A.BRATT & SON LIMITED Abbeyfield Road,Lenton Ind… · A.BRATT & SON LIMITED Abbeyfield Road,Lenton...

A. BRATT & SON LIMITED Abbeyfield Road, Lenton Ind. Est., Nottingham. NG7 2SZ

Tel: (0115) 986 6851 / 986 2221 Fax: (0115) 986 1991

www.brattsladders.comFM 30770

COMPANY PROFILEBratts have been making ladders since 1895.We supply every major electricity company in the UK with non-conductive access equipment.We also supply telecom and gas utilities, chemical, oil, rail, aviation, construction and similarindustries worldwide.We are the only manufacturer of BS1129 Class 1 Kitemark Timber and BS EN131 Kitemark GlassFibre ladders, stepladders and specialist access products for industrial use.We are therefore in aunique position to offer information on both. We also supply a large range of BS2037 Class 1Kitemark Aluminium ladders and stepladders.The British Standard Kitemark (BS) is only awarded to products that pass strict regular testing to ahigher standard than EN131.This guarantees you continuous audited quality.All our Glass Fibre products also comply with ANSI 14-5 and ESI 13-1.We worked with the HSE (Health and Safety Executive) to help produce the Work at HeightRegulations and the HSE Guidance for Employees.We can therefore advise on ladder andstepladder use within these procedures.We are members of the LA (Ladder Association) and LaSMA (Ladders & Systems ManufacturersAssociation).We also sit on the B/512 Ladder and Stepladder Standards Committee at the British StandardsInstitute with the HSE, DTi, and our EEC partners.In response to requests from a number of major companies we have recently developed the SafeLadder System© which has proved very successful.

Bratts can manufacture access equipment to your specification, quote for repairs, run certifiedtraining courses and advise on maintenance routines.

Ladder Specifications

British Standard Class 1 BS 2037 (Aluminium) or BS 1129 (Wood) or BS 7377 (Step-stools) - Heavy Industrial UseDuty rating 130kg (26.5 stone) - Maximum vertical static load 175kg.

BS EN131 and EN131 (Previous Class 2) - Light Trade UseDuty rating 115kg (18 stone) - Maximum vertical static load 150kg.

British Standard Class 3 BS 2037 (Aluminium) or BS 1129 (Wood) - Domestic DIY UseDuty rating 95kg (15 stone) - Maximum vertical static load 125kg.

It is important that you choose the ladders that best fit your needs. E.g. If you are a builder ortradesman you should use Class 1 or BS EN131 products as per the HSE guidance.

Even if you are looking at ladders for home use you need to think about buying equipment thatmeets the EN 131 standard.They will be safer, last longer and probably work out more economicalover the longer term.

If you do not find anything suitable in this catalogue please contact us we will bemore than happy to assist you.

TEL: 0115 986 6851 or 2221FAX: 0115 986 1991E-mail: [email protected]: www.brattsladders.com

BESPOKE DESIGNS

A SMALL SAMPLE OF CUSTOMER’S

PROBLEMS SOLVED

www.bratts ladders.com

1G

LA

SS

FIB

RE

G L A S S F I B R E I N D E X

Single Section Ladders 2Double Extension Ladders 3Triple Extension Ladders 4Surveyors Ladders 5Combination Ladders 6Roof Ladder 7Double Sided Step 7Swingback Steps 8Platform Steps 9Vision 360º Platform 10B-DEK Platform 11

SPECIFICATIONSNon-conductive materialLaddersStiles 84 x 30mm Pultruded Channel Heavy Duty SectionGlassfibre Rung 30 x 30mm Pultruded Box SectionAluminium Alloy Rung 32mm Diameter Round Castellated RungRungs Fitted At 250mm CentresComplies With ANSI 14.5 & ESI 13.1Kitemarked (where indicated) BS EN131Designed For Heavy Industrial Use

StepsStiles 84 x 30mm Pultruded Channel Heavy Duty SectionBackleg 42 x 36mm Pultruded Channel Section67º Glassfibre Tread Serrated For Grip 67º Aluminium Tread Serrated For Grip Rear Cross Braces For Added Life

UsageElectrical installations and maintenanceChemical industries and general building trades

0115 986 6851 • 0115 986 2221

GL

AS

SF

IBR

ES I N G L E S E C T I O N L A D D E R S

Aluminium Rung - GL1 Range

• Available in both Aluminium rung and all fibre versions• Special rung joints - strong anti twist fixing• Heavy duty channel section• Heavy duty rubber feet for prolonged life• Fully repairable• All items listed here are Kitemarked BS EN131

ORDERING CODES LENGTH RUNGS PER APPROXALLOY RUNG G/FIBRE RUNG CLOSED SECTION WEIGHT

GL1 09 AFL 09 2.35m 9 7kgGL1 12 AFL 12 3.05m 12 9kgGL1 14 AFL 14 3.55m 14 11kgGL1 16 AFL 16 4.10m 16 14kgGL1 19 AFL 19 4.83m 19 16kg

Glassfibre - AFL Range

2

KM 37107KitemarkedBSEN131


D O U B L E E X T E N S I O N L A D D E R SG

LA

SS

FIB

RE


3


• Available in both Aluminium rung and all fibre versions• Special rung joints - strong anti twist fixing• Heavy duty channel section• Wall running wheels• Auto locking clutch - arrests every rung• Optional rope operation• Heavy duty rubber feet for prolonged life• Fully repairable• All items listed here are Kitemarked BS EN131

ORDERING CODES LENGTH LENGTH RUNGS PER APPROXALLOY RUNG G/FIBRE RUNG CLOSED EXTENDED SECTION WEIGHT

GL2 09 AFD 09 2.35m 4.05m 9 14kgGL2 12 AFD 12 3.05m 5.55m 12 18kgGL2 14 AFD 14 3.55m 6.30m 14 22kgGL2 16 AFD 16 4.10m 7.55m 16 28kgGL2 19 AFD 19 4.83m 8.85m 19 32kg

Add ‘R’ to codes for rope operation, e.g. GL2R 09

Glassfibre - AFD Range



0115 986 6851 • 0115 986 2221

4G

LA

SS

FIB

RE

T R I P L E S E C T I O N L A D D E R S


• Available in both Aluminium rung and all fibre versions• Special rung joints - strong anti twist fixing• Heavy duty channel section • Wall running wheels• Auto locking clutch - arrests every rung• Optional rope operation• Heavy duty rubber feet for prolonged life• Fully repairable• All items listed here are Kitemarked BS EN131

ORDERING CODES LENGTH LENGTH RUNGS PER APPROXALLOY RUNG G/FIBRE RUNG CLOSED EXTENDED SECTION WEIGHT

GL3 09 AFT 09 2.55m 5.87m 9 21kgGL3 12 AFT 12 3.26m 7.45m 12 27kgGL3 14 AFT 14 3.71m 9.25m 14 34kg

Add ‘R’ to codes for rope operation, e.g. GL3R 09

Glassfibre - AFT Range




5G

LA

SS

FIB

RE

S U R V E Y O R S L A D D E R S

Aluminium Rung - GFSER Range Aluminium Rung - GFSER Range

ORDERING CODES NUMBER OF LENGTH LENGTH RUNGS PER APPROXALLOY RUNG SECTIONS CLOSED EXTENDED SECTION WEIGHT

GFSER2 2 1.2m 2.08m 8 8.5kgGFSER3 3 1.2m 3.10m 12 12.5kgGFSER4 4 1.2m 4.11m 16 17kg

• Special rung joints - strong anti twist fixing• Heavy duty channel section• Purpose made quick fit joint• Heavy duty rubber feet for prolonged life• Fully repairable• Can be fitted with pole bow & stability devices, see pages 41-43• All items listed here are Kitemarked BS EN131



0115 986 6851 • 0115 986 2221

6G

LA

SS

FIB

RE

C O M B I N AT I O N L A D D E R S

ORDERING CODES LENGTH RUNGS PER APPROXALLOY RUNG G/FIBRE RUNG CLOSED SECTION WEIGHT

GFC06 AFCO6 1.53m 2.14m 17kgGFC07 AFC07 1.78m 2.64m 19kgGFC08 AFC08 2.03m 3.15m 21kg GFC09 AFC09 2.29m 3.66m 23kgGFC10 AFC10 2.54m 3.92m 26kg

Glassfibre - AFC / GFC Range Glassfibre - AFC / GFC Range

• Available in both Aluminium alloy rung and all fibre versions• Anti-slip tread• Ideal for loft access• Heavy duty channel section • Strong alloy locking bars • Heavy duty rubber feet for

prolonged life• Fully repairable• Manufactured with BS EN131 compliant materials


7G

LA

SS

FIB

RER O O F L A D D E R

D O U B L E S I D E D S T E P

ROOF LADDER• With Aluminium alloy rung, anti-slip tread• Heavy duty channel section • Strong alloy rubber faced support bars • Heavy duty rubber feet for

prolonged life• Fully repairable• Manufactured with BS EN131

compliant materials

DOUBLE SIDED STEP• Available in both alloy tread and all

fibre versions• Anti-slip tread• Heavy duty channel section • Heavy duty rubber feet for

prolonged life• Complies with ANSI 14.5 & ESI 13-1• Fully repairable• All items listed here are Kitemarked

BS EN131

ORDERING CODES LENGTH NUMBER APPROXALUMINIUM TREAD G/FIBRE TREAD CLOSED OF TREADS WEIGHT

GTS04 AFDS04 1.07m 4 8.5kgGTS05 AFDS05 1.32m 5 10.0kgGTS06 AFDS06 1.58m 6 12.5kg GTS07 AFDS07 1.83m 7 14.0kgGTS08 AFDS08 2.09m 8 15.5kgGTS09 AFDS09 2.34m 9 19.0kgGTS10 AFDS10 2.59m 10 20.5kg

Glassfibre - GLRL Range

Glassfibre - GTS / AFDS Range

ORDERING LENGTH

RUNGS PER APPROXCODES SECTION WEIGHT

GL12RL 3.5m 12 15kgGL19RL 5.5m 19 21kg


0115 986 6851 • 0115 986 2221

8G

LA

SS

FIB

RE

S W I N G B A C K S T E P S

Aluminium Tread - GSB Range Glassfibre Tread - AFSB Range

• Available in both Aluminium tread and all fibre versions• Glassfibre reinforced plastic top / tool holder• Locking side stays• Anti-slip tread• Heavy duty channel section • Heavy duty rubber feet for prolonged life• Complies with ANSI 14-5 & ESI 13-1• Fully repairable• All items listed here are Kitemarked BS EN131

ORDERING CODES OVERALL NUMBER APPROXALUMINIUM TREAD G/FIBRE TREAD LENGTH OF TREADS WEIGHT

GSB04 AFSB04 1.02m 4 8.5kgGSB05 AFSB05 1.25m 5 10.0kgGSB06 AFSB06 1.53m 6 12.5kg GSB07 AFSB07 1.78m 7 14.0kgGSB08 AFSB08 2.03m 8 15.5kgGSB09 AFSB09 2.29m 9 19.0kgGSB10 AFSB10 2.54m 10 20.5kgGSB11 AFSB11 2.79m 11 22.0kgGSB12 AFSB12 3.04m 12 24.0kgGSB13 AFSB13 3.29m 13 26.0kgGSB14 AFSB14 3.54m 14 28.0kg

KM 37107Kitemarked BS EN131



9G

LA

SS

FIB

RE

Aluminium Tread - GSP Range Glassfibre Tread - AFPS Range

• Available in both Aluminium tread and all fibre versions• Glassfibre reinforced plastic top / tool holder• Folding platform• Locking side stays• Anti-slip tread• Heavy duty channel section • Heavy duty rubber feet for prolonged life• Complies with ANSI 14-5 & ESI 13-1• Fully repairable• All items listed here are Kitemarked BS EN131

P L AT F O R M S T E P S

ORDERING CODES OVERALL PLATFORM NUMBER APPROXALUMINIUM TREAD G/FIBRE TREAD LENGTH HEIGHT OF TREADS WEIGHT

GSP04 AFPS04 1.63m 0.93m 4 9.5kgGSP05 AFPS05 1.88m 1.18m 5 11.0kgGSP06 AFPS06 2.13m 1.43m 6 12.5kg GSP07 AFPS07 2.39m 1.68m 7 14.5kgGSP08 AFPS08 2.64m 1.93m 8 16.5kgGSP09 AFPS09 2.90m 2.18m 9 19.0kgGSP10 AFPS10 3.15m 2.43m 10 21.5kgGSP11 AFPS11 3.40m 2.68m 11 23.0kgGSP12 AFPS12 3.65m 2.93m 12 25.0kgGSP13 AFPS13 3.90m 3.18m 13 28.5kgGSP14 AFPS14 4.15m 3.43m 14 30.5kg



0115 986 6851 • 0115 986 2221

10G

LA

SS

FIB

RE

V I S I O N 3 6 0 º P L AT F O R M

Glassfibre - XPLT / AFXPLT Range

Optional extras

• 360° workingplatform - 550mm x 400mm

• Glass fibre framewith aluminium treads

• Enclosedplatform on 3sides for safety

• Insulated andnon-conductivewhilst in use

• Ergonomically designed for industrialwork

• HSE Work At Height Regs 2005compliant to work two-handed forshort duration jobs complies to:ANSI 14-5 and ESI 13-1

Optional Extras• Security webbing strap across

open side - • Powder coated handrail - • Plastic coated handrail - • Wheels at rear - • Outriggers -• Laddertag for inspection and

maintenance - • Marking with company details for

security -• Detachable tool tray - • Open mesh foot - • All items listed here are Kitemarked

BS EN131

ORDERING CODES CLOSED PLATFORM NO. OF APPROXWIDTH

OPEN ALUMINIUM TREAD G/F TREAD HEIGHT HEIGHT TREADS WEIGHT SPAN

XPLT02 AFXPLT02 1.55m 0.46m 2 11.5kg 530mm 875mmXPLT03 AFXPLT03 1.80m 0.71m 3 13.5kg 560mm 1035mmXPLT04 AFXPLT04 2.05m 0.96m 4 14.0kg 590mm 1095mmXPLT05 AFXPLT05 2.31m 1.19m 5 16.0kg 620mm 1355mmXPLT06 AFXPLT06 2.56m 1.44m 6 19.0kg 650mm 1525mmXPLT07 AFXPLT07 2.82m 1.64m 7 20.0kg 680mm 1685mmXPLT08 AFXPLT08 3.07m 1.89m 8 22.0kg 710mm 1845mmXPLT09 AFXPLT09 3.32m 2.19m 9 23.0kg 740mm 2005mmXPLT10 AFXPLT10 3.57m 2.44m 10 24.0kg 770mm 2165mmXPLT11 AFXPLT11 3.82m 2.69m 11 26.0kg 800mm 2325mm



11G

LA

SS

FIB

RE

B - D E K P L AT F O R M

B-DEK

A simple, non-conductive platform for useanywhere. Made from high quality, BScompliant raw materials

• The platform height is approx 450mm but can be made to your own specifications

• The platform is 600mm x 340mm• In general accordance with EN131,

ANSI 14-5 and ESI 13-1 but is not Kitemarked

ORDERING OVERALL PLATFORMCODES LENGTH HEIGHT

B-DEK 1.35m 450mm

0115 986 6851 • 0115 986 2221

12 T I M B E R I N D E XT

IMB

ER

Single Section Ladder 13Double Extension Ladder 13Triple Extension Ladder 14Window Cleaning ‘A’ Ladders 15Roof Ladder 16Shelf Ladder 16Swingback Step 17Folding Platform Step 17Double Sided Step 18Folding Trestle 18Staging 19Loft Ladder 19

SPECIFICATIONSLaddersStiles: 72 x 32mm Douglas Fir Rung: Barrelled shaped American AshFittings: Steel BZP rust proofedPolyurethane exterior varnish finishedKitemarked (where indicated) BS 1129 Class 1 IndustrialDesigned For Heavy Industrial Use

StepsStiles: 72 x 28mm or 32mm Douglas Fir Backleg: Mortise and tennoned for long life67º Douglas fir Tread Serrated For Grip Platform Steps: Rear Cross Braces Varnished finishedKitemarked (where indicated) BS 1129 Class 1 IndustrialDesigned For Heavy Industrial Use


13S I N G L E S E C T I O N L A D D E R

D O U B L E E X T E N S I O N L A D D E RT

IMB

ER

SINGLE SECTION LADDERFor timber specification refer to page 12

• Optional tie rods every rung add a T to the code e.g. HDS08T

• All items listed here are Kitemarked BS 1129 class1 industrial unless marked *

DOUBLE SECTION LADDERFor timber specification refer to page 12

• Clutch operation fitted as standard on HHD14 and over.• Optional tie rods every rung add a ‘T’ to the code

e.g. HHD08T• Optional rope operation add a ‘R’ to the code

e.g. HHD08R• All items listed here are Kitemarked

BS 1129 class1 industrial unless marked *

Timber - HDS/GPS Range

Timber - HHD/GPD Range

REFERENCEOVERALL INTERNAL EXTERNAL

RUNGS WEIGHTLENGTH WIDTH WIDTH

HDS08 GPS08* 2.36m 385mm 9 8.0kgHDS10 GPS10* 3.00m 385mm 11 9.0kgHDS12 GPS12* 3.63m 385mm 13 12.0kg HDS14 GPS14* 4.19m 385mm 16 14.0kgHDS16 GPS16* 4.75m 385mm 18 16.0kgHDS18 5.41m 385mm 21 20.0kgHDS20 6.00m 385mm 23 23.0kg

ORDERING CODES OVERALL EXTENDED OVERALL NUMBER APPROXCLASS 1 TRADE LENGTH LENGTH WIDTH OF RUNGS WEIGHT

HHD08 GPD08* 2.36m 4.14m 385mm 9 15.0kgHHD09 GPD09* 2.67m 4.80m 385mm 10 17.0kgHHD10 GPD10* 3.00m 5.41m 385mm 11 18.0kgHHD11 GPD11* 3.28m 5.79m 385mm 12 21.0kgHHD12 GPD12* 3.63m 6.68m 385mm 13 24.0kgHHD14 GPD14* 4.19m 7.70m 385mm 16 29.0kgHHD16 GPD16* 4.75m 8.71m 385mm 18 34.0kgHHD18 5.41m 9.98m 385mm 21 43.0kgHHD20 6.00m 11.0m 385mm 23 52.0kg

KM 02693Kitemarked

BS1129 Class1

KM 02693Kitemarked

BS1129 Class1

0115 986 6851 • 0115 986 2221

14 T R I P L E E X T E N S I O N L A D D E RT

IMB

ER TRIPLE SECTION LADDER

For timber specification refer to page 12

• Clutch operation fitted as standardon HDT12 and over

• Optional tie rods every rung add a‘T’ to the code e.g. HDT08T

• Optional rope operation add a ‘R’to the code e.g. HDT08R

• All items listed here areKitemarked BS 1129 Class 1Industrial unless marked *

N.B. Please specify when orderingif ladders are to be used for liveelectrical work

Triple Extension Ladder - HDT Range

ORDERING CODES OVERALL EXTENDED OVERALL NUMBER APPROX WEIGHTCLASS 1 TRADE LENGTH LENGTH WIDTH OF RUNGS HDT GPT

HDT08 GPT08 2.36m 5.41m 385mm 9 28.0Kg 20.0KgHDT10 GPT10 3.00m 7.70m 385mm 10 30.0Kg 25.0Kg

HDT12R GPT12 3.63m 9.22m 385mm 13 38.0Kg 30.0KgHDT14R 4.19m 10.m 385mm 16 47.0KgHDT16R 4.75m 12.80m 385mm 18 70.0KgHDT18R 5.41m 14.30m 385mm 21 90.0KgHDT20R 6.00m 15.82m 385mm 23 101.0Kg

KM 02693Kitemarked

BS1129 Class1


15W I N D O W C L E A N I N G ‘A’ L A D D E R S

S I N G L E / D O U B L ET

IMB

ER

SINGLE SECTION LADDER• Stiles 64 x 28 Douglas fir• Optional rubber top block

DOUBLE SECTION LADDER• Base splayed for stability• Optional rubber top block

Timber - WCP Range

Timber - WCPD Range

ORDERING OVERALL NUMBER APPROXCODES LENGTH OF RUNGS WEIGHT

WCPO7 2.03m 6 6.0kgWCP08 2.36m 7 7.0kgWCP09 2.67m 8 8.0kg WCP10 3.00m 9 9.0kgWCP11 3.28m 10 10.0kgWCP12 3.63m 13 11.0kg

ORDERING OVERALL EXTENDED NUMBER OF APPROXCODES LENGTH LENGTH RUNGS WEIGHT

WCPD08 2.36m 4.14m 7 13.0kgWCPD09 2.67m 4.80m 8 15.0kg WCPD10 3.00m 5.41m 9 19.0kgWCPD11 3.28m 5.79m 10 22.0kgWCPD12 3.63m 6.68m 13 25.0kg

0115 986 6851 • 0115 986 2221

16R O O F L A D D E RS H E L F L A D D E R

TIM

BE

R

ROOF LADDER• Steel ridge hook• Large rubber tyre wheels• Douglas fir rails 45mm x 22mm• Also available as articulated hip ladder

SHELF LADDER • Horizontal top rail• Splayed or parallel as required• Optional hooks at top

Shelf Ladder - SL Range

Roof Ladder - RL Range

ORDERING OVERALL APPROXCODES LENGTH WEIGHT

RL10H 3.58m 14.0kgRL12H 3.96m 15.0kgRL14H 4.72m 17.0kg RL16H 5.10m 19.0kgRL18H 5.50m 21.0kg

ROOF LADDER HEAD UNIT


SL07 1.97m 5.0kgSL08 2.25m 6.0kgSL09 2.47m 7.0kgSL10 2.72m 8.0kgSL11 2.97m 10.0kgSL12 3.22m 11.0kgSL13 3.47m 12.0kg


RLEX5 1.52m 7.0kgRLEX7 2.28m 9.0kgRLEX10 3.05m 12.0kg

ROOF LADDER EXTENSION SECTIONS


17S W I N G B A C K S T E P

F O L D I N G P L AT F O R M S T E PT

IMB

ER

SWINGBACK STEP• Mortised & tennoned back rails for

prolonged life• Treads spaced at 250mm centres• Lightweight version available

FOLDING PLATFORM STEP • Robust self locking platform• Screwed and glued back rails• Lightweight version if required

Folding Platform Step

Swingback Step - HPS Range

ORDERING NUMBER OVERALL APPROXCODES TREADS LENGTH WEIGHT

HPS03 3 0.72m 7.0kgHPS04 4 0.97m 8.0kgHPS05 5 1.22m 9.0kg HPS06 6 1.47m 10.0kgHPS07 7 1.72m 11.0kgHPS08 8 1.97m 13.0kgHPS09 9 2.25m 16.0kgHPS10 10 2.47m 20.0kgHSP11 11 2.72m 24.0kgHSP12 12 2.97m 28.0kg

ORDERING TREAD OVERALLVERTICAL

APPROXCODES NUMBER LENGTH

HEIGHT TOWEIGHTPLATFORM

FPS04 4 1.62m 0.91m 11.0KgFPS05 5 1.88m 1.14m 13.0KgFPS06 6 2.13m 1.37m 14.0KgFPS07 7 2.39m 1.63m 16.0KgFPS08 8 2.84m 1.84m 18.0KgFPS09 9 3.10m 2.06m 20.0KgFPS10 10 3.35m 2.34m 25.0KgFPS11 11 3.61m 2.56m 30.0kgFPS12 12 3.86m 2.79m 33.0kgFPS13 13 4.10m 3.02m 36.0kgFPS14 14 4.37m 3.27m 40.0kgFPS15 15 4.62m 3.50m 45.0kg

KM 02693Kitemarked

BS1129 Class1

KM 02693Kitemarked

BS1129 Class1

0115 986 6851 • 0115 986 2221

18D O U B L E S I D E D S T E P

F O L D I N G T R E S T L ET

IMB

ER

DOUBLE SIDED STEP• Heavy duty locking hinge• Manufactured in accordance with

BS 1129 Class 1 Ind


PT06 1.78m 18.0kgPT08 2.38m 23.0kgPT10 2.97m 26.0kgPT12 3.58m 35.0kgPT14 3.96m 42.0kgPT16 4.80m 49.0kg

Double Sided Step - DSFS Range

Folding Trestle

FOLDING TRESTLE • Heavy duty locking hinge• Morticed and tennoned rails• Lightweight version if required

KM 02693Kitemarked

BS1129 Class1

ORDERING NUMBER OVERALL APPROXCODES TREADS LENGTH WEIGHT

DSFS03 3 0.84m 10.0kgDSFS04 4 1.09m 11.0kgDSFS05 5 1.35m 13.0kgDSFS06 6 1.60m 14.0kgDSFS07 7 1.85m 16.0kgDSFS08 8 2.11m 18.0kgDSFS09 9 2.36m 22.0kgDSFS10 10 2.61m 25.0kgDSFS11 11 2.87m 29.0kgDSFS12 12 3.12m 33.0kg


19T

IMB

ER

S TA G I N GLO F T L A D D E R

STAGING• Wire reinforced • Easily repaired decking

LOFT LADDER• Supplied complete with timber frame

outside measurements 540mm x1130mm

• Fully insulated trap door (30mm thick)• Fully assembled for quick and

simple fitting

Loft Ladder - TMM range

Staging - LS Range


LS06 1.78m 7.0kgLS08 2.39m 8.0kgLS10 2.97m 11.0kgLS12 3.58m 14.0kgLS14 4.19m 16.0kgLS16 4.80m 20.0kgLS18 5.41m 24.0kgLS20 6.01m 28.0kgLS22 6.63m 33.0kgLS24 7.24m 38.0kg

CODES DESCRIPTION

TMM26 Midmade loft ladderTMM26X Extension section for ceiling heights of 3.20mTMH26 Midmade handrail

KM 02693Kitemarked

BS1129 Class1

0115 986 6851 • 0115 986 2221

20 A LU M I N I U M I N D E XA

LU

MIN

IUM

Single Section Ladder 21Double Extension Ladder 21Triple Extension Ladder 22D Rung Trade Ladders 23Roof Ladder & Extensions 24Combination Ladders 25-26 Window Cleaning ‘A’ ladders 27Surveyors Ladders 28Fruit Pickers Ladder 28Shelf Ladder 28Folding Platform Steps 29Swingback Steps 30-31Double Sided Step 31Fixed Platform Steps 32Folding Trestle 33Light Weight Staging 33Universal Folding Ladder 34Telescopic Extend & Climb 35Tiger Combination Ladder 35Loft Ladders 36National Grid Ladders & Fittings 37

SPECIFICATIONSLaddersLadders manufactured from hollow seamless Aluminium extrusions with radiusedcorners for extra strength Sizes vary in depth and width according to size of ladder Rungs either 24mm or 30mm diameter serrated tube fitted through stiles at astandard rise of 250mm by a special locking method to prevent turning and forincreased strengthEnds of ladder stiles fitted with rubber plugsKitemarked (where indicated) BS 2037 Class 1 IndustrialDesigned For Heavy Industrial UseStepsManufactured from Aluminium channelsfitted with 80/89mm deep treads fitted at a standard rise of 254mm ends fitted with rubber plugs Rear Cross diagonal braces for extra life Kitemarked (where indicated) BS 2037 Class 1 IndustrialDesigned For Heavy Industrial Use


21S I N G L E S E C T I O N L A D D E R

D O U B L E E X T E N S I O N L A D D E RA

LU

MIN

IUM

SINGLE SECTION LADDER• Can be manufactured to customers own requirements• Kitemarked BS2037 Class 1 Industrial

DOUBLE EXTENSION LADDER• Can be manufactured to customers own requirements• Kitemarked BS2037 Class 1 Industrial but not those

marked with *• Rope operation can be fitted to ladders with the

reference letters L-E-F-J • Rope operated ladders have a special type of swing clutch

complete with side operated ropes and pulleys • Rope operation CANNOT be fitted afterwards to

push-up extension ladders

Single Section Ladder- SA Range

Double Extension Ladder- DE Range

REFERENCE OVERALLEXTENDED

INTERNAL EXTERNALCLASS STD CLOSED

HEIGHTWIDTH TOP WIDTH RUNGS WEIGHT

1 IND PATTERN LENGTH TOP SECT BOTTOM SECT

DE2.0MK 2.05m 3.58m 259mm 353mm 16 9kgDE2.5MK 2.55m 4.58m 259mm 353mm 20 11kg DE3.0ML 3.05m 5.55m 259mm 353mm 24 15kg DE3.5ML 3.55m 6.55m 259mm 353mm 28 17kg DE4.0ME 4.05m 7.55m 267mm 388mm 32 23kg DE4.0MF 4.05m 7.55m 267mm 388mm 32 27kg DE4.5ME 4.55m 8.55m 267mm 388mm 36 26kg DE4.5MF 4.55m 8.55m 267mm 388mm 36 30kg DE5.0MF 5.05m 9.30m 267mm 388mm 40 33kg DE5.5MF 5.55m 10.05m 267mm 388mm 44 36kg DE6.0MJ 6.05m 11.05m 280mm 414mm 47 52kg DE6.5MJ 6.55m 11.75m 280mm 414mm 51 56kg DE7.0MJ 7.05m 12.75m 280mm 414mm 57 63kg

*DE3.0MK 3.05m 5.58m 259mm 353mm 24 13kg *DE4.0ML 4.05m 7.30m 259mm 353mm 32 19kg *DE4.5ML 4.55m 8.30m 259mm 353mm 36 21kg*DE5.0ML 5.05m 9.30m 259mm 353mm 40 23kg*DE6.0MF 6.05m 11.05m 267mm 388mm 48 39kg *DE6.5MF 6.55m 11.75m 267mm 388mm 52 42kg

Add ‘R’ to codes for rope operation, e.g. DE4.5MFR

REFERENCE OVERALL INTERNAL EXTERNALRUNGS WEIGHTLENGTH WIDTH WIDTH

SA1.5MK 1.55m 278mm 323mm 6 3kgSA2.0MK 2.05m 278mm 323mm 8 4kgSA2.5MK 2.55m 278mm 323mm 10 5kgSA3.0MK 3.05m 278mm 323mm 12 6kgSA3.5MK 3.55m 278mm 323mm 14 7kgSA4.0MK 4.05m 278mm 323mm 16 8kgSA4.5MK 4.55m 278mm 323mm 18 9kgSA5.0ML 5.05m 278mm 323mm 20 12kgSA5.5MF 5.55m 267mm 324mm 22 16kgSA6.0MF 6.05m 267mm 324mm 24 18kgSA7.0MF 7.05m 267mm 324mm 28 20kgSA8.0MJ 8.05m 280mm 344mm 32 32kgSA9.0MJ 9.05m 280mm 344mm 36 36kgSA10.0MJ 10.05m 280mm 344mm 40 40kg

KM 05129Kitemarked

BS2037 1994

KM 05129Kitemarked

BS2037 1994

0115 986 6851 • 0115 986 2221

22 T R I P L E E X T E N S I O N L A D D E RA

LU

MIN

IUM

TRIPLE EXTENSION LADDER• Kitemarked BS2037 Class 1 Industrial • Rope operation can be fitted as an option• Rope operated ladders have a special type

of auto swing clutch complete with sideoperated ropes and pulleys

• Rope operation CANNOT be fittedafterwards to push-up extension ladders

Triple Extension Ladder - TE Range

OVERALLEXTENDED

INTERNAL EXTERNALREFERENCE CLOSED

HEIGHTWIDTH OF WIDTH OF RUNGS WEIGHT

LENGTH TOP SECTION BOTTOM SECTION

TE2.0MD 2.05m 4.80m 276mm 452mm 23 17kgTE2.5MD 2.55m 6.30m 276mm 452mm 29 21kg TE3.0MF 3.05m 7.30m 276mm 452mm 35 32kg TE3.5MF 3.55m 8.80m 276mm 452mm 41 37kg

*TE3.0MD 3.05m 7.30m 267mm 452mm 35 24kg *TE3.5MD 3.55m 8.80m 267mm 452mm 41 27kg *TE4.0MF 4.05m 10.30m 267mm 452mm 47 42kg *TE4.5MF 4.55m 11.80m 267mm 452mm 53 47kg *TE5.0MF 5.05m 13.30m 267mm 452mm 59 52kg *TE6.0MJR 6.05m 15.80m 279mm 482mm 69 87kg *TE7.0MJR 7.05m 18.80m 279mm 482mm 81 101kg

Add ‘R’ to codes for rope operation, e.g.TE3.0MFR

* Products not kitemarked BS2037 Class 1 Industrial are manufactured with the same quality materials and in compliance with the BS EN ISO 9002 Quality System.

KM 05129Kitemarked

BS2037 1994


23D R U N G T R A D E L A D D E R SA

LU

MIN

IUM

• Ladders manufactured from hollowseamless Aluminium box section (sizesvary according to size of ladder)

• Large ‘D’ shaped rungs fitted at 75°working angle by a special lockingmethod for increased strength and toprevent turning

• Ends of ladders fitted with rubber plugs

REFERENCEOVERALL INTERNAL EXTERNAL

RUNGS WEIGHTLENGTH WIDTH WIDTH

TDS 20 1.85m 280mm 340mm 6 4.5kgTDS 25 2.50m 280mm 340mm 8 5.5kgTDS 30 3.05m 280mm 340mm 10 7kgTDS 35 3.65m 280mm 340mm 12 8kgTDS 40 4.00m 280mm 340mm 13 10kgTDS 45 4.55m 280mm 340mm 15 11kgTDS 50 5.15m 280mm 340mm 17 14kgTDS 55 5.75m 280mm 340mm 19 15k

OVERALLEXTENDED


HEIGHTWIDTH WIDTH RUNGS WEIGHT

LENGTH TOP SECT BOTTOM SECT

TDD 20 1.85m 3.00m 280mm 410mm 12 9.5kgTDD 25 2.50m 4.20m 280mm 410mm 16 11kg TDD 30 3.05m 5.40m 280mm 410mm 20 13.5kg TDD 35 3.65m 6.60m 280mm 410mm 24 15.5kg TDD 40 4.00m 7.20m 280mm 410mm 26 20kg TDD 45 4.55m 8.40m 280mm 410mm 30 24.5kg TDD 50 5.15m 9.30m 280mm 410mm 34 28kg TDD 55 5.75m 10.40m 280mm 410mm 38 30kg

ALUMINIUM DOUBLE EXTENSION 'D' RUNG LADDERS

OVERALLEXTENDED


HEIGHTWIDTH WIDTH RUNGS WEIGHT

LENGTH TOP SECT BOTTOM SECT

TTD 20 1.85m 4.20m 280mm 480mm 18 13kg TTD 25 2.50m 6.00m 280mm 480mm 24 17kg TTD 30 3.05m 7.80m 280mm 480mm 30 20kg TTD 35 3.60m 9.60m 280mm 480mm 36 28.5kg TTD 40 4.00m 10.50m 280mm 480mm 39 30kg

ALUMINIUM TRIPLE EXTENSION 'D' RUNG LADDERS

ALUMINIUM SINGLE EXTENSION 'D' RUNG LADDERS

KM 45283Kitemarked

BSEN131 1993

0115 986 6851 • 0115 986 2221

24 R O O F L A D D E R & E X T E N S I O N SA

LU

MIN

IUM

Heavy Duty Roof Ladder - ARL Range

Light Duty Roof Ladder - TARL Range

Double Extension Roof Ladder - DARL Range

LIGHT DUTY ROOF LADDER• Wide, serrated flat top rungs• Aluminium ridge hook• Alloy support brackets, rubber sleeved

HEAVY DUTY ROOF LADDER• Ladders manufactured from Single

Section models (SA)• Tubular steel ridge hook complete with

runner wheels• Rubber covered cross supports • Ends of ladders fitted with rubber plugs• Double Extension Roof Ladders also

available ask our sales department for details

• Extensions manufactured from SingleSection models (SA). Fitted with sleevedjoining plates and rubber coveredsupports on underside

DOUBLE EXTENSION ROOF LADDERS

REFERENCELADDER OVERALL WIDTHLENGTH LENGTH AT BASE

ARL3.5MK 3.53m 4.10m 545mmARL4.0MK 4.03m 4.60m 545mmARL4.5MK 4.53m 5.10m 545mmARL5.0ML 5.03m 5.60m 545mmARL5.5ML 5.53m 6.10m 545mmARL6.0ML 6.03m 6.60m 545mmARL6.5ML 6.53m 7.10m 545mm

REFERENCECLOSED EXTD RUNGS

WEIGHTLENGTH LENGTH TOP BOTTOM

D.ARL2.75MK 3.30m 4.70m 9 7 15kgD.ARL3.35MK 3.90m 5.90m 11 9 18kgD.ARL3.95MK 4.50m 7.10m 13 11 21kgD.ARL4.5MK 5.10m 8.30m 15 13 24kg

REFERENCELADDER

RUNGS HEIGHTLENGTH

2.0 ext 2.00m 8 12kg2.5 ext 2.50m 10 13kg3.0 ext 3.00m 12 14kg3.5 ext 3.50m 14 17kg

EXTENSION SECTIONS

EXTENSION SECTIONS

REFERENCELADDER

WEIGHTLENGTH

ARL12 3.66m 11.3kgARL14 4.27m 13.6kgARL16 4.88m 14.5kgARL18 5.50m 16.3kgARL20 6.08m 18.2kg

EXTENDING ROOF LADDER

REFERENCECLOSED EXTENDEDLENGTH LENGTH

AXR34D 3.4m 6.0mAXR39D 3.9m 7.0m


25C O M B I N AT I O N L A D D E R SA

LU

MIN

IUM

2 PART COMBINATION LADDER• This ladder can be used as a Double Extension Ladder

with splayed base, or a Step Ladder or as two SingleSection Ladders

• Manufactured from hollow seamless aluminiumextrusions with radiused corners for extra strength

• Ends of ladder stiles fitted with rubber feet

LADDA-STEP• Designed to be used as a stepladder or a small extension

ladder, this product is made from quality aluminiumextrusions.Treads are 89mm deep. Rungs are of 24mmcorrugated tube fitted at 254mm. Fitted with rubber feet

• Conforming to BS2037 Class 1 Industrial

2 Part CombinationLadder - HL Range

Ladda-Step - LST Range

OVERALLEXTENDED OVERALL MAXIMUMREFERENCE CLOSED

HEIGHT SPAN WIDTHWEIGHT

LENGTH

HL2.0MK 2.05m 3.55m 1.52m 640mm 11kgHL2.5MK 2.55m 4.55m 1.89m 640mm 13kg HL3.0MK 3.05m 5.55m 2.26mm 640mm 15kg

CLOSEDOPEN EXTENDED

TREADS OVERALL OVERALLREFERENCELENGTH

STEP LADDER/ RUNGS WIDTH SPAN

WEIGHTHEIGHT LENGTH

LST 08 2.10m 1.88m 2.90m 8 5 .515m 1.210m 11kg

KM 05129Kitemarked

BS2037 1994

0115 986 6851 • 0115 986 2221

26C O M B I N AT I O N L A D D E R S

2 PA R T / 3 PA R TA

LU

MIN

IUM

2/3 SECTION COMBINATION LADDER• Double sided step ladder• Free standing step ladder• Extension ladder• BS EN131

2/3 Section CombinationLadder - REF Range

2/3 Section CombinationLadder - REF Range

OVERALLEXTENDED RUNGS PERREFERENCE CLOSED STANDING

HEIGHT SECTIONLENGTH

REF23D 2.28m - 3.96m 8 REF28D 2.84m - 5.08m 10 REF34D 3.40m - 5.92m 12

STABILISER PATTERN - 2 SECTION PUSH-UP

SPLAYED BASE PATTERN- HEAVY DUTY 3 SECTION PUSH-UP• Due to the special design of the heavy duty Splayed base

Reform ladders can be used on stairways

CLOSED EXTENDED RUNGS PERREFERENCELENGTH

STANDINGHEIGHT SECTION

REF24TH 2.35m 3.65m 5.15m 8REF27TH 2.65m 4.22m 6.00m 9REF30TH 2.95m 4.78m 6.84m 10


OVERALLEXTENDED RUNGS PERREFERENCE CLOSED STANDING

HEIGHT SECTIONLENGTH

REF20T 2.0m 3.10m 4.25m 7REF26T 2.60m 4.20m 5.96m 9REF31T 3.10m 5.05m 6.80m 11


KM 45283Kitemarked

BSEN131 1993

KM 45283Kitemarked

BSEN131 1993


27W I N D O W C L E A N I N G ‘A’ L A D D E R S S I N G L E / D O U B L E : S W C R A N G E

AL

UM

INIU

M

SINGLE SECTION WINDOW CLEANING LADDER• Rectangular Box section Stiles• Round Rung• Splayed Base• Fitted Rubber Block

DOUBLE EXTENSION WINDOWCLEANING LADDER• Auto Clutch• Splayed Base• Manufactured from class1 materials

Window CleaningLadder - SWC Range

Window CleaningLadder - DWC Range

OVERALLEXTENDED WIDTH NO. OFREFERENCE CLOSED

HEIGHT AT BASE RUNGSWEIGHT

LENGTH

* DWC2.0MK 2.05m 3.58m 545mm 15 9.5kg* DWC2.5MK 2.55m 4.58m 545mm 19 11.5kg* DWC3.0MK 3.05m 5.58m 545mm 23 13.5kg* DWC3.5ML 3.55m 6.58m 545mm 27 17.5kg* DWC4.0ML 4.05m 7.58m 545mm 31 19.5kg* DWC4.5ML 4.55m 8.58m 545mm 35 21.5kg* DWC5.0ML 5.05m 9.58m 545mm 39 23.5kg

REFERENCEOVERALL WIDTH NUMBER

WEIGHTLENGTH AT BASE OF RUNGS

* SWC2.0MK 2.05m 440mm 7 4.5kg* SWC2.5MK 2.55m 525mm 9 5.5kg* SWC3.0MK 3.05m 545mm 11 6.5kg* SWC3.5MK 3.55m 610mm 13 7.5kg

0115 986 6851 • 0115 986 2221

28S U R V E Y O R S L A D D E R

F R U I T P I C K E R L A D D E R & S H E L F L A D D E R A

LU

MIN

IUM

REFERENCENUMBER

LENGTHNUMBER

WEIGHTOF SECTIONS OF RUNGS

SER1 1 0.9m 4 2kgSER2 2 1.8m 8 4kgSER3 3 2.7m 12 6kgSER4 4 3.6m 16 8kgSER5L 5 4.5m 20 12kgSER6L 6 5.4m 24 15kg

SURVEYORS LADDER• Ideal for inspection purposes• Easily Assembled• Can be stored in a car boot

SHELF LADDER• Parallel sided shelf ladder• 89mm deep treads• Overall width 362mm• Fitted timber crossbar or hooks

FRUIT PICKER LADDER• Rectangular Box

section Stiles• Round Rung• Splayed Base• Fitted Rubber Block

Fruit PickerLadder - FP Range

Surveyors Ladder - SER Range

Shelf Ladder - ASL Range

REFERENCEOVERALL NUMBER

WEIGHTLENGTH OF RUNGS

ASL6 1.524m 6 5kgASL7 1.778m 7 5.5kgASL8 2.032m 8 6kgASL9 2.286m 9 6.5kgASL10 2.540m 10 7kgASL11 2.794m 11 7.5kgASL12 3.048m 12 8kg

ASL13HD 3.302m 13 10kgASL14HD 3.556m 14 11kgASL15HD 3.810m 15 12kgASL16HD 4.064m 16 13kg

REFERENCEOVERALL NUMBER

WEIGHTLENGTH OF RUNGS

FP4.0MK 4.05m 16 8kgFP4.5MK 4.55m 18 9kgFP5.0ML 5.05m 20 12kg FP5.5ML 5.55m 22 13kg FP6.0ML 6.05 m 24 14kgFP6.5ML 6.55m 26 1 kg


29F O L D I N G P L AT F O R M S T E P S A

LU

MIN

IUM

TRADE PATTERN PLATFORM STEPS• Platform 330mm X 255mm• 89mm deep treads• Kitemark BS2037 Class 1

HEAVY DUTY PLATFORM STEPS• Platform 406mm x 305mm• 89mm deep treads• Kitemark BS2037 Class 1, unless marked *

Heavy Duty PlatformSteps - AFS Range

Trade Pattern PlatformSteps - TALPS Range

CLOSED HEIGHT TONO. OF

OVERALL OVERALLREFERENCELENGTH PLATFORM

TREADS WEIGHTWIDTH SPAN(INC. PLATFORM)

TALPS2 1.240m .605m 2 5kg .400m .670mTALPS3 1.495m .735m 3 6kg .425m .830mTALPS4 1.750m .965m 4 7kg .450m 1.000mTALPS5 2.005m 1.195m 5 8kg .475m 1.170mTALPS6 2.260m 1.425m 6 9kg .500m 1.345mTALPS7 2.515m 1.665m 7 10.5kg .525m 1.513mTALPS8 2.770m 1.895m 8 11.5kg .550m 1.670mTALPS9 3.025m 2.125m 9 12.5kg .575m 1.850mTALPS10 3.275m 2.355m 10 13.5kg .600m 2.015m

CLOSED HEIGHT TONO. OF

OVERALL OVERALLREFERENCELENGTH PLATFORM

TREADS WEIGHTWIDTH SPAN(INC. PLATFORM)

AFS3 1.32m .725m 3 11kg .495m. .825mAFS4 1.57m .960m 4 12kg .520m. .997mAFS5 1.82m 1.195m 5 13kg .545m 1.120mAFS6 2.07m 1.430m 6 14kg .570m 1.280mAFS7 2.32m 1.665m 7 15kg .595m 1.425mAFS8 2.57m 1.900m 8 16kg .620m 1.565mAFS9 2.82m 2.135m 9 17kg .645m 1.705mAFS10 3.07m 2.370m 10 18kg .670m 1.847mAFS11 3.32m 2.605m 11 19kg .695m 1.985mAFS12 3.57m 2.840m 12 20kg .720m 2.125mAFS13 3.82m 3.075m 13 22kg .745m 2.285mAFS14 4.07m 3.310m 14 29kg .770m 2.445mAFS15 4.32m 3.545m 15 31kg .795m 2.605mAFS16 4.57m 3.780m 16 34kg .820m 2.765m*AFS17 4.82m 4.015m 17 36kg .845m 2.925m*AFS18 5.07m 4.250m 18 38kg .870m 3.085m*AFS19 5.32m 4.485m 19 40kg .895m 3.245m*AFS20 5.57m 4.720m 20 45kg .920m 3.405m*AFS21 5.82m 4.995m 21 47kg .945m 3.565m*AFS22 6.07m 5.190m 22 49kg .970m 3.725m*AFS23 6.32m 5.425m 23 52kg .995m 3.885m*AFS24 6.57m 5.660m 24 54kg 1.020m 4.045m

KM 05129Kitemarked

BS2037 1994

KM 05129Kitemarked

BS2037 1994

0115 986 6851 • 0115 986 2221

30 S W I N G B A C K S T E P SA

LU

MIN

IUM

Trade Pattern Swingback Step - TLAS Range

Heavy Duty Swingback Step - AS Range

TRADE PATTERN SWINGBACK STEP• 89mm deep treads• Kitemark BS 2037 Class1

REFERENCECLOSED OPEN NO. OF

WEIGHTOVERALL OVERALL

LENGTH HEIGHT TREADS WIDTH SPAN

T.LAS3 0.85m .720m 3 4kg .400m .685mT.LAS4 1.105m .965m 4 5kg .425m .820mT.LAS5 1.360m 1.200m 5 6kg .450m .915mT.LAS6 1.615m 1.435m 6 7kg .475m 1.075mT.LAS7 1.870m 1.655m 7 8kg .500m 1.230mT.LAS8 2.120m 1.895m 8 9kg .525m 1.395mT.LAS9 2.375m 2.130m 9 10kg .550m 1.555mT.LAS10 2.625m 2.360m 10 11kg .575m 1.706mT.LAS11 2.880m 2.585m 11 12.5kg .600m 1.870mT.LAS12 3.135m 2.820m 12 13.5kg .625m 2.035m

REFERENCECLOSED OPEN NO. OF


LENGTH HEIGHT TREADS WIDTH SPAN

AS3 0.81m .710m 3 7kg .370m .575mAS4 1.07m .945m 4 8kg .395m .740mAS5 1.32m 1.180m 5 9kg .420m .862mAS6 1.58m 1.415m 6 10kg .445m 1.03mAS7 1.84m 1.650m 7 11kg .470m 1.225mAS8 2.10m 1.885m 8 12kg .495m 1.395mAS9 2.36m 2.120m 9 13kg .520m 1.519mAS10 2.62m 2.355m 10 14Kg .545m 1.683mAS11 2.88m 2.590m 11 16Kg .570m 1.838mAS12 3.14m 2.828m 12 18Kg .595m 1.999mAS13 3.40m 3.060m 13 19Kg .620m 2.190mAS14 3.66m 3.295m 14 20Kg .645m 2.355mAS15 3.92m 3.530m 15 22Kg .670m 2.520mAS16 4.18m 3.765m 16 25Kg .695m 2.685m*AS17 4.44m 4.00m 17 26Kg .720m 2.85m*AS18 4.70m 4.235m 18 29Kg .745m 3.015m*AS19 4.96m 4.470m 19 32Kg .770m 3.180m*AS20 5.22m 4.705m 20 35Kg .795m 3.345m

HEAVY DUTY SWINGBACK STEP• 89mm deep treads• Kitemark BS 2037 Class1

KM 05129Kitemarked

BS2037 1994

KM 05129Kitemarked

BS2037 1994


31S W I N G B A C K S T E P

D O U B L E S I D E D S T E PA

LU

MIN

IUM

Double Sided Step - DAS Range

Swingbackstep - ABS Range

REFERENCECLOSED OPEN NUMBER


LENGTH HEIGHT OF TREADS WIDTH SPAN

DAS4 1.07m .945m 4 8kg .390m .990mDAS5 1.32m 1.180m 5 9kg .415m 1.180mDAS6 1.58m 1.415m 6 10kg .440m 1.370mDAS7 1.84m 1.650m 7 11kg 4.65m 1.580mDAS8 2.10m 1.885m 8 13kg .490m 1.750mDAS9 2.36m 2.120m 9 14kg .515m 1.940mDAS10 2.62m 2.355m 10 15kg .540m 2.130m

REFERENCECLOSED OPEN NUMBER


LENGTH HEIGHT OF TREADS WIDTH SPAN

ABS2 .655m .478m 2 4Kg .460m .515mABS3 .900m .718m 3 5Kg .480m .650mABS4 1.140m .940m 4 6Kg .500m .870mABS5 1.395m 1.190m 5 7Kg .550m .980mABS6 1.625m 1.425m 6 8Kg .570m 1.140m

DOUBLESIDED STEP• Double sided folding step• 89mm treads• Kitemark BS2037 Class 1

SWINGBACKSTEP• Alternative to TLAS model• 180mm wide top tread• 89mm deep treads• Kitemark BS2037 Class 1

KM 05129Kitemarked

BS2037 1994

KM 05129Kitemarked

BS2037 1994

0115 986 6851 • 0115 986 2221

32F I X E D P L AT F O R M S T E P S D O U B L E / S I N G L E S I D E D

AL

UM

INIU

M

Handrail across rear only Handrail one sideHandrail one side andacross rear

Double Sided

SINGLE SIDED• Single side fixed platform step• Platform 610mm x 380mm• 89mm deep treads• Variation can be made to order• Handrails fitted to various styles please

state which side• Wheels optional extra• Handrails now fitted with kick plates

DOUBLE SIDED• Double sided fixed platform step• Platform 610mm x 380mm• 89mm deep treads• Variations can be made to order• Handrail can be fitted to one side

or both• Handrail now fitted with kick plate

REFERENCEHEIGHT TO NO. OF

WEIGHTMAX OVERALL MAX OVERALL

PLATFORM TREADS WIDTH SPAN

DPD02 .475m 2 8kg .435m 1.010mDPD03 .710m 3 10kg .460m 1.205mDPD04 .945m 4 12kg .485m 1.405mDPD05 1.180m 5 15kg .510m 1.600mDPD06 1.415m 6 17kg 535m 1.800mDPD07 1.645m 7 19kg 565m 2.000mDPD08 1.880m 8 23kg 590m 2.200m

REFERENCEHEIGHT TO NO. OF TREADS

WEIGHTMAXIMUM

PLATFORM (INC. PLATFORM) OVERALL WIDTH

DPS01 .240m 1 6kg .415mDPS02 .475m 2 7kg .435mDPS03 .710m 3 9kg .460mDPS04 .945m 4 10kg .485mDPS05 1.180m 5 11kg .510mDPS06 1.415m 6 12kg .535mDPS07 1.645m 7 14kg .565mDPS08 1.880m 8 15kg .590m

SINGLE SIDED

DOUBLE SIDED


33F O L D I N G T R E S T L E

L I G H T W E I G H T S TA G I N GA

LU

MIN

IUM

FOLDING TRESTLE• Heavy duty hinges• Side stays• Kitemark BS2037 Class 1

Folding Trestle - ATL Range

REFERENCE CLOSED LENGTHHEIGHT TO TOP OVERALL

WIDTH WEIGHTBAR WHEN OPEN SPAN

ATL1 2.24m 2.01m 1.46m 810mm 16KgATL2 2.74m 2.46m 1.76m 860mm 19KgATL3 3.24m 2.96m 2.06m 910mm 23kgATL4 3.74m 3.42m 2.36m 960mm 26kg

LIGHTWEIGHT STAGINGS • Box Section alloy stiles• Antislip Timber decking• Kitemark BS2037 Class1

SHS 4560 STAGING HANDRAIL POST Fully adjustable & suitable for 450mm &600mm wide stagings. Handrail post allowsfor fixing of double handrail / guardrail.SHR 300 HANDRAIL/GUARDRAILALUMINIUM TUBE (6mtr length).For use with SHS 4560 POST.

Lightweight Stagings - STA Range

SIZESCODE NO. CODE NO.

ALLOY (450mm) ALLOY (600mm)

2.44m 8’0” STA08A STA08AX3.05m 10’0” STA10A STA10AX3.66m 12’0” STA12A STA12AX4.27m 14’0” STA14A STA14AX4.88m 16’0” STA16A STA16AX5.50m 18’0” STA18A STA18AX6.08m 20’0” STA20A STA20AX6.70m 22’0” STA22A STA22AX7.32m 24’0” STA24A STA24AX

KM 05129Kitemarked

BS2037 1994

0115 986 6851 • 0115 986 2221

34 U N I V E R S A L F O L D I N G L A D D E RA

LU

MIN

IUM

Splay Leg - UNASL Range

Straight Leg - UNAS Range

WORK PLATFORM• Versatile ladder• Single ladder, double sided ladder trestle, work

platform, star ladder etc• Easy to store, fits in a car boot• Patented hinge ensures smooth operation• More than 13 different working conditions

CODE NO. SIZE A B C KG

UNA 43SL 4 X 3 102cm 180cm 370cm 11.5kgUNA 44SL 4 X 4 130cm 235cm 483cm 17.0kgUNA 43EP 4 X 3 102cm 180cm 370cm 14.0kg

SPLAY LEG

CODE NO. SIZE A B C KG

UNA 43S 4 X 3 103cm 181cm 372cm 12.0kgUNA 44S 4 X 4 132cm 236cm 486cm 17.5kg

STRAIGHT LEG

Work Platform

WORK PLATFORM• Silver anodised aluminium-no more dirty hands• Made to European Trade Standard, EN131• Maximum permissible load 150kg• Platform supplied separately or as standard with UNA 43EP


35T E L E S C O P I C E X T E N D A N D C L I M B

T I G E R C O M B I N AT I O N L A D D E RA

LU

MIN

IUM

TELESCOPIC EXTEND AND CLIMB• Ideal for loft access internal or external

maintenance & decorating• Strong and robust• Easy to use• Easily stored in a car boot • Safely extends to 3.8m

• Locks rung by rung• Certified to EN131• Closed length 0.76m• Weight 11kg• Optional extra carrying case• Order code TEL38

TIGER• Fully adjustable step and ladder• All aluminium construction plus titanium

anodised inner section for extra smoothsliding operation

• Patented 3pin auto locking hinge andBigFeet

• EN131 Trade Duty rating 150kg

CODE NO. RUNGS DIMENSIONS WEIGHT

Length As Extension Length As Step TFL16 4 X 4 Ladder From Ladder From 12kg

238 - 410cm 116 - 192cm

Length As Extension Length As Step TFL20 4 X 5 Ladder From Ladder From 15kg

295 - 524cm 144 - 248cm

Telescopic Extend and Climb

Tiger

0115 986 6851 • 0115 986 2221

36 LO F T L A D D E R SA

LU

MIN

IUM

HEAVY DUTY LOFT LADDER• Spring controlled operation• Treads 400mm wide x 90mm deep• Complete with one handrail, operating

pole and all fixings

Other types available, please call for details.

CONSERTINA LOFT LADDER• Supplied fully assembled for immediate

installation• Space saving-fits loft opening down to

600mm x 500mm wide and requiresalmost no inside loft clearance

• Spring controlled operation• Strong, safe construction with extra

wide treads (80mm) for comfort• Complete with trap door hinges, catch

and pole hook

Heavy Duty Loft Ladder

Consertina Loft Ladder

REFERENCE WEIGHT

AL1 UPTO 2.54mts (8’4”) 19kg

AL2 2.57m TO 2.82m (8’5”/ 9’3”) 20kg

AL3 2.84m TO 3.10m ((9’4”/10’2”) 22kg

AL4 3.12m TO 3.38m (10’3”/ 11’1”) 23kg

AL5 3.40m TO 3.66m (11’2”/12’.0”) 25kg

CODE NO. TREADS HEIGHT

TAF10 10 For Ceiling Height 252-273cm

TAF11 11 For Ceiling Height 279-300cm


37A

LU

MIN

IUM

N AT I O N A L G R I D L A D D E R S& F I T T I N G S

NATIONAL GRID LADDERS • Ladders manufactured from hollow

aluminium rectangular sections withradiused corners for extra strength

• Rungs of 30mm dia. corrugated tubefitted through the stiles at a standardrise of 250mm by a special lockingmethod to prevent turning and forincreased strength

• Overall width of ladder 355mm • Ends of ladders fitted with rubber plugs

National Grid Fittings

ALUMINIUM FITTINGS• To National Grid Standard 151201 -

January 1984

CODESAFE

PROOFMIN.

NO.ITEM WEIGHT WORKING

LOADFAILING

LOAD LOAD

15/12/353Ladder fitting - 3kg

180kg 270kg 540kgConductor Hook each

15/12/354Ladder fitting - Support 1.5

180kg 270kg 540kgPlates (for above) kg/pr

15/12/356Ladder fitting - Tower 5 225kg 335kg

675kgHook Type A (tubular) kg/pr each each

15/12/357Ladder fitting - 13kg

180kgs 270kgs 540kgTower Hook Type B each

15/12/358Ladder fitting - 3.5 225kg 335kg

675kgTower Plate kg/pr each each

15/12/364Ladder fitting - Alt. 6.5 225kg 335kg

675kgType Hook A (flat bar) kg/pr each each

15/12/365Ladder fitting - 3 kg

180kg 270kg 540kgSwivel Hook each

15/12/366Ladder fitting - 12

90kg 135kg 270kgSplice Plate kg/pr

CODESAFE

PROOFMIN.

NO.ITEM WEIGHT WORKING

LOADFAILING

LOAD LOAD

15/12/376Aluminium Ladder -

11kg 180kg 270kg 540kgDual Purpose - 15 rungs






25kg 180kgs 270kgs 540kgDual Purpose - 23 rungs



15/12/385 Aluminium Ladder -31kg 450kg 675kg 1350kg

Dual Purpose - 29 rungs

0115 986 6851 • 0115 986 2221

38 W A R E H O U S E S T E P S I N D E XW

AR

EH

OU

SE

ST

EP

S

Alloy Mobile Warehouse Step 39

Steel Mobile Warehouse Step 39

Dispensary Step 39

SPECIFICATIONSMaterials UsedSteps are manufactured from ERW tube to BS6323 PARTS-ERW1-KM.The materialsused in this range are recyclable.Together with our environmentally-friendly processesand practices we are consciously working towards a greener future for ourcustomers, our community and ourselves.

Unique Safety BarrierThe Klime-Ezee 5 - 15 and E-Series 5 - 15 Tread steps are immobilised by a patentedcentral fail-safe retractor mechanism which, when operated, performs the dualfunction of both acting as a braking system and at the same time forming a 'NOACCESS' barrier across the steps, thus protecting the safety and welfare of youroperative when using the equipment.The retractor gate is designed to lock the handlein position and is extremely light and easy to operate.The KE5 & KE6 have 2 x100mm dia. rear wheels and a single front retractable castor.The KE7-KE15 steps have2 x 120mm dia. rear wheels and 2 retractable front castors which are lifted from thefloor by use of a centrally mounted 'Access Barrier' retractor handle, thus allowingthe two large steel feet to impact with the floor to give maximum stability to youroperator.The amply sized top platform with kicking flat makes order picking, shelfaccess or maintenance both comfortable and safe.

Tread TypesWe offer two types of tread for our standard range of steps.They are manufacturedfrom steel to BS1449 PART 1 1983 CR4.All treads give maximum grip in anyenvironment.'M' Tread - Multi-Pattern pierced and raised metal tread.'P' Tread - PVC Anti-Slip covered metal tread.

Paint FinishThe finishing processes employed are universally applied in strict accordance with themanufacturers' guidelines. Our standard paint finish is applied using a reliable andefficient Electrostatic Paint Process.All products will be painted Pacific Blue asstandard or Signal Red if requested. Other colours can be supplied at extra cost.

Step MobilityAll our steps are fitted with rubber-tyred wheels and castors, providing easy controland mobility. Indeed, a force of only 5-10Kg is required to move our steps. Customerswill note that this is well below the 25Kg force determined by Health & SafetyExecutive.


39W

AR

EH

OU

SE

ST

EP

SW A R E H O U S E S T E P S

HEIGHT TO NO. OFOVERALL OVERALL OVERALLREFERENCE PLATFORM TREADS WEIGHTHEIGHT WIDTH SPANLENGTH (INC. PLATFORM)

AWS3 .720m 3 8Kg 1.432m .630m .995mAWS4 .933m 4 10Kg 1.643m .650m 1.110mAWS5 1.170m 5 12Kg 1.884m .670m 1.240mAWS6 1.400m 6 14Kg 2.110m .700m 1.350mAWS7 1.635m 7 16Kg 2.342m .720m 1.505mAWS8 1.875m 8 19Kg 2.580m .740m 1.600mAWS9 2.095m 9 21Kg 2.805m .770m 1.755mAWS10 2.365m 10 24Kg 3.077m .800m 1.835mAWS11 2.560m 11 26Kg 3.270m .820m 1.975mAWS12 2.808m 12 29Kg 3.510m .835m 2.110mAWS13 3.043m 13 32Kg 3.750m .855m 2.235mAWS14 3.284m 14 35Kg 3.994m .880m 2.360mAWS15 3.525m 15 38Kg 4.235m .905m 2.490mAWS16 3.766m 16 41Kg 4.476m .930m 2.620mAWS17 3.975m 17 44Kg 4.665m .975m 2.825mAWS18 4.248m 18 47Kg 4.958m .980m 2.950mAWS19 4.480m 19 50Kg 5.190m 1.005m 3.075mAWS20 4.730m 20 53Kg 5.440m 1.030m 3.200m

ALUMINIUM MOBILE WAREHOUSE STEP• Heavy duty• Platform 530mm deep

x 400mm wide• Treads 89mm deep

• Handrail to both sides• Wheels at rear• 150kg rating

NO. OF HEIGHT TOOVERALL OVERALL OVERALLREFERENCE TREADS TOP TREAD HEIGHT WIDTH SPAN(INC. PLATFORM)

H2 2 .500m 1.240m .600m .700mH3 3 .750m 1.490m .760m .700mH4 4 1.000m 1.740m .920m .700mH5 5 1.250m 2.165m 1.195m .835mH6 6 1.500m 2.415m 1.350m .835mH7 7 1.750m 2.665m 1.490m .850mH8 8 2.000m 2.915m 1.615m .850mH9 9 2.250m 3.165m 1.770m .850mH10 10 2.500m 3.415m 1.945m 1.000mH11 11 2.750m 3.665m 2.110m 1.000mH12 12 3.000m 3.915m 2.270m 1.000mH13 13 3.250m 4.165m 2.150m 1.160mH14 14 3.500m 4.415m 2.670m 1.230mH15 15 3.750m 4.665m 2.830m 1.320m

STEEL MOBILE WAREHOUSE STEP • Various sizes & models mobiles• Bespoke models available

DISPENSARY STEP• C/W hand pole• Anti-slip treads

• Light weight for easypositioning

CODEHEIGHT TO

WIDTH DEPTH WEIGHTTOP TREAD

2STEPDIS 450mm 500mm 450mm 6kg

Aluminium MobileWarehouse Step - AWS Range

Steel Mobile Warehouse Step

Dispensary Step

0115 986 6851 • 0115 986 2221

40 A C C E S S O R I E S I N D E XA

CC

ES

SO

RIE

S

Top Stability Devices 41

Pole Work Bows 42

Miscellaneous 42

Base Stability Devices 43

Ladder Staging System 44

There are numerous ways in which we can now enhance the stability of ladders.

Adding a bracket to the top or bottom of a ladder will increase the overall stability greatly

The Working at Height Law requests that we use stability devices where practicable to do so.

SCHEDULE 6REQUIREMENTS FOR LADDERS

5.A portable ladder shall be prevented from slipping during use by -

(a) securing the stiles at or near their upper or lower ends;

(b) an effective anti-slip or other effective stability device; or

(c) any other arrangement of equivalent effectiveness.


41T O P S TA B I L I T Y D E V I C E SA

CC

ES

SO

RIE

S

• All these brackets add stability to the ladder• If you have a different requirement then let us design a bracket for you

Type A - Detachable forwall and corner use

The Spyder top stabiliser

Type B - Fixed to ladderfor wall and corner use

Type C - Detachable Forwall use, wider thannormal fitted with wheels

Type D - Detachable foruse on cabin / flat wall

Standard StandoffBrackett

Smooth Surface Suction Clamp

0115 986 6851 • 0115 986 2221

42P O L E W O R K B O W SM I S C E L L A N E O U S

AC

CE

SS

OR

IES

G.F. Bow Fix Bow ‘A’ Bow

Wire Bow ‘V’ Bow ‘B’ Bow

‘I’ Bow Web Bow CC Rope

Ladder Tags for inspection &identification

Roof Rack Clamp Sets to secure laddersand steps

POLE WORK BOWS• Various pole bows for different sized columns• Bows usually purchased with security rope and clamcleat

MISCELLANEOUS


43B A S E S TA B I L I T Y D E V I C E SA

CC

ES

SO

RIE

S

• Universal Devices• Improved Stability• Safe Working

Fixed Off Shore Octopus Foot

Articulated Octopus Foot Suction Foot

Rubber Blocks for timber ladders

Stopper Base anti-slipLaddermate anti-slipdevice

Multistopper feet & baseanti-slip & levelling device

Level-Eze auto levelling device

Trench Ladder Bracket

0115 986 6851 • 0115 986 2221

44 L A D D E R S TA G I N G S Y S T E MA

CC

ES

SO

RIE

S

• Accepted by the HSE as a safealternative to ‘footing’

• Completely stabilises the ladder andeliminates ladder ‘bounce’

• Easily and quickly fitted to any ladder• Permanent fitting - stays with the ladder• Positioned in less than one minute• Adjustable legs for uneven ground

• Can be used alone but if used togetherwith two ladders which are fitted withladder stabilisers (as in the pictureabove) this provides an exceptionallysecure and safe high level work platformwhich meets the approval of your H&SInspector

• Very strong steel construction• Simple to use• Easily assembled and dismantled• Can be assembled by one man• Low cost• Utilises your existing ladders• Up to 3 metre work-span• 270kg load rating - evenly distributed

Ladder Staging Brackets Ladder Stabiliser

45Risk Assessment guidelines for use of LEANING LADDERS Post equipment selection

Name of person completing assessment:

Site:

Activity: Using Leaning Ladders for access or as a work place for cleaning, maintenance, painting,decoration, ceiling work, electrical work, plumbing, inspections etc.

Hazards (most common):

Overreaching1. Ladder becomes unstable2. User, Ladder, tools fall3. User, Ladder, tools strike persons below

Sideways loading e.g. drilling:1. User pushed himself and Ladder off balance and falls2. User, Ladder, tools strike person below

People at Risk: Users and others on site.

Control Measures:

My Leaning Ladder My Answers Yes No

Are my Leaning Ladder manufacturer’s instructionsavailable and have I read and understood them? Is itstrong enough for task?

Is my Leaning Ladder capable of reaching theworking height? Can I erect it at correct angle?

Have I checked my Leaning Ladder for wear, tear,and damage affecting safety? (e.g. rungs, stiles anddents. If in doubt don’t use it).

Does my Leaning Ladder conduct electricity? Do Ineed a non-conducting Leaning Ladder e.g. live faultfinding.

Can I carry my Leaning Ladder and position it safelywithout slipping, tripping or falling?

Is my footwear OK for working on a LeaningLadder?

Losing balance:1. User loses balance2 User grabs Ladder and Ladder becomes

unstable3. User, Ladder, tools fall4. User, Ladder, tools strike persons below

##

46 My Job and Place My Answers Yes No

Number of people working on ladder (max one person)

Ground conditions (must be firm, level and stable).Should Ladder be secured?

Leaning surface conditions (must be strong, firm andstable).Should ladder be secured?

Do weather conditions allow safe use of LeaningLadder? (e.g. lightning, wind, rain, snow, ice,temperature and sun)

Frequency of use and duration of task without abreak (not to exceed 30 minutes)

Danger of electrical shock (No LIVE electricalconductors within a dangerous proximity).

Can I carry materials, equipment and tools, climbladder and work safely maintaining a handhold?

Can I place Ladder to avoid overreaching andsideways-on loading on each task?

Could sudden unexpected movement cause me tofall off Ladder and how serous are theconsequences of falling?

Should I segregate the working area around Ladderto protect it and other personnel?

Reconsider level of risk if tasks change or if sitechange.

Level of Risk: In view of the ‘Controls’ my Leaning Ladder is suitable for the task and site, a ladderhaving already been selected.

Signature Date

47Risk Assessment guidelines for use of STEPLADDERS Post equipment selection

Name of person completing assessment:

Site:

Activity: Using Stepladders for access or as a work place for cleaning, maintenance, painting,decoration, ceiling work, electrical work, plumbing, inspections etc.

Hazards (most common):

Overreaching1. Steps become unstable2. User, Steps, tools fall3. User, Steps, tools strike persons below

Sideways loading e.g. drilling:1. User pushed himself off Steps and falls2. User, Steps, tools strike person below

People at Risk: Users and others on site.

Control Measures:

My Stepladder My Answers Yes No

Are my Stepladder manufacturer’s instructionsavailable and have I read and understood them? Is itstrong enough for task?

Is my Stepladder strong enough?

Is my Stepladder capable of reaching the working height?

Have I checked my Stepladder for wear, tear, anddamage affecting safety? (e.g. hinges, rivets and dents.If in doubt don’t use it).

Does my Stepladder conduct electricity? Do I needa non-conducting Stepladder e.g. live fault finding.

Can I carry my Stepladder and position it safelywithout slipping, tripping or falling?

Is my footwear OK for working on a Stepladder?

Losing balance:1. User loses balance2. User grabs Steps and Steps become

unstable3. User, Steps, tools fall4. User, Steps, tools strike persons below

##

48 My Job and Place My Answers Yes No

Number of people working on Stepladder (max one person)

Ground conditions (must be firm, level and stable).

Do weather conditions allow safe use of Stepladder?(e.g. lightning, wind, rain, snow, ice, temperature andsun)

Frequency of use and duration of task without abreak (not to exceed 30 minutes)

Danger of electrical shock (No LIVE electricalconductors within a dangerous proximity).

Can I carry materials, equipment and tools, climbStepladder and work safely maintaining a handhold?

Can I place Stepadder to avoid overreaching andsideways-on loading on each task?

Could sudden unexpected movement cause me tofall off Stepladder and how serous are theconsequences of falling?

Should I segregate the working area aroundStepladder to protect it and other personnel?

Reconsider level of risk if tasks change or if sitechange.

Level of Risk: In view of the ‘Controls’ my Leaning Ladder is suitable for the task and site, a ladderhaving already been selected.

Signature Date

COMPANY PROFILEBratts have been making ladders since 1895.We supply every major electricity company in the UK with non-conductive access equipment.We also supply telecom and gas utilities, chemical, oil, rail, aviation, construction and similarindustries worldwide.We are the only manufacturer of BS1129 Class 1 Kitemark Timber and BS EN131 Kitemark GlassFibre ladders, stepladders and specialist access products for industrial use.We are therefore in aunique position to offer information on both. We also supply a large range of BS2037 Class 1Kitemark Aluminium ladders and stepladders.The British Standard Kitemark (BS) is only awarded to products that pass strict regular testing to ahigher standard than EN131.This guarantees you continuous audited quality.All our Glass Fibre products also comply with ANSI 14-5 and ESI 13-1.We worked with the HSE (Health and Safety Executive) to help produce the Work at HeightRegulations and the HSE Guidance for Employees.We can therefore advise on ladder andstepladder use within these procedures.We are members of the LA (Ladder Association) and LaSMA (Ladders & Systems ManufacturersAssociation).We also sit on the B/512 Ladder and Stepladder Standards Committee at the British StandardsInstitute with the HSE, DTi, and our EEC partners.In response to requests from a number of major companies we have recently developed the SafeLadder System© which has proved very successful.

Bratts can manufacture access equipment to your specification, quote for repairs, run certifiedtraining courses and advise on maintenance routines.

Ladder Specifications

British Standard Class 1 BS 2037 (Aluminium) or BS 1129 (Wood) or BS 7377 (Step-stools) - Heavy Industrial UseDuty rating 130kg (26.5 stone) - Maximum vertical static load 175kg.

BS EN131 and EN131 (Previous Class 2) - Light Trade UseDuty rating 115kg (18 stone) - Maximum vertical static load 150kg.

British Standard Class 3 BS 2037 (Aluminium) or BS 1129 (Wood) - Domestic DIY UseDuty rating 95kg (15 stone) - Maximum vertical static load 125kg.

It is important that you choose the ladders that best fit your needs. E.g. If you are a builder ortradesman you should use Class 1 or BS EN131 products as per the HSE guidance.

Even if you are looking at ladders for home use you need to think about buying equipment thatmeets the EN 131 standard.They will be safer, last longer and probably work out more economicalover the longer term.

If you do not find anything suitable in this catalogue please contact us we will bemore than happy to assist you.

TEL: 0115 986 6851 or 2221FAX: 0115 986 1991E-mail: [email protected]: www.brattsladders.com

BESPOKE DESIGNS

A SMALL SAMPLE OF CUSTOMER’S

PROBLEMS SOLVED

A. BRATT & SON LIMITED Abbeyfield Road, Lenton Ind. Est., Nottingham. NG7 2SZ

Tel: (0115) 986 6851 / 986 2221 Fax: (0115) 986 1991

www.brattsladders.comFM 30770

A.BRATT & SON LIMITED Abbeyfield Road,Lenton Ind… · A.BRATT & SON LIMITED Abbeyfield Road,Lenton...

Documents

Transcript of A.BRATT & SON LIMITED Abbeyfield Road,Lenton Ind… · A.BRATT & SON LIMITED Abbeyfield Road,Lenton...