Access chamber systems for Fibre Joint Bays STAKKAboxTM for FTN · 2018. 9. 6. · Access chamber...

2
The STAKKAbox TM offers Network Rail network contractors the ability to quickly, safely and economically construct Fibre Joint Bays and other equivalent underground access chambers. In addition, the tried and tested design of the STAKKAbox TM means that when installed, the unit will provide years of service for Network Rail. The STAKKAbox TM is not affected by diesel, ground acids, alkalines or frost – all known killers of concrete. As a structural unit it will support loadings imparted from vehicles and passing trains. Safety on site is maintained when installed as the longer cable lengths held in the chamber allow service work to be carried out on the joint well away from the track and access to the chamber can be made by one man when composite covers are installed. CONCRETE vs STAKKAbox TM + 200Kgs TOTAL WEIGHT 128Kgs 5 Hours I INSTALLATION TIME 35 Minutes 8 MEN TO LIFT (HSE GUIDE 25Kgs/ MAN) 2 5 Metres CABLE LENGTH CAPACITY 450 Metres No SECURITY FITTED AS STANDARD Yes Yes SPECIAL PLANT REQUIRED ON SITE No Access chamber systems for Fibre Joint Bays STAKKAbox TM for FTN Contact Us Sales Office: +44 (0)28 3831 3107 Fax: +44 (0)28 3831 7770 Web: www.cubisindustries.com Email: sales@cubisindustries.com Approved by: Certificate #: PA05/02301 Product Summary Two man installation Compatible with existing trough Very strong – exceeds 15 tonnes vertical loading and has sidewall loadings comparable to concrete Arrives on site fully pre-kitted Rapid installation Secure Stores up to 450m Of Cable Very safe to use when installed

Transcript of Access chamber systems for Fibre Joint Bays STAKKAboxTM for FTN · 2018. 9. 6. · Access chamber...

Page 1: Access chamber systems for Fibre Joint Bays STAKKAboxTM for FTN · 2018. 9. 6. · Access chamber systems for Fibre Joint Bays STAKKAboxTM for FTN B H F A G E C D COVER & FRAME OPTION

The STAKKAboxTM offers Network Rail network contractors the ability to quickly, safely and economically construct Fibre Joint Bays and other equivalent underground access chambers.

In addition, the tried and tested design of the STAKKAboxTM means that when installed, the unit will provide years of service for Network Rail. The STAKKAboxTM is not affected by diesel, ground acids, alkalines or frost – all known killers of concrete. As a structural unit it will support loadings imparted from vehicles and passing trains.

Safety on site is maintained when installed as the longer cable lengths held in the chamber allow service work to be carried out on the joint well away from the track and access to the chamber can be made by one man when composite covers are installed.

CONCRETE vs STAKKAboxTM

+ 200Kgs TOTAL WEIGHT 128Kgs5 Hours I INSTALLATION TIME 35 Minutes

8 MEN TO LIFT (HSE GUIDE 25Kgs/ MAN) 2

5 Metres CABLE LENGTH CAPACITY 450 Metres

No SECURITY FITTED AS STANDARD Yes

Yes SPECIAL PLANT REQUIRED ON SITE No

Access chamber systems for Fibre Joint Bays

STAKKAboxTM for FTN

Contact Us

Sales Office: +44 (0)28 3831 3107Fax: +44 (0)28 3831 7770Web: www.cubisindustries.com Email: [email protected]

Approved by:

Certificate #: PA05/02301

Product Summary

Two man installation• Compatible with • existing troughVery strong – • exceeds 15 tonnes vertical loading and has sidewall loadings comparable to concreteArrives on site fully • pre-kittedRapid installation• Secure• Stores up to 450m Of • CableVery safe to use • when installed

Page 2: Access chamber systems for Fibre Joint Bays STAKKAboxTM for FTN · 2018. 9. 6. · Access chamber systems for Fibre Joint Bays STAKKAboxTM for FTN B H F A G E C D COVER & FRAME OPTION

Access chamber systems for Fibre Joint Bays

STAKKAboxTM for FTN

B

H

F A

G

E

C

D

COVER & FRAMEOPTION 1Composite EN124 B125 Double locking lids, 610mm x 610mm, galvanised steel frame (bolted to chamber top H)INDIVIDUAL COVER WEIGHT: 20KgsTOTAL COVERS WEIGHT: 58KgsOPTION 2Concrete infill EN124 B125 Double locking lids, 610mm x 610mm, galvanised steel frame (bolted to chamber top H)INDIVIDUAL COVER WEIGHT: 58KgsTOTAL COVER WEIGHT: 129Kgs

CHAMBERSECTION DEPTH: 150mmSECTION WEIGHT: 14Kgs

CLEAR OPENINGA: LENGTH 1310mmB: WIDTH 610mm

OVERALL SIZEC: LENGTH 1410mmD: WIDTH 710mmE: DEPTH 450mm,600mm (shown) or 750mmBASE 11mm thick and complete withdrainage hole, WEIGHT: 12Kgs

ACCESSORIESCHAMBER ENTRY BELLMOUTHF: INTERNAL DIAMETER 110mm

JOINT BEARER BRACKETS x 2G: WALL CHANNEL LENGTH 508mmARM LENGTH 263mmTOTAL WEIGHT: 3.8Kgs