AC and DC Hour Meters - Trumeter - design &...
Transcript of AC and DC Hour Meters - Trumeter - design &...
AC and DC Hour Meters
Go to www.trumeter.com for further information
470 Series 460 Series 300 Series
Mec
hani
cal D
ata
DisplayAC: 5 integers, 2 decimalsDC: 6 integers, 1 decimalAC indicator without reset
AC: 5 integers, 2 decimalsDC: 6 integers, 1 decimal
without reset
AC: 5 integers, 2 decimalsDC: 6 integers, 1 decimal
without reset
Digit Height 0.16” (4mm) 0.16” (4mm) 0.16” (4mm)
Digit ColourInteger: white on black
Decimal: 50 Hz – red on blackDecimal: 60 Hz – red on white
Integer: white on blackDecimal: 50 Hz – red on blackDecimal: 60 Hz – red on white
Integer: white on blackDecimal: 50 Hz – red on blackDecimal: 60 Hz – red on white
Counting Range AC: 99,999.99 h, DC: 999,999.9 h
AC: 99,999.99 h, DC: 999,999.9 h
AC: 99,999.99 h, DC: 999,999.9 h
Reading Accuracy AC: 1/100 h (36 sec)DC: 1/10 h (6 min)
AC: 1/100 h (36 sec)DC: 1/10 h (6 min)
AC: 1/100 h (36 sec)DC: 1/10 h (6 min)
Weight 2 oz 2 oz 1 oz
Housing color/Marking Standard Black Standard Black/Neutral Standard Black/Neutral
Elec
tric
al
Dat
a
Operating Voltage (AC) 24, 48, 60, 110, 120, 220, 230, 240, 400 VAC ± 10%, 50 or 60 Hz
24, 48, 60, 110, 120, 220, 230, 240, 400 VAC ± 10%, 50 or 60 Hz
24, 48, 60, 110, 120, 220, 230, 240, 400 VAC ± 10%, 50 or 60 Hz
Operating Voltage (DC) 6-30, 10-80, 110, 220 VDC ± 10%
6-30, 10-80, 110, 220VDC ± 10%
6-12, 12-36, 36-80, 110, 220 VDC ± 10%
Current Consumption: AC: max. 8 mA DC: max. 9 mA
AC: max. 8 mA DC: max. 9 mA
AC: max. 8 mA DC: max. 9 mA
Connection Screw Connection, 1/4” Spade Screw Connection, 1/4” Spade Screw Connection, 1/4” Spade
Am
bien
t C
ondi
tions
Operating Temperature: AC: –13°F to +176°F DC: –4°F to +158°F
AC: –13°F to +176°F DC: –4°F to +158°F
AC: –13°F to +176°F DC: –4°F to +158°F
Storage Temperature: AC: –40°F to +176°F DC: –4°F to +158°F
AC: –40°F to +176°F DC: –4°F to +158°F
AC: –40°F to +176°F DC: –4°F to +158°F
Relative Humidity: Max. 80% at 77°F Max. 80% at 77°F Max. 80% at 77°F
Protection NEMA 4X NEMA 1 (IP40 Front) NEMA 4X(IP66 Front - on request)
NEMA 1 (IP40 Front)NEMA 4X (IP67 Front)
NEMA 6P (IP67 - Totally Sealed Housing)
TAC Models: HMA 460, HMA 470, HMA 300DC Models: HMD 460, HMD 470, HMD 300
Model Dimensions Panel Cut-Out Mounting Ordering
470Flush with aluminum
clamp
Model HMA 470 (AC)Model HMD 470 (DC)
471 Flush with three screws Model HMA 471 (AC)Model HMD 471 (DC)
460 Flush with retainer bracket
HMA 460 (AC)HMD 460 (DC)Voltage/Freq.
461 Surface with DIN railHMA 461 (AC)HMD 461 (DC)Voltage/Freq.
300 Flush With Retainer Bracket
HMA 300 (AC)HMD 300 (DC)
Voltage/Frequency
301 Flush With Retainer Bracket
HMA 301 (AC)HMD 301 (DC)
Voltage/Frequency
302 Flush With Two #6 Screws
HMA 302 (AC)HMD 302 (DC)
Voltage/Frequency
303 Flush With Three #8 Screws
HMA 303 (AC)HMD 303 (DC)
Voltage/Frequency
304 Flush With Retainer Bracket
HMA 304 (AC)HMD 304 (DC)
Voltage/Frequency
www.trumeter.com
North America OfficeTrumeter 702 S. Military TrailDeerfield Beach, FloridaFL 33442, USATel: +1 954 725 6699Email: [email protected]
Asia Pacific DistributorInnovative Design Technologies Sdn. BhdLot 5881, Lorong Iks Bukit Minyak 1Taman Perindustrian Iks, 14000 Bukit TengahPenang, MalaysiaWeb: www.idtworld.comTel: + 604 5015700Email: [email protected]
UK OfficeTrumeter Pilot Mill, Alfred StreetBury, LancashireBL9 9EFTel: +44 161 674 0960Email: [email protected]
CD-HM4PG-DS.v1.1 04/16
1.89 (�Ø48)
1.42 (36)
1.59 (40.5)
2.01 (51)
2.01 (51)
2.05 (52)
1.75 (44.45)
1.30 (33)
1.46 (37)
0.12 (3)
0.12 (3)
2.01 (51)
0.12 (3)
0.95
(24)
0.87
(22)
0.93
(23.
7)
0.93
(23.
7)
1.08
(27.
5)
1.08
(27.
5)
0.15
(3.8
)
0.87
(22)
0.94
(24)
1.46 (37)
0.94
(24)
1.89 (�Ø48)
1.42 (36)
1.59 (40.5)
2.01 (51)
2.01 (51)
2.05 (52)
1.75 (44.45)
1.30 (33)
1.46 (37)
0.12 (3)
0.12 (3)
2.01 (51)
0.12 (3)
0.95
(24)
0.87
(22)
0.93
(23.
7)
0.93
(23.
7)
1.08
(27.
5)
1.08
(27.
5)
0.15
(3.8
)
0.87
(22)
0.94
(24)
1.46 (37)
0.94
(24)
1.89 (�Ø48)
1.42 (36)
1.59 (40.5)
2.01 (51)
2.01 (51)
2.05 (52)
1.75 (44.45)
1.30 (33)
1.46 (37)
0.12 (3)
0.12 (3)
2.01 (51)
0.12 (3)
0.95
(24)
0.87
(22)
0.93
(23.
7)
0.93
(23.
7)
1.08
(27.
5)
1.08
(27.
5)
0.15
(3.8
)
0.87
(22)
0.94
(24)
1.46 (37)
0.94
(24)
1.89 (�Ø48)
Ø0.15 (3.8)
120°
Ø1.
97 (5
0)
Ø2.
29 (5
8)
1.99 (50.5)
2.83 (72)
2.29 (58)
2.53 (64.3)
1.89 (�Ø48)
Ø0.15 (3.8)
120°
Ø1.
97 (5
0)
Ø2.
29 (5
8)
1.99 (50.5)
2.83 (72)
2.29 (58)
2.53 (64.3)
�1.89 (�48)
�1.89 (�48) 1.69 (43)
1.25 (32)
0.24 (6)
1.77 (45+0.5)
Ø1.97 (Ø50+1)1.
77 (4
5+0.
5)
�1.
77 (�
45)
1.38
(35)
1.89 (�Ø48)
�1.89 (�48)
�1.89 (�48) 1.69 (43)
1.25 (32)
0.24 (6)
1.77 (45+0.5)
Ø1.97 (Ø50+1)
1.77
(45+
0.5)
�1.
77 (�
45)
1.38
(35)
1.89 (�Ø48)
Ø2.83 (Ø72)
1.97 (50)
0.24 (6)
0.24 (6)
1.77 (45)
0.87
(22)
0.87
(22)
0.94
(24)
1.14
(29)
Ø0.13 (Ø3.3)
2.13 (54) 2.01 (51)
1.97 (50)
120°
Ø0.15 (Ø3.8)
Ø2.83 (Ø72)
1.97 (50)
0.24 (6)
0.24 (6)
1.77 (45)
0.87
(22)
0.87
(22)
0.94
(24)
1.14
(29)
Ø0.13 (Ø3.3)
2.13 (54) 2.01 (51)
1.97 (50)
120°
Ø0.15 (Ø3.8)
Note: Specify 1/4” spade or screw terminals
1.89 (�Ø48)
Ø0.15 (3.8)
120°
Ø1.
97 (5
0)
Ø2.
29 (5
8)
1.99 (50.5)
2.83 (72)
2.29 (58)
2.53 (64.3)
1.89 (�Ø48)
Ø0.15 (3.8)
120°
Ø1.
97 (5
0)
Ø2.
29 (5
8)
1.99 (50.5)
2.83 (72)
2.29 (58)
2.53 (64.3)
�1.89 (�48)
�1.89 (�48) 1.69 (43)
1.25 (32)
0.24 (6)
1.77 (45+0.5)
Ø1.97 (Ø50+1)
1.77
(45+
0.5)
�1.
77 (�
45)
1.38
(35)
1.89 (�Ø48)
1.89 (�Ø48)
1.42 (36)
1.59 (40.5)
2.01 (51)
2.01 (51)
2.05 (52)
1.75 (44.45)
1.30 (33)
1.46 (37)
0.12 (3)
0.12 (3)
2.01 (51)
0.12 (3)
0.95
(24)
0.87
(22)
0.93
(23.
7)
0.93
(23.
7)
1.08
(27.
5)
1.08
(27.
5)
0.15
(3.8
)
0.87
(22)
0.94
(24)
1.46 (37)
0.94
(24)
1.89 (�Ø48)
1.42 (36)
1.59 (40.5)
2.01 (51)
2.01 (51)
2.05 (52)
1.75 (44.45)
1.30 (33)
1.46 (37)
0.12 (3)
0.12 (3)
2.01 (51)
0.12 (3)
0.95
(24)
0.87
(22)
0.93
(23.
7)
0.93
(23.
7)
1.08
(27.
5)
1.08
(27.
5)
0.15
(3.8
)
0.87
(22)
0.94
(24)
1.46 (37)
0.94
(24)
1.89 (�Ø48)
1.42 (36)
1.59 (40.5)
2.01 (51)
2.01 (51)
2.05 (52)
1.75 (44.45)
1.30 (33)
1.46 (37)
0.12 (3)
0.12 (3)
2.01 (51)
0.12 (3)
0.95
(24)
0.87
(22)
0.93
(23.
7)
0.93
(23.
7)
1.08
(27.
5)
1.08
(27.
5)
0.15
(3.8
)
0.87
(22)
0.94
(24)
1.46 (37)
0.94
(24)
Ø2.83 (Ø72)
1.97 (50)
0.24 (6)
0.24 (6)
1.77 (45)
0.87
(22)
0.87
(22)
0.94
(24)
1.14
(29)
Ø0.13 (Ø3.3)
2.13 (54) 2.01 (51)
1.97 (50)
120°
Ø0.15 (Ø3.8)
Ø2.83 (Ø72)
1.97 (50)
0.24 (6)
0.24 (6)
1.77 (45)
0.87
(22)
0.87
(22)
0.94
(24)
1.14
(29)
Ø0.13 (Ø3.3)
2.13 (54) 2.01 (51)
1.97 (50)
120°
Ø0.15 (Ø3.8)