2ac

cess

ories

/dad

o sets

Dado SetsWhether you’re a skilled professional or a

weekend hobbiest, Freud has a dado set for you.

The SD600 and SD500 Series are Freud’s ultimate

dado sets, offering the best possible cuts. The

SD300 Series adds a level of safety not found in

other manufacturers’ dados, while the SD200

Series provides the quality of cuts you expect

from Freud at an attractive price.

AccessoriesFreud offers a selection of accessories to

complement your saw blades. Choose

from a variety of calibration and

sanding disks, adhesive

sanding disks, stiffeners,

stabilizers and bushings.

• These Calibration and Sanding Disks are a real timesaver for aligning a saw

• Precision machined for absolute balanceand flatness

• Mount these in place of a blade anduse the flat surfaces to accuratelyalign the saw for the best cut

• Apply our self-adhesive sandingdisks and turn a table or radialarm saw into a disk sander

• Use on any table saw, radialarm saw or miter saw

• Covered by Freud's LimitedLifetime Warranty

• Industrial Grade - perfect for professional orhome woodshop

• Backed with premium 100% cotton

• Specially formulated IndustrialAluminum Oxide for disk sanding

• Available in 80, 120, 150, and 180 grit

• Use on any table saw, radial arm saw ormiter saw with Freud’s Calibration andSanding Disks

37

FREUD Adhesive Sanding Disks

CD Calibration and Sanding Disks

Item Dia Grit Bore Quantity

D0808 8" 80 5/8" 5 per pkg.D08120 8" 120 5/8" 5 per pkg.D08150 8" 150 5/8" 5 per pkg.D08180 8" 180 5/8" 5 per pkg.D1008 10" 80 5/8" 5 per pkg.D10120 10" 120 5/8" 5 per pkg.D10150 10" 150 5/8" 5 per pkg.D10180 10" 180 5/8" 5 per pkg.

AC12 Abrasive Cleaning Stick 2" x 2" x 12" 1 per pkg.

also available:D08XXX 8" COMBINATION PACK CONTAINS 5 EACH OF:

80 GRIT, 120 GRIT, 150 GRITD10XXX 10" COMBINATION PACK CONTAINS 5 EACH OF:

80 GRIT, 120 GRIT, 150 GRIT

Item Dia Plate BoreCD008 8" 1/8" 5/8"CD010 10" 1/8" 5/8"/

You can get a straighter, quieter cut with blade stiffeners. Freud offers three different bladestiffeners to choose from. Made of rigid steel, these are ideal to pair with any sawblade.

38

800 / 334-4107

CDS Series Stiffeners

Item Diameter Bore Usage CDS001 4" 5/8" Use with Blade 10" and smallerCDS002 5" 5/8" Use with Blade 10" and smaller

When you are making a high precision cut, any amount of rim vibration can mean thedifference between a masterpiece and scrap. These saw blade stabilizers sets are precisionmachined and balanced to give an added amount of stability. Freud stabilizers not onlyimprove the cut, but make the saw blade cut quieter, and extend its cutting life betweensharpenings. These stabilizers can be used on blades 7" diameter and larger. Stabilizersshould only be used on stationary saws and should never be used on hand held portablesaws. These stabilizes sets contain 2 peices each and should always be used in pairs.

SC Series Stabilizers

Item Arbor Dia Thickness SC-001 5/8" 3-1/2" 9/32"SC-002 1" 3-1/2" 9/32"

39

Inside Outside ThicknessItem Dia Dia Inch GaugeBL10M20095 3/8" 20mm .048 18BL71MCA9 5/8" <>SKIL .056 17BL71MCB9 5/8" 3/4" .056 17BL71MCC9 5/8" 13/16" .056 17BL71MCD9 5/8" 7/8" .064 16BL71MCE9 5/8" 1" .080 14BL71MCF9 5/8" 1-1/4" .092 13BL71MDA9 3/4" 7/8" .080 14BL71MDB9 3/4" 1" .080 14BL71MDC9 3/4" 1-1/8" .092 13BL71MEA9 7/8" 1" .080 14BL71MFA9 1" 1-1/8" .092 13BL71MFB9 1" 1-1/4" .104 12BL71MFC9 1" 1-3/8" .104 12BL71MFD9 1" 1-1/2" .116 11BL71MFE9 1" 1-3/4" .128 10BL71MGW9 5/8" 20mm .064 16BL71MHA9 25mm 30mm .092 13BL71MIA9 1" 30mm .092 13BL71MLA9 5/8" 30mm .092 13BL71MAA9 3/8" 1/2" .048 18BL71MBA9 1/2" 5/8" .056 17BL71MBB9 1/2" 3/4" .056 17BL71MBC9 1/2" 13/16" .056 17BL71MBD9 1/2" 7/8" .064 16BL71MBE9 1/2" 1" .080 14BL71MBF9 1/2" 1-1/8" .080 14

These precision bushings are designed for reducing the arbor size of Freud and othermanufacturers’ saw blades.

FREUD Saw Blade Bushings

Application: Use on all table saws, and radialarm saws for cutting slots, grooves, dadoes,and rabbets in softwood, or hardwood.

Caution: Carbide tips should never come intocontact with each other. Always use bothoutside blades and never use chippers aloneor with just one outside blade.

The Dial-a-Width Dado set is a stacked dado set, but we have replaced the shims with apatented dial system and with our exclusive Dial hub, ensures accurate adjustments. Each“click” of the dial adjusts the blade by .004". The Dial-a-Width dado set is easy to use, andvery precise. For the serious woodworker, there’s nothing better.

• Adjusts in .004" increments.• Maximum 29/32" cut width.• Adjusts easily to right or left operating

machines.• Set includes 2 outside blades, 5 chippers,

wrench, and carrying case.• Does not need shims.

Slot No. Chippers RequiredWidth 1/8 3/32 1/4" 0 0 5/16" 0 0 3/8" 0 17/16" 1 01/2" 1 19/16" 2 05/8" 2 1

11/16" 3 03/4" 3 1

13/16" 4 0

Item Dia Teeth Arbor Chippers SD606 6" 20 5/8" (4)1/8", (1)3/32" SD608 8" 24 5/8" (4)1/8", (1)3/32" Hook Angle = -12˚, Top Bevel Angle = 15˚

Set up approximate number of chippers needed–Dial in for accuracy–and GO!

(NOT A WOBBLE DADO)(NO SHIMS REQUIRED)

Set Includes: 2 Blades 5 Chippers

Wrench

SD600 Series Dial-A-Width StackedDado Sets

40

800 / 334-4107

SD500 Series Super Dado Sets

Item Dia Teeth Arbor Chippers

SD506 6" 20 5/8" (4)1/8", (1)3/32", (1)1/16 SD508 8" 24 5/8" (4)1/8", (1)3/32", (1)1/16 Hook Angle = -12˚Top Bevel Angle = 20˚

Slot No. Chippers RequiredWidth 1/8 3/32 1/16

1/4" 0 0 05/16" 0 0 1

11/32" 0 1 03/8" 1 0 0

13/32" 0 1 17/16" 1 0 1

15/32" 1 1 01/2" 2 0 0

17/32’ 1 1 19/16" 2 0 1

19/32" 2 1 05/8" 3 0 0

21/32" 2 1 111/16" 3 0 123/32" 3 1 0

3/4" 4 0 025/32" 3 1 113/16" 4 0 127/32" 4 1 0

CHIP FREE DADOES IN VENEERED PLYWOODS AND LAMINATES

The SD500 Series Super Dado Sets cuts everything from veneered plywoods and laminatesto solid wood, chip and splinter-free with a super smooth dado bottom and has the flexibilityof an adjustable dado to handle today’s undersized plywood.

The SD500 Series Super Dado Sets were the first dadoes to include a 3/32" thick chipper.This allows the cut width to be adjusted in 1/32" increments and doubles the number of slotwidths available. Many plywoods arebeing manufactured 1/32" undersizedfrom the nominal size and this allowsusers to cut dadoes that will fit thesematerials with less shimming. Wehave also included a shim set withthe dado for fine adjustments.

Freud’s Square Tooth™ designutilizes a shorter and thicker toothwhich reduces drag in the cut andreduces the materials guiding effect.The Square Tooth™ design alsoincreases the number of sharpeningsyou can obtain.

The SD500’s use an extra thick andstiff outside plate, eliminating thehub. The gullet design providesmaximum chip ejection. Both ofthese features prevent chip buildupwithin the stack.

Application: Use on all table saws, andradial arm saws for cutting slots,grooves, dadoes, and rabbets insoftwood, or hardwood.

Caution: Carbide tips should nevercome into contact with each other.Always use both outside blades andnever use chippers alone or with justone outside blade.

41

42

800 / 334-4107

SD300 Series Safety Dado Sets &SD200 Series Pro Dado Sets

Freud’s SD200 series incorporates quality andcraftsmanship in a stacked dado set, but at awobble price! The negative hook angle makesflat bottom grooves and virtually splinter-freecuts. It has 2 outside blades with 5 2-wingchippers. All blades and chippers come withFreud’s kickback reducing design. Perfect forthe weekend woodworker who wants aneconomically priced dado without sacrificingquality. This resharpenable set will producegrooves from 1/4" to 13/16" in 1/16"increments and includes shims for fineadjustments.

Item Dia Teeth Arbor Chippers(C)

SD206 6" 10 5/8" (4)1/8", (1)1/16SD208 8" 12 5/8" (4)1/8", (1)1/16Hook Angle = -12˚Top Bevel Angle = 20˚

Slot No. Chippers RequiredWidth 1/8 1/16

1/4" 0 0 5/16" 0 13/8" 1 0

7/16" 1 11/2" 2 0

9/16" 2 15/8" 3 0

11/16" 3 13/4" 4 0

13/16" 4 1

Application: Use on all table saws andradial arm saws for cutting slots, grooves,dadoes, and rabbets in softwood, orhardwood.

Caution: Carbide tips should never comeinto contact with each other. Always useboth outside blades and never use chippersalone or with just one outside blade.

Item Dia Teeth Arbor ChippersSD306* 6" 18 5/8" (4)1/8", (1)1/16SD308* 8" 22 5/8" (4)1/8", (1)1/16SD408 8" 40 5/8" (4)1/8", (1)1/16SD310 10" 34 1" (4)1/8", (1)1/16SD312 12" 34 1" (4)1/8", (1)1/16Hook Angle = 15˚Top Bevel Angle = 40˚

*Includes shim Sets

Freud’s SD300 series Safety Dado Set seriesprovides the highest quality results whilemaintaining a level of safety never found in adado set before. This stacked dado set withits razor-sharp outside blades will producegrooves or rabbets which are flat bottomedand virtually splinter-free in solid woods.Stacked dado sets are more precise thanother styles of dado sets and with the use ofFreud’s Shim Set the kerf width can beadjusted by as little as .004" for the correctfit.

However, it is the safety features of this bladethat make it the best in the industry. Throughthe use of kickback reducing limitators onboth the outside blades and chippers, thedangers of kickback from overfeeding andclimbing on radial arm saws have beenreduced.

43

SBOX8 Box Joint Cutter SetFreud has developed a method of creating perfectly square, flat-bottom box joints,on a table saw without using a Dado Set or Saw Blade. The SBOX8 Box Joint CutterSet makes box joint construction easy, producing strong, accurate joints withoutshims or awkward adjustments. This patent pending innovation enables users toproduce perfectly square, precise box joints quickly and cleanly the very firsttime—and every time. Includes instructions for making box joints and building abox joint jig.

The set is easy to use, simply install the two 8” diameter, 5/8” arbor blades on a table sawwith the blades back to back for 1⁄4” box joints (A), or face to face for 3/8” box joints (B).

Item Dia Teeth Arbor Width Of Cut

SBOX8 8" 20 5/8" 1/4" Groove &3/8" Groove

Hook Angle = 20˚

Application: Use on all table saws forcutting grooves to create box joints insoftwood, or hardwood.

Caution: Carbide tips should never comeinto contact with each other. Always useboth outside blades.

(1/4" Setting) (3/8" Setting)BA

Set Creates perfect 1/4"& 3/8" Box Joints.

NEW

44

800 / 334-4107

FREUD Dado Set ReplacementParts and Shim Sets

OUTSIDE BLADESItem For Dia Teeth Arbor OrientationSD206OLH SD206 6" 2 5/8" LEFT SIDESD206ORH SD206 6" 2 5/8" RIGHT SIDESD208OLH SD208 8" 2 5/8" LEFT SIDESD208ORH SD208 8" 2 5/8" RIGHT SIDESDOS06LH SD306 6" 24 5/8" LEFT SIDESDOS06RH SD306 6" 24 5/8" RIGHT SIDESDOS08LH SD308 8" 24 5/8" LEFT SIDESDOS08RH SD308 8" 24 5/8" RIGHT SIDESDOS10LH SD310 10" 36 1" LEFT SIDESDOS10RH SD310 10" 36 1" RIGHT SIDESDOS12LH SD312 12" 36 1" LEFT SIDESDOS12RH SD312 12" 36 1" RIGHT SIDESD506OLH SD506 6" 24 5/8" LEFT SIDESD506ORH SD506 6" 24 5/8" RIGHT SIDESD508OLH SD508 8" 24 5/8" LEFT SIDESD508ORH SD508 8" 24 5/8" RIGHT SIDESD606OLH SD606 6" 24 5/8" LEFT SIDESD606ORH SD606 6" 24 5/8" RIGHT SIDESD608OLH SD608 8" 24 5/8" LEFT SIDESD608ORH SD608 8" 24 5/8" RIGHT SIDE

REPLACEMENT PARTS FOR SD606 & SD608 SERIESSD600SP Spring For Hub Assembly Bearing & ScrewsSD600BB Ball Bearing For Hub AssemblySD600HUB Dial HubSD600FLG Flange For Blade AssemblySD600BTI Threaded Insert For FlangeSD600ISC Screws Fir Threaded InsertSD600FSC Screws For Flange

PRECISION SHIM SETSOutside Number of Each ThicknessItem Arbor Diameter .004 .008 .012 .020SS100 5/8" 3 5/32" 4 2 2 2SS200 1" 3 5/32" 4 2 2 2

Freud offers a full range of replacement parts and shim sets. Use dado set components onlywith the dado set for which they are designed. Never use chippers without both outsideblades. The SS100 will work on any stacked dado set on table saws or radial arm saws witha 5/8" arbor. The SS200 will work with any stacked dado set on table saws or radial armsaws with a 1" arbor.

CHIPPERSItem For Dia Teeth Arbor Thickness SD206C16 SD206 6" 2 5/8" 1/16"SD206C18 SD206 6" 2 5/8" 1/8"SD208C16 SD208 8" 2 5/8" 1/16"SD208C18 SD208 8" 2 5/8" 1/8"SDIC0616 SD306 6" 2 5/8" 1/16"SDIC0618 SD306 6" 2 5/8" 1/8"SDIC0816 SD308 8" 2 5/8" 1/16"SDIC0618 SD308 8" 2 5/8" 1/8"SDIC0816 SD308 8" 2 5/8" 1/16"SDIC0818 SD308 8" 2 5/8" 1/8"SDIC1016 SD310 10" 2 1" 1/16"SDIC1018 SD310 10" 2 1" 1/8"SDIC1216 SD312 12" 2 1" 1/16"SDIC1218 SD312 12" 2 1" 1/8"SD506C16 SD506 6" 4 5/8" 1/16"SD506C332 SD506 6" 4 5/8" 3/32"SD506C18 SD506 6" 4 5/8" 1/8"SD508C16 SD508 8" 4 5/8" 1/16"SD508C332 SD508 8" 4 5/8" 3/32"SD508C18 SD508 8" 4 5/8" 1/8"SD606C18 SD606 6" 4 5/8" 1/8"SD606C332 SD606 6" 4 5/8" 3/32"SD608C18 SD608 8" 4 5/8" 1/8"SD608C332 SD608 8" 4 5/8" 3/32"

Freud Router Bits®

Straight Bits

®

Cove Bits

Spiral Bits

®

Compression Bits

®

Panel Pilot Bits

®

Mortising Bits

®

Flush Trim Bits

®

Flush & BevelTrim Bits

®

Round Nose Bits

®

V-Veining Bits

®

Dish Carving Bits

®

DecorativeGrooving Bits

®

Half Round Bits

®

Key Hole & T-SlotBits

®

Lettering Bits

® Rounding Over &Beading Bits

®

Decorative EdgeBits

®

Flute Bits

®

Classical BeadBits

®

Chamfer Bits

® Table Edge &Handrail Bits

® Crown MouldingBits

®

Multi-Profile Bits

® Dovetail & SplineBits

Rabbeting Bits

Slotting Cutters

®

Canoe Bits

®

Drawer Lock Bits

®

®

Tongue & GrooveBits

® Finger & V-JointBits

®

Solid Surface Bits

® Door & WindowBits

ReplacementParts

®

Face MouldingBits

®

Reversible GlueJoint Bits

®

Lock Miter Bits

®

® V-Panel Bits

Router Bit Sets

45

Freud offers a complete line of power tools and accessories. For a complete listing, ask forthe Freud Power Tool catalog.

Freud Power Tools

JS102Biscuit Joiner System WithVariable Angle Fence

FT2000EP3-1/4 Hp Variable Speed PlungeRouter with free Edge Guide

FT2000EPK3-1/4 Hp Variable SpeedPlunge Router Edge Guideand Kit Box

KITBOX

KITBOX

JS100Biscuit Joiner System KIT

BOX

FJ85KHeavy Duty Orbital Jigsaw with Kit Box KIT

BOX

FE82KHeavy Duty 3-1/4" PortablePower Planer

PKG0026Router Table System with stand

PKG0024Router Table System

NEW

KITBOX

46

800 / 334-4107

47

Freud IndexAC12 . . . . . . . . . . . . . . . . .37BL10M2095 . . . . . . . . . . . .39BL71MAA9 . . . . . . . . . . . .39BL71MBA9 . . . . . . . . . . . .39BL71MBB9 . . . . . . . . . . . .39BL71MBC9 . . . . . . . . . . . .39BL71MBD9 . . . . . . . . . . . .39BL71MBE9 . . . . . . . . . . . .39BL71MBF9 . . . . . . . . . . . .39BL71MCA9 . . . . . . . . . . . .39BL71MCB9 . . . . . . . . . . . .39BL71MCC9 . . . . . . . . . . . .39BL71MCD9 . . . . . . . . . . . .39BL71MCE9 . . . . . . . . . . . .39BL71MCF9 . . . . . . . . . . . .39BL71MDA9 . . . . . . . . . . . .39BL71MDB9 . . . . . . . . . . . .39BL71MDC9 . . . . . . . . . . . .39BL71MEA9 . . . . . . . . . . . .39BL71MFA9 . . . . . . . . . . . . .39BL71MFB9 . . . . . . . . . . . .39BL71MFC9 . . . . . . . . . . . .39BL71MFD9 . . . . . . . . . . . .39BL71MFE9 . . . . . . . . . . . . .39BL71MGW9 . . . . . . . . . . . .39BL71MHA9 . . . . . . . . . . . .39BL71MIA9 . . . . . . . . . . . . .39BL71MLA9 . . . . . . . . . . . . .39BL71MNA9 . . . . . . . . . . . .39CD008 . . . . . . . . . . . . . . . .37CD010 . . . . . . . . . . . . . . . .37CDS001 . . . . . . . . . . . . . . .38CDS002 . . . . . . . . . . . . . . .38D0436X . . . . . . . . . . . . . . .35D0516X . . . . . . . . . . . . . . .35D0524X . . . . . . . . . . . . . . .35D0536X . . . . . . . . . . . . . . .35D0620X . . . . . . . . . . . . . . .35D0624A . . . . . . . . . . . . . . .35D0624A . . . . . . . . . . . . . . .30D0624X . . . . . . . . . . . .30, 35D0640X . . . . . . . . . . . . . . .35D0718X . . . . . . . . . . . . . . .30D0724A . . . . . . . . . . . . . . .30D0724X . . . . . . . . . . . . . . .30D0740X . . . . . . . . . . . . . . .32D0748F . . . . . . . . . . . . . . .34D0756N . . . . . . . . . . . . . . .34D0808 . . . . . . . . . . . . . . . .37D08120 . . . . . . . . . . . . . . .37D08150 . . . . . . . . . . . . . . .37D08180 . . . . . . . . . . . . . . .37D0824X . . . . . . . . . . . . . . .30D0840X . . . . . . . . . . . . . . .32D0860S . . . . . . . . . . . . . . .32D1008 . . . . . . . . . . . . . . . .37D10120 . . . . . . . . . . . . . . .37D10150 . . . . . . . . . . . . . . .37D10180 . . . . . . . . . . . . . . .37D1024X . . . . . . . . . . . . . . .30D1040** . . . . . . . . . . . . . . .31D1040A . . . . . . . . . . . . . . .31D1040W . . . . . . . . . . . . . . .35D1044S . . . . . . . . . . . . . . .31D1050X . . . . . . . . . . . . . . .31D1060S . . . . . . . . . . . . . . .32D1060X . . . . . . . . . . . . . . .32D1080L . . . . . . . . . . . . . . .33D1080N . . . . . . . . . . . . . . .34D1080X . . . . . . . . . . . . . . .33D1244X . . . . . . . . . . . . . . .31D1260F . . . . . . . . . . . . . . .34D1280S . . . . . . . . . . . . . . .32D1280X . . . . . . . . . . . . . . .32D1296N . . . . . . . . . . . .33, 34D1472F . . . . . . . . . . . . . . .34D1484X . . . . . . . . . . . . . . .32D1632X . . . . . . . . . . . . . . .35

D1660X . . . . . . . . . . . . . . .35FE82K . . . . . . . . . . . . . . . .46FJ85K . . . . . . . . . . . . . . . .46FT2000E . . . . . . . . . . . . . .46FT2000EM . . . . . . . . . . . . .46JS100 . . . . . . . . . . . . . . . . .46JS102 . . . . . . . . . . . . . . . . .46LM71M010 . . . . . . . . . . . .17LM71M012 . . . . . . . . . . . .17LM71M014 . . . . . . . . . . . .17LM71M016 . . . . . . . . . . . .17LM72M008 . . . . . . . . . . . .16LM72M010 . . . . . . . . . . . .16LM72M012 . . . . . . . . . . . .16LM72M014 . . . . . . . . . . . .16LM72M016 . . . . . . . . . . . .16LM72M018 . . . . . . . . . . . .16LM72R008 . . . . . . . . . . . . .16LM72R010 . . . . . . . . . . . . .16LM72R012 . . . . . . . . . . . . .16LM72R014 . . . . . . . . . . . . .16LM72R016 . . . . . . . . . . . . .16LM74M008 . . . . . . . . . . . .15LM74M010 . . . . . . . . . . . .15LM74M012 . . . . . . . . . . . .15LM74M014 . . . . . . . . . . . .15LM74R008 . . . . . . . . . . . . .15LM74R010 . . . . . . . . . . . . .15LM74R012 . . . . . . . . . . . . .15LM74R014 . . . . . . . . . . . . .15LU71M014 . . . . . . . . . . . . .13LU71M016 . . . . . . . . . . . . .13LU72M006 . . . . . . . . . . . . .12LU72M007 . . . . . . . . . . . . .12LU72M008 . . . . . . . . . . . . .12LU72M009 . . . . . . . . . . . . .12LU72M010 . . . . . . . . . . . . .12LU72M012 . . . . . . . . . . . . .12LU72M014 . . . . . . . . . . . . .12LU72M016 . . . . . . . . . . . . .12LU73M007 . . . . . . . . . . . . . .8LU73M008 . . . . . . . . . . . . . .8LU73M009 . . . . . . . . . . . . . .8LU73M010 . . . . . . . . . . . . . .8LU73M012 . . . . . . . . . . . . . .8LU73M014 . . . . . . . . . . . . . .8LU73M016 . . . . . . . . . . . . . .8LU73M018 . . . . . . . . . . . . . .8LU74R008 . . . . . . . . . . . . . .6LU74R010 . . . . . . . . . . . . . .6LU74R012 . . . . . . . . . . . . . .6LU74R014 . . . . . . . . . . . . . .6LU77M008 . . . . . . . . . . . . .19LU77M010 . . . . . . . . . . . . .19LU77M012 . . . . . . . . . . . . .19LU77M015 . . . . . . . . . . . . .19LU80R010 . . . . . . . . . . . . . .5LU80R012 . . . . . . . . . . . . . .5LU81M008 . . . . . . . . . . . . .11LU81M010 . . . . . . . . . . . . .11LU81M012 . . . . . . . . . . . . .11LU81M014 . . . . . . . . . . . . .11LU81M016 . . . . . . . . . . . . .11LU82M008 . . . . . . . . . . . . .11LU82M009 . . . . . . . . . . . . .11LU82M010 . . . . . . . . . . . . .11LU82M012 . . . . . . . . . . . . .11LU82M014 . . . . . . . . . . . . .11LU82M016 . . . . . . . . . . . . .11LU83R008 . . . . . . . . . . . . .13LU83R010 . . . . . . . . . . . . .13LU83R012 . . . . . . . . . . . . .13LU83R015 . . . . . . . . . . . . .13LU84M008 . . . . . . . . . . . . .14LU84M009 . . . . . . . . . . . . .14LU84M011 . . . . . . . . . . . . .14LU84M012 . . . . . . . . . . . . .14LU84M014 . . . . . . . . . . . . .14

LU84M016 . . . . . . . . . . . . .14LU84R008 . . . . . . . . . . . . .14LU84R009 . . . . . . . . . . . . .14LU84R011 . . . . . . . . . . . . .14LU84R012 . . . . . . . . . . . . .14LU84R014 . . . . . . . . . . . . .14LU84R016 . . . . . . . . . . . . .14LU85R008 . . . . . . . . . . . . . .5LU85R009 . . . . . . . . . . . . . .5LU85R010 . . . . . . . . . . . . . .5LU85R012 . . . . . . . . . . . . . .5LU85R014 . . . . . . . . . . . . . .5LU85R015 . . . . . . . . . . . . . .5LU86R008 . . . . . . . . . . . . .12LU86R010 . . . . . . . . . . . . .12LU86R012 . . . . . . . . . . . . .12LU86R014 . . . . . . . . . . . . .12LU87R008 . . . . . . . . . . . . .17LU87R009 . . . . . . . . . . . . .17LU87R010 . . . . . . . . . . . . .17LU87R012 . . . . . . . . . . . . .17LU88R008 . . . . . . . . . . . . . .6LU88R009 . . . . . . . . . . . . . .6LU88R010 . . . . . . . . . . . . . .6LU88R012 . . . . . . . . . . . . . .6LU89M008 . . . . . . . . . . . . .18LU89M009 . . . . . . . . . . . . .18LU89M010 . . . . . . . . . . . . .18LU89M012 . . . . . . . . . . . . .18LU89M014 . . . . . . . . . . . . .18LU89M015 . . . . . . . . . . . . .18LU89M016 . . . . . . . . . . . . .18LU90M010 . . . . . . . . . . . . .18LU90M012 . . . . . . . . . . . . .18LU91M008 . . . . . . . . . . . . . .7LU91M010 . . . . . . . . . . . . . .7LU91M012 . . . . . . . . . . . . . .7LU91R008 . . . . . . . . . . . . . .7LU91R010 . . . . . . . . . . . . . .7LU91R012 . . . . . . . . . . . . . .7LU92M008 . . . . . . . . . . . . .10LU92M009 . . . . . . . . . . . . .10LU92M010 . . . . . . . . . . . . .10LU92M012 . . . . . . . . . . . . .10LU92M014 . . . . . . . . . . . . .10LU94M008 . . . . . . . . . . . . .19LU94M010 . . . . . . . . . . . . .19LU94M012 . . . . . . . . . . . . .19LU94M014 . . . . . . . . . . . . .19LU95M008 . . . . . . . . . . . . .20LU95M010 . . . . . . . . . . . . .20LU95M012 . . . . . . . . . . . . .20LU95M014 . . . . . . . . . . . . .20LU95R008 . . . . . . . . . . . . .20LU95R010 . . . . . . . . . . . . .20LU95R012 . . . . . . . . . . . . .20LU95R014 . . . . . . . . . . . . .20LU96R008 . . . . . . . . . . . . .10LU96R010 . . . . . . . . . . . . .10LU96R012 . . . . . . . . . . . . .10LU96R015 . . . . . . . . . . . . .10LU97M008 . . . . . . . . . . . . . .9LU97M010 . . . . . . . . . . . . . .9LU97M012 . . . . . . . . . . . . . .9LU97M014 . . . . . . . . . . . . . .9LU97R008 . . . . . . . . . . . . . .9LU97R010 . . . . . . . . . . . . . .9LU97R012 . . . . . . . . . . . . . .9LU97R014 . . . . . . . . . . . . . .9LU98R007 . . . . . . . . . . . . . .8LU98R008 . . . . . . . . . . . . . .8LU98R009 . . . . . . . . . . . . . .8LU98R010 . . . . . . . . . . . . . .8LU98R012 . . . . . . . . . . . . . .8LU98R014 . . . . . . . . . . . . . .8LU98R016 . . . . . . . . . . . . . .8PKG0024 . . . . . . . . . . . . . .46PKG0026 . . . . . . . . . . . . . .46

SBOX8 . . . . . . . . . . . . . . . .43SC-001 . . . . . . . . . . . . . . .38SC-002 . . . . . . . . . . . . . . .38SD206 . . . . . . . . . . . . . . . .42SD206C16 . . . . . . . . . . . . .46SD206C18 . . . . . . . . . . . . .46SD206OLH . . . . . . . . . . . .47SD206ORH . . . . . . . . . . . .47SD208 . . . . . . . . . . . . . . . .42SD208C16 . . . . . . . . . . . . .46SD208C18 . . . . . . . . . . . . .46SD208OLH . . . . . . . . . . . .46SD208ORH . . . . . . . . . . . .46SD306 . . . . . . . . . . . . . . . .42SD308 . . . . . . . . . . . . . . . .42SD310 . . . . . . . . . . . . . . . .42SD312 . . . . . . . . . . . . . . . .42SD408 . . . . . . . . . . . . . . . .42SD506 . . . . . . . . . . . . . . . .41SD506C16 . . . . . . . . . . . . .44SD506C18 . . . . . . . . . . . . .44SD506C332 . . . . . . . . . . . .44SD506OLH . . . . . . . . . . . .44SD506ORH . . . . . . . . . . . .44SD508 . . . . . . . . . . . . . . . .41SD508C16 . . . . . . . . . . . . .44SD508C18 . . . . . . . . . . . . .44SD508C332 . . . . . . . . . . . .44SD508OLH . . . . . . . . . . . .44SD508ORH . . . . . . . . . . . .44SD600BB . . . . . . . . . . . . . .44SD600BTI . . . . . . . . . . . . .44SD600FLG . . . . . . . . . . . . .44SD600FSC . . . . . . . . . . . . .44SD600HUB . . . . . . . . . . . .44SD600ISC1 . . . . . . . . . . . .44SD600SP . . . . . . . . . . . . . .44SD606 . . . . . . . . . . . . . . . .40SD6060LH . . . . . . . . . . . . .44SD6060RH . . . . . . . . . . . . .44SD608 . . . . . . . . . . . . . . . .40SD608C18 . . . . . . . . . . . . .44SD608C332 . . . . . . . . . . . .44SD608OLH . . . . . . . . . . . .44SD608ORH . . . . . . . . . . . .44SDIC0616 . . . . . . . . . . . . .44SDIC0618 . . . . . . . . . . . . .44SDIC0816 . . . . . . . . . . . . .44SDIC0818 . . . . . . . . . . . . .44SDIC1016 . . . . . . . . . . . . .44SDIC1018 . . . . . . . . . . . . .44SDIC1216 . . . . . . . . . . . . .44SDIC1218 . . . . . . . . . . . . .44SDOS06LH . . . . . . . . . . . .44SDOS06RH . . . . . . . . . . . .44SDOS08LH . . . . . . . . . . . .44SDOS08RH . . . . . . . . . . . .44SDOS10LH . . . . . . . . . . . .44SDOS10RH . . . . . . . . . . . .44SDOS12LH . . . . . . . . . . . .44SDOS12RH . . . . . . . . . . . .44SS100 . . . . . . . . . . . . . . . .44SS200 . . . . . . . . . . . . . . . .44TK001 . . . . . . . . . . . . . . . .27TK002 . . . . . . . . . . . . . . . .27TK003 . . . . . . . . . . . . . . . .27TK004 . . . . . . . . . . . . . . . .27TK006 . . . . . . . . . . . . . . . .28TK007 . . . . . . . . . . . . . . . .28TK103 . . . . . . . . . . . . . . . .26TK201 . . . . . . . . . . . . . . . .25TK203 . . . . . . . . . . . . . . . .25TK204 . . . . . . . . . . . . . . . .25TK205 . . . . . . . . . . . . . . . .25TK206 . . . . . . . . . . . . . . . .25TK301 . . . . . . . . . . . . . . . .25TK303 . . . . . . . . . . . . . . . .25TK304 . . . . . . . . . . . . . . . .25

TK305 . . . . . . . . . . . . . . . .25TK306 . . . . . . . . . . . . . . . .25TK307 . . . . . . . . . . . . . . . .25TK406 . . . . . . . . . . . . . . . .23TK407 . . . . . . . . . . . . . . . .23TK408 . . . . . . . . . . . . . . . .23TK501 . . . . . . . . . . . . . . . .26TK503 . . . . . . . . . . . . . . . .26TK504 . . . . . . . . . . . . . . . .26TK604 . . . . . . . . . . . . . . . .22

TK606 . . . . . . . . . . . . . . . .22TK703 . . . . . . . . . . . . . . . .24TK706 . . . . . . . . . . . . . . . .24TK806 . . . . . . . . . . . . . . . .22TK806L . . . . . . . . . . . . . . .23TK901 . . . . . . . . . . . . . . . .24TK903 . . . . . . . . . . . . . . . .24TK904 . . . . . . . . . . . . . . . .24TK905 . . . . . . . . . . . . . . . .24TK906 . . . . . . . . . . . . . . . .24

48

800 / 334-4107

Freud Index

Diablo Beam Saw Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Diablo Combination Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Diablo Fine Finish Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32Diablo Finish Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32Diablo Framing Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Diablo General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Diablo Melamine/Laminate/Laminate Flooring Blade . . . . . . . . .33Diablo Non-Ferrous/Plastics Blades . . . . . . . . . . . . . . . . . . . . . .34Diablo Ripping Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Diablo Steel Demon Ferrous Metal Blades . . . . . . . . . . . . . . . .34Diablo Trim Saw Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Diablo Ultra Finish Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Industrial Cabinet Maker's Blade . . . . . . . . . . . . . . . . . . . . . . . . .8Industrial Combination Blades . . . . . . . . . . . . . . . . . . . . . . . . . .14Industrial Thin Kerf Double Sided Laminate/Melamine Blades .10Industrial General Purpose Blades . . . . . . . . . . . . . . . . . . . . . . .12Industrial Glue Line Ripping Blades . . . . . . . . . . . . . . . . . . . . . .15Industrial Heavy Duty Multi-Purpose Blades . . . . . . . . . . . . . . .11Industrial Heavy Duty Rip Blades . . . . . . . . . . . . . . . . . . . . . . . .16Industrial Plastic Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19Industrial Production General Purpose Blade . . . . . . . . . . . . . .13Industrial Single Sided Laminate / Melamine Blade . . . . . . . . . . .8Industrial Solid Surface Blades . . . . . . . . . . . . . . . . . . . . . . . . . .20Industrial Stacked Chipboard Blades . . . . . . . . . . . . . . . . . . . . .11Industrial Thick Stock Non-Ferrous Metal Blades . . . . . . . . . . .18Industrial Thick Stock Rip Blades . . . . . . . . . . . . . . . . . . . . . . . .17Industrial Thick-Stock Laminate Blades . . . . . . . . . . . . . . . . . . .10Industrial Thin Kerf Combination Blades . . . . . . . . . . . . . . . . . .13Industrial Thin Kerf Fine Finish Crosscut Blades . . . . . . . . . . . . .6Industrial Thin Kerf General Purpose Blades . . . . . . . . . . . . . . .12Industrial Thin Kerf Laminate Blades . . . . . . . . . . . . . . . . . . . . .10Industrial Thin Kerf Non-Ferrous Metal Blades . . . . . . . . . . . . .19Industrial Thin Kerf Rip Blades . . . . . . . . . . . . . . . . . . . . . . . . . .17Industrial Thin Kerf Sliding Compound Miter Blades . . . . . . . . . .7Industrial Thin Kerf Ultimate Crosscut Blades . . . . . . . . . . . . . . .6Industrial Thin Stock Non-Ferrous Metal Blades . . . . . . . . . . . .18Industrial Precision Crosscut Blades . . . . . . . . . . . . . . . . . . . . . .5Industrial Ultimate Cut-Off Blades . . . . . . . . . . . . . . . . . . . . . . . .5Avanti Thin Kerf Combination Blades . . . . . . . . . . . . . . . . . . . . .24Avanti Thin Kerf Cordless Trim Saw Blades . . . . . . . . . . . . . . . .27Avanti Thin Kerf Decking and Framing Blades . . . . . . . . . . . . . .26Avanti Thin Kerf Fine Cut-off Blades . . . . . . . . . . . . . . . . . . . . .23Avanti Thin Kerf Framing/Ripping Blades . . . . . . . . . . . . . . . . . .25Avanti Thin Kerf General Purpose Blades . . . . . . . . . . . . . . . . .25Avanti Thin Kerf Laminate, Melamine & Laminate Flooring Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Avanti Thin Kerf Non-Ferrous Metal/Plastic Cutting Blade . . . .24Avanti Thin Kerf Remodeling Blades . . . . . . . . . . . . . . . . . . . . .26Avanti Thin Kerf Sliding Compound Miter/Radial Saw Blades . .22Avanti Thin Kerf Trim Saw Blades . . . . . . . . . . . . . . . . . . . . .31,32Avanti Thin Kerf Ultra Fine Crosscut Blades . . . . . . . . . . . . . . .22Router Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45Power Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46Box Joint Cutter Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

FREUD LIMITED TOOLING WARRANTY

All Freud tools are engineered and manufactured to the highest of standards. Freudwarrants to the original purchaser at retail that each new Freud tool shall be free fromdefects in material and workmanship, subject to the Guidelines below. Upon verificationof failure or malfunction, Freud shall, at its option, within sixty (60) days, repair orreplace the tool, subject to the Guidelines below.

GUIDELINES

1. In the event of failure or malfunction, return the product, properly packaged andpostage prepaid, to Freud at the address listed below or to an authorized Freud toolservice station. See back of price list for authorized repair dealers. You may alsocontact Freud at (336) 434-3171 for instructions on returns and technical advice.

2. All implied warranties for Freud’s power tools (INCLUDING MERCHANTABILITY ANDFITNESS FOR PARTICULAR PURPOSE) are limited to the period of one year from thepurchase date. Some states do not allow limitations on how long an implied warrantylasts, so the above limitation may not apply to you.

3. A warranty claim shall be limited to repair or replacement as stated in Freud’s LimitedTooling Warranty and in no event shall Freud be liable for any other direct, indirect,incidental or consequential damages, costs or expenses. INCIDENTAL ANDCONSEQUENTIAL DAMAGES ARE EXCLUDED UNDER ALL WARRANTIES. Somestates do not allow the exclusion or limitation of incidental or consequential damages,so the above limitation or exclusion may not apply to you.

4. Freud warranties give you specific legal rights, and you may also have other rightswhich vary from state to state.

5. Freud warranties shall not be deemed to have failed their essential purpose whileFreud is willing to repair or replace defective products.

6. Freud assumes no liability for defects or damage caused by abuse or misuse of anyproduct or unauthorized service of any product. The product must have been used forits recommended purpose and not modified by sharpening or other changes. Normalwear and tear are not covered under Freud warranties.

7. Any action for breach of warranty must be commenced within one year after theaccrual of the cause of action.

To obtain service under Freud warranties, contact an authorized repair center or:

IN UNITED STATES IN CANADAFreud America, Inc. Freud CanadaAttn. Customer Service Attn. Customer ServicePost Office Box 7187 7450 Pacific CircleHigh Point, North Carolina 27264 Mississauga, Ontario L5T 2A3(336) 434-3171 (905) 670-1025

FREUD Lifetime Guarantee

1-800-472-7307Freud America, Inc.e-mail: CustomerService@freudtools.com

Visit our websitewww.FreudTools.com

1-905-670-1025Freud Canadae-mail: sales@freudcanada.com

Call Freud for all of your woodworking needs.

Here are other quality products from Freud:

� ROUTER BITS

� FORSTNER BITS

� BIT SETS

� SHAPER CUTTERS

� PLANER & JOINER KNIVES

� POWER TOOLS

� ACCESSORIES

Premier Series, Diablo¨ , Steel Demon¨ , and Perma-SHEILD¨ aretrademarks of Freud America, Inc.

©2005 Freud America, Inc. All rights reserved. No portion of thiscatalog may be reprinted without the written consent of FreudAmerica, Incorporated.

All specifications are subject to change without notice.

PN#LIT0002Print 4/2005