AC100

Product Presentation: Hardware

© 2008 FingerTec Worldwide Sdn. Bhd. All rights reserved.

AC100

TA100T

AC100 Plus

TA100/TA100 DIY

http://www.fingertec.com/


Time Attendance Models can gather and process information about employees’ attendance using fingerprints, passwords and various cards.

The models are not designed to control the door access and, therefore, cannot be connected to door lock system.

Advantages of Time Attendance Models• Require low cost compared to other models• Come with stylish and contemporary designs• Easy to install – can be installed on the wall or on the customized flexible stand• Integrate various verification methods – fingerprints, passwords, RFID ID/ HID/ MIFARE cards• Support large number of users and have huge transaction storage capacity• Include useful time attendance features like siren, work codes, receipts printing, extended user ID

and DIY attendance report

The main benefit of the Time Attendance models is the prevention of body-punching among employees and recording their attendance with ease and accuracy without the need to manually keying in data.

TIME ATTENDANCE MODELS



Scheduled Siren / Bells• Can be set to ring bell/siren at scheduled times (for example schedules to notify employees to check in, go for

lunch, change shifts etc.)• There are 2 types of schedules that can be preset

Daily schedules– 25 schedules for a day (repetitive everyday) Weekly schedules–140 schedules for a week (20 schedules everyday day for a week)

USEFUL FEATURES OF TIME ATTENDANCE MODELS

Work Codes• Work codes predefined by the administrator can be used to define reason for unusual clocking (for example:

emergency leave – code 15, going to meet client – code 23 etc)• Easy access to software by administrator or authorized person (for example to predefine the work codes,

print report etc.)



Extended user ID• Have extended user ID that range from 5 digits to 9 digits depending on model (the longer user ID allows

representation of a wider range of information (for example departments, floors, divisions, dates of enrolment etc.)

Printing Receipt• Can print receipt of transaction by connecting to a printer with serial port (for example the terminal can be

set to print a receipt after each user verification)• The information printed on the receipt includes user ID, date and time verified and work code. • The printing can be done in 4 different types of format




DIY time attendance report• The time attendance record can be generated and printed out without the need for computer or software.• Administrator registers new users at the terminal that stores the keyed in information• Each time going in or out the users press key button according to work code that defines coming to work,

going to lunch, resume from lunch, go home, etc.• Working time is calculated by terminal automatically

• The report that shows users’ attendance record can be saved into USB flash disc or directly printed by connecting to the printer.

USEFUL FEATURES OF TIME ATTENDANCE MODEL



Fingerprint matching – 1:1 and 1:N verification

Card Reading – RFID, EM ID, MIFARE and HID cards • RFID card / EM ID card – 64 bits 125kHz (optional to read front 10-digits, last 8-digits or last 5-digits of card)

• MIFARE card – MF IC50/70, 13.56MHz (store fingerprints into cards as privacy, optional to store 4 ~ 10 fingerprint in a single card)

• HID card – 26-bits HID 1325

Keying in Password – the password length is maximum 5-digits

Various verification combinations• Fingerprint only, Fingerprint and RFID Card, Fingerprint and MIFARE etc.

- Various verification methods and combinations increase security and allow to integrate with or upgrade the existing system (e.g., a system based on RFID cards)

VERIFICATION METHODS OF TIME ATTENDANCE MODELS



Most common types of connection• TCP/IP (support multiple terminals and widely used in network structures)• RS232 (conventional 9-pin serial port for short distance connection, but not suitable for network structures)• RS485 (With additional devises, supports long distance connection (up to1km) and network structures)

DATA TRANSMITION

Connection without wire• USB flash disk (without connecting by wire, data between terminal • and PC is transferred by USB flash disk)

TCP/IP RS232 RS485



• Supports 1500 or 2800 fingerprint templates depending on the model

• Verification by fingerprint, password and cards• Types of supported Cards (TA103R)

RFID / HID / MIFARE• Combination of verification methods (TA103R)

Card only, Card and Fingerprint, Card and Password• Communication by:

TCP/IP, RS232, RS485 and USB flash disk• Time attendance features

Sirens, work codes, receipt printing, extended user ID• Target: Factories, small and medium offices, training centers,

schools, retail outlets etc.

TA100

FEATURES AND BENEFITS



• Supports 800 fingerprint templates• Verification by fingerprint and password• Time attendance features

Siren• Communication by:

TCP/IP and USB flash disk• Do-It-Yourself (DIY) concept• Target: small workshop and factories, small

offices, retails outlets, food stalls

TA100 DIY




• Enhanced with better Fingerprint Scanner URU Scanner Better capturing image Higher sensitivity

• Supports 1500 fingerprint templates• Verification by fingerprint and/or password• Communication by:


Work codes and receipt printing. • Target: Factories, small and medium offices, training

centers, schools, retails outlets etc.AC102 Plus




Q2M2/R2 AC900 AC800 PlusR2i



Access Control and Time Attendance models provide a complete solution for both door access control and employees’ time attendance recording.

Target market: small and medium offices, warehouses, retails outlets, training centers, schools, institutes etc.

Benefits• Complete solution for both Time Attendance and Access Control• Stylish and robust design• Easy installation (wall mounted design, flexible support stand, direct to door lock

system, or with AdapTec AC)• Various verification methods – fingerprints, passwords and RFID/ HID/ MIFARE cards• Large users capacity and transaction storage• Integrated useful time attendance features – work codes, receipts printing, extended

users ID, short message display• Integrated useful access control features – antipassback, door sensor, alarm output,

tamper switch, duress option, master-slave concept.

ACCESS CONTROL AND TIME ATTENDANCE MODELS




Short Message Display• Allows to publish short messages on the screen

- Public message – displayed to all users

- Personal message – displayed to selected users only• The massage can be set for a certain time period and after the predefined date, the message will be

automatically deleted. • Useful to pass information to all employee during access and verification (e.g., “Replacement Holiday on

Monday”, “Happy birthday to Allan” etc.)

Work Codes – used to describe reason for unusual clocking

Receipt printing – to issue receipt for users after access verification

Extended user ID – extended to 9 digits to allow representation of a wider information



Short Message Displaying

Public message - To display message to users after verification

Personal message - To display message to selected users after verification

User is verified User is verified

Edmond is verified Edmond is verified

User places finger on the scanner for verification

User places finger on the scanner for verification

Company anniversary today. Free Lunch in canteen

HappyBirthday fromAdministration

Edmond places finger on theScanner for verification




USEFUL FEATURES OF ACCESS CONTROL

Tamper Switch• Terminal will trigger alarm system through release of tamper switch in case an unauthorized person tries to

dismantle or tamper it

Door Sensor• In case the door is opened without verification or force opened, the terminal triggers alarm system.• If the door is not closed for certain predefined time, the terminal will alert the user and trigger alarm if the user

ignores the alert (to set up this function, a door sensor and connection to alarm system are required)



USEFUL ACCESS CONTROL FEATURES

Duress option• User is authorized to trigger alarm during emergency• Do not require a special password, only a duress finger or password• The duress finger or password

- Enrolled during registration- To be used only in emergency cases to trigger alarm system

Alarm output• 2 types of signals, NO (normally open) and NC (normally closed)• Must be connected to alarm system



USEFUL ACCESS CONTROL FEATURES

Antipassback• Requires 2 terminals to guard the entrance• User must be verified when coming in or going out• If user missed verification, the terminal blocks user and displays “Antipassback”• This feature prevents tail gating• System software generates Entry-Exit report that shows user’s coming in and going out time slots in pairs

Master-slave• Requires 2 terminals to guard the entrance• User must be verified to open the door, but the terminal does not block users in case of missed verification• This feature prevents unauthorized person to come in or leave the guarded zone.• The slave terminal is with optical scanner and without LCD or keypad• Easy installation – requires a cable to link slave terminal to master terminal• Provides a complete access control system with low cost



ENROLLMENT & VERIFICATION METHODS

Fingerprint - 1:1 verification and 1:N verification

Verification combinations• Fingerprint only, Fingerprint and RFID Card, Fingerprint and MIFARE etc.

- Various verification methods and combinations increase security and allow to integrate with or upgrade the existing system (e.g., a system based on RFID cards)

Password - maximum 5-digits

Card reading – RFID/EM ID, MIFARE and HID cards• RFID card/ EM ID cards – 64-bits 125kHz (optional to read front 10-digits, last 8-digits or last 5-digits of card)• MIFARE card – MF IC50/70, 13.56MHz (store fingerprints into cards as privacy, optional to store 4 ~ 10

fingerprints in a single card)• HID card – 26-bits HID 1325



TCP/IP RS232 RS485

DATA TRANSMITION

Most common types of connection• TCP/IP (support multiple terminals and widely used in network structures)

• RS232 (conventional 9-pin serial port for short distance connection, but not suitable for network structures)

• RS485 (With additional devises, supports long distance connection (up to1km) and network structures)

Professional wiring types• Wiegand 26-bits input-output (to work with 3rd party controller or device)

Connection without wire• USB flash disk (without connecting by wire, data between terminal • and PC is transferred by USB flash disk)



• Slim and stylish design• Supports 1500 or 2800 fingerprint templates• Verification by fingerprint and/or password• Communication

TCP/IP, RS232 and RS485 Wiegand 26-bits output

• Time attendance features Work Codes, receipt printing and extended user

ID• Access control features

Door sensor, tamper switch, duress option and alarm output

• Target market: small and medium offices, warehouses, retail outlets, training centers, schools, institute etc

AC900




• Slim and stylish design• Supports 3000 fingerprint templates • Verification by fingerprint, password and RFID/ HID/

MIFARE cards • Combination of verification methods

Fingerprint or card only, Card and Fingerprint, Card and Password, etc.

• Communication TCP/IP, RS232, RS485 and USB flash disk Wiegand 26-bits input-output

• Time attendance features Work Codes, receipt printing, extended user ID,

short message display• Access control features

Door sensor, tamper switch, duress option, alarm output, Antipassback, master-slave concept

• Target market: small and medium offices, warehouses, retail outlets, training centers, schools, institute etc.

R2




• Robust design – zinc alloy casing• Supports 3000 fingerprint templates • Verification by fingerprint and/ or password• Combination of verification methods

Fingerprint only, fingerprint and password etc.

• Communication TCP/IP, RS232, RS485 and USB flash disk Wiegand 26-bits input-output

• Time attendance features Work Codes, receipt printing , short message

display, extended user ID• Access control features

Door sensor, tamper switch, duress option, alarm output and Antipassback, master-slave concept

• Target market: small and medium offices, warehouses, retail outlets, training centers, schools, institute etc.

M2




• Purely fingerprint capturing station (No storage for fingerprint templates or transaction logs)

• Verification station for RFID/ HID/ MIFARE cards• Suitable as slave unit to work with R2, M2, Kadex, i-

Kiosk 100 and i-Kiosk 100 Plus • Captured fingerprint is send to the master for

verification (data stored in the master unit)• Door lock system controlled by master unit• Simple connection – only a special cable to connect

from R2i to the master unit, without extra power cable or wiring.

• Target market:small and medium offices, warehouses, retail outlets, training centers, schools, institute etcR2i




Timeline 100 Kadex



• Supports 10,000 cards• Verification by Cards and/or Password

RFID / HID/ MIFARE cards• Communication


Sirens, work codes and receipt printing. • Target: Factories, offices, training centers, schools,

retails outlets etc.

Timeline 100




• Supports 30,000 cards & 100,000 logs • Verification by RFID/HID/MIFARE Cards and

Password verification• Combinations of verification

Fingerprint only, fingerprint and password, etc.• Communication

TCP/IP, RS232, RS485 and USB flash disk Wiegand 26-bits input-output

• Time attendance features Work Codes, receipt printing, short message

display, extended user ID• Access control features

Door sensor, tamper switch, duress option, alarm output Antipassback, master-slave concept

• Target market: small and medium offices, warehouses, retails outlets, training centers, schools, institute etc

Kadex




Q2i/TA200 Plus i-Kiosk 100 i-Kiosk 100 Plus



• Multimedia models are the latest development to go into a new era of biometric industry• Come with 3.5” or 8.0” 65k TFT LCD screen – for better visual effects• Photo display - allows to add in company photo or advertisement as wallpaper or screen saver• Movies playback – to display company advertisement video during idle mode• Run on LINUX platform – fast processing and embedded with more powerful features• Interactive display and icons – easy and convenient to operate• Shortcut key buttons – fast access to most frequent used option• Photo capturing during user enrollment & verification – to be used as a reference• Multimedia features – photo displaying, short messaging and music playback• Supporting Cards – RFID/ HID/MIFARE cards• Optional with WiFi or GPRS connection

MULTIMEDIA MODELS



Photo displaying and music playback• For example to display company photo or music during

idle mode or display company information



Company anniversary today. Free Lunch in canteen

HappyBirthday fromAdministration

User is verified User is verified

Edmond is verified Edmond is verified



User places finger on theScanner for verification

User places finger on theScanner for verification

Short Message DisplayingPublic message - To display message to users after verification

Personal message - To display message to selected users after verification



• Supports 1500 fingerprint templates• Verification by fingerprint, password and cards• Supporting Cards – RFID/ MIFARE/ HID• Communication – TCP/IP, RS232, RS485, USB flash

disk and WiFi/GPRS• Time attendance features

Work Codes, receipt printing, short message display, extended user ID

• Multimedia features – short message display, photo display

• Target market:small and medium offices, retail outlets, training centers, institute etc.TA200 Plus




• Upgraded version of TA200Plus• Supports 1500 fingerprint templates• Verification by fingerprint, password and cards• Supporting Cards – RFID/ MIFARE/ HID• Communication – TCP/IP, RS232, RS485, USB flash

disk, WiFi/GPRS• Time attendance features

Work Codes, receipt printing , short message display, extended user ID

• Access control features Door sensor, tamper switch, duress option, alarm

output, Antipassback, master-slave concept• Multimedia features – short message display, photo

display• Target market: small and medium offices, warehouses,

retail outlets, chain stores, training centers, schools, institute etc.

Q2i




• Unique design with 3.5” TFT color LCD display• Supports 1500 fingerprint templates• Verification by fingerprint, password and cards• Supporting Cards – RFID/ MIFARE/ HID• Communication – TCP/IP, RS232, RS485, USB flash disk,

WiFi/GPRS• Time attendance features



output, Antipassback, master-slave concept• Multimedia features – short message display, photo display• Target market: medium and big offices, warehouses, retail

outlets, chain stores, training centers, schools, institute etc.i-Kiosk 100




• Ultramodern design with 8.0” TFT color LCD display• Supports 1500 fingerprint templates• Verification by fingerprint, password and cards• Supporting Cards – RFID/ MIFARE/ HID• Communication – TCP/IP, RS232, RS485, USB flash disk,

WiFi/GPRS• Time attendance features



output, Antipassback, master-slave concept• Multimedia features – short message display, photo display,

movie playback• Target market: medium and big offices, warehouses, retail

outlets, chain stores, training centers, schools, institute etc.i-Kiosk 100 Plus




Keylock 6600 Keylock 6600A Keylock 7700H2i



• Function as a simple door access control without transaction logs storage

• Low cost solution to control door access

• Simple installation, without wiring or PC connection (Can be installed directly to the existing door holes of the conventional knob door lock)

ACCESS CONTROL MODELS



• FingerPrint Optical Scanner without LCD or keypad• Comes with Card writer/reader for RFID/HID/MIFARE

cards• Simple handling – 2 buttons and voice guiding

instructions• Supports 1500 fingerprint templates and 30000

transaction logs• Used as a simple access control terminal• For coming in-going out control system, 2 units of H2i

are required at the door access• Works as a slave terminal for master terminal• Can be linked to computer with USB cable to

download/upload data and configurationsH2i




• Mechanical fingerprint door lock• Supports 75~150 fingerprints and 78 Passwords• Powered by four 1.5V alkaline batteries• Features mechanical key and extra power input for

backup battery• Used as simple door control (no transactions record)• Can be installed as a replacement of conventional

knob lock (using same door holes)

Keylock 6600

Keylock 6600A




• Mechanical fingerprint door lock with LCD display and voice greetings

• Support 450 fingerprints, 240 Passwords and MIFARE card

• Powered by four 1.5V alkaline batteries• Features mechanical key and extra power input for

backup battery• Keep transaction 50000 transaction logs that can

be downloaded into software for analysis• Can be installed as a replacement of conventional

knob lock (using same door holes)

Keylock 7700




OFIS OFIS TA



• Online FingerPrint Identification System• For software developer to develop security login system

to replace conventional password system• Supports various programming languages• Comes with a sample • Server-Client package• Can operate with TCMS V2

As desktop station to capture users’ attendance As enrollment and verification station

OFIS

OFIS TA



AC100

Documents

Transcript of AC100