Bovu Fluid Holdings

About us Bovu Fluid Holdings is internationally recognized as one of South Africa’s most

respected manufacturers and distributors of Construction and Mining equipment.Our head office and factory is based in Meyerton, with branch offices in Witbank as well as a network of agents and distributors throughout South Africa and Africa

We were registered as a company in 2000 by Mr Edward Bovu who’s philosophy is to maintain a high level of service with a strong ethical and moral foundation, a philosophy that remains a cornerstone of our business today.

Apart from our own manufactured equipment, Bovu Fluid Holdings also do Dredging and Industrial Cleaning (Vacuuming and High Pressure), enabling us to provide product and a service solutions to a broad range of industries including: construction, mines/quarries, shipyards/harbours, plumbing/drainage road/traffic and petrochemical. We are also well known suppliers of equipment to municipalities throughout Africa.

Please enjoy browsing our cd and do not hesitate to contact us to request a quotation or any product information you might require. Our sales staff have a wealth of experience in all spheres of our business and will be glad to assist.

Bovu is in operation since 2000

Our servicesPump SalesPump RentalPump RepairDredgingDewatering and DesludgingIndustrial Cleaning (vacuum and High

Pressure)And More

Pumps

How a pump work

Selwood Pump

Selwood Contractor Pump range has been designed to provide greater cost efficient fluid handling solutions for all users. The Contractor range offers efficiency levels of 83% which translate into benefits for the end user and the environment. Fuel usage is minimised through the redesigned hydraulic pump end, impeller and wear plates.

Contractor Pumps are a true self-priming pump so does not require manual priming of the suction line or filling of a priming tank in order to begin its normal operation.

In addition the pump can run dry for extended periods due to the oil bath mechanical seal assembly which allows priming with long suction hoses and suction lifts of up to 9 m. As fluid levels fluctuate, the pump will “snore” until the time liquid is available for the pump to fully re-prime itself automatically.

Features Applications

Reduced engine sizes Construction Lower maintenance costs Low fuel usage Dry self prime and reprime Environmental Suction lifts to 9m Industrial Operates in 'snore' conditions Mining Conversion kits for WellPoint dewatering Sewage

and high heads Liquids Diesel, electric or hydraulic drive Sludge Solids handling up to 90mm Slimes Simple maintenance Solids Handling Replaceable wear parts Clean Water Chassis - skid, road tow, wheeled, caged Zero emissions available

Pump flowTested pump flow of a BP3434c21

SewageMud, Silt & Slurry

Oil

Rags & FibresHeavy Iron Oxide

Pump Applications

Spate pump

Features of Spate pump

● Indefinite dry running● Automatic priming● Flows up to 30m3/h ● 30m Delivery head● 9meter suction lift● Robust● Simple maintenance● Handles crude oil, sand, grit and more● Max. solids size 6mm 

Dredging

Dredger busy working

Auger Dredging

 Canal creation trough wet areas  Deep-water mineral recovery  Cleaning dams and sludge separation  Diamond dredging Hazardous waste materials  Jetty building  Marina/Harbor dredging  Material handling  Pipeline trenching wet/dry areas  Pipe lying through swamp/mangrove areas  Pre contract survey work  Removal of sludge Repairs and sealing of dams Underwater recovery of Sand, Clay sediments,   Coal fines,   Fly/volcanic ash,   Industrial waste,   Lime/Alum sludge,   Oil/ A.P.I. Sludge and   Raw sewage

Dredging Applications 

Excavator Dredging

Excavator with Long rich boom

Some of our Excavators

Sludge Dredging Plantation Dredging,Dredging of reeds

Dredging of Fly-ash

Amphibians Excavator

Amphibious excavator with a Bell Hydraulic submersible pump

A Bovu Amphitrex is an amphibiousexcavator that can travel and work effectively on soft terrain such as swamps, wetlands and water 

Bell Hydraulic submersible pump

Industrial Cleaning (Vacuuming)

Unblocking of piping

Vacuuming with Super sucker

Suction Powerof the super sucker

Industrial Cleaning(HP Jetting)

Vacuum trucksThe unit is designed for maximum reliability and simplicity,

resulting in lower maintenance costs, less downtime and greater productivity.

 These units are designed for the following:Surface Preparation & CleaningCoating RemovalTube CleaningStripe RemovalVessel & Tank CleaningSewer JettingPipe Cleaning

More infoFor more info Contact usEdward Bovu, 0839684674Carin Louw, 0836085346André Louw, 0611366983Micheal Horn 0836085347Head Office, 016 362 2571Witbank, 013 692 6824