ACI 104-71 Preparation of Notation for Concrete

ACI 116R-00 Cement and Concrete Terminology

ACI 117-90) Standard Specifications for Tolerances forConcrete Construction and Materials (ACI 117-90)

ACI 117R-90 Commentary on Standard Specifications for Tolerancesfor Concrete Construction and Materials

ACI 121R-98 Quality Management System for Concrete Construction

ACI 209R-92 Prediction of Creep, Shrinkage, and Temperature Effectsin Concrete Structures

ACI 210R-93 Erosion of Concrete in Hydraulic Structures

ACI 213R-87 Guide for Structural LightweightAggregate Concrete

ACI 214-77 Recommended Practice for Evaluation of StrengthTest Results of Concrete (ACI 214-77)*

ACI 215R-74 Considerations for Design of Concrete StructuresSubjected to Fatigue Loading

ACI 216_89 Guide for Determining the Fire �Endurance of Concrete Elements

ACI 221R-96 Guide for Use of Normal Weight andHeavyweight Aggregates in Concrete

ACI 222R-96 Corrosion of Metals in Concrete

ACI 223-98 Standard Practice for the Use of Shrinkage-Compensating Concrete

ACI 224R-90 Control of Cracking in Concrete Structures

ACI 225R-99 Guide to the Selection and Use of Hydraulic Cements

ACI 229R-99 Controlled Low-Strength Materials

ACI 233R-95 Ground Granulated Blast-Furnace Slag as aCementitious Constituent in Concrete

ACI 234R-96 Guide for the Use of Silica Fume in Concrete*

ACI 301-99 Specifications for Structural Concrete

ACI 301M-99 Specifications for Structural Concrete

ACI 303R-91 Guide to Cast-In-Place ArchitecturalConcrete Practice

ACI 304R-00 Guide for Measuring, Mixing, Transporting,and Placing Concrete

ACI 305R-99 Hot Weather Concreting

ACI 306R-88 Cold Weather Concreting

ACI 307-98 Design and Construction of Reinforced ConcreteChimneys (ACI 307-98)

ACI 307R-98 Commentary on Design and Construction ofReinforced Concrete Chimneys (ACI 307-98)

ACI 308-92 Standard Practice for Curing Concrete (ACI308-92)(Reapproved 1997)

ACI 309R-96 Guide for Consolidation of Concrete

ACI 313-97 Standard Practice for Design and Construction of Concrete Silosand Stacking Tubes for Storing Granular Materials (ACI 313-97)

ACI 313R-97 Commentary on Standard Practice for Design and Constructionof Concrete Silos and Stacking Tubes for Storing GranularMaterials (ACI 313-97)

ACI 315-99 Details and Detailing of Concrete Reinforcement

ACI 315R-94 Manual of Engineering and PlacingDrawings for Reinforced ConcreteStructures (ACI 315R-94)

ACI 318-99 BUILDING CODE REQUIREMENTS FORSTRUCTURAL CONCRETE (ACI 318-99) ANDCOMMENTARY (ACI 318R-99)

ACI 318M-99 BUILDING CODE REQUIREMENTS FORSTRUCTURAL CONCRETE (ACI 318M-99)AND COMMENTARY (ACI 318RM-99)

ACI318-02 BUILDING CODE REQUIREMENTS FORSTRUCTURAL CONCRETE (ACI 318-02) ANDCOMMENTARY (ACI 318R-02)

ACI 330R-92 Guide for Design and Construction of Concrete Parking Lots

ACI 332R-84 Guide to Residential Cast-in-Place Concrete Construction

ACI 343R-95 Analysis and Design of ReinforcedConcrete Bridge Structures

ACI 345R-91 GUIDE FOR CONCRETE HIGHWAY BRIDGE DECKCONSTRUCTION

ACI 346-90 Standard Specification for Cast-in-Place Nonreinforced ConcretePipe (ACI 346-90) (Reapproved 1997)

ACI 346R-90 Recommendations for Cast-in-PlaceNonreinforced Concrete Pipe (Reapproved 1997)

ACI 347R-94 Guide to Formwork for Concrete

ACI 349-97 Code Requirements for Nuclear Safety RelatedConcrete Structures (ACI 349-97)

ACI 349R-97 Commen t ary on Code Requirements for Nuclear Safety Rel a tedConcrete St ructures (ACI 349-97)

ACI 350R-89 Environmental Engineering Concrete Structures

ACI 352R-91 RECOMMENDATIONS FOR DESIGN OFBEAM-COLUMN JOINTS IN MONOLITHICREINFORCED CONCRETE STRUCTURES

ACI 357R-84 Guide for the Design and Construction ofFixed Offshore Concrete Structures

ACI 359-92 Code for Concrete Reactor Vesselsand Containments (ACI 359-92)

ACI 360R-92 Design of Slabs on Grade

ACI 363R-92 State-of-the-Art Report on High-Strength Concrete

ACI 371R-98 Guide for the Analysis, Design, and Construction ofConcrete-Pedestal Water Towers

ACI 372R-00 Design and Construction of Circular Wire- and Strand-Wrapped Prestressed-Concrete Structures

ACI 373R-97 Design and Construction of CircularPrestressed Concrete Structures withCircumferential Tendons

ACI 435R-95 Control of Deflection in Concrete Structures

ACI 437R-91 Strength Evaluation ofExisting Concrete Buildings

ACI 440R-96 State-of-the-Art Report on Fiber Reinforced Plastic (FRP)Reinforcement for Concrete Structures

ACI 441R-96 High-Strength Concrete Columns:State of the Art

445R_99 RECENT APPROACHES TO SHEAR DESIGN OF STRUCTURAL CONCRETE

ACI 503R-93 USE OF EPOXY COMPOUNDS WITH CONCRETE

ACI 504R-90 Guide to Sealing Joints in Concrete strucutres

ACI 506R-90 Guide to Shotcrete

ACI 524R-93 Guide to Portland Cement Plastering

ACI 530-99 BUILDING CODE REQUIREMENT FOR MASONRY DESIGN

ACI 530R-99 COMMENTRY ON BUILDING CODE REQUIREMENT FOR MASONRY DESIGN

ACI 533R-93 Guide for Precast Concrete Wall Panels

ACI 543R-00 Design, Manufacture, and Installation Concrete Piles

ACI 546R-96 Concrete Repair Guide

ACI 547R-79 Refractory Concrete: Abstract of State-of-the-Art Report

ACI 549R-97 State-of-the-Art Report on Ferrocement

ACI 550R-96 Design Recommendations for Precast Concrete Structures

ACI 551 R-92 TILT-UP CONCRETE STRUCTURES

ACI 124.1 R-92 BAHA�I HOUSE OF WORSHIP

ACI 124.2R-94 THE MERCER MILE BUILDINGS

ACI 126.3R-99 Guide to Recommended Format for Concrete inMaterials Property Database

ACI 201.1 R-92 Guide for Making a Condition Survey (Reapproved 1997)

ACI 201.2R-92 Guide to Durable Concrete

ACI 207.1R-96 Mass Concrete

ACI 207.2R-95 Effect of Restraint, Volume Change, and Reinforcement onCracking of Mass Concrete

ACI 207.3R-94 Practices for Evaluation of Concrete in Existing Massive Structures

for Service Conditions

ACI 207.4R-93 Cooling and Insulating Systems for Mass Concrete

ACI 207.5R-99 Roller-Compacted Mass Concrete

ACI 210.1 R-94 Compendium of Case Histories on Repair ofErosion-Damaged Concrete in Hydraulic Structures

ACI 211.1-91) Standard Practice for Selecting Proportions for NormalHeavyweight, and Mass Concrete (ACI 211.1-91) Reapproved 1997

ACI 211.2-98 Standard Practice for Selecting Proportions forStructural Lightweight Concrete (ACI 211.2-98)

ACI 211.3R-97 Guide for Selecting Proportions for No-Slump Concrete

ACI 211.4R-93 Guide for Selecting Proportions for High-Strength Concrete withPortland Cement and Fly Ash

ACI 211.5R-96 Guide for Submittal of Concrete Proportions

ACI 212.3R-91 Chemical Admixtures for Concrete

ACI 212.4R-93 Guide for the Use of High-Range Water-Reducing Admixtures(Superplasticizers) in Concrete

ACI 214.3R-88 Simplified Version of the Recommended Practice forEvaluation of Strength Test Results of Concrete

ACI 216.1-97 / Standard Method for Determining FireTMS 0216.1-97 Resistance of Concrete and Masonry

Construction Assemblies

ACI 221.1R-98 State-of-the-Art Report on Alkali-Aggregate Reactivity

ACI 222.1-96 Provisional Standard Test Method for Water-Soluble ChlorideAvailable for Corrosion of Embedded Steel in Mortar and ConcreteUsing the Soxhlet Extractor

ACI 224.1R-93 Causes, Evaluation and Repair of Cracks in Concrete Structures

ACI 224.2R-92 Cracking of Concrete Members in Direct Tension

ACI 224.3R-95 Joints in Concrete Construction

ACI 228.1R-95 In-Place Methods to Estimate Concrete Strength

ACI 228.2R-98 Nondestructive Test Methods for Evaluation ofConcrete in Structures

ACI 230.1R-90 State-of-the-Art Report on Soil Cement

ACI 232.2R-96 Use of Fly Ash in Concrete

ACI 302.1R-96 Guide for Concrete Floor and Slab Construction