DE2016 PAPER TEMPLATE

FORMATTING GUIDELINES FOR PAPER SUBMISSIONS

For blind review do not fill in your name(s) hereFor blind review do not fill in your affiliation(s) here

For blind review do not fill in your e-mail address(es) here

AbstractThis document presents the guidelines for DE2016 paper submissions. The maximum length of the abstract is 200 words. The total length of the paper should be maximum 5,000 word for full papers; or maximum 2,000 words for short papers. The deadline for submissions is 1 February 2016.

Keywords: please supply five keywords.

IntroductionThis document presents the guidelines for DE2016 full and short paper submission. Note that there are separate guideline documents for the Design case and Special session submissions. All submission templates can be downloaded from the website (http://designandemotion.org/de2016).

Please follow the instructions below when setting up your document, or preferably, write your paper in this document template. This document shows how the paper should look. It has been created in accord with the publishing guidelines; authors are encouraged to use it as the basis for their manuscript. The program committee aims to publish the DE2016 conference proceedings following high academic standards.

Title and authorsOn the first page, give the full title and subtitle of your paper. The paper uploaded for blind review must not have any hint of the author name(s), email address(es) or affiliation(s). If the paper is accepted by the program committee after the blind review, you must replace the lines below the subtitle with the author name(s), email address(es) and affiliation(s) and upload the final version to the conference’s online submission system.

Removing metadata from the paperThe double-blind review process requires that the paper is free of any information that could identify the author(s). Note that in addition to the text, the document’s metadata can also contain identifying information. For example, word documents automatically save author information based on the owner of the computer on which the file is edited and saved. Remove all metadata from the document file just prior to submission, using the following steps:

PC Windows (Word 2010, Word 2013)1. Within Word, while having the document open, click the File tab, and then click Info

2. Click Check for Issues, and then click Inspect Document.

3. In the Document Inspector dialog box, make sure the check box for Document properties and personal information is checked

4. Click Inspect

5. Click Remove All next to Document properties and personal information

1

Mac OS X (Word 2011)1. In the Word menu, click Preferences.

2. Under Personal Settings, click Security.

3. Under Privacy options, select the Remove personal information from this file on save checkbox.

4. Save the document.

The layout of the paperThe manuscript should use the embedded styles, and otherwise contain as little formatting as possible. The following guidelines should be adhered:

Language of submission is English. The paper size adopted is A4 portrait (29.7 cm height X 21cm width). The document margins are set to: top 2 cm; bottom 2 cm; inside and outside 1.75 cm; header 0.75 cm;

footer 1 cm. The text area is 17.5 by 25.7 cm. The standard font to be used for running text is Arial 10 pt. The full title and subtitle is provided on the first page, and an abstract of max. 200 words. Authors use APA reference citation style.

Working with stylesStyles in MS Word provide a convenient way to structure the style of your document. In the Styles panel (see Figure 1), you can see which style is applied to the text at the current cursor position. For instance, this piece of text has the style ‘Normal’, while the heading above this text has the style ‘Heading 1’. If you click around different elements of the document, you will see that every element has a certain style.

Figure 1: The MS Word Styles panel

All the styles that you need for your manuscript have already been embedded in this document. This makes it quick and easy to apply the right formatting to the right text, without having to think about font, text size, etc. Clicking on the style button will convert the currently selected text to that style. This allows two ways of working:

1. Format before typing. For example, before you start writing the caption underneath a picture, with the cursor at the right position, you click the ‘Caption’ style button and start writing your caption.

2. Format after typing. For example, after writing the caption underneath a picture, select the entire caption and click the ‘Caption’ style button.

Section headingsPlease do not number sections or subsections. Hierarchy should arise by using different font sizes. Please do not use all-caps text in headings. For first-level section headings use the style ‘Heading 1’ (Arial bold 14 pt).

Subsection headingsSubsection headings are the second-level headings. For Subsection headings use the style ‘Heading 2’ (Arial bold 12 pt).

2

Sub-subsection headingsIdeally the manuscript should not have more than two section levels. However, if you need to use third-level heading, use style ‘Heading 3’ Arial bold 10 pt.

Figures and tablesFigures and tables should appear within the text. Figures and tables should be enumerated and referenced: (Figure 1) or (Table 1). All tables and figures should have a caption and source indication, using the appropriate styles: ‘Figure Caption’, ‘Table Caption’, ‘Table Cell’, and ‘Table note’. Tables should be editable (i.e. no image formats). Figures should be both inserted in the text and sent separately as high-resolution .jpg or .tif files. A maximum of 20 figures is allowed for full papers, 10 for short papers and 10 for case studies.

Table 1. Conference keydates

Date Event

February 1 Deadline for all submissions (full papers, short papers, design cases, and special sessions).

April 1 Notification of acceptance

May 1 Submission of camera-ready manuscripts

July 15 Deadline for early registration - required for authors to be in proceedings

September 27-30 Conference in Amsterdam

Source: The DE2016 website (DE2016 organizing committee, 2015).

Table captions go above tables and figure captions go below figures. All figures and tables are aligned to the left of a page and appear either on the same page as the first reference to the figure or table or on the first page after the first reference.

Figure 2. The DE2016 conference flyer

Source indications for tables go below the table, source indications for figures should be part of the caption. In case any images from third parties are used, send a permission statement from the copyright holder(s) to publish the image. Together with the camera-ready submission of your paper, you will be asked to fill in a copyright permission statement form. Images that potentially infringe copyright cannot be published.

3

Citations and referencesIn the references section at the end include the bibliographic sources used in the running text organized in alphabetical order. For every in-text citation there should be a full citation in the reference list and vice versa. References should follow the APA writing style. Please use footnotes only for explanatory notes, not for source citation.

The reference list at the end of this template shows examples of a conference paper (Bucolo and Matthews, 2011), a journal article (Evans, 2011), a book by Norman (2004), a book chapter by Jones (2003), and a website (DE2016 Organizing committee, 2015).

For a list of APA reference examples, see http://guides.is.uwa.edu.au/c.php?g=324904.

AcknowledgementsThese may be included – only if necessary – at the end of the text (60 words max).

Submitting your paperCreate a compressed zip file with your paper together with tables and images. For the paper, only MS Word files (preferably .docx) are accepted. Images must be .jpg, .png, or .tif files. Please make sure you check your paper thoroughly and have removed all the metadata (see above) before uploading it to the conference system.

ReferencesBucolo, S., Matthews, J. (2011) Design-led Innovation – Exploring the synthesis of needs, technologies and business models. In J. Buur

(Ed.), Proceedings of the Participatory Innovation Conference 2011 (pp. 351-354). Brisbane: QUT.

Evans, M. (2011). Empathizing with the Future: Creating next-next generation products and services. The Design Journal, 14(2), 231-252.

Jones, K. (2003). Emotion, Weakness of Will, and the Normative Conception of Agency. In A. Hatzimoysis (Ed.), Philosophy and the Emotions (pp. 181-200). Cambridge: Cambridge University Press.

Norman, D.A. (2004). Emotional Design: Why we love (or hate) everyday things. New York, NY: Basic Books.

DE2016 Organizing committee. (2015). D&E2016. 10th International Conference on Design&Emotion. Retrieved from http://designandemotion.org/de2016/

4