and also the
sales value is half of the stock value of suiting section.
Out of the total stock the shirting stock is one fourth and sales is
27.12% but the sales value is 60% of stock value.
RMG stock is 20% and sales is one-fourth but the sales value is 60%
of the RMG stock value.
56
2. BELGAUM STORE
0
20
40
60
80
100
120
140
160
suitingstock
sellthrough
shirtingstock
sellthrough
rmgstock
sellthrough
Series1
INFERENCES:
The suiting stock is 58% of the total stock and sales is 54% of the
total sales and the sales value in ratio to stock value of suiting is
78%.
The shirting stock is only 13% and its sales out of total is one-fourth
that is 25% but the sales value to stock value ratio is 155%
RMG stock is 27% and sales is 21% and the sell through that is sales
value to stock value of RMG is 65%.
57
3. BHILWARA STORE
0
10
20
30
40
50
60
70
suitingstock
sellthrough
shirtingstock
sellthrough
rmgstock
sellthrough
Series1
INFERENCES:
The suiting stock is 63.24% and sales is 39% but the sales value in
relation to stock value is only 11.45%
The shirting stock and sales is one-fourth of total stock and sales and
the sales value to stock value is 19%.
The RMG stock is only 9% of total stock and sales is 30% but the
ratio of sales value to stock value is 66%.
58
4. GHAZIABAD STORE
0
10
20
30
40
50
60
70
80
90
100
suitingstock
sellthrough
shirtingstock
sellthrough
rmgstock
sellthrough
Series1
INFERENCES:
The suiting stock is 71% of total stock and sales is 57% and the ratio
of stock value to sales value is 35%
The shirting section contains stock of only 17% of total stock and
sales of 18.26% but sell through is of 45.88%
RMG is 11.46% of total stock and sales is 24.71% of total sales
59
5. GORAKHPUR STORE:
0
10
20
30
40
50
60
70
80
suitin
g stock
suitin
g sales
sell t
hroug
h
shirt
ing sto
cksh
irting
sales
sell t
hroug
h
RMG st
ock
RMG sa
lesse
ll thr
ough
Series1
INFERENCES:
The suiting stock is 63.72% of total stock and sales is 51% of total
sales
The ratio of stock to sales value of suiting section is 34%
The shirting stock is 17% of total stock and sales is 30.46% of total
sales
The ratio of stock to sales value of shirting section 75.70%
RMG stock is 19.34% of total stock and sales is 17.8% of total sales
The ratio of stock to sales value of RMG section is 39%
60
SYNOPSIS:
1. The stock and sales analysis of any store or the asset turnover which is the
performance measure based on retailer’s net sales and a total asset reveals
the current status of assortment.
2. The average stock division in any of the store is suiting is 60%, shirting is
25% and RMG is 15%.
3. In suiting section the product mix includes 100% cotton-C, Synthetic PM,
Synthetic PV, Worsted PM, Worsted PV, Worsted PW.
4. The highest stock and sales is of Synthetic PV in most of the stores.
5. The sales of suiting section of the stores like C.P. is 80% while that of
Barabanki, Bhilwara is around 35%
6. There is great variation in asset turnover in suiting section. In stores like
ahemdabad 2 the sales to stock ratio is 0.72 %, likewise in Barabanki and
Kolkata garia the asset turnover is below 10%.
7. While in certain showrooms like that of Bhiwani, Bhubneshwar, Pune,
C.P.1, Shahdara the turnover for suiting section is above 100%.
8. The shirting stock at certain stores is below 15% like that of belgaum,
c.p.1, jabalpur, lajpat nagar.
9. The sales at these stores is also low below 30% of total sales
10. For RMG the stock% is less than 10% for Bhilwara, Ganganagar,
Mumbai.
11. The asset turnover in RMG is 0.82% ahemdabad while 94.32% in
Ghaziabad.
61
DIAGRAMATIC REPRESENTATION OF INVENTORY
MANAGEMENT PROCESS
62
Inventory Model data flow diagram is shown above.
This basically helps us to precisely understand the flow of information in a
system and point out the exact stage/personnel/department responsible for a
particular process at any given time.
Some common symbols used are:
Circles represent processes
Cylinders represent information data stores
Rectangles show a resource
Rhombus is used to show a gate process
Arrows show the direction of data flow.
As shown in the above diagram, the process is initiated when the customer
places an order. Here the data would consist of details like number of items,
delivery dates, shipment details etc. Then the inventory is checked where
again data is fed from a data store. This data store (1) keeps a record of the
historical data. The data store (1) also has input from data store (2) which
keeps the warehouse records like inventory levels, location etc.
The inventory is checked for availability, which is a gate process. If there is
availability, then the item is retrieved and the shipment is scheduled. The
customer receives the item and provides feedback, which again goes into data
store (1). If enough inventory is not available then Reorder placement is
done. A lot of factors are to be considered for the reorder placement.
63
Looking at the bottom of the diagram, it can be seen how the model is
determined. Input from data store (5) goes into the SKU classification
process. The key factors that are considered are volume flow rate, size etc.
This SKU classification influences the type of model that is to be used for that
SKU. The demand patterns are also considered and are fed into data store (6),
which also determines the model to be selected. After the model is
determined, the EOQ and reorder points are set. Various factors like lead-
time and back order costs are considered and then the reorder placement is
done.
This DFD shows the exact information flow in the system, which can help
recognize the individual processes and the data transfer associated with it.
64
SUITING SECTION
RMG SECTION
65
Part -c
66
KEY LEARNING’S / CONCLUSION
All the Grasim Showrooms caters the middle class customers.
The fabrics are available in the form of thaan patties of 12 meter or
12.5 meter grading, rolls, bookfolds and combo packs.
In certain showrooms bookfolds are not in much demand as the
customers perceives that they are not the fresh pieces as it get the
dirt and dust stuck on the folds and thus creates marks and creases.
The company use to send the stock on the quarter basis in certain
fixed ratio.
This is to display and make available all the qualities and range of
fabrics of Grasim to the customers.
But this some time create deadstock as all the varities or range are
not in demand and as the stock replenishment is on the quarter basis
so it sometimes creates understocking.
Customer demand is on the basis of quality and range(pricing) and
hence the fabric is arranged on the shelves on the basis of quality
and range.
The assortment display plays very important role in capturing the
interest of the customers.
The higher priced range fabric are in the starting shelves of the store
and the lower priced range are towards the end of the store. This
give ease to the seller to show the customer their product.
67
Empty shelves gives the negative effect to the customers. So the
stock replenishment or the supply of demanded fabric should be
done on time. The distribution channel plays an important role in
this.
The process of sending the order to the production house starts from
taking the purchase order from the clients or trade partners.
The samples are sent along with the code number and rate per meter
to the party and then they select the samples which are in demand or
required.
The purchase order is made for the required samples.
The P.O. is then sent to the company where compilation of the latest
estimation (booking order) is done and then it is sent to the
production house.
The production team takes 30-45 days to deliver the order and then
it is sent to folding department for grading.
After grading the stock is sent to the warehouse at bhiwani, from
where it is distributed to the different stores.
Through transport it takes 15 days to dispatch the order.
The delivery is done to the respective client against cheque or cash
payment.
For every store the maximum, minimum and optimum stock level is
maintained.
Maximum stock is when entire shelf is required to be filled,
minimum stock is the stock required to fill those shelves which are
visible to the customers and are required for running the smooth
business.
68
In the front and big shelves the stock is placed vertically while in the
lower horizontal shelves the stock is places horizpntally. These
horizontal shelves are not visible to the customers.
The optimum level is that level which is required for that store to
maintain its working capital.
The working capital blockage comes through deadstock.
To minimize or optimize the stock the thaans of 12 meter can be cut
short to 6 meter so that the range is also available to the customers
and also the cost is reduced.
To attract the customers, visual merchandising is must. For this the
appropriate placing of digitals (brand logo and brand ambassadors
posters) is done.
In most of the store one Brand logo is at the back of the cash counter
and two or three in the front towards the side of the entrance
depending on the space and size of the showroom.
All the sales and stock data is maintained on the company software
called shopper 9.
The key issue in inventory planning is the designs which are in
demand in the market are not supplied to the store on time and the
company send the stock accord to its own percent criteria.
The store managers’ view is that the company should have a proper
catalogue and they should show the sample to the store manager or
merchandiser so that he can select the samples from that which are
required.
The level of inventory and sales for each item in every store branch
should be revealed. This improves the transfer of goods between
69
branches and alerts salespeople as to which branches have desired
products. Also less stock can be held in individual stores, reducing
costs.
70
RECOMMENDATION
To know the stock quantity and stock division there should be a
merchandiser who can look after the product mix, color palette and
price range.
There should be balance between the basic fixed order quantity
model and just-in-time model which is followed in the company. So
that the stock which is in demand should reach the store on time.
Grasim is suffering from weak distribution channel. The main
problem with the Grasim brand is that Grasim is not easily available
to customer. Customer wear that brand which are easily available to
them. So Grasim should increase their stores, showrooms in semi
urban areas.
Grasim is now in readymade garments also so Grasim need to open
their showrooms in the mall.
People do not know about the Grasim RMG so there is need to
increase the awareness about Grasim RMG.
Grasim enjoys the loyalty of the customers. Customers are satisfied
with Grasim in terms of quality but they are highly dissatisfied with
Grasim in terms of location of store, promotion, advertising.
71
ANNEXTURE-QUESTIONNAIRE
(To know the problems regarding the inventory planning and management
these questions were asked to the store managers telephonically)
NAME:
STORE NAME:
LOCATION:
CARPET AREA:
1. Software used to maintain stock and sales data________
2. For the suiting section how many shelves are available
i) Vertically________ ii) horizontally___________
3. What is the total number of thaans in suiting section is available in the
store?
____________________
4. In each shelf how many thaan pattis can be kept?
___________________
5. In what forms the fabric is available in suiting section?
i) thaan patties_______ ii) bookfolds_______ iii) rolls_______
6. In shirting section how many racks or shelves are available?
_________________
7. How many number of rolls in shirting section are available?________
72
8. Number of rolls in 58 inches _______ and in 36 inches _____________
9. Number of racks in RMG section ________________
10.Number of racks available for shirts _______________
11.Number of racks available for trousers ______________
12. Number of racks for suits and jackets ______________
13. Number of display hangers for RMG ______________
14. Number of central display unit( CDU) for RMG_____________
13. Total number of shirts available ____________
14. Total number of trousers available____________
15. Number of jackets available _________
16. Number of suit lengths available ___________
17. Number of combo packs available ___________
18. The sales of suiting section ________%
19. The sales of shirting section _______%
20. The sales of RMG section ________%
21. The time of replenishment of stock ________days/weeks/months
22. What is the lead time for the stock ________
23. What is the reorder point for suiting section _______
24. What is the reorder point for shirting section _______
25. What is the reorder point for RMG section _______
26. Customers demand is on the basis of
i) quality______ ii) price range______ iii) quantity range______
73
27. How much you are satisfied with the current inventory management?
i) satisfied_______ ii) neutral________ iii) unsatisfied__________
28. What are the key problems existing regarding the inventory management
in the store?
i)______________________________________________
ii)______________________________________________
iii)_____________________________________________
29. What are the probable solution to the problems listed above according to
you?
i)_______________________________________________
ii)_______________________________________________
iii)_______________________________________________
74
LAYOUT PLAN OF THE GRASIM SHOWROOM
75
ELEVATION PLAN FOR THE SUITING SECTION
76
ELEVATION PLAN FOR SHIRITING SECTION
77
ELEVATION PLAN FOR RMG
78
BIBLIOGRAPHY
WEBSITES:
www.adityabirla.com
www.udel.com
www.emeraldinsight.com
www.inventory-management.de/inventory management-354.htm
JOURNAL: Journal of business and retail management research
BOOKS:
Retail management: A strategic approach by Berman Barry and Evans.R. Joe
Integrated retail management by Wrice mark
79